def filter_signal_fir(sig, fs, pass_type, f_range, n_cycles=3, n_seconds=None, remove_edges=True,
print_transitions=False, plot_properties=False, return_filter=False):
"""Apply an FIR filter to a signal.
Parameters
----------
sig : array
Time series to be filtered.
fs : float
Sampling rate, in Hz.
pass_type : {'bandpass', 'bandstop', 'lowpass', 'highpass'}
Which kind of filter to apply:
* 'bandpass': apply a bandpass filter
* 'bandstop': apply a bandstop (notch) filter
* 'lowpass': apply a lowpass filter
* 'highpass' : apply a highpass filter
f_range : tuple of (float, float) or float
Cutoff frequency(ies) used for filter, specified as f_lo & f_hi.
For 'bandpass' & 'bandstop', must be a tuple.
For 'lowpass' or 'highpass', can be a float that specifies pass frequency, or can be
a tuple and is assumed to be (None, f_hi) for 'lowpass', and (f_lo, None) for 'highpass'.
n_cycles : float, optional, default: 3
Length of filter, in number of cycles, defined at the 'f_lo' frequency.
This parameter is overwritten by `n_seconds`, if provided.
n_seconds : float, optional
Length of filter, in seconds. This parameter overwrites `n_cycles`.
remove_edges : bool, optional
If True, replace samples within half the kernel length to be np.nan.
print_transitions : bool, optional, default: False
If True, print out the transition and pass bandwidths.
plot_properties : bool, optional, default: False
If True, plot the properties of the filter, including frequency response and/or kernel.
return_filter : bool, optional, default: False
If True, return the filter coefficients of the FIR filter.
Returns
-------
sig_filt : array
Filtered time series.
filter_coefs : 1d array
Filter coefficients of the FIR filter. Only returned if `return_filter` is True.
Examples
--------
Apply a band pass FIR filter to a simulated signal:
>>> from neurodsp.sim import sim_combined
>>> sig = sim_combined(n_seconds=10, fs=500,
... components={'sim_powerlaw': {}, 'sim_oscillation' : {'freq': 10}})
>>> filt_sig = filter_signal_fir(sig, fs=500, pass_type='bandpass', f_range=(1, 25))
Apply a high pass FIR filter to a signal, with a specified number of cycles:
>>> sig = sim_combined(n_seconds=10, fs=500,
... components={'sim_powerlaw': {}, 'sim_oscillation' : {'freq': 10}})
>>> filt_sig = filter_signal_fir(sig, fs=500, pass_type='highpass', f_range=(2, None), n_cycles=5)
"""
# Design filter & check that the length is okay with signal
filter_coefs = design_fir_filter(fs, pass_type, f_range, n_cycles, n_seconds)
check_filter_length(sig.shape[-1], len(filter_coefs))
# Check filter properties: compute transition bandwidth & run checks
check_filter_properties(filter_coefs, 1, fs, pass_type, f_range, verbose=print_transitions)
# Remove any NaN on the edges of 'sig'
sig, sig_nans = remove_nans(sig)
# Apply filter
sig_filt = apply_fir_filter(sig, filter_coefs)
# Remove edge artifacts
if remove_edges:
sig_filt = remove_filter_edges(sig_filt, len(filter_coefs))
# Add NaN back on the edges of 'sig', if there were any at the beginning
sig_filt = restore_nans(sig_filt, sig_nans)
# Plot filter properties, if specified
if plot_properties:
f_db, db = compute_frequency_response(filter_coefs, 1, fs)
plot_filter_properties(f_db, db, fs, filter_coefs)
if return_filter:
return sig_filt, filter_coefs
else:
return sig_filt
def filter_signal_iir(sig,
fs,
pass_type,
f_range,
butterworth_order,
print_transitions=False,
plot_properties=False,
return_filter=False):
"""Apply an IIR filter to a signal.
Parameters
----------
sig : array
Time series to be filtered.
fs : float
Sampling rate, in Hz.
pass_type : {'bandpass', 'bandstop', 'lowpass', 'highpass'}
Which kind of filter to apply:
* 'bandpass': apply a bandpass filter
* 'bandstop': apply a bandstop (notch) filter
* 'lowpass': apply a lowpass filter
* 'highpass' : apply a highpass filter
f_range : tuple of (float, float) or float
Cutoff frequency(ies) used for filter, specified as f_lo & f_hi.
For 'bandpass' & 'bandstop', must be a tuple.
For 'lowpass' or 'highpass', can be a float that specifies pass frequency, or can be
a tuple and is assumed to be (None, f_hi) for 'lowpass', and (f_lo, None) for 'highpass'.
butterworth_order : int
Order of the butterworth filter, if using an IIR filter.
See input 'N' in scipy.signal.butter.
print_transitions : bool, optional, default: False
If True, print out the transition and pass bandwidths.
plot_properties : bool, optional, default: False
If True, plot the properties of the filter, including frequency response and/or kernel.
return_filter : bool, optional, default: False
If True, return the filter coefficients of the IIR filter.
Returns
-------
sig_filt : 1d array
Filtered time series.
filter_coefs : tuple of (1d array, 1d array)
Filter coefficients of the IIR filter, as (b_vals, a_vals).
Only returned if `return_filter` is True.
"""
# Design filter
b_vals, a_vals = design_iir_filter(fs, pass_type, f_range,
butterworth_order)
# Check filter properties: compute transition bandwidth & run checks
check_filter_properties(b_vals,
a_vals,
fs,
pass_type,
f_range,
verbose=print_transitions)
# Remove any NaN on the edges of 'sig'
sig, sig_nans = remove_nans(sig)
# Apply filter
sig_filt = apply_iir_filter(sig, b_vals, a_vals)
# Add NaN back on the edges of 'sig', if there were any at the beginning
sig_filt = restore_nans(sig_filt, sig_nans)
# Plot frequency response, if desired
if plot_properties:
f_db, db = compute_frequency_response(b_vals, a_vals, fs)
plot_frequency_response(f_db, db)
if return_filter:
return sig_filt, (b_vals, a_vals)
else:
return sig_filt
def filter_signal_iir(sig,
fs,
pass_type,
f_range,
butterworth_order,
print_transitions=False,
plot_properties=False,
return_filter=False):
"""Apply an IIR filter to a signal.
Parameters
----------
sig : array
Time series to be filtered.
fs : float
Sampling rate, in Hz.
pass_type : {'bandpass', 'bandstop', 'lowpass', 'highpass'}
Which kind of filter to apply:
* 'bandpass': apply a bandpass filter
* 'bandstop': apply a bandstop (notch) filter
* 'lowpass': apply a lowpass filter
* 'highpass' : apply a highpass filter
f_range : tuple of (float, float) or float
Cutoff frequency(ies) used for filter, specified as f_lo & f_hi.
For 'bandpass' & 'bandstop', must be a tuple.
For 'lowpass' or 'highpass', can be a float that specifies pass frequency, or can be
a tuple and is assumed to be (None, f_hi) for 'lowpass', and (f_lo, None) for 'highpass'.
butterworth_order : int
Order of the butterworth filter, if using an IIR filter.
See input 'N' in scipy.signal.butter.
print_transitions : bool, optional, default: False
If True, print out the transition and pass bandwidths.
plot_properties : bool, optional, default: False
If True, plot the properties of the filter, including frequency response and/or kernel.
return_filter : bool, optional, default: False
If True, return the second order series coefficients of the IIR filter.
Returns
-------
sig_filt : 1d array
Filtered time series.
sos : 2d array
Second order series coefficients of the IIR filter. Has shape of (n_sections, 6).
Only returned if `return_filter` is True.
Examples
--------
Apply a bandstop IIR filter to a simulated signal:
>>> from neurodsp.sim import sim_combined
>>> sig = sim_combined(n_seconds=10, fs=500,
... components={'sim_powerlaw': {}, 'sim_oscillation' : {'freq': 10}})
>>> filt_sig = filter_signal_iir(sig, fs=500, pass_type='bandstop',
... f_range=(55, 65), butterworth_order=7)
"""
# Design filter
sos = design_iir_filter(fs, pass_type, f_range, butterworth_order)
# Check filter properties: compute transition bandwidth & run checks
check_filter_properties(sos,
None,
fs,
pass_type,
f_range,
verbose=print_transitions)
# Remove any NaN on the edges of 'sig'
sig, sig_nans = remove_nans(sig)
# Apply filter
sig_filt = apply_iir_filter(sig, sos)
# Add NaN back on the edges of 'sig', if there were any at the beginning
sig_filt = restore_nans(sig_filt, sig_nans)
# Plot frequency response, if desired
if plot_properties:
f_db, db = compute_frequency_response(sos, None, fs)
plot_frequency_response(f_db, db)
if return_filter:
return sig_filt, sos
else:
return sig_filt