def mea_dataFromSensor(data):
fn_name= __name__ + "/" + str(sys._getframe().f_code.co_name)
# verbose(9, fn_name, "data=", data)
try:
id_actuator=data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
serial_data=data["data"]
except:
return False
try:
s=serial_data.decode('latin-1')
except:
return False
mem_actuator=mea.getMemory(id_actuator)
# verbose(9, fn_name, "mem_actuator=", mem_actuator)
if not 'msg' in mem_actuator or mem_actuator['msg']==False:
return True
now=int(round(time() * 1000))
if 'chrono' in mem_actuator and mem_actuator['chrono'] <> False:
if now - mem_actuator['chrono'] < 5000:
if s.find(u"\r\n> ") >=0:
mea.sendSerialData(data['fd'], bytearray(mem_actuator['msg']+"\r\n"+chr(26)))
mem_actuator['msg']==False
mem_actuator['chrono']=False
else:
mem_actuator['chrono']=False
mem_actuator['msg']==False
def mea_xplCmndMsg(data):
fn_name = str(sys._getframe().f_code.co_name) + "/" + __name__
verbose(9, fn_name, " data=", data)
try:
id_actuator = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
mem_actuator = mea.getMemory(id_actuator)
verbose(9, fn_name, " mem_actuator=", mem_actuator)
# premier passage, pas encore de msg
if not 'chrono' in mem_actuator or not 'msg' in mem_actuator:
mem_actuator['chrono'] = False
mem_actuator['msg'] = False
# le dernier message n'a pas encore été envoyé après 5 secondes
if mem_actuator['chrono'] != False:
now = int(round(time() * 1000))
if now - mem_actuator['chrono'] > 5000:
mem_actuator['chrono'] = False
mem_actuator['msg'] = False
if mem_actuator['msg'] != False and mem_actuator[
'chrono'] != False: # un sms est déjà en cours d'envoi, on ne peut traiter qu'un seul à la fois
return False
# récupération des données xpl
try:
x = data["xplmsg"]
body = x["body"]
schema = x["schema"]
except:
return False
if schema == "sendmsg.basic":
try:
msg = str(body["body"])
to = str(body["to"])
except:
verbose(2, "ERROR - (", fn_name, ") : bad data")
return False
mea.sendSerialData(data['fd'], bytearray("AT+CMGS=\"" + to + "\"\r\n"))
mem_actuator['msg'] = msg
mem_actuator['chrono'] = int(round(time() * 1000))
return True
else:
return False
return False
def mea_xplCmndMsg(data):
fn_name=str(sys._getframe().f_code.co_name) + "/" + __name__
verbose(9, fn_name," data=",data)
try:
id_actuator=data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
mem_actuator=mea.getMemory(id_actuator)
verbose(9, fn_name," mem_actuator=",mem_actuator)
# premier passage, pas encore de msg
if not 'chrono' in mem_actuator or not 'msg' in mem_actuator:
mem_actuator['chrono']=False
mem_actuator['msg']=False
# le dernier message n'a pas encore été envoyé après 5 secondes
if mem_actuator['chrono']<>False:
now=int(round(time() * 1000))
if now - mem_actuator['chrono'] > 5000:
mem_actuator['chrono']=False
mem_actuator['msg']=False
if mem_actuator['msg']!=False and mem_actuator['chrono']!=False: # un sms est déjà en cours d'envoi, on ne peut traiter qu'un seul à la fois
return False
# récupération des données xpl
try:
x=data["xplmsg"]
body=x["body"]
schema=x["schema"]
except:
return False
if schema=="sendmsg.basic":
try:
msg=str(body["body"])
to=str(body["to"])
except:
verbose(2, "ERROR - (", fn_name, ") : bad data")
return False
mea.sendSerialData(data['fd'], bytearray("AT+CMGS=\""+to+"\"\r\n"))
mem_actuator['msg']= msg
mem_actuator['chrono']=int(round(time() * 1000))
return True
else:
return False
return False
def mea_dataFromSensor(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
# verbose(9, fn_name, "data=", data)
try:
id_actuator = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
serial_data = data["data"]
except:
return False
try:
s = serial_data.decode('latin-1')
except:
return False
mem_actuator = mea.getMemory(id_actuator)
# verbose(9, fn_name, "mem_actuator=", mem_actuator)
if not 'msg' in mem_actuator or mem_actuator['msg'] == False:
return True
now = int(round(time() * 1000))
if 'chrono' in mem_actuator and mem_actuator['chrono'] != False:
if now - mem_actuator['chrono'] < 5000:
if s.find(u"\r\n> ") >= 0:
mea.sendSerialData(
data['fd'],
bytearray(mem_actuator['msg'] + "\r\n" + chr(26)))
mem_actuator['msg'] == False
mem_actuator['chrono'] = False
else:
mem_actuator['chrono'] = False
mem_actuator['msg'] == False
def mea_xplCmndMsg(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
id_actuator = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
except:
verbose(2, "ERROR (", fn_name, ") - parameters error")
return False
mem_actuator = mea.getMemory(id_actuator)
mem_interface = mea.getMemory("interface" + str(interface_id))
# validation du parametre
pin = 0
if "pin" in params:
pin = params["pin"]
else:
verbose(9, "DEBUG (", fn_name, ") - parameters error : no pin")
return False
if len(pin) != 2:
verbose(2, "ERROR (", fn_name, ") - PIN parameter error")
return False
if pin[0] != 'l' and pin[0] != 'a':
verbose(2, "ERROR (", fn_name, ") - PIN type error")
return False
else:
pinType = pin[0]
if pin[1] < '0' or pin[1] > '9':
verbose(2, "ERROR (", fn_name, ") - PIN id error")
return False
else:
pinNum = int(pin[1])
# validation du message xpl
try:
x = data["xplmsg"]
schema = x["schema"]
msgtype = x["msgtype"]
body = x["body"]
device = body["device"]
except:
verbose(2, "ERROR (", fn_name, ") - no or incomplet xpl message error")
return False
if msgtype != "xpl-cmnd":
verbose(9, data)
return False
current = False
request = False
if "current" in body:
current = body["current"]
elif "request" in body:
request = body["request"]
else:
verbose(2, "ERROR (", fn_name,
") - no \"current\" or \"request\" in message body")
return False
# préparation de la commande
_cmnd = str(pinNum) + ","
if schema == "control.basic" and typeoftype == 1:
if current == False:
verbose(2, "ERROR (", fn_name,
") - no \"current\" in message body")
return False
try:
type = body["type"]
except:
verbose(2, "ERROR (", fn_name, ") - no \"type\" in message body")
return False
if (pinNum == 0 or pinNum == 3):
verbose(2, "ERROR (", fn_name, ") - PIN 0 and 3 are input only")
return False
if type == "output" and pinType == 'l':
if current == "pulse":
if "data1" in body:
data1 = body["data1"]
if not data1.isdigit():
verbose(2, "ERROR (", fn_name,
") - data1 not numeric value")
return False
data1 = int(data1)
else:
data1 = 200
_cmnd = _cmnd + "P," + str(data1)
elif current == "high" or (current.isdigit()
and int(current) == 1):
_cmnd = _cmnd + "L,H"
elif current == "low" or (current.isdigit() and int(current) == 0):
_cmnd = _cmnd + "L,L"
elif type == "variable" and pinType == 'a':
if pinNum != 1 and pinNum != 2:
verbose(
2, "ERROR (", fn_name,
") - Analog output(PWM) only available on pin 1 and 2")
return False
else:
value = 0
if 'current' in mem_interface[pinNum]:
value = mem_interface[pinNum]['current']
if current == "dec":
value = value - 1
elif current == "inc":
value = value + 1
elif current[0] == '-' or current[0] == '+':
if current[1:].isdigit():
value = int(current)
else:
verbose(2, "ERROR (", fn_name,
") - analog value error (", current, ")")
return False
elif current.isdigit():
value = int(current)
else:
verbose(2, "ERROR (", fn_name, ") - analog value error (",
current, ")")
return False
if value < 0:
value = 0
if value > 255:
value = 255
_cmnd = _cmnd + "A," + str(value)
else:
verbose(2, "ERROR (", fn_name, ") - xpl command error")
return False
elif schema == "sensor.basic":
if request == False:
verbose(2, "ERROR (", fn_name,
") - no \"request\" in message body")
return False
if request != "current":
verbose(2, "ERROR (", fn_name, ") - xpl error request!=current")
return False
if typeoftype == 0:
if pinType == 'a' and pinNum < 4:
verbose(2, "ERROR (", fn_name,
") - Analog input only available on pin 4 to pin 9")
return False
_cmnd = _cmnd + pinType.upper() + ",G"
else:
_cmnd = False
# interrogation de l'état d'une sortie, on récupére de l'info aux niveaux de l'interface si dispo
if not "current" in mem_interface[pinNum]:
return False
current_value = mem_interface[pinNum]["current"]
if pinType == 'l':
if current_value == 0:
current_value = "low"
else:
current_value = "high"
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor",
"basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", current_value)
mea.xplSendMsg(xplMsg)
return True
else:
verbose(9, data)
verbose(2, "ERROR (", fn_name,
") - xpl schema incompatible with sensor/actuator (", schema,
")")
return False
if _cmnd != False:
cmnd = "~~~~CMD:##" + _cmnd + "##\r\nEND\r\n"
# verbose(9, cmnd)
mea.sendSerialData(data['fd'], bytearray(cmnd))
return True
def mea_xplCmndMsg(data):
fn_name = __name__ + "/" + str(sys._getframe().f_code.co_name)
try:
id_actuator = data["device_id"]
except:
verbose(2, "ERROR (", fn_name, ") - device_id not found")
return False
try:
device_name = data["device_name"]
interface_id = data["interface_id"]
parameters = data["device_parameters"]
parameters = parameters.strip().lower()
params = mea_utils.parseKeyValueDatasToDictionary(parameters, ",", ":")
typeoftype = data["typeoftype"]
except:
verbose(2, "ERROR (", fn_name, ") - parameters error")
return False
mem_actuator = mea.getMemory(id_actuator)
mem_interface = mea.getMemory("interface" + str(interface_id))
# validation du parametre
pin = 0
if "pin" in params:
pin = params["pin"]
else:
verbose(9, "DEBUG (", fn_name, ") - parameters error : no pin")
return False
if len(pin) != 2:
verbose(2, "ERROR (", fn_name, ") - PIN parameter error")
return False
if pin[0] != "l" and pin[0] != "a":
verbose(2, "ERROR (", fn_name, ") - PIN type error")
return False
else:
pinType = pin[0]
if pin[1] < "0" or pin[1] > "9":
verbose(2, "ERROR (", fn_name, ") - PIN id error")
return False
else:
pinNum = int(pin[1])
# validation du message xpl
try:
x = data["xplmsg"]
schema = x["schema"]
msgtype = x["msgtype"]
body = x["body"]
device = body["device"]
except:
verbose(2, "ERROR (", fn_name, ") - no or incomplet xpl message error")
return False
if msgtype != "xpl-cmnd":
verbose(9, data)
return False
current = False
request = False
if "current" in body:
current = body["current"]
elif "request" in body:
request = body["request"]
else:
verbose(2, "ERROR (", fn_name, ') - no "current" or "request" in message body')
return False
# préparation de la commande
_cmnd = str(pinNum) + ","
if schema == "control.basic" and typeoftype == 1:
if current == False:
verbose(2, "ERROR (", fn_name, ') - no "current" in message body')
return False
try:
type = body["type"]
except:
verbose(2, "ERROR (", fn_name, ') - no "type" in message body')
return False
if pinNum == 0 or pinNum == 3:
verbose(2, "ERROR (", fn_name, ") - PIN 0 and 3 are input only")
return False
if type == "output" and pinType == "l":
if current == "pulse":
if "data1" in body:
data1 = body["data1"]
if not data1.isdigit():
verbose(2, "ERROR (", fn_name, ") - data1 not numeric value")
return False
data1 = int(data1)
else:
data1 = 200
_cmnd = _cmnd + "P," + str(data1)
elif current == "high" or (current.isdigit() and int(current) == 1):
_cmnd = _cmnd + "L,H"
elif current == "low" or (current.isdigit() and int(current) == 0):
_cmnd = _cmnd + "L,L"
elif type == "variable" and pinType == "a":
if pinNum != 1 and pinNum != 2:
verbose(2, "ERROR (", fn_name, ") - Analog output(PWM) only available on pin 1 and 2")
return False
else:
value = 0
if "current" in mem_interface[pinNum]:
value = mem_interface[pinNum]["current"]
if current == "dec":
value = value - 1
elif current == "inc":
value = value + 1
elif current[0] == "-" or current[0] == "+":
if current[1:].isdigit():
value = int(current)
else:
verbose(2, "ERROR (", fn_name, ") - analog value error (", current, ")")
return False
elif current.isdigit():
value = int(current)
else:
verbose(2, "ERROR (", fn_name, ") - analog value error (", current, ")")
return False
if value < 0:
value = 0
if value > 255:
value = 255
_cmnd = _cmnd + "A," + str(value)
else:
verbose(2, "ERROR (", fn_name, ") - xpl command error")
return False
elif schema == "sensor.basic":
if request == False:
verbose(2, "ERROR (", fn_name, ') - no "request" in message body')
return False
if request != "current":
verbose(2, "ERROR (", fn_name, ") - xpl error request!=current")
return False
if typeoftype == 0:
if pinType == "a" and pinNum < 4:
verbose(2, "ERROR (", fn_name, ") - Analog input only available on pin 4 to pin 9")
return False
_cmnd = _cmnd + pinType.upper() + ",G"
else:
_cmnd = False
# interrogation de l'état d'une sortie, on récupére de l'info aux niveaux de l'interface si dispo
if not "current" in mem_interface[pinNum]:
return False
current_value = mem_interface[pinNum]["current"]
if pinType == "l":
if current_value == 0:
current_value = "low"
else:
current_value = "high"
xplMsg = mea_utils.xplMsgNew("me", "*", "xpl-trig", "sensor", "basic")
mea_utils.xplMsgAddValue(xplMsg, "device", device_name)
mea_utils.xplMsgAddValue(xplMsg, "current", current_value)
mea.xplSendMsg(xplMsg)
return True
else:
verbose(9, data)
verbose(2, "ERROR (", fn_name, ") - xpl schema incompatible with sensor/actuator (", schema, ")")
return False
if _cmnd != False:
cmnd = "~~~~CMD:##" + _cmnd + "##\r\nEND\r\n"
# verbose(9, cmnd)
mea.sendSerialData(data["fd"], bytearray(cmnd))
return True