def noiseFilter(data_in): N = int(np.ceil((4 / b))) if not N % 2: N += 1 # Make sure that N is odd. n = np.arange(N) # Compute a low-pass filter with cutoff frequency fH. hlpf = np.sinc(2 * fH * (n - (N - 1) / 2.)) hlpf *= np.blackman(N) hlpf = hlpf / np.sum(hlpf) # Compute a high-pass filter with cutoff frequency fL. hhpf = np.sinc(2 * fL * (n - (N - 1) / 2.)) hhpf *= np.blackman(N) hhpf = hhpf / np.sum(hhpf) hhpf = -hhpf hhpf[(N - 1) / 2] += 1 # Convolve both filters. h = np.convolve(hlpf, hhpf) s = np.convolve(data_in, hlpf) fig, ax = plt.subplots() ax.plot(data_in) plt.show() fig1, ax1 = plt.subplots() ax1.plot(s) plt.show() return s
def calculate_couplings_levine(dt: float, w_jk: Matrix,
w_kj: Matrix) -> Matrix:
"""
Compute the non-adiabatic coupling according to:
`Evaluation of the Time-Derivative Coupling for Accurate Electronic
State Transition Probabilities from Numerical Simulations`.
Garrett A. Meek and Benjamin G. Levine.
dx.doi.org/10.1021/jz5009449 | J. Phys. Chem. Lett. 2014, 5, 2351−2356
"""
# Orthonormalize the Overlap matrices
w_jk = np.linalg.qr(w_jk)[0]
w_kj = np.linalg.qr(w_kj)[0]
# Diagonal matrix
w_jj = np.diag(np.diag(w_jk))
w_kk = np.diag(np.diag(w_kj))
# remove the values from the diagonal
np.fill_diagonal(w_jk, 0)
np.fill_diagonal(w_kj, 0)
# Components A + B
acos_w_jj = np.arccos(w_jj)
asin_w_jk = np.arcsin(w_jk)
a = acos_w_jj - asin_w_jk
b = acos_w_jj + asin_w_jk
A = - np.sin(np.sinc(a))
B = np.sin(np.sinc(b))
# Components C + D
acos_w_kk = np.arccos(w_kk)
asin_w_kj = np.arcsin(w_kj)
c = acos_w_kk - asin_w_kj
d = acos_w_kk + asin_w_kj
C = np.sin(np.sinc(c))
D = np.sin(np.sinc(d))
# Components E
w_lj = np.sqrt(1 - (w_jj ** 2) - (w_kj ** 2))
w_lk = -(w_jk * w_jj + w_kk * w_kj) / w_lj
asin_w_lj = np.arcsin(w_lj)
asin_w_lk = np.arcsin(w_lk)
asin_w_lj2 = asin_w_lj ** 2
asin_w_lk2 = asin_w_lk ** 2
t1 = w_lj * w_lk * asin_w_lj
x1 = np.sqrt((1 - w_lj ** 2) * (1 - w_lk ** 2)) - 1
t2 = x1 * asin_w_lk
t = t1 + t2
E_nonzero = 2 * asin_w_lj * t / (asin_w_lj2 - asin_w_lk2)
# Check whether w_lj is different of zero
E1 = np.where(np.abs(w_lj) > 1e-8, E_nonzero, np.zeros(A.shape))
E = np.where(np.isclose(asin_w_lj2, asin_w_lk2), w_lj ** 2, E1)
cte = 1 / (2 * dt)
return cte * (np.arccos(w_jj) * (A + B) + np.arcsin(w_kj) * (C + D) + E)
def marker(): X = np.linspace(-6, 6, 1024) Y1 = np.sinc(X) Y2 = np.sinc(X) + 1 plt.plot(X, Y1, marker = 'o', color = '.75') plt.plot(X, Y2, marker = 'o', color = 'k', markevery = 32) plt.show()
def kernels(image, grad, r3, coefs):
sig1, sig01, sig11, sig21, sig31 = coefs
k_adj = 0
N2 = image.n_pe
N1 = image.N1
ko = np.zeros((N2,N1,N1), 'F')
kp = np.zeros((N2,N2,N1), 'F')
Tf = float(image.T_flat); Tr = float(image.T_ramp); T0 = float(image.T0)
Tl = 2*Tr + Tf
delT = (Tl-2*T0)/N1
#delT = image.dwell_time/1e3
Lx = image.fov_x; Ly = image.fov_y
a0 = grad.gmaG0*(sig01 + r3*sig31)/(2*np.pi)
a1 = grad.gmaG0*Lx*sig11/(2*np.pi)
a2 = grad.gmaG0*Ly*sig21/(2*np.pi)
tn = np.arange(N1)*delT + T0
n1p = np.arange(-N1/2, N1/2)
for n2 in range(N2):
k1t = gtranslate(grad.kx, tn-sig1) * grad.gmaG0/(2*np.pi)
g1t = gtranslate(grad.gx, tn-sig1)
ko[n2] = np.sinc(n1p - (Lx*k1t[:,None]-k_adj) + a1*g1t)
# multiply a0 term to diagonal of n2'th matrix
ko.flat[n2*(N1*N1):(n2+1)*(N1*N1):(N1+1)] *= np.exp(1j*a0*g1t)
for n2p in range(N2):
kp[n2,n2p] = np.sinc(n2p - n2 + a2*g1t)
tn += Tl
#k_adj = k_adj ^ 1
return ko, kp
def compute_premultiplier(N, kernel, kernsize, scale=512):
krange = int(N / 2)
koffset = int((N / 2) * scale)
x = np.arange(-scale * krange, scale * krange) / float(scale)
if kernel == 'lanczos':
a = kernsize / 2
k = np.sinc(x) * np.sinc(x / a) * (np.abs(x) <= a)
elif kernel == 'sinc':
a = kernsize / 2.0
k = np.sinc(x) * (np.abs(x) <= a)
elif kernel == 'linear':
assert kernsize == 2
k = np.maximum(0.0, 1 - np.abs(x))
elif kernel == 'quad':
assert kernsize == 3
k = (np.abs(x) <= 0.5) * (1 - 2 * x**2) + \
((np.abs(x) < 1) * (np.abs(x) > 0.5)) * 2 * (1 - np.abs(x))**2
else:
assert False, 'Unknown kernel type'
sk = np.fft.fftshift(np.fft.ifft(np.fft.ifftshift(k))).real
if N % 2 == 0:
premult = 1.0 / (N * sk[(koffset - krange):(koffset + krange)])
else:
premult = 1.0 / (N * sk[(koffset - krange - 1):(koffset + krange)])
return premult
def test():
import numpy as np
test_fn = "test.h5"
test_f = h5py.File(test_fn, 'w')
A = test_f.create_group('group A1')
B = test_f.create_group('group A2')
C = test_f.create_group('group A11')
B['Simple Data'] = range(25)
xs, ys = np.mgrid[-25:25, -25:25]
rs = np.sqrt(xs ** 2 + ys ** 2)
C['Image Data'] = np.sinc(rs)
C['R Values'] = rs
A.attrs['words'] = 'bonobo bonanza'
A.attrs['number'] = 42
C['Image Data'].attrs['dataset attr'] = 15.5
C['axis1'] = np.linspace(-10, 10, 50)
ts, xs, ys = np.mgrid[0:100, -50:50, -50:50]
rs = np.sqrt(xs ** 2 + ys ** 2)
C['Movie Data'] = np.sinc(rs - ts) * np.exp(-ts / 100)
xs = A['xs'] = np.linspace(0, 10, 300)
A['sin(xs)'] = np.sin(xs)
#A['sin(xs)'].dims.create_scale(A['xs'], "The X Axis Label")
#A['sin(xs)'].dims[0].attach_scale(A['xs'])
main(test_fn)
def lanczos(U,n=10,n2=None):
"""Generate Lanczos kernel for a given shift.
"""
if n2 is None:
n2 = n
siz = size(U)
H = None
if (siz == 2):
U_in = copy(U)
if len(U.shape)==1:
U_in = zeros((1,2))
U_in[0,0]=U[0]
U_in[0,1]=U[1]
H = zeros((2*n+1,2*n2+1))
if (U_in[0,0] == 0) and (U_in[0,1] == 0):
H[n,n2] = 1
else:
i=0
j=0
for i in range(0,2*n+1):
for j in range(0,2*n2+1):
H[i,j] = sinc(U_in[0,0]-(i-n))*sinc((U_in[0,0]-(i-n))/n)*sinc(U_in[0,1]-(j-n))*sinc((U_in[0,1]-(j-n))/n)
else :
H = zeros((2*n+1,))
for i in range(0,2*n):
H[i] = sinc(pi*(U-(i-n)))*sinc(pi*(U-(i-n))/n)
return H
def getEPSFourierCoeffs(self, wl, n, anisotropic=True):
"""Return the Fourier coefficients of eps and eps**-1, orders [-n,n]."""
nood = 2 * n + 1
hmax = nood - 1
if not anisotropic:
# isotropic
rix1 = self.mat1.n(wl)
rix2 = self.mat2.n(wl)
f = self.dc
h = numpy.arange(-hmax, hmax + 1)
EPS = (rix1 ** 2 - rix2 ** 2) * f * \
numpy.sinc(h * f) + rix2 ** 2 * (h == 0)
EPS1 = (rix1 ** -2 - rix2 ** -2) * f * \
numpy.sinc(h * f) + rix2 ** -2 * (h == 0)
return EPS, EPS1
else:
# anisotropic
EPS = numpy.zeros((3, 3, 2 * hmax + 1), dtype=complex)
EPS1 = numpy.zeros_like(EPS)
eps1 = numpy.squeeze(
self.mat1.epsilonTensor(wl)) / EMpy.constants.eps0
eps2 = numpy.squeeze(
self.mat2.epsilonTensor(wl)) / EMpy.constants.eps0
f = self.dc
h = numpy.arange(-hmax, hmax + 1)
for ih, hh in enumerate(h):
EPS[:, :, ih] = (eps1 - eps2) * f * \
numpy.sinc(hh * f) + eps2 * (hh == 0)
EPS1[:, :, ih] = (
scipy.linalg.inv(eps1) - scipy.linalg.inv(eps2)
) * f * numpy.sinc(hh * f) + scipy.linalg.inv(eps2) * (hh == 0)
return EPS, EPS1
def _firls_even(numtaps, bands, desired):
# This function implements an algorithm similar to the one of the
# SciPy `firls` function, but for even-length filters rather than
# odd-length ones. See paper notes entitled "Least squares FIR
# filter design for even N" for derivation. The derivation is
# similar to that of Ivan Selesnick's "Linear-Phase FIR Filter
# Design By Least Squares" (available online at
# http://cnx.org/contents/eb1ecb35-03a9-4610-ba87-41cd771c95f2@7),
# with due alteration of detail for even filter lengths.
bands.shape = (-1, 2)
desired.shape = (-1, 2)
weights = np.ones(len(desired))
M = int(numtaps / 2)
# Compute M x M matrix Q (actually twice Q).
n = np.arange(numtaps)[:, np.newaxis, np.newaxis]
q = np.dot(np.diff(np.sinc(bands * n) * bands, axis=2)[:, :, 0], weights)
Q1 = linalg.toeplitz(q[:M])
Q2 = linalg.hankel(q[1:M + 1], q[M:])
Q = Q1 + Q2
# Compute M-vector b.
k = np.arange(M) + .5
e = bands[1]
b = np.diff(e * np.sinc(e * k[:, np.newaxis])).reshape(-1)
# Compute a (actually half a).
a = np.dot(linalg.pinv(Q), b)
# Compute h.
h = np.concatenate((np.flipud(a), a))
return h
def _aldkrls_ex0():
iN_training = 1e2 # Size of the training data
iN_test = 1e3 # Size of the test data
iSNR = 20 # Noise in the training data [SNR in dB]
# Generate training data
vX = np.random.randn(iN_training)
vY = np.sinc(vX)
vY = vY + np.sqrt(10**(-iSNR/10)*np.var(vY,ddof=1))*np.random.randn(iN_training)
# Generate test data
iStep = (np.max(vX) - np.min(vX))/iN_test
vX_test = np.arange(np.min(vX),np.max(vX),iStep)
vY_test = np.sinc(vX_test)
# -----------------------------------------------------------------
# Train the algorithm
dAldKRLS = krls.aldkrls.init('gauss') # Construct a 'aldKRLSL' object
for i in np.arange(iN_training): # Training loop (loop over the all training samples)
dAldKRLS = krls.aldkrls.train(dAldKRLS , vX[i], vY[i])
# Evaluate the algorithm
vY_est = krls.aldkrls.evaluate(dAldKRLS, vX_test)
# -----------------------------------------------------------------
# Plot
hFig1 = plt.figure(1)
hSubPlot1 = hFig1.add_subplot(111)
hSubPlot1.grid(True)
hSubPlot1.plot(vX_test, vY_est,'-b',label='Generated by the algorithms')
hSubPlot1.plot(vX_test, vY_test,'-g',label='Correct')
vY = vY[np.argsort(vX)]; vX = np.sort(vX); hSubPlot1.plot(vX, vY,'-*r',label='Training')
hSubPlot1.legend()
plt.show(block=True)
def sinc2_2d( width=1.0, height=None, wavelength=1e-6, shape=(512,512), pixelscale=0.010,
obscuration=0.0, center=None):
"""
Parameters
-----------
width : float
Width in meters of the aperture
height : float, optional
height in meters of the aperture. If not specified, the aperture is assumed
to be a square so height=width
"""
if height== None: height=width
halfwidth = float(width)/2
halfheight = float(height)/2
if center is None:
center = (np.asarray(shape)-1.)/2
y, x = np.indices(shape, float)
y -= center[0]
x -= center[1]
y *= pixelscale
x *= pixelscale
k = 2*np.pi / wavelength # wavenumber
alpha = k * x * halfwidth * _ARCSECtoRAD
beta = k * y * halfheight * _ARCSECtoRAD
psf = (np.sinc(alpha))**2 * (np.sinc(beta))**2
return psf
def NoddFcn(F, M, W, L): # N is odd
# Variables :
b0 = 0
m = n.array(range(int(L + 1)))
k = m[1:len(m)]
b = n.zeros(k.shape)
# Run Loop :
for s in range(0, len(F), 2):
m = (M[s + 1] - M[s]) / (F[s + 1] - F[s])
b1 = M[s] - m * F[s]
b0 = b0 + (b1 * (F[s + 1] - F[s]) + m / 2 * (
F[s + 1] * F[s + 1] - F[s] * F[s])) * abs(
n.square(W[round((s + 1) / 2)]))
b = b + (m / (4 * pi * pi) * (
n.cos(2 * pi * k * F[s + 1]) - n.cos(2 * pi * k * F[s])
) / (k * k)) * abs(n.square(W[round((s + 1) / 2)]))
b = b + (F[s + 1] * (m * F[s + 1] + b1) * n.sinc(2 * k * F[s + 1]) - F[
s] * (m * F[s] + b1) * n.sinc(2 * k * F[s])) * abs(n.square(
W[round((s + 1) / 2)]))
b = n.insert(b, 0, b0)
a = (n.square(W[0])) * 4 * b
a[0] = a[0] / 2
aud = n.flipud(a[1:len(a)]) / 2
a2 = n.insert(aud, len(aud), a[0])
h = n.concatenate((a2, a[1:] / 2))
return h
def zinc(f, m=64, n=1):
"""Calculate the magnitude response of a cascade of ``n`` ``m``-th order comb filters.
The magnitude of the filter response is calculated mathematically as:
.. math::
\\left|H(f)\\right| = \\left|\\frac{\\mathrm{sinc}(m f)}{\\mathrm{sinc}(f)}\\right|^n
**Parameters:**
f : ndarray
The frequencies at which the magnitude response is evaluated.
m : int, optional
The order of the comb filters.
n : int, optional
The number of comb filters in the cascade.
**Returns:**
HM : ndarray
The magnitude of the frequency response of the cascade filter.
"""
return np.fabs(np.sinc(m * f) / np.sinc(f)) ** n
def _weight_lanczos_2D(x,y,l,cutoff):
""" Working on
"""
#c=cutoff
r=(x**2+y**2)**0.5
w=np.sinc(r/cutoff)*np.sinc(r/cutoff/l)
w[r>3*l]=0
def __init__(self, power, FWHM_ps, center_wavelength_nm,
time_window_ps = 10., frep_MHz = 100., NPTS = 2**10,
GDD = 0, TOD = 0, chirp2 = 0, chirp3 = 0,
power_is_avg = False):
"""Generate sinc pulse A(t) = sqrt(peak_power[W]) * sin(t/T0)/(t/T0)
centered at wavelength center_wavelength_nm (nm).
The width is given by FWHM_ps, which is the full-width-at-half-maximum
in picoseconds. T0 is equal th FWHM/3.7909885.
time_window_ps sets temporal grid size. Optional GDD and TOD are
in ps^2 and ps^3."""
Pulse.__init__(self, frep_MHz = frep_MHz, n = NPTS)
# make sure we weren't passed mks units
assert (center_wavelength_nm > 1.0)
assert (time_window_ps > 1.0 )
self.set_center_wavelength_nm(center_wavelength_nm)
self.set_time_window_ps(time_window_ps)
T0_ps = FWHM_ps/3.7909885
### Generate pulse
if not power_is_avg:
# numpy.sinc is sin(pi*x)/(pi*x), so we divide by pi
self.set_AT( np.sqrt(power) * np.sinc(self.T_ps/(T0_ps*np.pi)) )
else:
self.set_AT( 1 / np.sinc(np.pi * self.T_ps/(T0_ps*np.pi)) )
self.set_AT(self.AT * np.sqrt( power / ( frep_MHz*1.0e6 * self.calc_epp()) ))
self.chirp_pulse_W(GDD, TOD)
self.chirp_pulse_T(chirp2, chirp3, T0_ps)
def plot_pixel_effect():
fig, axs = plt.subplots(nrows=2, ncols=2, figsize=(8, 8))
#fig = plt.figure()
#ax = fig.add_subplot(111)
out = fft(ifftshift(f_full))
freqs = fftfreq(len(f_full), d=0.01) # spacing, Ang
sfreqs = fftshift(freqs)
taper = gauss_taper(freqs, sigma=0.0496) #Ang, corresponds to 2.89 km/s at 5150A.
tout = out * taper
for ax in axs[:, 0]:
ax.plot(sfreqs, fftshift(tout) / tout[0])
ax.plot(sfreqs, fftshift(taper))
ax.plot(sfreqs, 0.0395 * np.sinc(0.0395 * sfreqs))
ax.plot(sfreqs, 0.0472 * np.sinc(0.0472 * sfreqs))
for ax in axs[:, 1]:
ax.plot(sfreqs, 10 * np.log10(np.abs(fftshift(tout) / tout[0])))
ax.plot(sfreqs, 10 * np.log10(np.abs(fftshift(taper))))
ax.plot(sfreqs, 10 * np.log10(np.abs(0.0395 * np.sinc(0.0395 * sfreqs))))
ax.plot(sfreqs, 10 * np.log10(np.abs(0.0472 * np.sinc(0.0472 * sfreqs))))
axs[0, 0].set_ylabel("Norm amp")
axs[1, 0].set_ylabel("Norm amp")
axs[0, 1].set_ylabel("dB")
axs[1, 1].set_ylabel("dB")
for ax in axs.flatten():
ax.set_xlabel(r"cycles/$\lambda$")
plt.show()
def data_generation(S0,example):
if example==1:
x = np.arange(-1,1,0.05)
y = 0.5+0.25*np.sin(3*np.pi*x)
x = np.atleast_2d(x)
if example==2:
x = np.arange(-1,1,0.05)
y=signal.square(2*np.pi*x,0.5)
x = np.atleast_2d(x)
if example==3:
axisx=np.arange(-2,2,0.1)
axisy=np.arange(-2,2,0.1)
x=np.zeros([S0,1])
i=0
while i<len(axisx):
j=0
while j<len(axisy):
x=np.concatenate((x,np.reshape([axisx[i],axisy[j]],(S0,1))),axis=1)
j+=1
i+=1
X,Y=np.meshgrid(axisx,axisy)
z = np.sinc(X)*np.sinc(Y)
y = z.flatten()
x = np.delete(x,0,1)
if example==4:
Q=400
#x=np.random.normal(0, 0.5, [S0,Q])
x=np.random.uniform(-1,1,(S0,Q))
y=np.zeros([Q,])
i=0
while i<Q:
y[i]=np.sin(2*np.pi*x[0,i])*x[1,i]**2*x[2,i]**3*x[3,i]**4*np.exp(-x[0,i]-x[1,i]-x[2,i]-x[3,i])
i+=1
return x,y
def PointSource(self):
#Schmidt Point Source
DROI = 4.0 *self.DRx #Observation plane region [m]
D1 = self.wvl * self.PropDist / DROI #Central Lobe width [m]
R = self.PropDist #Radius of curvature at wavefront [m
temp = np.exp(-1j*self.k/(2*R) * (self.r1**2)) / (D1**2)
pt = temp * np.sinc((self.x1/D1)) * np.sinc((self.y1/D1)) * np.exp(-(self.r1/(4.0 * D1))**2)
return pt
def calc_window(shape): """Compute fourier-space window function. Like the other fourier-based functions in this module, equi-spaced pixels are assumed. Since the window function is separable, it is returned as an x and y part, such that window = wy[:,None]*wx[None,:].""" wy = np.sinc(np.fft.fftfreq(shape[-2])) wx = np.sinc(np.fft.fftfreq(shape[-1])) return wy, wx
def plot1():
"""plot1"""
X = np.linspace(-6, 6, 1024)
Y1 = np.sinc(X)
Y2 = np.sinc(X) + 1
plt.plot(X, Y1, marker='*', color='b', markevery=32)
plt.plot(X, Y2, marker='^', color='r', markevery=32)
plt.show()
def AutoPowerSpectrum(self,data,window=True):
x = np.fft.fftfreq(N,1./N) # x: 0,1,2,...,512,-511,...,-2,-1
delta_k = np.fft.fftn(data)
if window==True:
window_k = np.sinc(1. / N * x[:,None,None]) * np.sinc(1. / N * x[None,:,None]) * np.sinc(1. / N * x[None,None,:])
Pk = (np.abs(delta_k) / window_k)**2
else :
Pk=np.abs(delta_k)**2
return Pk
def _upsample_columns(X, method=None):
"""
The centre of columns of X, an M-columned matrix, are assumed to have co-ordinates
{ 0, 1, 2, ... , M-1 } which means that the up-sampled matrix's columns should sample
from { -0.25, 0.25, 0.75, ... , M-1.25 }. We can view that as an interleaved set of teo
*convolutions* of X. The first, A, using a kernel equivalent to sampling the { -0.25, 0.75,
1.75, 2.75, ... M-1.25 } columns and the second, B, sampling the { 0.25, 1.25, ... , M-0.75 }
columns.
"""
if method is None:
method = 'lanczos'
X = np.atleast_2d(asfarray(X))
out_shape = list(X.shape)
out_shape[1] *= 2
output = np.zeros(out_shape, dtype=X.dtype)
# Centres of sampling for A and B convolutions
M = X.shape[1]
A_columns = np.linspace(-0.25, M-1.25, M)
B_columns = A_columns + 0.5
# For A columns sample at x = ceil(x) - 0.25 with ceil(x) = { 0, 1, 2, ..., M-1 }
# For B columns sample at x = floor(x) + 0.25 with floor(x) = { 0, 1, 2, ..., M-1 }
int_columns = np.linspace(0, M-1, M)
if method == 'lanczos':
# Lanczos kernel width
a = 3.0
sample_offsets = np.arange(-a, a+1)
# For A: if i = ceil(x) + di, => ceil(x) - i = -0.25 - di
# For B: if i = floor(x) + di, => floor(x) - i = 0.25 - di
l_as = np.sinc(-0.25-sample_offsets)*np.sinc((-0.25-sample_offsets)/a)
l_bs = np.sinc(0.25-sample_offsets)*np.sinc((0.25-sample_offsets)/a)
elif method == 'nearest':
# Nearest neighbour kernel width is 1
sample_offsets = [0,]
l_as = l_bs = [1,]
elif method == 'bilinear':
# Bilinear kernel width is technically 2 but we need to offset the kernels differently
# for A and B columns:
sample_offsets = [-1,0,1]
l_as = [0.25, 0.75, 0]
l_bs = [0, 0.75, 0.25]
else:
raise ValueError('Unknown interpolation mode: {0}'.format(mode))
# Convolve
for di, l_a, l_b in zip(sample_offsets, l_as, l_bs):
columns = reflect(int_columns + di, -0.5, M-0.5).astype(np.int)
output[:,0::2,...] += l_a * X[:,columns,...]
output[:,1::2,...] += l_b * X[:,columns,...]
return output
def compile_2nd_matrix_double_rotor(matrix, Rx2_eigen, smax1, smax2):
"""Generate the rotated 2nd degree Frame Order matrix for the double rotor model.
The cone axis is assumed to be parallel to the z-axis in the eigenframe.
@param matrix: The Frame Order matrix, 2nd degree to be populated.
@type matrix: numpy 9D, rank-2 array
@param Rx2_eigen: The Kronecker product of the eigenframe rotation matrix with itself.
@type Rx2_eigen: numpy 9D, rank-2 array
@param smax1: The maximum torsion angle for the first rotor.
@type smax1: float
@param smax2: The maximum torsion angle for the second rotor.
@type smax2: float
"""
# Zeros.
matrix[:] = 0.0
# Repetitive trig calculations.
sinc_smax1 = sinc(smax1/pi)
sinc_2smax1 = sinc(2.0*smax1/pi)
sinc_2smax1p1 = sinc_2smax1 + 1.0
sinc_2smax1n1 = sinc_2smax1 - 1.0
sinc_smax2 = sinc(smax2/pi)
sinc_2smax2 = sinc(2.0*smax2/pi)
sinc_2smax2p1 = sinc_2smax2 + 1.0
sinc_2smax2n1 = sinc_2smax2 - 1.0
# Diagonal.
matrix[0, 0] = sinc_2smax1 + 1.0
matrix[1, 1] = 2.0 * sinc_smax1 * sinc_smax2
matrix[2, 2] = sinc_smax2 * sinc_2smax1p1
matrix[3, 3] = matrix[1, 1]
matrix[4, 4] = sinc_2smax2p1
matrix[5, 5] = sinc_smax1 * sinc_2smax2p1
matrix[6, 6] = matrix[2, 2]
matrix[7, 7] = matrix[5, 5]
matrix[8, 8] = 0.5 * sinc_2smax1p1 * sinc_2smax2p1
# Off diagonal set 1.
matrix[4, 0] = 0.5 * sinc_2smax1n1 * sinc_2smax2n1
matrix[0, 8] = -sinc_2smax1n1
matrix[8, 0] = -0.5 * sinc_2smax1n1 * sinc_2smax2p1
matrix[4, 8] = -0.5 * sinc_2smax1p1 * sinc_2smax2n1
matrix[8, 4] = -sinc_2smax2n1
# Off diagonal set 2.
matrix[2, 6] = matrix[6, 2] = sinc_smax2 * sinc_2smax1n1
matrix[5, 7] = matrix[7, 5] = sinc_smax1 * sinc_2smax2n1
# Divide by 2.
multiply(0.5, matrix, matrix)
# Rotate and return the frame order matrix.
return rotate_daeg(matrix, Rx2_eigen)
def compile_2nd_matrix_pseudo_ellipse(matrix, Rx2_eigen, theta_x, theta_y, sigma_max):
"""Generate the 2nd degree Frame Order matrix for the pseudo-ellipse.
@param matrix: The Frame Order matrix, 2nd degree to be populated.
@type matrix: numpy 9D, rank-2 array
@param Rx2_eigen: The Kronecker product of the eigenframe rotation matrix with itself.
@type Rx2_eigen: numpy 9D, rank-2 array
@param theta_x: The cone opening angle along x.
@type theta_x: float
@param theta_y: The cone opening angle along y.
@type theta_y: float
@param sigma_max: The maximum torsion angle.
@type sigma_max: float
"""
# The surface area normalisation factor.
fact = 12.0 * pec(theta_x, theta_y)
# Invert.
if fact == 0.0:
fact = 1e100
else:
fact = 1.0 / fact
# Sigma_max part.
if sigma_max == 0.0:
fact2 = 1e100
else:
fact2 = fact / (2.0 * sigma_max)
# Diagonal.
matrix[0, 0] = fact * (4.0*pi*(sinc(2.0*sigma_max/pi) + 2.0) + quad(part_int_daeg2_pseudo_ellipse_00, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[1, 1] = fact * (4.0*pi*sinc(2.0*sigma_max/pi) + quad(part_int_daeg2_pseudo_ellipse_11, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[2, 2] = fact * 2.0*sinc(sigma_max/pi) * (5.0*pi - quad(part_int_daeg2_pseudo_ellipse_22, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[3, 3] = matrix[1, 1]
matrix[4, 4] = fact * (4.0*pi*(sinc(2.0*sigma_max/pi) + 2.0) + quad(part_int_daeg2_pseudo_ellipse_44, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[5, 5] = fact * 2.0*sinc(sigma_max/pi) * (5.0*pi - quad(part_int_daeg2_pseudo_ellipse_55, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[6, 6] = matrix[2, 2]
matrix[7, 7] = matrix[5, 5]
matrix[8, 8] = 4.0 * fact * (2.0*pi - quad(part_int_daeg2_pseudo_ellipse_88, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
# Off diagonal set 1.
matrix[0, 4] = fact * (4.0*pi*(2.0 - sinc(2.0*sigma_max/pi)) + quad(part_int_daeg2_pseudo_ellipse_04, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[4, 0] = fact * (4.0*pi*(2.0 - sinc(2.0*sigma_max/pi)) + quad(part_int_daeg2_pseudo_ellipse_40, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[0, 8] = 4.0 * fact * (2.0*pi - quad(part_int_daeg2_pseudo_ellipse_08, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[8, 0] = fact * (8.0*pi + quad(part_int_daeg2_pseudo_ellipse_80, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[4, 8] = 4.0 * fact * (2.0*pi - quad(part_int_daeg2_pseudo_ellipse_48, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[8, 4] = fact * (8.0*pi - quad(part_int_daeg2_pseudo_ellipse_84, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
# Off diagonal set 2.
matrix[1, 3] = matrix[3, 1] = fact * (4.0*pi*sinc(2.0*sigma_max/pi) + quad(part_int_daeg2_pseudo_ellipse_13, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[2, 6] = matrix[6, 2] = -fact * 4.0 * sinc(sigma_max/pi) * (2.0*pi + quad(part_int_daeg2_pseudo_ellipse_26, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
matrix[5, 7] = matrix[7, 5] = -fact * 4.0 * sinc(sigma_max/pi) * (2.0*pi + quad(part_int_daeg2_pseudo_ellipse_57, -pi, pi, args=(theta_x, theta_y, sigma_max), full_output=1)[0])
# Rotate and return the frame order matrix.
return rotate_daeg(matrix, Rx2_eigen)
def kws(self, offset, aZi, aXi):
'''
Finds 2D source terms to approximate a band-limited point source, based on
Hicks, Graham J. (2002) Arbitrary source and receiver positioning in finite-difference
schemes using Kaiser windowed sinc functions. Geophysics (67) 1, 156-166.
KaiserWindowedSinc(ireg, offset) --> 2D ndarray of size (2*ireg+1, 2*ireg+1)
Input offset is the 2D offsets in fractional gridpoints between the source location and
the nearest node on the modelling grid.
Args:
offset (tuple): Distance of the centre of the source region from the true source
point (in 2D coordinates, in units of cells).
Returns:
np.ndarray: Interpolated source region of size (2*ireg+1, 2*ireg+1)
'''
try:
b = self.HC_KAISER.get(self.ireg)
except KeyError:
print('Kaiser windowed sinc function not implemented for half-width of %d!'%(self.ireg,))
raise
freg = 2*self.ireg+1
xOffset, zOffset = offset
# Grid from 0 to freg-1
Zi, Xi = np.mgrid[:freg,:freg]
Zi, Xi = self.modifyGrid(Zi, Xi, aZi, aXi)
# Distances from source point
dZi = (zOffset + self.ireg - Zi)
dXi = (xOffset + self.ireg - Xi)
# Taper terms for decay function
with warnings.catch_warnings():
warnings.simplefilter('ignore')
tZi = np.nan_to_num(np.sqrt(1 - (dZi / self.ireg)**2))
tXi = np.nan_to_num(np.sqrt(1 - (dXi / self.ireg)**2))
tZi[tZi == np.inf] = 0
tXi[tXi == np.inf] = 0
# Actual tapers for Kaiser window
taperZ = bessi0(b*tZi) / bessi0(b)
taperX = bessi0(b*tXi) / bessi0(b)
# Windowed sinc responses in Z and X
responseZ = np.sinc(dZi) * taperZ
responseX = np.sinc(dXi) * taperX
# Combined 2D source response
result = responseX * responseZ
return result
def _kernel1d(self, u):
""" Calculate the 1d interpolation kernel at each value in array u.
:param u: 1d array of (u_dest-u_src) spanning the footprint of the kernel.
:returns: interpolation kernel values at these grid points
"""
# Normalize Lanczos to unit sum over kernel elements
k = np.sinc(u) * np.sinc(u/self.order)
return k / np.sum(k,axis=1)[:,np.newaxis]
def transformEq(numPoints, coefs, r):
r=0.6
plotBasis = np.linspace(0,1,numPoints)
func = np.ones(numPoints) * coefs[0] * 0.5
m = len(coefs)/2
for i in range(m):
n=i+1
func += np.cos(2*n*np.pi*plotBasis)*coefs[2*i+1] * np.sinc(1.0*n/(m+1))**1 * r**n
func += np.sin(2*n*np.pi*plotBasis)*coefs[2*i+2] * np.sinc(1.0*n/(m+1))**1 * r**n
return func
def Lanczos(self,dx):
"""
Lanczos filter weights
!!!Need to check this!!!
"""
a = self.p
Gtmp = np.sinc(dx) * np.sinc(dx/a)
return Gtmp / np.sum(Gtmp)
def CrossPowerSpectrum(self,data1,data2,window=False):
'''data1:delta,data2:kappa'''
x = np.fft.fftfreq(N,1./N) # x: 0,1,2,...,512,-511,...,-2,-1
delta_k1 = np.fft.fftn(data1)
window_k = np.sinc(1. / N * x[:,None,None]) * np.sinc(1. / N * x[None,:,None]) * np.sinc(1. / N * x[None,None,:])
delta_k1=delta_k1/window_k
delta_k2 = np.fft.fftn(data2)
if window==True:
delta_k2=delta_k2/window_k
Pk=(delta_k1.conjugate()*delta_k2+delta_k2.conjugate()*delta_k1)/2
return Pk.real
def Ormsby(f,t):
assert len(f) == 4, 'Ormsby wavelet needs 4 frequencies as input'
f = np.sort(f) # Ormsby wavelet frequencies must be in increasing order
pif = np.pi*f
den1 = pif[3] - pif[2]
den2 = pif[1] - pif[0]
term1 = (pif[3]*np.sinc(pif[3]*t))**2 - (pif[2]*np.sinc(pif[2]))**2
term2 = (pif[1]*np.sinc(pif[1]*t))**2 - (pif[0]*np.sinc(pif[0]))**2
wav = term1/den1 - term2/den2;
return wav
def func(x, shift, noise):
y = numpy.sinc(x / 2 + shift) + 0.04 * x
for i in range(len(y)):
y[i] += noise * numpy.random.randn(1)
return y
pulse[0] = bit * 2 - 1 # set the first value to either a 1 or -1
pulse_train = np.concatenate(
(pulse_train, pulse)) # add the 8 samples to the signal
fig, ax = plt.subplots(1, figsize=(8, 2)) # 7 is nearly full width
plt.plot(pulse_train, '.-')
plt.grid(True)
fig.savefig('/tmp/time-sync-original-data.svg', bbox_inches='tight')
original_data = pulse_train # save for plotting later
# Create our raised-cosine filter
num_taps = 101
beta = 0.35
Ts = sps # Assume sample rate is 1 Hz, so sample period is 1, so *symbol* period is 8
t = np.arange(-51, 52) # remember it's not inclusive of final number
h = np.sinc(t / Ts) * np.cos(np.pi * beta * t / Ts) / (1 -
(2 * beta * t / Ts)**2)
# Plot filter taps
# plt.figure(1)
# plt.plot(t, h, '.')
# plt.grid(True)
# Filter our signal, in order to apply the pulse shaping
samples = np.convolve(pulse_train, h)
fig, ax = plt.subplots(1, figsize=(7, 3)) # 7 is nearly full width
symbols_to_plot = 10
plt.plot(samples[0:symbols_to_plot * sps + (num_taps - 1) // 2], '.-')
for i in range(symbols_to_plot):
plt.plot([i * sps + num_taps // 2 + 1, i * sps + num_taps // 2 + 1],
[min(samples), max(samples)], 'g')
plt.grid(True)
def generate_cf32_pulse(numSamps, width=5, scaleFactor=0.3):
x = np.linspace(-width, width, numSamps)
pulse = np.sinc(x).astype(np.complex64)
return pulse * scaleFactor
def kepfilter(infile,
outfile,
passband,
datacol='SAP_FLUX',
function='boxcar',
cutoff=1.0,
plot=False,
overwrite=False,
verbose=False,
logfile='kepfilter.log'):
"""
kepfilter -- bandpass filtering of Kepler light curve data
``kepfilter`` applies a bandpass filter to Kepler light curve data. In the
low bandpass option, the data is convolved with a function of
user-specified width. Choices of convolution function are **boxcar**,
**Gaussian** or **sinc**. In the high bandpass option the convolution minus
the median of the convolution is subtracted from the original data. The
filtered data is copied to a new FITS file with the same structure as the
input file.
Parameters
----------
infile : str
The name of a MAST standard format FITS file containing Kepler light
curve data within the first data extension.
outfile : str
The name of the output FITS file. The output file is identical in
format to the input file. The data to be filtered will be overwritten
in the output file by its filtered version.
datacol : str
The name of the data column in the input FITS file to be filtered, e.g.
SAP_FLUX, PDCSAP_FLUX, MOM_CENTR1 etc. A full list of
archived data columns is provided in the Kepler Archive Manual.
function : string
The functional form of the bandpass convolution function.
The options are:
* boxcar
* gauss
* sinc
cutoff : float
The frequency of the bandpass cutoff in units of days-1.
passband : str
The type of filter to be applied. A low bandpass filter will suppress
high-frequency signal shorter than the cutoff. A high bandpass filter
will suppress low-frequency signal longer than the cutoff.
The options are:
* low
* high
plot : bool
Plot the original light curve and the result of the filter?
overwrite : bool
Overwrite the output file? if overwrite is **False** and an existing
file has the same name as outfile then the task will stop with an
error.
verbose : bool
Print informative messages and warnings to the shell and logfile?
logfile : str
Name of the logfile containing error and warning messages.
Examples
--------
.. code-block :: bash
$ kepfilter kplr002436324-2009259160929_llc.fits kepfilter.fits --datacol 'SAP_FLUX' --function 'boxcar'
--plot --verbose --overwrite
.. image :: ../_static/images/api/kepfilter.png
:align: center
"""
## log the call
hashline = '--------------------------------------------------------------'
kepmsg.log(logfile, hashline, verbose)
call = ('KEPFILTER -- ' + ' infile={}'.format(infile) +
' outfile={}'.format(outfile) + ' datacol={}'.format(datacol) +
' function={}'.format(function) + ' cutoff={}'.format(cutoff) +
' passband={}'.format(passband) + ' plot={}'.format(plot) +
' overwrite={}'.format(overwrite) + ' verbose={}'.format(verbose) +
' logfile={}'.format(logfile))
kepmsg.log(logfile, call + '\n', verbose)
## start time
kepmsg.clock('KEPFILTER started at', logfile, verbose)
## overwrite output file
if overwrite:
kepio.overwrite(outfile, logfile, verbose)
if kepio.fileexists(outfile):
errmsg = 'ERROR -- KEPFILTER: {} exists. Use --overwrite'.format(
outfile)
kepmsg.err(logfile, message, verbose)
## open input file
instr = pyfits.open(infile, 'readonly')
tstart, tstop, bjdref, cadence = kepio.timekeys(instr, infile, logfile,
verbose)
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
## fudge non-compliant FITS keywords with no values
instr = kepkey.emptykeys(instr, infile, logfile, verbose)
## read table structure
table = kepio.readfitstab(infile, instr[1], logfile, verbose)
# read time and flux columns
barytime = kepio.readtimecol(infile, table, logfile, verbose)
flux = kepio.readsapcol(infile, table, logfile, verbose)
# filter input data table
try:
nanclean = instr[1].header['NANCLEAN']
except:
naxis2 = 0
for i in range(len(table.field(0))):
if (np.isfinite(barytime[i]) and np.isfinite(flux[i])
and flux[i] != 0.0):
table[naxis2] = table[i]
naxis2 += 1
instr[1].data = table[:naxis2]
kepkey.new('NANCLEAN', True, 'NaN cadences removed from data',
instr[1], outfile, logfile, verbose)
## read table columns
intime = (kepio.readtimecol(infile, instr[1].data, logfile, verbose) +
bjdref)
indata = kepio.readfitscol(infile, instr[1].data, datacol, logfile,
verbose) / cadenom
## define data sampling
tr = 1.0 / (cadence / 86400)
timescale = 1.0 / (cutoff / tr)
## define convolution function
if function == 'boxcar':
filtfunc = np.ones(int(np.ceil(timescale)))
elif function == 'gauss':
timescale /= 2
dx = np.ceil(timescale * 10 + 1)
filtfunc = kepfunc.gauss([1.0, dx / 2 - 1.0, timescale],
np.linspace(0, dx - 1, dx))
elif function == 'sinc':
dx = np.ceil(timescale * 12 + 1)
fx = (np.linspace(0, dx - 1, dx) - dx / 2 + 0.5) / timescale
filtfunc = np.sinc(fx)
filtfunc /= np.sum(filtfunc)
## pad time series at both ends with noise model
ave, sigma = (np.mean(indata[:len(filtfunc)]),
np.std(indata[:len(filtfunc)]))
padded = np.append(
kepstat.randarray(
np.ones(len(filtfunc)) * ave,
np.ones(len(filtfunc)) * sigma), indata)
ave, sigma = (np.mean(indata[-len(filtfunc):]),
np.std(indata[-len(filtfunc):]))
padded = np.append(
padded,
kepstat.randarray(
np.ones(len(filtfunc)) * ave,
np.ones(len(filtfunc)) * sigma))
## convolve data
convolved = np.convolve(padded, filtfunc, 'same')
## remove padding from the output array
if function == 'boxcar':
outdata = convolved[len(filtfunc):-len(filtfunc)]
else:
outdata = convolved[len(filtfunc):-len(filtfunc)]
## subtract low frequencies
if passband == 'high':
outmedian = np.median(outdata)
outdata = indata - outdata + outmedian
## comment keyword in output file
kepkey.history(call, instr[0], outfile, logfile, verbose)
## clean up x-axis unit
intime0 = float(int(tstart / 100) * 100.0)
if intime0 < 2.4e6: intime0 += 2.4e6
ptime = intime - intime0
xlab = 'BJD $-$ {}'.format(intime0)
## clean up y-axis units
pout = indata * 1.0
pout2 = outdata * 1.0
nrm = len(str(int(np.nanmax(pout)))) - 1
pout = pout / 10**nrm
pout2 = pout2 / 10**nrm
ylab = '10$^{}$ {}'.format(nrm, 'e$^-$ s$^{-1}$')
## data limits
xmin = ptime.min()
xmax = ptime.max()
ymin = np.nanmin(pout)
ymax = np.nanmax(pout)
xr = xmax - xmin
yr = ymax - ymin
ptime = np.insert(ptime, [0], [ptime[0]])
ptime = np.append(ptime, [ptime[-1]])
pout = np.insert(pout, [0], [0.0])
pout = np.append(pout, 0.0)
pout2 = np.insert(pout2, [0], [0.0])
pout2 = np.append(pout2, 0.0)
## plot light curve
if plot:
plt.figure()
plt.clf()
## plot filtered data
ax = plt.axes([0.06, 0.1, 0.93, 0.87])
plt.gca().xaxis.set_major_formatter(
plt.ScalarFormatter(useOffset=False))
plt.gca().yaxis.set_major_formatter(
plt.ScalarFormatter(useOffset=False))
plt.plot(ptime, pout, color='#ff9900', linestyle='-', linewidth=1.0)
plt.fill(ptime, pout, color='#ffff00', linewidth=0.0, alpha=0.2)
if passband == 'low':
plt.plot(ptime[1:-1],
pout2[1:-1],
color='#0000ff',
linestyle='-',
linewidth=1.0)
else:
plt.plot(ptime,
pout2,
color='#0000ff',
linestyle='-',
linewidth=1.0)
plt.fill(ptime, pout2, color='#0000ff', linewidth=0.0, alpha=0.2)
plt.xlabel(xlab, {'color': 'k'})
plt.ylabel(ylab, {'color': 'k'})
plt.xlim(xmin - xr * 0.01, xmax + xr * 0.01)
if ymin >= 0.0:
plt.ylim(ymin - yr * 0.01, ymax + yr * 0.01)
else:
plt.ylim(1.0e-10, ymax + yr * 0.01)
plt.grid()
# render plot
plt.show()
## write output file
for i in range(len(outdata)):
instr[1].data.field(datacol)[i] = outdata[i]
instr.writeto(outfile)
## close input file
instr.close()
## end time
kepmsg.clock('KEPFILTER completed at', logfile, verbose)
def firwin(
numtaps,
cutoff,
width=None,
window="hamming",
pass_zero=True,
scale=True,
nyq=1.0,
fs=None,
gpupath=True,
):
"""
FIR filter design using the window method.
This function computes the coefficients of a finite impulse response
filter. The filter will have linear phase; it will be Type I if
`numtaps` is odd and Type II if `numtaps` is even.
Type II filters always have zero response at the Nyquist frequency, so a
ValueError exception is raised if firwin is called with `numtaps` even and
having a passband whose right end is at the Nyquist frequency.
Parameters
----------
numtaps : int
Length of the filter (number of coefficients, i.e. the filter
order + 1). `numtaps` must be odd if a passband includes the
Nyquist frequency.
cutoff : float or 1D array_like
Cutoff frequency of filter (expressed in the same units as `fs`)
OR an array of cutoff frequencies (that is, band edges). In the
latter case, the frequencies in `cutoff` should be positive and
monotonically increasing between 0 and `fs/2`. The values 0 and
`fs/2` must not be included in `cutoff`.
width : float or None, optional
If `width` is not None, then assume it is the approximate width
of the transition region (expressed in the same units as `fs`)
for use in Kaiser FIR filter design. In this case, the `window`
argument is ignored.
window : string or tuple of string and parameter values, optional
Desired window to use. See `cusignal.get_window` for a list
of windows and required parameters.
pass_zero : {True, False, 'bandpass', 'lowpass', 'highpass', 'bandstop'},
optional
If True, the gain at the frequency 0 (i.e. the "DC gain") is 1.
If False, the DC gain is 0. Can also be a string argument for the
desired filter type (equivalent to ``btype`` in IIR design functions).
.. versionadded:: 1.3.0
Support for string arguments.
scale : bool, optional
Set to True to scale the coefficients so that the frequency
response is exactly unity at a certain frequency.
That frequency is either:
- 0 (DC) if the first passband starts at 0 (i.e. pass_zero
is True)
- `fs/2` (the Nyquist frequency) if the first passband ends at
`fs/2` (i.e the filter is a single band highpass filter);
center of first passband otherwise
nyq : float, optional
*Deprecated. Use `fs` instead.* This is the Nyquist frequency.
Each frequency in `cutoff` must be between 0 and `nyq`. Default
is 1.
fs : float, optional
The sampling frequency of the signal. Each frequency in `cutoff`
must be between 0 and ``fs/2``. Default is 2.
gpupath : bool, Optional
Optional path for filter design. gpupath == False may be desirable if
filter sizes are small.
Returns
-------
h : (numtaps,) ndarray
Coefficients of length `numtaps` FIR filter.
Raises
------
ValueError
If any value in `cutoff` is less than or equal to 0 or greater
than or equal to ``fs/2``, if the values in `cutoff` are not strictly
monotonically increasing, or if `numtaps` is even but a passband
includes the Nyquist frequency.
See Also
--------
firwin2
firls
minimum_phase
remez
Examples
--------
Low-pass from 0 to f:
>>> import cusignal
>>> numtaps = 3
>>> f = 0.1
>>> cusignal.firwin(numtaps, f)
array([ 0.06799017, 0.86401967, 0.06799017])
Use a specific window function:
>>> cusignal.firwin(numtaps, f, window='nuttall')
array([ 3.56607041e-04, 9.99286786e-01, 3.56607041e-04])
High-pass ('stop' from 0 to f):
>>> cusignal.firwin(numtaps, f, pass_zero=False)
array([-0.00859313, 0.98281375, -0.00859313])
Band-pass:
>>> f1, f2 = 0.1, 0.2
>>> cusignal.firwin(numtaps, [f1, f2], pass_zero=False)
array([ 0.06301614, 0.88770441, 0.06301614])
Band-stop:
>>> cusignal.firwin(numtaps, [f1, f2])
array([-0.00801395, 1.0160279 , -0.00801395])
Multi-band (passbands are [0, f1], [f2, f3] and [f4, 1]):
>>> f3, f4 = 0.3, 0.4
>>> cusignal.firwin(numtaps, [f1, f2, f3, f4])
array([-0.01376344, 1.02752689, -0.01376344])
Multi-band (passbands are [f1, f2] and [f3,f4]):
>>> cusignal.firwin(numtaps, [f1, f2, f3, f4], pass_zero=False)
array([ 0.04890915, 0.91284326, 0.04890915])
"""
if gpupath:
pp = cp
else:
pp = np
cutoff = pp.atleast_1d(cutoff) / float(nyq)
# print("cutoff", cutoff.size)
# Check for invalid input.
if cutoff.ndim > 1:
raise ValueError("The cutoff argument must be at most "
"one-dimensional.")
if cutoff.size == 0:
raise ValueError("At least one cutoff frequency must be given.")
if cutoff.min() <= 0 or cutoff.max() >= 1:
raise ValueError("Invalid cutoff frequency: frequencies must be "
"greater than 0 and less than nyq.")
if pp.any(pp.diff(cutoff) <= 0):
raise ValueError("Invalid cutoff frequencies: the frequencies "
"must be strictly increasing.")
if width is not None:
# A width was given. Find the beta parameter of the Kaiser window
# and set `window`. This overrides the value of `window` passed in.
atten = kaiser_atten(numtaps, float(width) / nyq)
beta = kaiser_beta(atten)
window = ("kaiser", beta)
pass_nyquist = bool(cutoff.size & 1) ^ pass_zero
if pass_nyquist and numtaps % 2 == 0:
raise ValueError("A filter with an even number of coefficients must "
"have zero response at the Nyquist rate.")
# Insert 0 and/or 1 at the ends of cutoff so that the length of cutoff
# is even, and each pair in cutoff corresponds to passband.
cutoff = pp.hstack(([0.0] * pass_zero, cutoff, [1.0] * pass_nyquist))
# `bands` is a 2D array; each row gives the left and right edges of
# a passband.
bands = cutoff.reshape(-1, 2)
if gpupath:
win = get_window(window, numtaps, fftbins=False)
h, hc = _firwin_kernel(win, numtaps, bands, bands.shape[0], scale)
if scale:
s = cp.sum(hc)
h /= s
else:
try:
win = signal.get_window(window, numtaps, fftbins=False)
except NameError:
raise RuntimeError("CPU path requires SciPy Signal's get_windows.")
# Build up the coefficients.
alpha = 0.5 * (numtaps - 1)
m = np.arange(0, numtaps) - alpha
h = 0
for left, right in bands:
h += right * np.sinc(right * m)
h -= left * np.sinc(left * m)
h *= win
# Now handle scaling if desired.
if scale:
# Get the first passband.
left, right = bands[0]
if left == 0:
scale_frequency = 0.0
elif right == 1:
scale_frequency = 1.0
else:
scale_frequency = 0.5 * (left + right)
c = np.cos(np.pi * m * scale_frequency)
s = np.sum(h * c)
h /= s
return h
y1 = f(x - T * n)
sumY = sumY + y1
if ax is not None:
ax.plot(x, y1, color='C0', linestyle=':')
ax.fill_between(x, 0, y1, facecolor='#999999', alpha=.5)
if n != 0:
y2 = f(x + T * n)
sumY = sumY + y2
if ax is not None:
ax.plot(x, y2, color='C0', linestyle=':')
ax.fill_between(x, 0, y2, facecolor='#999999', alpha=.5)
return x, sumY
fsinc = lambda x, rate: np.sinc(x * rate)
f = lambda x: .4 * np.sin(.12 * (x - 3) + 1) + np.sin(.2 * (x - 2)) + np.cos(
.5 * x) + np.sin(.7 * x + 3) + 1
T = 1
M = 2
# g for downsampling, M is the down rate
g = lambda x, M: np.where(
x <= -M, 0,
np.where(x < 0, 1.0 / (M**2) * x + 1.0 / M,
np.where(x < M, 1.0 / M - 1.0 / (M**2) * x, 0)))
g2 = lambda x: g(x, 2)
g3 = lambda x: g(x, 3)
lowpass = lambda x: np.where(abs(x) > 2, 0, 1)
x = np.arange(-20, 20, T)
y = f(x)
def eyediagram():##funcion utilizada para exponer los diagramas de ojos de los pulsos
alpha_ojo = 0.9999999999999##valor cercano a 1 entrega un diagrama mas limpio
coseno_alzado2 = (np.sinc(t1) * np.cos(alpha_ojo*np.pi*t1))/(1-(4*alpha_ojo*alpha_ojo*t1*t1))
T=5###valor del periodo para el tren de impulsos
tren2=np.array(range(10000*T), dtype="int")
##tren para valores de periodo impar
contador=floor(T/2);
for x in range(0,10000*T):
if (contador==0):
tren2[x]=randint(0,1)
contador=floor(T/2)*2
if (tren2[x]==0):
tren2[x]=-1
else:
tren2[x]=0
contador=contador-1
resultado3=np.convolve(sinc,tren2,'same')##resultado de la convolucion del pulso sinc con el respectivo tren de impulsos
resultado4=np.convolve(coseno_alzado2,tren2,'same')##resultado de la convolucion del pulso coseno alzado con el respectivo tren de impulsos
##primero se exponen los diagramas de ojo resultantes solo de la convolucion
ojo_sinc=np.reshape(resultado3,(2*T,len(resultado3)/(2*T)), order='F')
ojo_coseno_alzado=np.reshape(resultado4,(2*T,len(resultado4)/(2*T)), order='F')
plt.subplot(2,1,1)
plt.title('Diagrama de ojo pulso Sinc')
plt.xlabel('Tiempo(s)')
plt.ylabel('Amplitud')
plt.grid(True)
plt.plot(ojo_sinc,'b')
plt.subplot(2,1,2)
plt.title('Diagrama de ojo pulso coseno alzado')
plt.xlabel('Tiempo(s)')
plt.ylabel('Amplitud')
plt.grid(True)
plt.plot(ojo_coseno_alzado,'b')
plt.show()
##ahora se expondran los diagramas de ojo con ruido awgn agregado
# Numero de datos a utilizar
N = 50000
# razon señal ruido
SNR = 20
# Create some data with noise and a sinusoidal
# variation.
y = np.random.normal(0.0, 1.0/SNR, N) + 1.0
ruido_sinc= y+resultado3
ruido_rc=y+resultado4
ojo_ruido_sinc=np.reshape(ruido_sinc,(2*T,len(ruido_sinc)/(2*T)), order='F')
ojo_ruido_coseno_alzado=np.reshape(ruido_rc,(2*T,len(ruido_rc)/(2*T)), order='F')
plt.subplot(2,1,1)
plt.title('Diagrama de ojo pulso Sinc con ruido')
plt.xlabel('Tiempo(s)')
plt.ylabel('Amplitud')
plt.grid(True)
plt.plot(ojo_ruido_sinc,'b')
plt.subplot(2,1,2)
plt.title('Diagrama de ojo pulso coseno alzado con ruido')
plt.xlabel('Tiempo(s)')
plt.ylabel('Amplitud')
plt.grid(True)
plt.plot(ojo_ruido_coseno_alzado,'b')
plt.show()
Inputfilename='/home/zhm/tides20/0.000halo.bin' Outputfilename='/home/mtx/data/tide/halo_new/outdata/log_data/' print Inputfilename print Outputfilename ########################################load data######################################## halo_x=Tide.LoadData(filename=Inputfilename) #####################add later of wiener filter and smooth###################### Kf=2*np.pi/(L) x = np.fft.fftfreq(N,1./N) # x: 0,1,2,...,512,-511,...,-2,-1 sum=halo_x.sum() print sum halo_x=(N**3)/sum*halo_x halo_k=np.fft.fftn(halo_x) #******************************************************************************** k=(x[:,None,None]**2.+x[None,:,None]**2.+x[None,None,:]**2.)**(1./2.) window_k = np.sinc( 1./N* x[:,None,None]) * np.sinc( 1./N * x[None,:,None]) * np.sinc( 1./N * x[None,None,:]) Ph=L**3/N**6*np.abs(halo_k)**2 Tide.SaveDataHdf5(Ph,Outputfilename+'0.000halo00_Pk_halo.hdf5') Ph=Ph*(np.exp(-0.5*(Kf*Kf)*k*k*sigma**2)/window_k)**2 W=Ph/(Ph+(L**3)/sum) #wiener filter #******************************************************************************** bias=np.sqrt(2.32) del halo_x halo_k=halo_k*W ########################## smooth and window function########################### #k=(x[:,None,None]**2.+x[None,:,None]**2.+x[None,None,:]**2.)**(1./2.) #window_k = np.sinc( 1./N* x[:,None,None]) * np.sinc( 1./N * x[None,:,None]) * np.sinc( 1./N * x[None,None,:]) halo_k=halo_k*(np.exp(-0.5*(Kf*Kf)*k*k*sigma**2))/window_k deltag=np.fft.ifftn(halo_k).real
wi = mu0 * c0 / np.sqrt(er)
# Interaction region dimensions (most simple case)
de = 8 * le
da = 8 * la
Lx = da
Ly = de
# Interaction region dimensions (refined)
#de = 10*le
#da = 10*la
#Lx = da
#Ly = de
# Cuboid phi, 2D
Phi_c = (np.sinc(Lx / 2 / np.pi *
(k - k * np.cos(phi_m) + pm * q * np.cos(alpha_m))) *
np.sinc(Ly / 2 / np.pi *
(-k * np.sin(phi_m) + pm * q * np.sin(alpha_m))))
# Parallelogram phi, 2D
Phi_p = (np.sinc(da / 2 / np.pi / np.sin(alpha_m) *
(k - k * np.cos(phi_m) + pm * q * np.cos(alpha_m))) *
np.sinc(de / 2 / np.pi / np.tan(alpha_m) *
(k - k *
(np.cos(phi_m) + np.sin(phi_m) * np.tan(alpha_m)) + pm * q *
(np.cos(alpha_m) + np.sin(alpha_m) * np.tan(alpha_m)))))
# Normal component of Poynting vector, cuboid
# This is the same as the magnitude for a circular boundary
Sn_c = (0.5 / wi * Ei0**2 * er**2 * k**3 * ph**2 * p0**2 / 8 / np.pi / r /
kbm**2 * Lx**2 * Ly**2 * Phi_c**2)
def sinc_cov(x, x_prime, variance=1., w=1.):
"""Sinc covariance function."""
r = np.linalg.norm(x - x_prime, 2)
return variance * np.sinc(np.pi * w * r)
def create_convolved_profiles(self, path): #{{{
if (os.path.isfile(path + 'convolved_profiles.npz')
and not self.num.debugging) or (self.convolved_signal_arr
is not None):
raise RuntimeError('Convolved profiles already exist.')
if (self.signal_arr is not None and self.theta_out_arr is not None):
pass
else:
if os.path.isfile(path + 'profiles.npz'):
f = np.load(path + 'profiles.npz')
self.theta_out_arr = f['theta_out']
self.signal_arr = f['signal']
else:
raise RuntimeError('Profiles have not already been computed.')
if (self.num.Wiener_filter is not None):
print 'Using Wiener filter ' + self.num.Wiener_filter
self.convolve_with_Wiener = True
else:
self.convolve_with_Wiener = False
if (self.num.pixel_radius is not None):
print 'Convolving with circular pixel.'
self.convolve_with_circular_pixel = True
else:
self.convolve_with_circular_pixel = False
if (self.num.pixel_sidelength is not None):
print 'Convolving with quadratic pixel.'
self.convolve_with_quadratic_pixel = True
else:
self.convolve_with_quadratic_pixel = False
if self.convolve_with_circular_pixel and self.convolve_with_quadratic_pixel:
raise RuntimeError(
'You want to convolve with circular AND quadratic pixels.')
if self.num.gaussian_kernel_FWHM is not None:
print 'Applying additional effective Gaussian smoothing.'
if self.convolve_with_quadratic_pixel:
if os.path.isfile('./constants/quadratic_pixel_W_ell.npz'):
print 'Reading W_ell for quadratic pixel from file.'
f = np.load('./constants/quadratic_pixel_W_ell.npz')
pixel_ell = f['ell']
pixel_W_ell = f['W_ell']
else:
print 'Computing W_ell for quadratic pixel.'
pixel_ell = np.logspace(-2., 3., base=10., num=int(1e5))
pixel_W_ell = np.empty(len(pixel_ell))
for ii in xrange(len(pixel_ell)):
B_ell_phi = lambda phi: np.sinc(0.5 * pixel_ell[
ii] * np.cos(phi))**1. * np.sinc(0.5 * pixel_ell[ii] *
np.sin(phi))**1.
pixel_W_ell[ii], _ = quad(B_ell_phi, 0., np.pi / 4.)
pixel_W_ell *= 4. / np.pi
np.savez(path + 'quadratic_pixel_W_ell.npz',
ell=pixel_ell,
W_ell=pixel_W_ell)
quadratic_pixel_window_function_interp = interp1d(
pixel_ell,
pixel_W_ell,
kind='quadratic',
bounds_error=False,
fill_value=(1., 0.))
quadratic_pixel_window_function = lambda ell: quadratic_pixel_window_function_interp(
ell)
DHTobj = GSL_DHT.DiscreteHankelTransform(self.num.Npoints_theta)
DHTobj.init(0, 1.)
self.convolved_signal_arr = np.empty(
self.signal_arr.shape
) # assumes that theta is the last (3rd) direction
for ii in xrange(self.signal_arr.shape[0]): # logM-loop
start = time()
for jj in xrange(self.signal_arr.shape[1]): # z-loop
_, reci_signal = DHTobj.apply(self.signal_arr[ii, jj, :])
Window = np.ones(self.num.Npoints_theta)
if self.convolve_with_circular_pixel:
Window *= profiles.__circular_pixel_window_function(
self.num.scaled_reci_theta_grid *
self.num.pixel_radius / self.theta_out_arr[ii, jj])
elif self.convolve_with_quadratic_pixel:
Window *= quadratic_pixel_window_function(
self.num.scaled_reci_theta_grid * 0.5 *
self.num.pixel_sidelength / self.theta_out_arr[ii, jj])
else:
warn(
'You called create_convolved_profiles without actually convolving',
UserWarning)
if self.num.gaussian_kernel_FWHM is not None:
Window *= profiles._gaussian_pixel_window_function(
self.num.scaled_reci_theta_grid *
self.num.gaussian_kernel_FWHM /
self.theta_out_arr[ii, jj])
if self.convolve_with_Wiener:
Window *= self.num.Wiener_filter(
self.num.scaled_reci_theta_grid /
self.theta_out_arr[ii, jj])
reci_signal = reci_signal * Window
_, self.convolved_signal_arr[ii,
jj, :] = DHTobj.apply(reci_signal)
self.convolved_signal_arr[ii, jj, :] *= (
self.num.scaled_reci_theta_grid[-1]**2.)
d = np.diff(self.convolved_signal_arr[ii, jj, :])
end = time()
if (ii % 4 == 0) and self.num.verbose:
print str(
(end - start) / 60. *
(self.signal_arr.shape[0] -
ii)) + ' minutes remaining in create_convolved_profiles.'
np.savez(path + 'convolved_profiles.npz',
theta_out=self.theta_out_arr,
convolved_signal=self.convolved_signal_arr)
def generate_mfp2DSym(**argv):
#load data
data = load_data('mfp')
Kacc = data['Kacc']
mfp_bulk = data['mfp']
kappa_bulk = Kacc[-1]
kappa_bulk = np.zeros_like(Kacc)
kappa_bulk[0] = Kacc[0]
for n in range(len(Kacc) - 1):
kappa_bulk[n + 1] = Kacc[n + 1] - Kacc[n]
#pruning--
I = np.where(mfp_bulk > 0)
kappa_bulk = kappa_bulk[I]
mfp_bulk = mfp_bulk[I]
kappa = np.eye(3) * np.sum(kappa_bulk)
#Get options----
n_phi = int(argv.setdefault('n_phi', 48))
n_mfp = int(argv.setdefault('n_mfp', 50))
n_theta = int(argv.setdefault('n_theta', 24))
nm = n_phi * n_mfp
#Create sampled MFPs
n_mfp_bulk = len(mfp_bulk)
mfp_sampled = np.logspace(min([-2, np.log10(min(mfp_bulk) * 0.99)]),
np.log10(max(mfp_bulk) * 1.01),
n_mfp) #min MFP = 1e-2 nm
#Polar Angle---------
Dphi = 2 * np.pi / n_phi
#phi = np.linspace(Dphi/2.0,2.0*np.pi-Dphi/2.0,n_phi,endpoint=True)
phi = np.linspace(0, 2.0 * np.pi, n_phi, endpoint=False)
#--------------------
#Azimuthal Angle------------------------------
Dtheta = np.pi / n_theta / 2.0
theta = np.linspace(Dtheta / 2.0, np.pi / 2.0 - Dtheta / 2.0, n_theta)
dtheta = 2.0 * np.sin(Dtheta / 2.0) * np.sin(theta)
domega = np.outer(dtheta, Dphi * np.ones(n_phi))
#Compute directions---
polar = np.array([np.sin(phi), np.cos(phi), np.zeros(n_phi)]).T
azimuthal = np.array([np.sin(theta), np.sin(theta), np.zeros(n_theta)]).T
direction = np.einsum('ij,kj->ikj', azimuthal, polar)
#Compute average---
ftheta = (1 - np.cos(2 * theta) * np.sinc(Dtheta / np.pi)) / (
np.sinc(Dtheta / 2 / np.pi) * (1 - np.cos(2 * theta)))
fphi = np.sinc(Dphi / 2.0 / np.pi)
polar_ave = polar * fphi
azimuthal_ave = np.array(
[ftheta * np.sin(theta), ftheta * np.sin(theta),
np.zeros(n_theta)]).T
direction_ave = np.einsum('ij,kj->ikj', azimuthal_ave, polar_ave)
direction_int = np.einsum('ijl,ij->ijl', direction_ave, domega)
#------------------------------------------------------
n_mfp_bulk = len(mfp_bulk)
n_mfp = argv.setdefault('n_mfp', 100)
mfp = np.logspace(np.log10(max([min(mfp_bulk), 1e-11])),
np.log10(max(mfp_bulk) * 1.01), n_mfp)
n_mfp = len(mfp)
temp_coeff_p, temp_coeff = np.zeros((2, n_mfp, n_phi))
kappa_directional_p, kappa_directional = np.zeros((2, n_mfp, n_phi, 3))
#suppression_p,suppression = np.zeros((2,n_mfp,n_phi,n_mfp_bulk))
dirr = np.einsum('tpi,tp->tpi', direction_ave[:, :, :2], domega)
kdp = np.zeros((n_mfp, n_phi, 2))
kd = np.zeros((n_mfp, n_phi, 2))
tcp = np.zeros((n_mfp, n_phi))
tc = np.zeros((n_mfp, n_phi))
p = np.arange(n_phi)
g1 = kappa_bulk / mfp_bulk
g2 = kappa_bulk / mfp_bulk / mfp_bulk
g3 = ftheta * np.sin(theta)
n_tot = n_mfp_bulk
block = n_tot // comm.size
rr = range(block *
comm.rank, n_tot) if comm.rank == comm.size - 1 else range(
block * comm.rank, block * (comm.rank + 1))
#change to mfp
for t in range(n_theta):
for m in rr:
(m1, a1, m2, a2) = get_linear_indexes(mfp, mfp_bulk[m] * g3[t])
tmp = g1[m] * dirr[t]
kdp[m1] += a1 * tmp
kdp[m2] += a2 * tmp
#Temperature
tmp = g2[m] * domega[t]
tcp[m1] += a1 * tmp
tcp[m2] += a2 * tmp
#Suppression
#tmp = dirr[t,:,0]/mfp_bulk[m]
#sp[m1,:,m] += a1 * tmp
#sp[m2,:,m] += a2 * tmp
comm.Allreduce([kdp, MPI.DOUBLE], [kd, MPI.DOUBLE], op=MPI.SUM)
comm.Allreduce([tcp, MPI.DOUBLE], [tc, MPI.DOUBLE], op=MPI.SUM)
#comm.Allreduce([sp,MPI.DOUBLE],[s,MPI.DOUBLE],op=MPI.SUM)
kd *= 2 * 3 / 4.0 / np.pi
#s *= 3*2/4.0/np.pi
tc /= np.sum(tc)
#Test for bulk---
if comm.rank == 0:
kappa_bulk = np.zeros((2, 2))
for m in range(n_mfp):
for p in range(n_phi):
kappa_bulk += mfp[m] * np.outer(kd[m, p], polar_ave[p, :2])
#replicate bulk values---
#Wod = np.tile(tc,(nm,1))
#angle_map = np.arange(n_phi)
#angle_map = np.repeat(angle_map,n_mfp)
#repeat angle---
#kappa_directional[:,:,2] = 0 #Enforce zeroflux on z (for visualization purposed)
#F = np.einsum('m,pi->mpi',mfp,polar_ave)
rhs_average = mfp_sampled * mfp_sampled / 2
a = np.zeros((3, 3))
for i in range(len(polar_ave)):
a += np.outer(polar_ave[i],
polar_ave[i]) / 2 / np.pi * 2 * np.pi / n_phi
rhs_average = mfp_sampled * mfp_sampled
rhs_average *= a[0, 0]
#Final----
return {'tc':tc,\
'sigma':kd,\
'kappa':kappa,\
'mfp_average':rhs_average*1e18,\
'VMFP':polar_ave[:,:2],\
'mfp_sampled':mfp,\
'sampling': np.array([n_phi,n_theta,n_mfp]),\
'model':np.array([5]),\
'suppression':np.zeros(1),\
'kappam':kappa_bulk}
import numpy as np
import matplotlib.pyplot as plt
x = np.linspace(0, 7, 100)
for i in range(7):
yi = np.sinc(x - i)
plt.plot(x, yi, c='blue')
plt.xlim([0, 7])
plt.ylim([-0.5, 1])
plt.xlabel('Subcarrier')
plt.ylabel('Amplitude')
plt.grid()
plt.show()
import numpy as np
from numpy import sin, linspace, pi,fft
from scipy import fft, arange, ifft, signal
import matplotlib.pyplot as plt
from random import randint
from math import floor
###valores por defecto
t1 = linspace(-16,16, 101)
sinc = np.sinc(t1)
alpha = 0.22##valor predeterminado
coseno_alzado = (np.sinc(t1) * np.cos(alpha*np.pi*t1))/(1-(4*alpha*alpha*t1*t1))
def tiempo_feecuencia():##funcion que expone los pulsos en el dominio de su tiempo y frecuencia
##pulsos en el tiempo
plt.subplot(2,1,1)
plt.title('Funcion sinc en el tiempo')
plt.xlabel('Tiempo(s)')
plt.ylabel('Amplitud')
plt.grid(True)
plt.plot(t1,sinc, 'r')
plt.subplot(2,1,2)
plt.title('Funcion coseno alzado en el tiempo en el tiempo')
plt.xlabel('Tiempo(s)')
plt.ylabel('Amplitud')
def f(x):
return np.sinc(x * 10 - 5).sum(axis=1)[:, None]
def generate_data_2(n_samples=15, stddev=0.2):
x_samples = np.linspace(0, 2 * np.pi, num=n_samples)
y_samples = np.sinc(x_samples - np.pi) + np.random.normal(scale=stddev,
size=n_samples)
return x_samples, y_samples
def fourier2_(w, tau):
"""tau * sinc(tau*W/(2*pi))"""
return tau * np.sinc(tau * w / (2 * np.pi))
def setUp(self):
self.X = np.random.rand(10, 2)
self.y = np.sinc(self.X * 10 - 5).sum(axis=1)
self.model = RandomForest()
self.model.train(self.X, self.y)
import numpy as np
import matplotlib.pyplot as plt
import lwz
import pdb
from scipy import signal
pi = np.pi
n = 256
x = np.arange(n)
nn = 30
fwhm = 5.
num = np.arange(nn)
ii = np.zeros(1)
db = np.sinc(0.05 * (x - 127))
dm0 = np.zeros(n)
dm0[127] = 1.
dm0[95] = 0.5
dm = signal.fftconvolve(dm0, db, mode='same')
for i in num:
if i == 0:
ii = np.array([i]) + 1
mch = np.where(np.abs(dm) == np.max(np.abs(dm)))
mch = (mch[0])[0]
xm = x[mch]
xmall = xm
cb0 = lwz.gauss(x, 127.5, fwhm / 2.35)
bili = np.max(db) / np.max(cb0)
""" ====================== Variable Declaration ========================== """
l = 0 #lower bound on x
u = 10 #upper bound on x
N = 50 #number of samples to generate
gVar = .25 #variance of error distribution
M = 3 #regression model order
""" ======================= Generate Training Data ======================= """
data_uniform = np.array(generateUniformData(N, l, u, gVar)).T
x1 = data_uniform[:, 0]
t1 = data_uniform[:, 1]
x2 = np.arange(l, u, 0.001) #get equally spaced points in the xrange
t2 = np.sinc(x2) #compute the true function value
""" ======================== Train the Model ============================= """
w = fitdata(x1, t1, M)
x3 = np.arange(l, u, 0.001) #get equally spaced points in the xrange
X = np.array([x3**m for m in range(w.size)]).T
t3 = X @ w #compute the predicted value
plotData(x1, t1, x2, t2, x3, t3,
['Training Data', 'True Function', 'Estimated\nPolynomial'])
print(w)
""" ======================== Generate Test Data =========================== """
"""This is where you should generate a validation testing data set. This
should be generated with different parameters than the training data! """
""" ======================== Test the Model ============================== """
""" This is where you should test the validation set with the trained model """
import matplotlib.pyplot as plt
import numpy as np
from moviepy.video.io.bindings import mplfig_to_npimage
import moviepy.editor as mpy
# DRAW A FIGURE WITH MATPLOTLIB
duration = 2
fig_mpl, ax = plt.subplots(1,figsize=(5,3), facecolor='white')
xx = np.linspace(-2,2,200) # the x vector
zz = lambda d: np.sinc(xx**2)+np.sin(xx+d) # the (changing) z vector
ax.set_title("Elevation in y=0")
ax.set_ylim(-1.5,2.5)
line, = ax.plot(xx, zz(0), lw=3)
# ANIMATE WITH MOVIEPY (UPDATE THE CURVE FOR EACH t). MAKE A GIF.
def make_frame_mpl(t):
line.set_ydata( zz(2*np.pi*t/duration)) # <= Update the curve
return mplfig_to_npimage(fig_mpl) # RGB image of the figure
animation =mpy.VideoClip(make_frame_mpl, duration=duration)
animation.write_videofile("myHolidays_edited.mp4",fps=25)
# animation.write_gif("sinc_mpl.gif", fps=20)
def spatialStab(fullTime,
fullSpace,
spaceStep,
frequency,
timeStep,
plasmaFreq,
resonantFreq,
gamma,
lim_Of_Stability=np.pi / 2):
fT = fullTime
fS = fullSpace
sp = spaceStep
los = (np.pi) / 2
frq = frequency
rad = 2 * np.pi * frq
twoPi = rad / frq
c0 = sci.speed_of_light
tim = timeStep
print("timesteps: ", tim, rad * tim)
if rad * tim > np.pi / 2 and frq <= 5e9:
print("unstable timestep", rad * tim, tim)
sys.exit()
sw = np.sinc(np.pi * frq * tim)
pf = plasmaFreq
oldPf = pf
rf = resonantFreq
es = (pf**2) / (rf**2) - 1
gam = gamma
sqN = (rad**2 * sw**2 - es * rf**2 * np.cos(rad * tim) +
1.0j * gam * rad * sw)
sqD = (rad**2 * sw**2 - rf**2 * np.cos(rad * tim) + 1.0j * gam * rad * sw)
arg = (rad / c0) * (sp / 2) * sw * np.sqrt(sqN / sqD)
ans = (2 / sp) * np.arcsin(arg)
kNum = abs(ans)
epsNum = (((pf)**2))
epsDom = (rf**2 - (rad**2) - 1j * gam * rad)
epsilon = 1 + (epsNum / epsDom)
refr = np.sqrt(abs(np.real(epsilon)))
print(epsilon, "eps stability")
print("refr", refr)
matAdjNum = c0 * tim * np.sin((kNum * refr * sp) / 2)
matAdjDen = refr * sp * np.sin((kNum * c0 * tim) / 2)
fix = matAdjNum / matAdjDen
print(fix, "fix")
pf = np.sqrt(abs(fix)) * pf
vpNum = rad / kNum
lamCont = c0 / frq
lamDisc = (twoPi) / kNum
diff = abs(lamCont - lamDisc)
print("Adjusted plasmaF vs original plasmaF", abs((oldPf - pf) / oldPf))
#print(lamCont, lamDisc, diff, kNum, vpNum, c0, "lamCont, Disc, diff, kNum, diff in Vp, c0")
if kNum * sp > los: # HIGH FREQ LIMIT
print("unstable, wave is not resolved:", kNum * sp, kNum,
abs(frq - (c0 / (twoPi / kNum))))
sys.exit()
print("domain should be: ", (lamDisc * 5) / sp)
if kNum * sp * fS < (5 * lamDisc):
print("unstable because domain too small,", (lamDisc * 5) / sp)
sys.exit()
return lamCont, lamDisc, diff, pf, fix
# -*- coding: utf-8 -*-
from __future__ import unicode_literals
import numpy as np
import scipy.interpolate as si
import matplotlib.pyplot as mp
min_x, max_x = -2.5, 2.5
con_x = np.linspace(min_x, max_x, 1001)
con_y = np.sinc(con_x)
dis_x = np.linspace(min_x, max_x, 11)
dis_y = np.sinc(dis_x)
# 线性插值
linear = si.interp1d(dis_x, dis_y)
lin_x = np.linspace(min_x, max_x, 51)
lin_y = linear(lin_x)
# 三次样条插值
cubic = si.interp1d(dis_x, dis_y, kind='cubic')
cub_x = np.linspace(min_x, max_x, 51)
cub_y = cubic(cub_x)
mp.figure('Interpolation', facecolor='lightgray')
mp.subplot(221)
mp.title('Continuous', fontsize=16)
mp.ylabel('y', fontsize=12)
mp.tick_params(labelsize=10)
mp.grid(linestyle=':')
mp.plot(con_x, con_y, c='hotpink',
label='Continuous')
mp.legend()
mp.subplot(222)
mp.title('Discrete', fontsize=16)
mp.tick_params(labelsize=10)
mp.grid(linestyle=':')
def delay(self, duration=1, channel=0, filter_length=2048):
"""
Add a delay to one channel.
Arguments:
duration (int | float | array-like): duration of the delay in seconds (given a float) or samples (given
an int). Given an array with the same length as the sound, each sample is delayed by the
corresponding number of seconds. This option is used by in `slab.Binaural.itd_ramp`.
channel (int): The index of the channel to add the delay to
filter_length (int): Must be and even number. determines the accuracy of the reconstruction when
using fractional sample delays. Defaults to 2048, or the sound length for shorter signals.
Returns:
(slab.Signal): a copy of the instance with the specified delay.
"""
new = copy.deepcopy(self)
if channel >= self.n_channels:
raise ValueError(
'Channel must be smaller than number of channels in sound!')
if filter_length % 2:
raise ValueError('Filter_length must be even!')
if self.n_samples < filter_length: # reduce the filter_length to the sound length of short signals
filter_length = self.n_samples - 1 if self.n_samples % 2 else self.n_samples # make even
center_tap = int(filter_length / 2)
t = numpy.array(range(filter_length))
if isinstance(
duration,
(int, float, numpy.int64, numpy.float64)): # just a constant delay
duration = Signal.in_samples(duration, self.samplerate)
if duration > self.n_samples:
raise ValueError(
"Duration of the delay cant be greater longer then the sound!"
)
x = t - duration + 1
window = 0.54 - 0.46 * numpy.cos(
2 * numpy.pi * (x + 0.5) / filter_length) # Hamming window
if numpy.abs(duration) < 1e-10:
tap_weight = numpy.zeros_like(t)
tap_weight[center_tap] = 1
else:
tap_weight = window * numpy.sinc(x - center_tap)
new.data[:, channel] = numpy.convolve(self.data[:, channel],
tap_weight,
mode='same')
else: # dynamic delay
if len(duration) != self.n_samples:
ValueError('Duration shorter or longer than sound!')
duration *= self.samplerate # assuming vector in seconds, convert to samples
padding = numpy.zeros(center_tap)
# for zero-padded convolution (potential edge artifacts!)
sig = numpy.concatenate((padding, new.channel(channel), padding),
axis=None)
for i, current_delay in enumerate(duration):
x = t - current_delay
window = 0.54 - 0.46 * numpy.cos(
2 * numpy.pi * (x + 0.5) / filter_length) # Hamming window
if numpy.abs(current_delay) < 1e-10:
tap_weight = numpy.zeros_like(t)
tap_weight[center_tap] = 1
else:
tap_weight = window * numpy.sinc(x - center_tap)
sig_portion = sig[i:i + filter_length]
# sig_portion and tap_weight have the same length, so the valid part of the convolution is just
# one sample, which gets written into the sound at the current index
new.data[i, channel] = numpy.convolve(sig_portion,
tap_weight,
mode='valid')
return new
NTaps = int(a)
elif o in ("-b", "--sub-bands"):
NSubBands = int(a)
elif o in ("-d", "--data-type"):
DataType = a
elif o in ("-p", "--no-plot"):
Plot = False
else:
PrintUsage(ProgName)
sys.exit(1)
M = NTaps * NFFT
# the filter-coefficient-generation section -->
X = numpy.array([(float(i) / NFFT) - (float(NTaps) / 2) for i in range(M)])
PFBCoeff = numpy.sinc(X) * numpy.hanning(M)
# <-- the filter-coefficient-generation section
# create conversion map
if ("signedchar" == DataType):
Map = numpy.zeros(256, numpy.float32)
for i in range(0, 128):
Map[i] = float(i) / 128
for i in range(128, 256):
Map[i] = -(float(256 - i) / 128)
# 32-bit (float) coefficients
PFBCoeffFloat32 = numpy.zeros(M * NSubBands, numpy.float32)
# 8-bit (signedchar) coefficients
if ("signedchar" == DataType):
PFBCoeffInt8 = numpy.zeros(M * NSubBands, numpy.int8)
def undulator_field_dfl_SERVAL(dfl, L_w, sig_x=0, sig_y=0, sig_xp=0, sig_yp=0, k_support = 'intensity', s_support='conv_intensities', showfig=False, seed=None):
filePath = '/home/andrei/Documents/diploma/Diploma/images/'
_logger.info('Generating undulator field with Serval algorithm')
w_0 = 2*np.pi * speed_of_light / dfl.xlamds
if showfig:
plot_dfl_2Dsf(dfl, scale='um', domains='sf', savefig=True,
fig_name = '1-X_noise', filePath=filePath)
# plot_dfl(dfl, line_off_xy = False, fig_name = '1-X_noise')
dfl.to_domain('sf')
x, y = np.meshgrid(dfl.scale_x(), dfl.scale_y())#, indexing='ij')
mask_xy_ebeam = np.exp(- x**2 / 4 / sig_x**2 - y**2 / 4 / sig_y**2) # 4 because amplitude, not intensity
# mask_xy_ebeam = np.exp(- x**2 / 2 / sig_x**2 - y**2 / 2 / sig_y**2) # 4 because amplitude, not intensity
mask_xy_ebeam /= np.sum(mask_xy_ebeam)
# mask_xy_radiation = np.sqrt((1j*(np.pi - 2*special.sici(w_0*(x**2 + y**2)/speed_of_light/L_w)[0]))**2)
# mask_xy_radiation = 1j*(np.pi - 2*special.sici(w_0*(x**2 + y**2)/speed_of_light/L_w)[0])
# mask_xy_radiation = (1j*(np.pi - 2*special.sici(w_0*(x**2 + y**2)/speed_of_light/L_w)[0]))**2
if s_support == 'conv_intensities':
_logger.info(ind_str +'s_support == "conv"')
mask_xy_radiation = 1j*(np.pi - 2*scipy.special.sici(w_0*(x**2 + y**2)/speed_of_light/L_w)[0])
mask_xy = scipy.signal.fftconvolve(mask_xy_radiation**2, mask_xy_ebeam**2, mode='same')
mask_xy = np.sqrt(mask_xy)
elif s_support == 'conv_amplitudes':
_logger.info(ind_str +'s_support == "conv"')
mask_xy_radiation = 1j*(np.pi - 2*scipy.special.sici(w_0*(x**2 + y**2)/speed_of_light/L_w)[0])
mask_xy = scipy.signal.fftconvolve(mask_xy_radiation, mask_xy_ebeam, mode='same')
else:
_logger.info(ind_str +'s_support == "beam"')
mask_xy = mask_xy_ebeam
_logger.info(ind_str +'Multiplying by real space mask')
dfl.fld *= mask_xy
# dfl.fld *= np.sqrt(mask_xy)
_logger.info(2*ind_str +'done')
if showfig:
# plot_dfl(dfl, domains='s', line_off_xy = False, fig_name = '2-X_e-beam-size')
plot_dfl_2Dsf(dfl, scale='um', domains='sf', savefig=True,
fig_name = '2-X_e-beam-size', filePath=filePath)
# plot_dfl(dfl, domains='k', line_off_xy = False, fig_name = '2-X_e-beam-size')
plot_dfl_2Dsf(dfl, scale='um', domains='kf', savefig=True,
fig_name = '2-X_e-beam-divergence', filePath=filePath)
dfl.to_domain('kf')
k_x, k_y = np.meshgrid(dfl.scale_x(), dfl.scale_y())
mask_kxky_ebeam = np.exp(-k_y**2 / 4 / sig_yp**2 - k_x**2 / 4 / sig_xp**2 ) # 4 because amplitude, not intensity
# mask_kxky_ebeam = np.exp(-k_y**2 / 2 / sig_yp**2 - k_x**2 / 2 / sig_xp**2 ) # 2 because intensity
mask_kxky_ebeam /= np.sum(mask_kxky_ebeam)
# mask_kxky_radiation = np.sqrt((np.sinc(w_0 * L_w * (k_x**2 + k_y**2) / 4 / speed_of_light / np.pi))**2)# Geloni2018 Eq.3, domega/omega = 2dgamma/gamma, divided by pi due to np.sinc definition
# mask_kxky_radiation = (np.sinc(w_0 * L_w * (k_x**2 + k_y**2) / 4 / speed_of_light / np.pi))# Geloni2018 Eq.3, domega/omega = 2dgamma/gamma, divided by pi due to np.sinc definition
mask_kxky_radiation = np.sinc(w_0 * L_w * (k_x**2 + k_y**2) / 4 / speed_of_light / np.pi)# Geloni2018 Eq.3, domega/omega = 2dgamma/gamma, divided by pi due to np.sinc definition
if k_support == 'intensity':
_logger.info(ind_str +'k_support == "intensity"')
mask_kxky = scipy.signal.fftconvolve(mask_kxky_ebeam**2, mask_kxky_radiation**2, mode='same')
mask_kxky = np.sqrt(mask_kxky[np.newaxis, :, :])
mask_kxky /= np.sum(mask_kxky)
elif k_support == 'amplitude':
_logger.info(ind_str +'k_support == "amplitude"')
mask_kxky = scipy.signal.fftconvolve(mask_kxky_ebeam, mask_kxky_radiation, mode='same')
mask_kxky /= np.sum(mask_kxky)
else:
raise ValueError('k_support should be either "intensity" or "amplitude"')
# dfl.fld *= mask_kxky[np.newaxis, :, :]
_logger.info(ind_str +'Multiplying by inverse space mask')
dfl.fld *= mask_kxky
_logger.info(2*ind_str +'done')
if showfig:
# plot_dfl(dfl, domains='s', fig_name = '3-X_radaition_size')
plot_dfl_2Dsf(dfl, scale='um', domains='sf', savefig=True,
fig_name = '3-X_radaition_size', filePath=filePath)
# plot_dfl(dfl, domains='k', fig_name = '3-X_radiation_divergence')
plot_dfl_2Dsf(dfl, scale='um', domains='kf', savefig=True,
fig_name = '3-X_radaition_divergence', filePath=filePath)
return dfl
def time_fun(t):
return np.sinc(omega * (t - 50e-12))
def cascade(screenpos,i,nletters):
v = np.array([0,-1])
d = lambda t : 1 if t<0 else abs(np.sinc(t)/(1+t**4))
return lambda t: screenpos+v*400*d(t-0.15*i)
def run(num=1, T=500):
X = pd.read_csv('X_set%s.csv' % num, header=None).as_matrix()
Y = pd.read_csv('y_set%s.csv' % num, header=None).as_matrix().flatten()
Z = pd.read_csv('z_set%s.csv' % num, header=None).as_matrix().flatten()
N, D = X.shape
print X.shape, Y.shape, Z.shape
a0 = 1e-16
b0 = 1e-16
e0 = 1
f0 = 1
# params for q(w) - doesn't matter what we set it to, we'll update this first
C = np.eye(D)
mu = np.zeros(D)
# params for q(lambda)
e = e0
f = f0
# params for q(alpha)
a = np.ones(D) * a0
b = np.ones(D) * b0
a0ones = np.ones(D) * a0
# objective
L = np.empty(T)
for t in xrange(T):
# update q(w)
C = np.linalg.inv(np.diag(1.0 * a / b) + (1.0 * e / f) * X.T.dot(X))
mu = C.dot((1.0 * e / f) * X.T.dot(Y))
# update q(alpha)
a = a0ones + 0.5
b = b0 + 0.5 * (np.diag(C) + mu * mu)
# for k in xrange(D):
# a[k] = a0 + 0.5
# b[k] = b0 + 0.5*(C[k,k] + mu[k]*mu[k])
# update q(lambda)
e = e0 + N / 2.0
sum_for_f = 0
# for i in xrange(N):
# delta = Y[i] - X[i].dot(mu)
# sum_for_f += delta*delta + X[i].dot(C).dot(X[i])
delta = Y - X.dot(mu)
sum_for_f = delta.dot(delta) + np.trace(X.dot(C).dot(X.T))
f = f0 + 0.5 * sum_for_f
# update L
L[t] = objective(X, Y, C, mu, a, b, e, f, a0, b0, e0, f0)
if t % 20 == 0:
print "t:", t
if num == 3:
print "L:", L[t]
# plot 1/E[alpha]
plt.plot(b / a)
plt.show()
# 1/E[lambda]
print "1/E[lambda]:", f / e
# plot L
plt.plot(L)
plt.show()
Yhat = X.dot(mu)
plt.plot(Z, Yhat)
plt.scatter(Z, Y)
plt.plot(Z, 10 * np.sinc(Z))
plt.show()
# This should give a Fourier transform with a frequency spectrum that is
# entirely real, starts at 1 and goes to 0 at 0.5 the sample rate
def est_autocorr(x):
""" Estimate autocorrelation by inverse transforming the powerspectrum """
X = np.fft.fft(x)
S = X * np.conj(X)
r = np.fft.ifft(X)
return r
N = common.get_env('N', default=512, conv=int)
n = np.arange(N)
t = np.arange(-N / 2 + 0.5, N / 2)
t_eval = np.concatenate((np.arange(N / 2), np.arange(1, N / 2 + 1)[::-1] * -1))
a = common.get_env('a', default=0.5, conv=float)
x = a * np.power(np.sinc(t_eval * a), 2)
X = np.fft.fft(x)
r = est_autocorr(x)
fig, axs = plt.subplots(3, 1)
axs[0].plot(n, x)
axs[1].plot(n, np.real(X))
axs[2].plot(n, np.abs(r))
# It really seems that the square of the sinc is its own autocorrelation
# function
print(np.sum(np.abs(x - r)))
plt.show()
