fov = 220e-3
Nx = 64
Ny = 64
slice_thickness = 3e-3
dt_GE = 4e-6
flip = 90 * pi / 180
kwargs_for_sinc = {
"flip_angle": flip,
"system": system,
"duration": 2.5e-3,
"slice_thickness": slice_thickness,
"apodization": 0.5,
"time_bw_product": 4
}
rf, gz = makesincpulse(kwargs_for_sinc, 2)
# plt.plot(rf.t[0], rf.signal[0])
# plt.show()
delta_k = 1 / fov
kWidth = Nx * delta_k
readoutTime = Nx * dt_GE
kwargs_for_gx = {
"channel": 'x',
"system": system,
"flat_area": kWidth,
"flat_time": readoutTime
}
gx = maketrapezoid(kwargs_for_gx)
kwargs_for_adc = {
"num_samples": Nx,
kwargs_for_opts = {"max_grad": 33, "grad_unit": "mT/m", "max_slew": 100, "slew_unit": "T/m/s", "rf_dead_time": 10e-6,
"adc_dead_time": 10e-6}
system = Opts(kwargs_for_opts)
seq = Sequence(system)
TE, TR = 100e-3, 2000e-3
fov = 256e-3
Nx = 256
Ny = 256
slice_thickness = 3e-3
dt_GE = 4e-6
flip = 90 * pi / 180
kwargs_for_sinc = {"flip_angle": flip, "system": system, "duration": 2.5e-3, "slice_thickness": slice_thickness,
"apodization": 0.5, "time_bw_product": 4}
rf, gz = makesincpulse(kwargs_for_sinc, 2)
# plt.plot(rf.t[0], rf.signal[0])
# plt.show()
delta_k = 1 / fov
kWidth = Nx * delta_k
readoutTime = Nx * dt_GE
kwargs_for_gx = {"channel": 'x', "system": system, "flat_area": kWidth, "flat_time": readoutTime}
gx = maketrapezoid(kwargs_for_gx)
kwargs_for_adc = {"num_samples": Nx, "system": system, "duration": gx.flat_time, "delay": gx.rise_time}
adc = makeadc(kwargs_for_adc)
kwargs_for_gxpre = {"channel": 'x', "system": system, "area": -gx.area / 2, "duration": 2.5e-3}
gx_pre = maketrapezoid(kwargs_for_gxpre)
kwargs_for_gz_reph = {"channel": 'z', "system": system, "area": -gz.area / 2, "duration": 2.5e-3}
gz_reph = maketrapezoid(kwargs_for_gz_reph)
def make_se_epi(self):
kwargs_for_opts = {"max_grad": self.max_grad, "grad_unit": "mT/m", "max_slew": self.max_slew,
"slew_unit": "T/m/s", "rf_dead_time": 10e-6, "adc_dead_time": 10e-6}
system = Opts(kwargs_for_opts)
seq = Sequence(system)
slice_thickness = 3e-3
flip = 90 * pi / 180
kwargs_for_sinc = {"flip_angle": flip, "system": system, "duration": 3e-3, "slice_thickness": slice_thickness,
"apodization": 0.5, "time_bw_product": 4}
rf, gz = makesincpulse(kwargs_for_sinc, 2)
# plt.plot(rf.t[0], rf.signal[0])
# plt.show()
delta_k = 1 / self.fov
k_width = self.Nx * delta_k
readout_time = 3.2e-4
kwargs_for_gx = {"channel": 'x', "system": system, "flat_area": k_width, "flat_time": readout_time}
gx = maketrapezoid(kwargs_for_gx)
kwargs_for_adc = {"num_samples": self.Nx, "system": system, "duration": gx.flat_time, "delay": gx.rise_time}
adc = makeadc(kwargs_for_adc)
pre_time = 8e-4
kwargs_for_gxpre = {"channel": 'x', "system": system, "area": -gx.area / 2, "duration": pre_time}
gx_pre = maketrapezoid(kwargs_for_gxpre)
kwargs_for_gz_reph = {"channel": 'z', "system": system, "area": -gz.area / 2, "duration": pre_time}
gz_reph = maketrapezoid(kwargs_for_gz_reph)
kwargs_for_gy_pre = {"channel": 'y', "system": system, "area": -self.Ny / 2 * delta_k, "duration": pre_time}
gy_pre = maketrapezoid(kwargs_for_gy_pre)
dur = ceil(2 * sqrt(delta_k / system.max_slew) / 10e-6) * 10e-6
kwargs_for_gy = {"channel": 'y', "system": system, "area": delta_k, "duration": dur}
gy = maketrapezoid(kwargs_for_gy)
flip = 180 * pi / 180
kwargs_for_sinc = {"flip_angle": flip, "system": system, "duration": 500e-6}
rf180 = makeblockpulse(kwargs_for_sinc)
kwargs_for_gz_spoil = {"channel": 'z', "system": system, "area": gz.area * 2, "duration": 3 * pre_time}
gz_spoil = maketrapezoid(kwargs_for_gz_spoil)
TE = self.te
duration_to_center = (self.Nx / 2 + 0.5) * calcduration(gx) + self.Ny / 2 * calcduration(gy)
delayTE1 = TE / 2 - calcduration(gz) / 2 - pre_time - calcduration(gz_spoil) - calcduration(rf180) / 2
delayTE2 = TE / 2 - calcduration(rf180) / 2 - calcduration(gz_spoil) - duration_to_center
delay1 = makedelay(delayTE1)
delay2 = makedelay(delayTE2)
seq.add_block(rf, gz)
seq.add_block(gx_pre, gy_pre, gz_reph)
seq.add_block(delay1)
seq.add_block(gz_spoil)
seq.add_block(rf180)
seq.add_block(gz_spoil)
seq.add_block(delay2)
for i in range(self.Ny):
seq.add_block(gx, adc)
seq.add_block(gy)
gx.amplitude = -gx.amplitude
seq.add_block(makedelay(1))
return seq
def make_event_holders(self):
"""Make appropriate Holder objects depending on the Event type."""
self.system = self.in_dict['system']
# arbgrad_file_path is only for arbitrary gradients
arbgrad_file_path = self.all_event_def[
'file_path'] if 'file_path' in self.all_event_def else None
self.all_event_holders = {}
for event in self.all_event_def:
event_unique_name = event['event_unique_name']
event_name = event['event_name']
event_values = list(event['event_values'].values())
include_in_loop = event['include_in_loop']
if event_name == 'Delay':
params = self.parse_config_params(event_values)
delay = makedelay(params[0])
self.all_event_holders[
event_unique_name] = delay, include_in_loop
elif event_name == 'SincRF':
include_gz = event['include_gz']
max_grad, max_slew, flip_angle, duration, freq_offset, phase_offset, time_bw_product, apodization, slice_thickness = self.parse_config_params(
event_values)
flip_angle = math.radians(flip_angle)
max_grad = convert.convert_from_to(max_grad, 'mT/m')
max_slew = convert.convert_from_to(max_slew, 'mT/m/ms')
max_grad = self.system.max_grad if max_grad == 0 else max_grad
max_slew = self.system.max_slew if max_slew == 0 else max_slew
kwargs_for_sinc = {
"flip_angle": flip_angle,
"system": self.system,
"duration": duration,
"freq_offset": freq_offset,
"phase_offset": phase_offset,
"time_bw_product": time_bw_product,
"apodization": apodization,
"max_grad": max_grad,
"max_slew": max_slew,
"slice_thickness": slice_thickness
}
if include_gz:
rf, gz = makesincpulse(kwargs_for_sinc, 2)
self.all_event_holders[
event_unique_name] = rf, include_in_loop
self.all_event_holders[
'gz_' + event_unique_name] = gz, include_in_loop
else:
rf = makesincpulse(kwargs_for_sinc)
self.all_event_holders[
event_unique_name] = rf, include_in_loop
elif event_name == 'BlockRF':
include_gz = event['include_gz']
max_grad, max_slew, flip_angle, duration, freq_offset, phase_offset, time_bw_product, bandwidth, slice_thickness = self.parse_config_params(
event_values)
flip_angle = math.radians(flip_angle)
max_grad = convert.convert_from_to(max_grad, 'mT/m')
max_slew = convert.convert_from_to(max_slew, 'mT/m/ms')
max_grad = self.system.max_grad if max_grad == 0 else max_grad
max_slew = self.system.max_slew if max_slew == 0 else max_slew
kwargs_for_block = {
"flip_angle": flip_angle,
"system": self.system,
"duration": duration,
"freq_offset": freq_offset,
"phase_offset": phase_offset,
"time_bw_product": time_bw_product,
"bandwidth": bandwidth,
"max_grad": max_grad,
"max_slew": max_slew,
"slice_thickness": slice_thickness
}
if include_gz:
rf, gz = makeblockpulse(kwargs_for_block, 2)
self.all_event_holders[
event_unique_name] = rf, include_in_loop
self.all_event_holders[
'gz_' + event_unique_name] = gz, include_in_loop
else:
rf = makeblockpulse(kwargs_for_block)
self.all_event_holders[
event_unique_name] = rf, include_in_loop
elif event_name == 'G':
channel = event_values.pop(0)
max_grad, max_slew, duration, area, flat_time, flat_area, amplitude, rise_time = self.parse_config_params(
event_values)
# area, flat_area and amplitude should be reset to -1 if user does not input any values. This is
# because the default values are -1 in maketrap method.
area = area if area != 0 else -1
flat_area = flat_area if flat_area != 0 else -1
amplitude = amplitude if amplitude != 0 else -1
max_grad = convert.convert_from_to(max_grad, 'mT/m')
max_slew = convert.convert_from_to(max_slew, 'mT/m/ms')
max_grad = self.system.max_grad if max_grad == 0 else max_grad
max_slew = self.system.max_slew if max_slew == 0 else max_slew
kwargs_for_trap = {
"channel": channel,
"system": self.system,
"duration": duration,
"area": area,
"flat_time": flat_time,
"flat_area": flat_area,
"amplitude": amplitude,
"max_grad": max_grad,
"max_slew": max_slew,
"rise_time": rise_time
}
trap = maketrapezoid(kwargs_for_trap)
self.all_event_holders[
event_unique_name] = trap, include_in_loop
elif event_name == 'GyPre':
duration, area = self.parse_config_params(event_values)
Ny = self.system.Ny
delta_k = 1 / self.system.fov
gy_pre_list = []
for i in range(int(Ny)):
kwargs_for_gy_pre = {
"channel": 'y',
"system": self.system,
"area": (i - Ny / 2) * delta_k,
"duration": duration
}
if area != 0:
kwargs_for_gy_pre['area'] = area
gy_pre = maketrapezoid(kwargs_for_gy_pre)
gy_pre_list.append(gy_pre)
self.all_event_holders[event_unique_name] = gy_pre_list, True
elif event_name == 'ArbGrad':
channel = event_values.pop(0)
max_grad, max_slew = self.parse_config_params(event_values)
file = h5py.File(gpi.TranslateFileURI(arbgrad_file_path), "r")
self.dataset = str()
def append_if_dataset(name, obj):
if isinstance(obj, h5py.Dataset):
self.dataset = name
return True
file.visititems(append_if_dataset)
waveform = file[self.dataset].value
kwargs_for_arb_grad = {
"channel": channel,
"waveform": waveform,
"max_grad": max_grad,
"max_slew": max_slew,
"system": self.system
}
arb_grad = makearbitrarygrad(kwargs_for_arb_grad)
self.all_event_holders[
event_unique_name] = arb_grad, include_in_loop
elif event_name == 'ADC':
num_samples, dwell, duration, delay, freq_offset, phase_offset = self.parse_config_params(
event_values)
kwargs_for_adc = {
"num_samples": num_samples,
"system": self.system,
"dwell": dwell,
"duration": duration,
"delay": delay,
"freq_offset": freq_offset,
"phase_offset": phase_offset
}
adc = makeadc(kwargs_for_adc)
self.all_event_holders[
event_unique_name] = adc, include_in_loop