def plot_psd_noise(psd1, n11, psd2, n22, psd3, n33, per, st_chan):
fig = plt.figure(1, figsize=(9, 9))
plt.semilogx(per, psd1, label='PSD ' + (st_chan[0].id).replace('.', ' '))
plt.semilogx(per, n11, label='Noise ' + (st_chan[0].id).replace('.', ' '))
plt.semilogx(per, psd2, label='PSD ' + (st_chan[1].id).replace('.', ' '))
plt.semilogx(per, n22, label='Noise ' + (st_chan[1].id).replace('.', ' '))
plt.semilogx(per, psd3, label='PSD ' + (st_chan[2].id).replace('.', ' '))
plt.semilogx(per, n33, label='Noise ' + (st_chan[2].id).replace('.', ' '))
per2, nlnm = get_nlnm()
per2, nhnm = get_nhnm()
plt.semilogx(per2, nlnm, color='k', linewidth=2)
plt.semilogx(per2, nhnm, color='k', linewidth=2, label='NLNM/NHNM')
plt.xlabel('Period (s)')
plt.ylabel('PSD (dB rel. 1 $(m/s^2)^2/Hz$)', fontsize=16)
plt.legend(ncol=2)
plt.xlim((1. / 20., 300.))
#plt.title('PSD '+ str(st_chan[0].stats.starttime.julday).zfill(3) + ' ' +
# str(st_chan[0].stats.starttime.hour).zfill(2) + ':' +
# str(st_chan[0].stats.starttime.minute).zfill(2) + ' ' + st_chan[0].stats.component)
plt.savefig('PSD_' + str(st_chan[0].stats.starttime.julday).zfill(3) +
'_' + str(st_chan[0].stats.starttime.hour).zfill(2) + '_' +
st_chan[0].stats.channel + '.png')
plt.clf()
return
def get_petterson_bounds(periods):
"""`get_petterson_bounds([p1, ...pN])` -> [lowbound1, ... lowboundN], [highbound1, ..., highboundN]
`get_petterson_bounds(p)` -> lowbound, highbound
"""
l_periods, l_psd = get_nlnm()
h_periods, h_psd = get_nhnm()
periodz = np.log10(periods)
return np.interp(periodz, np.log10(l_periods[::-1]), l_psd[::-1]), \
np.interp(periodz, np.log10(h_periods[::-1]), h_psd[::-1])
def nlnm_noise(npts=1024,dt=1.0):
p, power = get_nlnm() # returns period and power of acceleration PSD
f_in = 1. / p
power_in = 10**(power/10.0)
f_interp = interp1d(f_in,power_in,bounds_error=None,fill_value='extrapolate')
freqs = np.abs(np.fft.fftfreq(npts, dt))
f = f_interp(freqs)
return make_some_noise(f, npts, dt)
def spectra(segment, config):
"""
Computes the signal and noise spectra, as dict of strings mapped to tuples (x0, dx, y).
Does not modify the segment's stream or traces in-place
:return: a dict with two keys, 'Signal' and 'Noise', mapped respectively to the tuples
(f0, df, frequencies)
:raise: an Exception if `segment.stream()` is empty or has more than one trace (possible
gaps/overlaps)
"""
from obspy.signal.spectral_estimation import get_nlnm, get_nhnm
o_trace = segment.stream()[0]
trace = o_trace # divide_sensitivity(o_trace, segment.inventory())
psd_periods = np.linspace(*config['psd_periods_gui'], endpoint=True)
# compute psd values for both noise and signal:
psd_s_y1 = psd(trace, segment.inventory(), psd_periods, obspy=True)
psd_s_y2 = psd(trace, segment.inventory(), psd_periods)
nlnm_x, nlnm_y = get_nlnm()
nlnm_x, nlnm_y = nlnm_x[::-1], nlnm_y[::-1]
nhnm_x, nhnm_y = get_nhnm()
nhnm_x, nhnm_y = nhnm_x[::-1], nhnm_y[::-1]
# sample at equally spaced periods. First get bounds:
# period_min = 2.0 / trace.stats.sampling_rate
# period_max = min(psd_n_x[-1] - psd_n_x[0], psd_s_x[-1] - psd_s_x[0])
#
# n_pts = config['num_psd_periods'] # 1024
# periods = np.linspace(period_min, period_max, n_pts, endpoint=True)
# psd_n_y = np.interp(np.log10(periods), np.log10(psd_n_x), psd_n_y)
# psd_s_y = np.interp(np.log10(periods), np.log10(psd_s_x), psd_s_y)
# nlnm_y = np.interp(np.log10(periods), np.log10(nlnm_x), nlnm_y)
# nhnm_y = np.interp(np.log10(periods), np.log10(nhnm_x), nhnm_y)
#
x0, dx = psd_periods[0], psd_periods[1] - psd_periods[0]
# replace NaNs with Nones:
# psd_s_y1_nan = np.isnan(psd_s_y1)
# if psd_s_y1_nan.any():
# psd_s_y1 = np.where(psd_s_y1_nan, None, psd_s_y1)
# psd_s_y2_nan = np.isnan(psd_s_y2)
# if psd_s_y2_nan.any():
# psd_s_y2 = np.where(psd_s_y2_nan, None, psd_s_y2)
return {
'PSD_obpsy': (x0, dx, psd_s_y1),
'PSD_sdaas': (x0, dx, psd_s_y2),
'nlnm': (x0, dx, np.interp(psd_periods, nlnm_x, nlnm_y)),
'nhnm': (x0, dx, np.interp(psd_periods, nhnm_x, nhnm_y))
}
def signal_noise_spectra(segment, config):
"""
Computes the signal and noise spectra, as dict of strings mapped to tuples (x0, dx, y).
Does not modify the segment's stream or traces in-place
:return: a dict with two keys, 'Signal' and 'Noise', mapped respectively to the tuples
(f0, df, frequencies)
:raise: an Exception if `segment.stream()` is empty or has more than one trace (possible
gaps/overlaps)
"""
o_trace = segment.stream()[0]
trace = o_trace # divide_sensitivity(o_trace, segment.inventory())
# get sn windows: PLEASE NOTE!! sn_windows might calculate the cumulative of segment.stream(),
# thus the latter should have been preprocessed (e.g. remove response, bandpass):
arrival_time = UTCDateTime(
segment.arrival_time) + config['sn_windows']['arrival_time_shift']
signal_trace, noise_trace = sn_split(
trace, # assumes stream has only one trace
arrival_time,
config['sn_windows']['signal_window'])
# compute psd values for both noise and signal:
psd_n_x, psd_n_y = psd(noise_trace, segment.inventory())
psd_s_x, psd_s_y = psd(signal_trace, segment.inventory())
nlnm_x, nlnm_y = get_nlnm()
nlnm_x, nlnm_y = nlnm_x[::-1], nlnm_y[::-1]
nhnm_x, nhnm_y = get_nhnm()
nhnm_x, nhnm_y = nhnm_x[::-1], nhnm_y[::-1]
# sample at equally spaced periods. First get bounds:
period_min = 2.0 / trace.stats.sampling_rate
period_max = min(psd_n_x[-1] - psd_n_x[0], psd_s_x[-1] - psd_s_x[0])
n_pts = config['num_psd_periods'] # 1024
periods = np.linspace(period_min, period_max, n_pts, endpoint=True)
psd_n_y = np.interp(np.log10(periods), np.log10(psd_n_x), psd_n_y)
psd_s_y = np.interp(np.log10(periods), np.log10(psd_s_x), psd_s_y)
nlnm_y = np.interp(np.log10(periods), np.log10(nlnm_x), nlnm_y)
nhnm_y = np.interp(np.log10(periods), np.log10(nhnm_x), nhnm_y)
x0, dx = periods[0], periods[1] - periods[0]
return {
'Signal': (x0, dx, psd_s_y),
'Noise': (x0, dx, psd_n_y),
'nlnm': (x0, dx, nlnm_y),
'nhnm': (x0, dx, nhnm_y)
}
def peterson_noise_model(unit='um/sec/sec'):
''' Return spectral density of the new seismic model of
Peterson using Obspy package.
This function just converts spectral density as a
function of frequencies from a function of period and
also changes unit of the spectral acording to given
option.
Parameters
----------
unit : `str`, optional
default is um.
Returns
-------
val : list of `list`
return the low noise model and the high noise model.
'''
from obspy.signal.spectral_estimation import get_nhnm, get_nlnm
lt, ldb = get_nlnm()
ht, hdb = get_nhnm()
lfreq, lacc = 1. / lt, 10**(ldb / 20) * 1e6
hfreq, hacc = 1. / ht, 10**(hdb / 20) * 1e6
if unit == 'um/sec/sec':
lfreq, lvel = lfreq, lacc
hfreq, hvel = hfreq, hacc
return [[lfreq, lvel], [hfreq, hvel]]
elif unit == 'm/sec/sec':
lfreq, lvel = lfreq, lacc * 1e-6
hfreq, hvel = hfreq, hacc * 1e-6
return [[lfreq, lvel], [hfreq, hvel]]
elif unit == 'um/sec':
lfreq, lvel = lfreq, lacc / (2.0 * np.pi * lfreq)
hfreq, hvel = hfreq, hacc / (2.0 * np.pi * hfreq)
return [[lfreq, lvel], [hfreq, hvel]]
elif unit == 'um':
lfreq, ldisp = lfreq, lacc / (2.0 * np.pi * lfreq)**2
hfreq, hdisp = hfreq, hacc / (2.0 * np.pi * hfreq)**2
return [[lfreq, ldisp], [hfreq, hdisp]]
elif unit == 'm':
lfreq, ldisp = lfreq, lacc / (2.0 * np.pi * lfreq)**2 * 1e-6
hfreq, hdisp = hfreq, hacc / (2.0 * np.pi * hfreq)**2 * 1e-6
return [[lfreq, ldisp], [hfreq, hdisp]]
else:
raise ValueError(unit)
def get_spectrum(model):
fnams = external_models()
if fnams[model]:
if model == 'NHNM':
p, power = get_nhnm()
f_in = 1. / p
power_in = 10**(power / 10)
elif model == 'NLNM':
p, power = get_nlnm()
f_in = 1. / p
power_in = 10**(power / 10)
else:
spec = np.loadtxt(fnams[model])
f_in = spec[:, 0]
power_in = spec[:, 1]**2
return f_in, power_in
def below_noise_model(station, data, inv, save_plot=False):
tr = df_to_trace(station, data)
ppsd = PPSD(tr.stats, metadata=inv)
ppsd.add(tr)
fig = ppsd.plot(show=False)
if save_plot:
julday = format_date_to_str(tr.stats.starttime.julday, 3)
fig.savefig(
f"plot_data/psd/{station}/{tr.stats.starttime.year}.{julday}.png",
dpi=300)
nlnm_t, nlnm_db = get_nlnm()
trace_t = ppsd.period_bin_centers.tolist()
interp_func = interpolate.interp1d(nlnm_t, nlnm_db, bounds_error=False)
interp_db = interp_func(trace_t)
traces_db = ppsd.psd_values
min_t = closest_index_of_list(trace_t, 2.5)
max_t = closest_index_of_list(trace_t, 10)
for t, trace_db in enumerate(traces_db):
diff = np.substract(trace_db[min_t:max_t + 1], interp_db[min_t,
max_t + 1])
for i, element in enumerate(diff):
if element < 0:
time_processed = ppsd.times_processed[t]
year = format_date_to_str(time_processed.year, 4)
month = format_date_to_str(time_processed.month, 2)
day = format_date_to_str(time_processed.day, 2)
hour = format_date_to_str(time_processed.hour, 2)
minute = format_date_to_str(time_processed.minute, 2)
second = format_date_to_str(time_processed.second, 2)
datetime = f'D{year}{month}{day}T{hour}{minute}{second}'
_id = station + '.' + datetime + '.1'
return datetime, f'{str(element)}dB', _id, 1, 'Below Low Noise Model', station
return None, f'OK. BelowLowNoiseModel of {station}', None, 0, None, None
def peterson_noise_model(unit='um/sec'):
'''
Return
'''
lt, ldb = get_nlnm()
ht, hdb = get_nhnm()
lfreq, lacc = 1. / lt, 10**(ldb / 20) * 1e6
hfreq, hacc = 1. / ht, 10**(hdb / 20) * 1e6
if unit == 'um/sec':
lfreq, lvel = lfreq, lacc / (2.0 * np.pi * lfreq)
hfreq, hvel = hfreq, hacc / (2.0 * np.pi * hfreq)
return [[lfreq, lvel], [hfreq, hvel]]
elif unit == 'um':
lfreq, ldisp = lfreq, lacc / (2.0 * np.pi * lfreq)**2
hfreq, hdisp = hfreq, hacc / (2.0 * np.pi * hfreq)**2
return [[lfreq, ldisp], [hfreq, hdisp]]
else:
raise ValueError(unit)
def prime_plot():
"""set up plot objects
"""
f = plt.figure(figsize=(9,5),dpi=200)
ax = f.add_subplot(111)
pretty_grids(ax)
# plot lines for noise models and microseisms
nlnm_x,nlnm_y = get_nlnm()
nhnm_x,nhnm_y = get_nhnm()
plt.plot(nhnm_x,nhnm_y,'gray',alpha=0.1,linewidth=1)
plt.plot(nlnm_x,nlnm_y,'gray',alpha=0.1,linewidth=1)
ax.fill_between(nhnm_x,nlnm_y,nhnm_y,facecolor='gray',alpha=0.1)
# set common plotting parameters
plt.xlim([0.2,100])
plt.ylim([nlnm_y.min(),-90])
plt.xscale("log")
plt.xlabel("Period [s]")
plt.ylabel("Amplitude [m^2/s^4/Hz][dB]")
return f, ax
def plot_ppsd(fmatch):
files = glob.glob(fmatch)
print(files)
plt.figure()
title = ''
for file in files:
fv = file.split('/')
date = fv[1] + '-' + fv[2] + ' '
j, t = fv[-1].split('_')
ch = t.split('.npz')
d = np.load(file)
f = d['arr_0'][0]
a = d['arr_0'][1]
plt.semilogx(f, a, label=date + ch[0])
f, a = get_nlnm()
plt.semilogx(f, a, '-k', label='NLNM')
f, a = get_nhnm()
plt.semilogx(f, a, '-k', label='NHNM')
plt.xlabel('Period (s)')
plt.ylabel('Amplitude (dB)')
plt.legend()
plt.show()
tr.stats.channel,
'date':
stime,
'units':
'ACC'
}
#tr.detrend('constant')
#tr.simulate(paz_remove=None, seedresp=seedresp)
#tr.filter('bandpass',freqmin=1., freqmax =5.)
#tr.taper(0.05)
lenfft = 2 * 512
#fig = plt.figure(1, figsize=(12,8))
plt.subplot(3, 1, 3)
per, NLNM = get_nlnm()
per, NHNM = get_nhnm()
for tr in st:
power, freq = csd(tr.data,
tr.data,
NFFT=lenfft,
noverlap=int(lenfft * .5),
Fs=1. / tr.stats.delta,
scale_by_freq=True)
power = np.abs(power[1:])
freq = freq[1:]
resp = evalresp(t_samp=tr.stats.delta,
nfft=lenfft,
filename='/APPS/metadata/RESPS/RESP.' + tr.stats.network +
'.' + tr.stats.station + '.' + tr.stats.location + '.' +
tr.stats.channel,
label='PSD ' + (tr.id).replace('.', ' '),
alpha=.7)
plt.semilogx(1. / fre1,
n[str(idx)],
linestyle=':',
linewidth=3,
label='Self-Noise ' + (tr.id).replace('.', ' '),
alpha=.7)
nm /= np.abs(resp[1:])**2
nm = np.abs(nm)
#N= 5
#nm = np.convolve(nm, np.ones((N,))/N, mode='same')
#nm2 = konno_ohmachi_smoothing(nm, fre1)
#plt.semilogx(1./fre1, 10.*np.log10(nm), label='Self-Noise Mean')
per_nlnm, pow_nlnm = get_nlnm()
plt.semilogx(per_nlnm, pow_nlnm, linewidth=2, color='k')
per_nhnm, pow_nhnm = get_nhnm()
plt.semilogx(per_nhnm, pow_nhnm, linewidth=2, color='k', label='NLNM/NHNM')
#plt.semilogx(1./fre1, 10.*np.log10(nm2), label='Self-Noise Mean')
plt.xlabel('Period (s)')
plt.ylabel('Power (dB rel. 1 $(m/s^2)^2/Hz$)')
#plt.title('Start Time: ' + str(stgood[0].stats.starttime.format_seed()))
plt.legend(loc=9, ncol=4)
plt.ylim((-225, -30))
plt.xlim((2., 500000))
plt.text(0.5, -30., '(a)', fontsize=28)
#plt.savefig('SELFNOISE_TUC.jpg',format='JPEG', dpi= 400)
#plt.show()
plt.subplot(2, 1, 2)
power = power[1:]
power = np.absolute(power)
resppath += tr.id
resp = evalresp(t_samp=tr.stats.delta,
nfft=nfft,
filename=resppath,
date=tr.stats.starttime,
station=tr.stats.station,
channel=tr.stats.channel,
locid=tr.stats.location,
network=tr.stats.network,
units='ACC')
resp = resp[1:]
powerR = 10. * np.log10(power / np.abs(resp)**2)
pernlnm, nlnm = get_nlnm()
pernhnm, nhnm = get_nhnm()
# Plotting data on either the low or high wind subplot
if idx2 == 0:
plt.subplot(211)
plt.semilogx(1. / freq,
powerR,
label=tr.id,
color=colors[idx],
linewidth=0.7)
else:
plt.subplot(212)
plt.semilogx(1. / freq,
powerR,
label=tr.id,
for idx, tr in enumerate(st):
amp, f = tr.stats.response.get_evalresp_response(tr.stats.delta,
2**24,
output='VEL')
amp = amp[1:]
f = f[1:]
if idx == 0:
label = 'Trillium Compact'
else:
label = 'EpiSensor'
plt.semilogx(f, 20. * np.log10(np.abs(amp)), linewidth=2, label=label)
plt.legend(loc=8)
plt.xlabel('Frequency (Hz)')
plt.ylabel('Amplitude (dB rel. 1 $(m/s)^2$)')
plt.xlim((1. / (24 * 60 * 60), 200.))
per, nlnm = get_nlnm()
per, nhnm = get_nhnm()
nlnm = np.sqrt(10**(nlnm / 10.) * (2.**0.25 - 2.**(-0.25)) / per)
nlnm = 20. * np.log10(nlnm)
nhnm = np.sqrt(10**(nhnm / 10.) * (2.**0.25 - 2.**(-0.25)) / per)
nhnm = 20. * np.log10(nhnm)
plt.text(1. / (280 * 60 * 60), 180, '(a)', fontsize=26)
plt.subplot(2, 1, 2)
plt.semilogx(1. / per, nlnm, color='k', linewidth=2)
plt.semilogx(1. / per, nhnm, color='k', linewidth=2, label='NLNM/NHNM')
plt.xlabel('Frequency (Hz)')
plt.ylabel('Amplitude 1/2-Octave (dB rel. 1 $(m/s^2)^2$ )')
plt.xlim((1. / (24 * 60 * 60), 200.))
NFFT = 4096
for idx, tr in enumerate(st):
if idx == 0:
for mode in modetypes:
with open('modes_' + mode + '.eigen', 'r') as f:
next(f)
modes[mode] = []
for line in f:
line = ' '.join(line.split())
if int(line.split(' ')[0]) == 0:
line = line.split(' ')[4]
modes[mode].append(1. / float(line))
#print(modes['T'])
print('Here are the number of spectra:' + str(len(specsN[chan][1, :])))
if True:
pers, nlnm = get_nlnm()
fig = plt.figure(1, figsize=(14, 9))
plt.subplots_adjust(hspace=0.001)
for idx, chan in enumerate(chans):
ax1 = fig.add_subplot(len(chans), 1, idx + 1)
for pidx in range(len(specsN[chan][1, :])):
ax1.semilogx(freq, specsN[chan][:, pidx], color='C0', alpha=.01)
#if chan == 'LHZ':
percent = 10.
minsp = np.percentile(specsN[chan][:, :], percent, axis=1)
#minsp = np.average(specsN[chan][:,:], axis=1)
#for idx2, mode in enumerate(modes['S']):
#mode *= 1000.
#if idx2 == 0:
def plot_statistics(self, axis, ppsd):
if self.checkBox.isChecked():
mean = ppsd.get_mean()
axis.plot(mean[0],
mean[1],
color='black',
linewidth=1,
linestyle='--',
label="Mean")
if self.checkBox_2.isChecked():
mode = ppsd.get_mode()
axis.plot(mode[0],
mode[1],
color='green',
linewidth=1,
linestyle='--',
label="Mode")
if self.checkBox_3.isChecked():
nhnm = osse.get_nhnm()
axis.plot(nhnm[0],
nhnm[1],
color='gray',
linewidth=2,
linestyle='-',
label="NHNM (Peterson et al., 2003)")
if self.checkBox_4.isChecked():
nlnm = osse.get_nlnm()
axis.plot(nlnm[0],
nlnm[1],
color='gray',
linewidth=2,
linestyle='-',
label="NLNM (Peterson et al., 2003)")
if self.groupBox_2.isChecked():
min_mag, max_mag, min_dist, max_dist = (
self.doubleSpinBox.value(), self.doubleSpinBox_2.value(),
self.doubleSpinBox_3.value(), self.doubleSpinBox_4.value())
for key, data in earthquake_models.items():
magnitude, distance = key
frequencies, accelerations = data
accelerations = np.array(accelerations)
frequencies = np.array(frequencies)
periods = 1.0 / frequencies
# Eq.1 from Clinton and Cauzzi (2013) converts
# power to density
ydata = accelerations / (periods**(-.5))
ydata = 20 * np.log10(ydata / 2)
if not (min_mag <= magnitude <= max_mag
and min_dist <= distance <= max_dist
and min(ydata) < ppsd.db_bin_edges[-1]):
continue
xdata = periods
axis.plot(xdata, ydata, linewidth=2, color="black")
leftpoint = np.argsort(xdata)[0]
if not ydata[leftpoint] < ppsd.db_bin_edges[-1]:
continue
axis.text(
xdata[leftpoint],
ydata[leftpoint],
'M%.1f\n%dkm' % (magnitude, distance),
ha='right',
va='top',
color='w',
weight='bold',
fontsize='x-small',
path_effects=[withStroke(linewidth=3, foreground='0.4')])
'gain':
60077000.0,
'poles': [
-0.037004 + 0.037016j, -0.037004 - 0.037016j, -251.33 + 0j,
-131.04 - 467.29j, -131.04 + 467.29j
],
'sensitivity':
2516778400.0,
'zeros': [0j, 0j]
}
ppsd = PPSD(tr.stats, paz)
print(ppsd.id)
print(ppsd.times_processed)
ppsd.add(st)
print(ppsd.times_processed)
ppsd.plot()
ppsd.save_npz("myfile.npz")
ppsd = PPSD.load_npz("myfile.npz")
#%% Try getting the NHNM and NLNM
nhnm = spec.get_nhnm()
plt.semilogx(nhnm[0], nhnm[1])
nlnm = spec.get_nlnm()
plt.semilogx(nlnm[0], nlnm[1])
from gwpy.spectrogram import Spectrogram
from miyopy.utils.trillium import Trillium
from obspy.signal.spectral_estimation import get_nhnm, get_nlnm
from gwpy.types.array2d import Array2D
from gwpy.timeseries import TimeSeries
import astropy.units as u
amp = 10**(30.0/20.0)
c2v = 20.0/2**15
tr120 = Trillium('120QA')
v2vel = tr120.v2vel
lt, ldb = get_nlnm()
ht, hdb = get_nhnm()
lfreq, lacc = 1./lt, 10**(ldb/20)*1e6
hfreq, hacc = 1./ht, 10**(hdb/20)*1e6
lfreq, lvel = lfreq, lacc/(2.0*np.pi*lfreq)
hfreq, hvel = hfreq, hacc/(2.0*np.pi*hfreq)
lfreq, ldisp = lfreq, lvel/(2.0*np.pi*lfreq)
hfreq, hdisp = hfreq, hvel/(2.0*np.pi*hfreq)
def _plot_band_histgram(blrms,blrms2,blrms3,scale=0.9,loc=0):
blrms.override_unit('m/s')
blrms = blrms/amp*c2v/1000*1e6
blrms2 = blrms2/amp*c2v/1000*1e6
blrms3 = blrms3/amp*c2v/1000*1e6
#
def make_dataset(flights,
carrier_list,
range_start,
range_end,
bin_width,
output='Latencies',
plottype='Cum'):
data = {
'proportion': [],
'center': [],
'name': [],
'fullname': [],
'color': []
}
names = []
#range_extent = int((range_end - range_start) / bin_width)
range_extent = np.logspace(np.log10(max([0.01, range_start])),
np.log10(range_end),
bin_width,
endpoint=True)
if range_start < -0.009:
range_extent = np.append(
np.sort(-1 * np.logspace(
np.log10(0.009), # 0.01 creates a point at 0, do not do that
np.log10(range_start * -1),
bin_width,
endpoint=True)),
range_extent)
if output == 'PSD':
names += ['N(H,L)NM']
data['fullname'] += ['NLNM']
data['fullname'] += ['NHNM']
for d in [get_nlnm(), get_nhnm()]:
data['proportion'] += [
d[1][(d[0] >= range_start) & (d[0] <= range_end)]
]
data['center'] += [
d[0][(d[0] >= range_start) & (d[0] <= range_end)]
]
data['name'] += ['N(H,L)M']
data['color'] += ['black']
for i, carrier_name in enumerate(carrier_list):
subset = flights[1][flights[1]['name'] == carrier_name]
d = []
for i, row in subset.iterrows():
psd = row['PSD'][(row['PSD_periods'] >= range_start)
& (row['PSD_periods'] <= range_end)]
psd_periods = row['PSD_periods'][
(row['PSD_periods'] >= range_start)
& (row['PSD_periods'] <= range_end)]
d += [list(psd)]
if len(d):
data['proportion'] += [np.percentile(d, 83, axis=0)]
data['center'] += [psd_periods]
# Assign the carrier for labels
data['fullname'] += [carrier_name]
seedid = carrier_name.split('.')
seedid[1] = '*'
seedid[2] = '*'
data['name'] += ['.'.join(seedid)]
# Color each carrier differently
if data['name'][-1] not in names:
names += [data['name'][-1]]
data['color'] += [Category20_16[names.index(data['name'][-1])]]
return ColumnDataSource(data=data)
data = {
'proportion': [],
'steproportion': [],
'left': [],
'right': [],
'center': [],
'leftright': [],
'f_interval': [],
'step_interval': [],
'f_proportion': [],
'step_proportion': [],
'name': [],
'fullname': [],
'color': []
}
# Iterate through all the carriers
for i, carrier_name in enumerate(carrier_list):
# Subset to the carrier
subset = flights[0][flights[0]['name'] == carrier_name]
subset = subset[output]
subset = subset[subset >= range_start]
subset = subset[subset <= range_end]
# Create a histogram with 5 minute bins
arr_hist, edges = np.histogram(subset,
bins=range_extent,
range=[range_start, range_end])
# Divide the counts by the total to get a proportion
if not np.nansum(arr_hist) > 0:
continue
data['proportion'] += [
arr_hist / np.nansum(arr_hist) * np.sign(edges[:-1])
]
data['left'] += [edges[:-1]]
data['right'] += [edges[1:]]
data['center'] += [np.abs((edges[:-1] + edges[1:]) / 2)]
if 'Cum' in plottype:
data['proportion'][-1] = np.nancumsum(data['proportion'][-1])
# Format the proportion
data['f_proportion'] += [[
'%0.5f' % proportion for proportion in data['proportion'][-1]
]]
# Format the interval
data['f_interval'] += [[
'%.3f to %.3f sec' % (left, right)
for left, right in zip(data['left'][-1], data['right'][-1])
]]
# Step data
data['steproportion'] += [
list(
itertools.chain.from_iterable(
zip(data['proportion'][-1], data['proportion'][-1])))
]
data['leftright'] += [
list(
itertools.chain.from_iterable(
zip(data['left'][-1], data['right'][-1])))
]
data['step_proportion'] += [
list(
itertools.chain.from_iterable(
zip(data['f_proportion'][-1], data['f_proportion'][-1])))
]
data['step_interval'] += [
list(
itertools.chain.from_iterable(
zip(data['f_interval'][-1], data['f_interval'][-1])))
]
# Assign the carrier for labels
data['fullname'] += [carrier_name]
seedid = carrier_name.split('.')
seedid[1] = '*'
seedid[2] = '*'
data['name'] += ['.'.join(seedid)]
# Color each carrier differently
if data['name'][-1] not in names:
names += [data['name'][-1]]
data['color'] += [Category20_16[names.index(data['name'][-1])]]
# Overall dataframe
#by_carrier = by_carrier.sort_values(['name', 'left'])
return ColumnDataSource(data=data)
skip_on_gaps=True, period_limits=(0.02, 100.0),
db_bins=(-200, -50, 1.))
ppsdMHc.add(stMHc_sel)
(cMHpd, cMHpsd) = ppsdMHc.get_mode()
stEHc = read(cEHdata)
invEHc = read_inventory(cEHmeta)
stEHc_sel = stEHc.select(channel='EHW')
trc = stEHc_sel[0]
ppsdEHc = PPSD(trc.stats, metadata=invEHc, ppsd_length=200.0,
skip_on_gaps=True, period_limits=(0.02, 100.0),
db_bins=(-200, -50, 1.))
ppsdEHc.add(stEHc_sel)
(cEHpd, cEHpsd) = ppsdEHc.get_mode()
# For reference, earth low and high noise models
(nlnmpd, nlnmpsd) = get_nlnm()
(nhnmpd, nhnmpsd) = get_nhnm()
# channels = ['EHU', 'EHV', 'EHW']
# channels = ['EHU']
# channels = ['SHU', 'MHV', 'MHW']
st = read(ondeckdatafile)
inv = read_inventory(ondeckmetadata)
# On deck SP data
print("Working on on-deck data")
chn = 'EHU'
tr = st.select(channel=chn)[1] #first one may have metadata problem
ppsd = PPSD(tr.stats, metadata=inv, ppsd_length=600.0, skip_on_gaps=True,
period_limits=(0.02, 100.0), db_bins=(-200,-50, 1.))
def plot(self, cmap, filename=None,
starttime=T1, endtime=T2,
show_percentiles=False, percentiles=[10, 50, 90],
show_class_models=True, grid=True, title_comment=False):
"""
Plot the QC resume figure
If a filename is specified the plot is saved to this file, otherwise
a plot window is shown.
:type filename: str (optional)
:param filename: Name of output file
:type show_percentiles: bool (optional)
:param show_percentiles: Enable/disable plotting of approximated
percentiles. These are calculated from the binned histogram and
are not the exact percentiles.
:type percentiles: list of ints
:param percentiles: percentiles to show if plotting of percentiles is
selected.
:type show_class_models: bool (optional)
:param show_class_models: Enable/disable plotting of class models.
:type grid: bool (optional)
:param grid: Enable/disable grid in histogram plot.
:type cmap: cmap
:param cmap: Colormap for PPSD.
"""
# COMMON PARAMETERS
psd_db_limits = (-180, -110)
psdh_db_limits = (-200, -90)
f_limits = (5e-3, 20)
per_left = (10, 1, .1)
per_right = (100, 10, 1)
# -----------------
# Select Time window
# -----------
times_used = array(self.times_used)
starttime = max(min(times_used), starttime)
endtime = min(max(times_used), endtime)
bool_times_select = (times_used > starttime) & (times_used < endtime)
times_used = times_used[bool_times_select]
psd = self.psd[bool_times_select, :]
spikes = self.spikes[bool_times_select]
hist_stack = self._QC__get_ppsd(time_lim=(starttime, endtime))
Hour = arange(0, 23, 1)
HourUsed = array([t.hour for t in times_used])
Day_span = (endtime - starttime) / 86400.
# -----------
# FIGURE and AXES
fig = plt.figure(figsize=(9.62, 13.60), facecolor='w', edgecolor='k')
ax_ppsd = fig.add_axes([0.1, 0.68, 0.9, 0.28])
ax_coverage = fig.add_axes([0.1, 0.56, 0.64, 0.04])
ax_spectrogram = fig.add_axes([0.1, 0.31, 0.64, 0.24])
ax_spectrogramhour = fig.add_axes([0.76, 0.31, 0.20, 0.24])
ax_freqpsd = fig.add_axes([0.1, 0.18, 0.64, 0.12])
ax_freqpsdhour = fig.add_axes([0.76, 0.18, 0.20, 0.12])
ax_spikes = fig.add_axes([0.1, 0.05, 0.64, 0.12])
ax_spikeshour = fig.add_axes([0.76, 0.05, 0.20, 0.12])
ax_col_spectrogram = fig.add_axes([0.76, 0.588, 0.20, 0.014])
ax_col_spectrogramhour = fig.add_axes([0.76, 0.57, 0.20, 0.014])
########################### COVERAGE
ax_coverage.xaxis_date()
ax_coverage.set_yticks([])
# plot data coverage
starts = date2num([a.datetime for a in times_used])
ends = date2num([a.datetime for a in times_used + PPSD_LENGTH])
for start, end in zip(starts, ends):
ax_coverage.axvspan(start, end, 0, 0.7, alpha=0.5, lw=0)
# plot data really available
aa = [(start, end) for start, end in self.times_data if (
(end - start) > PPSD_LENGTH)] # avoid very small gaps otherwise very long to plot
for start, end in aa:
start = date2num(start.datetime)
end = date2num(end.datetime)
ax_coverage.axvspan(start, end, 0.7, 1, facecolor="g", lw=0)
# plot gaps
aa = [(start, end) for start, end in self.times_gaps if (
(end - start) > PPSD_LENGTH)] # avoid very small gaps otherwise very long to plot
for start, end in aa:
start = date2num(start.datetime)
end = date2num(end.datetime)
ax_coverage.axvspan(start, end, 0.7, 1, facecolor="r", lw=0)
# Compute uncovered periods
starts_uncov = ends[:-1]
ends_uncov = starts[1:]
# Keep only major uncovered periods
ga = (ends_uncov - starts_uncov) > (PPSD_LENGTH) / 86400
starts_uncov = starts_uncov[ga]
ends_uncov = ends_uncov[ga]
ax_coverage.set_xlim(starttime.datetime, endtime.datetime)
# labels
ax_coverage.xaxis.set_ticks_position('top')
ax_coverage.tick_params(direction='out')
ax_coverage.xaxis.set_major_locator(mdates.AutoDateLocator())
if Day_span > 5:
ax_coverage.xaxis.set_major_formatter(DateFormatter('%D'))
else:
ax_coverage.xaxis.set_major_formatter(DateFormatter('%D-%Hh'))
for label in ax_coverage.get_xticklabels():
label.set_fontsize(10)
for label in ax_coverage.get_xticklabels():
label.set_ha("right")
label.set_rotation(-25)
########################### SPECTROGRAM
ax_spectrogram.xaxis_date()
t = date2num([a.datetime for a in times_used])
f = 1. / self.per_octaves
T, F = np.meshgrid(t, f)
spectro = ax_spectrogram.pcolormesh(
T, F, transpose(psd), cmap=spectro_cmap)
spectro.set_clim(*psd_db_limits)
spectrogram_colorbar = colorbar(spectro, cax=ax_col_spectrogram,
orientation='horizontal',
ticks=linspace(psd_db_limits[0],
psd_db_limits[1], 5),
format='%i')
spectrogram_colorbar.set_label("dB")
spectrogram_colorbar.set_clim(*psd_db_limits)
spectrogram_colorbar.ax.xaxis.set_ticks_position('top')
spectrogram_colorbar.ax.xaxis.label.set_position((1.1, .2))
spectrogram_colorbar.ax.yaxis.label.set_horizontalalignment('left')
spectrogram_colorbar.ax.yaxis.label.set_verticalalignment('bottom')
ax_spectrogram.grid(which="major")
ax_spectrogram.semilogy()
ax_spectrogram.set_ylim(f_limits)
ax_spectrogram.set_xlim(starttime.datetime, endtime.datetime)
ax_spectrogram.set_xticks(ax_coverage.get_xticks())
setp(ax_spectrogram.get_xticklabels(), visible=False)
ax_spectrogram.yaxis.set_major_formatter(FormatStrFormatter("%.2f"))
ax_spectrogram.set_ylabel('Frequency [Hz]')
ax_spectrogram.yaxis.set_label_coords(-0.08, 0.5)
########################### SPECTROGRAM PER HOUR
#psdH=array([array(psd[HourUsed==h,:]).mean(axis=0) for h in Hour])
psdH = zeros((size(Hour), size(self.per_octaves)))
for i, h in enumerate(Hour):
a = array(psd[HourUsed == h, :])
A = ma.masked_array(
a, mask=~((a > psdh_db_limits[0]) & (a < psdh_db_limits[1])))
psdH[i, :] = ma.getdata(A.mean(axis=0))
psdH = array([psdH[:, i] - psdH[:, i].mean()
for i in arange(0, psdH.shape[1])])
H24, F = np.meshgrid(Hour, f)
spectroh = ax_spectrogramhour.pcolormesh(H24, F, psdH, cmap=cm.RdBu_r)
spectroh.set_clim(-8, 8)
spectrogram_per_hour_colorbar = colorbar(spectroh,
cax=ax_col_spectrogramhour,
orientation='horizontal',
ticks=linspace(-8, 8, 5),
format='%i')
spectrogram_per_hour_colorbar.set_clim(-8, 8)
ax_spectrogramhour.semilogy()
ax_spectrogramhour.set_xlim((0, 23))
ax_spectrogramhour.set_ylim(f_limits)
ax_spectrogramhour.set_xticks(arange(0, 23, 4))
ax_spectrogramhour.set_xticklabels(arange(0, 23, 4), visible=False)
ax_spectrogramhour.yaxis.set_ticks_position('right')
ax_spectrogramhour.yaxis.set_label_position('right')
ax_spectrogramhour.yaxis.grid(True)
ax_spectrogramhour.xaxis.grid(False)
########################### PSD BY PERIOD RANGE
t = date2num([a.datetime for a in times_used])
ax_freqpsd.xaxis_date()
for pp in zip(per_left, per_right):
mpsd = self._QC__get_psd(time_lim=(starttime, endtime), per_lim=pp)
mpsdH = zeros(size(Hour)) + NaN
for i, h in enumerate(Hour):
a = array(mpsd[HourUsed == h])
A = ma.masked_array(
a, mask=~((a > psdh_db_limits[0]) & (a < psdh_db_limits[1])))
mpsdH[i] = ma.getdata(A.mean())
ax_freqpsd.plot(t, mpsd)
ax_freqpsdhour.plot(Hour, mpsdH - mpsdH.mean())
ax_freqpsd.set_ylim(psd_db_limits)
ax_freqpsd.set_xlim(starttime.datetime, endtime.datetime)
ax_freqpsd.set_xticks(ax_coverage.get_xticks())
setp(ax_freqpsd.get_xticklabels(), visible=False)
ax_freqpsd.set_ylabel('Amplitude [dB]')
ax_freqpsd.yaxis.set_label_coords(-0.08, 0.5)
ax_freqpsd.yaxis.grid(False)
ax_freqpsd.xaxis.grid(True)
########################### PSD BY PERIOD RANGE PER HOUR
ax_freqpsdhour.set_xlim((0, 23))
ax_freqpsdhour.set_ylim((-8, 8))
ax_freqpsdhour.set_yticks(arange(-6, 7, 2))
ax_freqpsdhour.set_xticks(arange(0, 23, 4))
ax_freqpsdhour.set_xticklabels(arange(0, 23, 4), visible=False)
ax_freqpsdhour.yaxis.set_ticks_position('right')
ax_freqpsdhour.yaxis.set_label_position('right')
########################### SPIKES
ax_spikes.xaxis_date()
ax_spikes.bar(t, spikes, width=1. / 24)
ax_spikes.set_ylim((0, 50))
ax_spikes.set_xlim(starttime.datetime, endtime.datetime)
ax_spikes.set_yticks(arange(10, 45, 10))
ax_spikes.set_xticks(ax_coverage.get_xticks())
#setp(ax_spikes.get_xticklabels(), visible=False)
ax_spikes.set_ylabel("Detections [#/hour]")
ax_spikes.yaxis.set_label_coords(-0.08, 0.5)
ax_spikes.yaxis.grid(False)
ax_spikes.xaxis.grid(True)
# labels
ax_spikes.xaxis.set_ticks_position('bottom')
ax_spikes.tick_params(direction='out')
ax_spikes.xaxis.set_major_locator(mdates.AutoDateLocator())
if Day_span > 5:
ax_spikes.xaxis.set_major_formatter(DateFormatter('%D'))
else:
ax_spikes.xaxis.set_major_formatter(DateFormatter('%D-%Hh'))
for label in ax_spikes.get_xticklabels():
label.set_fontsize(10)
for label in ax_spikes.get_xticklabels():
label.set_ha("right")
label.set_rotation(25)
########################### SPIKES PER HOUR
mspikesH = array([array(spikes[[HourUsed == h]]).mean() for h in Hour])
ax_spikeshour.bar(Hour, mspikesH - mspikesH.mean(), width=1.)
ax_spikeshour.set_xlim((0, 23))
ax_spikeshour.set_ylim((-8, 8))
ax_spikeshour.set_xticks(arange(0, 23, 4))
ax_spikeshour.set_yticks(arange(-6, 7, 2))
ax_spikeshour.set_ylabel("Daily variation")
ax_spikeshour.set_xlabel("Hour [UTC]")
ax_spikeshour.yaxis.set_ticks_position('right')
ax_spikeshour.yaxis.set_label_position('right')
ax_spikeshour.yaxis.set_label_coords(1.3, 1)
########################### plot gaps
for start, end in zip(starts_uncov, ends_uncov):
ax_spectrogram.axvspan(
start, end, 0, 1, facecolor="w", lw=0, zorder=100)
ax_freqpsd.axvspan(
start, end, 0, 1, facecolor="w", lw=0, zorder=100)
ax_spikes.axvspan(start, end, 0, 1,
facecolor="w", lw=0, zorder=100)
# LEGEND
leg = [str(xx) + '-' + str(yy) + ' s' for xx,
yy in zip(per_left, per_right)]
hleg = ax_freqpsd.legend(
leg, loc=3, bbox_to_anchor=(-0.015, 0.75), ncol=size(leg))
for txt in hleg.get_texts():
txt.set_fontsize(8)
# PPSD
X, Y = np.meshgrid(self.xedges, self.yedges)
ppsd = ax_ppsd.pcolormesh(X, Y, hist_stack.T, cmap=cmap)
ppsd_colorbar = plt.colorbar(ppsd, ax=ax_ppsd)
ppsd_colorbar.set_label("PPSD [%]")
color_limits = (0, 30)
ppsd.set_clim(*color_limits)
ppsd_colorbar.set_clim(*color_limits)
ax_ppsd.grid(b=grid, which="major")
if show_percentiles:
hist_cum = self.__get_normalized_cumulative_histogram(
time_lim=(starttime, endtime))
# for every period look up the approximate place of the percentiles
for percentile in percentiles:
periods, percentile_values = self.get_percentile(
percentile=percentile, hist_cum=hist_cum, time_lim=(starttime, endtime))
ax_ppsd.plot(periods, percentile_values, color="black")
# Noise models
model_periods, high_noise = get_nhnm()
ax_ppsd.plot(model_periods, high_noise, '0.4', linewidth=2)
model_periods, low_noise = get_nlnm()
ax_ppsd.plot(model_periods, low_noise, '0.4', linewidth=2)
if show_class_models:
classA_periods, classA_noise, classB_periods, classB_noise = get_class()
ax_ppsd.plot(classA_periods, classA_noise, 'r--', linewidth=3)
ax_ppsd.plot(classB_periods, classB_noise, 'g--', linewidth=3)
ax_ppsd.semilogx()
ax_ppsd.set_xlim(1. / f_limits[1], 1. / f_limits[0])
ax_ppsd.set_ylim((-200, -80))
ax_ppsd.set_xlabel('Period [s]')
ax_ppsd.get_xaxis().set_label_coords(0.5, -0.05)
ax_ppsd.set_ylabel('Amplitude [dB]')
ax_ppsd.xaxis.set_major_formatter(FormatStrFormatter("%.2f"))
# TITLE
title = "%s %s -- %s (%i segments)"
title = title % (self.id, starttime.date, endtime.date,
len(times_used))
if title_comment:
fig.text(0.82, 0.978, title_comment, bbox=dict(
facecolor='red', alpha=0.5), fontsize=15)
ax_ppsd.set_title(title)
# a=str(UTCDateTime().format_iris_web_service())
plt.draw()
if filename is not None:
plt.savefig(filename)
plt.close()
else:
plt.show()
day_ref_mean_pd.append(meanpd)
day_ref_mean_psd.append(meanpsd)
night_ppsd_ref = PPSD(night_ref_comp_sts[0][0].stats,
TrillC,
ppsd_length=600.0)
for st in night_ref_comp_sts:
night_ppsd_ref.add(st)
# plotfile = 'night_ref_ppsd_' + component + '.png'
# night_ppsd_ref.plot(plotfile, show_coverage=False)
(meanpd, meanpsd) = night_ppsd_ref.get_mean()
night_ref_mean_pd.append(meanpd)
night_ref_mean_psd.append(meanpsd)
# Plot up Earth noise models and mean psd values
nlnm_pd, nlnm = get_nlnm()
nhnm_pd, nhnm = get_nhnm()
fig = plt.figure(figsize=(6, 9))
# First the vertical component
ax = plt.subplot2grid((2, 8), (0, 1), colspan=7)
ax.semilogx(nhnm_pd, nhnm, linewidth=2, color='darkgrey', label='Earth noise')
ax.semilogx(nlnm_pd, nlnm, linewidth=2, color='darkgrey')
ax.semilogx(day_ref_mean_pd[0], day_ref_mean_psd[0], color='red')
ax.semilogx(day_deck_mean_pd[0], day_deck_mean_psd[0], color='red', ls='--')
ax.semilogx(night_ref_mean_pd[0], night_ref_mean_psd[0], color='green')
ax.semilogx(night_deck_mean_pd[0],
night_deck_mean_psd[0],
vpr = 1.45 * 1000. # At receiver vps = 6.8 * 1000. # At source vss = 3.9 * 1000. # At source # Quality Factor from Shearer L = (4. / 3.) * (vpr / vss)**2 Qinv = L * (1. / Qmu) + (1. - L) * (1. / Qk) Q = 1. / Qinv # Seismic Moment M0 = 10.**((Mw + 10.7) * (3. / 2.)) # N-m M0 = (M0 / (10**5)) * .01 perNLNM, NLNM = get_nlnm() perNHNM, NHNM = get_nhnm() # Make a vector of frequency sampling_rate = 1000. lenfft = 1000 freq = np.fft.rfftfreq(lenfft, d=1. / sampling_rate) freq = freq[1:] # Source radiation F = 1. # Page 149 of Nolet's book AE = F / (4. * np.pi * Rrs * (rhos * vpr * vps**5)**.5) # Add attenuation AE = AE * np.exp(-2. * np.pi * freq * Rrs / (Q * (vpr * vps)**.5))
print(
"Corner f %f" %
(np.pi * 2 *
corner_frequency(mw2moment(mw), stressdrop, alpha * 1.e3, phase='P')))
As = ass_snes(f,
mw,
alpha,
phase='P',
rho=rho,
stressdrop=stressdrop,
n=2,
gamma=2.)
Ae = attenuation(f, 600., delta, depth, alpha, phase='P')
plt.figure()
per1, nlnm = get_nlnm()
per2, nhnm = get_nhnm()
plt.semilogx(per1, nlnm, label='NLNM/NHNM', color='.7')
plt.semilogx(per2, nhnm, color='.7')
plt.semilogx(1. / f, 10 * np.log10((As**2) / f), label='SNES')
# plt.semilogx(1./f,10*np.log10((Ae**2)/f),label='Attenuate')
plt.semilogx(1. / f,
10 * np.log10(((As * Ae)**2) / f),
label="Mw %.1f @ %.1f,z=%.1fkm" % (mw, delta, depth))
plt.xlabel('Period (s)')
plt.ylabel('Acceleration (db)')
plt.legend()
# Check to see if we go backwards fine
f = np.array([4, 6, 8])
As = ass_snes(f,
(p13, fre1) = cp(st[0], st[2], length, overlap, delta)
(p23, fre1) = cp(st[1], st[2], length, overlap, delta)
n11 = ((2 * pi * fre1)**2) * (p11 - p21 * p13 / p23) / instresp
n22 = ((2 * pi * fre1)**2) * (
p22 - np.conjugate(p23) * p21 / np.conjugate(p13)) / instresp
n33 = ((2 * pi * fre1)**
2) * (p33 - p23 * np.conjugate(p13) / p21) / instresp
psd1 = 10 * np.log10(((2 * pi * fre1)**2) * p11 / instresp)
psd2 = 10 * np.log10(((2 * pi * fre1)**2) * p22 / instresp)
psd3 = 10 * np.log10(((2 * pi * fre1)**2) * p33 / instresp)
per = 1 / fre1
NLNMper, NLNMpower = get_nlnm()
NHNMper, NHNMpower = get_nhnm()
titlelegend = st[0].stats.channel + ' Self-Noise Start Time: ' + str(st[0].stats.starttime.year) + ' ' + str(st[0].stats.starttime.julday) + ' ' + \
str(st[0].stats.starttime.hour) + ':' + str(st[0].stats.starttime.minute) + ':' + str(st[0].stats.starttime.second) + \
' Duration: ' + str(int(st[0].stats.npts*delta/(60*60))) + ' Hours'
noiseplot = figure(1)
subplot(1, 1, 1)
title(titlelegend, fontsize=12)
plot(1/fre1,psd1,'r',label='PSD ' + st[0].stats.station + ' ' + \
st[0].stats.location, linewidth=1.5)
plot(1/fre1,psd2,'b',label='PSD ' + st[1].stats.station + ' ' + \
st[1].stats.location, linewidth=1.5)
plot(1/fre1,psd3,'g',label='PSD ' + st[2].stats.station + ' ' + \
st[2].stats.location, linewidth=1.5)
msg_lib.info('POWER: ' + str(len(power)) + '\n')
fig = plt.figure()
fig.subplots_adjust(hspace=.2)
fig.subplots_adjust(wspace=.2)
fig.set_facecolor('w')
ax311 = plt.subplot(111)
ax311.set_xscale('log')
plabel_x, plabel_y = shared.production_label_position
ax311.text(plabel_x, plabel_y, production_label, horizontalalignment='left', fontsize=5,
verticalalignment='top',
transform=ax311.transAxes)
if do_plot_nnm:
nlnm_x, nlnm_y = get_nlnm()
nhnm_x, nhnm_y = get_nhnm()
if xtype != 'period':
nlnm_x = 1.0 / nlnm_x
nhnm_x = 1.0 / nhnm_x
plt.plot(nlnm_x, nlnm_y, lw=1, ls=':', c='k', label='NLNM, NHNM')
plt.plot(nhnm_x, nhnm_y, lw=1, ls=':', c='k')
# Period for the x-axis.
if xtype == 'period':
if utils_lib.param(param, 'plotSpectra').plotSpectra:
plt.plot(period, power, utils_lib.param(param, 'colorSpectra').colorSpectra, label=csd_label)
if utils_lib.param(param, 'plotSmooth').plotSmooth:
plt.plot(smooth_x, smooth_psd, color=utils_lib.param(param, 'colorSmooth').colorSmooth,
label=smoothing_label)
