def setUp(self):
self.model1 = parse.parse_xml("test/examples.xml", "test_pcreep")
E = [-100, 100000]
nu = 0.3
youngs = interpolate.PolynomialInterpolate(E)
poissons = interpolate.ConstantInterpolate(nu)
elastic = elasticity.IsotropicLinearElasticModel(
youngs, "youngs", poissons, "poissons")
surface = surfaces.IsoJ2()
Ts = [100.0, 300.0, 500.0, 700.0]
Sys = [1000.0, 120.0, 60.0, 30.0]
yields = interpolate.PiecewiseLinearInterpolate(Ts, Sys)
pmodel = models.SmallStrainPerfectPlasticity(elastic, surface, yields)
self.T = 550.0
self.tmax = 10.0
self.nsteps = 50.0
self.emax = np.array([0.1, 0.05, 0, -0.025, 0, 0])
A = 1.85e-10
n = 2.5
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
self.model2 = models.SmallStrainCreepPlasticity(
elastic, pmodel, cmodel)
def setUp(self):
self.hist0 = np.zeros((6, ))
self.A = 1.85e-10
self.n = 2.5
self.smodel = creep.PowerLawCreep(self.A, self.n)
self.cmodel = creep.J2CreepModel(self.smodel)
self.E = 150000.0
self.nu = 0.3
self.sY = 200.0
self.elastic = elasticity.IsotropicLinearElasticModel(
self.E, "youngs", self.nu, "poissons")
self.surface = surfaces.IsoJ2()
self.pmodel = models.SmallStrainPerfectPlasticity(
self.elastic, self.surface, self.sY)
self.model = models.SmallStrainCreepPlasticity(self.elastic,
self.pmodel,
self.cmodel)
self.efinal = np.array([0.1, -0.05, 0.02, -0.05, 0.1, -0.15])
self.tfinal = 10.0
self.T = 300.0
self.nsteps = 10
def setUp(self):
self.model1 = parse.parse_xml("test/examples.xml",
"test_creep_plasticity")
A = 1.85e-10
n = 2.5
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
E = 150000.0
nu = 0.3
sY = 200.0
H = E / 50.0
elastic = elasticity.IsotropicLinearElasticModel(
E, "youngs", nu, "poissons")
surface = surfaces.IsoJ2()
iso = hardening.LinearIsotropicHardeningRule(sY, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, iso)
pmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
self.model2 = models.SmallStrainCreepPlasticity(
elastic, pmodel, cmodel)
self.T = 300.0
self.tmax = 10.0
self.nsteps = 100.0
self.emax = np.array([0.1, 0, 0, 0, 0, 0])
def example4():
# T is in hours, strain in percent, stress in MPa
A = 1.85e-10
n = 2.5
m = 0.3
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
E = 150000.0
nu = 0.3
sY = 200.0
H = E / 25.0
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoJ2()
iso = hardening.LinearIsotropicHardeningRule(sY, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, iso)
pmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
model = models.SmallStrainCreepPlasticity(elastic, pmodel, cmodel)
res = drivers.creep(model, 205.0, 3600.0, 100.0, verbose = False,
nsteps_up = 500)
plt.plot(res['strain'], res['stress'])
plt.show()
def setUp(self):
self.hist0 = np.zeros((13, ))
self.A = 1.85e-10
self.n = 2.5
self.smodel = creep.PowerLawCreep(self.A, self.n)
self.cmodel = creep.J2CreepModel(self.smodel)
self.E = 150000.0
self.nu = 0.3
self.sY = 200.0
self.H = self.E / 50.0
self.elastic = elasticity.IsotropicLinearElasticModel(
self.E, "youngs", self.nu, "poissons")
self.surface = surfaces.IsoJ2()
self.iso = hardening.LinearIsotropicHardeningRule(self.sY, self.H)
self.flow = ri_flow.RateIndependentAssociativeFlow(
self.surface, self.iso)
self.pmodel = models.SmallStrainRateIndependentPlasticity(
self.elastic, self.flow)
self.model = models.SmallStrainCreepPlasticity(self.elastic,
self.pmodel,
self.cmodel)
self.efinal = np.array([0.1, -0.05, 0.02, -0.03, 0.1, -0.15])
self.tfinal = 10.0
self.T = 300.0
self.nsteps = 10
def gen_material(E, nu, sY, alpha, A, n):
"""
Generate a perfectly plastic + creep material model.
"""
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoJ2()
pmodel = models.SmallStrainPerfectPlasticity(elastic, surface, sY)
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
return models.SmallStrainCreepPlasticity(elastic, pmodel, cmodel, alpha = alpha)
def creep_ex():
E = 92000.0
nu = 0.3
s0 = 120.0
A = 1.0e-10
n = 3.0
Kp = E / 500
H = E / 500
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(s0, Kp)
kin = hardening.LinearKinematicHardeningRule(H)
hrule = hardening.CombinedHardeningRule(iso, kin)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
pmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
bmodel = models.SmallStrainCreepPlasticity(elastic, pmodel, cmodel)
A_damg = 1.0e-2
a_damg = 1.0
model = damage.NEMLPowerLawDamagedModel_sd(elastic,
A_damg,
a_damg,
bmodel,
verbose=False)
#res = drivers.uniaxial_test(model, 1.0e-2, emax = 0.25)
#plt.plot(res['strain'], res['stress'])
#plt.show()
res = drivers.creep(model, 120.0, 1.0, 393.0, verbose=False)
plt.plot(res['rtime'], res['rstrain'])
plt.show()
plt.loglog(res['rtime'], res['rrate'])
plt.show()
def test_creep_plasticity(self):
surface = surfaces.IsoJ2()
sy = 100.0
bmodel = models.SmallStrainPerfectPlasticity(self.elastic1, surface,
sy)
A = 1.85e-10
n = 12.0
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
model = models.SmallStrainCreepPlasticity(self.elastic1, bmodel,
cmodel)
self.very_close(model, self.emodel1)
model.set_elastic_model(self.elastic2)
self.very_close(model, self.emodel2)
def example3():
# T is in hours, strain in percent, stress in MPa
A = 1.85e-10
n = 2.5
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
E = 150000.0
nu = 0.3
sY = 200.0
H = E / 50.0
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoJ2()
iso = hardening.LinearIsotropicHardeningRule(sY, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, iso)
pmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
smax = 250.0
R = -0.5
srate = 1.0 * 3600.0
ncycles = 25
hold = 25
res1 = drivers.stress_cyclic(pmodel, smax, R, srate, ncycles,
hold_time = [0,hold])
model = models.SmallStrainCreepPlasticity(elastic, pmodel, cmodel, verbose = False)
res2 = drivers.stress_cyclic(model, smax, R, srate, ncycles,
hold_time = [0,hold], verbose = False)
plt.plot(res1['strain'], res1['stress'], 'k-')
plt.plot(res2['strain'], res2['stress'], 'r-')
plt.show()
# Damage parameters
xi = 0.478
phi = 1.914
S = 1.0e19
# Loading
srate = 100.0
# Setup model
emodel = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
bmodel = models.SmallStrainElasticity(emodel)
scmodel = creep.PowerLawCreep(A, n)
cfmodel = creep.J2CreepModel(scmodel)
cmodel = models.SmallStrainCreepPlasticity(emodel, bmodel, cfmodel)
model = damage.ClassicalCreepDamageModel_sd(emodel, S, xi, phi, cmodel)
model2 = damage.ModularCreepDamageModel_sd(
emodel, S, xi, phi, damage.VonMisesEffectiveStress(), cmodel)
# Computed life
srange = np.linspace(s0 / 2, s0, 10)
tfs = S**(xi) / (1 + phi) * srange**(-xi)
slife = []
slife2 = []
for s, tf in zip(srange, tfs):
res = drivers.creep(model,
s,
srate,
n = 45.0
eta = 200.0
iso2 = hardening.LinearIsotropicHardeningRule(0, H)
gpower = visco_flow.GPowerLaw(n, eta)
vflow = visco_flow.PerzynaFlowRule(surface, iso2, gpower)
gflow = general_flow.TVPFlowRule(elastic, vflow)
model3 = models.GeneralIntegrator(elastic, gflow)
# T is in hours, strain in percent, stress in MPa
A = 1.85e-9
n = 2.5
m = 0.3
smodel = creep.NortonBaileyCreep(A, n, m)
cmodel = creep.J2CreepModel(smodel)
model4 = models.SmallStrainCreepPlasticity(elastic, model1, cmodel)
erate = 1.0e-4
emax = 0.025
energy = emax * sY - 0.5 * sY * sY / E
dissipated = energy - 0.5 * sY * sY / E
res1 = drivers.uniaxial_test(model1, erate, emax=emax)
res2 = drivers.uniaxial_test(model2, erate, emax=emax)
res3 = drivers.uniaxial_test(model3, erate, emax=emax)
res4 = drivers.uniaxial_test(model4, erate, emax=emax)
print("")
n = 2.5
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
E = 150000.0
nu = 0.3
sY = 200.0
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoJ2()
pmodel = models.SmallStrainPerfectPlasticity(elastic, surface, sY)
model = models.SmallStrainCreepPlasticity(elastic, pmodel, cmodel)
res = drivers.creep(model, 200.0, 1.0e2, 1000.0, verbose=True)
plt.plot(res['time'], res['strain'])
plt.show()
res = drivers.strain_cyclic(model,
0.01,
-1,
1.0e-4,
15,
verbose=True,
nsteps=25,
hold_time=[10.0, 0])
plt.plot(res['strain'], res['stress'])
plt.show()
