def _init_modbus(self, ):
"""modbusServer初始化
Returns:
server -- server服务器
slave -- 从机
"""
# 钩子
hooks.install_hook('modbus.Slave.handle_write_multiple_registers_request',
self._handle_write_multiple_registers_request)
hooks.install_hook('modbus.Slave.handle_write_single_register_request',
self._handle_write_single_registers_request)
# 初始化
server = modbus_tcp.TcpServer(address='0.0.0.0', port=PORT)
# 服务启动
server.start()
# 建立从机
slave = server.add_slave(SLAVE_ID)
# 建立块
# slave.add_block('0', cst.DISCRETE_INPUTS, 0, 100)
# slave.add_block('0', cst.COILS, 0, 100)
slave.add_block(SYS_ANALOG_INPUTS_BLOCK_NAME, cst.ANALOG_INPUTS, SYS_ANALOG_INPUTS_BLOCK_ADDRESS, 171)
slave.add_block(SYS_HOLDING_REGISTERS_BLOCK_NAME, cst.HOLDING_REGISTERS, SYS_HOLDING_REGISTERS_BLOCK_ADDRESS, 6)
# slave.add_block(HIDDEN_HOLDING_REGISTERS_BLOCK_NAME, cst.HOLDING_REGISTERS, 5999, 20)
return server, slave
def ModSvrFactory(args):
""" modFactory : rtu or tcp server holding several slaves """
logger = logging.getLogger("modbus_tk")
_svr = None
if args[0]=='-tcp':
logger.info("Build TCP Server - {0}:{1}".format(args[2],args[1]))
try :
# remove extra zeros from ip addr
_ip = args[2]
_ip = _ip.split('.')
_ip = str(int(_ip[0])) + "." + str(int(_ip[1])) + "." + str(int(_ip[2])) + "." + str(int(_ip[3]))
_svr = modbus_tcp.TcpServer(int(args[1]), _ip)
except Exception as err:
logger.error("Error while building TCP Server : {0}".format(err))
elif args[0]=='-rtu':
logger.info("Build RTU Server - Port: {0}, Baudrate: {1}, Bytesize: {2}, Parity: {3}, Stopbits : {4}"
.format(args[1],args[2],args[3],args[4],args[5]))
try:
_svr = modbus_rtu.RtuServer(serial.Serial(port=args[1],
baudrate=int(args[2]),
bytesize=int(args[3]),
parity=args[4],
stopbits=float(args[5]),
xonxoff=0))
except Exception as err:
logger.error("Error while building RTU Server : {0}".format(err))
else:
logger.error("Wrong arguments")
return _svr
def testGetRequestLength(self):
"""Test than _get_request_length returns the length field of request mbap"""
s = modbus_tcp.TcpServer()
request = struct.pack(">HHHB", 0, 0, 12, 1)
self.assertEqual(s._get_request_length(request), 12)
request = struct.pack(">HHH", 0, 0, 129)
self.assertEqual(s._get_request_length(request), 129)
def testGetRequestLengthFailsOnInvalid(self):
"""Test than an error is raised in _get_request_length is the length field of request mbap is not filled"""
s = modbus_tcp.TcpServer()
request = struct.pack(">HHB", 0, 0, 1)
self.assertRaises(modbus_tk.modbus.ModbusInvalidRequestError,
s._get_request_length, request)
self.assertRaises(modbus_tk.modbus.ModbusInvalidRequestError,
s._get_request_length, "")
def create_client(self, block_name):
client = modbus_tcp.TcpServer(address=self.host, port=self.port)
client.start()
server = client.add_slave(self.slave)
logger.info('create block_name: %s ,slave: %s ' %
(block_name, self.slave))
# server.add_block(block_name, cst.HOLDING_REGISTERS, self.register, 4)
self.server = server
return self
def start_service(self):
self._running = True
self.threadrx = threading.Thread(target=self.uart_read_thread)
self.threadrx.start()
self.threadtx = threading.Thread(target=self.uart_write_thread)
self.threadtx.start()
self._mdbus = modbus_tcp.TcpServer()
self._mdbus.start()
self._mdbus1 = self._mdbus.add_slave(1)
self._mdbus1.add_block('0', cst.HOLDING_REGISTERS, 0, self._reg_size)
self._slave = self._mdbus.get_slave(1)
logging.info('MODBUS service is started')
def main():
try:
server = modbus_tcp.TcpServer(address='127.0.0.1', port=8502)
server.start()
sistema = PumpSys(server)
while True:
sistema.update()
time.sleep(0.1)
os.system('clear')
finally:
server.stop()
def __init__(self, listen_Address, listen_Port):
##Creates the server
self.server = modbus_tcp.TcpServer(address=listen_Address,
port=listen_Port)
##Creates a slave object
self.slave = self.server.add_slave(255)
##Adding 10 HOLDING_REGISTERS, values = 0
self.slave.add_block('0', cst.HOLDING_REGISTERS, 1, 10)
##Adding 100 COILS, values = 0
#self.slave.add_block('1', cst.COILS, 1, 100)
##Creates socket, bind and listen
self.server._do_init()
print "Sensor_L is running..."
def start(self):
"""Starts modbus' server adapter interface. """
try:
self.tcp_server = modbus_tcp.TcpServer()
self.tcp_server.start()
self.running = True
return self.running
except:
self._logger.error("Some error occurred while \
creating a new tcp_server")
self.tcp_server.stop()
self.running = False
return self.running
def __init__(ad, pt):
"""
设置服务器地址、端口号
启动服务器
设置从机集合
"""
global __logger__
global __server__
global __slaveList__
__logger__ = modbus_tk.utils.create_logger(name="console",
record_format="%(message)s")
__server__ = modbus_tcp.TcpServer(address=ad, port=pt)
__logger__.info("running...")
__logger__.info("enter 'quit' for closing the server")
__server__.start()
__slaveList__ = list()
def __init__(self, options):
self.rtu = None
self.mode = options.mode
if options.mode == 'rtu':
self.rtu = serial.Serial(port=options.serial,
baudrate=options.baud)
# Simulator.__init__(self, modbus_rtu.RtuServer(self.rtu))
Simulator.__init__(self, ModSimRtuServer(self.rtu))
# timeout is too fast for 19200
self.server._serial.timeout = self.server._serial.timeout * 1.5
elif options.mode == 'tcp':
Simulator.__init__(
self, modbus_tcp.TcpServer(address='', port=options.port))
else:
raise ModSimError('Unknown mode: %s' % (options.mode))
self.server.set_verbose(options.verbose)
def __init__(self, Address, Port, option):
##Option 1 is used to create a server instance
if option == 1:
#Create the server
self.server = modbus_tcp.TcpServer(address=Address,port=Port)
#create a slave object
self.slave = self.server.add_slave(255)
#adding 100 HOLDING_REGISTERS, values = 0
self.slave.add_block('0', cst.HOLDING_REGISTERS, 1, 100)
#adding 100 COILS, values = 0
self.slave.add_block('1', cst.COILS, 1, 100)
# create socket, bind and listen
self.server._do_init()
## Option 2 is used to create a client instance
elif option == 2:
self.target_Address=Address
self.target_port=Port
def main():
slaveid = 1
logger = modbus_tk.utils.create_logger(name="console",
record_format="%(message)s")
GPIO.setmode(GPIO.BCM)
GPIO.setup(13, GPIO.OUT, initial=GPIO.HIGH)
try:
# get ip address
gw = os.popen("ip -4 route show default").read().split()
print("gw", gw)
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
# gate is 255.255.255.0
s.connect((gw[2], 0))
ipaddr = s.getsockname()[0]
print("IP:", ipaddr)
s.close()
GPIO.output(13, GPIO.LOW)
time.sleep(1)
server = modbus_tcp.TcpServer(address=ipaddr, port=502)
logger.info("esimtech modbus server running...")
logger.info("enter 'quit' for closing the server")
server.start()
slave_1 = server.add_slave(slaveid)
slave_1.add_block('HOLDING_REGISTERS', cst.HOLDING_REGISTERS, 0, 16)
slave_1.add_block('DISCRETE_INPUTS', cst.DISCRETE_INPUTS, 0, 32)
slave_1.add_block('READ_INPUT_REGISTERS', cst.READ_INPUT_REGISTERS, 0,
11)
slave_1.add_block('COILS', cst.COILS, 0, 32)
pcontroller = modbusserver(server, slaveid)
while True:
if GPIO.input(7) == GPIO.LOW:
pcontroller.sendtomcu()
pcontroller.recvmcu()
time.sleep(0.01)
finally:
server.stop()
GPIO.cleanup()
def sercreate(self, _slaveid, _localip, _port, _fuc):
try:
#Create the server
#server = modbus_tcp.TcpServer(address=_localip,port=_port)
server = modbus_tcp.TcpServer()
logger.info("running...")
#logger.info("enter 'quit' for closing the server")
server.start()
print('server start..')
slave_1 = server.add_slave(_slaveid)
print(_slaveid)
#slave_1.add_block('0', cst.HOLDING_REGISTERS, 0, 100)
slave_1.add_block('0', _fuc, 0, 100)
senreader = Senreader_Thread(1, "Thread-1", server)
senreader.start()
except:
print('server create fail')
def main():
try:
logger = modbus_tk.utils.create_logger(name="console",
record_format="%(message)s")
server = modbus_tcp.TcpServer(
address=os.environ.get('SLAVE_IP', '0.0.0.0'),
port=int(os.environ.get('SLAVE_PORT', '5022')))
server.start()
slaves.create(server, logger)
while True:
try:
time.sleep(1)
except Exception as e:
print(e)
break
finally:
server.stop()
logger.error('Slave stopped.')
def __init__(self):
"""
创建字典存放通讯数据
"""
self.l3_dict = {}
self.wincc_dict = {}
self.car_dict = {}
self.h3u_dict = {}
self.mis_dict = {}
self.modbussever = modbus_tcp.TcpServer(port=local_port) # 初始化mosbus
self.master = modbus_tcp.TcpMaster(host=h3u_host, port=h3u_port)
self.sockt_mis = socket.socket(socket.AF_INET,
socket.SOCK_STREAM) # 初始化
self.snap7client_one = snap7.client.Client() # 1号行车初始化
self.snap7client_two = snap7.client.Client() # 2#行车初始化
self.one_real_sign = 0
self.one_turn_sign = 0
self.one_stop_sign = 0
self.l2_heart_beat = 0
print(111)
def robotComunicate():
logger = modbus_tk.utils.create_logger(name="console",
record_format="%(message)s")
try:
# Create the server
server = modbus_tcp.TcpServer(address="0.0.0.0", port=8080)
# server.set_timeout(5.0)
logger.info("running...")
logger.info("enter 'quit' for closing the server")
server.start()
slave_1 = server.add_slave(1)
slave_1.add_block('A', cst.HOLDING_REGISTERS, 0, 1)
slave_1.set_values('A', 0, 0)
numsOfcom = 0
while numsOfcom < 3:
slave_1.set_values('A', 0, 1) # 改变在地址0处的寄存器的值
print("==========发送" + str(numsOfcom + 1) + "次数据==========")
numsOfcom += 1
time.sleep(1)
slave_1.set_values('A', 0, 2)
finally:
server.stop()
#!/usr/bin/env python
# -*- coding: utf_8 -*-
import modbus_tk
import modbus_tk.modbus_tcp as modbus_tcp
import threading
import modbus_tk.defines as mdef
logger = modbus_tk.utils.create_logger(name="console",
record_format="%(message)s")
server = modbus_tcp.TcpServer()
#creates a slave with id 0
slave1 = server.add_slave(1)
#add 2 blocks of holding registers
slave1.add_block("a", mdef.HOLDING_REGISTERS, 0, 100) #address 0, length 100
slave1.add_block("b", mdef.HOLDING_REGISTERS, 200, 20) #address 200, length 20
#creates another slave with id 5
slave5 = server.add_slave(5)
slave5.add_block("c", mdef.COILS, 0, 100)
slave5.add_block("d", mdef.HOLDING_REGISTERS, 0, 100)
#set the values of registers at address 0
slave1.set_values("a", 0, range(100))
server.start()
def setUp(self):
self.server = modbus_tcp.TcpServer()
self.master = modbus_tcp.TcpMaster()
def _get_server(self):
return modbus_tcp.TcpServer()
def main():
"""main"""
logger = modbus_tk.utils.create_logger(name="console",
record_format="%(message)s")
try:
#Create the server
server = modbus_tcp.TcpServer()
logger.info("running...")
logger.info("enter 'quit' for closing the server")
server.start()
slave_1 = server.add_slave(1)
slave_1.add_block('0', cst.HOLDING_REGISTERS, 0, 100)
while True:
cmd = sys.stdin.readline()
args = cmd.split(' ')
if cmd.find('quit') == 0:
sys.stdout.write('bye-bye\r\n')
break
elif args[0] == 'add_slave':
slave_id = int(args[1])
server.add_slave(slave_id)
sys.stdout.write('done: slave %d added\r\n' % slave_id)
elif args[0] == 'add_block':
slave_id = int(args[1])
name = args[2]
block_type = int(args[3])
starting_address = int(args[4])
length = int(args[5])
slave = server.get_slave(slave_id)
slave.add_block(name, block_type, starting_address, length)
sys.stdout.write('done: block %s added\r\n' % name)
elif args[0] == 'set_values':
slave_id = int(args[1])
name = args[2]
address = int(args[3])
values = []
for val in args[4:]:
values.append(int(val))
slave = server.get_slave(slave_id)
slave.set_values(name, address, values)
values = slave.get_values(name, address, len(values))
sys.stdout.write('done: values written: %s\r\n' % str(values))
elif args[0] == 'get_values':
slave_id = int(args[1])
name = args[2]
address = int(args[3])
length = int(args[4])
slave = server.get_slave(slave_id)
values = slave.get_values(name, address, length)
sys.stdout.write('done: values read: %s\r\n' % str(values))
else:
sys.stdout.write("unknown command %s\r\n" % args[0])
finally:
server.stop()
def startTcpListener(self, ):
server = modbus_tcp.TcpServer(address=self.hostName,
port=int(self.port))
server.start()
self.server = server
config = configparser.ConfigParser()
config.read('config.ini')
# mqtt configure
MQTT_ServerIP = config['General']['Datalake_IP']
MQTT_ServerPort = 1883 # int(config['General']['MQTT_ServerPort'])
MQTT_SubTopic = config['Algorithm']['topic']
# modbus
modbus_ip = config['Modbus']['ip']
modbus_port = 502 # int(config['Modbus']['port'])
modbus_slave = int(config['Modbus']['slaveID'])
modbus_dataCnt = int(config['Modbus']['data_cnt'])
# Create server
server = modbus_tcp.TcpServer(address=modbus_ip,
port=modbus_port) # Default port = 502
slaver = server.add_slave(modbus_slave) # Slave_ID = 1
data = 0
print("===========================")
print("Data lake IP: {}".format(MQTT_ServerIP))
print("S_Topic: {}".format(MQTT_SubTopic))
print("\n===========================")
print("Modbus IP: {}".format(modbus_ip))
print("Modbus SlaveID: {}".format(modbus_slave))
print("Modbus Data Count: {}".format(modbus_dataCnt))
''' mqtt '''
b1 = 0xff80 & j[0]
b1 |= (0x000f & j[0]) << 3
b1 |= (0x7000 & j[1]) >> 13
b2 = 0xffff & (j[1] << 3)
b2 |= (0x7000 & j[2]) >> 13
slave_1.set_values("ro", addr, [b1, b2])
"""
return val
if __name__ == "__main__":
try:
""" Initialize the MODBUS TCP slave """
mb_start = 40001
mb_len = 100
server = modbus_tcp.TcpServer(address='0.0.0.0')
server.start()
slave_1 = server.add_slave(1)
slave_1.add_block('ro', cst.HOLDING_REGISTERS, mb_start, mb_len)
# Example: modpoll -0 -m tcp -t 4:float -r 40001 -c 46 192.168.x.x
""" Initialize AIO """
# Set to your Adafruit IO key.
# Remember, your key is a secret,
# so make sure not to publish it when you publish this code!
ADAFRUIT_IO_KEY = 'YOUR_AIO_KEY'
# Set to your Adafruit IO username.
# (go to https://accounts.adafruit.com to find your username)
ADAFRUIT_IO_USERNAME = '******'
aio = MQTTClient(ADAFRUIT_IO_USERNAME, ADAFRUIT_IO_KEY)
aio.connect()
def main():
"""main"""
slaveid = 1
logger = modbus_tk.utils.create_logger(name="console",
record_format="%(message)s")
try:
# get current ipaddr
# gw = os.popen("ip -4 route show default").read().split()
# s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
# # s.settimeout(CHECK_TIMEOUT)
# s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
# # S.bind(('', UDP_PORT))
# s.connect((gw[2], 0))
# ipaddr = s.getsockname()[0]
# print("IP:", ipaddr)
# s.close()
# time.sleep(1)
# ipaddr = "192.168.1.112"
ipaddr = os.popen(
"ifconfig | grep 'inet addr:' | grep -v '127.0.0.1' | cut -d: -f2 | awk '{print $1}' | head -1"
).read()
print("IP:", ipaddr)
# Create the server
# server = modbus_tcp.TcpServer(address='192.168.1.111')
server = modbus_tcp.TcpServer(address=ipaddr)
logger.info("esimtech modbus server running...")
logger.info("enter 'quit' for closing the server")
server.start()
slave_1 = server.add_slave(slaveid)
slave_1.add_block('HOLDING_REGISTERS', cst.HOLDING_REGISTERS, 0, 16)
slave_1.add_block('DISCRETE_INPUTS', cst.DISCRETE_INPUTS, 0, 16)
slave_1.add_block('READ_INPUT_REGISTERS', cst.READ_INPUT_REGISTERS, 0,
16)
slave_1.add_block('COILS', cst.COILS, 0, 16)
# 初始化HOLDING_REGISTERS值
# 命令行读取COILS的值 get_values 1 2 0 5
init_value = 0x0
length = 16
init_value_list = [init_value] * length
slave = server.get_slave(1)
slave.set_values('HOLDING_REGISTERS', 0, init_value_list)
# init mcp23s17
mcp_u1 = MCP23S17(bus=0x00, ce=0x00, deviceID=0x00)
mcp_u2 = MCP23S17(bus=0x00, ce=0x00, deviceID=0x01)
mcp_u3 = MCP23S17(bus=0x00, ce=0x00, deviceID=0x02)
mcp_u1.open()
mcp_u2.open()
mcp_u3.open()
for x in range(0, 16):
mcp_u1.setDirection(x, mcp_u1.DIR_INPUT)
mcp_u1.setPullupMode(x, mcp_u1.PULLUP_ENABLED)
mcp_u2.setDirection(x, mcp_u2.DIR_OUTPUT)
# status led
mcp_u3.setDirection(13, mcp_u3.DIR_OUTPUT)
mcp_u3.setPullupMode(13, mcp_u3.PULLUP_ENABLED)
thread_1 = InputLoopThread(server, slaveid, mcp_u1)
thread_1.start()
thread_2 = OutputLoopThread(server, slaveid, mcp_u2)
thread_2.start()
thread_3 = StatusHoldingThread(ipaddr, q, mcp_u3)
thread_3.start()
# block here until get message
q.get(True)
print("restart program")
# restart_program()
thread_1.stop()
thread_2.stop()
thread_3.stop()
server.stop()
GPIO.cleanup()
time.sleep(1)
python = sys.executable
os.execl(python, python, *sys.argv)
# thread_3.join()
# while True:
# cmd = sys.stdin.readline()
# args = cmd.split(' ')
#
# if cmd.find('quit') == 0:
# sys.stdout.write('bye-bye\r\n')
# break
#
# elif args[0] == 'add_slave':
# slave_id = int(args[1])
# server.add_slave(slave_id)
# sys.stdout.write('done: slave %d added\r\n' % slave_id)
#
# elif args[0] == 'add_block':
# slave_id = int(args[1])
# name = args[2]
# block_type = int(args[3])
# starting_address = int(args[4])
# length = int(args[5])
# slave = server.get_slave(slave_id)
# slave.add_block(name, block_type, starting_address, length)
# sys.stdout.write('done: block %s added\r\n' % name)
#
# elif args[0] == 'set_values':
# slave_id = int(args[1])
# name = args[2]
# address = int(args[3])
# values = []
# for val in args[4:]:
# values.append(int(val))
# slave = server.get_slave(slave_id)
# slave.set_values(name, address, values)
# values = slave.get_values(name, address, len(values))
# sys.stdout.write('done: values written: %s\r\n' % str(values))
#
# elif args[0] == 'get_values':
# slave_id = int(args[1])
# name = args[2]
# address = int(args[3])
# length = int(args[4])
# slave = server.get_slave(slave_id)
# values = slave.get_values(name, address, length)
# sys.stdout.write('done: values read: %s\r\n' % str(values))
#
# else:
# sys.stdout.write("unknown command %s\r\n" % args[0])
finally:
thread_1.stop()
thread_2.stop()
thread_3.stop()
server.stop()
GPIO.cleanup()
def __init__(self):
self.Logger = utils.create_logger(
name="console") # record_format="%(message)s"
self.server = modbus_tcp.TcpServer() # address="192.168.8.25"
def setUp(self):
self.server = modbus_tcp.TcpServer()
import time
import sys
import logging
import threading
import modbus_tk
import modbus_tk.defines as cst
import modbus_tk.modbus as modbus
import modbus_tk.modbus_tcp as modbus_tcp
import random
LOGGER = modbus_tk.utils.create_logger(name="console", record_format="%(message)s")
if __name__ == "__main__":
try:
SERVER = modbus_tcp.TcpServer(address="127.0.0.1", port=502) # connection set up
LOGGER.info("running...")
SERVER.start() # server started
LOGGER.info("server started")
SLAVE1 = SERVER.add_slave(1)
SLAVE1.add_block('A', cst.HOLDING_REGISTERS, 0, 4) # add block function
LOGGER.info("SLAVE1 add_slave")
SLAVE1.set_values('A', 0, 10*[0]) # set value function
LOGGER.info("SLAVE1 set_values")
finally:
SERVER.stop()
logger = modbus_tk.utils.create_logger('console')
# import string
print('============================================================')
print('MODBUS TCP Simulator V1.2 (20200415)')
#ipp=input('Please input your server IP, then press "ENTER" : ') #Set host IP
ppo = input('Please input your MODBUS/TCP port, then press "ENTER" :'
) #Set MODBUS/TCP port
sIP = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) #auto to get host IP
sIP.connect(("8.8.8.8", 80))
print('The MODBUS/TCP server IP= {}, Start!'.format(sIP.getsockname()[0]))
print('============================================================')
ipp = sIP.getsockname()[0]
print('Polls / 4X / 0X ')
sIP.close()
try:
server = modbus_tcp.TcpServer(port=int(ppo), address=ipp, timeout_in_sec=3)
master = modbus_tcp.TcpMaster(ipp, int(ppo))
master.set_timeout(3.0)
server.start()
slaveID1 = server.add_slave(2)
slaveID1.add_block('block1', mtk.HOLDING_REGISTERS, 0, 6)
slaveID2 = server.add_slave(3)
slaveID2.add_block('block2', mtk.COILS, 0, 6)
logger.info('MODBUS TCP Server Start!')
count = 0
while True:
time.sleep(1)
count += 1
HV001 = random.randint(0, 65535)
HV002 = random.randint(0, 65535)
HV003 = random.randint(0, 65535)
def __init__(self):
self.slave1 = None
self.modbussever = modbus_tcp.TcpServer(
port=local_port) # address=''默认表示获取本机地址
self.heart_beat = 0