def test_get_test_pins(self):
yotta_config = YottaConfig()
yotta_config.set_yotta_config(self.YOTTA_CONFIG_LONG)
self.assertEqual(yotta_config.get_baudrate(), 9600)
self.assertIn('spi', yotta_config.get_test_pins())
self.assertIn('i2c', yotta_config.get_test_pins())
self.assertIn('serial', yotta_config.get_test_pins())
def test_get_test_pins(self):
yotta_config = YottaConfig()
yotta_config.set_yotta_config(self.YOTTA_CONFIG_LONG)
self.assertEqual(yotta_config.get_baudrate(), 9600)
self.assertIn('spi', yotta_config.get_test_pins())
self.assertIn('i2c', yotta_config.get_test_pins())
self.assertIn('serial', yotta_config.get_test_pins())
def main_cli(opts, args, gt_instance_uuid=None):
"""! This is main CLI function with all command line parameters
@details This function also implements CLI workflow depending on CLI parameters inputed
@return This function doesn't return, it exits to environment with proper success code
"""
if not MBED_LMTOOLS:
gt_logger.gt_log_err("error: mbed-ls proprietary module not installed")
return (-1)
if not MBED_HOST_TESTS:
gt_logger.gt_log_err(
"error: mbed-host-tests proprietary module not installed")
return (-1)
# This is how you magically control colours in this piece of art software
gt_logger.colorful(not opts.plain)
# List available test binaries (names, no extension)
if opts.list_binaries:
list_binaries_for_targets()
return (0)
# Prints version and exits
if opts.version:
print_version()
return (0)
# We will load hooks from JSON file to support extra behaviour during test execution
greentea_hooks = GreenteaHooks(
opts.hooks_json) if opts.hooks_json else None
# Capture alternative test console inputs, used e.g. in 'yotta test command'
if opts.digest_source:
enum_host_tests_path = get_local_host_tests_dir(opts.enum_host_tests)
host_test_result = run_host_test(
None,
None,
None,
None,
None,
hooks=greentea_hooks,
digest_source=opts.digest_source,
enum_host_tests_path=enum_host_tests_path,
verbose=opts.verbose_test_result_only)
single_test_result, single_test_output, single_testduration, single_timeout, result_test_cases, test_cases_summary = host_test_result
status = TEST_RESULTS.index(
single_test_result) if single_test_result in TEST_RESULTS else -1
return (status)
### Read yotta module basic information
yotta_module = YottaModule()
yotta_module.init() # Read actual yotta module data
# Check if NO greentea-client is in module.json of repo to test, if so abort
if not yotta_module.check_greentea_client():
gt_logger.gt_log("""
*****************************************************************************************
* We've noticed that NO 'greentea-client' module is specified in *
* dependency/testDependency section of this module's 'module.json' file. *
* *
* This version of Greentea requires 'greentea-client' module. *
* Please downgrade to Greentea before v0.2.0: *
* *
* $ pip install "mbed-greentea<0.2.0" --upgrade *
* *
* or port your tests to new Async model: https://github.com/ARMmbed/greentea/pull/78 *
*****************************************************************************************
""")
return (0)
### Selecting yotta targets to process
yt_targets = [
] # List of yotta targets specified by user used to process during this run
if opts.list_of_targets:
yt_targets = opts.list_of_targets.split(',')
else:
# Trying to use locally set yotta target
gt_logger.gt_log("checking for yotta target in current directory")
gt_logger.gt_log_tab("reason: no --target switch set")
current_target = get_mbed_target_from_current_dir()
if current_target:
gt_logger.gt_log("assuming default target as '%s'" %
gt_logger.gt_bright(current_target))
# Assuming first target printed by 'yotta search' will be used
yt_targets = [current_target]
else:
gt_logger.gt_log_tab(
"yotta target in current directory is not set")
gt_logger.gt_log_err(
"yotta target is not specified. Use '%s' or '%s' command to set target"
% (gt_logger.gt_bright('mbedgt -t <yotta_target>'),
gt_logger.gt_bright('yotta target <yotta_target>')))
return (-1)
### Query with mbedls for available mbed-enabled devices
gt_logger.gt_log("detecting connected mbed-enabled devices...")
# Detect devices connected to system
mbeds = mbed_lstools.create()
mbeds_list = mbeds.list_mbeds_ext()
ready_mbed_devices = [] # Devices which can be used (are fully detected)
if mbeds_list:
gt_logger.gt_log(
"detected %d device%s" %
(len(mbeds_list), 's' if len(mbeds_list) != 1 else ''))
for mut in mbeds_list:
if not all(mut.values()):
gt_logger.gt_log_err(
"can't detect all properties of the device!")
for prop in mut:
if not mut[prop]:
gt_logger.gt_log_tab("property '%s' is '%s'" %
(prop, str(mut[prop])))
else:
ready_mbed_devices.append(mut)
gt_logger.gt_log_tab(
"detected '%s' -> '%s', console at '%s', mounted at '%s', target id '%s'"
% (gt_logger.gt_bright(mut['platform_name']),
gt_logger.gt_bright(mut['platform_name_unique']),
gt_logger.gt_bright(mut['serial_port']),
gt_logger.gt_bright(mut['mount_point']),
gt_logger.gt_bright(mut['target_id'])))
else:
gt_logger.gt_log_err("no devices detected")
return (RET_NO_DEVICES)
### Use yotta to search mapping between platform names and available platforms
# Convert platform:target, ... mapping to data structure
map_platform_to_yt_target = {}
if opts.map_platform_to_yt_target:
gt_logger.gt_log(
"user defined platform -> target supported mapping definition (specified with --map-target switch)"
)
p_to_t_mappings = opts.map_platform_to_yt_target.split(',')
for mapping in p_to_t_mappings:
if len(mapping.split(':')) == 2:
platform, yt_target = mapping.split(':')
if platform not in map_platform_to_yt_target:
map_platform_to_yt_target[platform] = []
map_platform_to_yt_target[platform].append(yt_target)
gt_logger.gt_log_tab(
"mapped platform '%s' to be compatible with '%s'" %
(gt_logger.gt_bright(platform),
gt_logger.gt_bright(yt_target)))
else:
gt_logger.gt_log_tab(
"unknown format '%s', use 'platform:target' format" %
mapping)
# Check if mbed classic target name can be translated to yotta target name
mut_info_map = {
} # platform_name : mut_info_dict, extract yt_targets with e.g. [k["yotta_target"] for k in d['K64F']["yotta_targets"]]
for mut in ready_mbed_devices:
platfrom_name = mut['platform_name']
if platfrom_name not in mut_info_map:
mut_info = get_mbed_clasic_target_info(
platfrom_name,
map_platform_to_yt_target,
use_yotta_registry=opts.yotta_search_for_mbed_target)
if mut_info:
mut_info_map[platfrom_name] = mut_info
### List of unique ready platform names
unique_mbed_devices = list(set(mut_info_map.keys()))
### Identify which targets has to be build because platforms are present
yt_target_platform_map = {} # yt_target_to_test : platforms to test on
for yt_target in yt_targets:
for platform_name in unique_mbed_devices:
if yt_target in [
k["yotta_target"]
for k in mut_info_map[platform_name]["yotta_targets"]
]:
if yt_target not in yt_target_platform_map:
yt_target_platform_map[yt_target] = []
if platform_name not in yt_target_platform_map[yt_target]:
yt_target_platform_map[yt_target].append(platform_name)
### We can filter in only specific target ids
accepted_target_ids = None
if opts.use_target_ids:
gt_logger.gt_log(
"filtering out target ids not on below list (specified with --use-tids switch)"
)
accepted_target_ids = opts.use_target_ids.split(',')
for tid in accepted_target_ids:
gt_logger.gt_log_tab("accepting target id '%s'" %
gt_logger.gt_bright(tid))
test_exec_retcode = 0 # Decrement this value each time test case result is not 'OK'
test_platforms_match = 0 # Count how many tests were actually ran with current settings
target_platforms_match = 0 # Count how many platforms were actually tested with current settings
test_report = {} # Test report used to export to Junit, HTML etc...
muts_to_test = [] # MUTs to actually be tested
test_queue = Queue(
) # contains information about test_bin and image_path for each test case
test_result_queue = Queue() # used to store results of each thread
execute_threads = [] # list of threads to run test cases
### check if argument of --parallel mode is a integer and greater or equal 1
try:
parallel_test_exec = int(opts.parallel_test_exec)
if parallel_test_exec < 1:
parallel_test_exec = 1
except ValueError:
gt_logger.gt_log_err(
"argument of mode --parallel is not a int, disable parallel mode")
parallel_test_exec = 1
# Values used to generate random seed for test execution order shuffle
SHUFFLE_SEED_ROUND = 10 # Value used to round float random seed
shuffle_random_seed = round(random.random(), SHUFFLE_SEED_ROUND)
# Set shuffle seed if it is provided with command line option
if opts.shuffle_test_seed:
shuffle_random_seed = round(float(opts.shuffle_test_seed),
SHUFFLE_SEED_ROUND)
### Testing procedures, for each target, for each target's compatible platform
for yotta_target_name in yt_target_platform_map:
gt_logger.gt_log(
"processing '%s' yotta target compatible platforms..." %
gt_logger.gt_bright(yotta_target_name))
for platform_name in yt_target_platform_map[yotta_target_name]:
gt_logger.gt_log("processing '%s' platform..." %
gt_logger.gt_bright(platform_name))
### Select MUTS to test from list of available MUTS to start testing
mut = None
number_of_parallel_instances = 1
for mbed_dev in ready_mbed_devices:
if accepted_target_ids and mbed_dev[
'target_id'] not in accepted_target_ids:
continue
if mbed_dev['platform_name'] == platform_name:
mut = mbed_dev
muts_to_test.append(mbed_dev)
gt_logger.gt_log("using platform '%s' for test:" %
gt_logger.gt_bright(platform_name))
for k in mbed_dev:
gt_logger.gt_log_tab("%s = '%s'" % (k, mbed_dev[k]))
if number_of_parallel_instances < parallel_test_exec:
number_of_parallel_instances += 1
else:
break
# Configuration print mode:
if opts.verbose_test_configuration_only:
continue
if mut:
target_platforms_match += 1
# Demo mode: --run implementation (already added --run to mbedhtrun)
# We want to pass file name to mbedhtrun (--run NAME => -f NAME_ and run only one binary
if opts.run_app:
gt_logger.gt_log("running '%s' for '%s'" %
(gt_logger.gt_bright(opts.run_app),
gt_logger.gt_bright(yotta_target_name)))
disk = mut['mount_point']
port = mut['serial_port']
micro = mut['platform_name']
program_cycle_s = mut_info_map[platfrom_name][
'properties']['program_cycle_s']
copy_method = opts.copy_method if opts.copy_method else 'shell'
enum_host_tests_path = get_local_host_tests_dir(
opts.enum_host_tests)
yotta_config = YottaConfig()
yotta_config.init(yotta_target_name)
yotta_config_baudrate = yotta_config.get_baudrate()
# We will force configuration specific baudrate
if port:
port = "%s:%d" % (port, yotta_config_baudrate)
test_platforms_match += 1
host_test_result = run_host_test(
opts.run_app,
disk,
port,
yotta_target_name,
mut['target_id'],
micro=micro,
copy_method=copy_method,
program_cycle_s=program_cycle_s,
digest_source=opts.digest_source,
json_test_cfg=opts.json_test_configuration,
run_app=opts.run_app,
enum_host_tests_path=enum_host_tests_path,
verbose=True)
single_test_result, single_test_output, single_testduration, single_timeout, result_test_cases, test_cases_summary = host_test_result
status = TEST_RESULTS.index(
single_test_result
) if single_test_result in TEST_RESULTS else -1
if single_test_result != TEST_RESULT_OK:
test_exec_retcode += 1
continue
# Regression test mode:
# Building sources for given target and perform normal testing
yotta_result, yotta_ret = True, 0 # Skip build and assume 'yotta build' was successful
if opts.skip_yotta_build:
gt_logger.gt_log(
"skipping calling yotta (specified with --skip-build option)"
)
else:
yotta_result, yotta_ret = build_with_yotta(
yotta_target_name,
verbose=opts.verbose,
build_to_release=opts.build_to_release,
build_to_debug=opts.build_to_debug)
# We need to stop executing if yotta build fails
if not yotta_result:
gt_logger.gt_log_err("yotta returned %d" % yotta_ret)
return (RET_YOTTA_BUILD_FAIL)
if opts.only_build_tests:
continue
# Build phase will be followed by test execution for each target
if yotta_result and not opts.only_build_tests:
binary_type = mut_info_map[platform_name]['properties'][
'binary_type']
ctest_test_list = load_ctest_testsuite(
os.path.join('.', 'build', yotta_target_name),
binary_type=binary_type)
#TODO no tests to execute
filtered_ctest_test_list = create_filtered_test_list(
ctest_test_list, opts.test_by_names, opts.skip_test)
gt_logger.gt_log(
"running %d test%s for target '%s' and platform '%s'" %
(len(filtered_ctest_test_list),
"s" if len(filtered_ctest_test_list) != 1 else "",
gt_logger.gt_bright(yotta_target_name),
gt_logger.gt_bright(platform_name)))
# Test execution order can be shuffled (also with provided random seed)
# for test execution reproduction.
filtered_ctest_test_list_keys = filtered_ctest_test_list.keys()
if opts.shuffle_test_order:
# We want to shuffle test names randomly
random.shuffle(filtered_ctest_test_list_keys,
lambda: shuffle_random_seed)
for test_bin in filtered_ctest_test_list_keys:
image_path = filtered_ctest_test_list[test_bin]
test = {"test_bin": test_bin, "image_path": image_path}
test_queue.put(test)
#for test_bin, image_path in filtered_ctest_test_list.iteritems():
# test = {"test_bin":test_bin, "image_path":image_path}
# test_queue.put(test)
number_of_threads = 0
for mut in muts_to_test:
#################################################################
# Experimental, parallel test execution
#################################################################
if number_of_threads < parallel_test_exec:
args = (test_result_queue, test_queue, opts, mut,
mut_info, yotta_target_name, greentea_hooks)
t = Thread(target=run_test_thread, args=args)
execute_threads.append(t)
number_of_threads += 1
gt_logger.gt_log_tab(
"use %s instance%s for testing" %
(len(execute_threads), 's' if len(execute_threads) != 1 else ''))
for t in execute_threads:
t.daemon = True
t.start()
# merge partial test reports from diffrent threads to final test report
for t in execute_threads:
try:
t.join() #blocking
test_return_data = test_result_queue.get(False)
except Exception as e:
# No test report generated
gt_logger.gt_log_err("could not generate test report" + str(e))
test_exec_retcode += -1000
return test_exec_retcode
test_platforms_match += test_return_data['test_platforms_match']
test_exec_retcode += test_return_data['test_exec_retcode']
partial_test_report = test_return_data['test_report']
# todo: find better solution, maybe use extend
for report_key in partial_test_report.keys():
if report_key not in test_report:
test_report[report_key] = {}
test_report.update(partial_test_report)
else:
test_report[report_key].update(partial_test_report[report_key])
if opts.verbose_test_configuration_only:
print
print "Example: execute 'mbedgt --target=TARGET_NAME' to start testing for TARGET_NAME target"
return (0)
gt_logger.gt_log("all tests finished!")
# We will execute post test hooks on tests
for yotta_target in test_report:
test_name_list = [] # All test case names for particular yotta target
for test_name in test_report[yotta_target]:
test = test_report[yotta_target][test_name]
# Test was successful
if test['single_test_result'] in [
TEST_RESULT_OK, TEST_RESULT_FAIL
]:
test_name_list.append(test_name)
# Call hook executed for each test, just after all tests are finished
if greentea_hooks:
# We can execute this test hook just after all tests are finished ('hook_post_test_end')
format = {
"test_name": test_name,
"test_bin_name": test['test_bin_name'],
"image_path": test['image_path'],
"build_path": test['build_path'],
"build_path_abs": test['build_path_abs'],
"yotta_target_name": yotta_target,
}
greentea_hooks.run_hook_ext('hook_post_test_end', format)
if greentea_hooks:
# Call hook executed for each yotta target, just after all tests are finished
build_path = os.path.join("./build", yotta_target)
build_path_abs = os.path.abspath(build_path)
# We can execute this test hook just after all tests are finished ('hook_post_test_end')
format = {
"build_path": build_path,
"build_path_abs": build_path_abs,
"test_name_list": test_name_list,
"yotta_target_name": yotta_target,
}
greentea_hooks.run_hook_ext('hook_post_all_test_end', format)
# This tool is designed to work in CI
# We want to return success codes based on tool actions,
# only if testes were executed and all passed we want to
# return 0 (success)
if not opts.only_build_tests:
# Prints shuffle seed
gt_logger.gt_log("shuffle seed: %.*f" %
(SHUFFLE_SEED_ROUND, shuffle_random_seed))
# Reports (to file)
if opts.report_junit_file_name:
gt_logger.gt_log("exporting to JUnit file '%s'..." %
gt_logger.gt_bright(opts.report_junit_file_name))
junit_report = exporter_testcase_junit(
test_report, test_suite_properties=yotta_module.get_data())
with open(opts.report_junit_file_name, 'w') as f:
f.write(junit_report)
if opts.report_text_file_name:
gt_logger.gt_log("exporting to text '%s'..." %
gt_logger.gt_bright(opts.report_text_file_name))
text_report, text_results = exporter_text(test_report)
text_testcase_report, text_testcase_results = exporter_testcase_text(
test_report)
with open(opts.report_text_file_name, 'w') as f:
f.write('\n'.join([
text_report, text_results, text_testcase_report,
text_testcase_results
]))
# Reports (to console)
if opts.report_json:
# We will not print summary and json report together
gt_logger.gt_log("json test report:")
print exporter_json(test_report)
else:
# Final summary
if test_report:
# Test suite report
gt_logger.gt_log("test suite report:")
text_report, text_results = exporter_text(test_report)
print text_report
gt_logger.gt_log("test suite results: " + text_results)
# test case detailed report
gt_logger.gt_log("test case report:")
text_testcase_report, text_testcase_results = exporter_testcase_text(
test_report, test_suite_properties=yotta_module.get_data())
print text_testcase_report
gt_logger.gt_log("test case results: " + text_testcase_results)
# This flag guards 'build only' so we expect only yotta errors
if test_platforms_match == 0:
# No tests were executed
gt_logger.gt_log_warn(
"no platform/target matching tests were found!")
test_exec_retcode += -10
if target_platforms_match == 0:
# No platforms were tested
gt_logger.gt_log_warn("no target matching platforms were found!")
test_exec_retcode += -100
return (test_exec_retcode)
def run_test_thread(test_result_queue, test_queue, opts, mut, mut_info,
yotta_target_name, greentea_hooks):
test_exec_retcode = 0
test_platforms_match = 0
test_report = {}
yotta_config_baudrate = None # Default serial port baudrate forced by configuration
yotta_config = YottaConfig()
yotta_config.init(yotta_target_name)
yotta_config_baudrate = yotta_config.get_baudrate()
while not test_queue.empty():
try:
test = test_queue.get(False)
except Exception as e:
gt_logger.gt_log_err(str(e))
break
test_result = 'SKIPPED'
disk = mut['mount_point']
port = mut['serial_port']
micro = mut['platform_name']
program_cycle_s = mut_info['properties']['program_cycle_s']
copy_method = opts.copy_method if opts.copy_method else 'shell'
verbose = opts.verbose_test_result_only
enum_host_tests_path = get_local_host_tests_dir(opts.enum_host_tests)
# We will force configuration specific baudrate
if port:
port = "%s:%d" % (port, yotta_config_baudrate)
test_platforms_match += 1
host_test_result = run_host_test(
test['image_path'],
disk,
port,
yotta_target_name,
mut['target_id'],
micro=micro,
copy_method=copy_method,
program_cycle_s=program_cycle_s,
digest_source=opts.digest_source,
json_test_cfg=opts.json_test_configuration,
enum_host_tests_path=enum_host_tests_path,
verbose=verbose)
# Some error in htrun, abort test execution
if host_test_result < 0:
break
single_test_result, single_test_output, single_testduration, single_timeout, result_test_cases, test_cases_summary = host_test_result
test_result = single_test_result
build_path = os.path.join("./build", yotta_target_name)
build_path_abs = os.path.abspath(build_path)
if single_test_result != TEST_RESULT_OK:
test_exec_retcode += 1
if single_test_result in [TEST_RESULT_OK, TEST_RESULT_FAIL]:
if greentea_hooks:
# Test was successful
# We can execute test hook just after test is finished ('hook_test_end')
format = {
"test_name": test['test_bin'],
"test_bin_name": os.path.basename(test['image_path']),
"image_path": test['image_path'],
"build_path": build_path,
"build_path_abs": build_path_abs,
"yotta_target_name": yotta_target_name,
}
greentea_hooks.run_hook_ext('hook_test_end', format)
# Update report for optional reporting feature
test_suite_name = test['test_bin'].lower()
if yotta_target_name not in test_report:
test_report[yotta_target_name] = {}
if test_suite_name not in test_report[yotta_target_name]:
test_report[yotta_target_name][test_suite_name] = {}
if not test_cases_summary and not result_test_cases:
gt_logger.gt_log_warn("test case summary event not found")
gt_logger.gt_log_tab(
"no test case report present, assuming test suite to be a single test case!"
)
# We will map test suite result to test case to
# output valid test case in report
# Generate "artificial" test case name from test suite name#
# E.g:
# mbed-drivers-test-dev_null -> dev_null
test_case_name = test_suite_name
test_str_idx = test_suite_name.find("-test-")
if test_str_idx != -1:
test_case_name = test_case_name[test_str_idx + 6:]
gt_logger.gt_log_tab("test suite: %s" % test_suite_name)
gt_logger.gt_log_tab("test case: %s" % test_case_name)
# Test case result: OK, FAIL or ERROR
tc_result_text = {
"OK": "OK",
"FAIL": "FAIL",
}.get(single_test_result, 'ERROR')
# Test case integer success code OK, FAIL and ERROR: (0, >0, <0)
tc_result = {
"OK": 0,
"FAIL": 1024,
"ERROR": -1024,
}.get(tc_result_text, '-2048')
# Test case passes and failures: (1 pass, 0 failures) or (0 passes, 1 failure)
tc_passed, tc_failed = {
0: (1, 0),
}.get(tc_result, (0, 1))
# Test case report build for whole binary
# Add test case made from test suite result to test case report
result_test_cases = {
test_case_name: {
'duration': single_testduration,
'time_start': 0.0,
'time_end': 0.0,
'utest_log': single_test_output.splitlines(),
'result_text': tc_result_text,
'passed': tc_passed,
'failed': tc_failed,
'result': tc_result,
}
}
# Test summary build for whole binary (as a test case)
test_cases_summary = (
tc_passed,
tc_failed,
)
gt_logger.gt_log("test on hardware with target id: %s" %
(mut['target_id']))
gt_logger.gt_log(
"test suite '%s' %s %s in %.2f sec" %
(test['test_bin'], '.' *
(80 - len(test['test_bin'])), test_result, single_testduration))
# Test report build for whole binary
test_report[yotta_target_name][test_suite_name][
'single_test_result'] = single_test_result
test_report[yotta_target_name][test_suite_name][
'single_test_output'] = single_test_output
test_report[yotta_target_name][test_suite_name][
'elapsed_time'] = single_testduration
test_report[yotta_target_name][test_suite_name][
'platform_name'] = micro
test_report[yotta_target_name][test_suite_name][
'copy_method'] = copy_method
test_report[yotta_target_name][test_suite_name][
'testcase_result'] = result_test_cases
test_report[yotta_target_name][test_suite_name][
'build_path'] = build_path
test_report[yotta_target_name][test_suite_name][
'build_path_abs'] = build_path_abs
test_report[yotta_target_name][test_suite_name]['image_path'] = test[
'image_path']
test_report[yotta_target_name][test_suite_name][
'test_bin_name'] = os.path.basename(test['image_path'])
passes_cnt, failures_cnt = 0, 0
for tc_name in sorted(result_test_cases.keys()):
gt_logger.gt_log_tab(
"test case: '%s' %s %s in %.2f sec" %
(tc_name, '.' * (80 - len(tc_name)),
result_test_cases[tc_name].get('result_text', '_'),
result_test_cases[tc_name].get('duration', 0.0)))
if result_test_cases[tc_name].get('result_text', '_') == 'OK':
passes_cnt += 1
else:
failures_cnt += 1
if test_cases_summary:
passes, failures = test_cases_summary
gt_logger.gt_log("test case summary: %d pass%s, %d failur%s" %
(passes, '' if passes == 1 else 'es', failures,
'e' if failures == 1 else 'es'))
if passes != passes_cnt or failures != failures_cnt:
gt_logger.gt_log_err(
"test case summary mismatch: reported passes vs failures miscount!"
)
gt_logger.gt_log_tab(
"(%d, %d) vs (%d, %d)" %
(passes, failures, passes_cnt, failures_cnt))
if single_test_result != 'OK' and not verbose and opts.report_fails:
# In some cases we want to print console to see why test failed
# even if we are not in verbose mode
gt_logger.gt_log_tab(
"test failed, reporting console output (specified with --report-fails option)"
)
print
print single_test_output
#greentea_release_target_id(mut['target_id'], gt_instance_uuid)
test_result_queue.put({
'test_platforms_match': test_platforms_match,
'test_exec_retcode': test_exec_retcode,
'test_report': test_report
})
return
def main_cli(opts, args, gt_instance_uuid=None):
"""! This is main CLI function with all command line parameters
@details This function also implements CLI workflow depending on CLI parameters inputed
@return This function doesn't return, it exits to environment with proper success code
"""
if not MBED_LMTOOLS:
gt_logger.gt_log_err("error: mbed-ls proprietary module not installed")
return (-1)
if not MBED_HOST_TESTS:
gt_logger.gt_log_err("error: mbed-host-tests proprietary module not installed")
return (-1)
# This is how you magically control colours in this piece of art software
gt_logger.colorful(not opts.plain)
# List available test binaries (names, no extension)
if opts.list_binaries:
list_binaries_for_targets()
return (0)
# Prints version and exits
if opts.version:
print_version()
return (0)
# We will load hooks from JSON file to support extra behaviour during test execution
greentea_hooks = GreenteaHooks(opts.hooks_json) if opts.hooks_json else None
# Capture alternative test console inputs, used e.g. in 'yotta test command'
if opts.digest_source:
enum_host_tests_path = get_local_host_tests_dir(opts.enum_host_tests)
host_test_result = run_host_test(None,
None,
None,
None,
None,
hooks=greentea_hooks,
digest_source=opts.digest_source,
enum_host_tests_path=enum_host_tests_path,
verbose=opts.verbose_test_result_only)
single_test_result, single_test_output, single_testduration, single_timeout, result_test_cases, test_cases_summary = host_test_result
status = TEST_RESULTS.index(single_test_result) if single_test_result in TEST_RESULTS else -1
return (status)
### Read yotta module basic information
yotta_module = YottaModule()
yotta_module.init() # Read actual yotta module data
# Check if NO greentea-client is in module.json of repo to test, if so abort
if not yotta_module.check_greentea_client():
gt_logger.gt_log("""
*****************************************************************************************
* We've noticed that NO 'greentea-client' module is specified in *
* dependency/testDependency section of this module's 'module.json' file. *
* *
* This version of Greentea requires 'greentea-client' module. *
* Please downgrade to Greentea before v0.2.0: *
* *
* $ pip install "mbed-greentea<0.2.0" --upgrade *
* *
* or port your tests to new Async model: https://github.com/ARMmbed/greentea/pull/78 *
*****************************************************************************************
""")
return (0)
### Selecting yotta targets to process
yt_targets = [] # List of yotta targets specified by user used to process during this run
if opts.list_of_targets:
yt_targets = opts.list_of_targets.split(',')
else:
# Trying to use locally set yotta target
gt_logger.gt_log("checking for yotta target in current directory")
gt_logger.gt_log_tab("reason: no --target switch set")
current_target = get_mbed_target_from_current_dir()
if current_target:
gt_logger.gt_log("assuming default target as '%s'"% gt_logger.gt_bright(current_target))
# Assuming first target printed by 'yotta search' will be used
yt_targets = [current_target]
else:
gt_logger.gt_log_tab("yotta target in current directory is not set")
gt_logger.gt_log_err("yotta target is not specified. Use '%s' or '%s' command to set target"%
(
gt_logger.gt_bright('mbedgt -t <yotta_target>'),
gt_logger.gt_bright('yotta target <yotta_target>')
))
return (-1)
### Query with mbedls for available mbed-enabled devices
gt_logger.gt_log("detecting connected mbed-enabled devices...")
# Detect devices connected to system
mbeds = mbed_lstools.create()
mbeds_list = mbeds.list_mbeds_ext()
ready_mbed_devices = [] # Devices which can be used (are fully detected)
if mbeds_list:
gt_logger.gt_log("detected %d device%s"% (len(mbeds_list), 's' if len(mbeds_list) != 1 else ''))
for mut in mbeds_list:
if not all(mut.values()):
gt_logger.gt_log_err("can't detect all properties of the device!")
for prop in mut:
if not mut[prop]:
gt_logger.gt_log_tab("property '%s' is '%s'"% (prop, str(mut[prop])))
else:
ready_mbed_devices.append(mut)
gt_logger.gt_log_tab("detected '%s' -> '%s', console at '%s', mounted at '%s', target id '%s'"% (
gt_logger.gt_bright(mut['platform_name']),
gt_logger.gt_bright(mut['platform_name_unique']),
gt_logger.gt_bright(mut['serial_port']),
gt_logger.gt_bright(mut['mount_point']),
gt_logger.gt_bright(mut['target_id'])
))
else:
gt_logger.gt_log_err("no devices detected")
return (RET_NO_DEVICES)
### Use yotta to search mapping between platform names and available platforms
# Convert platform:target, ... mapping to data structure
map_platform_to_yt_target = {}
if opts.map_platform_to_yt_target:
gt_logger.gt_log("user defined platform -> target supported mapping definition (specified with --map-target switch)")
p_to_t_mappings = opts.map_platform_to_yt_target.split(',')
for mapping in p_to_t_mappings:
if len(mapping.split(':')) == 2:
platform, yt_target = mapping.split(':')
if platform not in map_platform_to_yt_target:
map_platform_to_yt_target[platform] = []
map_platform_to_yt_target[platform].append(yt_target)
gt_logger.gt_log_tab("mapped platform '%s' to be compatible with '%s'"% (
gt_logger.gt_bright(platform),
gt_logger.gt_bright(yt_target)
))
else:
gt_logger.gt_log_tab("unknown format '%s', use 'platform:target' format"% mapping)
# Check if mbed classic target name can be translated to yotta target name
mut_info_map = {} # platform_name : mut_info_dict, extract yt_targets with e.g. [k["yotta_target"] for k in d['K64F']["yotta_targets"]]
for mut in ready_mbed_devices:
platfrom_name = mut['platform_name']
if platfrom_name not in mut_info_map:
mut_info = get_mbed_clasic_target_info(platfrom_name,
map_platform_to_yt_target,
use_yotta_registry=opts.yotta_search_for_mbed_target)
if mut_info:
mut_info_map[platfrom_name] = mut_info
### List of unique ready platform names
unique_mbed_devices = list(set(mut_info_map.keys()))
### Identify which targets has to be build because platforms are present
yt_target_platform_map = {} # yt_target_to_test : platforms to test on
for yt_target in yt_targets:
for platform_name in unique_mbed_devices:
if yt_target in [k["yotta_target"] for k in mut_info_map[platform_name]["yotta_targets"]]:
if yt_target not in yt_target_platform_map:
yt_target_platform_map[yt_target] = []
if platform_name not in yt_target_platform_map[yt_target]:
yt_target_platform_map[yt_target].append(platform_name)
### We can filter in only specific target ids
accepted_target_ids = None
if opts.use_target_ids:
gt_logger.gt_log("filtering out target ids not on below list (specified with --use-tids switch)")
accepted_target_ids = opts.use_target_ids.split(',')
for tid in accepted_target_ids:
gt_logger.gt_log_tab("accepting target id '%s'"% gt_logger.gt_bright(tid))
test_exec_retcode = 0 # Decrement this value each time test case result is not 'OK'
test_platforms_match = 0 # Count how many tests were actually ran with current settings
target_platforms_match = 0 # Count how many platforms were actually tested with current settings
test_report = {} # Test report used to export to Junit, HTML etc...
muts_to_test = [] # MUTs to actually be tested
test_queue = Queue() # contains information about test_bin and image_path for each test case
test_result_queue = Queue() # used to store results of each thread
execute_threads = [] # list of threads to run test cases
### check if argument of --parallel mode is a integer and greater or equal 1
try:
parallel_test_exec = int(opts.parallel_test_exec)
if parallel_test_exec < 1:
parallel_test_exec = 1
except ValueError:
gt_logger.gt_log_err("argument of mode --parallel is not a int, disable parallel mode")
parallel_test_exec = 1
# Values used to generate random seed for test execution order shuffle
SHUFFLE_SEED_ROUND = 10 # Value used to round float random seed
shuffle_random_seed = round(random.random(), SHUFFLE_SEED_ROUND)
# Set shuffle seed if it is provided with command line option
if opts.shuffle_test_seed:
shuffle_random_seed = round(float(opts.shuffle_test_seed), SHUFFLE_SEED_ROUND)
### Testing procedures, for each target, for each target's compatible platform
for yotta_target_name in yt_target_platform_map:
gt_logger.gt_log("processing '%s' yotta target compatible platforms..."% gt_logger.gt_bright(yotta_target_name))
for platform_name in yt_target_platform_map[yotta_target_name]:
gt_logger.gt_log("processing '%s' platform..."% gt_logger.gt_bright(platform_name))
### Select MUTS to test from list of available MUTS to start testing
mut = None
number_of_parallel_instances = 1
for mbed_dev in ready_mbed_devices:
if accepted_target_ids and mbed_dev['target_id'] not in accepted_target_ids:
continue
if mbed_dev['platform_name'] == platform_name:
mut = mbed_dev
muts_to_test.append(mbed_dev)
gt_logger.gt_log("using platform '%s' for test:"% gt_logger.gt_bright(platform_name))
for k in mbed_dev:
gt_logger.gt_log_tab("%s = '%s'"% (k, mbed_dev[k]))
if number_of_parallel_instances < parallel_test_exec:
number_of_parallel_instances += 1
else:
break
# Configuration print mode:
if opts.verbose_test_configuration_only:
continue
if mut:
target_platforms_match += 1
# Demo mode: --run implementation (already added --run to mbedhtrun)
# We want to pass file name to mbedhtrun (--run NAME => -f NAME_ and run only one binary
if opts.run_app:
gt_logger.gt_log("running '%s' for '%s'"% (gt_logger.gt_bright(opts.run_app), gt_logger.gt_bright(yotta_target_name)))
disk = mut['mount_point']
port = mut['serial_port']
micro = mut['platform_name']
program_cycle_s = mut_info_map[platfrom_name]['properties']['program_cycle_s']
copy_method = opts.copy_method if opts.copy_method else 'shell'
enum_host_tests_path = get_local_host_tests_dir(opts.enum_host_tests)
yotta_config = YottaConfig()
yotta_config.init(yotta_target_name)
yotta_config_baudrate = yotta_config.get_baudrate()
# We will force configuration specific baudrate
if port:
port = "%s:%d"% (port, yotta_config_baudrate)
test_platforms_match += 1
host_test_result = run_host_test(opts.run_app,
disk,
port,
yotta_target_name,
mut['target_id'],
micro=micro,
copy_method=copy_method,
program_cycle_s=program_cycle_s,
digest_source=opts.digest_source,
json_test_cfg=opts.json_test_configuration,
run_app=opts.run_app,
enum_host_tests_path=enum_host_tests_path,
verbose=True)
single_test_result, single_test_output, single_testduration, single_timeout, result_test_cases, test_cases_summary = host_test_result
status = TEST_RESULTS.index(single_test_result) if single_test_result in TEST_RESULTS else -1
if single_test_result != TEST_RESULT_OK:
test_exec_retcode += 1
continue
# Regression test mode:
# Building sources for given target and perform normal testing
yotta_result, yotta_ret = True, 0 # Skip build and assume 'yotta build' was successful
if opts.skip_yotta_build:
gt_logger.gt_log("skipping calling yotta (specified with --skip-build option)")
else:
yotta_result, yotta_ret = build_with_yotta(yotta_target_name,
verbose=opts.verbose,
build_to_release=opts.build_to_release,
build_to_debug=opts.build_to_debug)
# We need to stop executing if yotta build fails
if not yotta_result:
gt_logger.gt_log_err("yotta returned %d"% yotta_ret)
return (RET_YOTTA_BUILD_FAIL)
if opts.only_build_tests:
continue
# Build phase will be followed by test execution for each target
if yotta_result and not opts.only_build_tests:
binary_type = mut_info_map[platform_name]['properties']['binary_type']
ctest_test_list = load_ctest_testsuite(os.path.join('.', 'build', yotta_target_name),
binary_type=binary_type)
#TODO no tests to execute
filtered_ctest_test_list = create_filtered_test_list(ctest_test_list, opts.test_by_names, opts.skip_test)
gt_logger.gt_log("running %d test%s for target '%s' and platform '%s'"% (
len(filtered_ctest_test_list),
"s" if len(filtered_ctest_test_list) != 1 else "",
gt_logger.gt_bright(yotta_target_name),
gt_logger.gt_bright(platform_name)
))
# Test execution order can be shuffled (also with provided random seed)
# for test execution reproduction.
filtered_ctest_test_list_keys = filtered_ctest_test_list.keys()
if opts.shuffle_test_order:
# We want to shuffle test names randomly
random.shuffle(filtered_ctest_test_list_keys, lambda: shuffle_random_seed)
for test_bin in filtered_ctest_test_list_keys:
image_path = filtered_ctest_test_list[test_bin]
test = {"test_bin":test_bin, "image_path":image_path}
test_queue.put(test)
#for test_bin, image_path in filtered_ctest_test_list.iteritems():
# test = {"test_bin":test_bin, "image_path":image_path}
# test_queue.put(test)
number_of_threads = 0
for mut in muts_to_test:
#################################################################
# Experimental, parallel test execution
#################################################################
if number_of_threads < parallel_test_exec:
args = (test_result_queue, test_queue, opts, mut, mut_info, yotta_target_name, greentea_hooks)
t = Thread(target=run_test_thread, args=args)
execute_threads.append(t)
number_of_threads += 1
gt_logger.gt_log_tab("use %s instance%s for testing" % (len(execute_threads), 's' if len(execute_threads) != 1 else ''))
for t in execute_threads:
t.daemon = True
t.start()
# merge partial test reports from diffrent threads to final test report
for t in execute_threads:
try:
t.join() #blocking
test_return_data = test_result_queue.get(False)
except Exception as e:
# No test report generated
gt_logger.gt_log_err("could not generate test report" + str(e))
test_exec_retcode += -1000
return test_exec_retcode
test_platforms_match += test_return_data['test_platforms_match']
test_exec_retcode += test_return_data['test_exec_retcode']
partial_test_report = test_return_data['test_report']
# todo: find better solution, maybe use extend
for report_key in partial_test_report.keys():
if report_key not in test_report:
test_report[report_key] = {}
test_report.update(partial_test_report)
else:
test_report[report_key].update(partial_test_report[report_key])
if opts.verbose_test_configuration_only:
print
print "Example: execute 'mbedgt --target=TARGET_NAME' to start testing for TARGET_NAME target"
return (0)
gt_logger.gt_log("all tests finished!")
# We will execute post test hooks on tests
for yotta_target in test_report:
test_name_list = [] # All test case names for particular yotta target
for test_name in test_report[yotta_target]:
test = test_report[yotta_target][test_name]
# Test was successful
if test['single_test_result'] in [TEST_RESULT_OK, TEST_RESULT_FAIL]:
test_name_list.append(test_name)
# Call hook executed for each test, just after all tests are finished
if greentea_hooks:
# We can execute this test hook just after all tests are finished ('hook_post_test_end')
format = {
"test_name": test_name,
"test_bin_name": test['test_bin_name'],
"image_path": test['image_path'],
"build_path": test['build_path'],
"build_path_abs": test['build_path_abs'],
"yotta_target_name": yotta_target,
}
greentea_hooks.run_hook_ext('hook_post_test_end', format)
if greentea_hooks:
# Call hook executed for each yotta target, just after all tests are finished
build_path = os.path.join("./build", yotta_target)
build_path_abs = os.path.abspath(build_path)
# We can execute this test hook just after all tests are finished ('hook_post_test_end')
format = {
"build_path": build_path,
"build_path_abs": build_path_abs,
"test_name_list": test_name_list,
"yotta_target_name": yotta_target,
}
greentea_hooks.run_hook_ext('hook_post_all_test_end', format)
# This tool is designed to work in CI
# We want to return success codes based on tool actions,
# only if testes were executed and all passed we want to
# return 0 (success)
if not opts.only_build_tests:
# Prints shuffle seed
gt_logger.gt_log("shuffle seed: %.*f"% (SHUFFLE_SEED_ROUND, shuffle_random_seed))
# Reports (to file)
if opts.report_junit_file_name:
gt_logger.gt_log("exporting to JUnit file '%s'..."% gt_logger.gt_bright(opts.report_junit_file_name))
junit_report = exporter_testcase_junit(test_report, test_suite_properties=yotta_module.get_data())
with open(opts.report_junit_file_name, 'w') as f:
f.write(junit_report)
if opts.report_text_file_name:
gt_logger.gt_log("exporting to text '%s'..."% gt_logger.gt_bright(opts.report_text_file_name))
text_report, text_results = exporter_text(test_report)
text_testcase_report, text_testcase_results = exporter_testcase_text(test_report)
with open(opts.report_text_file_name, 'w') as f:
f.write('\n'.join([text_report, text_results, text_testcase_report, text_testcase_results]))
# Reports (to console)
if opts.report_json:
# We will not print summary and json report together
gt_logger.gt_log("json test report:")
print exporter_json(test_report)
else:
# Final summary
if test_report:
# Test suite report
gt_logger.gt_log("test suite report:")
text_report, text_results = exporter_text(test_report)
print text_report
gt_logger.gt_log("test suite results: " + text_results)
# test case detailed report
gt_logger.gt_log("test case report:")
text_testcase_report, text_testcase_results = exporter_testcase_text(test_report, test_suite_properties=yotta_module.get_data())
print text_testcase_report
gt_logger.gt_log("test case results: " + text_testcase_results)
# This flag guards 'build only' so we expect only yotta errors
if test_platforms_match == 0:
# No tests were executed
gt_logger.gt_log_warn("no platform/target matching tests were found!")
test_exec_retcode += -10
if target_platforms_match == 0:
# No platforms were tested
gt_logger.gt_log_warn("no target matching platforms were found!")
test_exec_retcode += -100
return (test_exec_retcode)
def run_test_thread(test_result_queue, test_queue, opts, mut, mut_info, yotta_target_name, greentea_hooks):
test_exec_retcode = 0
test_platforms_match = 0
test_report = {}
yotta_config_baudrate = None # Default serial port baudrate forced by configuration
yotta_config = YottaConfig()
yotta_config.init(yotta_target_name)
yotta_config_baudrate = yotta_config.get_baudrate()
while not test_queue.empty():
try:
test = test_queue.get(False)
except Exception as e:
gt_logger.gt_log_err(str(e))
break
test_result = 'SKIPPED'
disk = mut['mount_point']
port = mut['serial_port']
micro = mut['platform_name']
program_cycle_s = mut_info['properties']['program_cycle_s']
copy_method = opts.copy_method if opts.copy_method else 'shell'
verbose = opts.verbose_test_result_only
enum_host_tests_path = get_local_host_tests_dir(opts.enum_host_tests)
# We will force configuration specific baudrate
if port:
port = "%s:%d"% (port, yotta_config_baudrate)
test_platforms_match += 1
host_test_result = run_host_test(test['image_path'],
disk,
port,
yotta_target_name,
mut['target_id'],
micro=micro,
copy_method=copy_method,
program_cycle_s=program_cycle_s,
digest_source=opts.digest_source,
json_test_cfg=opts.json_test_configuration,
enum_host_tests_path=enum_host_tests_path,
verbose=verbose)
# Some error in htrun, abort test execution
if host_test_result < 0:
break
single_test_result, single_test_output, single_testduration, single_timeout, result_test_cases, test_cases_summary = host_test_result
test_result = single_test_result
build_path = os.path.join("./build", yotta_target_name)
build_path_abs = os.path.abspath(build_path)
if single_test_result != TEST_RESULT_OK:
test_exec_retcode += 1
if single_test_result in [TEST_RESULT_OK, TEST_RESULT_FAIL]:
if greentea_hooks:
# Test was successful
# We can execute test hook just after test is finished ('hook_test_end')
format = {
"test_name": test['test_bin'],
"test_bin_name": os.path.basename(test['image_path']),
"image_path": test['image_path'],
"build_path": build_path,
"build_path_abs": build_path_abs,
"yotta_target_name": yotta_target_name,
}
greentea_hooks.run_hook_ext('hook_test_end', format)
# Update report for optional reporting feature
test_suite_name = test['test_bin'].lower()
if yotta_target_name not in test_report:
test_report[yotta_target_name] = {}
if test_suite_name not in test_report[yotta_target_name]:
test_report[yotta_target_name][test_suite_name] = {}
if not test_cases_summary and not result_test_cases:
gt_logger.gt_log_warn("test case summary event not found")
gt_logger.gt_log_tab("no test case report present, assuming test suite to be a single test case!")
# We will map test suite result to test case to
# output valid test case in report
# Generate "artificial" test case name from test suite name#
# E.g:
# mbed-drivers-test-dev_null -> dev_null
test_case_name = test_suite_name
test_str_idx = test_suite_name.find("-test-")
if test_str_idx != -1:
test_case_name = test_case_name[test_str_idx + 6:]
gt_logger.gt_log_tab("test suite: %s"% test_suite_name)
gt_logger.gt_log_tab("test case: %s"% test_case_name)
# Test case result: OK, FAIL or ERROR
tc_result_text = {
"OK": "OK",
"FAIL": "FAIL",
}.get(single_test_result, 'ERROR')
# Test case integer success code OK, FAIL and ERROR: (0, >0, <0)
tc_result = {
"OK": 0,
"FAIL": 1024,
"ERROR": -1024,
}.get(tc_result_text, '-2048')
# Test case passes and failures: (1 pass, 0 failures) or (0 passes, 1 failure)
tc_passed, tc_failed = {
0: (1, 0),
}.get(tc_result, (0, 1))
# Test case report build for whole binary
# Add test case made from test suite result to test case report
result_test_cases = {
test_case_name: {
'duration': single_testduration,
'time_start': 0.0,
'time_end': 0.0,
'utest_log': single_test_output.splitlines(),
'result_text': tc_result_text,
'passed': tc_passed,
'failed': tc_failed,
'result': tc_result,
}
}
# Test summary build for whole binary (as a test case)
test_cases_summary = (tc_passed, tc_failed, )
gt_logger.gt_log("test on hardware with target id: %s"% (mut['target_id']))
gt_logger.gt_log("test suite '%s' %s %s in %.2f sec"% (test['test_bin'],
'.' * (80 - len(test['test_bin'])),
test_result,
single_testduration))
# Test report build for whole binary
test_report[yotta_target_name][test_suite_name]['single_test_result'] = single_test_result
test_report[yotta_target_name][test_suite_name]['single_test_output'] = single_test_output
test_report[yotta_target_name][test_suite_name]['elapsed_time'] = single_testduration
test_report[yotta_target_name][test_suite_name]['platform_name'] = micro
test_report[yotta_target_name][test_suite_name]['copy_method'] = copy_method
test_report[yotta_target_name][test_suite_name]['testcase_result'] = result_test_cases
test_report[yotta_target_name][test_suite_name]['build_path'] = build_path
test_report[yotta_target_name][test_suite_name]['build_path_abs'] = build_path_abs
test_report[yotta_target_name][test_suite_name]['image_path'] = test['image_path']
test_report[yotta_target_name][test_suite_name]['test_bin_name'] = os.path.basename(test['image_path'])
passes_cnt, failures_cnt = 0, 0
for tc_name in sorted(result_test_cases.keys()):
gt_logger.gt_log_tab("test case: '%s' %s %s in %.2f sec"% (tc_name,
'.' * (80 - len(tc_name)),
result_test_cases[tc_name].get('result_text', '_'),
result_test_cases[tc_name].get('duration', 0.0)))
if result_test_cases[tc_name].get('result_text', '_') == 'OK':
passes_cnt += 1
else:
failures_cnt += 1
if test_cases_summary:
passes, failures = test_cases_summary
gt_logger.gt_log("test case summary: %d pass%s, %d failur%s"% (passes,
'' if passes == 1 else 'es',
failures,
'e' if failures == 1 else 'es'))
if passes != passes_cnt or failures != failures_cnt:
gt_logger.gt_log_err("test case summary mismatch: reported passes vs failures miscount!")
gt_logger.gt_log_tab("(%d, %d) vs (%d, %d)"% (passes, failures, passes_cnt, failures_cnt))
if single_test_result != 'OK' and not verbose and opts.report_fails:
# In some cases we want to print console to see why test failed
# even if we are not in verbose mode
gt_logger.gt_log_tab("test failed, reporting console output (specified with --report-fails option)")
print
print single_test_output
#greentea_release_target_id(mut['target_id'], gt_instance_uuid)
test_result_queue.put({'test_platforms_match': test_platforms_match,
'test_exec_retcode': test_exec_retcode,
'test_report': test_report})
return
def test_get_baudrate_None(self):
yotta_config = YottaConfig()
yotta_config.set_yotta_config(None)
self.assertEqual(yotta_config.get_baudrate(),
yotta_config.DEFAULT_BAUDRATE)
self.assertEqual(115200, yotta_config.DEFAULT_BAUDRATE)
def test_get_baudrate_default_115200_no_yotta_config(self):
yotta_config = YottaConfig()
self.assertEqual(yotta_config.get_baudrate(),
yotta_config.DEFAULT_BAUDRATE)
def test_get_baudrate_38400(self):
yotta_config = YottaConfig()
yotta_config.set_yotta_config(self.YOTTA_CONFIG_SHORT)
self.assertEqual(yotta_config.get_baudrate(), 38400)
def test_get_baudrate_9600(self):
yotta_config = YottaConfig()
yotta_config.set_yotta_config(self.YOTTA_CONFIG_LONG)
self.assertEqual(yotta_config.get_baudrate(), 9600)
def get_test_spec_from_yt_module(opts):
"""
Gives test specification created from yotta module environment.
:return TestSpec:
"""
### Read yotta module basic information
yotta_module = YottaModule()
yotta_module.init() # Read actual yotta module data
# Check if NO greentea-client is in module.json of repo to test, if so abort
if not yotta_module.check_greentea_client():
error = """
*****************************************************************************************
* We've noticed that NO 'greentea-client' module is specified in *
* dependency/testDependency section of this module's 'module.json' file. *
* *
* This version of Greentea requires 'greentea-client' module. *
* Please downgrade to Greentea before v0.2.0: *
* *
* $ pip install "mbed-greentea<0.2.0" --upgrade *
* *
* or port your tests to new Async model: https://github.com/ARMmbed/greentea/pull/78 *
*****************************************************************************************
"""
raise YottaError(error)
test_spec = TestSpec()
### Selecting yotta targets to process
yt_targets = [] # List of yotta targets specified by user used to process during this run
if opts.list_of_targets:
yt_targets = opts.list_of_targets.split(',')
else:
# Trying to use locally set yotta target
gt_logger.gt_log("checking for yotta target in current directory")
gt_logger.gt_log_tab("reason: no --target switch set")
current_target = get_mbed_target_from_current_dir()
if current_target:
gt_logger.gt_log("assuming default target as '%s'"% gt_logger.gt_bright(current_target))
# Assuming first target printed by 'yotta search' will be used
yt_targets = [current_target]
else:
gt_logger.gt_log_tab("yotta target in current directory is not set")
gt_logger.gt_log_err("yotta target is not specified. Use '%s' or '%s' command to set target"%
(
gt_logger.gt_bright('mbedgt -t <yotta_target>'),
gt_logger.gt_bright('yotta target <yotta_target>')
))
raise YottaError("Yotta target not set in current directory!")
### Use yotta to search mapping between platform names and available platforms
# Convert platform:target, ... mapping to data structure
yt_target_to_map_platform = {}
if opts.map_platform_to_yt_target:
gt_logger.gt_log("user defined platform -> target supported mapping definition (specified with --map-target switch)")
for mapping in opts.map_platform_to_yt_target.split(','):
if len(mapping.split(':')) == 2:
yt_target, platform = mapping.split(':')
yt_target_to_map_platform[yt_target] = platform
gt_logger.gt_log_tab("mapped yotta target '%s' to be compatible with platform '%s'"% (
gt_logger.gt_bright(yt_target),
gt_logger.gt_bright(platform)
))
else:
gt_logger.gt_log_tab("unknown format '%s', use 'target:platform' format"% mapping)
for yt_target in yt_targets:
if yt_target in yt_target_to_map_platform:
platform = yt_target_to_map_platform[yt_target]
else:
# get it from local Yotta target
platform = get_platform_name_from_yotta_target(yt_target)
# Toolchain doesn't matter as Greentea does not have to do any selection for it unlike platform
toolchain = yt_target
yotta_config = YottaConfig()
yotta_config.init(yt_target)
baud_rate = yotta_config.get_baudrate()
base_path = os.path.join('.', 'build', yt_target)
tb = TestBuild(yt_target, platform, toolchain, baud_rate, base_path)
test_spec.add_test_builds(yt_target, tb)
# Find tests
ctest_test_list = load_ctest_testsuite(base_path,
binary_type=get_binary_type_for_platform(platform))
for name, path in ctest_test_list.iteritems():
t = Test(name)
t.add_binary(path, TestBinary.BIN_TYPE_BOOTABLE)
tb.add_test(name, t)
return test_spec
def test_get_baudrate_None(self):
yotta_config = YottaConfig()
yotta_config.set_yotta_config(None)
self.assertEqual(yotta_config.get_baudrate(), yotta_config.DEFAULT_BAUDRATE)
self.assertEqual(115200, yotta_config.DEFAULT_BAUDRATE)
def test_get_baudrate_default_115200_no_yotta_config(self):
yotta_config = YottaConfig()
self.assertEqual(yotta_config.get_baudrate(), yotta_config.DEFAULT_BAUDRATE)
def test_get_baudrate_38400(self):
yotta_config = YottaConfig()
yotta_config.set_yotta_config(self.YOTTA_CONFIG_SHORT)
self.assertEqual(yotta_config.get_baudrate(), 38400)
def test_get_baudrate_9600(self):
yotta_config = YottaConfig()
yotta_config.set_yotta_config(self.YOTTA_CONFIG_LONG)
self.assertEqual(yotta_config.get_baudrate(), 9600)
def get_test_spec_from_yt_module(opts):
"""
Gives test specification created from yotta module environment.
:return TestSpec:
"""
### Read yotta module basic information
yotta_module = YottaModule()
yotta_module.init() # Read actual yotta module data
# Check if NO greentea-client is in module.json of repo to test, if so abort
if not yotta_module.check_greentea_client():
error = """
*****************************************************************************************
* We've noticed that NO 'greentea-client' module is specified in *
* dependency/testDependency section of this module's 'module.json' file. *
* *
* This version of Greentea requires 'greentea-client' module. *
* Please downgrade to Greentea before v0.2.0: *
* *
* $ pip install "mbed-greentea<0.2.0" --upgrade *
* *
* or port your tests to new Async model: https://github.com/ARMmbed/greentea/pull/78 *
*****************************************************************************************
"""
raise YottaError(error)
test_spec = TestSpec()
### Selecting yotta targets to process
yt_targets = [
] # List of yotta targets specified by user used to process during this run
if opts.list_of_targets:
yt_targets = opts.list_of_targets.split(',')
else:
# Trying to use locally set yotta target
gt_logger.gt_log("checking for yotta target in current directory")
gt_logger.gt_log_tab("reason: no --target switch set")
current_target = get_mbed_target_from_current_dir()
if current_target:
gt_logger.gt_log("assuming default target as '%s'" %
gt_logger.gt_bright(current_target))
# Assuming first target printed by 'yotta search' will be used
yt_targets = [current_target]
else:
gt_logger.gt_log_tab(
"yotta target in current directory is not set")
gt_logger.gt_log_err(
"yotta target is not specified. Use '%s' or '%s' command to set target"
% (gt_logger.gt_bright('mbedgt -t <yotta_target>'),
gt_logger.gt_bright('yotta target <yotta_target>')))
raise YottaError("Yotta target not set in current directory!")
### Use yotta to search mapping between platform names and available platforms
# Convert platform:target, ... mapping to data structure
yt_target_to_map_platform = {}
if opts.map_platform_to_yt_target:
gt_logger.gt_log(
"user defined platform -> target supported mapping definition (specified with --map-target switch)"
)
for mapping in opts.map_platform_to_yt_target.split(','):
if len(mapping.split(':')) == 2:
yt_target, platform = mapping.split(':')
yt_target_to_map_platform[yt_target] = platform
gt_logger.gt_log_tab(
"mapped yotta target '%s' to be compatible with platform '%s'"
% (gt_logger.gt_bright(yt_target),
gt_logger.gt_bright(platform)))
else:
gt_logger.gt_log_tab(
"unknown format '%s', use 'target:platform' format" %
mapping)
for yt_target in yt_targets:
if yt_target in yt_target_to_map_platform:
platform = yt_target_to_map_platform[yt_target]
else:
# get it from local Yotta target
platform = get_platform_name_from_yotta_target(yt_target)
# Toolchain doesn't matter as Greentea does not have to do any selection for it unlike platform
toolchain = yt_target
yotta_config = YottaConfig()
yotta_config.init(yt_target)
baud_rate = yotta_config.get_baudrate()
base_path = os.path.join('.', 'build', yt_target)
tb = TestBuild(yt_target, platform, toolchain, baud_rate, base_path)
test_spec.add_test_builds(yt_target, tb)
# Find tests
ctest_test_list = load_ctest_testsuite(
base_path, binary_type=get_binary_type_for_platform(platform))
for name, path in ctest_test_list.items():
t = Test(name)
t.add_binary(path, TestBinary.BIN_TYPE_BOOTABLE)
tb.add_test(name, t)
return test_spec