def fCreate_CreditsForMonth(pMonth):
# ---------------------------------------------------#
myTools.sectionStartTimeStamp("credits" + str(pMonth))
logging.debug("Create_CreditsForMonth: " + str(pMonth))
allClients = names_Init.fInit_Clients()
count = 0
myTools.getFocus()
# open a/r tran list
type("t", KeyModifier.CTRL)
myTools.waitForTransList()
for oneClient in allClients:
count += 1
# always create credits for first 5 clients
# then create credits for 1 out of 9 next clients
if (count in range(6)) or ((count + pMonth) % 9 == 0):
creditAmount = pMonth + pMonth / float(100)
fCreate_OneCredit(oneClient, count, pMonth, creditAmount)
else:
logging.debug("-- skip: " + str(pMonth) + "-" + oneClient)
type(Key.F4, KeyModifier.CTRL)
time.sleep(1)
type(Key.F4, KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
myTools.checkProcesses()
def fSetup_ClientHold():
#---------------------------------------------------#
myTools.sectionStartTimeStamp("set up client hold")
logging.debug('set up client hold')
# make sure timeslips has focus
myTools.getFocus()
logging.debug('- open client list')
type("n",KeyModifier.ALT)
type("i")
time.sleep(1)
fHold_Time_NextBill_Hours()
fHold_Exp_AllBills_Amount()
fHold_Bill_AllBills_AmountAndHours()
fHold_AR_AllBills()
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
def fChange_ClientSettings():
#---------------------------------------------------#
logging.debug('- Change_ClientSettings')
myTools.getFocus()
logging.debug('-- change a client')
type("i",KeyModifier.CTRL)
time.sleep(1)
type(Key.ENTER)
time.sleep(1)
myTools.pressF6(4)
if Settings.tsVersion > "2014":
myTools.pressF6(3)
time.sleep(1)
myTools.pressTAB(3)
time.sleep(1)
type("my")
logging.debug('-- save client')
type("s",KeyModifier.CTRL)
fExport_ClientSettings()
fExport_TemplateSettings()
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
type(Key.F4,KeyModifier.CTRL)
def fFundsAccouts_Setup():
# - - - - - - - - - - - - - - - - - - - - - - - - - #
myTools.sectionStartTimeStamp("funds account")
logging.debug('FundsAccount_Setup')
# make sure timeslips has focus
myTools.getFocus()
# switch date to 1/27/13
fSet_BillDate(1)
fBankAccount_Create()
# open client list
type("i",KeyModifier.CTRL)
time.sleep(1)
clientList = ["Hadley","Halifax"]
count = 0
for oneCli in clientList:
count += 1
fFundsAccount_Create(oneCli,count)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
def fSetup_SplitBills():
#---------------------------------------------------#
myTools.sectionStartTimeStamp("setup split")
logging.debug('- set up split bills')
myTools.getFocus()
# open split billing rule list
type("b",KeyModifier.ALT)
time.sleep(1)
type("i")
time.sleep(1)
fSetup_Primary("Beverly")
# new secondary
myTools.pressTAB(7)
fSetup_Secondary("Peabody",15)
fSetup_Secondary("Saugus",20)
# done
myTools.pressTAB(4)
type(Key.SPACE)
myTools.sectionEndTimeStamp()
backup_Data.fBackup_Checkpoint("split")
def fEdit_Client():
#---------------------------------------------------#
myTools.sectionStartTimeStamp("edit client")
logging.debug('Edit_Client')
# make sure timeslips has focus
myTools.getFocus()
fEdit_CliGenInfo()
fEdit_CliCustom()
fEdit_CliRatesNotes()
logging.debug('- save')
type("s",KeyModifier.CTRL)
time.sleep(1)
fEdit_DefaultRates()
fEdit_InterestSetting()
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
def fPrint_FeeAllocPer(pReportMonth,pRepExt):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("print FeeAllocPer")
# name report file: ex: PreBill-03
reportName = myTools.buildRepName("FeeAllocPer",pRepExt)
logging.debug('Print_FeeAllocPer: ' + reportName)
# make sure timeslips has focus
myTools.getFocus()
logging.debug('- open FeeAllocPer')
type("r",KeyModifier.ALT)
type("t")
time.sleep(1)
myTools.pressDOWN(3)
time.sleep(1)
# choose csv
myTools.pressSHIFTTAB(2)
type("c")
time.sleep(1)
myTools.enterCurrentMonthOnList(pReportMonth)
# print the report
type(Key.ENTER)
time.sleep(1)
myTools.finishReport(reportName)
def fCreate_Discounts(pMonth):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("discounts" + str(pMonth))
logging.debug('fCreate_Discounts: ' + str(pMonth))
# list the client that will get a refund each month
discountClients = ["Natick","Orange","Oakham","Oak Bluffs","Southampton","Otis","Oxford","Leyden","Monroe","Monson","Methuen","Uxbridge"]
oneClient = discountClients[(pMonth - 1)]
myTools.getFocus()
# open a/r tran list
type("t",KeyModifier.CTRL)
myTools.waitForTransList()
discountAmount = 49 + pMonth/float(100)
fCreate_OneDiscount(oneClient,pMonth,discountAmount)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
myTools.checkProcesses()
def fCreate_Categories():
# ---------------------------------------------------#
myTools.sectionStartTimeStamp("categories")
logging.debug("fCreate_Categories")
# make sure timeslips has focus
myTools.getFocus()
logging.debug("- open category list")
type("p", KeyModifier.ALT)
# hot keys changed for TS2014
if int(Settings.tsVersion) < 2014:
type("i")
else:
type("o")
time.sleep(1)
for category in ["Construction", "General", "Landscape", "Hardware", "Supplies", "Materials", "Other"]:
logging.debug("-- create: " + category)
type("n", KeyModifier.ALT)
type(category)
type(Key.ENTER)
logging.debug("- close list")
myTools.pressTAB(4)
type(Key.ENTER)
myTools.sectionEndTimeStamp()
def fCreate_FinanceCharges(pMonth):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("finance" + str(pMonth))
logging.debug('Create_FinanceCharges: ' + str(pMonth))
allClients = names_Init.fInit_Clients()
count = 0
myTools.getFocus()
# client list
type("i",KeyModifier.CTRL)
for oneClient in allClients:
count += 1
# always create finance charge for first 5 clients
# then create finance charge for 1 out of 35 next clients
if (count in range(6)) or ((count + pMonth) % 35 == 0):
financeCharge = str(count) + ".99"
fCreate_OneFinanceCharge(oneClient,count,pMonth,financeCharge)
else:
logging.debug('-- skip: ' + str(pMonth) + "-" + oneClient)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
def fBill_BillFields():
#---------------------------------------------------#
myTools.sectionStartTimeStamp("bill fields")
logging.debug("fBill_BillFields")
buName = Settings.tsVersion + "-bill-12b"
backup_Data.fRestore_Backup(buName)
reportName = "BillFields-13-" + Settings.tsVersion + ".txt"
myTools.getFocus() # make sure timeslips has focus
if int(Settings.tsVersion) < 2016: # to get around a defect in pre-2016
type("i",KeyModifier.CTRL) # open client info and close it to load custom fields
time.sleep(1)
type("o",KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
bill_ImportLayout.fImport_BillLayout("Fields") # import the layout
fSet_BillDate(12) # set billing data to 12/27 for text bills
fPrint_BillsToText(reportName) # print all bills to one text file
reports_Compare.Compare_OneReport(reportName)
myTools.sectionEndTimeStamp()
def fCreate_Writeoffs(pMonth):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("writeoffs" + str(pMonth))
logging.debug('Create_Writeoffs: ' + str(pMonth))
count = 0
myTools.getFocus()
# open a/r tran list
type("t",KeyModifier.CTRL)
myTools.waitForTransList()
clientList = ["Blackstone","Carver"]
for woClient in clientList:
count += 1
if woClient == "Blackstone":
woAmount = 2
else:
woAmount = 3
woAmount = woAmount + pMonth/float(100)
fCreate_OneWriteOff(woClient,count,pMonth,woAmount)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
myTools.checkProcesses()
def fBudget_Setup():
#---------------------------------------------------#
myTools.sectionStartTimeStamp("budgets")
logging.debug('budgets')
myTools.getFocus()
# open budget setup
type("n", KeyModifier.ALT)
type("b")
time.sleep(1)
if (int(Settings.tsVersion) > 2016) and (Settings.tsDB == "PREM"):
fTimekeeperBudget_New()
fClientBudget_New()
fFirmBudget_New()
else:
fTimekeeperBudget()
fClientBudget()
fFirmBudget()
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
def fCreate_Refunds(pMonth):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("refunds" + str(pMonth))
logging.debug('fCreate_Refunds: ' + str(pMonth))
# list the client that will get a refund each month
refundClients = ["Hawley","Haverhill","Hatfield","Harwich","Harvard","Hawley","Haverhill","Hatfield","Harwich","Harvard","Hawley","Haverhill"]
oneClient = refundClients[(pMonth - 1)]
myTools.getFocus()
# open a/r tran list
type("t",KeyModifier.CTRL)
myTools.waitForTransList()
refundAmount = 99 + pMonth/float(100)
fCreate_OneRefund(oneClient,pMonth,refundAmount)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
myTools.checkProcesses()
def fCreate_Transfers(pMonth):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("transfers" + str(pMonth))
logging.debug('Create_Transfers: ' + str(pMonth))
allClients = ["East.Bridgewater","North.Adams","West.Boylston"]
count = 0
myTools.getFocus()
# open a/r tran list
type("t",KeyModifier.CTRL)
myTools.waitForTransList()
for oneClient in allClients:
count += 1
transferAmount = 10 + int(count) + pMonth/float(100)
fCreate_OneTransfer(oneClient,count,pMonth,transferAmount)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
myTools.checkProcesses()
def fSetup_InvoiceListing():
# ---------------------------------------------------#
logging.debug("- set up invlist")
myTools.getFocus()
type("r", KeyModifier.ALT)
type("a")
time.sleep(1)
type("i")
time.sleep(1)
myTools.removeDateAndTime()
type(Key.F4, KeyModifier.CTRL)
time.sleep(1)
type("y")
time.sleep(1)
# open report
type("o", KeyModifier.CTRL)
# add invoice number sort
type(Key.F6)
time.sleep(1)
myTools.pressTAB(2)
time.sleep(1)
type(Key.SPACE)
# close and save report
type(Key.F4, KeyModifier.CTRL)
time.sleep(1)
type("y")
time.sleep(1)
type(Key.F4, KeyModifier.CTRL)
def fPrint_SlipListCalc(pReportMonth,pRepExt):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("print slipcalcs")
# name report file: ex: UDSlip1-03
reportName = myTools.buildRepName("UDSCalc",pRepExt)
logging.debug('Print_UDSCalc: ' + reportName)
myTools.getFocus()
logging.debug('- open report list')
type("r",KeyModifier.ALT)
type("s")
time.sleep(1)
logging.debug('- choose report')
type("uds c")
time.sleep(1)
# fSort_SlipReportFields()
fChoose_CSV_Print(reportName)
myTools.waitForReport()
reports_Compare.Compare_OneReport(reportName)
# close the report
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type("n")
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
def fPrint_ARwRunBal(pReportMonth,pRepExt):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("print ARwRunBal")
# name report file: ex: UDSlip1-03
reportName = myTools.buildRepName("ARwRunBal",pRepExt)
logging.debug('fPrint_ARwRunBal: ' + reportName)
myTools.getFocus()
logging.debug('- open report list')
type("r",KeyModifier.ALT)
type("a")
time.sleep(1)
logging.debug('- choose report')
myTools.pressDOWN(2)
time.sleep(1)
# choose txt
myTools.pressSHIFTTAB(2)
time.sleep(1)
type("t")
time.sleep(1)
myTools.enterCurrentMonthOnList(pReportMonth)
# print the report
type(Key.ENTER)
time.sleep(1)
myTools.finishReport(reportName)
def fCreate_TransfersToFunds(pMonth):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("transfer funds" + str(pMonth))
logging.debug('Create_TransfersFunds: ' + str(pMonth))
allClients = ["East.Brookfield","North.Andover","West.Bridgewater"]
count = 0
myTools.getFocus()
# open a/r tran list
type("t",KeyModifier.CTRL)
myTools.waitForTransList()
for oneClient in allClients:
count += 1
fCreate_OneFundsTransfer(oneClient,count,pMonth)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
myTools.checkProcesses()
def fPrint_FlatFee(pReportMonth,pRepExt):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("print FlatFee")
# name report file: ex: ARAgedBal-03
reportName = myTools.buildRepName("FlatFee",pRepExt)
logging.debug('Print_FlatFee: ' + reportName)
# make sure timeslips has focus
myTools.getFocus()
logging.debug('- open report')
type("r",KeyModifier.ALT)
type("c")
time.sleep(1)
type("f")
time.sleep(1)
# move to Print To and choose CSV
myTools.pressSHIFTTAB(2)
time.sleep(1)
type("c")
# print the report
type(Key.ENTER)
time.sleep(1)
myTools.finishReport(reportName)
def fCreate_PaymentsToAccount(pMonth):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("paystoaccount" + str(pMonth))
logging.debug('Create_PaysToAccount: ' + str(pMonth))
allClients = names_Init.fInit_Clients()
count = 0
myTools.getFocus()
# open funds list
type("f",KeyModifier.CTRL)
myTools.waitForFundsList()
# create PTA for first 5 clients and then every 6th client
for oneClient in allClients:
count += 1
if (count in range(6)) or ((count + pMonth) % 6 == 0):
ptaAmount = 25 + pMonth/float(100)
fCreate_OnePayToAccount(oneClient,count,pMonth,ptaAmount)
else:
logging.debug('-- skip: ' + str(pMonth) + "-" + oneClient)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
myTools.checkProcesses()
def fImport_Statement():
#---------------------------------------------------#
logging.debug('- fImport_Statement')
# make sure timeslips has focus
myTools.getFocus()
type("b",KeyModifier.ALT) # layouts
type("t")
time.sleep(1)
type(Key.F6)
time.sleep(1)
type("o",KeyModifier.CTRL) # open
time.sleep(1)
type("l",KeyModifier.ALT) # import
type("p")
time.sleep(1)
statementLayout = Settings.dataFolder + '\\Statement.tsl'
type(statementLayout)
time.sleep(1)
type(Key.ENTER)
time.sleep(1)
type("y")
time.sleep(1)
type(Key.F4,KeyModifier.CTRL) # close / save
time.sleep(1)
type("y")
time.sleep(1)
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
def fCreate_SlipListDetailed():
#---------------------------------------------------#
logging.debug('- fCreate_SlipListDetailed')
# make sure timeslips has focus
myTools.getFocus()
type(Key.F3,KeyModifier.CTRL) # create a report
time.sleep(1)
type("r",KeyModifier.ALT) # ud report
type("n",KeyModifier.ALT) # next
time.sleep(1)
type("s") # slip
type("n",KeyModifier.ALT) # next
time.sleep(1)
myTools.pressDOWN(2) # detailed Listing Simple
type("n",KeyModifier.ALT) # next
time.sleep(1)
type("n",KeyModifier.ALT) # next
type(Key.ENTER) # Open Report Entry
time.sleep(1)
type("s",KeyModifier.CTRL) # save
type(Key.ENTER) # OK
time.sleep(1)
type(Key.F4,KeyModifier.CTRL) # close report
time.sleep(1)
def fPrint_SlipFields(pReportMonth,pRepExt):
#---------------------------------------------------#
# this does not include applied fields, since we fixed some stuff in ts2016
myTools.sectionStartTimeStamp("print slipfields")
# name report file: ex: UDSlip1-03
reportName = myTools.buildRepName("UDSlip2",pRepExt)
logging.debug('Print_UDSlip2: ' + reportName)
myTools.getFocus()
logging.debug('- open report list')
type("r",KeyModifier.ALT)
type("s")
time.sleep(1)
logging.debug('- choose report')
type("UDS SlipFields")
time.sleep(1)
# fSort_SlipReportFields()
fChoose_CSV_Print(reportName)
myTools.waitForReport()
reports_Compare.Compare_OneReport(reportName)
# close the report
type(Key.F4,KeyModifier.CTRL)
time.sleep(1)
type("n")
type(Key.F4,KeyModifier.CTRL)
myTools.sectionEndTimeStamp()
def fPrint_InvoiceListing(pReportMonth, pRepExt):
# ---------------------------------------------------#
myTools.sectionStartTimeStamp("print invoicelist")
# name report file: ex: UDSlip1-03
reportName = myTools.buildRepName("InvList", pRepExt)
logging.debug("Print_InvoiceList: " + reportName)
myTools.getFocus()
logging.debug("- open report list")
type("r", KeyModifier.ALT)
type("a")
time.sleep(1)
logging.debug("- choose report")
type("i")
time.sleep(1)
# choose txt
myTools.pressSHIFTTAB(2)
time.sleep(1)
type("t")
time.sleep(1)
myTools.enterYearToDateOnList(pReportMonth)
# print the report
type(Key.ENTER)
time.sleep(1)
myTools.finishReport(reportName)
def Print_TkCC(pReportMonth,pRepExt):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("print tkcc")
# name report file: ex: TkCC-03
reportName = myTools.buildRepName("TkCC",pRepExt)
logging.debug('Print_TkCC: ' + reportName)
# make sure timeslips has focus
myTools.getFocus()
logging.debug('- open report')
type("r",KeyModifier.ALT)
type("t")
time.sleep(2)
type("timekeeper cont")
time.sleep(1)
myTools.pressDOWN(1)
time.sleep(1)
type("o",KeyModifier.CTRL)
time.sleep(1)
logging.debug('- default options')
# options button
myTools.pressSHIFTTAB(4)
type(Key.ENTER)
time.sleep(1)
# default button
myTools.pressSHIFTTAB(4)
type(Key.ENTER)
time.sleep(1)
# show client breakdown
myTools.pressTAB(4)
type(Key.SPACE)
time.sleep(1)
# close dialog
type(Key.ENTER)
time.sleep(1)
logging.debug('- print report')
# move to Print To and choose CSV
myTools.pressTAB(2)
type("c")
time.sleep(1)
if pReportMonth != 13:
Filter_SplitClients()
# print the report
type(Key.ENTER)
time.sleep(1)
myTools.finishReport(reportName)
def Open_SlipList():
#---------------------------------------------------#
# open slip list and verify it's open
myTools.getFocus()
type("m",KeyModifier.CTRL)
time.sleep(1)
click("number_of_slips.png")
def fPrint_AgedClient(pReportMonth,pRepExt):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("print AgedClient")
# name report file: ex: PreBill-03
reportName = myTools.buildRepName("AgedClient",pRepExt)
logging.debug('Print_AgedClient: ' + reportName)
# make sure timeslips has focus
myTools.getFocus()
logging.debug('- open PayPerf')
type("r",KeyModifier.ALT)
type("c")
time.sleep(1)
myTools.pressDOWN(1)
time.sleep(1)
logging.debug('- set up report')
type("o",KeyModifier.CTRL)
# Options
myTools.pressSHIFTTAB(4)
type(Key.SPACE)
time.sleep(1)
# Default
myTools.pressSHIFTTAB(4)
type(Key.SPACE)
time.sleep(1)
# Show hours
myTools.pressTAB(10)
type(Key.SPACE)
time.sleep(1)
# Show Adjustment columns
myTools.pressTAB(1)
type(Key.SPACE)
time.sleep(1)
# OK
type(Key.ENTER)
time.sleep(1)
# choose csv
myTools.pressTAB(2)
type("c")
time.sleep(1)
myTools.enterSlipFilter(pReportMonth,"yy")
# print the report
type(Key.ENTER)
time.sleep(1)
myTools.finishReport(reportName)
def Print_GLXfer(pReportMonth,pRepExt):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("print glxfer")
# name report file: ex: TkCC-03
reportName = myTools.buildRepName("GLXfer",pRepExt)
logging.debug('Print_GLXfer: ' + reportName)
# make sure timeslips has focus
myTools.getFocus()
logging.debug('- open report')
type("a",KeyModifier.ALT)
type("g")
time.sleep(1)
logging.debug('- default options')
# options button
myTools.pressSHIFTTAB(4)
type(Key.ENTER)
time.sleep(1)
# default button
myTools.pressSHIFTTAB(4)
type(Key.ENTER)
time.sleep(1)
# trans types
myTools.pressTAB(4)
type(Key.ENTER)
time.sleep(1)
# remove transfer since they were wrong before ts2016
type("t")
time.sleep(1)
type(Key.SPACE)
time.sleep(1)
type(Key.ENTER)
# close dialog
myTools.pressSHIFTTAB(3)
type(Key.ENTER)
time.sleep(1)
logging.debug('- print report')
# move to Print To and choose CSV
myTools.pressTAB(2)
type("c")
time.sleep(1)
# print the report
type(Key.ENTER)
time.sleep(1)
myTools.finishReport(reportName)
def Print_SlipTotalsWeekly(pReportMonth,pRepExt):
#---------------------------------------------------#
myTools.sectionStartTimeStamp("slip totals")
# name report file: ex: PayDistr-03
reportName = myTools.buildRepName("SlipTot",pRepExt)
logging.debug('Print_SlipTotalsWeekly: ' + reportName)
# make sure timeslips has focus
myTools.getFocus()
logging.debug('- open report')
type("r",KeyModifier.ALT)
type("s")
time.sleep(2)
type("w")
time.sleep(1)
type("o",KeyModifier.CTRL)
time.sleep(1)
logging.debug('- default options')
# switch to CSV
myTools.pressSHIFTTAB(2)
time.sleep(1)
type("c")
# options button
myTools.pressSHIFTTAB(2)
type(Key.ENTER)
time.sleep(1)
# default button
myTools.pressSHIFTTAB(4)
type(Key.ENTER)
time.sleep(1)
# Include totals
myTools.pressTAB(8)
time.sleep(1)
type(Key.SPACE)
# OK
type(Key.ENTER)
time.sleep(1)
myTools.enterSlipFilter(pReportMonth,"y")
logging.debug('- print report')
type(Key.ENTER)
time.sleep(1)
myTools.finishReport(reportName)
