def set_up_sub_joint(base_axis, new_axis, Post, Post1, Ant, Ant1, Zyg_ant,
Zyg_post, inter, cent_D, cent_V, cent_L, cent_R, Pcent_D,
Pcent_V, Pcent_L, Pcent_R):
#Set up intersection
cmds.polyCBoolOp(Ant1, Post1, op=3, n=inter)
#Set up parenting relationships
cmds.parent(Ant1, Ant)
cmds.parent(Zyg_ant, Ant)
#centrum objects
cmds.parent(cent_D, Ant)
cmds.parent(cent_V, Ant)
cmds.parent(cent_L, Ant)
cmds.parent(cent_R, Ant)
#axis
cmds.parent(base_axis, Ant)
cmds.parent(Post1, Post)
cmds.parent(Zyg_post, Post)
#centrum objects
cmds.parent(Pcent_D, Post)
cmds.parent(Pcent_V, Post)
cmds.parent(Pcent_L, Post)
cmds.parent(Pcent_R, Post)
#Create joint center locator
cmds.spaceLocator(n=new_axis)
cmds.matchTransform(new_axis, base_axis)
cmds.parent(new_axis, base_axis)
cmds.parent(Post, new_axis)
def BU_IntersectionPreserveMeshes():
selection = cmds.ls(sl=True)
# If you don't have exactly two meshes selected it ends the function
if len(selection) > 2 or len(selection) < 2:
print "You have to select two elements"
return
firstObj = selection[0]
secondObj = selection[1]
# I duplicate the objects to use it again
firstObjCopy = cmds.duplicate(firstObj)
secondObjCopy = cmds.duplicate(secondObj)
# This will be used later as well
secondObjCopy2 = cmds.duplicate(secondObj)
# First I do the difference between the first and the second object
cmds.polyCBoolOp(firstObj, secondObj, op=2)
# Then I do the intersection
intersObj = cmds.polyCBoolOp(firstObjCopy, secondObjCopy, op=3)
# This will get preserve all the meshes used for the intersection
intersObjCopy = cmds.duplicate(intersObj)
cmds.polyCBoolOp(secondObjCopy2, intersObjCopy, op=2)
def detectCollision(obj1, obj2, *args):
collided = None
duplicateInputRoom = cmds.duplicate(obj1,
n=obj1 + 'd',
renameChildren=True)
duplicateOutputRoom = cmds.duplicate(obj2,
n=obj2 + 'd',
renameChildren=True)
cmds.scriptEditorInfo(historyFilename=workspacePath + "log.txt",
writeHistory=True) #start noting the history
cmds.polyCBoolOp(duplicateInputRoom[0],
duplicateOutputRoom[0],
op=3,
n='auxIntersection') #try for warning
cmds.scriptEditorInfo(writeHistory=False) #stop recording information
with open(workspacePath + "log.txt", 'r') as f:
lines = f.readlines()
collided = len(
lines
) == 0 #if the file is empty of any error - then there is an intersection/collision
os.remove(workspacePath + "log.txt") #remove it
cmds.delete(duplicateInputRoom)
cmds.delete(duplicateOutputRoom)
cmds.delete('auxIntersection')
return collided
def makeRoundHoleBlock(blockDepth):
cubeDimX = 0.74
cubeDimY = 0.78
cubeDimZ = (blockDepth * 0.8) - (blockDepth*0.8/blockDepth)
# Make Block
block = cmds.polyCube(width=cubeDimX, height=cubeDimY, depth=cubeDimZ, ch=False)
cmds.move((cubeDimY/2.0), moveY=True)
# Make left endcap
endCap = cmds.polyCylinder(r=cubeDimY * 0.5, h=cubeDimX, ax=(1,0,0), ch=False )
cmds.move( (cubeDimZ * 0.5), moveZ=True, a=True)
cmds.move( (cubeDimY * 0.5), moveY=True, a=True)
block = cmds.polyCBoolOp( block[0], endCap[0], op=1, ch=False )
# Make right endcap
endCap = cmds.polyCylinder(r=cubeDimY * 0.5, h=cubeDimX, ax=(1,0,0), ch=False )
cmds.move( (cubeDimZ * -0.5), moveZ=True, a=True)
cmds.move( (cubeDimY * 0.5), moveY=True, a=True)
block = cmds.polyCBoolOp( block[0], endCap[0], op=1, ch=False )
cmds.xform(centerPivots = True )
for z in range(blockDepth):
block = makeBeamHole( block, z , cubeDimX, cubeDimY, cubeDimZ )
block = makeBeamPipe( block, z , cubeDimX, cubeDimY, cubeDimZ )
return block
def makeBeamPipe( block, x, cubeDimX, cubeDimY, cubeDimZ ):
innerPipe = cmds.polyPipe( r=cubeDimY * 0.5, h=cubeDimX*2, t=0.05, ax=(1,0,0) )
innerAdd = cmds.polyPipe( r=cubeDimY * 0.45, h=cubeDimX*1.64, t=0.1, ax=(1,0,0) )
inner = cmds.polyCBoolOp( innerPipe[0], innerAdd[0], op=1, ch=False )
cmds.move( (x*0.8) - (cubeDimZ/2.0), moveZ= True, a=True)
cmds.move( (cubeDimY * 0.5), moveY= True, a=True)
block = cmds.polyCBoolOp( block[0], inner[0], op=1, ch=False )
return block
def createGear():
teeth = 16
teethLength = 0.2
# name
nsTmp = "Gear" + str(rnd.randint(1000, 9999))
cmds.select(clear=True)
cmds.namespace(add=nsTmp)
cmds.namespace(set=nsTmp)
# query colour from UI
rgb = cmds.colorSliderGrp('gearColour', q=True, rgbValue=True)
# base
gear = cmds.polyCylinder(r=0.7, h=0.4, sx=32)
# extrude teeth
for i in range(31):
if (i % 2 == 0):
cmds.select(gear[0] + ".f[" + str(i) + "]")
cmds.polyExtrudeFacet(ltz=0.1)
cmds.polyExtrudeFacet(ltz=0.1)
cmds.polyMoveFacet(lsx=0.5)
# decor
tmp = cmds.polyCylinder(r=0.6, h=0.2)
cmds.move(0.2, moveY=True, a=True)
gear = cmds.polyCBoolOp(gear, tmp, op=2, ch=False)
tmp = cmds.polyCylinder(r=0.6, h=0.2)
cmds.move(-0.2, moveY=True, a=True)
gear = cmds.polyCBoolOp(gear, tmp, op=2, ch=False)
# center
cylind = cmds.polyCylinder(r=0.3, h=0.6)
#create x shape
x = cmds.polyCube(w=0.5, h=0.6, d=0.2)
tmp = cmds.polyCube(w=0.2, h=0.6, d=0.5)
#combine them
x = cmds.polyCBoolOp(x, tmp, op=1)
x2 = cmds.duplicate(x)
# remove from center
cylind = cmds.polyCBoolOp(cylind, x, op=2)
# remove from base
gear = cmds.polyCBoolOp(gear, x2, op=2)
# add material
myShader = cmds.shadingNode('lambert', asShader=True, name="blckMat")
cmds.setAttr(nsTmp + ":blckMat.color",
rgb[0],
rgb[1],
rgb[2],
type='double3')
cmds.polyUnite((nsTmp + ":*"), n=nsTmp, ch=False)
cmds.move(0.3, moveY=True, a=True)
cmds.delete(ch=True)
cmds.hyperShade(assign=(nsTmp + ":blckMat"))
cmds.namespace(removeNamespace=":" + nsTmp, mergeNamespaceWithParent=True)
def createRoundedBlock( blockSizeX, blockSizeY, blockSizeZ, blockLength ):
edgeCylinderL = cmds.polyCylinder ( h = blockSizeZ, r = blockSizeY/2 )
cmds.rotate( 90, rotateX = True )
cmds.move( ( -blockSizeX/2 ), moveX = True, a=True)
edgeCylinderR = cmds.polyCylinder ( h = blockSizeZ, r = blockSizeY/2 )
cmds.rotate( 90, rotateX = True )
cmds.move( ( blockSizeX/2 ), moveX = True, a=True)
block = cmds.polyCube ( h = blockSizeY, w = blockSizeX, d = blockSizeZ, sx = ( blockLength - 1 ) * 2, sy = 2 )
block = cmds.polyCBoolOp( block, edgeCylinderL, op = 1 )
block = cmds.polyCBoolOp( block, edgeCylinderR, op = 1 )
return block
def RightBlock():
firstBlockDepth = cmds.intSliderGrp('firstAngleDepth',
query=True,
value=True)
secondBlockDepth = cmds.intSliderGrp('secondAngleDepth',
query=True,
value=True)
rgb = cmds.colorSliderGrp('angled90BlockColour', query=True, rgbValue=True)
cmds.select(clear=True)
cubeDimY = 1 * 0.96
cubeDimZ = firstBlockDepth * 0.8
firstBlock = makeRoundHoleBlock(firstBlockDepth)
secondBlock = makeRoundHoleBlock(secondBlockDepth)
cmds.move((cubeDimZ / 2.0), moveZ=True)
cmds.move((cubeDimZ / 2.0), moveY=True)
cmds.rotate('90deg', 0, 0, secondBlock[0])
finalShape = cmds.polyCBoolOp(firstBlock[0], secondBlock[0], op=1)
# Adding on the colour
myShader = cmds.shadingNode('lambert', asShader=True, name="blockMaterial")
cmds.setAttr(myShader + ".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.select(finalShape, r=True)
cmds.hyperShade(assign=myShader)
cmds.namespace(set=":")
def connector():
rgb = cmds.colorSliderGrp('miscColour', query=True, rgbValue=True)
cX = 1.6
cY = 0.6
cZ = 0.6
cMiddle = cmds.polyCylinder( h = 1.6/2, r = 0.5/2, sz = 1 )
cmds.rotate( 90, rotateZ = True )
cmds.move( (1.6/2)/2, moveX = True )
cInsideRidge = cmds.polyCylinder( h = 0.1, r = cY/2, sz = 1 )
cmds.rotate( 90, rotateZ = True )
cmds.move( 0.1/2, moveX = True )
cOutsideRidge = cmds.polyTorus( sr = 0.05, r = (cY/2.6))
cmds.rotate( 90, rotateZ = True )
cmds.move( (cX/2) - (0.08/2), moveX = True )
connector = cmds.polyCBoolOp( cMiddle, cInsideRidge, op = 1 )
connector = cmds.polyCBoolOp( connector, cOutsideRidge, op = 1 )
cCut = createRoundedBlock( cY * 0.6, cY * 0.2, 5, 2 )
cmds.move( cY + 0.1, moveX = True )
connector = cmds.polyCBoolOp( connector, cCut, op = 2 )
cMCut = cmds.polyCylinder( h = 1.6, r = 0.45/2, sz = 1 )
cmds.rotate( 90, rotateZ = True )
cmds.move( (1.6/2)/2, moveX = True )
connector = cmds.polyCBoolOp( connector, cMCut, op = 2 )
connectorL = cmds.duplicate( connector )
cmds.scale( -1, scaleX = True )
cmds.move( -(1.6/2), moveX = True )
connector = cmds.polyUnite( connector, connectorL)
myShader = cmds.shadingNode( 'phong', asShader=True )
cmds.setAttr( myShader+".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.setAttr( myShader+".reflectivity", 0 )
cmds.select( connector )
cmds.hyperShade( assign = myShader )
cmds.delete( ch = True )
def HoleConnector():
components = []
# Fetching slider data
rgb = cmds.colorSliderGrp('HoleColour', query=True, rgbValue=True)
cmds.select(clear=True)
cubeDimX = 0.74
cubeDimY = 0.78
# Inner tube
innerCyl = cmds.polyPipe( r=cubeDimY * 0.40, h=cubeDimX*3.85, t=0.1, ax=(1,0,0), ch=False )
# End Ring
endCyl1 = cmds.polyPipe( r=cubeDimY * 0.45, h=cubeDimX*0.1, t=0.05, ax=(1,0,0), ch=False )
cmds.move(cubeDimX*1 - (cubeDimX*0.05),0,0)
midShape = cmds.polyCBoolOp( innerCyl[0], endCyl1[0] , op=1, ch=False)
# Subtraction cube
endCube1 = cmds.polyCube(width=0.5, height=0.09, depth=1, ch=False)
cmds.move(cubeDimX*1 - (cubeDimX*0.15),0,0)
midShape = cmds.polyCBoolOp( midShape[0], endCube1[0], op=2, ch=False )
# End Ring 2
endCyl2 = cmds.polyPipe( r=cubeDimY * 0.45, h=cubeDimX*0.1, t=0.05, ax=(1,0,0), ch=False )
cmds.move((cubeDimX*0.05) - cubeDimX*1,0,0)
midShape = cmds.polyCBoolOp( midShape[0], endCyl2[0] , op=1, ch=False)
# Subtraction cube 2
endCube2 = cmds.polyCube(width=0.5, height=0.09, depth=1, ch=False)
cmds.move((cubeDimX*0.15) - cubeDimX*1,0,0)
midShape = cmds.polyCBoolOp( midShape[0], endCube2[0], op=2, ch=False )
outerCyl1 = cmds.polyPipe( r=cubeDimY * 0.45, h=cubeDimX*0.2, t=0.05, ax=(1,0,0),ch=False )
finalShape = cmds.polyCBoolOp( midShape[0], outerCyl1[0], op=1, ch=False )
# Adding on the color
shadedShape = addShader(finalShape, rgb)
def booleanLoop(legacy=False):
#1. Make an array of all selections
target = mc.ls(sl=1)
if (legacy):
#2. Boolean union each item in the array to the next
for i in range(0,len(target)-1,2):
mc.polyBoolOp(target[i],target[i+1])
#3. Delete construction history
mc.delete(ch=True)
#4. Recenter the pivot
mc.xform(cp=True)
else:
mc.polyCBoolOp()
mc.delete(ch=True)
def booleanLoop(legacy=False):
#1. Make an array of all selections
target = mc.ls(sl=1)
if (legacy):
#2. Boolean union each item in the array to the next
for i in range(0, len(target) - 1, 2):
mc.polyBoolOp(target[i], target[i + 1])
#3. Delete construction history
mc.delete(ch=True)
#4. Recenter the pivot
mc.xform(cp=True)
else:
mc.polyCBoolOp()
mc.delete(ch=True)
def connector():
connectorLength = cmds.intSliderGrp('connectorLength', q=True, v=True)
connectorSizeX = (1 * 0.8) - 0.1
connectorSizeY = (1 * 0.8) - 0.1
connectorSizeZ = (connectorLength * 0.4)
rgb = cmds.colorSliderGrp('blockColour', q=True, rgbValue=True)
connector = cmds.polyCylinder(r=(connectorSizeX/2.0),h=connectorSizeZ, sh=6)
cmds.rotate(90,rotateX=True)
cmds.move((connectorSizeY/2.0), moveY=True, a=True)
connectorName = cmds.ls(connector)[0]
cmds.select(connectorName+".e[40:99]")
cmds.scale(0.8, 0.8, 0.8, relative=True)
cmds.select(connectorName+".e[40:59]")
cmds.move(-0.13, moveZ=True,r=True)
cmds.select(connectorName+".e[80:99]")
cmds.move(0.13, moveZ=True,r=True)
axelShape = cmds.polyCube(h = 0.19, w=(connectorSizeZ+0.2), d=0.19)
cmds.move((connectorSizeY/2.0), moveY=True, a=True)
axelName = cmds.ls(axelShape)[0]
cmds.select(axelName+".f[0]")
cmds.select(axelName+".f[1]", add=True)
cmds.select(axelName+".f[2]", add=True)
cmds.select(axelName+".f[3]", add=True)
cmds.polyExtrudeFacet(lt=(0,0,0.15), kft=False)
cmds.select(axelShape)
cmds.polyBevel(sg=2, oaf=True, fn=True)
cmds.rotate(90, rotateY=True)
if(connectorLength == 2):
cmds.select(connectorName+".e[242]")
cmds.select(connectorName+".e[246]", add=True)
cmds.move(-0.05, moveY=True, relative=True)
cmds.select(connectorName+".e[252]")
cmds.select(connectorName+".e[256]", add=True)
cmds.move(0.05, moveY=True, relative=True)
cmds.select(connector)
cmds.select(axelShape, add=True)
connector = cmds.polyCBoolOp(op=2, ch=False, n="Connector" + str(rnd.randint(1000,9999)))
applyMaterial(connector, rgb)
cmds.delete(ch=True)
def createBlockHoles( blockSizeX, blockSizeY, block, blockLength, blockOffset ):
hcList = []
rcyList = []
rcuList = []
for j in range( blockLength ):
#create cylinders to cut holes
holeCylinder = cmds.polyCylinder( r = 0.24, h = 2, sz=1 )
cmds.rotate( 90, rotateX = True )
cmds.move((blockSizeY/2), moveY = True, a = True)
cmds.move(((j * 0.8) - (blockSizeX/2.0) + blockOffset ), moveX = True, a = True)
hcList.append( holeCylinder )
#create cylinders to cut sunken area around holes
##create a cylinder
ridgeCylinder = cmds.polyCylinder( r=0.31, h=2, sz=1 )
cmds.rotate( 90, rotateX = True )
cmds.move((blockSizeY/2), moveY = True, a = True)
cmds.move(((j * 0.8) - (blockSizeX/2.0) + blockOffset ), moveX = True, a = True)
rcyList.append( ridgeCylinder )
##create a cube
ridgeCube = cmds.polyCube ( h = 0.64, w = blockSizeY, d = blockSizeY )
cmds.rotate( 90, rotateX = True )
cmds.move((blockSizeY/2), moveY=True )
cmds.move(((j * 0.8) - (blockSizeX/2.0) + blockOffset ), moveX=True )
rcuList.append( ridgeCube )
if len( hcList ) > 1 :
holeCylinders = cmds.polyUnite( *hcList )
ridgeCylinders = cmds.polyUnite( *rcyList )
ridgeCubes = cmds.polyUnite( *rcuList )
else:
holeCylinders = hcList[0]
ridgeCylinders = rcyList[0]
ridgeCubes = rcuList[0]
block = cmds.polyCBoolOp( block, holeCylinders, op=2 )
ridgeCutter = cmds.polyCBoolOp( ridgeCylinders, ridgeCubes, op=2 )
block = cmds.polyCBoolOp( block, ridgeCutter, op=2 )
return block
def addToCollisionUnion(self, obj):
unionAmounts = len(self.collisionUnions)
if self.blockIndex >= 15 * unionAmounts: #amount of blocks in a single union
cmds.rename(obj, "collisionUnion" + str(len(self.collisionUnions)))
self.collisionUnions.append("collisionUnion" +
str(len(self.collisionUnions)))
else:
self.collisionUnions[unionAmounts - 1] = cmds.polyCBoolOp(
self.collisionUnions[unionAmounts - 1], obj, op=1, ch=False)[0]
def BU_DiffIntersection():
selection = cmds.ls(sl=True)
# If you don't have exactly two meshes selected it ends the function
if len(selection) > 2 or len(selection) < 2:
print "You have to select two elements"
return
firstObj = selection[0]
secondObj = selection[1]
# I duplicate the objects to use it again
firstObjCopy = cmds.duplicate(firstObj)
secondObjCopy = cmds.duplicate(secondObj)
# First I do the difference between the first and the second object
cmds.polyCBoolOp(firstObj, secondObj, op=2)
# Then I do the intersection
cmds.polyCBoolOp(firstObjCopy, secondObjCopy, op=3)
def HoleBlock():
# Initialize the building blocks and the subtraction blocks
components = []
subtracts = []
blockDepth = cmds.intSliderGrp('HoleblockDepth', query=True, value=True)
rgb = cmds.colorSliderGrp('HoleblockColour', query=True, rgbValue=True)
cmds.select(clear=True)
blockWidth = 1
cubeDimX = blockWidth * 0.8
blockHeight = 1
cubeDimY = blockHeight * 0.96
cubeDimZ = blockDepth * 0.8
cube = cmds.polyCube(h=cubeDimY, w=cubeDimX, d=cubeDimZ, sz=blockDepth)
cmds.move((cubeDimY / 2.0), moveY=True)
# Pipes on top of block
for i in range(blockDepth):
components.append(cmds.polyPipe(r=0.24, h=0.36, thickness=0.09)[0])
cmds.move((cubeDimY + 0.10), moveY=True, a=True)
cmds.move(((i * 0.8) - (cubeDimZ / 2.0) + 0.4), moveZ=True, a=True)
# Holes within block
for k in range(blockDepth - 1):
holes = cmds.polyCylinder(h=1, r=0.24, ax=(1, 0, 0))
subtracts.append(holes[0])
cmds.move(0,
cubeDimY - 0.38, ((k * 0.8) - (cubeDimZ / 2.0) + 0.8),
holes[0],
a=True)
# Unite the cube and the top
addShape = cmds.polyUnite(cube, components, ch=False)
currentHole = subtracts[0]
for hole in range(len(subtracts) - 1):
uniteHole = cmds.polyUnite(currentHole, subtracts[hole + 1], ch=False)
currentHole = uniteHole
finalShape = cmds.polyCBoolOp(addShape, uniteHole, op=2, ch=False)[0]
# Adding on the colour
myShader = cmds.shadingNode('lambert', asShader=True, name="blockMaterial")
cmds.setAttr(myShader + ".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.select(finalShape, r=True)
cmds.hyperShade(assign=myShader)
cmds.namespace(set=":")
def HoleBlock():
# Initialize the building blocks and the subtraction blocks
components = []
subtracts = []
# Fetching slider data
blockDepth = cmds.intSliderGrp('HoleblockDepth', query=True, value=True)
rgb = cmds.colorSliderGrp('HoleblockColour', query=True, rgbValue=True)
cmds.select(clear=True)
blockWidth = 1
cubeDimX = blockWidth * 0.8
blockHeight = 1
cubeDimY = blockHeight * 0.96
cubeDimZ = blockDepth * 0.8
cube = cmds.polyCube(h=cubeDimY, w=cubeDimX, d=cubeDimZ, sz=blockDepth, ch=False)
cmds.move((cubeDimY/2.0), moveY=True)
# Pipes on top of block
for i in range(blockDepth):
components.append(cmds.polyPipe(r=0.24, h=0.36, thickness=0.09, ch=False)[0])
cmds.move((cubeDimY + 0.10), moveY=True, a=True)
cmds.move(((i * 0.8) - (cubeDimZ/2.0) + 0.4), moveZ=True, a=True)
# Holes within block
for k in range(blockDepth - 1):
holes = cmds.polyCylinder( h=1, r=0.24, ax=(1,0,0), ch=False)
subtracts.append(holes[0]);
cmds.move( 0, cubeDimY - 0.38, ((k*0.8) - (cubeDimZ/2.0) + 0.8), holes[0], a=True)
# Unite the cube and the top
addShape = cmds.polyUnite(cube, components, ch=False)
currentHole = subtracts[0]
# Unite all of the holes for a boolean subtraction
for hole in range(len(subtracts)- 1):
uniteHole = cmds.polyUnite(currentHole, subtracts[hole+1], ch=False)
currentHole = uniteHole
finalShape = cmds.polyCBoolOp(addShape, currentHole, op=2, ch=False)[0]
# Adding on the colour
shadedShape = addShader(finalShape, rgb)
def createBeamIndents(block, blockDepth, blockSizeX, blockSizeY, blockSizeZ):
beam = block
indentArray = []
for i in range(blockDepth):
#h = 0.6 (same as outer holes),
#w = 0.15 (estimate for space between),
#d = 0.35 (estimate based on image)
indent = cmds.polyCube(h=0.6, w=0.15, d=0.35, sy=3)
cmds.move((blockSizeX/2.0), moveX = True, a = True)
cmds.move((blockSizeY/2.0), moveY = True, a = True)
cmds.move(((i * 0.8) - (blockSizeZ/2.0)+0.65), moveZ = True)
indentName = cmds.ls(indent)[0]
cmds.select(indentName+'.vtx[2:5]')
cmds.move(0, 0, -0.1, r=True)
cmds.select(indentName+'.vtx[10:13]')
cmds.move(0, 0, 0.1, r=True)
indentArray.append(indent)
indent = cmds.polyCube(h=0.6, w=0.15, d=0.4, sy=3)
cmds.move((-1*(blockSizeX/2.0)), moveX = True, a = True)
cmds.move((blockSizeY/2.0), moveY = True, a = True)
cmds.move(((i * 0.8) - (blockSizeZ/2.0)+0.65), moveZ = True)
indentName = cmds.ls(indent)[0]
cmds.select(indentName+'.vtx[2:5]')
cmds.move(0, 0, -0.1, r=True)
cmds.select(indentName+'.vtx[10:13]')
cmds.move(0, 0, 0.1, r=True)
indentArray.append(indent)
cmds.select(clear=True)
#combine hourglass shaped indents into one polygon
for indent in indentArray:
cmds.select(indent, add=True)
indents = cmds.polyUnite(ch=False)
cmds.select(clear=True)
cmds.select(beam)
cmds.select(indents, add=True)
finalBlock = cmds.polyCBoolOp(op=2, ch=False)
return finalBlock
def axle():
axleLength = cmds.intSliderGrp( 'axleLength', query = True, value = True)
rgb = cmds.colorSliderGrp('miscColour', query=True, rgbValue=True)
axleX = axleLength * 0.8
axleY = 0.4
axleZ = 0.4
hAxle = cmds.polyCube( w = axleX, h = axleY/2, d = axleZ )
vAxle = cmds.polyCube( w = axleX, h = axleY, d = axleZ/2 )
axle = cmds.polyCBoolOp( hAxle, vAxle, op = 1 )[0]
myShader = cmds.shadingNode( 'phong', asShader=True )
cmds.setAttr( myShader+".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.setAttr( myShader+".reflectivity", 0 )
cmds.select( axle )
cmds.hyperShade( assign = myShader )
cmds.delete( ch = True )
def createRack():
rgb = cmds.colorSliderGrp('rackColour', q=True, rgbValue=True)
# name
nsTmp = "Rack" + str(rnd.randint(1000, 9999))
cmds.select(clear=True)
cmds.namespace(add=nsTmp)
cmds.namespace(set=nsTmp)
# base
rack = cmds.polyCube(h=0.6, w=1.5, d=6, sz=24)
# extrude teeth
for i in range(24):
if (i % 2 == 1):
cmds.select(rack[0] + ".f[" + str(i) + "]")
cmds.polyExtrudeFacet(ltz=0.3)
cmds.polyExtrudeFacet(ltz=0.3)
cmds.polyMoveFacet(lsx=0.1)
tmp = cmds.polyCube(h=0.6, w=1.5, d=2)
cmds.move(-3.753, moveZ=True)
rack = cmds.polyCBoolOp(rack, tmp, op=2)
tmp = cmds.polyCube(h=0.6, w=1.5, d=2)
# add material
myShader = cmds.shadingNode('lambert', asShader=True, name="blckMat")
cmds.setAttr(nsTmp + ":blckMat.color",
rgb[0],
rgb[1],
rgb[2],
type='double3')
cmds.polyUnite((nsTmp + ":*"), n=nsTmp, ch=False)
cmds.move(0.4, moveY=True, a=True)
cmds.delete(ch=True)
cmds.hyperShade(assign=(nsTmp + ":blckMat"))
cmds.namespace(removeNamespace=":" + nsTmp, mergeNamespaceWithParent=True)
def createRoundedBeams(block, blockSizeX, blockSizeY, blockSizeZ):
endCyl1 = cmds.polyCylinder(r=(blockSizeY/2.0), h=blockSizeX)
cmds.rotate(90, rotateX=True)
cmds.rotate(90, rotateY=True)
cmds.move((blockSizeY/2.0), moveY=True)
cmds.move((blockSizeZ/2.0), moveZ=True, a=True)
endCyl2= cmds.polyCylinder(r=(blockSizeY/2.0), h=blockSizeX)
cmds.rotate(90, rotateX=True)
cmds.rotate(90, rotateY=True)
cmds.move((blockSizeY/2.0), moveY=True)
cmds.move((-blockSizeZ/2.0), moveZ=True, a=True)
cmds.select(block)
cmds.select(endCyl1, add=True)
cmds.select(endCyl2, add=True)
#combine cylindrical ends with rectangle using union boolean
#joins them but removes intersecting parts
roundedBlock = cmds.polyCBoolOp(op=1,ch=False)
return roundedBlock
def makeBeamHole( block, z, cubeDimX, cubeDimY, cubeDimZ ):
hole = cmds.polyCylinder( r=cubeDimY * 0.45, h=cubeDimX, ax=(1,0,0), ch=False )
cmds.move( (z * 0.8) - (cubeDimZ/2.0), moveZ= True, a=True)
cmds.move( (cubeDimY * 0.5), moveY= True, a=True)
block = cmds.polyCBoolOp( block[0], hole[0], op=2, ch=False )
return block
def uniformVoroPoints(self):
'''
Performs voronoi uniform fragmentation
'''
# duplicate original shape
mVoroInputMeshFn = OpenMaya.MFnMesh(self._mVoroInputMeshDAG)
mPoints = OpenMaya.MPointArray()
mVerticesCount = OpenMaya.MIntArray()
mVerticesList = OpenMaya.MIntArray()
mVoroInputMeshFn.getPoints(mPoints, OpenMaya.MSpace.kWorld)
mVoroInputMeshFn.getVertices(mVerticesCount, mVerticesList)
mNumPoly = mVoroInputMeshFn.numPolygons()
mCopyMeshFn = OpenMaya.MFnMesh()
mCopyTrs = mCopyMeshFn.create(mPoints.length(), mNumPoly, mPoints, mVerticesCount, mVerticesList)
mDagPath = OpenMaya.MDagPath()
OpenMaya.MDagPath.getAPathTo(mCopyTrs, mDagPath)
mMeshName = mDagPath.fullPathName()
# create boolean op between sphere and duplicated shape
mRadius = cmds.getAttr(self._mVoroImpactShape + '.radius')
mRadius = max(.15, mRadius)
mImpact = cmds.polySphere(r = mRadius, sx = 8, sy = 8)
cmds.xform(mImpact[0], translation = [self._mOriginPt.x, self._mOriginPt.y, self._mOriginPt.z])
cmds.select(clear = True)
mVolume = None
if int(cmds.about(version = True).split()[0]) > 2014:
try:
mVolume = cmds.polyCBoolOp(mMeshName, mImpact[0], op = 3, ch = False, classification = 1, n = 'IS_Volume')
except:
pass
else:
try:
mVolume = cmds.polyBoolOp(mMeshName, mImpact[0], op = 3, ch = False, n = 'IS_Volume')
except:
pass
cmds.flushUndo()
# Check if mVolume is valid
if mVolume:
if cmds.polyEvaluate(mVolume, face = True) == 0:
cmds.delete(mVolume)
mVolume = cmds.polySphere(r = mRadius, sx = 8, sy = 8)
else:
mVolume = cmds.polySphere(r = mRadius, sx = 8, sy = 8)
# Fill volume of the boolean object with points
mSelection = OpenMaya.MSelectionList()
mSelection.add(mVolume[0])
mSelection.getDagPath(0, mDagPath)
mDagPath.extendToShape()
mVerts = OpenMaya.MPointArray()
triangleCounts, triangleVertices = OpenMaya.MIntArray(), OpenMaya.MIntArray()
mVolMeshFn = OpenMaya.MFnMesh(mDagPath)
mVolMeshFn.getPoints(mVerts, OpenMaya.MSpace.kWorld)
mVolMeshFn.getTriangles(triangleCounts, triangleVertices)
numTriangles = triangleVertices.length() / 3
mHitPoint = OpenMaya.MFloatPoint()
mFloatRaySource = OpenMaya.MFloatPoint()
mFloatRayNormal = OpenMaya.MFloatVector()
# Randomly select a face, find a point on face surface (with bary coords) and launch a ray from the reversed normal
mAccelerationStructure = mVolMeshFn.autoUniformGridParams()
for n in xrange(self._mVoroCount):
triId = rand.randint(0, numTriangles-1)
v0 = triangleVertices[3 * triId + 0]
v1 = triangleVertices[3 * triId + 1]
v2 = triangleVertices[3 * triId + 2]
mVectorAB = mVerts[v1] - mVerts[v0]
mVectorAC = mVerts[v2] - mVerts[v0]
mNormal = (mVectorAB ^ mVectorAC) * -1.0
mNormal.normalize()
u = rand.uniform(0.0,1.0)
v = rand.uniform(0.0, (1.0 - u))
mSample = (mVerts[v0] + mVectorAB * u + mVectorAC * v) + (mNormal * 0.001)
mFloatRaySource.x, mFloatRaySource.y, mFloatRaySource.z = mSample.x, mSample.y, mSample.z
mFloatRayNormal.x, mFloatRayNormal.y, mFloatRayNormal.z = mNormal.x, mNormal.y, mNormal.z
hit = mVolMeshFn.closestIntersection(
mFloatRaySource,
mFloatRayNormal,
None,
None,
None,
OpenMaya.MSpace.kWorld,
99999,
None,
mAccelerationStructure,
mHitPoint,
None,
None,
None,
None,
None
)
if hit:
mDistance = mFloatRaySource.distanceTo(mHitPoint)
self._mVoroPoints.append(mSample + (mNormal * rand.uniform(0.0, mDistance)))
mVolMeshFn.freeCachedIntersectionAccelerator()
cmds.delete(mVolume)
# hide IShatter sphere helper
cmds.setAttr(self._mVoroImpactTrs + '.visibility', False)
cmds.setAttr(self._mVoroImpactShape + '.radius', 0.0001)
cmds.xform(self._mVoroImpactTrs, translation = [0.0, 0.0, 0.0])
self._mView.refresh(False, True)
# update fractureFX
mel.eval("fxEraseParticles " + self._mVoroParticleObject)
mVoroParticleSysFn = OpenMayaFX.MFnParticleSystem(self._mVoroParticleSysDAG)
mVoroParticleSysFn.emit(self._mVoroPoints)
mVoroParticleSysFn.saveInitialState()
def angularBeam():
horizontalLength = cmds.intSliderGrp('horizontalLength', query=True, value=True)
angledLength = cmds.intSliderGrp('angledLength', query=True, value=True)
angleSelected = cmds.radioButtonGrp('angleDegree', query=True, select=True)
angleDegree = angleArray[angleSelected]
leftCross = cmds.checkBox('leftCrossCheck', query = True, value = True)
rightCross = cmds.checkBox('rightCrossCheck', query = True, value = True)
rgb = cmds.colorSliderGrp('beamColour', query=True, rgbValue=True)
holeOffset = 0.0;
cubeSizeH = (horizontalLength - 1) * 0.8
cubeSizeA = (angledLength - 1) * 0.8
cubeSizeZ = 0.8
cubeSizeY = 0.8
horizontalCube = createRoundedBlock( cubeSizeH, cubeSizeY, cubeSizeZ, horizontalLength )
cmds.move(( cubeSizeY / 2.0 ), moveY = True )
if( leftCross == True ):
holeOffset = 0.8
horizontalCube = createBlockHoles( cubeSizeH, cubeSizeY, horizontalCube, horizontalLength - 1, holeOffset )
hCross = cmds.polyCube( w = 0.62, h = 0.31, d = 3 )
vCross = cmds.polyCube( w = 0.31, h = 0.62, d = 3 )
cross = cmds.polyCBoolOp( hCross, vCross, op = 1 )[0]
cmds.move( -(cubeSizeH/2), cubeSizeY/2, 0 )
horizontalCube = cmds.polyCBoolOp( horizontalCube, cross, op = 2 )[0]
else:
horizontalCube = createBlockHoles( cubeSizeH, cubeSizeY, horizontalCube, horizontalLength, holeOffset )
angledCube = createRoundedBlock( cubeSizeA, cubeSizeY, cubeSizeZ, angledLength )
cmds.move(( cubeSizeY / 2.0 ), moveY = True )
if( rightCross == True ):
holeOffset = 0.0
angledCube = createBlockHoles( cubeSizeA, cubeSizeY,angledCube, angledLength - 1, holeOffset )
hCross = cmds.polyCube( w = 0.62, h = 0.31, d = 3 )
vCross = cmds.polyCube( w = 0.31, h = 0.62, d = 3 )
cross = cmds.polyCBoolOp( hCross, vCross, op = 1 )[0]
cmds.move( cubeSizeA/2, cubeSizeY/2, 0 )
angledCube = cmds.polyCBoolOp( angledCube, cross, op = 2 )[0]
else:
holeOffset = 0.0
angledCube = createBlockHoles( cubeSizeA, cubeSizeY, angledCube, angledLength, holeOffset )[0]
cmds.move( ( - (cubeSizeA/2.0)), (cubeSizeY/2), 0, angledCube+".scalePivot", angledCube+".rotatePivot", absolute=True)
cmds.rotate( angleDegree, rotateZ = True )
cmds.move( ((cubeSizeH/2) + (cubeSizeA/2)), moveX = True )
angledBeam = cmds.polyUnite( horizontalCube, angledCube )
myShader = cmds.shadingNode( 'phong', asShader=True )
cmds.setAttr( myShader+".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.setAttr( myShader+".reflectivity", 0 )
cmds.select( angledBeam )
cmds.hyperShade( assign = myShader )
cmds.delete( ch = True )
def doubleAngularBeam():
horizontalLength = cmds.intSliderGrp('dHorizontalLength', query=True, value=True)
verticalLength = cmds.intSliderGrp('dVerticalLength', query=True, value=True)
angledLength = 3.8
leftCross = cmds.checkBox('leftCrossCheck', query = True, value = True)
rightCross = cmds.checkBox('rightCrossCheck', query = True, value = True)
rgb = cmds.colorSliderGrp('beamColour', query=True, rgbValue=True)
holeOffset = 0.0;
cubeSizeH = (horizontalLength - 1) * 0.8
cubeSizeA = 3.04
cubeSizeV = (verticalLength - 1) * 0.8
cubeSizeZ = 0.8
cubeSizeY = 0.8
beamAngle = 45
angledDistance = ( math.sin( math.radians(45))) * cubeSizeA
#create horizontal section of angled beam
horizontalCube = createRoundedBlock( cubeSizeH, cubeSizeY, cubeSizeZ, horizontalLength )
cmds.move(( cubeSizeY / 2.0 ), moveY = True )
if( leftCross == True ):
holeOffset = 0.8
horizontalCube = createBlockHoles( cubeSizeH, cubeSizeY, horizontalCube, horizontalLength - 1, holeOffset )
hCross = cmds.polyCube( w = 0.62, h = 0.31, d = 3 )
vCross = cmds.polyCube( w = 0.31, h = 0.62, d = 3 )
cross = cmds.polyCBoolOp( hCross, vCross, op = 1 )[0]
cmds.move( -(cubeSizeH/2), cubeSizeY/2, 0 )
horizontalCube = cmds.polyCBoolOp( horizontalCube, cross, op = 2 )[0]
else:
horizontalCube = createBlockHoles( cubeSizeH, cubeSizeY, horizontalCube, horizontalLength, holeOffset )
#create angled section of angled beam
angledCube = createRoundedBlock( cubeSizeA, cubeSizeY, cubeSizeZ, angledLength )
cmds.move(( cubeSizeY / 2.0 ), moveY = True )
#create left hole in angled beam section
holeCylinderL = cmds.polyCylinder( r = 0.24, h = 2, sz=1 )
cmds.rotate( 90, rotateX = True )
cmds.move((cubeSizeY/2), moveY = True, a = True)
cmds.move(( - (cubeSizeA/2.0)), moveX = True, a = True)
ridgeCylinderL = cmds.polyCylinder( r=0.31, h=2, sz=1 )
cmds.rotate( 90, rotateX = True )
cmds.move((cubeSizeY/2), moveY = True, a = True)
cmds.move(( - ( cubeSizeA / 2.0 )), moveX = True, a = True)
ridgeCubeL = cmds.polyCube ( h = 0.64, w = cubeSizeY, d = cubeSizeY )
cmds.rotate( 90, rotateX = True )
cmds.move(( cubeSizeY / 2 ), moveY=True )
cmds.move(( - (cubeSizeA/2.0)), moveX=True )
angledCube = cmds.polyCBoolOp( angledCube, holeCylinderL, op=2 )
ridgeCutterL = cmds.polyCBoolOp( ridgeCylinderL, ridgeCubeL, op=2 )
angledCube = cmds.polyCBoolOp( angledCube, ridgeCutterL, op=2 )
#create right hole in angled beam section
holeCylinderR = cmds.polyCylinder( r = 0.24, h = 2, sz=1 )
cmds.rotate( 90, rotateX = True )
cmds.move((cubeSizeY/2), moveY = True, a = True)
cmds.move(((angledLength * 0.8) - (cubeSizeA/2.0)), moveX = True, a = True)
ridgeCylinderR = cmds.polyCylinder( r=0.31, h=2, sz=1 )
cmds.rotate( 90, rotateX = True )
cmds.move((cubeSizeY/2), moveY = True, a = True)
cmds.move(((angledLength * 0.8) - (cubeSizeA/2.0)), moveX = True, a = True)
ridgeCubeR = cmds.polyCube ( h = 0.64, w = cubeSizeY, d = cubeSizeY )
cmds.rotate( 90, rotateX = True )
cmds.move((cubeSizeY/2), moveY=True )
cmds.move(((angledLength * 0.8) - (cubeSizeA/2.0)), moveX=True )
angledCube = cmds.polyCBoolOp( angledCube, holeCylinderR, op=2 )
ridgeCutterR = cmds.polyCBoolOp( ridgeCylinderR, ridgeCubeR, op=2 )
angledCube = cmds.polyCBoolOp( angledCube, ridgeCutterR, op=2 )
#create rounded rectangle cutout in angled beam section
holeBlock = createRoundedBlock( ( cubeSizeA - ( 0.8 * 2 )), 0.48, 2, angledLength )
cmds.move(( cubeSizeY / 2.0 ), moveY = True )
ridgeBlock = createRoundedBlock( ( cubeSizeA - ( 0.8 * 2 )), 0.62, 2, angledLength )
cmds.move(( cubeSizeY / 2.0 ), moveY = True )
ridgeCube = cmds.polyCube ( h = cubeSizeY, w = cubeSizeA, d = 0.64 )
cmds.move(( cubeSizeY / 2.0 ), moveY = True )
angledCube = cmds.polyCBoolOp( angledCube, holeBlock, op=2 )
ridgeCutter = cmds.polyCBoolOp( ridgeBlock, ridgeCube, op=2 )
angledCube = cmds.polyCBoolOp( angledCube, ridgeCutter, op=2 )
#move and rotate angled beam in to position
cmds.move( ( - (cubeSizeA/2.0)), (cubeSizeY/2), 0, angledCube[0]+".scalePivot",angledCube[0]+".rotatePivot", absolute=True)
cmds.rotate( beamAngle, rotateZ = True )
cmds.move( ((cubeSizeH/2) + (cubeSizeA/2)), moveX = True )
doubleBeam = cmds.polyUnite( horizontalCube, angledCube )
#create vertical section of angled beam
verticalCube = createRoundedBlock( cubeSizeV, cubeSizeY, cubeSizeZ, verticalLength )
cmds.move(( cubeSizeY / 2.0 ), moveY = True )
if( rightCross == True ):
holeOffset = 0.0
verticalCube = createBlockHoles( cubeSizeV, cubeSizeY, verticalCube, verticalLength - 1, holeOffset )
hCross = cmds.polyCube( w = 0.62, h = 0.31, d = 3 )
vCross = cmds.polyCube( w = 0.31, h = 0.62, d = 3 )
cross = cmds.polyCBoolOp( hCross, vCross, op = 1 )[0]
cmds.move( cubeSizeV/2, cubeSizeY/2, 0 )
verticalCube = cmds.polyCBoolOp( verticalCube, cross, op = 2 )[0]
else:
holeOffset = 0.0
verticalCube = createBlockHoles( cubeSizeV, cubeSizeY, verticalCube, verticalLength, holeOffset )
cmds.move( ( - (cubeSizeA/2.0)), (cubeSizeY/2), 0, angledCube[0]+".scalePivot",angledCube[0]+".rotatePivot", absolute=True)
cmds.rotate( 90, rotateZ = True )
cmds.move( (( cubeSizeH / 2 ) + angledDistance ), moveX = True )
cmds.move( (( cubeSizeV / 2 ) + angledDistance ), moveY = True )
doubleBeam = cmds.polyUnite( doubleBeam, verticalCube )
#add material
myShader = cmds.shadingNode( 'phong', asShader=True )
cmds.setAttr( myShader+".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.setAttr( myShader+".reflectivity", 0 )
cmds.select( doubleBeam )
cmds.hyperShade( assign = myShader )
cmds.delete( ch = True )
def makeBeamPipe(block, x, cubeDimX, cubeDimY, cubeDimZ):
hole = cmds.polyCylinder(r=cubeDimY * 0.45, h=cubeDimX, ax=(1, 0, 0))
cmds.move((x * 0.6) - (cubeDimZ / 2.0), moveZ=True, a=True)
cmds.move((cubeDimY * 0.5), moveY=True, a=True)
block = cmds.polyCBoolOp(block[0], hole[0], op=2)
return block
def rim():
#get values from UI
rimStyle = cmds.radioButtonGrp( 'rimStyle', query = True, select = True)
rgb = cmds.colorSliderGrp('wheelColour', query=True, rgbValue=True)
#set up variables
radius = 1.6
widthHalf = 2.1 / 2
if( rimStyle == 1 ):
mediumCircle = cmds.polyCylinder( h = widthHalf * 0.4, r = radius * 0.67 )
cmds.rotate( 90, rotateZ = True )
crossV = cmds.polyCube( w = widthHalf, h = 0.4, d = 0.2 )
crossH = cmds.polyCube( w = widthHalf, h = 0.2, d = 0.4 )
cross = cmds.polyCBoolOp( crossV, crossH, op = 1 )
cmds.move( widthHalf / 2, moveX = True )
mediumCircle = cmds.polyCBoolOp( mediumCircle, cross, op = 2 )
innerCircle = cmds.polyPipe( h = widthHalf * 0.3, r = radius * 0.33, t = 0.14 )
cmds.rotate( 90, rotateZ = True )
cmds.move( ((widthHalf * 0.4) / 2) + ((widthHalf * 0.3) / 2), moveX = True )
outerCircle = cmds.polyPipe( h = widthHalf, r = radius, t = 0.2 )
cmds.rotate( 90, rotateZ = True )
cmds.move( (((widthHalf * 0.4) / 2) + ((widthHalf * 0.5) / 2)) + 0.1, moveX = True )
outerCircleCut = cmds.polyPipe( h = widthHalf * 0.33, r = radius, t = 0.1 )
cmds.rotate( 90, rotateZ = True )
cmds.move( (((widthHalf * 0.4) / 2) + ((widthHalf * 0.5) / 2)) + 0.1, moveX = True )
outerCircle = cmds.polyCBoolOp( outerCircle, outerCircleCut, op = 2 )
slope = cmds.polyCone()
cmds.rotate( 90, rotateZ = True )
cmds.move( 0.810, moveX = True )
cmds.scale( 5.455, 1, 5.455 )
slopeCutL = cmds.polyCylinder( h = widthHalf, r = radius )
cmds.rotate( 90, rotateZ = True )
cmds.move( -( widthHalf / 2), moveX = True )
slopeCutR = cmds.polyCylinder( h = 4, r = radius * 10 )
cmds.rotate( 90, rotateZ = True )
cmds.move( 2.326, moveX = True )
slope = cmds.polyCBoolOp( slope, slopeCutL, op = 2 )[0]
slope = cmds.polyCBoolOp( slope, slopeCutR, op = 2 )[0]
cmds.delete( slope+".f[21]")
rimL = cmds.polyUnite( mediumCircle, innerCircle, outerCircle, slope )
cmds.move( (widthHalf*0.4)/2, moveX = True )
rimR = cmds.duplicate( rimL )
cmds.scale( -1, scaleX = True )
cmds.move( -((widthHalf*0.4)/2), moveX = True )
rim = cmds.polyUnite( rimR, rimL )
elif( rimStyle == 2 ):
radius = 1.5
circleList = []
mainCircle = cmds.polyCylinder( h = 0.4, r = radius - 0.2 )
innerCircle = cmds.polyCylinder( h = 0.5, r = radius * 0.2 )
hCross = cmds.polyCube( w = radius * 0.24, h = 3, d = radius * 0.1 )
vCross = cmds.polyCube( w = radius * 0.1, h = 3, d = radius * 0.24 )
cross = cmds.polyCBoolOp( hCross, vCross, op = 1 )[0]
rim = cmds.polyCBoolOp( mainCircle, innerCircle, op = 1 )
rim = cmds.polyCBoolOp( rim, cross, op = 2 )
lRidge = cmds.polyTorus( sr = 0.1, r = (radius * 0.9))
cmds.move( 0.4/2, moveY = True )
rRidge = cmds.polyTorus( sr = 0.1, r = (radius * 0.9))
cmds.move( -(0.4/2), moveY = True )
rim = cmds.polyCBoolOp( rim, lRidge, op = 1 )[0]
rim = cmds.polyCBoolOp( rim, rRidge, op = 1 )[0]
cutCircle = cmds.polyCylinder( h = 3, r = radius * 0.17 )[0]
cmds.move( 0, 0, 0.8)
cmds.move( 0, 0, 0, cutCircle+".scalePivot", cutCircle+".rotatePivot", absolute=True)
circleList.append( cutCircle )
for i in range( 0, 5):
cutCircle = cmds.duplicate( cutCircle )
cmds.rotate( 0, 60, 0, cutCircle, r = True )
circleList.append( cutCircle )
cutCircles = cmds.polyUnite( *circleList)
rim = cmds.polyCBoolOp( rim, cutCircles, op = 2 )
cmds.rotate( 90, rotateX = True )
myShader = cmds.shadingNode( 'phong', asShader=True )
cmds.setAttr( myShader+".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.setAttr( myShader+".reflectivity", 0 )
cmds.select( rim )
cmds.hyperShade( assign = myShader )
cmds.delete( ch = True )
def polyCBoolOp(*args, **kwargs):
res = cmds.polyCBoolOp(*args, **kwargs)
if not kwargs.get('query', kwargs.get('q', False)):
res = _factories.maybeConvert(res, _general.PyNode)
return res
def straightBeam():
#get values from UI
beamLength = cmds.intSliderGrp('beamLength', query=True, value=True)
leftCross = cmds.checkBox('leftCrossCheck', query = True, value = True)
rightCross = cmds.checkBox('rightCrossCheck', query = True, value = True)
rgb = cmds.colorSliderGrp('beamColour', query=True, rgbValue=True)
#set up variables
holeOffset = 0.0;
beamSizeX = ( beamLength - 1 ) * 0.8
beamSizeZ = 0.8
beamSizeY = 0.8
#hAxle = cmds.polyCube( w = axleX, h = axleY/2, d = axleZ )
#vAxle = cmds.polyCube( w = axleX, h = axleY, d = axleZ/2 )
#axle = cmds.polyCBoolOp( hAxle, vAxle, op = 1 )[0]
beam = createRoundedBlock( beamSizeX, beamSizeY, beamSizeZ, beamLength )
cmds.move(( beamSizeY / 2.0 ), moveY = True )
if( leftCross == True and rightCross == False):
holeOffset = 0.8
beam = createBlockHoles( beamSizeX, beamSizeY, beam, beamLength - 1, holeOffset )
hCross = cmds.polyCube( w = 0.62, h = 0.31, d = 3 )
vCross = cmds.polyCube( w = 0.31, h = 0.62, d = 3 )
cross = cmds.polyCBoolOp( hCross, vCross, op = 1 )[0]
cmds.move( -(beamSizeX/2), beamSizeY/2, 0 )
beam = cmds.polyCBoolOp( beam, cross, op = 2 )[0]
elif( leftCross == False and rightCross == True):
beam = createBlockHoles( beamSizeX, beamSizeY, beam, beamLength - 1, holeOffset )
hCross = cmds.polyCube( w = 0.62, h = 0.31, d = 3 )
vCross = cmds.polyCube( w = 0.31, h = 0.62, d = 3 )
cross = cmds.polyCBoolOp( hCross, vCross, op = 1 )[0]
cmds.move( (beamSizeX/2), beamSizeY/2, 0 )
beam = cmds.polyCBoolOp( beam, cross, op = 2 )[0]
elif( leftCross == True and rightCross == True):
holeOffset = 0.8
beam = createBlockHoles( beamSizeX, beamSizeY, beam, beamLength - 2, holeOffset )
hLCross = cmds.polyCube( w = 0.62, h = 0.31, d = 3 )
vLCross = cmds.polyCube( w = 0.31, h = 0.62, d = 3 )
lCross = cmds.polyCBoolOp( hLCross, vLCross, op = 1 )[0]
cmds.move( -(beamSizeX/2), beamSizeY/2, 0 )
beam = cmds.polyCBoolOp( beam, lCross, op = 2 )[0]
hRCross = cmds.polyCube( w = 0.62, h = 0.31, d = 3 )
vRCross = cmds.polyCube( w = 0.31, h = 0.62, d = 3 )
rCross = cmds.polyCBoolOp( hRCross, vRCross, op = 1 )[0]
cmds.move( beamSizeX/2, beamSizeY/2, 0 )
beam = cmds.polyCBoolOp( beam, rCross, op = 2 )[0]
else:
beam = createBlockHoles( beamSizeX, beamSizeY, beam, beamLength, holeOffset )
myShader = cmds.shadingNode( 'phong', asShader=True )
cmds.setAttr( myShader+".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.setAttr( myShader+".reflectivity", 0 )
cmds.select( beam )
cmds.hyperShade( assign = myShader )
cmds.delete( ch = True )
def createWheel():
# query UI choice
createTire = cmds.radioButtonGrp('wheelTire', q=True, sl=True)
createHub = cmds.radioButtonGrp('wheelHub', q=True, sl=True)
# create a tire
if (createTire == 1):
# name
nsTmp = "Tire" + str(rnd.randint(1000, 9999))
cmds.select(clear=True)
cmds.namespace(add=nsTmp)
cmds.namespace(set=nsTmp)
# query colour from UI
rgb = cmds.colorSliderGrp('tireColour', q=True, rgbValue=True)
# create cylinder for the base
tire = cmds.polyCylinder(r=3.5, h=3.5, sx=36)
# add a smaller sphere to round up the tire
tmp = cmds.polySphere(r=3.35, sy=15, sx=36)
cmds.scale(1.1, scaleY=True)
# remove non intersecting parts
tire = cmds.polyCBoolOp(tire, tmp, op=3, ch=False)
# Add texture:
# create cylinder as the base for texture at 1 side
texture1 = cmds.polyCylinder(r=2.8, h=1.75, sx=36)
# move it up
cmds.move(1.75 / 2, moveY=True, a=True)
# in range of subdivisions
for i in range(35):
#for all even numbers
if (i % 2 == 0):
cmds.select(texture1[0] + ".f[" + str(i) + "]")
# local translate on Z and scale x
cmds.polyExtrudeFacet(ltz=1, lsx=1.35)
# duplicate texture 1 for the 2nd side
texture2 = cmds.duplicate(texture1)
cmds.select(texture2)
cmds.move(-1.75 / 2, moveY=True, a=True)
cmds.rotate(10, rotateY=True, a=True)
# combine textures 1 and 2
texture = cmds.polyCBoolOp(texture1, texture2, op=1, ch=False)
# add a smaller sphere to round up the texture
tmp = cmds.polySphere(r=3.7, sy=13, sx=36)
# remove non intersecting parts
texture = cmds.polyCBoolOp(texture, tmp, op=3, ch=False)
cmds.polyMergeVertex(d=0.05, ch=False)
# create another cylinder for the hole
tmp = cmds.polyCylinder(r=2, h=3.5)
# remove it
tire = cmds.polyCBoolOp(tire, tmp, op=2, ch=False)
tmp = cmds.polyCylinder(r=2, h=3.5)
texture = cmds.polyCBoolOp(texture, tmp, op=2, ch=False)
# add material
myShader = cmds.shadingNode('lambert', asShader=True, name="blckMat")
cmds.setAttr(nsTmp + ":blckMat.color",
rgb[0],
rgb[1],
rgb[2],
type='double3')
cmds.polyUnite((nsTmp + ":*"), n=nsTmp, ch=False)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move(3.466, moveY=True, a=True)
cmds.delete(ch=True)
cmds.hyperShade(assign=(nsTmp + ":blckMat"))
cmds.namespace(removeNamespace=":" + nsTmp,
mergeNamespaceWithParent=True)
# create a hub
if (createHub == 1):
# name
nsTmp = "Hub" + str(rnd.randint(1000, 9999))
cmds.select(clear=True)
cmds.namespace(add=nsTmp)
cmds.namespace(set=nsTmp)
# query colour from UI
rgb = cmds.colorSliderGrp('hubColour', q=True, rgbValue=True)
# base
hub = cmds.polyCylinder(r=2.1, h=2.8)
# outline
tmp = cmds.polyCylinder(r=1.6, h=2.8)
hub = cmds.polyCBoolOp(hub, tmp, op=2, ch=False)
# inner part of the hub
hubIn = cmds.polyCylinder(r=1.6, h=1.8)
# center
hubCenter = cmds.polyCylinder(r=0.3, h=2.4)
hubIn = cmds.polyCBoolOp(hubIn, hubCenter, op=2, ch=False)
# decor parts
d1 = cmds.polyCylinder(r=0.4, h=2.8)
cmds.move(-0.85, moveX=True, a=True)
cmds.move(-0.03, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d1, op=1, ch=False)
# subtract smaller cylinder inside
d1c = cmds.polyCylinder(r=0.3, h=2.9)
cmds.move(-0.85, moveX=True, a=True)
cmds.move(-0.03, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d1c, op=2, ch=False)
d3 = cmds.polyCylinder(r=0.4, h=2.8)
cmds.move(-0.422, moveX=True, a=True)
cmds.move(0.648, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d3, op=1, ch=False)
# subtract smaller cylinder inside
d3c = cmds.polyCylinder(r=0.3, h=2.9)
cmds.move(-0.422, moveX=True, a=True)
cmds.move(0.648, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d3c, op=2, ch=False)
d4 = cmds.polyCylinder(r=0.4, h=2.8)
cmds.move(0.416, moveX=True, a=True)
cmds.move(0.627, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d4, op=1, ch=False)
# subtract smaller cylinder inside
d4c = cmds.polyCylinder(r=0.3, h=2.9)
cmds.move(0.416, moveX=True, a=True)
cmds.move(0.627, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d4c, op=2, ch=False)
d5 = cmds.polyCylinder(r=0.4, h=2.8)
cmds.move(0.835, moveX=True, a=True)
cmds.move(-0.049, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d5, op=1, ch=False)
# subtract smaller cylinder inside
d5c = cmds.polyCylinder(r=0.3, h=2.9)
cmds.move(0.835, moveX=True, a=True)
cmds.move(-0.049, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d5c, op=2, ch=False)
d6 = cmds.polyCylinder(r=0.4, h=2.8)
cmds.move(0.431, moveX=True, a=True)
cmds.move(-0.692, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d6, op=1, ch=False)
# subtract smaller cylinder inside
d6c = cmds.polyCylinder(r=0.3, h=2.9)
cmds.move(0.431, moveX=True, a=True)
cmds.move(-0.692, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d6c, op=2, ch=False)
d7 = cmds.polyCylinder(r=0.4, h=2.8)
cmds.move(-0.384, moveX=True, a=True)
cmds.move(-0.734, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d7, op=1, ch=False)
# subtract smaller cylinder inside
d7c = cmds.polyCylinder(r=0.3, h=2.9)
cmds.move(-0.384, moveX=True, a=True)
cmds.move(-0.734, moveZ=True, a=True)
hubIn = cmds.polyCBoolOp(hubIn, d7c, op=2, ch=False)
# add material
myShader = cmds.shadingNode('lambert', asShader=True, name="blckMat")
cmds.setAttr(nsTmp + ":blckMat.color",
rgb[0],
rgb[1],
rgb[2],
type='double3')
cmds.polyUnite((nsTmp + ":*"), n=nsTmp, ch=False)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move(3.466, moveY=True, a=True)
cmds.delete(ch=True)
cmds.hyperShade(assign=(nsTmp + ":blckMat"))
cmds.namespace(removeNamespace=":" + nsTmp,
mergeNamespaceWithParent=True)
def tyre():
#get values from UI
rgb = cmds.colorSliderGrp('wheelColour', query=True, rgbValue=True)
#set up variables
radius = 2.85
widthHalf = 2.7
ridgeShapeList = []
innerCircle = cmds.polyPipe( h = widthHalf * 0.7, r = 2.65, t = 1.05 )
outerCircle = cmds.polyPipe( h = widthHalf, r = 2.65, t = 0.85 )
ridge1 = cmds.polyPipe( h = (widthHalf * 0.33)/2, r = 2.85, t = 0.80 )
cmds.move( -0.567, moveY = True)
ridge2 = cmds.polyPipe( h = widthHalf * 0.33, r = 2.85, t = 0.80 )
cmds.move( -0.120, moveY = True)
tire = cmds.polyCBoolOp( innerCircle, outerCircle, op = 1 )[0]
tire = cmds.polyCBoolOp( tire, ridge1, op = 1 )[0]
tire = cmds.polyCBoolOp( tire, ridge2, op = 1 )[0]
ridgeShape = cmds.polyCube( w = 0.63, h = 0.2, d = 0.2)
cmds.move( -0.05, moveY = True)
ridgeShapeL = cmds.polyCube( w = 0.2, h = 0.33, d = 0.2, sy = 2)[0]
cmds.select( ridgeShapeL+'.vtx[4]', ridgeShapeL+'.vtx[5]')
cmds.move( -0.09, moveZ = True )
ridgeShapeR = cmds.duplicate( ridgeShapeL )
cmds.move( -((0.63/2) - 0.1), 0.33/2, 0, ridgeShapeL )
cmds.move( (0.63/2) - 0.1, 0.33/2, 0, ridgeShapeR )
ridgeShape = cmds.polyCBoolOp( ridgeShape, ridgeShapeL, op = 1 )[0]
ridgeShape = cmds.polyCBoolOp( ridgeShape, ridgeShapeR, op = 1 )[0]
cmds.move( 0, 0.343, radius - 0.14)
cmds.move( 0, 0, 0, ridgeShape+".scalePivot", ridgeShape+".rotatePivot", absolute=True)
ridgeShapeList.append( ridgeShape )
for i in range( 0, 19):
ridgeShape = cmds.duplicate( ridgeShape )[0]
cmds.rotate( 0, 18, 0, ridgeShape, r = True )
ridgeShapeList.append( ridgeShape )
ridges = cmds.polyUnite( *ridgeShapeList )
cmds.rotate( 9, rotateY = True )
tireL = cmds.polyUnite( tire, ridges )[0]
cmds.rotate( 90, tireL, rotateZ = True )
cmds.move( ((widthHalf / 2)/2), tireL, moveX = True )
tireR = cmds.duplicate( tireL )[0]
cmds.scale( -1, scaleY = True )
cmds.move( -((widthHalf / 2)/2), tireL, moveX = True )
tire = cmds.polyUnite( tireR, tireL )
myShader = cmds.shadingNode( 'phong', asShader=True )
cmds.setAttr( myShader+".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.setAttr( myShader+".reflectivity", 0 )
cmds.select( tire )
cmds.hyperShade( assign = myShader )
cmds.delete( ch = True )
def axel():
axelHeight = 1
axelWidth = 1
axelLength = cmds.intSliderGrp('axelLength', q=True, v=True)
rgb = cmds.colorSliderGrp('blockColour', q=True, rgbValue=True)
axelRadius = 0.48 #0.18 base middle, then extrusions 0.15 each side, slightly smaller than
axelSizeX = axelWidth * 0.8
axelSizeY = axelHeight * 0.32
axelSizeZ = axelLength * 0.8
if(axelLength == 2):
axel = cmds.polyCube(h = 0.18, w=axelSizeZ, d=0.18)
cmds.move((axelRadius/2.0), moveY=True, a=True)
axelName = cmds.ls(axel)[0]
cmds.select(axelName+".f[0]")
cmds.select(axelName+".f[1]", add=True)
cmds.select(axelName+".f[2]", add=True)
cmds.select(axelName+".f[3]", add=True)
cmds.polyExtrudeFacet(lt=(0,0,0.15), kft=False)
cmds.select(axel)
cmds.polyBevel(sg=2, oaf=True, fn=True)
cmds.rotate(90, rotateY=True)
#booleans for grooves
groove1 = cmds.polyPipe(r=0.25, h=0.25,thickness=0.06)
groove2 = cmds.polyPipe(r=0.25, h=0.25,thickness=0.06)
cmds.select(groove1)
cmds.select(groove2,add=True)
cmds.rotate(90,rotateX=True)
cmds.move((axelRadius/2.0), moveY=True)
cmds.select(groove1)
cmds.move(((axelSizeZ/2.0)-0.3), moveZ=True, r=True)
cmds.select(groove2)
cmds.move(((-axelSizeZ/2.0)+0.3), moveZ=True, r=True)
cmds.select(axel)
cmds.select(groove1, add=True)
cmds.select(groove2, add=True)
axel = cmds.polyCBoolOp(op=2, ch=True, n="Axel" + str(rnd.randint(1000,9999)))
if(axelLength > 2):
axel = cmds.polyCube(h = 0.19, w=axelSizeZ, d=0.19, n="Axel" + str(rnd.randint(1000,9999)))
cmds.move((axelSizeY/2.0), moveY=True, a=True)
axelName = cmds.ls(axel)[0]
cmds.select(axelName+".f[0]")
cmds.select(axelName+".f[1]", add=True)
cmds.select(axelName+".f[2]", add=True)
cmds.select(axelName+".f[3]", add=True)
cmds.polyExtrudeFacet(lt=(0,0,0.15), kft=False)
cmds.select(axel)
cmds.polyBevel(sg=2, oaf=True, fn=True)
cmds.rotate(90, rotateY=True)
applyMaterial(axel, rgb)
cmds.delete(ch=True)
def hub(wheelRadius):
hubRadius = wheelRadius - 1
hubWidth = 3 * 0.8
hubThickness = 0
rgb = cmds.colorSliderGrp('hubColor', q=True, rgbValue=True)
outerHub = cmds.polyCylinder(r=hubRadius, h=hubWidth)
cmds.move((wheelRadius), moveY=True, a=True)
cmds.rotate(90, rotateX=True)
innerHubL = cmds.polyCylinder(r=hubRadius-0.3, h=0.6)
cmds.move((wheelRadius), moveY=True, a=True)
cmds.rotate(90, rotateX=True)
cmds.move(1.2,moveZ=True, r=True)
innerHubR = cmds.polyCylinder(r=hubRadius-0.3, h=0.6)
cmds.move((wheelRadius), moveY=True, a=True)
cmds.rotate(90, rotateX=True)
cmds.move(-1.2,moveZ=True, r=True)
cmds.select(outerHub)
cmds.select(innerHubL, add=True)
cmds.select(innerHubR, add=True)
hub = cmds.polyCBoolOp(op=2, ch=False)
cmds.select(clear=True)
pairs = []
holeArray = []
hubHoleArray =[]
#outer, larger radius, slight indent
for i in range(-1,2,2):
hole = cmds.polyCylinder(r=0.3, h=0.2, sz=1)
cmds.rotate(90, rotateX=True)
cmds.move((i*0.8), moveX=True, a=True)
cmds.move(-0.9,moveZ=True)
pairs.append(hole)
hole = cmds.polyCylinder(r=0.3, h=0.2, sz=1)
cmds.rotate(90, rotateX=True)
cmds.move((i*0.8), moveX=True, a=True)
cmds.move(0.9,moveZ=True)
pairs.append(hole)
for pair in pairs:
cmds.select(pair, add=True)
pair1 = cmds.polyUnite(ch=False)
cmds.select(pair1)
pair2 = cmds.duplicate()
cmds.rotate(60,rotateZ=True)
cmds.select(pair1)
pair3 = cmds.duplicate()
cmds.rotate(120,rotateZ=True)
cmds.select(pair1)
cmds.select(pair2,add=True)
cmds.select(pair3,add=True)
hubIndents = cmds.polyUnite(ch=False)
cmds.move(wheelRadius, moveY=True)
cmds.select(hub)
cmds.select(hubIndents, add=True)
indentedHub = cmds.polyCBoolOp(op=2)
holePairs = []
for i in range(-1,2,2):
hole = cmds.polyCylinder(r=0.25, h=3, sz=1)
cmds.rotate(90, rotateX=True)
cmds.move(0,moveZ=True)
cmds.move((i*0.8), moveX=True, a=True)
holePairs.append(hole)
cmds.select(clear=True)
for pair in holePairs:
cmds.select(pair, add=True)
holePair1 = cmds.polyUnite(ch=False)
cmds.select(holePair1)
holePair2 = cmds.duplicate()
cmds.rotate(60,rotateZ=True)
cmds.select(holePair1)
holePair3 = cmds.duplicate()
cmds.rotate(120,rotateZ=True)
cmds.select(holePair1)
cmds.select(holePair2,add=True)
cmds.select(holePair3,add=True)
hubIndents = cmds.polyUnite(ch=False)
cmds.move(wheelRadius, moveY=True)
cmds.select(indentedHub)
cmds.select(hubIndents, add=True)
holedHub = cmds.polyCBoolOp(op=2)
cyl = cmds.polyCylinder(r=0.3, h=2.2)
cmds.move(0,moveZ=True)
cmds.move((wheelRadius), moveY=True, a=True)
cmds.rotate(90,rotateX=True)
cmds.select(cyl)
cmds.select(holedHub, add=True)
hub = cmds.polyCBoolOp(op=1)
axelHole = cmds.polyCube(h = 0.19, w=2.5, d=0.19)
cmds.move(wheelRadius, moveY=True, a=True)
holeName = cmds.ls(axelHole)[0]
cmds.select(holeName+".f[0]")
cmds.select(holeName+".f[1]", add=True)
cmds.select(holeName+".f[2]", add=True)
cmds.select(holeName+".f[3]", add=True)
cmds.polyExtrudeFacet(lt=(0,0,0.15), kft=False)
cmds.select(axelHole)
cmds.polyBevel(sg=2, oaf=True, fn=True)
cmds.rotate(90, rotateY=True)
cmds.select(hub)
cmds.select(axelHole,add=True)
finalHub = cmds.polyCBoolOp(op=2, n="Hub" + str(rnd.randint(1000,9999)))
applyMaterial(finalHub, rgb)
cmds.delete(ch=True)
def roundedBlockWithHolesAngle():
# set up block dimensions
height = 3
width = 1 #bump
bendAngle = cmds.radioButtonGrp('roundedBlockWithHolesBendAngle',
q=True,
sl=True)
if (bendAngle == 1):
length = cmds.intSliderGrp('roundedBlockWithHolesAngleLength',
q=True,
v=True)
bendLength = cmds.intSliderGrp('roundedBlockWithHolesAngleBendLength',
q=True,
v=True)
if (bendAngle == 2):
length = 4
bendLength = 3
rgb = cmds.colorSliderGrp('roundedBlockWithHolesAngleColour',
q=True,
rgbValue=True)
# name
nsTmp = "RoundedBlockWithHolesAngle" + str(rnd.randint(1000, 9999))
cmds.select(clear=True)
cmds.namespace(add=nsTmp)
cmds.namespace(set=nsTmp)
# define cubes size
cubeSizeX = width * 0.8
cubeSizeZ = length * 0.8
cubeSizeY = height * 0.32
bendSizeZ = bendLength * 0.8
# create a cube
cube = cmds.polyCube(h=cubeSizeY, w=cubeSizeX, d=cubeSizeZ)
# move it up
cmds.move((cubeSizeY / 2.0), moveY=True)
# create holes
for i in range(width):
for j in range(length):
# create cylinder in the place of a hole
hole = cmds.polyCylinder(r=0.25, h=height / 2.0)
# rotate and position it
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((i * 0.8) - (cubeSizeX / 2.0) + 0.4),
moveX=True,
a=True)
cmds.move(((j * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
# remove it from the base block
cube = cmds.polyCBoolOp(cube, hole, op=2, caching=False, ch=False)
# add cylinders to round corners
# right side
rCylind = cmds.polyCylinder(r=cubeSizeY * 0.5, h=cubeSizeX)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeX / 2.0 + 0.079), moveY=True, a=True)
cmds.move((-cubeSizeZ * 0.5), moveZ=True, a=True)
# merge right cylinder with cube
cube = cmds.polyCBoolOp(cube, rCylind, op=1, caching=False, ch=False)
# add a hole
rHole = cmds.polyCylinder(r=0.25, h=height / 2.0)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((0 * 0.8) - (cubeSizeX / 2.0) + 0.4), moveX=True, a=True)
cmds.move(((0 * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
cube = cmds.polyCBoolOp(cube, rHole, op=2, caching=False, ch=False)
# left side
lCylind = cmds.polyCylinder(r=cubeSizeY * 0.5, h=cubeSizeX)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeX / 2.0 + 0.079), moveY=True, a=True)
cmds.move((cubeSizeZ * 0.5), moveZ=True, a=True)
# merge left cylinder with cube
cube = cmds.polyCBoolOp(cube, lCylind, op=1, caching=False, ch=False)
# create a hole
lHole = cmds.polyCylinder(r=0.25, h=height / 2.0)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((width * 0.8) - cubeSizeX), moveX=True, a=True)
cmds.move(((length * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
cube = cmds.polyCBoolOp(cube, lHole, op=2, caching=False, ch=False)
# create a second cube for bend
if (bendAngle == 1): # at 90 degrees
cubeBend = cmds.polyCube(h=cubeSizeY, w=cubeSizeX, d=bendSizeZ)
cmds.rotate(90, rotateX=True, a=True)
# move it up
cmds.move((bendSizeZ / 2.0), moveY=True)
# add cylinder to its end
endCylind = cmds.polyCylinder(r=cubeSizeY * 0.5, h=cubeSizeX)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((bendSizeZ), moveY=True, a=True)
# merge cube with cylinder
cubeBend = cmds.polyCBoolOp(cubeBend,
endCylind,
op=1,
caching=False,
ch=False)
# move bended cube to cube's end
cmds.move((-cubeSizeZ / 2), moveZ=True, a=True)
# move it up a bit
cmds.move(0.5, moveY=True)
# add holes to bended part
# create holes
for i in range(width):
for j in range(bendLength):
# create cylinder in the place of a hole
bHole = cmds.polyCylinder(r=0.25, h=height / 2.0)
# rotate and position it
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((0 * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
cmds.move(((0 * 0.8) - (cubeSizeX / 2.0) + 0.4),
moveX=True,
a=True)
cmds.move(((j * 0.8) + (cubeSizeY / 2.0)), moveY=True, a=True)
# remove it from the base block
cubeBend = cmds.polyCBoolOp(cubeBend,
bHole,
op=2,
caching=False,
ch=False)
# create the last hole
endHole = cmds.polyCylinder(r=0.25, h=height / 2.0)
# rotate and position it
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((0 * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
cmds.move((((bendLength) * 0.8) + (cubeSizeY / 2.0)),
moveY=True,
a=True)
# remove it from end cylinder
cubeBend = cmds.polyCBoolOp(cubeBend,
endHole,
op=2,
caching=False,
ch=False)
if (bendAngle == 2): # bend at 60 degrees
# create a cube for bend
cubeBend = cmds.polyCube(h=cubeSizeY, w=cubeSizeX, d=bendSizeZ)
# move & rotate
cmds.move((cubeSizeY), moveY=True)
cmds.rotate(60, rotateX=True, a=True)
cmds.move((0 - (cubeSizeZ / 2.0) + 1.04), moveZ=True, a=True)
# add cylinder to its end
endCylind = cmds.polyCylinder(r=cubeSizeY * 0.5 + 0.01, h=cubeSizeX)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((bendSizeZ - 0.4), moveY=True, a=True)
cmds.move((-bendSizeZ / 2 + 0.04), moveZ=True, a=True)
# merge cube with cylinder
cubeBend = cmds.polyCBoolOp(cubeBend,
endCylind,
op=1,
caching=False,
ch=False)
# move bended cube to cube's end
cmds.move((-cubeSizeZ / 2), moveZ=True, a=True)
# move it up a bit
cmds.move(0.5, moveY=True)
# add holes to bended part
# create holes
# HOLE ONE (from bottom)
hole1 = cmds.polyCylinder(r=0.25, h=height / 2.0)
# rotate and position it
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move(cubeSizeY / 2, moveY=True, a=True)
cmds.move(-cubeSizeZ / 2.0, moveZ=True, a=True)
cmds.move(((0 * 0.8) - (cubeSizeX * 0.5) + 0.4), moveX=True, a=True)
# remove it from the base block
cubeBend = cmds.polyCBoolOp(cubeBend,
hole1,
op=2,
caching=False,
ch=False)
# HOLE TWO
hole2 = cmds.polyCylinder(r=0.25, h=height / 2.0)
# rotate and position it
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move(1.129, moveY=True, a=True)
cmds.move(-1.994, moveZ=True, a=True)
# remove it from the base block
cubeBend = cmds.polyCBoolOp(cubeBend,
hole2,
op=2,
caching=False,
ch=False)
# HOLE THREE
hole3 = cmds.polyCylinder(r=0.25, h=height / 2.0)
# rotate and position it
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move(1.834, moveY=True, a=True)
cmds.move(-2.363, moveZ=True, a=True)
# remove it from the base block
cubeBend = cmds.polyCBoolOp(cubeBend,
hole3,
op=2,
caching=False,
ch=False)
# HOLE FOUR
endHole = cmds.polyCylinder(r=0.25, h=height / 2.0)
# rotate and position it
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move(-2.741, moveZ=True, a=True)
cmds.move(2.49, moveY=True, a=True)
# remove it from end cylinder
cubeBend = cmds.polyCBoolOp(cubeBend,
endHole,
op=2,
caching=False,
ch=False)
# add material
myShader = cmds.shadingNode('lambert', asShader=True, name="blckMat")
cmds.setAttr(nsTmp + ":blckMat.color",
rgb[0],
rgb[1],
rgb[2],
type='double3')
cmds.polyUnite((nsTmp + ":*"), n=nsTmp, ch=False)
cmds.delete(ch=True)
cmds.hyperShade(assign=(nsTmp + ":blckMat"))
cmds.namespace(removeNamespace=":" + nsTmp, mergeNamespaceWithParent=True)
def createHoles(block, blockDepth, blockSizeX, blockSizeY, blockSizeZ, axelHoles, holeOffset, holeOffsetZ):
beam = block
#Holes are offset on reg blocks (in between bumps)
if(holeOffset == True):
holeArray = []
for i in range(blockDepth-1):
#outer, larger radius, slight indent
hole = cmds.polyCylinder(r=0.3, h=0.1, sz=1)
cmds.rotate(90, rotateX=True)
cmds.rotate(90, rotateY=True)
cmds.move(((blockSizeY/2.0) + 0.1), moveY=True, a=True)
cmds.move(((i * 0.8) - (blockSizeZ/2.0)+ holeOffsetZ), moveZ=True, a=True)
cmds.move((blockSizeX/2.0), moveX = True, a = True)
holeArray.append(hole)
#same as above, other side of block
hole = cmds.polyCylinder(r=0.3, h=0.1, sz=1)
cmds.rotate(90, rotateX=True)
cmds.rotate(90, rotateY=True)
cmds.move(((blockSizeY/2.0) +0.1), moveY=True, a=True)
cmds.move(((i * 0.8) - (blockSizeZ/2.0)+ holeOffsetZ), moveZ=True, a=True)
cmds.move((-1*(blockSizeX/2.0)), moveX = True, a = True)
holeArray.append(hole)
#smaller radius, full way through block
hole = cmds.polyCylinder(r=0.25, h=blockSizeX, sz=1)
cmds.rotate(90, rotateX=True)
cmds.rotate(90, rotateY=True)
cmds.move(((blockSizeY/2.0) + 0.1), moveY=True, a=True)
cmds.move(((i * 0.8) - (blockSizeZ/2.0) + holeOffsetZ), moveZ=True, a=True)
holeArray.append(hole)
cmds.select(beam)
for hole in holeArray:
cmds.select(hole, add=True)
finalBlock = cmds.polyCBoolOp(op=2)
#Holes on rounded beams are not offset, are flush with rounded ends
else:
#if no axel holes
if(axelHoles == 0):
start = 0
end = 1
if(axelHoles ==1):
start = 1
end = 1
if(axelHoles ==2):
start = 1
end = 0
holeArray = []
for i in range(start, blockDepth+end):
#outer, larger radius, slight indent
hole = cmds.polyCylinder(r=0.3, h=0.1, sz=1)
cmds.rotate(90, rotateX=True)
cmds.rotate(90, rotateY=True)
cmds.move((blockSizeY/2.0), moveY=True, a=True)
cmds.move(((i * 0.8) - (blockSizeZ/2.0)+ holeOffsetZ), moveZ=True, a=True)
cmds.move((blockSizeX/2.0), moveX = True, a = True)
holeArray.append(hole)
#same as above, other side of block
hole = cmds.polyCylinder(r=0.3, h=0.1, sz=1)
cmds.rotate(90, rotateX=True)
cmds.rotate(90, rotateY=True)
cmds.move((blockSizeY/2.0), moveY=True, a=True)
cmds.move(((i * 0.8) - (blockSizeZ/2.0)+ holeOffsetZ), moveZ=True, a=True)
cmds.move((-1*(blockSizeX/2.0)), moveX = True, a = True)
holeArray.append(hole)
#smaller radius, full way through block
hole = cmds.polyCylinder(r=0.25, h=blockSizeX, sz=1)
cmds.rotate(90, rotateX=True)
cmds.rotate(90, rotateY=True)
cmds.move((blockSizeY/2.0), moveY=True, a=True)
cmds.move(((i * 0.8) - (blockSizeZ/2.0)+ holeOffsetZ), moveZ=True, a=True)
holeArray.append(hole)
if(axelHoles == 1):
cmds.select(clear=True)
#each part of axel shape - 0.19
#each oart comes out 0.15
#total axle diameter = 0.48, axle hole diam = 0.49
hole = cmds.polyCube(h = 0.19, w=2, d=0.19)
cmds.move((blockSizeY/2.0), moveY=True, a=True)
cmds.move((((-blockSizeZ)/2.0)+ holeOffsetZ), moveZ=True, a=True)
holeName = cmds.ls(hole)[0]
cmds.select(holeName+".f[0]")
cmds.select(holeName+".f[1]", add=True)
cmds.select(holeName+".f[2]", add=True)
cmds.select(holeName+".f[3]", add=True)
cmds.polyExtrudeFacet(lt=(0,0,0.15), kft=False)
cmds.select(hole)
cmds.polyBevel(sg=2, oaf=True, fn=True)
holeArray.append(hole)
if(axelHoles == 2):
cmds.select(clear=True)
hole = cmds.polyCube(h = 0.19, w=2, d=0.19)
cmds.move((blockSizeY/2.0), moveY=True, a=True)
cmds.move((((-blockSizeZ)/2.0)+ holeOffsetZ), moveZ=True, a=True)
holeName = cmds.ls(hole)[0]
cmds.select(holeName+".f[0]")
cmds.select(holeName+".f[1]", add=True)
cmds.select(holeName+".f[2]", add=True)
cmds.select(holeName+".f[3]", add=True)
cmds.polyExtrudeFacet(lt=(0,0,0.15), kft=False)
cmds.select(hole)
cmds.polyBevel(sg=2, oaf=True, fn=True)
holeArray.append(hole)
cmds.select(clear=True)
hole = cmds.polyCube(h = 0.19, w=2, d=0.19)
cmds.move((blockSizeY/2.0), moveY=True, a=True)
cmds.move((((blockSizeZ)/2.0)- holeOffsetZ), moveZ=True, a=True)
holeName = cmds.ls(hole)[0]
cmds.select(holeName+".f[0]")
cmds.select(holeName+".f[1]", add=True)
cmds.select(holeName+".f[2]", add=True)
cmds.select(holeName+".f[3]", add=True)
cmds.polyExtrudeFacet(lt=(0,0,0.15), kft=False)
cmds.select(hole)
cmds.polyBevel(sg=2, oaf=True, fn=True)
holeArray.append(hole)
cmds.select(beam)
for hole in holeArray:
cmds.select(hole, add=True)
#punch holes through rounded block
finalBlock = cmds.polyCBoolOp(op=2, ch=False, n="Block" + str(rnd.randint(1000,9999)))
return finalBlock
def brick():
#get values from UI
brickLength = cmds.intSliderGrp( 'brickLength', query = True, value = True)
brickWidth = cmds.intSliderGrp( 'brickWidth', query = True, value = True)
brickHeight = cmds.intSliderGrp('brickHeight', query = True, value = True)
flatBrick = cmds.checkBox('flatBrickCheck', query = True, value = True)
brickStuds = cmds.radioButtonGrp( 'brickStudOptions', query = True, select = True)
brickHoles = cmds.radioButtonGrp( 'brickHoleOptions', query = True, select = True)
rgb = cmds.colorSliderGrp('brickColour', query=True, rgbValue=True)
transparent = cmds.checkBox('makeTransparent', query = True, value = True)
#set up variables
brickList = []
studList = []
if brickHoles == 1:
holeOffset = 0.8
holeNum = brickWidth - 1
else:
holeOffset = 0.4
holeNum = brickWidth
brickSizeX = brickWidth * 0.8
brickSizeZ = brickLength * 0.8
if( flatBrick == True ):
brickSizeY = 0.32
elif( flatBrick == False ):
brickSizeY = 0.96
#create brick
for h in range ( brickHeight ):
brick = cmds.polyCube( h = brickSizeY, w = brickSizeX, d = brickSizeZ )
cmds.move( ( brickSizeY / 2 ), brick, moveY = True )
if( brickHoles == 1 or brickHoles == 2 ):
brick = createBlockHoles( brickSizeX, brickSizeY, brick, holeNum, holeOffset )
cmds.makeIdentity(apply=True, t=1, r=1, s=1, n=0)
cmds.move( ( brickSizeY * h ), brick, moveY = True, a = True )
brickList.append( brick )
if( len( brickList ) > 1 ):
brick = cmds.polyUnite( *brickList )
else:
brick = brickList[0]
if( brickStuds == 1 or brickStuds == 2 ):
for l in range ( brickLength ):
for w in range( brickWidth ):
stud = cmds.polyCylinder( h = 0.18, r = 0.24 )
if( brickStuds == 1 ):
studCut = cmds.polyCylinder( h = 0.18, r = 0.15 )
stud = cmds.polyCBoolOp( stud, studCut, op = 2 )
cmds.move(((w * 0.8) - (brickSizeX/2.0) + 0.4 ), moveX = True, a = True)
cmds.move((brickSizeY * brickHeight) + (0.18/2), moveY = True, a = True)
cmds.move(((l * 0.8) - (brickSizeZ/2.0) + 0.4), moveZ = True, a = True)
studList.append( stud )
studs = cmds.polyUnite( *studList )
brick = cmds.polyUnite( studs, brick )
myShader = cmds.shadingNode( 'phong', asShader=True )
cmds.setAttr( myShader+".color", rgb[0], rgb[1], rgb[2], type='double3')
cmds.setAttr( myShader+".reflectivity", 0 )
if( transparent == True ):
cmds.setAttr( myShader+".transparency", 0.5, 0.5, 0.5, type = 'double3' )
cmds.select( brick )
cmds.hyperShade( assign = myShader )
cmds.delete( ch = True )
def defaultBooleanPush(*args):
cmds.polyCBoolOp(op=1, n='result')
print 'boolean action'
def roundedBlockWithHoles():
# set up block dimensions
height = 3
width = 1 #bump
length = cmds.intSliderGrp('roundedBlockWithHolesLength', q=True, v=True)
rgb = cmds.colorSliderGrp('roundedBlockWithHolesColour',
q=True,
rgbValue=True)
# name
nsTmp = "RoundedBlockWithHoles" + str(rnd.randint(1000, 9999))
cmds.select(clear=True)
cmds.namespace(add=nsTmp)
cmds.namespace(set=nsTmp)
# define cube's size
cubeSizeX = width * 0.8
cubeSizeZ = length * 0.8
cubeSizeY = height * 0.32
# create a cube
cube = cmds.polyCube(h=cubeSizeY, w=cubeSizeX, d=cubeSizeZ)
# move it up
cmds.move((cubeSizeY / 2.0), moveY=True)
# create holes
for i in range(width):
for j in range(length):
# create cylinder in the place of a hole
hole = cmds.polyCylinder(r=0.25, h=height / 2.0)
# rotate and position it
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((i * 0.8) - (cubeSizeX / 2.0) + 0.4),
moveX=True,
a=True)
cmds.move(((j * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
# remove it from the base block
cube = cmds.polyCBoolOp(cube, hole, op=2, caching=False, ch=False)
# add cylinders to round corners
# right side
rCylind = cmds.polyCylinder(r=cubeSizeY * 0.5, h=cubeSizeX)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeX / 2.0 + 0.079), moveY=True, a=True)
cmds.move((-cubeSizeZ * 0.5), moveZ=True, a=True)
# create a hole in it
rHole = cmds.polyCylinder(r=0.25, h=height / 2.0)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((0 * 0.8) - (cubeSizeX / 2.0) + 0.4), moveX=True, a=True)
cmds.move(((0 * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
rCylind = cmds.polyCBoolOp(rCylind, rHole, op=2, caching=False, ch=False)
# left side
lCylind = cmds.polyCylinder(r=cubeSizeY * 0.5, h=cubeSizeX)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeX / 2.0 + 0.079), moveY=True, a=True)
cmds.move((cubeSizeZ * 0.5), moveZ=True, a=True)
# create a hole in it
lHole = cmds.polyCylinder(r=0.25, h=height / 2.0)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((width * 0.8) - cubeSizeX), moveX=True, a=True)
cmds.move(((length * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
lCylind = cmds.polyCBoolOp(lCylind, lHole, op=2, caching=False, ch=False)
# subtract a cylinder from left side of the cube
lCubeHole = cmds.polyCylinder(r=0.25, h=height / 2.0)
cmds.rotate(90, rotateX=True, a=True)
cmds.rotate(90, rotateY=True, a=True)
cmds.move((cubeSizeY / 2.0), moveY=True, a=True)
cmds.move(((width * 0.8) - cubeSizeX), moveX=True, a=True)
cmds.move(((length * 0.8) - (cubeSizeZ / 2.0)), moveZ=True, a=True)
cube = cmds.polyCBoolOp(cube, lCubeHole, op=2, caching=False, ch=False)
# add material
myShader = cmds.shadingNode('lambert', asShader=True, name="blckMat")
cmds.setAttr(nsTmp + ":blckMat.color",
rgb[0],
rgb[1],
rgb[2],
type='double3')
cmds.polyUnite((nsTmp + ":*"), n=nsTmp, ch=False)
cmds.delete(ch=True)
cmds.hyperShade(assign=(nsTmp + ":blckMat"))
cmds.namespace(removeNamespace=":" + nsTmp, mergeNamespaceWithParent=True)
