def reset_dev(port=None,
disk=None,
reset_type='default',
reset_timeout=1,
serial_port=None,
baudrate=115200,
timeout=1,
verbose=False):
"""! Reset device using pythonic interface
@param port Switch -p <port>
@param disk Switch -d <disk>
@param reset_type Switch -r <reset_type>
@param reset_timeout Switch -R <reset_timeout>
@param serial_port Serial port handler, set to None if you want this function to open serial
@param baudrate Serial port baudrate
@param timeout Serial port timeout
@param verbose Verbose mode
"""
result = False
if not serial_port:
try:
with Serial(port, baudrate=baudrate,
timeout=timeout) as serial_port:
result = host_tests_plugins.call_plugin('ResetMethod',
reset_type,
serial=serial_port,
disk=disk)
sleep(reset_timeout)
except SerialException as e:
if verbose:
print "%s" % (str(e))
result = False
return result
def reset_dev(port=None,
disk=None,
reset_type='default',
reset_timeout=1,
serial_port=None,
baudrate=115200,
timeout=1,
verbose=False):
"""! Reset device using pythonic interface
@param port Switch -p <port>
@param disk Switch -d <disk>
@param reset_type Switch -r <reset_type>
@param reset_timeout Switch -R <reset_timeout>
@param serial_port Serial port handler, set to None if you want this function to open serial
@param baudrate Serial port baudrate
@param timeout Serial port timeout
@param verbose Verbose mode
"""
result = False
if not serial_port:
try:
with Serial(port, baudrate=baudrate, timeout=timeout) as serial_port:
result = host_tests_plugins.call_plugin('ResetMethod',
reset_type,
serial=serial_port,
disk=disk)
sleep(reset_timeout)
except SerialException as e:
if verbose:
print "%s" % (str(e))
result = False
return result
def copy_image_raw(self,
image_path=None,
disk=None,
copy_method=None,
port=None):
"""! Copy file depending on method you want to use. Handles exception
and return code from shell copy commands.
@return Returns result from copy plugin
@details Method which is actually copying image to mbed
"""
# image_path - Where is binary with target's firmware
# Select copy_method
# We override 'default' method with 'shell' method
copy_method = {
None: 'shell',
'default': 'shell',
}.get(copy_method, copy_method)
result = ht_plugins.call_plugin('CopyMethod',
copy_method,
image_path=image_path,
serial=port,
destination_disk=disk,
target_id=self.target_id,
pooling_timeout=self.polling_timeout)
return result
def reset(self):
"""! Calls proper reset plugin to do the job.
@return Returns result from reset plugin
@details Please refer to host_test_plugins functionality
"""
# Flush serials to get only input after reset
self.flush()
if self.options.forced_reset_type:
result = ht_plugins.call_plugin('ResetMethod', self.options.forced_reset_type, disk=self.disk)
else:
result = ht_plugins.call_plugin('ResetMethod', 'default', serial=self.serial)
# Give time to wait for the image loading
reset_tout_s = self.options.forced_reset_timeout if self.options.forced_reset_timeout is not None else self.DEFAULT_RESET_TOUT
self.reset_timeout(reset_tout_s)
return result
def hw_reset(self):
"""
Performs hardware reset of target ned device.
:return:
"""
device_info = {}
result = ht_plugins.call_plugin('ResetMethod',
'power_cycle',
target_id=self.target_id,
device_info=device_info)
if result:
self.port = device_info['serial_port']
self.disk = device_info['mount_point']
return result
def hw_reset(self):
"""
Performs hardware reset of target ned device.
:return:
"""
device_info = {}
result = ht_plugins.call_plugin('ResetMethod',
'power_cycle',
target_id=self.target_id,
device_info=device_info)
if result:
self.port = device_info['serial_port']
self.disk = device_info['mount_point']
return result
def reset_dev_via_serial(self, delay=1):
"""! Reset device using selected method, calls one of the reset plugins """
reset_type = self.config.get('reset_type', 'default')
if not reset_type:
reset_type = 'default'
disk = self.config.get('disk', None)
self.logger.prn_inf("reset device using '%s' plugin..."% reset_type)
result = host_tests_plugins.call_plugin('ResetMethod',
reset_type,
serial=self.serial,
disk=disk)
# Post-reset sleep
self.logger.prn_inf("wait for it...")
sleep(delay)
return result
def copy_image_raw(self, image_path=None, disk=None, copy_method=None):
"""! Copy file depending on method you want to use. Handles exception
and return code from shell copy commands.
@return Returns result from copy plugin
@details Method which is actually copying image to mbed
"""
# image_path - Where is binary with target's firmware
if copy_method is not None:
# We override 'default' method with 'shell' method
if copy_method == 'default':
copy_method = 'shell'
else:
copy_method = 'shell'
result = ht_plugins.call_plugin('CopyMethod', copy_method, image_path=image_path, destination_disk=disk)
return result;
def reset_dev_via_serial(self, delay=1):
"""! Reset device using selected method, calls one of the reset plugins """
reset_type = self.config.get("reset_type", "default")
if not reset_type:
reset_type = "default"
disk = self.config.get("disk", None)
self.logger.prn_inf("reset device using '%s' plugin..." % reset_type)
result = host_tests_plugins.call_plugin(
"ResetMethod", reset_type, serial=self.serial, disk=disk, target_id=self.target_id
)
# Post-reset sleep
if delay:
self.logger.prn_inf("waiting %.2f sec after reset" % delay)
sleep(delay)
self.logger.prn_inf("wait for it...")
return result
def reset_dev_via_serial(self, delay=1):
"""! Reset device using selected method, calls one of the reset plugins """
reset_type = self.config.get('reset_type', 'default')
if not reset_type:
reset_type = 'default'
disk = self.config.get('disk', None)
self.logger.prn_inf("reset device using '%s' plugin..." % reset_type)
result = host_tests_plugins.call_plugin('ResetMethod',
reset_type,
serial=self.serial,
disk=disk,
target_id=self.target_id)
# Post-reset sleep
if delay:
self.logger.prn_inf("waiting %.2f sec after reset" % delay)
sleep(delay)
self.logger.prn_inf("wait for it...")
return result
def reset(self):
"""! Calls proper reset plugin to do the job.
@return Returns result from reset plugin
@details Please refer to host_test_plugins functionality
"""
# Flush serials to get only input after reset
self.flush()
if self.options.forced_reset_type:
reset_method = self.options.forced_reset_type
else:
reset_method = 'default'
result = ht_plugins.call_plugin('ResetMethod', reset_method,
serial=self.serial, disk=self.disk,
image_path=self.image_path)
# Give time to wait for the image loading
reset_tout_s = self.options.forced_reset_timeout if self.options.forced_reset_timeout is not None else self.DEFAULT_RESET_TOUT
self.reset_timeout(reset_tout_s)
return result
def flash_dev(disk=None,
image_path=None,
copy_method='default',
port=None,
program_cycle_s=4):
"""! Flash device using pythonic interface
@param disk Switch -d <disk>
@param image_path Switch -f <image_path>
@param copy_method Switch -c <copy_method> (default: shell)
@param port Switch -p <port>
"""
if copy_method == 'default':
copy_method = 'shell'
result = False
result = host_tests_plugins.call_plugin('CopyMethod',
copy_method,
image_path=image_path,
serial=port,
destination_disk=disk)
sleep(program_cycle_s)
return result
def copy_image_raw(self, image_path=None, disk=None, copy_method=None, port=None):
"""! Copy file depending on method you want to use. Handles exception
and return code from shell copy commands.
@return Returns result from copy plugin
@details Method which is actually copying image to mbed
"""
# image_path - Where is binary with target's firmware
if copy_method is not None:
# We override 'default' method with 'shell' method
if copy_method == 'default':
copy_method = 'shell'
else:
copy_method = 'shell'
result = ht_plugins.call_plugin('CopyMethod',
copy_method,
image_path=image_path,
serial=port,
destination_disk=disk)
return result;
def flash_dev(disk=None,
image_path=None,
copy_method='default',
port=None,
program_cycle_s=4):
"""! Flash device using pythonic interface
@param disk Switch -d <disk>
@param image_path Switch -f <image_path>
@param copy_method Switch -c <copy_method> (default: shell)
@param port Switch -p <port>
"""
if copy_method == 'default':
copy_method = 'shell'
result = False
result = host_tests_plugins.call_plugin('CopyMethod',
copy_method,
image_path=image_path,
serial=port,
destination_disk=disk)
sleep(program_cycle_s)
return result
def copy_image_raw(self, image_path=None, disk=None, copy_method=None, port=None):
"""! Copy file depending on method you want to use. Handles exception
and return code from shell copy commands.
@return Returns result from copy plugin
@details Method which is actually copying image to mbed
"""
# image_path - Where is binary with target's firmware
# Select copy_method
# We override 'default' method with 'shell' method
copy_method = {
None : 'shell',
'default' : 'shell',
}.get(copy_method, copy_method)
result = ht_plugins.call_plugin('CopyMethod',
copy_method,
image_path=image_path,
serial=port,
destination_disk=disk,
target_id=self.target_id,
pooling_timeout=self.pooling_timeout)
return result
def handle_send_break_cmd(port,
disk,
reset_type=None,
baudrate=115200,
timeout=1,
verbose=False):
"""! Resets platforms and prints serial port output
@detail Mix with switch -r RESET_TYPE and -p PORT for versatility
"""
if not reset_type:
reset_type = 'default'
port_config = port.split(':')
if len(port_config) == 2:
# -p COM4:115200
port = port_config[0]
baudrate = int(port_config[1])
elif len(port_config) == 3:
# -p COM4:115200:0.5
port = port_config[0]
baudrate = int(port_config[1])
timeout = float(port_config[2])
if verbose:
print "mbedhtrun: serial port configuration: %s:%s:%s" % (
port, str(baudrate), str(timeout))
try:
serial_port = Serial(port, baudrate=baudrate, timeout=timeout)
except Exception as e:
print "mbedhtrun: %s" % (str(e))
print json.dumps(
{
"port": port,
"disk": disk,
"baudrate": baudrate,
"timeout": timeout,
"reset_type": reset_type,
},
indent=4)
return False
serial_port.flush()
# Reset using one of the plugins
result = host_tests_plugins.call_plugin('ResetMethod',
reset_type,
serial=serial_port,
disk=disk)
if not result:
print "mbedhtrun: reset plugin failed"
print json.dumps(
{
"port": port,
"disk": disk,
"baudrate": baudrate,
"timeout": timeout,
"reset_type": reset_type
},
indent=4)
return False
print "mbedhtrun: serial dump started (use ctrl+c to break)"
try:
while True:
test_output = serial_port.read(512)
if test_output:
sys.stdout.write('%s' % test_output)
if "{end}" in test_output:
if verbose:
print
print "mbedhtrun: stopped (found '{end}' terminator)"
break
except KeyboardInterrupt:
print "ctrl+c break"
serial_port.close()
return True
def handle_send_break_cmd(port,
disk,
reset_type=None,
baudrate=115200,
timeout=1,
verbose=False):
"""! Resets platforms and prints serial port output
@detail Mix with switch -r RESET_TYPE and -p PORT for versatility
"""
if not reset_type:
reset_type = 'default'
port_config = port.split(':')
if len(port_config) == 2:
# -p COM4:115200
port = port_config[0]
baudrate = int(port_config[1])
elif len(port_config) == 3:
# -p COM4:115200:0.5
port = port_config[0]
baudrate = int(port_config[1])
timeout = float(port_config[2])
if verbose:
print "mbedhtrun: serial port configuration: %s:%s:%s"% (port, str(baudrate), str(timeout))
try:
serial_port = Serial(port, baudrate=baudrate, timeout=timeout)
except Exception as e:
print "mbedhtrun: %s" % (str(e))
print json.dumps({
"port" : port,
"disk" : disk,
"baudrate" : baudrate,
"timeout" : timeout,
"reset_type" : reset_type,
}, indent=4)
return False
serial_port.flush()
# Reset using one of the plugins
result = host_tests_plugins.call_plugin('ResetMethod', reset_type, serial=serial_port, disk=disk)
if not result:
print "mbedhtrun: reset plugin failed"
print json.dumps({
"port" : port,
"disk" : disk,
"baudrate" : baudrate,
"timeout" : timeout,
"reset_type" : reset_type
}, indent=4)
return False
print "mbedhtrun: serial dump started (use ctrl+c to break)"
try:
while True:
test_output = serial_port.read(512)
if test_output:
sys.stdout.write('%s'% test_output)
if "{end}" in test_output:
if verbose:
print
print "mbedhtrun: stopped (found '{end}' terminator)"
break
except KeyboardInterrupt:
print "ctrl+c break"
serial_port.close()
return True
