# boot.py -- run on boot-up
from network import LoRa
import pycom
import ubinascii
import socket
import time
import lora_keys as keys
# Disable LTE radio
if pycom.lte_modem_en_on_boot():
print("LTE is enabled. Disabling...")
pycom.lte_modem_en_on_boot(False)
# Join LoRa network
lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU868)
lora.set_battery_level(
255) # We are on battery but have no way to measure this.
# Try to read state from nvram otherwise join a network using OTAA
lora.nvram_restore()
if not lora.has_joined():
lora.join(activation=LoRa.OTAA,
auth=(ubinascii.unhexlify(keys.dev_eui),
ubinascii.unhexlify(keys.app_eui),
ubinascii.unhexlify(keys.app_key)),
timeout=0)
# wait until network joined
while not lora.has_joined():
time.sleep(2.5)
print("Waiting to join...")
class Transceiver:
def __init__(self,
app_eui=0,
app_key=0,
dev_addr=0,
nwk_swkey=0,
app_swkey=0,
dataRate=0,
adr=False,
useSavedState=True):
self.app_eui = app_eui
self.app_key = app_key
self.dev_addr = dev_addr
self.nwk_swkey = nwk_swkey
self.app_swkey = app_swkey
self.dataRate = dataRate
self.adr = adr
self.useSavedState = useSavedState
# Initialize LoRa in LORAWAN mode
self.lora = LoRa(mode=LoRa.LORAWAN,
region=LoRa.EU868,
power_mode=LoRa.TX_ONLY,
adr=self.adr)
# Restore LoRa state from memory (join state, frame counter)
if self.useSavedState:
self.lora.nvram_restore()
else:
self.lora.nvram_erase()
# Only (re)join if not joined before
if not self.lora.has_joined():
if self.app_eui != 0 and self.app_key != 0:
# join a network using OTAA (Over the Air Activation). Start with sf12
self.lora.join(activation=LoRa.OTAA,
auth=(self.app_eui, self.app_key),
dr=0,
timeout=0)
elif self.dev_addr != 0 and self.nwk_swkey != 0 and self.app_swkey != 0:
# join a network using ABP (Authentication By Personalization)
self.lora.join(activation=LoRa.ABP,
auth=(self.dev_addr, self.nwk_swkey,
self.app_swkey))
else:
print("Invalid ABP or OTAA keys")
return
# wait until the module has joined the network (ToDo: timeout to prevent indefinite loop)
while not self.lora.has_joined():
time.sleep(2.5)
print('.', end='')
return
def transmit(self, payload):
self.lora.set_battery_level(self.__getLoraBattLevel())
# create a LoRa socket
self.s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
# set the LoRaWAN data rate
self.s.setsockopt(socket.SOL_LORA, socket.SO_DR, self.dataRate)
# selecting non-confirmed type of messages
self.s.setsockopt(socket.SOL_LORA, socket.SO_CONFIRMED, False)
# make the socket blocking
# (waits for the data to be sent and for the 2 receive windows to expire)
self.s.setblocking(True)
# select port
self.s.bind(1)
# Send the LoRa message
self.s.send(payload)
# make the socket non-blocking
# (because if there's no data received it will block forever...)
self.s.setblocking(False)
# get any data received (if any...)
self.receivePayload = self.s.recv(64)
#print("Store LoRa state in memory")
self.lora.nvram_save()
return
def receive(self):
return self.receivePayload
def getMac(self):
return binascii.hexlify(self.lora.mac()).upper().decode('utf-8')
def stats(self):
return self.lora.stats()
def __getLoraBattLevel(self):
adc = machine.ADC()
battReg = adc.channel(pin='P16', attn=1)
#print('Battery voltage:', battReg() * 3 * 1.334 / 4095)
loraBattLevel = int(battReg() / 14.9)
if loraBattLevel > 254:
loraBattLevel = 0
battVoltage = battReg() * 3 * 1.334 / 4095
#print("Battery level: %d (%f V)" % (loraBattLevel, battVoltage))
return loraBattLevel
print(os.uname())
print("DevEUI: %s" % (binascii.hexlify(lora.mac())))
print("AppEUI: %s" % (binascii.hexlify(app_eui)))
print("AppKey: %s" % (binascii.hexlify(app_key)))
# join a network using OTAA (Over the Air Activation)
lora.join(activation=LoRa.OTAA, auth=(app_eui, app_key), timeout=0, dr=0)
# wait until the module has joined the network
while not lora.has_joined():
pycom.rgbled(0x140000)
time.sleep(2.5)
pycom.rgbled(0x000000)
time.sleep(1.0)
print('Not yet joined...')
print('OTAA joined')
pycom.rgbled(0x001400)
# create a LoRa socket
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
# set the LoRaWAN data rate
s.setsockopt(socket.SOL_LORA, socket.SO_DR, 5)
# battery info for MAC Commands
lora.set_battery_level(254)
machine.main('main.py')
app_swkey = binascii.unhexlify('C8C566468F877992625D3D8DA84896C3')
# remove all the channels
for channel in range(0, 72):
lora.remove_channel(channel)
# set all channels to the same frequency (must be before sending the OTAA join request)
for channel in range(0, 72):
lora.add_channel(channel,
frequency=config.LORA_FREQUENCY,
dr_min=0,
dr_max=3)
# join a network using ABP (Activation By Personalization)
lora.join(activation=LoRa.ABP, auth=(dev_addr, nwk_swkey, app_swkey))
lora.set_battery_level(0)
# create a LoRa socket
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
# set the LoRaWAN data rate
s.setsockopt(socket.SOL_LORA, socket.SO_DR, config.LORA_NODE_DR)
# make the socket blocking
s.setblocking(False)
# update node information
for i in range(200):
pkt = b'PKT #' + bytes([i])
value = "%.2f" % (si.temperature())