def topology(): "Create a network." net = Mininet( controller=RemoteController, link=TCLink, switch=OVSKernelSwitch ) sta = [] print "*** Creating nodes" for n in range(10): sta.append(n) sta[n] = net.addStation( 'sta%s' % (n+1), wlans=2, mac='00:00:00:00:00:%s' % (n+1), ip='192.168.0.%s/24' % (n+1) ) phyap1 = net.addPhysicalBaseStation( 'phyap1', ssid= 'SBRC16-MininetWiFi', mode= 'g', channel= '1', position='50,115,0', wlan='wlan11' ) sta11 = net.addStation( 'sta11', ip='10.0.0.111/8', position='120,200,0') ap2 = net.addBaseStation( 'ap2', ssid= 'ap2', mode= 'g', channel= '11', position='100,175,0' ) ap3 = net.addBaseStation( 'ap3', ssid= 'ap3', mode= 'g', channel= '6', position='150,50,0' ) ap4 = net.addBaseStation( 'ap4', ssid= 'ap4', mode= 'g', channel= '1', position='175,150,0' ) c1 = net.addController( 'c1', controller=Controller, port=6653 ) root = Node( 'root', inNamespace=False ) print "*** Creating links" for station in sta: net.addMesh(station, ssid='meshNet') """uncomment to plot graph""" net.plotGraph(max_x=240, max_y=240) """Routing""" net.meshRouting('custom') """Seed""" net.seed(20) print "*** Associating and Creating links" net.addLink(phyap1, ap2) net.addLink(ap2, ap3) net.addLink(ap3, ap4) print "*** Starting network" net.build() c1.start() phyap1.start( [c1] ) ap2.start( [c1] ) ap3.start( [c1] ) ap4.start( [c1] ) ip = 201 for station in sta: station.cmd('ifconfig %s-wlan1 10.0.0.%s/8' % (station, ip)) ip+=1 "*** Available models: RandomWalk, TruncatedLevyWalk, RandomDirection, RandomWayPoint, GaussMarkov, ReferencePoint, TimeVariantCommunity ***" net.startMobility(startTime=0, model='RandomWalk', max_x=200, max_y=220, min_v=0.1, max_v=0.2) print "*** Running CLI" CLI( net ) print "*** Stopping network" net.stop()
def topology(): "Create a network." net = Mininet( controller=RemoteController, link=TCLink, switch=OVSKernelSwitch ) staList = [] print "*** Creating nodes" for n in range(10): staList.append(n) staList[n] = net.addStation( 'sta%s' % (n+1), wlans=2, mac='00:00:00:00:00:%s' % (n+1), ip='192.168.0.%s/24' % (n+1) ) phyap1 = net.addPhysicalBaseStation( 'phyap1', ssid= 'SBRC16-MininetWiFi', mode= 'g', channel= '1', position='50,115,0', phywlan='wlan11' ) sta11 = net.addStation( 'sta11', ip='10.0.0.111/8', position='120,200,0') ap2 = net.addAccessPoint( 'ap2', ssid= 'ap2', mode= 'g', channel= '11', position='100,175,0' ) ap3 = net.addAccessPoint( 'ap3', ssid= 'ap3', mode= 'g', channel= '6', position='150,50,0' ) ap4 = net.addAccessPoint( 'ap4', ssid= 'ap4', mode= 'g', channel= '1', position='175,150,0' ) c1 = net.addController( 'c1', controller=Controller, port=6653 ) root = Node( 'root', inNamespace=False ) print "*** Configuring wifi nodes" net.configureWifiNodes() """uncomment to plot graph""" net.plotGraph(max_x=240, max_y=240) """Routing""" net.meshRouting('custom') """Seed""" net.seed(20) print "*** Associating and Creating links" for sta in staList: net.addMesh(sta, ssid='meshNet') net.addLink(phyap1, ap2) net.addLink(ap2, ap3) net.addLink(ap3, ap4) print "*** Starting network" net.build() c1.start() phyap1.start( [c1] ) ap2.start( [c1] ) ap3.start( [c1] ) ap4.start( [c1] ) ip = 201 for sta in staList: sta.setIP('10.0.0.%s/8' % ip, intf="%s-wlan1" % sta) ip+=1 "*** Available models: RandomWalk, TruncatedLevyWalk, RandomDirection, RandomWayPoint, GaussMarkov, ReferencePoint, TimeVariantCommunity ***" net.startMobility(startTime=0, model='RandomWalk', max_x=200, max_y=220, min_v=0.1, max_v=0.2) print "*** Running CLI" CLI( net ) print "*** Stopping network" net.stop()
def topology(): "Create a network." net = Mininet( controller=RemoteController, accessPoint=UserAP, enable_wmediumd=True, enable_interference=True ) staList = [] internetIface = 'enp2s0' usbDongleIface = 'wlan2' print "*** Creating nodes" for n in range(10): staList.append(n) staList[n] = net.addStation( 'sta%s' % (n+1), wlans=2, mac='00:00:00:00:00:' + '%02x' % (n+1), ip='192.168.0.%s/24' % (n+1)) phyap1 = net.addPhysicalBaseStation( 'phyap1', wlans=2, protocols='OpenFlow13', ssid='Sigcomm-2016-Mininet-WiFi,Sigcomm-2016-Mininet-WiFi', mode='g', channel='1', position='50,115,0', phywlan=usbDongleIface) ap2 = net.addAccessPoint( 'ap2', protocols='OpenFlow13', ssid='ap-ssid2', mode='g', channel='11', position='100,175,0' ) ap3 = net.addAccessPoint( 'ap3', protocols='OpenFlow13', ssid='ap-ssid3', mode='g', channel='6', position='150,115,0' ) ap4 = net.addAccessPoint( 'ap4', protocols='OpenFlow13', ssid='ap-ssid4', mode='g', channel='11', position='100,55,0' ) c5 = net.addController( 'c5', controller=RemoteController, port=6653 ) sta11 = net.addStation( 'sta11', ip='10.0.0.111/8', position='60,100,0') h12 = net.addHost( 'h12', ip='10.0.0.109/8') root = net.addHost( 'root', ip='10.0.0.254/8', inNamespace=False ) print "*** Configuring Propagation Model" net.propagationModel(model="logDistance", exp=4) print "*** Configuring wifi nodes" net.configureWifiNodes() print "*** Creating links" for sta in staList: net.addMesh(sta, ssid='meshNet') net.plotGraph(max_x=240, max_y=240) "Seed" net.seed(20) print "*** Associating and Creating links" net.addLink(phyap1, ap2) net.addLink(ap2, ap3) net.addLink(sta11, phyap1, 0, 1) net.addLink(ap3, ap4) net.addLink(ap4, phyap1) net.addLink(root, ap3) net.addLink(phyap1, h12) print "*** Starting network" net.build() c5.start() phyap1.start( [c5] ) ap2.start( [c5] ) ap3.start( [c5] ) ap4.start( [c5] ) time.sleep(2) 'output=all,flood' ap3.cmd('dpctl unix:/tmp/ap3 meter-mod cmd=add,flags=1,meter=1 drop:rate=100') ap3.cmd('dpctl unix:/tmp/ap3 flow-mod table=0,cmd=add in_port=4,eth_type=0x800,ip_dst=10.0.0.100,meter:1 apply:output=flood') phyap1.cmd('dpctl unix:/tmp/phyap1 flow-mod table=0,cmd=add in_port=2,ip_dst=10.0.0.109,eth_type=0x800,ip_proto=6,tcp_dst=80 apply:set_field=tcp_dst:80,set_field=ip_dst:10.0.0.111,output=5') phyap1.cmd('dpctl unix:/tmp/phyap1 flow-mod table=0,cmd=add in_port=1,eth_type=0x800,ip_proto=6,tcp_src=80 apply:set_field=ip_src:10.0.0.109,output=2') fixNetworkManager( root, 'root-eth0' ) startNAT(root, internetIface) sta11.cmd('ip route add default via 10.0.0.254') sta11.cmd('pushd /home/fontes; python3 -m http.server 80 &') ip = 201 for sta in staList: sta.setIP('10.0.0.%s/8' % ip, intf="%s-wlan1" % sta) sta.cmd('ip route add default via 10.0.0.254') ip+=1 net.startMobility(startTime=0, model='RandomWalk', max_x=200, max_y=200, min_v=0.1, max_v=0.2) print "*** Running CLI" CLI( net ) print "*** Stopping network" net.stop()
def topology(): "Create a network." net = Mininet(controller=RemoteController, accessPoint=OVSKernelAP, enable_wmediumd=True, enable_interference=True) staList = [] print("*** Creating nodes") for n in range(10): staList.append(n) staList[n] = net.addStation('sta%s' % (n + 1), wlans=2, mac='00:00:00:00:00:' + '%02x' % (n + 1), ip='192.168.0.%s/24' % (n + 1)) phyap1 = net.addPhysicalBaseStation( 'phyap1', ssid='SBRC16-MininetWiFi,SBRC16-MininetWiFi', mode='g', channel='1', wlans=2, position='50,115,0', phywlan='wlan2') net.addStation('sta11', ip='10.0.0.111/8', position='120,200,0') ap2 = net.addAccessPoint('ap2', ssid='ap2', mode='g', channel='11', position='100,175,0') ap3 = net.addAccessPoint('ap3', ssid='ap3', mode='g', channel='6', position='150,50,0') ap4 = net.addAccessPoint('ap4', ssid='ap4', mode='g', channel='1', position='175,150,0') c1 = net.addController('c1', controller=Controller, port=6653) Node('root', inNamespace=False) net.propagationModel(model="logDistance", exp=4) print("*** Configuring wifi nodes") net.configureWifiNodes() 'plotting graph' net.plotGraph(max_x=220, max_y=220) 'Seed' net.seed(20) print("*** Associating and Creating links") for sta in staList: net.addMesh(sta, ssid='meshNet') net.addLink(phyap1, ap2) net.addLink(ap2, ap3) net.addLink(ap3, ap4) net.startMobility(time=0, model='RandomWalk', max_x=220, max_y=220, min_v=0.1, max_v=0.2) print("*** Starting network") net.build() c1.start() phyap1.start([c1]) ap2.start([c1]) ap3.start([c1]) ap4.start([c1]) ip = 201 for sta in staList: sta.setIP('10.0.0.%s/8' % ip, intf="%s-wlan1" % sta) ip += 1 print("*** Running CLI") CLI(net) print("*** Stopping network") net.stop()
def topology(): "Create a network." net = Mininet(controller=RemoteController, link=TCLink, switch=UserSwitch) staList = [] print "*** Creating nodes" for n in range(10): staList.append(n) staList[n] = net.addStation('sta%s' % (n + 1), wlans=2, mac='00:00:00:00:00:%s' % (n + 1), ip='192.168.0.%s/24' % (n + 1)) phyap1 = net.addPhysicalBaseStation('phyap1', protocols='OpenFlow13', ssid='ap-ssid1', mode='g', channel='1', position='50,115,0', phywlan='wlan1') ap2 = net.addBaseStation('ap2', protocols='OpenFlow13', ssid='ap-ssid2', mode='g', channel='11', position='100,175,0') ap3 = net.addBaseStation('ap3', protocols='OpenFlow13', ssid='ap-ssid3', mode='g', channel='6', position='150,115,0') ap4 = net.addBaseStation('ap4', protocols='OpenFlow13', ssid='ap-ssid4', mode='g', channel='6', position='100,55,0') sta11 = net.addStation('sta11', ip='10.0.0.111/8', position='120,200,0') c1 = net.addController('c1', controller=RemoteController, port=6653) root = Node('root', inNamespace=False) print "*** Creating links" for sta in staList: net.addMesh(sta, ssid='meshNet') """uncomment to plot graph""" net.plotGraph(max_x=240, max_y=240) """Routing""" net.meshRouting('custom') """Seed""" net.seed(20) print "*** Associating and Creating links" net.addLink(phyap1, ap2) net.addLink(ap2, ap3) net.addLink(sta11, ap2) net.addLink(ap3, ap4) net.addLink(ap4, phyap1) link = net.addLink(root, ap3) link.intf1.setIP('10.254', 8) """Adding datapath""" net.addOfDataPath('ap3', 'wlan0') print "*** Starting network" net.build() c1.start() phyap1.start([c1]) ap2.start([c1]) ap3.start([c1]) ap4.start([c1]) time.sleep(2) """output=all,flood""" ap3.cmd( 'dpctl unix:/tmp/ap3 meter-mod cmd=add,flags=1,meter=1 drop:rate=100') ap3.cmd( 'dpctl unix:/tmp/ap3 flow-mod table=0,cmd=add in_port=4,eth_type=0x800,ip_dst=10.0.0.100, meter:1 apply:output=flood' ) startNAT(root) sta11.cmd('ip route add default via 10.0.0.254') sta11.cmd('pushd /homt/alpha; python3 -m http.server 80 &') ip = 201 for sta in staList: sta.setIP('10.0.0.%s/8' % ip, intf="%s-wlan1" % sta) sta.cmd('ip route add default via 10.0.0.254') ip += 1 "*** Available models: RandomWalk, TruncatedLevyWalk, RandomDirection, RandomWayPoint, GaussMarkov, ReferencePoint, TimeVariantCommunity ***" net.startMobility(startTime=0, model='RandomWalk', max_x=200, max_y=220, min_v=0.1, max_v=0.2) print "*** Running CLI" CLI(net) print "*** Stopping network" net.stop()
def topology(): "Create a network." net = Mininet( controller=RemoteController, link=TCLink, switch=UserSwitch ) staList = [] internetIface = 'eth0' usbDongleIface = 'wlan0' print "*** Creating nodes" for n in range(10): staList.append(n) staList[n] = net.addStation( 'sta%s' % (n+1), wlans=2, mac='00:00:00:00:00:%s' % (n+1), ip='192.168.0.%s/24' % (n+1) ) phyap1 = net.addPhysicalBaseStation( 'phyap1', protocols='OpenFlow13', ssid='Sigcomm-2016-Mininet-WiFi', mode= 'g', channel= '1', position='50,115,0', phywlan=usbDongleIface ) ap2 = net.addBaseStation( 'ap2', protocols='OpenFlow13', ssid='ap-ssid2', mode= 'g', channel= '11', position='100,175,0' ) ap3 = net.addBaseStation( 'ap3', protocols='OpenFlow13', ssid='ap-ssid3', mode= 'g', channel= '6', position='150,115,0' ) ap4 = net.addBaseStation( 'ap4', protocols='OpenFlow13', ssid='ap-ssid4', mode= 'g', channel= '11', position='100,55,0' ) c5 = net.addController( 'c5', controller=RemoteController, port=6653 ) sta11 = net.addStation( 'sta11', ip='10.0.0.111/8', position='60,100,0') h12 = net.addHost( 'h12', ip='10.0.0.109/8') root = net.addHost( 'root', ip='10.0.0.254/8', inNamespace=False ) print "*** Creating links" for sta in staList: net.addMesh(sta, ssid='meshNet') """uncomment to plot graph""" net.plotGraph(max_x=240, max_y=240) """Routing""" net.meshRouting('custom') """Seed""" net.seed(20) print "*** Associating and Creating links" net.addLink(phyap1, ap2) net.addLink(ap2, ap3) net.addLink(sta11, ap2) net.addLink(ap3, ap4) net.addLink(ap4, phyap1) net.addLink(root, ap3) net.addLink(phyap1, h12) print "*** Starting network" net.build() c5.start() phyap1.start( [c5] ) ap2.start( [c5] ) ap3.start( [c5] ) ap4.start( [c5] ) time.sleep(2) """output=all,flood""" ap3.cmd('dpctl unix:/tmp/ap3 meter-mod cmd=add,flags=1,meter=1 drop:rate=100') ap3.cmd('dpctl unix:/tmp/ap3 flow-mod table=0,cmd=add in_port=4,eth_type=0x800,ip_dst=10.0.0.100,meter:1 apply:output=flood') phyap1.cmd('dpctl unix:/tmp/phyap1 flow-mod table=0,cmd=add in_port=2,ip_dst=10.0.0.109,eth_type=0x800,ip_proto=6,tcp_dst=80 apply:set_field=tcp_dst:80,set_field=ip_dst:10.0.0.111,output=5') phyap1.cmd('dpctl unix:/tmp/phyap1 flow-mod table=0,cmd=add in_port=1,eth_type=0x800,ip_proto=6,tcp_src=80 apply:set_field=ip_src:10.0.0.109,output=2') fixNetworkManager( root, 'root-eth0' ) startNAT(root, internetIface) sta11.cmd('ip route add default via 10.0.0.254') sta11.cmd('pushd /home/fontes; python3 -m http.server 80 &') ip = 201 for sta in staList: sta.setIP('10.0.0.%s/8' % ip, intf="%s-wlan1" % sta) sta.cmd('ip route add default via 10.0.0.254') ip+=1 "*** Available models: RandomWalk, TruncatedLevyWalk, RandomDirection, RandomWayPoint, GaussMarkov, ReferencePoint, TimeVariantCommunity ***" net.startMobility(startTime=0, model='RandomWalk', max_x=200, max_y=200, min_v=0.1, max_v=0.2) print "*** Running CLI" CLI( net ) print "*** Stopping network" net.stop()
def topology(): "Create a network." net = Mininet( controller=RemoteController, link=TCLink, switch=UserSwitch ) sta = [] print "*** Creating nodes" for n in range(10): sta.append(n) sta[n] = net.addStation( 'sta%s' % (n+1), wlans=2, mac='00:00:00:00:00:%s' % (n+1), ip='192.168.0.%s/24' % (n+1) ) phyap1 = net.addPhysicalBaseStation( 'phyap1', protocols='OpenFlow13', ssid= 'ap-ssid1', mode= 'g', channel= '1', position='50,115,0', wlan='wlan11' ) ap2 = net.addBaseStation( 'ap2', protocols='OpenFlow13', ssid= 'ap-ssid2', mode= 'g', channel= '11', position='100,175,0' ) ap3 = net.addBaseStation( 'ap3', protocols='OpenFlow13', ssid= 'ap-ssid3', mode= 'g', channel= '6', position='150,115,0' ) ap4 = net.addBaseStation( 'ap4', protocols='OpenFlow13', ssid= 'ap-ssid4', mode= 'g', channel= '6', position='100,55,0' ) sta11 = net.addStation( 'sta11', ip='10.0.0.111/8', position='120,200,0') c1 = net.addController( 'c1', controller=RemoteController, port=6653 ) root = Node( 'root', inNamespace=False ) print "*** Creating links" for station in sta: net.addMesh(station, ssid='meshNet') """uncomment to plot graph""" net.plotGraph(max_x=240, max_y=240) """Routing""" net.meshRouting('custom') """Seed""" net.seed(20) print "*** Associating and Creating links" net.addLink(phyap1, ap2) net.addLink(ap2, ap3) net.addLink(sta11, ap2) net.addLink(ap3, ap4) net.addLink(ap4, phyap1) link = net.addLink( root, ap3 ) link.intf1.setIP( '10.254', 8 ) """Adding datapath""" net.addOfDataPath('ap3', 'wlan0') print "*** Starting network" net.build() c1.start() phyap1.start( [c1] ) ap2.start( [c1] ) ap3.start( [c1] ) ap4.start( [c1] ) time.sleep(2) """output=all,flood""" ap3.cmd('dpctl unix:/tmp/ap3 meter-mod cmd=add,flags=1,meter=1 drop:rate=100') ap3.cmd('dpctl unix:/tmp/ap3 flow-mod table=0,cmd=add in_port=4,eth_type=0x800,ip_dst=10.0.0.100, meter:1 apply:output=flood') startNAT( root ) sta11.cmd('ip route add default via 10.0.0.254') sta11.cmd('pushd /homt/alpha; python3 -m http.server 80 &') ip = 201 for station in sta: station.cmd('ifconfig %s-wlan1 10.0.0.%s/8' % (station, ip)) station.cmd('ip route add default via 10.0.0.254') ip+=1 "*** Available models: RandomWalk, TruncatedLevyWalk, RandomDirection, RandomWayPoint, GaussMarkov, ReferencePoint, TimeVariantCommunity ***" net.startMobility(startTime=0, model='RandomWalk', max_x=200, max_y=220, min_v=0.1, max_v=0.2) print "*** Running CLI" CLI( net ) print "*** Stopping network" net.stop()
def topology(): "Create a network." net = Mininet(controller=RemoteController, link=TCLink, switch=OVSKernelSwitch) sta = [] print "*** Creating nodes" for n in range(10): sta.append(n) sta[n] = net.addStation('sta%s' % (n + 1), wlans=2, mac='00:00:00:00:00:%s' % (n + 1), ip='192.168.0.%s/24' % (n + 1)) phyap1 = net.addPhysicalBaseStation('phyap1', ssid='ap-ssid1', mode='g', channel='1', position='50,115,0', wlan='wlan11') ap2 = net.addBaseStation('ap2', ssid='ap-ssid2', mode='g', channel='11', position='100,175,0') c1 = net.addController('c1', controller=Controller, port=6653) root = Node('root', inNamespace=False) print "*** Creating links" for station in sta: net.addMesh(station, ssid='meshNet') """uncomment to plot graph""" net.plotGraph(max_x=240, max_y=240) """Routing""" net.meshRouting('custom') """Seed""" net.seed(20) print "*** Associating and Creating links" net.addLink(phyap1, ap2) print "*** Starting network" net.build() c1.start() phyap1.start([c1]) ap2.start([c1]) ip = 201 for station in sta: station.cmd('ifconfig %s-wlan1 10.0.0.%s/8' % (station, ip)) ip += 1 "*** Available models: RandomWalk, TruncatedLevyWalk, RandomDirection, RandomWayPoint, GaussMarkov, ReferencePoint, TimeVariantCommunity ***" net.startMobility(startTime=0, model='RandomWalk', max_x=200, max_y=220, min_v=0.1, max_v=0.2) print "*** Running CLI" CLI(net) print "*** Stopping network" net.stop()