def serial(package, port, baudrate, flowcontrol):
"""Program a device with bootloader that support serial DFU"""
serial_backend = DfuTransportSerial(port, baudrate, flowcontrol)
serial_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(package, dfu_transport=serial_backend)
click.echo("Upgrading target on {1} with DFU package {0}. Flow control is {2}."
.format(package, port, "enabled" if flowcontrol else "disabled"))
try:
with click.progressbar(length=100) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
except Exception as e:
click.echo("")
click.echo("Failed to upgrade target. Error is: {0}".format(e.message))
click.echo("")
click.echo("Possible causes:")
click.echo("- bootloader, SoftDevice or application on target "
"does not match the requirements in the DFU package.")
click.echo("- baud rate or flow control is not the same as in the target bootloader.")
click.echo("- target is not in DFU mode. If using the SDK examples, "
"press Button 4 and RESET and release both to enter DFU mode.")
return False
click.echo("Device programmed.")
return True
def serial(package, port, baudrate, flowcontrol, singlebank, touch):
"""Program a device with bootloader that support serial DFU"""
serial_backend = DfuTransportSerial(port, baudrate, flowcontrol, singlebank, touch)
serial_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(package, dfu_transport=serial_backend)
click.echo("Upgrading target on {1} with DFU package {0}. Flow control is {2}, {3} bank, Touch {4}"
.format(package, port, "enabled" if flowcontrol else "disabled", "Single" if singlebank else "Dual", touch if touch > 0 else "disabled"))
try:
dfu.dfu_send_images()
except Exception as e:
click.echo("")
click.echo("Failed to upgrade target. Error is: {0}".format(e))
traceback.print_exc(file=sys.stdout)
click.echo("")
click.echo("Possible causes:")
click.echo("- Selected Bootloader version does not match the one on Bluefruit device.")
click.echo(" Please upgrade the Bootloader or select correct version in Tools->Bootloader.")
click.echo("- Baud rate must be 115200, Flow control must be off.")
click.echo("- Target is not in DFU mode. Ground DFU pin and RESET and release both to enter DFU mode.")
return False
click.echo("Device programmed.")
return True
def serial(package, port, baudrate, flowcontrol):
"""Program a device with bootloader that support serial DFU"""
serial_backend = DfuTransportSerial(port, baudrate, flowcontrol)
serial_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(package, dfu_transport=serial_backend)
click.echo("Upgrading target on {1} with DFU package {0}. Flow control is {2}."
.format(package, port, "enabled" if flowcontrol else "disabled"))
try:
dfu.dfu_send_images()
except Exception as e:
click.echo("")
click.echo("Failed to upgrade target. Error is: {0}".format(e.message))
click.echo("")
click.echo("Possible causes:")
click.echo("- Bootloader, SoftDevice or Application on target "
"does not match the requirements in the DFU package.")
click.echo("- Baud rate must be 115200, Flow control must be off.")
click.echo("- Target is not in DFU mode. Ground DFU pin and RESET and release both to enter DFU mode.")
return False
click.echo("Device programmed.")
return True
def do_serial(package, port, connect_delay, flow_control, packet_receipt_notification, baud_rate, ping):
if flow_control is None:
flow_control = DfuTransportSerial.DEFAULT_FLOW_CONTROL
if packet_receipt_notification is None:
packet_receipt_notification = DfuTransportSerial.DEFAULT_PRN
if baud_rate is None:
baud_rate = DfuTransportSerial.DEFAULT_BAUD_RATE
if ping is None:
ping = False
logger.info("Using board at serial port: {}".format(port))
serial_backend = DfuTransportSerial(com_port=str(port), baud_rate=baud_rate,
flow_control=flow_control, prn=packet_receipt_notification, do_ping=ping)
serial_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(zip_file_path = package, dfu_transport = serial_backend, connect_delay = connect_delay)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
def serial(package, port, flow_control, packet_receipt_notification,
baud_rate):
"""Perform a Device Firmware Update on a device with a bootloader that supports serial DFU."""
#raise NotImplementedException('Serial transport currently is not supported')
"""Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU."""
if port is None:
click.echo("Please specify serial port.")
return
if flow_control is None:
flow_control = DfuTransportSerial.DEFAULT_FLOW_CONTROL
if packet_receipt_notification is None:
packet_receipt_notification = DfuTransportSerial.DEFAULT_PRN
if baud_rate is None:
baud_rate = DfuTransportSerial.DEFAULT_BAUD_RATE
logger.info("Using board at serial port: {}".format(port))
serial_backend = DfuTransportSerial(com_port=str(port),
baud_rate=baud_rate,
flow_control=flow_control,
prn=packet_receipt_notification)
serial_backend.register_events_callback(DfuEvent.PROGRESS_EVENT,
update_progress)
dfu = Dfu(zip_file_path=package, dfu_transport=serial_backend)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
def do_network(package, outgoing_ip, sock):
logger.info("Doing network ")
udp_backend = DfuTransportUDP(outgoing_ip,
sock,
flow_control=False,
prn=0,
do_ping=True,
timeout=1.0)
udp_backend.register_events_callback(DfuEvent.PROGRESS_EVENT,
update_progress)
dfu = Dfu(zip_file_path=package,
dfu_transport=udp_backend,
connect_delay=3)
dfu.dfu_send_images()
""" if logger.getEffectiveLevel() > logging.INFO:
def ble(package, conn_ic_id, port, connect_delay, name, address, jlink_snr,
flash_connectivity):
"""
Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU.
This requires a second nRF device, connected to this computer, with connectivity firmware
loaded. The connectivity device will perform the DFU procedure onto the target device.
"""
ble_driver_init(conn_ic_id)
if name is None and address is None:
name = 'DfuTarg'
click.echo(
"No target selected. Default device name: {} is used.".format(
name))
if port is None and jlink_snr is not None:
port = get_port_by_snr(jlink_snr)
elif port is None:
port = enumerate_ports()
if port is None:
click.echo(
"\nNo Segger USB CDC ports found, please connect your board.")
return
if flash_connectivity:
flasher = Flasher(serial_port=port, snr=jlink_snr)
if flasher.fw_check():
click.echo("Board already flashed with connectivity firmware.")
else:
click.echo("Flashing connectivity firmware...")
flasher.fw_flash()
click.echo("Connectivity firmware flashed.")
flasher.reset()
time.sleep(1)
logger.info("Using connectivity board at serial port: {}".format(port))
ble_backend = DfuTransportBle(serial_port=str(port),
target_device_name=str(name),
target_device_addr=str(address))
ble_backend.register_events_callback(DfuEvent.PROGRESS_EVENT,
update_progress)
dfu = Dfu(zip_file_path=package,
dfu_transport=ble_backend,
connect_delay=connect_delay)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
def do_serial(package,
port,
connect_delay,
flow_control,
packet_receipt_notification,
baud_rate,
ping,
timeout,
dfuStart=None):
if flow_control is None:
flow_control = DfuTransportSerial.DEFAULT_FLOW_CONTROL
if packet_receipt_notification is None:
packet_receipt_notification = DfuTransportSerial.DEFAULT_PRN
if baud_rate is None:
baud_rate = DfuTransportSerial.DEFAULT_BAUD_RATE
if ping is None:
ping = False
if port is None:
raise Exception("Please specify port!")
if timeout is None:
timeout = DfuTransportSerial.DEFAULT_TIMEOUT
logger.info(
"Using board at serial port: {0}, flow_control: {1}, baud_rate: {2}, ping: {3}"
.format(port, flow_control, baud_rate, ping))
serial_backend = DfuTransportSerial(com_port=str(port),
baud_rate=baud_rate,
flow_control=flow_control,
prn=packet_receipt_notification,
do_ping=ping,
timeout=timeout)
serial_backend.register_events_callback(DfuEvent.PROGRESS_EVENT,
update_progress)
if dfuStart:
logger.info('Enterring DFU mode ...')
send_text_message(str(port), baud_rate, dfuStart, flow_control)
logger.info('Done')
dfu = Dfu(zip_file_path=package,
dfu_transport=serial_backend,
connect_delay=connect_delay)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
logger.info("Device programmed.")
def ble(package, port, name, address, jlink_snr, flash_connectivity):
"""Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU."""
if name is None and address is None:
name = 'DfuTarg'
click.echo("No target selected. Default device name: {} is used.".format(name))
if port is None and jlink_snr is not None:
click.echo("Please specify also serial port.")
return
elif port is None:
port = enumerate_ports()
if flash_connectivity:
flasher = Flasher(serial_port=port, snr = jlink_snr)
if flasher.fw_check():
click.echo("Connectivity already flashed with firmware.")
else:
click.echo("Flashing connectivity ")
flasher.fw_flash()
click.echo("Connectivity flashed")
flasher.reset()
time.sleep(1)
ble_backend = DfuTransportBle(serial_port=str(port),
target_device_name=str(name),
target_device_addr=str(address))
ble_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(zip_file_path = package, dfu_transport = ble_backend)
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
click.echo("Device programmed.")
def whisper(package, device):
whisper_backend = DfuTransportWhisper(device)
whisper_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(zip_file_path = package, dfu_transport = whisper_backend, connect_delay = 0)
logger.info("Updating {} nRF with {}".format(device, package))
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
def ble(package, conn_ic_id, port, name, address, jlink_snr, flash_connectivity):
ble_driver_init(conn_ic_id)
"""Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU."""
if name is None and address is None:
name = 'DfuTarg'
click.echo("No target selected. Default device name: {} is used.".format(name))
if port is None and jlink_snr is not None:
click.echo("Please specify also serial port.")
return
elif port is None:
port = enumerate_ports()
if port is None:
click.echo("\nNo Segger USB CDC ports found, please connect your board.")
return
if flash_connectivity:
flasher = Flasher(serial_port=port, snr = jlink_snr)
if flasher.fw_check():
click.echo("Board already flashed with connectivity firmware.")
else:
click.echo("Flashing connectivity firmware...")
flasher.fw_flash()
click.echo("Connectivity firmware flashed.")
flasher.reset()
time.sleep(1)
logger.info("Using connectivity board at serial port: {}".format(port))
ble_backend = DfuTransportBle(serial_port=str(port),
target_device_name=str(name),
target_device_addr=str(address))
ble_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(zip_file_path = package, dfu_transport = ble_backend)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
def serial(package, port):
"""Perform a Device Firmware Update on a device with a bootloader that supports serial DFU."""
#raise NotImplementedException('Serial transport currently is not supported')
"""Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU."""
if port is None:
click.echo("Please specify serial port.")
return
logger.info("Using board at serial port: {}".format(port))
serial_backend = DfuTransportSerial(com_port=str(port))
serial_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(zip_file_path = package, dfu_transport = serial_backend)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
def serial(package, port):
"""Perform a Device Firmware Update on a device with a bootloader that supports serial DFU."""
#raise NotImplementedException('Serial transport currently is not supported')
"""Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU."""
if port is None:
click.echo("Please specify serial port.")
return
logger.info("Using board at serial port: {}".format(port))
serial_backend = DfuTransportSerial(com_port=str(port))
serial_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(zip_file_path = package, dfu_transport = serial_backend)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
from nordicsemi.dfu.dfu import Dfu
from nordicsemi.dfu.dfu_transport_serial import DfuTransportSerial
transport = DfuTransportSerial("/dev/tty/usbmodem14201", 115200, True, True, False)
a = Dfu("", dfu_transport=transport)
print(a)