def callResetSettings(self):
if ConfirmDialog.confirmed(parent=self,
message="Confirm Reset of the Fields?"):
self.resetSettings()
while self.tab_crystals.count() > 0:
self.tab_crystals.removeTab(0)
tab_first_crystal = oasysgui.widgetBox(self.tab_crystals,
addToLayout=0,
margin=4)
tab_second_crystal = oasysgui.widgetBox(self.tab_crystals,
addToLayout=0,
margin=4)
self.crystal_1_box = CrystalBox(
dcm=self,
parent=tab_first_crystal,
has_finite_dimensions=self.has_finite_dimensions[0],
dimensions=self.dimensions[0])
self.crystal_2_box = CrystalBox(
dcm=self,
parent=tab_second_crystal,
has_finite_dimensions=self.has_finite_dimensions[1],
dimensions=self.dimensions[1])
self.tab_crystals.addTab(tab_first_crystal, "First Crystal")
self.tab_crystals.addTab(tab_second_crystal, "Second Crystal")
self.setupUI()
def __init__(self):
super().__init__()
self.runaction = widget.OWAction("Write Shadow File", self)
self.runaction.triggered.connect(self.write_file)
self.addAction(self.runaction)
self.setFixedWidth(590)
self.setFixedHeight(190)
left_box_1 = oasysgui.widgetBox(self.controlArea, "Shadow File Selection", addSpace=True, orientation="vertical",
width=570, height=110)
gui.checkBox(left_box_1, self, 'is_automatic_run', 'Automatic Execution')
gui.separator(left_box_1, height=10)
figure_box = oasysgui.widgetBox(left_box_1, "", addSpace=True, orientation="horizontal", width=550, height=35)
self.le_beam_file_name = oasysgui.lineEdit(figure_box, self, "beam_file_name", "Shadow File Name",
labelWidth=120, valueType=str, orientation="horizontal")
self.le_beam_file_name.setFixedWidth(330)
gui.button(figure_box, self, "...", callback=self.selectFile)
button = gui.button(self.controlArea, self, "Write Shadow File", callback=self.write_file)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def __init__(self, show_automatic_box=True):
super().__init__(show_automatic_box)
self.main_tabs = oasysgui.tabWidget(self.mainArea)
plot_tab = oasysgui.createTabPage(self.main_tabs, "Plots")
out_tab = oasysgui.createTabPage(self.main_tabs, "Output")
view_box = oasysgui.widgetBox(plot_tab, "Plotting Style", addSpace=False, orientation="horizontal")
view_box_1 = oasysgui.widgetBox(view_box, "", addSpace=False, orientation="vertical", width=350)
self.view_type_combo = gui.comboBox(view_box_1, self, "view_type", label="Select level of Plotting",
labelWidth=220,
items=["Detailed Plot", "Preview", "None"],
callback=self.set_PlotQuality, sendSelectedValue=False, orientation="horizontal")
self.tab = []
self.tabs = oasysgui.tabWidget(plot_tab)
self.initializeTabs()
self.enableFootprint(False)
self.shadow_output = oasysgui.textArea(height=580, width=800)
out_box = gui.widgetBox(out_tab, "System Output", addSpace=True, orientation="horizontal")
out_box.layout().addWidget(self.shadow_output)
def createTabThickness(self):
tab_thick = oasysgui.createTabPage(self.tabs_setting, "Thickness Error")
input_box = oasysgui.widgetBox(tab_thick, "Thickness Error Files", addSpace=True, orientation="vertical", height=390, width=self.CONTROL_AREA_WIDTH-20)
gui.comboBox(input_box, self, "crl_material_data", label="Material Properties from", labelWidth=180,
items=["Chemical Formula", "Absorption Parameters"],
callback=self.set_CrlMaterialData,
sendSelectedValue=False, orientation="horizontal")
self.input_box_1 = oasysgui.widgetBox(input_box, "", addSpace=False, orientation="vertical", width=self.CONTROL_AREA_WIDTH-40)
self.input_box_2 = oasysgui.widgetBox(input_box, "", addSpace=False, orientation="vertical", width=self.CONTROL_AREA_WIDTH-40)
oasysgui.lineEdit(self.input_box_1, self, "crl_material", "Chemical Formula", labelWidth=260, valueType=str, orientation="horizontal")
oasysgui.lineEdit(self.input_box_2, self, "crl_delta", "Refractive Index (\u03b4)", labelWidth=260, valueType=float, orientation="horizontal")
self.set_CrlMaterialData()
self.files_area = oasysgui.textArea(height=265)
input_box.layout().addWidget(self.files_area)
self.refresh_files_text_area()
oasysgui.lineEdit(input_box, self, "crl_scaling_factor", "Thickness Error Scaling Factor", labelWidth=260, valueType=float, orientation="horizontal")
def __init__(self):
super().__init__()
self.runaction = widget.OWAction("Write Shadow File", self)
self.runaction.triggered.connect(self.write_file)
self.addAction(self.runaction)
self.setFixedWidth(590)
self.setFixedHeight(180)
left_box_1 = oasysgui.widgetBox(self.controlArea, "Shadow File Selection", addSpace=True, orientation="vertical",
width=570, height=100)
gui.checkBox(left_box_1, self, 'is_automatic_run', 'Automatic Execution')
gui.separator(left_box_1, height=10)
figure_box = oasysgui.widgetBox(left_box_1, "", addSpace=True, orientation="horizontal", width=550, height=50)
self.le_beam_file_name = oasysgui.lineEdit(figure_box, self, "beam_file_name", "Shadow File Name",
labelWidth=120, valueType=str, orientation="horizontal")
self.le_beam_file_name.setFixedWidth(330)
gui.button(figure_box, self, "...", callback=self.selectFile)
gui.separator(left_box_1, height=10)
button = gui.button(self.controlArea, self, "Write Shadow File", callback=self.write_file)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def __init__(self):
self.setFixedWidth(590)
self.setFixedHeight(390)
left_box_1 = oasysgui.widgetBox(self.controlArea, "Ansys Surface", addSpace=True, orientation="vertical")
select_file_box = oasysgui.widgetBox(left_box_1, "", addSpace=True, orientation="horizontal", height=50)
self.le_surface_file_name = oasysgui.lineEdit(select_file_box, self, "surface_file_name", "Surface File Name", labelWidth=150, valueType=str, orientation="horizontal")
self.le_surface_file_name.setFixedWidth(300)
pushButton = gui.button(select_file_box, self, "...")
pushButton.clicked.connect(self.selectSurfaceFile)
oasysgui.lineEdit(left_box_1, self, "x_min", "X Min", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "x_max", "X Max", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "y_min", "Y Min", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "y_max", "Y Max", labelWidth=350, valueType=float, orientation="horizontal")
gui.separator(left_box_1)
oasysgui.lineEdit(left_box_1, self, "number_of_x_cells", "Number of X cells", labelWidth=350, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "number_of_y_cells", "Number of Y cells", labelWidth=350, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "n_sigma_x", "N Sigma X", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "n_sigma_y", "N Sigma Y", labelWidth=350, valueType=float, orientation="horizontal")
gui.separator(self.controlArea)
button = gui.button(self.controlArea, self, "Convert To Shadow", callback=self.convertToShadow)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def build_gui(self):
main_box = oasysgui.widgetBox(self.controlArea, "Wofry Wavefront Parameters", orientation="vertical", width=self.CONTROL_AREA_WIDTH-5, height=300)
oasysgui.lineEdit(main_box, self, "source_lambda", "Wavelength [nm]", labelWidth=260, valueType=float, orientation="horizontal")
gui.separator(main_box, height=5)
gui.comboBox(main_box, self, "source_position", label="Source Position",
items=["User Defined", "Put Source at Mirror Focus"], labelWidth=260,
callback=self.set_SourcePosition, sendSelectedValue=False, orientation="horizontal")
self.source_position_box_1 = oasysgui.widgetBox(main_box, "", addSpace=False, orientation="vertical", height=70)
self.source_position_box_2 = oasysgui.widgetBox(main_box, "", addSpace=False, orientation="vertical", height=70)
self.le_z_origin = oasysgui.lineEdit(self.source_position_box_1, self, "z_origin", "Z Origin", labelWidth=260, valueType=float, orientation="horizontal")
self.le_x_origin = oasysgui.lineEdit(self.source_position_box_1, self, "x_origin", "X Origin", labelWidth=260, valueType=float, orientation="horizontal")
oasysgui.lineEdit(self.source_position_box_1, self, "theta", "Theta [deg]", labelWidth=260, valueType=float, orientation="horizontal")
self.le_longitudinal_correction = oasysgui.lineEdit(self.source_position_box_2, self, "longitudinal_correction", "Longitudinal correction", labelWidth=260, valueType=float, orientation="horizontal")
self.le_transverse_correction = oasysgui.lineEdit(self.source_position_box_2, self, "transverse_correction", "Transverse correction", labelWidth=260, valueType=float, orientation="horizontal")
oasysgui.lineEdit(self.source_position_box_2, self, "delta_theta", "\u0394" + "Theta [deg]", labelWidth=260, valueType=float, orientation="horizontal")
self.set_SourcePosition()
gui.separator(main_box, height=5)
gui.comboBox(main_box, self, "reset_phase", label="Reset Phase",
items=["No", "Yes"], labelWidth=300, sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(main_box, self, "normalization_factor", "Normalization Factor", labelWidth=260, valueType=float, orientation="horizontal")
def __init__(self):
super().__init__()
tab_spe = oasysgui.createTabPage(self.tabs_setting, "Spectroscopy Settings")
spectro_box = oasysgui.widgetBox(tab_spe, "Spectroscopy settings", addSpace=True, orientation="vertical", height=100)
gui.comboBox(spectro_box, self, "spectro_variable", label="Spectroscopy Variable", labelWidth=300,
items=["Energy",
"Wavelength"],
sendSelectedValue=False, orientation="horizontal")
gui.comboBox(spectro_box, self, "spectro_number_of_bins", label="Number of Bins", labelWidth=350,
items=["1",
"2",
"3",
"4",
"5",
"6",
"7",
"8",
"9",
"10"],
sendSelectedValue=False, orientation="horizontal")
spectro_plot_tab = oasysgui.widgetBox(self.main_tabs, addToLayout=0, margin=4)
self.main_tabs.insertTab(1, spectro_plot_tab, "Spectroscopy Plots")
self.spectro_image_box = gui.widgetBox(spectro_plot_tab, "Spectroscopy Plot Result", addSpace=True, orientation="vertical")
self.spectro_image_box.setFixedHeight(self.IMAGE_HEIGHT)
self.spectro_image_box.setFixedWidth(self.IMAGE_WIDTH)
self.color_map = plt.cm.get_cmap('Blues')
def __init__(self):
super().__init__()
button_box = oasysgui.widgetBox(self.controlArea, "", addSpace=False, orientation="horizontal")
button = gui.button(button_box, self, "Run Retrace", callback=self.retrace)
font = QFont(button.font())
font.setBold(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button = gui.button(button_box, self, "Reset Fields", callback=self.callResetSettings)
font = QFont(button.font())
font.setItalic(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Red'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button.setFixedWidth(150)
gui.separator(self.controlArea)
box = oasysgui.widgetBox(self.controlArea, "", orientation="vertical", width=self.CONTROL_AREA_WIDTH-5, height=550)
main_box = oasysgui.widgetBox(box, "Shadow Beam Retrace", orientation="vertical", width=self.CONTROL_AREA_WIDTH-5, height=70)
self.le_retrace_distance = oasysgui.lineEdit(main_box, self, "retrace_distance", "Retrace to ", labelWidth=280, valueType=float, orientation="horizontal")
def setAdvancedTab(self):
#################
propagation_box = oasysgui.widgetBox(self.tab_adv, "Propagation Parameters", addSpace=True, orientation="vertical", height=240)
gui.comboBox(propagation_box, self, "dist_to_img_calc", label="Distance to image", labelWidth=150,
items=["Use O.E. Image Plane Distance", "Specify Value"],
callback=self.set_DistanceToImageCalc, sendSelectedValue=False, orientation="horizontal")
self.dist = oasysgui.lineEdit(propagation_box, self, "distance", "Distance to Image value", labelWidth=260, valueType=float, orientation="horizontal")
self.nf = gui.comboBox(propagation_box, self, "nfc", label="Near Field Calculation", labelWidth=310,
items=["No", "Yes"], callback=self.set_NF,
sendSelectedValue=False, orientation="horizontal")
self.focal_length_calc = gui.comboBox(propagation_box, self, "focallength_calc", label="Focal Length", labelWidth=180,
items=["Use O.E. Focal Distance", "Specify Value"],
callback=self.set_FocalLengthCalc, sendSelectedValue=False,
orientation="horizontal")
self.focal_length = oasysgui.lineEdit(propagation_box, self, "focallength_value", "Focal Length value", labelWidth=200, valueType=float, orientation="horizontal")
congruence_box = oasysgui.widgetBox(self.tab_adv, "Calculation Congruence Parameters", addSpace=True, orientation="vertical", height=200)
gui.comboBox(congruence_box, self, "automatic", label="Analize geometry to avoid unuseful calculations", labelWidth=310,
items=["No", "Yes"],
sendSelectedValue=False, orientation="horizontal")
gui.comboBox(congruence_box, self, "send_original_beam", label="Send Original Beam in case of failure", labelWidth=310,
items=["No", "Yes"],
sendSelectedValue=False, orientation="horizontal")
def __init__(self, graphical_options=ow_optical_element.GraphicalOptions()):
graphical_options.is_ellipsoidal=True
super().__init__(graphical_options)
gui.comboBox(self.orientation_box, self, "add_acceptance_slits", label="Add Acceptance Slit", labelWidth=390,
items=["No", "Yes"], sendSelectedValue=False, orientation="horizontal", callback=self.set_AddAcceptanceSlits)
self.orientation_box_1 = oasysgui.widgetBox(self.orientation_box, "", addSpace=False, orientation="vertical", height=140)
self.cb_acceptance_slits_mode = gui.comboBox(self.orientation_box_1, self, "acceptance_slits_mode", label="Mode", labelWidth=260,
items=["Automatic", "Manual"], sendSelectedValue=False, orientation="horizontal", callback=self.set_AcceptanceSlitsMode)
self.le_auto_slit_width_xaxis = oasysgui.lineEdit(self.orientation_box_1, self, "auto_slit_width_xaxis", "Slit width/x-axis", labelWidth=260, valueType=float, orientation="horizontal")
self.le_auto_slit_height_zaxis = oasysgui.lineEdit(self.orientation_box_1, self, "auto_slit_height_zaxis", "Slit height/z-axis", labelWidth=260, valueType=float, orientation="horizontal")
self.le_auto_slit_center_xaxis = oasysgui.lineEdit(self.orientation_box_1, self, "auto_slit_center_xaxis", "Slit center/x-axis", labelWidth=260, valueType=float, orientation="horizontal")
self.le_auto_slit_center_zaxis = oasysgui.lineEdit(self.orientation_box_1, self, "auto_slit_center_zaxis", "Slit center/z-axis", labelWidth=260, valueType=float, orientation="horizontal")
self.orientation_box_2 = oasysgui.widgetBox(self.orientation_box, "", addSpace=False, orientation="vertical", height=140)
self.set_AddAcceptanceSlits()
self.le_dim_x_plus.textChanged.connect(self.compute_auto_slits)
self.le_dim_x_minus.textChanged.connect(self.compute_auto_slits)
self.le_dim_y_plus.textChanged.connect(self.compute_auto_slits)
self.le_dim_y_minus.textChanged.connect(self.compute_auto_slits)
self.set_Dim_Parameters()
def __init__(self, show_automatic_box=True):
super().__init__(show_automatic_box)
self.main_tabs = gui.tabWidget(self.mainArea)
plot_tab = gui.createTabPage(self.main_tabs, "Plots")
out_tab = gui.createTabPage(self.main_tabs, "Output")
view_box = oasysgui.widgetBox(plot_tab, "Plotting Style", addSpace=False, orientation="horizontal")
view_box_1 = oasysgui.widgetBox(view_box, "", addSpace=False, orientation="vertical", width=350)
self.view_type_combo = gui.comboBox(view_box_1, self, "view_type", label="Select level of Plotting",
labelWidth=220,
items=["Detailed Plot", "Preview", "None"],
callback=self.set_PlotQuality, sendSelectedValue=False, orientation="horizontal")
self.tab = []
self.tabs = gui.tabWidget(plot_tab)
self.initializeTabs()
self.enableFootprint(False)
self.shadow_output = QtGui.QTextEdit()
self.shadow_output.setReadOnly(True)
out_box = gui.widgetBox(out_tab, "System Output", addSpace=True, orientation="horizontal")
out_box.layout().addWidget(self.shadow_output)
self.shadow_output.setFixedHeight(600)
self.shadow_output.setFixedWidth(600)
def __init__(self):
super().__init__()
self.runaction = OWAction("Compute", self)
self.runaction.triggered.connect(self.compute)
self.addAction(self.runaction)
geom = QApplication.desktop().availableGeometry()
self.setGeometry(QRect(round(geom.width()*0.05),
round(geom.height()*0.05),
round(min(geom.width()*0.98, self.MAX_WIDTH)),
round(min(geom.height()*0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
box0 = gui.widgetBox(self.controlArea, "", orientation="horizontal")
#widget buttons: compute, set defaults, help
gui.button(box0, self, "Compute", callback=self.compute)
gui.button(box0, self, "Defaults", callback=self.defaults)
gui.button(box0, self, "Help", callback=self.help1)
gui.separator(self.controlArea, height=10)
self.build_gui()
self.process_showers()
gui.rubber(self.controlArea)
self.main_tabs = gui.tabWidget(self.mainArea)
plot_tab = gui.createTabPage(self.main_tabs, "Results")
out_tab = gui.createTabPage(self.main_tabs, "Output")
view_box = oasysgui.widgetBox(plot_tab, "Results Options", addSpace=False, orientation="horizontal")
view_box_1 = oasysgui.widgetBox(view_box, "", addSpace=False, orientation="vertical", width=350)
self.view_type_combo = gui.comboBox(view_box_1, self, "view_type", label="View Results",
labelWidth=220,
items=["No", "Yes"],
callback=self.set_ViewType, sendSelectedValue=False, orientation="horizontal")
self.tab = []
self.tabs = gui.tabWidget(plot_tab)
self.initializeTabs()
self.xoppy_output = QtGui.QTextEdit()
self.xoppy_output.setReadOnly(True)
out_box = gui.widgetBox(out_tab, "System Output", addSpace=True, orientation="horizontal")
out_box.layout().addWidget(self.xoppy_output)
self.xoppy_output.setFixedHeight(600)
self.xoppy_output.setFixedWidth(600)
gui.rubber(self.mainArea)
def __init__(self):
super().__init__()
geom = QApplication.desktop().availableGeometry()
self.setGeometry(
QRect(round(geom.width() * 0.05), round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
gui.separator(self.controlArea)
button_box = oasysgui.widgetBox(self.controlArea,
"",
addSpace=False,
orientation="horizontal")
button = gui.button(button_box,
self,
"Read Surface",
callback=self.read_surface)
button.setFixedHeight(45)
button = gui.button(button_box,
self,
"Render Surface",
callback=self.render_surface)
button.setFixedHeight(45)
input_box_l = oasysgui.widgetBox(self.controlArea,
"Input",
addSpace=True,
orientation="horizontal",
height=self.TABS_AREA_HEIGHT)
self.le_surface_file_name = oasysgui.lineEdit(input_box_l,
self,
"surface_file_name",
"Surface File Name",
labelWidth=120,
valueType=str,
orientation="horizontal")
gui.button(input_box_l, self, "...", callback=self.selectSurfaceFile)
self.figure = Figure(figsize=(600, 600))
self.figure.patch.set_facecolor('white')
self.axis = self.figure.add_subplot(111, projection='3d')
self.axis.set_zlabel("Z [m]")
self.figure_canvas = FigureCanvasQTAgg(self.figure)
self.mainArea.layout().addWidget(self.figure_canvas)
gui.rubber(self.mainArea)
def __init__(self):
super().__init__()
self.runaction = OWAction("Compute", self)
self.runaction.triggered.connect(self.compute)
self.addAction(self.runaction)
geom = QApplication.desktop().availableGeometry()
self.setGeometry(QRect(round(geom.width()*0.05),
round(geom.height()*0.05),
round(min(geom.width()*0.98, self.MAX_WIDTH)),
round(min(geom.height()*0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
box0 = gui.widgetBox(self.controlArea, "", orientation="horizontal")
#widget buttons: compute, set defaults, help
gui.button(box0, self, "Compute", callback=self.compute)
gui.button(box0, self, "Defaults", callback=self.defaults)
gui.button(box0, self, "Help", callback=self.help1)
gui.separator(self.controlArea, height=10)
self.build_gui()
self.process_showers()
gui.rubber(self.controlArea)
self.main_tabs = gui.tabWidget(self.mainArea)
plot_tab = gui.createTabPage(self.main_tabs, "Results")
out_tab = gui.createTabPage(self.main_tabs, "Output")
view_box = oasysgui.widgetBox(plot_tab, "Results Options", addSpace=False, orientation="horizontal")
view_box_1 = oasysgui.widgetBox(view_box, "", addSpace=False, orientation="vertical", width=350)
self.view_type_combo = gui.comboBox(view_box_1, self, "view_type", label="View Results",
labelWidth=220,
items=["No", "Yes"],
callback=self.set_ViewType, sendSelectedValue=False, orientation="horizontal")
self.tab = []
self.tabs = gui.tabWidget(plot_tab)
self.initializeTabs()
self.xoppy_output = QtGui.QTextEdit()
self.xoppy_output.setReadOnly(True)
out_box = gui.widgetBox(out_tab, "System Output", addSpace=True, orientation="horizontal")
out_box.layout().addWidget(self.xoppy_output)
self.xoppy_output.setFixedHeight(600)
self.xoppy_output.setFixedWidth(600)
gui.rubber(self.mainArea)
def __init__(self):
super().__init__()
self.runaction = widget.OWAction("Read Wavefront hdf5 File", self)
self.runaction.triggered.connect(self.read_file)
self.addAction(self.runaction)
self.setFixedWidth(590)
self.setFixedHeight(250)
left_box_1 = oasysgui.widgetBox(self.controlArea,
"HDF5 Local File Selection",
addSpace=True,
orientation="vertical",
width=570,
height=100)
figure_box = oasysgui.widgetBox(left_box_1,
"",
addSpace=True,
orientation="vertical",
width=550,
height=50)
self.le_file_name = oasysgui.lineEdit(figure_box,
self,
"file_name",
"File Name",
labelWidth=190,
valueType=str,
orientation="horizontal")
self.le_file_name.setFixedWidth(360)
self.le_data_path = oasysgui.lineEdit(figure_box,
self,
"data_path",
"Group (wavefront name)",
labelWidth=190,
valueType=str,
orientation="horizontal")
self.le_data_path.setFixedWidth(360)
gui.separator(left_box_1, height=20)
button = gui.button(self.controlArea,
self,
"Browse File and Send Data",
callback=self.read_file)
button.setFixedHeight(45)
gui.separator(self.controlArea, height=20)
button = gui.button(self.controlArea,
self,
"Send Data",
callback=self.send_data)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def clear_data(self):
self.input_srw_data = None
self.last_ticket = None
self.current_stats = None
self.current_histo_data = None
self.current_histo_data_phase = None
self.last_histo_data = None
self.last_histo_data_phase = None
self.histo_index = -1
if not self.plot_canvas_intensity is None:
self.main_tabs.removeTab(1)
self.main_tabs.removeTab(0)
plot_tab = oasysgui.widgetBox(self.main_tabs,
addToLayout=0,
margin=4)
plot_tabs = oasysgui.tabWidget(plot_tab)
intensity_tab = oasysgui.createTabPage(plot_tabs, "Intensity")
phase_tab = oasysgui.createTabPage(plot_tabs, "Phase")
self.image_box = gui.widgetBox(intensity_tab,
"",
addSpace=False,
orientation="vertical")
self.image_box.setFixedHeight(self.IMAGE_HEIGHT - 30)
self.image_box.setFixedWidth(self.IMAGE_WIDTH - 20)
self.image_box_2 = gui.widgetBox(phase_tab,
"",
addSpace=False,
orientation="vertical")
self.image_box_2.setFixedHeight(self.IMAGE_HEIGHT - 30)
self.image_box_2.setFixedWidth(self.IMAGE_WIDTH - 20)
plot_tab_stats = oasysgui.widgetBox(self.main_tabs,
addToLayout=0,
margin=4)
self.image_box_stats = gui.widgetBox(plot_tab_stats,
"Stats Result",
addSpace=True,
orientation="vertical")
self.image_box_stats.setFixedHeight(self.IMAGE_HEIGHT)
self.image_box_stats.setFixedWidth(self.IMAGE_WIDTH)
self.main_tabs.insertTab(0, plot_tab_stats, "TEMP")
self.main_tabs.setTabText(0, "Stats")
self.main_tabs.insertTab(0, plot_tab, "TEMP")
self.main_tabs.setTabText(0, "Plots")
self.main_tabs.setCurrentIndex(0)
self.plot_canvas_intensity = None
self.plot_canvas_phase = None
self.plot_canvas_stats = None
def __init__(self, x_scale_factor = 1.0, y_scale_factor = 1.0, is_2d=True):
super(SRWPlot.InfoBoxWidget, self).__init__()
info_box_inner= gui.widgetBox(self, "Info")
info_box_inner.setFixedHeight(515*y_scale_factor)
info_box_inner.setFixedWidth(230*x_scale_factor)
self.total = gui.lineEdit(info_box_inner, self, "total_field", "Total", tooltip="Total", labelWidth=115, valueType=str, orientation="horizontal")
label_box_1 = gui.widgetBox(info_box_inner, "", addSpace=False, orientation="horizontal")
self.label_h = QLabel("FWHM ")
self.label_h.setFixedWidth(115)
palette = QPalette(self.label_h.palette())
palette.setColor(QPalette.Foreground, QColor('blue'))
self.label_h.setPalette(palette)
label_box_1.layout().addWidget(self.label_h)
self.fwhm_h = gui.lineEdit(label_box_1, self, "fwhm_h_field", "", tooltip="FWHM", labelWidth=115, valueType=str, orientation="horizontal")
if is_2d:
label_box_2 = gui.widgetBox(info_box_inner, "", addSpace=False, orientation="horizontal")
self.label_v = QLabel("FWHM ")
self.label_v.setFixedWidth(115)
palette = QPalette(self.label_h.palette())
palette.setColor(QPalette.Foreground, QColor('red'))
self.label_v.setPalette(palette)
label_box_2.layout().addWidget(self.label_v)
self.fwhm_v = gui.lineEdit(label_box_2, self, "fwhm_v_field", "", tooltip="FWHM", labelWidth=115, valueType=str, orientation="horizontal")
self.total.setReadOnly(True)
font = QFont(self.total.font())
font.setBold(True)
self.total.setFont(font)
palette = QPalette(self.total.palette())
palette.setColor(QPalette.Text, QColor('dark blue'))
palette.setColor(QPalette.Base, QColor(243, 240, 160))
self.total.setPalette(palette)
self.fwhm_h.setReadOnly(True)
font = QFont(self.total.font())
font.setBold(True)
self.fwhm_h.setFont(font)
palette = QPalette(self.fwhm_h.palette())
palette.setColor(QPalette.Text, QColor('dark blue'))
palette.setColor(QPalette.Base, QColor(243, 240, 160))
self.fwhm_h.setPalette(palette)
if is_2d:
self.fwhm_v.setReadOnly(True)
font = QFont(self.fwhm_v.font())
font.setBold(True)
self.fwhm_v.setFont(font)
palette = QPalette(self.fwhm_v.palette())
palette.setColor(QPalette.Text, QColor('dark blue'))
palette.setColor(QPalette.Base, QColor(243, 240, 160))
self.fwhm_v.setPalette(palette)
def add_specific_wiggler_plots(self):
wiggler_plot_tab = oasysgui.widgetBox(self.main_tabs,
addToLayout=0,
margin=4)
self.main_tabs.insertTab(1, wiggler_plot_tab, "Wiggler Plots")
view_box = oasysgui.widgetBox(wiggler_plot_tab,
"Plotting Style",
addSpace=False,
orientation="horizontal")
view_box_1 = oasysgui.widgetBox(view_box,
"",
addSpace=False,
orientation="vertical",
width=350)
self.wiggler_view_type_combo = orangegui.comboBox(
view_box_1,
self,
"plot_wiggler_graph",
label="Plot Graphs?",
labelWidth=220,
items=["No", "Yes"],
callback=self.plot_widget_all,
sendSelectedValue=False,
orientation="horizontal")
self.wiggler_tab = []
self.wiggler_tabs = oasysgui.tabWidget(wiggler_plot_tab)
current_tab = self.wiggler_tabs.currentIndex()
size = len(self.wiggler_tab)
indexes = range(0, size)
for index in indexes:
self.wiggler_tabs.removeTab(size - 1 - index)
self.wiggler_tab = [
orangegui.createTabPage(self.wiggler_tabs, "Magnetic Field"),
orangegui.createTabPage(self.wiggler_tabs, "Electron Curvature"),
orangegui.createTabPage(self.wiggler_tabs, "Electron Velocity"),
orangegui.createTabPage(self.wiggler_tabs, "Electron Trajectory"),
orangegui.createTabPage(self.wiggler_tabs, "Wiggler Spectrum"),
orangegui.createTabPage(self.wiggler_tabs,
"Wiggler Spectral power")
]
for tab in self.wiggler_tab:
tab.setFixedHeight(self.IMAGE_HEIGHT)
tab.setFixedWidth(self.IMAGE_WIDTH)
self.wiggler_plot_canvas = [None, None, None, None, None, None]
self.wiggler_tabs.setCurrentIndex(current_tab)
def build_wf_photon_energy_box(self, box):
gui.comboBox(box,
self,
"wf_use_harmonic",
label="Energy Setting",
items=["Harmonic", "Other"],
labelWidth=260,
callback=self.set_WFUseHarmonic,
sendSelectedValue=False,
orientation="horizontal")
self.use_harmonic_box_1 = oasysgui.widgetBox(box,
"",
addSpace=False,
orientation="vertical",
height=50)
oasysgui.lineEdit(self.use_harmonic_box_1,
self,
"wf_harmonic_number",
"Harmonic #",
labelWidth=260,
valueType=int,
orientation="horizontal",
callback=self.set_harmonic_energy)
le_he = oasysgui.lineEdit(self.use_harmonic_box_1,
self,
"wf_harmonic_energy",
"Harmonic Energy",
labelWidth=260,
valueType=float,
orientation="horizontal")
le_he.setReadOnly(True)
font = QFont(le_he.font())
font.setBold(True)
le_he.setFont(font)
palette = QPalette(le_he.palette())
palette.setColor(QPalette.Text, QColor('dark blue'))
palette.setColor(QPalette.Base, QColor(243, 240, 160))
le_he.setPalette(palette)
self.use_harmonic_box_2 = oasysgui.widgetBox(box,
"",
addSpace=False,
orientation="vertical",
height=50)
oasysgui.lineEdit(self.use_harmonic_box_2,
self,
"wf_photon_energy",
"Photon Energy [eV]",
labelWidth=260,
valueType=float,
orientation="horizontal")
self.set_WFUseHarmonic()
def __init__(self):
super().__init__()
geom = QApplication.desktop().availableGeometry()
self.setGeometry(QRect(round(geom.width() * 0.05),
round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
gui.separator(self.controlArea)
button_box = oasysgui.widgetBox(self.controlArea, "", addSpace=False, orientation="horizontal")
button = gui.button(button_box, self, "Read Thickness", callback=self.read_surface)
button.setFixedHeight(45)
button = gui.button(button_box, self, "Render Thickness", callback=self.render_surface)
button.setFixedHeight(45)
input_box_l = oasysgui.widgetBox(self.controlArea, "Input", addSpace=True, orientation="vertical", height=460, width=self.CONTROL_AREA_WIDTH)
gui.button(input_box_l, self, "Select Thickness Error Profile Data Files", callback=self.select_files)
self.files_area = oasysgui.textArea(height=250)
self.refresh_files_text_area()
input_box_l.layout().addWidget(self.files_area)
gui.comboBox(input_box_l, self, "separator", label="Separator", labelWidth=350,
items=["Comma", "Space"], sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(input_box_l, self, "skip_rows", label="Skip Rows", labelWidth=350, orientation="horizontal", valueType=int)
oasysgui.lineEdit(input_box_l, self, "conversion_to_m_z", label="Thickness conversion to m", labelWidth=300, orientation="horizontal", valueType=float)
oasysgui.lineEdit(input_box_l, self, "conversion_to_m_xy", label="Coordinates conversion to m", labelWidth=300, orientation="horizontal", valueType=float)
gui.comboBox(input_box_l, self, "negate", label="Invert Surface", labelWidth=350,
items=["No", "Yes"], sendSelectedValue=False, orientation="horizontal")
main_tabs = oasysgui.tabWidget(self.mainArea)
plot_tab = oasysgui.createTabPage(main_tabs, "Thickness Error Surfaces")
self.tab = []
self.tabs = oasysgui.tabWidget(plot_tab)
self.initialize_figures()
gui.rubber(self.controlArea)
gui.rubber(self.mainArea)
def __init__(self):
super().__init__()
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
tabs_setting = gui.tabWidget(self.controlArea)
tab_bas = oasysgui.createTabPage(tabs_setting, "Basic Setting")
tab_adv = oasysgui.createTabPage(tabs_setting, "Advanced Setting")
lens_box = oasysgui.widgetBox(tab_bas, "Input Parameters", addSpace=False, orientation="vertical", height=600, width=450)
oasysgui.lineEdit(lens_box, self, "source_plane_distance", "Source Plane Distance [cm]", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(lens_box, self, "image_plane_distance", "Image Plane Distance [cm]", labelWidth=350, valueType=float, orientation="horizontal")
gui.separator(lens_box)
oasysgui.lineEdit(lens_box, self, "input_diameter", "Input Diameter [cm]", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(lens_box, self, "angular_acceptance", "Angular Acceptance [deg]", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(lens_box, self, "inner_diameter", "Central Diameter [cm]", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(lens_box, self, "output_diameter", "Output Diameter [cm]", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(lens_box, self, "focal_length", "Focal Length [cm]", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(lens_box, self, "focus_dimension", "Approximate focus dimension [um]", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(lens_box, self, "lens_length", "Lens Total Length [cm]", labelWidth=350, valueType=float, orientation="horizontal")
gui.separator(lens_box)
oasysgui.lineEdit(lens_box, self, "transmittance", "Lens Transmittance [%]", labelWidth=350, valueType=float, orientation="horizontal")
gui.separator(self.controlArea, height=80)
button_box = oasysgui.widgetBox(self.controlArea, "", addSpace=False, orientation="horizontal")
button = gui.button(button_box, self, "Run Shadow/trace", callback=self.traceOpticalElement)
font = QFont(button.font())
font.setBold(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button = gui.button(button_box, self, "Reset Fields", callback=self.callResetSettings)
font = QFont(button.font())
font.setItalic(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Red'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button.setFixedWidth(100)
def __init__(self):
super().__init__()
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
tabs_setting = gui.tabWidget(self.controlArea)
tab_bas = oasysgui.createTabPage(tabs_setting, "Basic Setting")
tab_adv = oasysgui.createTabPage(tabs_setting, "Advanced Setting")
lens_box = oasysgui.widgetBox(tab_bas, "Input Parameters", addSpace=False, orientation="vertical", height=600, width=450)
self.le_source_plane_distance = oasysgui.lineEdit(lens_box, self, "source_plane_distance", "Source Plane Distance", labelWidth=350, valueType=float, orientation="horizontal")
self.le_image_plane_distance = oasysgui.lineEdit(lens_box, self, "image_plane_distance", "Image Plane Distance", labelWidth=350, valueType=float, orientation="horizontal")
gui.separator(lens_box)
self.le_input_diameter = oasysgui.lineEdit(lens_box, self, "input_diameter", "Input Diameter", labelWidth=350, valueType=float, orientation="horizontal")
oasysgui.lineEdit(lens_box, self, "angular_acceptance", "Angular Acceptance [deg]", labelWidth=350, valueType=float, orientation="horizontal")
self.le_inner_diameter = oasysgui.lineEdit(lens_box, self, "inner_diameter", "Central Diameter", labelWidth=350, valueType=float, orientation="horizontal")
self.le_output_diameter = oasysgui.lineEdit(lens_box, self, "output_diameter", "Output Diameter", labelWidth=350, valueType=float, orientation="horizontal")
self.le_focal_length = oasysgui.lineEdit(lens_box, self, "focal_length", "Focal Length", labelWidth=350, valueType=float, orientation="horizontal")
self.le_focus_dimension = oasysgui.lineEdit(lens_box, self, "focus_dimension", "Approximate focus dimension", labelWidth=350, valueType=float, orientation="horizontal")
self.le_lens_length = oasysgui.lineEdit(lens_box, self, "lens_length", "Lens Total Length", labelWidth=350, valueType=float, orientation="horizontal")
gui.separator(lens_box)
oasysgui.lineEdit(lens_box, self, "transmittance", "Lens Transmittance [%]", labelWidth=350, valueType=float, orientation="horizontal")
gui.separator(self.controlArea, height=80)
button_box = oasysgui.widgetBox(self.controlArea, "", addSpace=False, orientation="horizontal")
button = gui.button(button_box, self, "Run Shadow/trace", callback=self.traceOpticalElement)
font = QFont(button.font())
font.setBold(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button = gui.button(button_box, self, "Reset Fields", callback=self.callResetSettings)
font = QFont(button.font())
font.setItalic(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Red'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button.setFixedWidth(100)
def __init__(self, show_automatic_box=True):
super().__init__(show_automatic_box=show_automatic_box)
self.runaction = widget.OWAction("Run Shadow/Trace", self)
self.runaction.triggered.connect(self.traceOpticalElement)
self.addAction(self.runaction)
#################################
# FIX A WEIRD BEHAVIOUR AFTER DISPLAY
# THE WIDGET: PROBABLY ON SIGNAL MANAGER
self.dumpSettings()
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
button_box = oasysgui.widgetBox(self.controlArea, "", addSpace=False, orientation="horizontal")
self.button_trace = gui.button(button_box, self, "Run Shadow/Trace", callback=self.traceOpticalElement)
font = QFont(self.button_trace.font())
font.setBold(True)
self.button_trace.setFont(font)
palette = QPalette(self.button_trace.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
self.button_trace.setPalette(palette) # assign new palette
self.button_trace.setFixedHeight(45)
self.button_reset = gui.button(button_box, self, "Reset Fields", callback=self.callResetSettings)
font = QFont(self.button_reset.font())
font.setItalic(True)
self.button_reset.setFont(font)
palette = QPalette(self.button_reset.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Red'))
self.button_reset.setPalette(palette) # assign new palette
self.button_reset.setFixedHeight(45)
self.button_reset.setFixedWidth(150)
gui.separator(self.controlArea)
self.tabs_setting = oasysgui.tabWidget(self.controlArea)
self.tabs_setting.setFixedHeight(self.TABS_AREA_HEIGHT-5)
self.tabs_setting.setFixedWidth(self.CONTROL_AREA_WIDTH-5)
self.tab_bas = oasysgui.createTabPage(self.tabs_setting, "Basic Setting")
self.tab_adv = oasysgui.createTabPage(self.tabs_setting, "Advanced Setting")
adv_other_box = oasysgui.widgetBox(self.tab_adv, "Optional file output", addSpace=False, orientation="vertical")
gui.comboBox(adv_other_box, self, "file_to_write_out", label="Files to write out", labelWidth=150,
items=["All", "Mirror", "Image", "None", "Debug (All + start.xx/end.xx)"],
sendSelectedValue=False, orientation="horizontal")
def __init__(self, show_automatic_box=True):
super().__init__(show_automatic_box)
self.setFixedWidth(420)
self.setFixedHeight(350)
gen_box = gui.widgetBox(self.controlArea, "Energy Cirp", addSpace=True, orientation="vertical")
button_box = oasysgui.widgetBox(gen_box, "", addSpace=False, orientation="horizontal")
button = gui.button(button_box, self, "Generate Energy Spectrum", callback=self.generate_energy_spectrum)
font = QFont(button.font())
font.setBold(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
gui.separator(gen_box, height=10)
result_box = oasysgui.widgetBox(gen_box, "Energy Cirp Setting", addSpace=True, orientation="vertical")
gui.comboBox(result_box, self, "units", label="Units", labelWidth=260,
items=["Energy",
"Wavelength"],
sendSelectedValue=False, orientation="horizontal")
gui.comboBox(result_box, self, "kind_of_calculation", label="Kind of calculation", labelWidth=110,
items=["Energy/Wavelength = C + k*Y", "User File (Energy/Wavelength vs. Y)"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_KindOfCalculation)
self.kind_box_1 = oasysgui.widgetBox(result_box, "", addSpace=True, orientation="vertical", height=50)
oasysgui.lineEdit(self.kind_box_1, self, "factor", "Proportionality factor (k) [to eV/Å]",
labelWidth=240, valueType=float, orientation="horizontal")
oasysgui.lineEdit(self.kind_box_1, self, "central_value", "Central Energy/Wavelength Value [eV/Å]",
labelWidth=240, valueType=float, orientation="horizontal")
self.kind_box_2 = oasysgui.widgetBox(result_box, "", addSpace=True, orientation="horizontal", height=50)
self.le_user_file = oasysgui.lineEdit(self.kind_box_2, self, "user_file", "File Name",
labelWidth=60, valueType=str, orientation="horizontal")
gui.button(self.kind_box_2, self, "...", callback=self.selectUserFile)
self.set_KindOfCalculation()
def __init__(self, show_automatic_box=True):
super().__init__(show_automatic_box=show_automatic_box)
self.runaction = widget.OWAction("Run Shadow/Trace", self)
self.runaction.triggered.connect(self.traceOpticalElement)
self.addAction(self.runaction)
#################################
# FIX A WEIRD BEHAVIOUR AFTER DISPLAY
# THE WIDGET: PROBABLY ON SIGNAL MANAGER
self.dumpSettings()
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
button_box = oasysgui.widgetBox(self.controlArea, "", addSpace=False, orientation="horizontal")
self.button_trace = gui.button(button_box, self, "Run Shadow/Trace", callback=self.traceOpticalElement)
font = QFont(self.button_trace.font())
font.setBold(True)
self.button_trace.setFont(font)
palette = QPalette(self.button_trace.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
self.button_trace.setPalette(palette) # assign new palette
self.button_trace.setFixedHeight(45)
self.button_reset = gui.button(button_box, self, "Reset Fields", callback=self.callResetSettings)
font = QFont(self.button_reset.font())
font.setItalic(True)
self.button_reset.setFont(font)
palette = QPalette(self.button_reset.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Red'))
self.button_reset.setPalette(palette) # assign new palette
self.button_reset.setFixedHeight(45)
self.button_reset.setFixedWidth(150)
gui.separator(self.controlArea)
self.tabs_setting = gui.tabWidget(self.controlArea)
self.tabs_setting.setFixedHeight(self.TABS_AREA_HEIGHT)
self.tabs_setting.setFixedWidth(self.CONTROL_AREA_WIDTH-5)
self.tab_bas = oasysgui.createTabPage(self.tabs_setting, "Basic Setting")
self.tab_adv = oasysgui.createTabPage(self.tabs_setting, "Advanced Setting")
adv_other_box = oasysgui.widgetBox(self.tab_adv, "Optional file output", addSpace=False, orientation="vertical")
gui.comboBox(adv_other_box, self, "file_to_write_out", label="Files to write out", labelWidth=150,
items=["All", "Mirror", "Image", "None", "Debug (All + start.xx/end.xx)"],
sendSelectedValue=False, orientation="horizontal")
def __init__(self):
super().__init__()
self.le_p = oasysgui.lineEdit(self.tab_bas, self, "p", "Distance Source - KB center (P)", labelWidth=280, valueType=float, orientation="horizontal")
self.le_q = oasysgui.lineEdit(self.tab_bas, self, "q", "Distance KB center - Image plane (Q)", labelWidth=280, valueType=float, orientation="horizontal")
self.le_separation = oasysgui.lineEdit(self.tab_bas, self, "separation", "Separation between the Mirrors\n(from center of V.F.M. to center of H.F.M.) ", labelWidth=280, valueType=float,
orientation="horizontal")
oasysgui.lineEdit(self.tab_bas, self, "mirror_orientation_angle", "Mirror orientation angle [deg]\n(with respect to the previous o.e. for the first mirror)", labelWidth=280,
valueType=float, orientation="horizontal")
gui.comboBox(self.tab_bas, self, "use_different_focal_positions", label="Different Focal Positions", labelWidth=280,
items=["No", "Yes"], sendSelectedValue=False, orientation="horizontal", callback=self.set_use_different_focal_positions)
self.focal_positions_box = oasysgui.widgetBox(self.tab_bas, "", addSpace=False, orientation="vertical")
self.focal_positions_empty = oasysgui.widgetBox(self.tab_bas, "", addSpace=False, orientation="vertical", height=40)
self.le_focal_positions_p = oasysgui.lineEdit(self.focal_positions_box, self, "focal_positions_p", "Focal Position P", labelWidth=280, valueType=float, orientation="horizontal")
self.le_focal_positions_q = oasysgui.lineEdit(self.focal_positions_box, self, "focal_positions_q", "Focal Position Q", labelWidth=280, valueType=float, orientation="horizontal")
self.set_use_different_focal_positions()
self.tab_mirrors = gui.tabWidget(self.tab_bas)
tab_vertical = oasysgui.createTabPage(self.tab_mirrors, "Vertical Focusing Mirror")
tab_horizontal = oasysgui.createTabPage(self.tab_mirrors, "Horizontal Focusing Mirror")
self.v_box = MirrorBox(kb=self,
parent=tab_vertical,
grazing_angles_mrad=self.grazing_angles_mrad[0],
shape=self.shape[0],
has_finite_dimensions=self.has_finite_dimensions[0],
dimensions=self.dimensions[0],
reflectivity_kind=self.reflectivity_kind[0],
reflectivity_files=self.reflectivity_files[0],
has_surface_error=self.has_surface_error[0],
surface_error_files= self.surface_error_files[0])
self.h_box = MirrorBox(kb=self,
parent=tab_horizontal,
grazing_angles_mrad=self.grazing_angles_mrad[1],
shape=self.shape[1],
has_finite_dimensions=self.has_finite_dimensions[1],
dimensions=self.dimensions[1],
reflectivity_kind=self.reflectivity_kind[1],
reflectivity_files=self.reflectivity_files[1],
has_surface_error=self.has_surface_error[1],
surface_error_files= self.surface_error_files[1])
def crl_insert_after(self):
current_index = self.tab_crls.currentIndex()
if ConfirmDialog.confirmed(
parent=self,
message="Confirm Insertion of a new element after " +
self.tab_crls.tabText(current_index) + "?"):
tab_crl = oasysgui.widgetBox(self.tab_crls,
addToLayout=0,
margin=4)
crl_box = CRLBox(transfocator=self, parent=tab_crl)
crl_box.after_change_workspace_units()
if current_index == self.tab_crls.count() - 1: # LAST
self.tab_crls.addTab(tab_crl, "TEMP")
self.crl_box_array.append(crl_box)
else:
self.tab_crls.insertTab(current_index + 1, tab_crl, "TEMP")
self.crl_box_array.insert(current_index + 1, crl_box)
self.dumpSettings()
for index in range(current_index, self.tab_crls.count()):
self.tab_crls.setTabText(index, "C.R.L " + str(index + 1))
self.tab_crls.setCurrentIndex(current_index + 1)
def __init__(self):
super().__init__()
geom = QApplication.desktop().availableGeometry()
self.setGeometry(
QRect(round(geom.width() * 0.05), round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMinimumHeight(self.geometry().height())
self.setMinimumWidth(self.geometry().width())
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.MAX_WIDTH - 10)
self.controlArea.setFixedHeight(self.MAX_HEIGHT - 10)
main_box = oasysgui.widgetBox(self.controlArea,
"From Shadow Beam To Wofry Wavefront",
orientation="vertical",
width=self.CONTROL_AREA_WIDTH - 5,
height=80)
gui.button(main_box,
self,
"Compute",
callback=self.convert_wavefront,
height=45)
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "X0h Request Form", addSpace=True, orientation="vertical",
width=610, height=640)
html = self.clear_input_form(HttpManager.send_xray_server_direct_request("/cgi/www_form.exe?template=x0h_form.htm"))
self.x0h_input = QWebView(left_box_1)
self.x0h_input.setHtml(html)
left_box_1.layout().addWidget(self.x0h_input)
self.x0h_input.setFixedHeight(540)
self.x0h_input.setFixedWidth(590)
button = gui.button(self.controlArea, self, "Get X0h!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.x0h_output = QWebView(self.tabs[0])
self.tabs[0].layout().addWidget(self.x0h_output)
self.x0h_output.setFixedHeight(630)
self.x0h_output.setFixedWidth(740)
def __init__(self):
super().__init__()
left_box_2 = oasysgui.widgetBox(self.tab_source,
"BM Parameters",
addSpace=True,
orientation="vertical",
height=175)
oasysgui.lineEdit(left_box_2,
self,
"magnetic_radius",
"Magnetic Radius [m]",
labelWidth=260,
valueType=float,
orientation="horizontal",
callback=self.calculateMagneticField)
oasysgui.lineEdit(left_box_2,
self,
"magnetic_field",
"Magnetic Field [T]",
labelWidth=260,
valueType=float,
orientation="horizontal",
callback=self.calculateMagneticRadius)
oasysgui.lineEdit(left_box_2,
self,
"length",
"Length [m]",
labelWidth=260,
valueType=float,
orientation="horizontal")
gui.rubber(self.controlArea)
gui.rubber(self.mainArea)
def draw_specific_box(self):
self.filter_box = oasysgui.widgetBox(self.tab_bas,
"Ideal Lens Setting",
addSpace=True,
orientation="vertical")
oasysgui.lineEdit(self.filter_box,
self,
"focal_x",
"Horizontal Focal Length [m]",
labelWidth=260,
valueType=float,
orientation="horizontal")
oasysgui.lineEdit(self.filter_box,
self,
"focal_y",
"Vertical Focal Length [m]",
labelWidth=260,
valueType=float,
orientation="horizontal")
oasysgui.lineEdit(self.filter_box,
self,
"x",
"Horizontal coordinate of center [m]",
labelWidth=260,
valueType=float,
orientation="horizontal")
oasysgui.lineEdit(self.filter_box,
self,
"y",
"Vertical coordinate of center [m]",
labelWidth=260,
valueType=float,
orientation="horizontal")
def build_gui(self):
box = oasysgui.widgetBox(self.controlArea,
self.name + " Input Parameters",
orientation="vertical",
width=self.CONTROL_AREA_WIDTH - 5)
idx = -1
#widget index 0
idx += 1
box1 = gui.widgetBox(box)
gui.comboBox(box1,
self,
"ITUBE",
label=self.unitLabels()[idx],
addSpace=False,
items=['Mo', 'Rh', 'W'],
valueType=int,
orientation="horizontal",
labelWidth=330)
self.show_at(self.unitFlags()[idx], box1)
#widget index 1
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1,
self,
"VOLTAGE",
label=self.unitLabels()[idx],
addSpace=False,
valueType=float,
orientation="horizontal",
labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
def __init__(self):
super().__init__()
self.le_p = oasysgui.lineEdit(self.tab_bas, self, "p", "Distance Source - DCM center (P)", labelWidth=280, valueType=float, orientation="horizontal")
self.le_q = oasysgui.lineEdit(self.tab_bas, self, "q", "Distance DCM center - Image plane (Q)", labelWidth=280, valueType=float, orientation="horizontal")
self.le_separation = oasysgui.lineEdit(self.tab_bas, self, "separation", "Separation between the Crystals\n(from center of 1st C. to center of 2nd C.)", labelWidth=280, valueType=float,
orientation="horizontal")
oasysgui.lineEdit(self.tab_bas, self, "photon_energy_ev", "Photon Energy [eV]", labelWidth=280, valueType=float, orientation="horizontal")
file_box = oasysgui.widgetBox(self.tab_bas, "", addSpace=True, orientation="horizontal", height=20)
self.le_reflectivity_file = oasysgui.lineEdit(file_box, self, "reflectivity_file", "Reflectivity File", labelWidth=150, valueType=str, orientation="horizontal")
gui.button(file_box, self, "...", callback=self.selectFilePrerefl)
self.tab_crystals = gui.tabWidget(self.tab_bas)
tab_first_crystal = oasysgui.createTabPage(self.tab_crystals, "First Crystal")
tab_second_crystal = oasysgui.createTabPage(self.tab_crystals, "Second Crystal")
self.crystal_1_box = CrystalBox(dcm=self,
parent=tab_first_crystal,
has_finite_dimensions=self.has_finite_dimensions[0],
dimensions=self.dimensions[0])
self.crystal_2_box = CrystalBox(dcm=self,
parent=tab_second_crystal,
has_finite_dimensions=self.has_finite_dimensions[1],
dimensions=self.dimensions[1])
def __init__(self):
super().__init__()
geom = QApplication.desktop().availableGeometry()
self.setGeometry(
QRect(round(geom.width() * 0.05), round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMinimumHeight(self.geometry().height())
self.setMinimumWidth(self.geometry().width())
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
self.controlArea.setFixedWidth(self.MAX_WIDTH - 10)
self.controlArea.setFixedHeight(self.MAX_HEIGHT - 10)
main_box = oasysgui.widgetBox(
self.controlArea,
"WISE Source to Wofry Wavefront Converter",
orientation="vertical",
width=self.CONTROL_AREA_WIDTH - 5,
height=110)
oasysgui.lineEdit(main_box,
self,
"number_of_points",
"Number of Points",
labelWidth=260,
valueType=float,
orientation="horizontal")
gui.button(main_box, self, "Compute", height=40, callback=self.compute)
def __init__(self):
left_box_1 = oasysgui.widgetBox(self.controlArea, "Power Calculation", addSpace=True, orientation="vertical", width=380, height=120)
gui.comboBox(left_box_1, self, "redo_calculation", label="Recalculate Intensity",
items=["No", "Yes"], labelWidth=260, sendSelectedValue=False, orientation="horizontal")
gui.rubber(self.controlArea)
def build_gui(self):
box = oasysgui.widgetBox(self.controlArea, self.name + " Input Parameters",orientation="vertical", width=self.CONTROL_AREA_WIDTH-5)
idx = -1
#widget index 0
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "VOLTAGE",
label=self.unitLabels()[idx], addSpace=False,
valueType=float, validator=QDoubleValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
#widget index 1
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "RIPPLE",
label=self.unitLabels()[idx], addSpace=False,
valueType=float, validator=QDoubleValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
#widget index 2
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "AL_FILTER",
label=self.unitLabels()[idx], addSpace=False,
valueType=float, validator=QDoubleValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
def __init__(self):
super().__init__()
layout = QVBoxLayout()
self.code_area = oasysgui.textArea(readOnly=False)
self.code_area.setStyleSheet(
"background-color: white; font-family: Courier, monospace;")
self.console = PythonConsole(self.__dict__, self)
button_box = oasysgui.widgetBox(None,
"",
addSpace=True,
orientation="horizontal")
gui.button(button_box,
self,
"Run Script",
callback=self.execute_script,
height=40)
gui.button(button_box,
self,
"Save Script to File",
callback=self.save_script,
height=40)
layout.addWidget(self.code_area)
layout.addWidget(self.console)
layout.addWidget(button_box)
self.setLayout(layout)
def __init__(self):
super().__init__()
geom = QApplication.desktop().availableGeometry()
self.setGeometry(
QRect(round(geom.width() * 0.05), round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
gui.separator(self.controlArea)
button_box = oasysgui.widgetBox(self.controlArea,
"",
addSpace=False,
orientation="horizontal")
button = gui.button(button_box,
self,
"Load HDF5 file",
callback=self.load_file)
button.setFixedHeight(45)
input_box_l = oasysgui.widgetBox(self.controlArea,
"Input",
addSpace=True,
orientation="horizontal",
height=self.TABS_AREA_HEIGHT)
self.le_hdf5_file_name = oasysgui.lineEdit(input_box_l,
self,
"hdf5_file_name",
"HDF5 File Name",
labelWidth=120,
valueType=str,
orientation="horizontal")
gui.button(input_box_l, self, "...", callback=self.selectPlotXYFile)
self.tree_view = Hdf5TreeViewWidget()
self.mainArea.layout().addWidget(self.tree_view)
gui.rubber(self.mainArea)
def callResetSettings(self):
if ConfirmDialog.confirmed(parent=self,
message="Confirm Reset of the Fields?"):
self.resetSettings()
while self.tab_mirrors.count() > 0:
self.tab_mirrors.removeTab(0)
tab_vertical = oasysgui.widgetBox(self.tab_mirrors,
addToLayout=0,
margin=4)
tab_horizontal = oasysgui.widgetBox(self.tab_mirrors,
addToLayout=0,
margin=4)
self.v_box = MirrorBox(
kb=self,
parent=tab_vertical,
grazing_angles_mrad=self.grazing_angles_mrad[0],
shape=self.shape[0],
has_finite_dimensions=self.has_finite_dimensions[0],
dimensions=self.dimensions[0],
reflectivity_kind=self.reflectivity_kind[0],
reflectivity_files=self.reflectivity_files[0],
has_surface_error=self.has_surface_error[0],
surface_error_files=self.surface_error_files[0])
self.h_box = MirrorBox(
kb=self,
parent=tab_horizontal,
grazing_angles_mrad=self.grazing_angles_mrad[1],
shape=self.shape[1],
has_finite_dimensions=self.has_finite_dimensions[1],
dimensions=self.dimensions[1],
reflectivity_kind=self.reflectivity_kind[1],
reflectivity_files=self.reflectivity_files[1],
has_surface_error=self.has_surface_error[1],
surface_error_files=self.surface_error_files[1])
self.tab_mirrors.addTab(tab_vertical, "Vertical Focusing Mirror")
self.tab_mirrors.addTab(tab_horizontal,
"Horizontal Focusing Mirror")
self.setupUI()
def __init__(self):
super().__init__()
self.runaction = widget.OWAction("Read COMSYL File", self)
self.runaction.triggered.connect(self.read_file)
self.addAction(self.runaction)
self.setFixedWidth(590)
self.setFixedHeight(150)
left_box_1 = oasysgui.widgetBox(self.controlArea,
"COMSYL File Selection",
addSpace=True,
orientation="vertical",
width=570,
height=70)
figure_box = oasysgui.widgetBox(left_box_1,
"",
addSpace=True,
orientation="horizontal",
width=550,
height=35)
self.le_beam_file_name = oasysgui.lineEdit(figure_box,
self,
"filename",
"COMSYL File Name",
labelWidth=120,
valueType=str,
orientation="horizontal")
self.le_beam_file_name.setFixedWidth(330)
gui.button(figure_box, self, "...", callback=self.selectFile)
#gui.separator(left_box_1, height=20)
button = gui.button(self.controlArea,
self,
"Read COMSYL File",
callback=self.read_file)
button.setFixedHeight(45)
gui.rubber(self.controlArea)
def __init__(self, parent):
super().__init__(parent)
self.pythonScript = QTextEdit()
self.pythonScript.setReadOnly(False) # asked by Manolo
self.pythonScript.setMaximumHeight(340)
script_box = oasysgui.widgetBox(self, "", addSpace=False, orientation="vertical", height=545, width=750)
script_box.layout().addWidget(self.pythonScript)
console_box = oasysgui.widgetBox(script_box, "", addSpace=False, orientation="vertical", height=150, width=750)
self.console = PythonConsole(self.__dict__, self)
console_box.layout().addWidget(self.console)
button_box = oasysgui.widgetBox(script_box, "", addSpace=False, orientation="horizontal")
gui.button(button_box, self, "Run Script", callback=self.execute_script, height=35)
gui.button(button_box, self, "Save Script to File", callback=self.save_script, height=35)
def __init__(self):
super().__init__()
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
tabs_setting = oasysgui.tabWidget(self.controlArea)
tabs_setting.setFixedHeight(self.TABS_AREA_HEIGHT)
tabs_setting.setFixedWidth(self.CONTROL_AREA_WIDTH-5)
tab_bas = oasysgui.createTabPage(tabs_setting, "Basic Setting")
tab_sou = oasysgui.createTabPage(tabs_setting, "Source Setting")
left_box_1 = oasysgui.widgetBox(tab_bas, "Monte Carlo and Energy Spectrum", addSpace=True, orientation="vertical")
oasysgui.lineEdit(left_box_1, self, "number_of_rays", "Number of Rays", tooltip="Number of Rays", labelWidth=250, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "seed", "Seed", tooltip="Seed", labelWidth=250, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "energy", "Set undulator to energy [eV]", tooltip="Set undulator to energy [eV]", labelWidth=250, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "delta_e", "Delta Energy [eV]", tooltip="Delta Energy [eV]", labelWidth=250, valueType=float, orientation="horizontal")
left_box_2 = oasysgui.widgetBox(tab_sou, "Machine Parameters", addSpace=True, orientation="vertical")
self.le_sigma_x = oasysgui.lineEdit(left_box_2, self, "sigma_x", "Size RMS H", labelWidth=250, tooltip="Size RMS H", valueType=float, orientation="horizontal")
self.le_sigma_z = oasysgui.lineEdit(left_box_2, self, "sigma_z", "Size RMS V", labelWidth=250, tooltip="Size RMS V", valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_2, self, "sigma_divergence_x", "Divergence RMS H [rad]", labelWidth=250, tooltip="Divergence RMS H [rad]", valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_2, self, "sigma_divergence_z", "Divergence RMS V [rad]", labelWidth=250, tooltip="Divergence RMS V [rad]", valueType=float, orientation="horizontal")
left_box_3 = oasysgui.widgetBox(tab_sou, "Undulator Parameters", addSpace=True, orientation="vertical")
oasysgui.lineEdit(left_box_3, self, "undulator_length", "Undulator Length [m]", labelWidth=250, tooltip="Undulator Length [m]", valueType=float, orientation="horizontal")
adv_other_box = oasysgui.widgetBox(tab_bas, "Optional file output", addSpace=False, orientation="vertical")
gui.comboBox(adv_other_box, self, "file_to_write_out", label="Files to write out", labelWidth=120,
items=["None", "Begin.dat", "Debug (begin.dat + start.xx/end.xx)"],
sendSelectedValue=False, orientation="horizontal")
gui.rubber(self.controlArea)
gui.rubber(self.mainArea)
def __init__(self, image_url):
super(FigureWidget, self).__init__()
self.setFixedWidth(600)
self.setFixedHeight(600)
box_general = oasysgui.widgetBox(self, "", addSpace=False, orientation="vertical", width=600, height=600)
gui.separator(box_general, height=30)
box_top = oasysgui.widgetBox(box_general, "", addSpace=False, orientation="vertical", width=600, height=50)
title = gui.label(box_top, self, " Standing Waves plot")
font = QFont(title.font())
font.setBold(True)
font.setPointSize(36)
palette = QPalette(title.palette())
palette.setColor(QPalette.Foreground, QColor('blue'))
title.setFont(font)
title.setPalette(palette)
gui.separator(box_general, height=10)
box_center = oasysgui.widgetBox(box_general, "", addSpace=False, orientation="horizontal", width=600)
box_label = oasysgui.widgetBox(box_center, "", addSpace=False, orientation="vertical", width=50)
oasysgui.widgetBox(box_label, "", addSpace=False, orientation="vertical", height=50)
label_y_axis = VerticalLabel("Incidence Angle", 200, 50)
font = QFont(label_y_axis.font())
font.setBold(True)
font.setPointSize(24)
label_y_axis.setFont(font)
#label_y_axis.setFixedHeight(200)
#label_y_axis.setFixedWidth(50)
box_label.layout().addWidget(label_y_axis)
image_label = QLabel(box_center)
image = QImage()
image.loadFromData(HttpManager.send_xray_server_direct_request("/" + image_url, decode=False))
image_label.setPixmap(QPixmap(image))
box_center.layout().addWidget(image_label)
box_bottom = oasysgui.widgetBox(box_general, "", addSpace=False, orientation="horizontal", width=600)
label_x_axis = gui.label(box_bottom, self, " Offset [Å]")
font = QFont(label_x_axis.font())
font.setBold(True)
font.setPointSize(24)
label_x_axis.setFont(font)
def callResetSettings(self):
if ConfirmDialog.confirmed(parent=self, message="Confirm Reset of the Fields?"):
self.resetSettings()
while self.tab_crystals.count() > 0:
self.tab_crystals.removeTab(0)
tab_first_crystal = oasysgui.widgetBox(self.tab_crystals, addToLayout=0, margin=4)
tab_second_crystal = oasysgui.widgetBox(self.tab_crystals, addToLayout=0, margin=4)
self.crystal_1_box = CrystalBox(dcm=self,
parent=tab_first_crystal,
has_finite_dimensions=self.has_finite_dimensions[0],
dimensions=self.dimensions[0])
self.crystal_2_box = CrystalBox(dcm=self,
parent=tab_second_crystal,
has_finite_dimensions=self.has_finite_dimensions[1],
dimensions=self.dimensions[1])
self.tab_crystals.addTab(tab_first_crystal, "First Crystal")
self.tab_crystals.addTab(tab_second_crystal, "Second Crystal")
self.setupUI()
def __init__(self,
dcm=None,
parent=None,
has_finite_dimensions=0,
dimensions=[0.0, 0.0]):
super().__init__(parent)
self.setLayout(QtGui.QVBoxLayout())
self.layout().setAlignment(Qt.AlignTop)
self.dcm = dcm
self.setFixedWidth(self.dcm.CONTROL_AREA_WIDTH-20)
self.setFixedHeight(120)
self.has_finite_dimensions = has_finite_dimensions
self.mirror_width = dimensions[0]
self.mirror_length = dimensions[1]
mirror_box = oasysgui.widgetBox(self, "Crystal Input Parameters", addSpace=False, orientation="vertical", height=110)
gui.comboBox(mirror_box, self, "has_finite_dimensions", label="Dimensions", labelWidth=260,
items=["Finite", "Infinite"], sendSelectedValue=False, orientation="horizontal", callback=self.set_dimensions)
self.dimension_box = oasysgui.widgetBox(mirror_box, "", addSpace=False, orientation="vertical", height=50)
self.dimension_box_empty = oasysgui.widgetBox(mirror_box, "", addSpace=False, orientation="vertical", height=50)
self.le_mirror_width = oasysgui.lineEdit(self.dimension_box, self, "mirror_width", "Crystal Width", labelWidth=260, valueType=float, orientation="horizontal",
callback=self.dcm.dump_dimensions_0)
self.le_mirror_length = oasysgui.lineEdit(self.dimension_box, self, "mirror_length", "Crystal Length", labelWidth=260, valueType=float, orientation="horizontal",
callback=self.dcm.dump_dimensions_1)
self.set_dimensions()
self.is_on_init = False
def __init__(self, show_automatic_box=True):
super().__init__(show_automatic_box)
self.setFixedWidth(420)
self.setFixedHeight(250)
gen_box = gui.widgetBox(self.controlArea, "Rotation Angle Calculator", addSpace=True, orientation="vertical")
button_box = oasysgui.widgetBox(gen_box, "", addSpace=False, orientation="horizontal")
button = gui.button(button_box, self, "Calculate Rotation Angle", callback=self.calculate_rotation_angle)
font = QFont(button.font())
font.setBold(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
result_box = oasysgui.widgetBox(gen_box, "Result", addSpace=False, orientation="horizontal")
le_angle = oasysgui.lineEdit(result_box, self, "rotation_angle", "Calculated Rotation Angle",
labelWidth=250, valueType=float, orientation="horizontal")
le_angle.setReadOnly(True)
def callResetSettings(self):
if ConfirmDialog.confirmed(parent=self, message="Confirm Reset of the Fields?"):
self.resetSettings()
while self.tab_mirrors.count() > 0:
self.tab_mirrors.removeTab(0)
tab_vertical = oasysgui.widgetBox(self.tab_mirrors, addToLayout=0, margin=4)
tab_horizontal = oasysgui.widgetBox(self.tab_mirrors, addToLayout=0, margin=4)
self.v_box = MirrorBox(kb=self,
parent=tab_vertical,
grazing_angles_mrad=self.grazing_angles_mrad[0],
shape=self.shape[0],
has_finite_dimensions=self.has_finite_dimensions[0],
dimensions=self.dimensions[0],
reflectivity_kind=self.reflectivity_kind[0],
reflectivity_files=self.reflectivity_files[0],
has_surface_error=self.has_surface_error[0],
surface_error_files=self.surface_error_files[0])
self.h_box = MirrorBox(kb=self,
parent=tab_horizontal,
grazing_angles_mrad=self.grazing_angles_mrad[1],
shape=self.shape[1],
has_finite_dimensions=self.has_finite_dimensions[1],
dimensions=self.dimensions[1],
reflectivity_kind=self.reflectivity_kind[1],
reflectivity_files=self.reflectivity_files[1],
has_surface_error=self.has_surface_error[1],
surface_error_files=self.surface_error_files[1])
self.tab_mirrors.addTab(tab_vertical, "Vertical Focusing Mirror")
self.tab_mirrors.addTab(tab_horizontal, "Horizontal Focusing Mirror")
self.setupUI()
def crl_insert_before(self):
current_index = self.tab_crls.currentIndex()
if ConfirmDialog.confirmed(parent=self, message="Confirm Insertion of a new element before " + self.tab_crls.tabText(current_index) + "?"):
tab_crl = oasysgui.widgetBox(self.tab_crls, addToLayout=0, margin=4)
crl_box = CRLBox(transfocator=self, parent=tab_crl)
crl_box.after_change_workspace_units()
self.tab_crls.insertTab(current_index, tab_crl, "TEMP")
self.crl_box_array.insert(current_index, crl_box)
self.dumpSettings()
for index in range(current_index, self.tab_crls.count()):
self.tab_crls.setTabText(index, "C.R.L " + str(index + 1))
self.tab_crls.setCurrentIndex(current_index)
def build_gui(self):
box = oasysgui.widgetBox(self.controlArea, self.name + " Input Parameters", orientation="vertical", width=self.CONTROL_AREA_WIDTH-5)
idx = -1
#widget index 1
idx += 1
box1 = gui.widgetBox(box)
gui.comboBox(box1, self, "MAT_FLAG",
label=self.unitLabels()[idx], addSpace=False,
items=['Element(formula)', 'Mixture(formula)'],
valueType=int, orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
#widget index 3
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "DESCRIPTOR",
label=self.unitLabels()[idx], orientation="horizontal", addSpace=False)
self.show_at(self.unitFlags()[idx], box1)
#widget index 5
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "GRIDSTART",
label=self.unitLabels()[idx], addSpace=False,
valueType=float, validator=QDoubleValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
#widget index 6
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "GRIDEND",
label=self.unitLabels()[idx], addSpace=False,
valueType=float, validator=QDoubleValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
#widget index 7
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "GRIDN",
label=self.unitLabels()[idx], addSpace=False,
valueType=int, validator=QIntValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
def build_gui(self):
box = oasysgui.widgetBox(self.controlArea, self.name + " Input Parameters", orientation="vertical", width=self.CONTROL_AREA_WIDTH-5)
idx = -1
#widget index 0
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "TITLE",
label=self.unitLabels()[idx], addSpace=False, orientation="horizontal")
self.show_at(self.unitFlags()[idx], box1)
#widget index 1
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "TEMPERATURE",
label=self.unitLabels()[idx], addSpace=False,
valueType=float, validator=QDoubleValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
#widget index 2
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "E_MIN",
label=self.unitLabels()[idx], addSpace=False,
valueType=float, validator=QDoubleValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
#widget index 3
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "E_MAX",
label=self.unitLabels()[idx], addSpace=False,
valueType=float, validator=QDoubleValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
#widget index 4
idx += 1
box1 = gui.widgetBox(box)
oasysgui.lineEdit(box1, self, "NPOINTS",
label=self.unitLabels()[idx], addSpace=False,
valueType=int, validator=QIntValidator(), orientation="horizontal", labelWidth=250)
self.show_at(self.unitFlags()[idx], box1)
def __init__(self):
self.runaction = OWAction("Start Loop", self)
self.runaction.triggered.connect(self.startLoop)
self.addAction(self.runaction)
self.runaction = OWAction("Interrupt", self)
self.runaction.triggered.connect(self.stopLoop)
self.addAction(self.runaction)
self.setFixedWidth(400)
self.setFixedHeight(185)
button_box = gui.widgetBox(self.controlArea, "", addSpace=True, orientation="horizontal")
self.start_button = gui.button(button_box, self, "Start Loop", callback=self.startLoop)
self.start_button.setFixedHeight(45)
stop_button = gui.button(button_box, self, "Interrupt", callback=self.stopLoop)
stop_button.setFixedHeight(45)
font = QtGui.QFont(stop_button.font())
font.setBold(True)
stop_button.setFont(font)
palette = QtGui.QPalette(stop_button.palette()) # make a copy of the palette
palette.setColor(QtGui.QPalette.ButtonText, QtGui.QColor('red'))
stop_button.setPalette(palette) # assign new palette
left_box_1 = oasysgui.widgetBox(self.controlArea, "Loop Management", addSpace=True, orientation="vertical", width=380, height=100)
oasysgui.lineEdit(left_box_1, self, "number_of_new_beams", "Number of new Beams", labelWidth=250, valueType=int, orientation="horizontal")
self.le_current_new_beam = oasysgui.lineEdit(left_box_1, self, "current_new_beam", "Current New Beam", labelWidth=250, valueType=int, orientation="horizontal")
self.le_current_new_beam.setReadOnly(True)
font = QtGui.QFont(self.le_current_new_beam.font())
font.setBold(True)
self.le_current_new_beam.setFont(font)
palette = QtGui.QPalette(self.le_current_new_beam.palette()) # make a copy of the palette
palette.setColor(QtGui.QPalette.Text, QtGui.QColor('dark blue'))
palette.setColor(QtGui.QPalette.Base, QtGui.QColor(243, 240, 160))
self.le_current_new_beam.setPalette(palette)
gui.rubber(self.controlArea)
def __init__(self):
super().__init__()
tabs_button_box = oasysgui.widgetBox(self.tab_bas, "", addSpace=False, orientation="horizontal")
btns = [gui.button(tabs_button_box, self, "Insert C.R.L. Before", callback=self.crl_insert_before),
gui.button(tabs_button_box, self, "Insert C.R.L. After", callback=self.crl_insert_after),
gui.button(tabs_button_box, self, "Remove C.R.L.", callback=self.crl_remove)]
for btn in btns:
btn.setFixedHeight(20)
self.tab_crls = gui.tabWidget(self.tab_bas)
self.crl_box_array = []
for index in range(len(self.p)):
tab_crl = oasysgui.createTabPage(self.tab_crls, "C.R.L. " + str(index + 1))
crl_box = CRLBox(transfocator=self,
parent=tab_crl,
nlenses=self.nlenses[index],
slots_empty=self.slots_empty[index],
thickness=self.thickness[index],
p=self.p[index],
q=self.q[index],
surface_shape=self.surface_shape[index],
convex_to_the_beam=self.convex_to_the_beam[index],
has_finite_diameter=self.has_finite_diameter[index],
diameter=self.diameter[index],
is_cylinder=self.is_cylinder[index],
cylinder_angle=self.cylinder_angle[index],
ri_calculation_mode=self.ri_calculation_mode[index],
prerefl_file=self.prerefl_file[index],
refraction_index=self.refraction_index[index],
attenuation_coefficient=self.attenuation_coefficient[index],
radius=self.radius[index],
interthickness=self.interthickness[index],
use_ccc=self.use_ccc[index])
self.crl_box_array.append(crl_box)
def __init__(self, show_automatic_box=False):
super().__init__(show_automatic_box=show_automatic_box)
self.runaction = widget.OWAction("Copy Source Parameters", self)
self.runaction.triggered.connect(self.copy_src_parameters)
self.addAction(self.runaction)
self.runaction = widget.OWAction("Paste Source Parameters", self)
self.runaction.triggered.connect(self.paste_src_parameters)
self.addAction(self.runaction)
self.runaction = widget.OWAction("Run Shadow/Source", self)
self.runaction.triggered.connect(self.runShadowSource)
self.addAction(self.runaction)
self.general_options_box.setVisible(False)
button_box = oasysgui.widgetBox(self.controlArea, "", addSpace=False, orientation="horizontal")
button = gui.button(button_box, self, "Run Shadow/Source", callback=self.runShadowSource)
font = QFont(button.font())
font.setBold(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button = gui.button(button_box, self, "Reset Fields", callback=self.callResetSettings)
font = QFont(button.font())
font.setItalic(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Red'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button.setFixedWidth(150)
gui.separator(self.controlArea)
def callResetSettings(self):
if ConfirmDialog.confirmed(parent=self, message="Confirm Reset of the Fields?\n\nWarning: C.R.L. stack will be regenerated"):
self.resetSettings()
while self.tab_crls.count() > 0:
self.tab_crls.removeTab(0)
self.crl_box_array = []
for index in range(len(self.p)):
tab_crl = oasysgui.widgetBox(self.tab_crls, addToLayout=0, margin=4)
crl_box = CRLBox(transfocator=self,
parent=tab_crl,
nlenses=self.nlenses[index],
slots_empty=self.slots_empty[index],
thickness=self.thickness[index],
p=self.p[index],
q=self.q[index],
surface_shape=self.surface_shape[index],
convex_to_the_beam=self.convex_to_the_beam[index],
has_finite_diameter=self.has_finite_diameter[index],
diameter=self.diameter[index],
is_cylinder=self.is_cylinder[index],
cylinder_angle=self.cylinder_angle[index],
ri_calculation_mode=self.ri_calculation_mode[index],
prerefl_file=self.prerefl_file[index],
refraction_index=self.refraction_index[index],
attenuation_coefficient=self.attenuation_coefficient[index],
radius=self.radius[index],
interthickness=self.interthickness[index],
use_ccc=self.use_ccc[index])
self.tab_crls.addTab(tab_crl, "C.R.L " + str(index + 1))
self.crl_box_array.append(crl_box)
self.setupUI()
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "X0h-Search Request Form", addSpace=True, orientation="vertical",
width=400, height=630)
left_box_2 = oasysgui.widgetBox(left_box_1, "X-rays", addSpace=True, orientation="horizontal", width=380, height=110)
left_box_2_1 = oasysgui.widgetBox(left_box_2, "", addSpace=True, orientation="vertical", width=150, height=110)
gui.radioButtons(left_box_2_1, self, "xway", ["Wavelength (Å)", "Energy (keV)", "Characteristic line"], callback=self.set_xway )
self.box_wave = oasysgui.widgetBox(left_box_2, "", addSpace=True, orientation="vertical", width=190)
gui.separator(self.box_wave, height=10)
oasysgui.lineEdit(self.box_wave, self, "wave", label="", labelWidth=0, addSpace=False, valueType=float, orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2, "", addSpace=True, orientation="horizontal", width=190, height=110)
gui.separator(self.box_line, height=120)
XRayServerGui.combobox_text(self.box_line, self, "line", label="", labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.line)
button = gui.button( self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
left_box_3 = oasysgui.widgetBox(left_box_1, "Crystal", addSpace=True, orientation="horizontal", width=380, height=60)
self.box_crystal = oasysgui.widgetBox(left_box_3, "", addSpace=True, orientation="horizontal", width=210)
XRayServerGui.combobox_text(self.box_crystal, self, "code", label="", labelWidth=0,
items=self.get_crystals(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.code)
button = gui.button( self.box_crystal, self, "?", callback=self.help_crystals)
button.setFixedWidth(15)
left_box_4 = oasysgui.widgetBox(left_box_1, "Bragg Planes Range", addSpace=True, orientation="horizontal", width=380, height=60)
oasysgui.lineEdit(left_box_4, self, "hkl11", label="From", labelWidth=50, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4, self, "hkl12", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4, self, "hkl13", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4, self, "hkl21", label=" To", labelWidth=50, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4, self, "hkl22", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4, self, "hkl23", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
left_box_7 = oasysgui.widgetBox(left_box_1, "Bragg Angle Range", addSpace=True, orientation="horizontal", width=380, height=60)
oasysgui.lineEdit(left_box_7, self, "qb1", label="From", labelWidth=80, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_7, self, "qb2", label=" To", labelWidth=80, addSpace=False, valueType=float, orientation="horizontal")
tab_central = oasysgui.tabWidget(left_box_1)
tab_1 = oasysgui.createTabPage(tab_central, "Intensity Control")
tab_2 = oasysgui.createTabPage(tab_central, "Find only Bragg planes making certain angles to the surface")
left_box_5 = oasysgui.widgetBox(tab_1, "", addSpace=True, orientation="vertical", width=370, height=250)
gui.separator(left_box_5)
oasysgui.lineEdit(left_box_5, self, "prcmin", label="Minimum |xh/x0| (%)", labelWidth=250, addSpace=False, valueType=float, orientation="horizontal")
left_box_5_1 = oasysgui.widgetBox(left_box_5, "Database Options for dispersion corrections df1, df2", addSpace=True, orientation="vertical", width=370, height=185)
gui.radioButtons(left_box_5_1, self, "df1df2", ["Auto (Henke at low energy, X0h at mid, Brennan-Cowan\nat high)",
"Use X0h data (5-25 keV or 0.5-2.5 A), recommended for\nBragg diffraction",
"Use Henke data (0.01-30 keV or 0.4-1200 A),\nrecommended for soft x-rays",
"Use Brennan-Cowan data (0.03-700 keV or 0.02-400 A)"])
left_box_6 = oasysgui.widgetBox(tab_2, "", addSpace=True, orientation="vertical", width=370, height=255)
gui.separator(left_box_6)
left_box_6_1 = oasysgui.widgetBox(left_box_6, "", addSpace=False, orientation="horizontal", width=370, height=30)
oasysgui.lineEdit(left_box_6_1, self, "base1", label="Surface Plane Indices", labelWidth=200, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_6_1, self, "base2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_6_1, self, "base3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
gui.radioButtons(left_box_6, self, "modesearch", ["Planes make angles from Theta1 to Theta2",
"Planes make angles from Theta1 to (Bragg_Angle - Theta2)",
"Planes make angles from (Bragg_Angle - Theta1)\nto (Bragg_Angle - Theta2)"])
gui.separator(left_box_6, height=10)
left_box_6_2 = oasysgui.widgetBox(left_box_6, "", addSpace=True, orientation="horizontal", width=370, height=30)
oasysgui.lineEdit(left_box_6_2, self, "q1", label="Theta1", labelWidth=80, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_6_2, self, "q2", label=" Theta2", labelWidth=80, addSpace=False, valueType=float, orientation="horizontal")
button = gui.button(self.controlArea, self, "Find Planes!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.tab_output = oasysgui.createTabPage(self.tabs_widget, "X-ray Server Ouput")
self.x0h_output = QWebView(self.tab_output)
self.tab_output.layout().addWidget(self.x0h_output)
self.x0h_output.setFixedHeight(640)
self.x0h_output.setFixedWidth(740)
def __init__(self):
super().__init__()
self.runaction = widget.OWAction("Calculate Height Profile", self)
self.runaction.triggered.connect(self.calculate_heigth_profile_ni)
self.addAction(self.runaction)
self.runaction = widget.OWAction("Generate Height Profile File", self)
self.runaction.triggered.connect(self.generate_heigth_profile_file_ni)
self.addAction(self.runaction)
geom = QApplication.desktop().availableGeometry()
self.setGeometry(QRect(round(geom.width() * 0.05),
round(geom.height() * 0.05),
round(min(geom.width() * 0.98, self.MAX_WIDTH)),
round(min(geom.height() * 0.95, self.MAX_HEIGHT))))
self.setMaximumHeight(self.geometry().height())
self.setMaximumWidth(self.geometry().width())
# DABAM INITIALIZATION
self.server = dabam.dabam()
self.server.set_input_silent(True)
gui.separator(self.controlArea)
button_box = oasysgui.widgetBox(self.controlArea, "", addSpace=False, orientation="horizontal")
button = gui.button(button_box, self, "Calculate Height\nProfile", callback=self.calculate_heigth_profile)
button.setFixedHeight(45)
button = gui.button(button_box, self, "Generate Height\nProfile File", callback=self.generate_heigth_profile_file)
font = QFont(button.font())
font.setBold(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Blue'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
button.setFixedWidth(150)
button = gui.button(button_box, self, "Reset Fields", callback=self.call_reset_settings)
font = QFont(button.font())
font.setItalic(True)
button.setFont(font)
palette = QPalette(button.palette()) # make a copy of the palette
palette.setColor(QPalette.ButtonText, QColor('Dark Red'))
button.setPalette(palette) # assign new palette
button.setFixedHeight(45)
gui.separator(self.controlArea)
tabs_setting = gui.tabWidget(self.controlArea)
tabs_setting.setFixedHeight(self.TABS_AREA_HEIGHT)
tabs_setting.setFixedWidth(self.CONTROL_AREA_WIDTH-5)
tab_input = oasysgui.createTabPage(tabs_setting, "DABAM Search Setting")
tab_gener = oasysgui.createTabPage(tabs_setting, "DABAM Generation Setting")
tab_out = oasysgui.createTabPage(tabs_setting, "Output")
manual_box = oasysgui.widgetBox(tab_input, "Manual Entry", addSpace=True, orientation="vertical")
oasysgui.lineEdit(manual_box, self, "entry_number", "Entry Number",
labelWidth=300, valueType=int, orientation="horizontal")
gui.separator(manual_box)
button = gui.button(manual_box, self, "Retrieve Profile", callback=self.retrieve_profile)
button.setFixedHeight(35)
button.setFixedWidth(self.CONTROL_AREA_WIDTH-35)
input_box = oasysgui.widgetBox(tab_input, "Search Parameters", addSpace=True, orientation="vertical")
gui.comboBox(input_box, self, "shape", label="Mirror Shape", labelWidth=300,
items=["All", "Plane", "Cylindrical", "Elliptical", "Toroidal", "Spherical"],
sendSelectedValue=False, orientation="horizontal")
gui.separator(input_box)
input_box_1 = oasysgui.widgetBox(input_box, "", addSpace=True, orientation="horizontal")
oasysgui.lineEdit(input_box_1, self, "slope_error_from", "Slope Error From (" + u"\u03BC" + "rad)",
labelWidth=150, valueType=float, orientation="horizontal")
oasysgui.lineEdit(input_box_1, self, "slope_error_to", "To (" + u"\u03BC" + "rad)",
labelWidth=60, valueType=float, orientation="horizontal")
input_box_2 = oasysgui.widgetBox(input_box, "", addSpace=True, orientation="horizontal")
self.le_dimension_y_from = oasysgui.lineEdit(input_box_2, self, "dimension_y_from", "Mirror Length From",
labelWidth=150, valueType=float, orientation="horizontal")
self.le_dimension_y_to = oasysgui.lineEdit(input_box_2, self, "dimension_y_to", "To",
labelWidth=60, valueType=float, orientation="horizontal")
table_box = oasysgui.widgetBox(tab_input, "Search Results", addSpace=True, orientation="vertical", height=290)
self.overlay_search = Overlay(table_box, self.search_profiles)
self.overlay_search.hide()
button = gui.button(input_box, self, "Search", callback=self.overlay_search.show)
button.setFixedHeight(35)
button.setFixedWidth(self.CONTROL_AREA_WIDTH-35)
gui.comboBox(table_box, self, "use_undetrended", label="Use Undetrended Profile", labelWidth=300,
items=["No", "Yes"], callback=self.table_item_clicked, sendSelectedValue=False, orientation="horizontal")
gui.separator(table_box)
self.scrollarea = QScrollArea()
self.scrollarea.setMinimumWidth(self.CONTROL_AREA_WIDTH-35)
table_box.layout().addWidget(self.scrollarea, alignment=Qt.AlignHCenter)
self.table = QTableWidget(1, 5)
self.table.setAlternatingRowColors(True)
self.table.horizontalHeader().setResizeMode(QHeaderView.Fixed)
self.table.verticalHeader().setVisible(False)
self.table.setColumnWidth(0, 40)
self.table.setColumnWidth(1, 70)
self.table.setColumnWidth(2, 70)
self.table.setColumnWidth(3, 85)
self.table.setColumnWidth(4, 80)
self.table.resizeRowsToContents()
self.table.setSelectionBehavior(QAbstractItemView.SelectRows)
self.table.itemClicked.connect(self.table_item_clicked)
self.scrollarea.setWidget(self.table)
self.scrollarea.setWidgetResizable(1)
output_profile_box = oasysgui.widgetBox(tab_gener, "Surface Generation Parameters", addSpace=True, orientation="vertical", height=270)
self.le_dimension_x = oasysgui.lineEdit(output_profile_box, self, "dimension_x", "Width",
labelWidth=300, valueType=float, orientation="horizontal")
self.le_step_x = oasysgui.lineEdit(output_profile_box, self, "step_x", "Step Width",
labelWidth=300, valueType=float, orientation="horizontal")
gui.comboBox(output_profile_box, self, "center_y", label="Center Profile in the middle of O.E.", labelWidth=300,
items=["No", "Yes"], sendSelectedValue=False, orientation="horizontal")
gui.comboBox(output_profile_box, self, "modify_y", label="Modify Length?", labelWidth=240,
items=["No", "Rescale to new length", "Fit to new length (fill or cut)"], callback=self.set_ModifyY, sendSelectedValue=False, orientation="horizontal")
self.modify_box_1 = oasysgui.widgetBox(output_profile_box, "", addSpace=False, orientation="vertical", height=50)
self.modify_box_2 = oasysgui.widgetBox(output_profile_box, "", addSpace=False, orientation="vertical", height=50)
oasysgui.lineEdit(self.modify_box_2, self, "scale_factor_y", "Scale Factor", labelWidth=300, valueType=float, orientation="horizontal")
self.modify_box_3 = oasysgui.widgetBox(output_profile_box, "", addSpace=False, orientation="vertical", height=50)
self.le_new_length = oasysgui.lineEdit(self.modify_box_3, self, "new_length", "New Length", labelWidth=300, valueType=float, orientation="horizontal")
oasysgui.lineEdit(self.modify_box_3, self, "filler_value", "Filler Value (if new length > profile length) [nm]", labelWidth=300, valueType=float, orientation="horizontal")
self.set_ModifyY()
gui.comboBox(output_profile_box, self, "renormalize_y", label="Renormalize Length Profile to different RMS", labelWidth=300,
items=["No", "Yes"], callback=self.set_RenormalizeY, sendSelectedValue=False, orientation="horizontal")
self.output_profile_box_1 = oasysgui.widgetBox(output_profile_box, "", addSpace=True, orientation="vertical")
gui.comboBox(self.output_profile_box_1, self, "error_type_y", label="Normalization to", labelWidth=270,
items=["Figure Error (nm)", "Slope Error (" + u"\u03BC" + "rad)"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(self.output_profile_box_1, self, "rms_y", "Rms Value",
labelWidth=300, valueType=float, orientation="horizontal")
self.set_RenormalizeY()
output_box = oasysgui.widgetBox(tab_gener, "Outputs", addSpace=True, orientation="vertical")
select_file_box = oasysgui.widgetBox(output_box, "", addSpace=True, orientation="horizontal")
self.le_heigth_profile_file_name = oasysgui.lineEdit(select_file_box, self, "heigth_profile_file_name", "Output File Name",
labelWidth=120, valueType=str, orientation="horizontal")
gui.button(select_file_box, self, "...", callback=self.selectFile)
self.shadow_output = QTextEdit()
self.shadow_output.setReadOnly(True)
out_box = oasysgui.widgetBox(tab_out, "System Output", addSpace=True, orientation="horizontal", height=500)
out_box.layout().addWidget(self.shadow_output)
gui.rubber(self.controlArea)
self.initializeTabs()
gui.rubber(self.mainArea)
self.overlay_search.raise_()
def initializeTabs(self):
self.tabs = gui.tabWidget(self.mainArea)
self.tab = [gui.createTabPage(self.tabs, "Info"),
gui.createTabPage(self.tabs, "Heights Profile"),
gui.createTabPage(self.tabs, "Slopes Profile"),
gui.createTabPage(self.tabs, "PSD Heights"),
gui.createTabPage(self.tabs, "CSD Heights"),
gui.createTabPage(self.tabs, "ACF"),
gui.createTabPage(self.tabs, "Generated 2D Profile"),
]
for tab in self.tab:
tab.setFixedHeight(self.IMAGE_HEIGHT)
tab.setFixedWidth(self.IMAGE_WIDTH)
self.plot_canvas = [None, None, None, None, None, None]
self.plot_canvas[0] = PlotWindow(roi=False, control=False, position=True, plugins=False)
self.plot_canvas[0].setDefaultPlotLines(True)
self.plot_canvas[0].setActiveCurveColor(color='darkblue')
self.plot_canvas[0].setGraphYLabel("Z [nm]")
self.plot_canvas[0].setGraphTitle("Heights Profile")
self.plot_canvas[0].setDrawModeEnabled(True, 'rectangle')
self.plot_canvas[0].setZoomModeEnabled(True)
self.plot_canvas[1] = PlotWindow(roi=False, control=False, position=True, plugins=False)
self.plot_canvas[1].setDefaultPlotLines(True)
self.plot_canvas[1].setActiveCurveColor(color='darkblue')
self.plot_canvas[1].setGraphYLabel("Zp [$\mu$rad]")
self.plot_canvas[1].setGraphTitle("Slopes Profile")
self.plot_canvas[1].setDrawModeEnabled(True, 'rectangle')
self.plot_canvas[1].setZoomModeEnabled(True)
self.plot_canvas[2] = PlotWindow(roi=False, control=False, position=True, plugins=False)
self.plot_canvas[2].setDefaultPlotLines(True)
self.plot_canvas[2].setActiveCurveColor(color='darkblue')
self.plot_canvas[2].setGraphXLabel("f [m^-1]")
self.plot_canvas[2].setGraphYLabel("PSD [m^3]")
self.plot_canvas[2].setGraphTitle("Power Spectral Density of Heights Profile")
self.plot_canvas[2].setDrawModeEnabled(True, 'rectangle')
self.plot_canvas[2].setZoomModeEnabled(True)
self.plot_canvas[2].setXAxisLogarithmic(True)
self.plot_canvas[2].setYAxisLogarithmic(True)
self.plot_canvas[3] = PlotWindow(roi=False, control=False, position=True, plugins=False)
self.plot_canvas[3].setDefaultPlotLines(True)
self.plot_canvas[3].setActiveCurveColor(color='darkblue')
self.plot_canvas[3].setGraphXLabel("f [m^-1]")
self.plot_canvas[3].setGraphYLabel("CSD [m^3]")
self.plot_canvas[3].setGraphTitle("Cumulative Spectral Density of Heights Profile")
self.plot_canvas[3].setDrawModeEnabled(True, 'rectangle')
self.plot_canvas[3].setZoomModeEnabled(True)
self.plot_canvas[3].setXAxisLogarithmic(True)
self.plot_canvas[4] = PlotWindow(roi=False, control=False, position=True, plugins=False)
self.plot_canvas[4].setDefaultPlotLines(True)
self.plot_canvas[4].setActiveCurveColor(color='darkblue')
self.plot_canvas[4].setGraphXLabel("Length [m]")
self.plot_canvas[4].setGraphYLabel("ACF")
self.plot_canvas[4].setGraphTitle("Autocovariance Function of Heights Profile")
self.plot_canvas[4].setDrawModeEnabled(True, 'rectangle')
self.plot_canvas[4].setZoomModeEnabled(True)
self.figure = Figure(figsize=(self.IMAGE_HEIGHT, self.IMAGE_HEIGHT)) # QUADRATA!
self.figure.patch.set_facecolor('white')
self.axis = self.figure.add_subplot(111, projection='3d')
self.axis.set_zlabel("Z [nm]")
self.plot_canvas[5] = FigureCanvasQTAgg(self.figure)
self.profileInfo = QTextEdit()
self.profileInfo.setReadOnly(True)
self.profileInfo.setMinimumHeight(self.IMAGE_HEIGHT-5)
self.profileInfo.setMaximumHeight(self.IMAGE_HEIGHT-5)
self.profileInfo.setMinimumWidth(310)
self.profileInfo.setMaximumWidth(310)
profile_box = oasysgui.widgetBox(self.tab[0], "", addSpace=True, orientation="horizontal", height = self.IMAGE_HEIGHT, width=320)
profile_box.layout().addWidget(self.profileInfo)
for index in range(0, 6):
self.tab[index+1].layout().addWidget(self.plot_canvas[index])
self.tabs.setCurrentIndex(1)
def __init__(self):
super().__init__()
self.controlArea.setFixedWidth(self.CONTROL_AREA_WIDTH)
tabs_setting = oasysgui.tabWidget(self.controlArea)
tabs_setting.setFixedHeight(self.TABS_AREA_HEIGHT)
tabs_setting.setFixedWidth(self.CONTROL_AREA_WIDTH-5)
tab_bas = oasysgui.createTabPage(tabs_setting, "Basic Setting")
tab_sou = oasysgui.createTabPage(tabs_setting, "Source Setting")
left_box_1 = oasysgui.widgetBox(tab_bas, "Monte Carlo and Energy Spectrum", addSpace=True, orientation="vertical")
oasysgui.lineEdit(left_box_1, self, "number_of_rays", "Number of Rays", tooltip="Number of Rays", labelWidth=260, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "seed", "Seed", tooltip="Seed", labelWidth=260, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "e_min", "Minimum Energy [eV]", tooltip="Minimum Energy [eV]", labelWidth=260, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_1, self, "e_max", "Maximum Energy [eV]", tooltip="Maximum Energy [eV]", labelWidth=260, valueType=float, orientation="horizontal")
gui.comboBox(left_box_1, self, "generate_polarization_combo", label="Generate Polarization", items=["Only Parallel", "Only Perpendicular", "Total"], labelWidth=260, orientation="horizontal")
left_box_2 = oasysgui.widgetBox(tab_sou, "Machine Parameters", addSpace=True, orientation="vertical")
self.le_sigma_x = oasysgui.lineEdit(left_box_2, self, "sigma_x", "Sigma X", labelWidth=260, tooltip="Sigma X", valueType=float, orientation="horizontal")
self.le_sigma_z = oasysgui.lineEdit(left_box_2, self, "sigma_z", "Sigma Z", labelWidth=260, tooltip="Sigma Z", valueType=float, orientation="horizontal")
self.le_emittance_x = oasysgui.lineEdit(left_box_2, self, "emittance_x", "Emittance X", labelWidth=260, tooltip="Emittance X", valueType=float, orientation="horizontal")
self.le_emittance_z = oasysgui.lineEdit(left_box_2, self, "emittance_z", "Emittance Z", labelWidth=260, tooltip="Emittance Z", valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_2, self, "energy", "Energy [GeV]", tooltip="Energy [GeV]", labelWidth=260, valueType=float, orientation="horizontal")
self.le_distance_from_waist_x = oasysgui.lineEdit(left_box_2, self, "distance_from_waist_x", "Distance from Waist X", labelWidth=260, tooltip="Distance from Waist X", valueType=float, orientation="horizontal")
self.le_distance_from_waist_z = oasysgui.lineEdit(left_box_2, self, "distance_from_waist_z", "Distance from Waist Z", labelWidth=260, tooltip="Distance from Waist Z", valueType=float, orientation="horizontal")
left_box_3 = oasysgui.widgetBox(tab_sou, "Bending Magnet Parameters", addSpace=True, orientation="vertical")
oasysgui.lineEdit(left_box_3, self, "magnetic_radius", "Magnetic Radius [m]", labelWidth=260, callback=self.calculateMagneticField, tooltip="Magnetic Radius [m]", valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3, self, "magnetic_field", "Magnetic Field [T]", labelWidth=260, callback=self.calculateMagneticRadius, tooltip="Magnetic Field [T]", valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3, self, "horizontal_half_divergence_from", "Horizontal half-divergence [rads] From [+]", labelWidth=260, tooltip="Horizontal half-divergence [rads] From [+]", valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3, self, "horizontal_half_divergence_to", "Horizontal half-divergence [rads] To [-]", labelWidth=260, tooltip="Horizontal half-divergence [rads] To [-]", valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3, self, "max_vertical_half_divergence_from", "Max vertical half-divergence [rads] From [+]", labelWidth=260, tooltip="Max vertical half-divergence [rads] From [+]", valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3, self, "max_vertical_half_divergence_to", "Max vertical half-divergence [rads] To [-]", labelWidth=260, tooltip="Max vertical half-divergence [rads] To [-]", valueType=float, orientation="horizontal")
gui.comboBox(left_box_3, self, "calculation_mode_combo", label="Calculation Mode", items=["Precomputed", "Exact"], labelWidth=260, orientation="horizontal")
left_box_4 = oasysgui.widgetBox(tab_bas, "Reject Rays", addSpace=True, orientation="vertical", height=120)
gui.comboBox(left_box_4, self, "optimize_source", label="Optimize Source", items=["No", "Using file with phase/space volume)", "Using file with slit/acceptance"],
labelWidth=120, callback=self.set_OptimizeSource, orientation="horizontal")
self.optimize_file_name_box = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="vertical")
file_box = oasysgui.widgetBox(self.optimize_file_name_box, "", addSpace=True, orientation="horizontal", height=25)
self.le_optimize_file_name = oasysgui.lineEdit(file_box, self, "optimize_file_name", "File Name", labelWidth=100, valueType=str, orientation="horizontal")
gui.button(file_box, self, "...", callback=self.selectOptimizeFile)
oasysgui.lineEdit(self.optimize_file_name_box, self, "max_number_of_rejected_rays", "Max number of rejected rays (set 0 for infinity)", labelWidth=280, valueType=int, orientation="horizontal")
self.set_OptimizeSource()
adv_other_box = oasysgui.widgetBox(tab_bas, "Optional file output", addSpace=False, orientation="vertical")
gui.comboBox(adv_other_box, self, "file_to_write_out", label="Files to write out", labelWidth=120,
items=["None", "Begin.dat", "Debug (begin.dat + start.xx/end.xx)"],
sendSelectedValue=False, orientation="horizontal")
gui.rubber(self.controlArea)
gui.rubber(self.mainArea)
