def setup(self):
#define design variables that are independent of flight condition or control states
dvlist = [['ac|propulsion|engine|rating', 'eng1_rating', 260.0, 'kW'],
['dv_prop1_diameter', 'prop1_diameter', 2.5, 'm'],
['dv_motor1_rating', 'motor1_rating', 240.0, 'kW'],
['dv_gen1_rating', 'gen1_rating', 250.0, 'kW'],
['dv_batt1_weight', 'batt1_weight', 2000, 'kg']]
self.add_subsystem('dvs',
DVLabel(dvlist),
promotes_inputs=["*"],
promotes_outputs=["*"])
nn = self.options['num_nodes']
#introduce model components
self.add_subsystem('motor1',
SimpleMotor(efficiency=0.97, num_nodes=nn),
promotes_inputs=["throttle"])
self.add_subsystem('hybrid_split',
PowerSplit(rule='fraction', num_nodes=nn))
self.add_subsystem('gen1',
SimpleGenerator(efficiency=0.97, num_nodes=nn))
self.add_subsystem('eng1',
SimpleTurboshaft(num_nodes=nn),
promotes_outputs=["fuel_flow"])
self.add_subsystem('batt1', SimpleBattery(num_nodes=nn))
self.add_subsystem('prop1',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond_*"],
promotes_outputs=["thrust"])
#connect design variables to model component inputs
self.connect('eng1_rating', 'eng1.shaft_power_rating')
self.connect('prop1_diameter', 'prop1.diameter')
self.connect('motor1_rating', 'motor1.elec_power_rating')
self.connect('motor1_rating', 'prop1.power_rating')
self.connect('gen1_rating', 'gen1.elec_power_rating')
self.connect('batt1_weight', 'batt1.battery_weight')
#connect components to each other
self.connect('motor1.shaft_power_out', 'prop1.shaft_power_in')
self.connect('eng1.shaft_power_out', 'gen1.shaft_power_in')
self.connect('motor1.elec_load', 'hybrid_split.power_in')
self.connect('hybrid_split.power_out_A', 'batt1.elec_load')
def setup(self):
nn = self.options['num_nodes']
# rename incoming design variables
dvlist = [['ac|propulsion|engine|rating', 'eng1_rating', 850, 'hp'],
[
'ac|propulsion|propeller|diameter', 'prop1_diameter',
2.3, 'm'
]]
self.add_subsystem('dvs',
DVLabel(dvlist),
promotes_inputs=["*"],
promotes_outputs=["*"])
# introduce model components
self.add_subsystem('eng1',
SimpleTurboshaft(num_nodes=nn,
weight_inc=0.14 / 1000,
weight_base=104),
promotes_inputs=["throttle"],
promotes_outputs=["fuel_flow"])
self.add_subsystem('prop1',
SimplePropeller(num_nodes=nn,
num_blades=4,
design_J=2.2,
design_cp=0.55),
promotes_inputs=["fltcond|*"],
promotes_outputs=["thrust"])
# connect design variables to model component inputs
self.connect('eng1_rating', 'eng1.shaft_power_rating')
self.connect('eng1_rating', 'prop1.power_rating')
self.connect('prop1_diameter', 'prop1.diameter')
# connect components to each other
self.connect('eng1.shaft_power_out', 'prop1.shaft_power_in')
def setup(self):
nn = self.options['num_nodes']
#define design variables that are independent of flight condition or control states
dvlist = [
['ac|propulsion|engine|rating', 'eng_rating', 260.0, 'kW'],
['ac|propulsion|propeller|diameter', 'prop_diameter', 2.5, 'm'],
['ac|propulsion|motor|rating', 'motor_rating', 240.0, 'kW'],
['ac|propulsion|generator|rating', 'gen_rating', 250.0, 'kW'],
['ac|weights|W_battery', 'batt_weight', 2000, 'kg'],
[
'ac|propulsion|thermal|hx|mdot_coolant', 'mdot_coolant',
0.1 * np.ones((nn, )), 'kg/s'
],
[
'ac|propulsion|thermal|hx|coolant_mass', 'coolant_mass', 10.,
'kg'
],
[
'ac|propulsion|thermal|hx|channel_width', 'channel_width', 1.,
'mm'
],
[
'ac|propulsion|thermal|hx|channel_height', 'channel_height',
20., 'mm'
],
[
'ac|propulsion|thermal|hx|channel_length', 'channel_length',
0.2, 'm'
],
['ac|propulsion|thermal|hx|n_parallel', 'n_parallel', 50, None],
# ['ac|propulsion|thermal|duct|area_nozzle','area_nozzle',58.*np.ones((nn,)),'inch**2'],
[
'ac|propulsion|battery|specific_energy', 'specific_energy',
300, 'W*h/kg'
]
]
self.add_subsystem('dvs',
DVLabel(dvlist),
promotes_inputs=["*"],
promotes_outputs=["*"])
#introduce model components
self.add_subsystem('motor1',
SimpleMotor(efficiency=0.97, num_nodes=nn),
promotes_inputs=['throttle'])
self.add_subsystem('prop1',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"])
self.connect('motor1.shaft_power_out', 'prop1.shaft_power_in')
#propulsion models expect a high-level 'throttle' parameter and a 'propulsor_active' flag to set individual throttles
failedengine = ElementMultiplyDivideComp()
failedengine.add_equation('motor2throttle',
input_names=['throttle', 'propulsor_active'],
vec_size=nn)
self.add_subsystem('failedmotor',
failedengine,
promotes_inputs=['throttle', 'propulsor_active'])
self.add_subsystem('motor2', SimpleMotor(efficiency=0.97,
num_nodes=nn))
self.add_subsystem('prop2',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"])
self.connect('motor2.shaft_power_out', 'prop2.shaft_power_in')
self.connect('failedmotor.motor2throttle', 'motor2.throttle')
addpower = AddSubtractComp(
output_name='motors_elec_load',
input_names=['motor1_elec_load', 'motor2_elec_load'],
units='kW',
vec_size=nn)
addpower.add_equation(output_name='thrust',
input_names=['prop1_thrust', 'prop2_thrust'],
units='N',
vec_size=nn)
self.add_subsystem('add_power',
subsys=addpower,
promotes_outputs=['*'])
self.connect('motor1.elec_load', 'add_power.motor1_elec_load')
self.connect('motor2.elec_load', 'add_power.motor2_elec_load')
self.connect('prop1.thrust', 'add_power.prop1_thrust')
self.connect('prop2.thrust', 'add_power.prop2_thrust')
self.add_subsystem('hybrid_split',
PowerSplit(rule='fraction', num_nodes=nn))
self.connect('motors_elec_load', 'hybrid_split.power_in')
self.add_subsystem('eng1',
SimpleTurboshaft(num_nodes=nn,
weight_inc=0.14 / 1000,
weight_base=104),
promotes_outputs=["fuel_flow"])
self.add_subsystem('gen1',
SimpleGenerator(efficiency=0.97, num_nodes=nn))
self.connect('eng1.shaft_power_out', 'gen1.shaft_power_in')
self.add_subsystem('batt1',
SOCBattery(num_nodes=nn, efficiency=0.97),
promotes_inputs=["duration", 'specific_energy'])
self.connect('hybrid_split.power_out_A', 'batt1.elec_load')
# TODO set val= right number of nn
self.add_subsystem(
'eng_throttle_set',
BalanceComp(name='eng_throttle',
val=np.ones((nn, )) * 0.5,
units=None,
eq_units='kW',
rhs_name='gen_power_required',
lhs_name='gen_power_available'))
#need to use the optimizer to drive hybrid_split.power_out_B to the same value as gen1.elec_power_out
self.connect('hybrid_split.power_out_B',
'eng_throttle_set.gen_power_required')
self.connect('gen1.elec_power_out',
'eng_throttle_set.gen_power_available')
self.connect('eng_throttle_set.eng_throttle', 'eng1.throttle')
adder = AddSubtractComp(output_name='motors_weight',
input_names=['motor1_weight', 'motor2_weight'],
units='kg')
adder.add_equation(output_name='propellers_weight',
input_names=['prop1_weight', 'prop2_weight'],
units='kg')
adder.add_equation(output_name='motors_heat',
input_names=['motor1_heat', 'motor2_heat'],
vec_size=nn,
units='W')
self.add_subsystem('adder',
subsys=adder,
promotes_inputs=['*'],
promotes_outputs=['*'])
relabel = [[
'hybrid_split_A_in', 'battery_load',
np.ones(nn) * 260.0, 'kW'
]]
self.add_subsystem('relabel',
DVLabel(relabel),
promotes_outputs=["battery_load"])
self.connect('hybrid_split.power_out_A', 'relabel.hybrid_split_A_in')
self.connect('motor1.component_weight', 'motor1_weight')
self.connect('motor2.component_weight', 'motor2_weight')
self.connect('prop1.component_weight', 'prop1_weight')
self.connect('prop2.component_weight', 'prop2_weight')
self.connect('motor1.heat_out', 'motor1_heat')
self.connect('motor2.heat_out', 'motor2_heat')
#connect design variables to model component inputs
self.connect('eng_rating', 'eng1.shaft_power_rating')
self.connect('prop_diameter', ['prop1.diameter', 'prop2.diameter'])
self.connect('motor_rating',
['motor1.elec_power_rating', 'motor2.elec_power_rating'])
self.connect('motor_rating',
['prop1.power_rating', 'prop2.power_rating'])
self.connect('gen_rating', 'gen1.elec_power_rating')
self.connect('batt_weight', 'batt1.battery_weight')
iv = self.add_subsystem('iv', IndepVarComp(), promotes_outputs=['*'])
iv.add_output('rho_coolant',
val=997 * np.ones((nn, )),
units='kg/m**3')
lc_promotes = ['duration', 'channel_*', 'n_parallel']
self.add_subsystem('batteryheatsink',
LiquidCooledComp(num_nodes=nn, quasi_steady=False),
promotes_inputs=lc_promotes)
self.connect('batt1.heat_out', 'batteryheatsink.q_in')
self.connect('batt_weight', 'batteryheatsink.mass')
self.add_subsystem('motorheatsink',
LiquidCooledComp(num_nodes=nn, quasi_steady=False),
promotes_inputs=lc_promotes)
self.connect('motors_heat', 'motorheatsink.q_in')
self.connect('motors_weight', 'motorheatsink.mass')
self.add_subsystem('duct',
ExplicitIncompressibleDuct(num_nodes=nn),
promotes_inputs=['fltcond|*'])
iv.add_output('ac|propulsion|thermal|duct|area_nozzle',
val=58. * np.ones((nn, )),
units='inch**2')
self.connect('ac|propulsion|thermal|duct|area_nozzle',
'duct.area_nozzle')
self.add_subsystem('hx',
HXGroup(num_nodes=nn),
promotes_inputs=[
'ac|*', ('T_in_cold', 'fltcond|T'),
('rho_cold', 'fltcond|rho')
])
self.connect('duct.mdot', 'hx.mdot_cold')
self.connect('hx.delta_p_cold', 'duct.delta_p_hex')
self.connect('motorheatsink.T_out', 'hx.T_in_hot')
self.connect('rho_coolant', 'hx.rho_hot')
self.add_subsystem(
'reservoir',
CoolantReservoir(num_nodes=nn),
promotes_inputs=['duration', ('mass', 'coolant_mass')])
self.connect('hx.T_out_hot', 'reservoir.T_in')
self.connect('reservoir.T_out', 'batteryheatsink.T_in')
self.connect('batteryheatsink.T_out', 'motorheatsink.T_in')
self.connect('mdot_coolant', [
'batteryheatsink.mdot_coolant', 'motorheatsink.mdot_coolant',
'hx.mdot_hot', 'reservoir.mdot_coolant'
])
def setup(self):
#define design variables that are independent of flight condition or control states
dvlist = [
['ac|propulsion|engine|rating', 'eng_rating', 750, 'hp'],
['ac|propulsion|propeller|diameter', 'prop_diameter', 2.28, 'm'],
]
self.add_subsystem('dvs',
DVLabel(dvlist),
promotes_inputs=["*"],
promotes_outputs=["*"])
nn = self.options['num_nodes']
#introduce model components
self.add_subsystem('eng1',
SimpleTurboshaft(num_nodes=nn,
weight_inc=0.14 / 1000,
weight_base=104),
promotes_inputs=['throttle'])
self.add_subsystem('prop1',
SimplePropeller(num_nodes=nn,
num_blades=4,
design_J=2.2,
design_cp=0.55),
promotes_inputs=["fltcond|*"])
self.add_subsystem(
'eng2',
SimpleTurboshaft(num_nodes=nn,
weight_inc=0.14 / 1000,
weight_base=104))
self.add_subsystem('prop2',
SimplePropeller(num_nodes=nn,
num_blades=4,
design_J=2.2,
design_cp=0.55),
promotes_inputs=["fltcond|*"])
#connect design variables to model component inputs
self.connect('eng_rating', 'eng1.shaft_power_rating')
self.connect('eng_rating', 'eng2.shaft_power_rating')
self.connect('eng_rating', 'prop1.power_rating')
self.connect('eng_rating', 'prop2.power_rating')
self.connect('prop_diameter', 'prop1.diameter')
self.connect('prop_diameter', 'prop2.diameter')
#propulsion models expect a high-level 'throttle' parameter and a 'propulsor_active' flag to set individual throttles
failedengine = ElementMultiplyDivideComp()
failedengine.add_equation('eng2throttle',
input_names=['throttle', 'propulsor_active'],
vec_size=nn)
self.add_subsystem('failedengine',
failedengine,
promotes_inputs=['throttle', 'propulsor_active'])
self.connect('failedengine.eng2throttle', 'eng2.throttle')
#connect components to each other
self.connect('eng1.shaft_power_out', 'prop1.shaft_power_in')
self.connect('eng2.shaft_power_out', 'prop2.shaft_power_in')
#add up the weights, thrusts and fuel flows
add1 = AddSubtractComp(
output_name='fuel_flow',
input_names=['eng1_fuel_flow', 'eng2_fuel_flow'],
vec_size=nn,
units='kg/s')
add1.add_equation(output_name='thrust',
input_names=['prop1_thrust', 'prop2_thrust'],
vec_size=nn,
units='N')
add1.add_equation(output_name='engines_weight',
input_names=['eng1_weight', 'eng2_weight'],
units='kg')
add1.add_equation(output_name='propellers_weight',
input_names=['prop1_weight', 'prop2_weight'],
units='kg')
self.add_subsystem('adder',
subsys=add1,
promotes_inputs=["*"],
promotes_outputs=["*"])
self.connect('prop1.thrust', 'prop1_thrust')
self.connect('prop2.thrust', 'prop2_thrust')
self.connect('eng1.fuel_flow', 'eng1_fuel_flow')
self.connect('eng2.fuel_flow', 'eng2_fuel_flow')
self.connect('prop1.component_weight', 'prop1_weight')
self.connect('prop2.component_weight', 'prop2_weight')
self.connect('eng1.component_weight', 'eng1_weight')
self.connect('eng2.component_weight', 'eng2_weight')
def setup(self):
#define design variables that are independent of flight condition or control states
dvlist = [
['ac|propulsion|engine|rating', 'eng_rating', 260.0, 'kW'],
['ac|propulsion|propeller|diameter', 'prop_diameter', 2.5, 'm'],
['ac|propulsion|motor|rating', 'motor_rating', 240.0, 'kW'],
['ac|propulsion|generator|rating', 'gen_rating', 250.0, 'kW'],
['ac|weights|W_battery', 'batt_weight', 2000, 'kg']
]
self.add_subsystem('dvs',
DVLabel(dvlist),
promotes_inputs=["*"],
promotes_outputs=["*"])
nn = self.options['num_nodes']
e_b = self.options['specific_energy']
#introduce model components
self.add_subsystem('motor1', SimpleMotor(efficiency=0.97,
num_nodes=nn))
self.add_subsystem('prop1',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"])
self.connect('motor1.shaft_power_out', 'prop1.shaft_power_in')
self.add_subsystem('motor2', SimpleMotor(efficiency=0.97,
num_nodes=nn))
self.add_subsystem('prop2',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"])
self.connect('motor2.shaft_power_out', 'prop2.shaft_power_in')
addpower = AddSubtractComp(
output_name='motors_elec_load',
input_names=['motor1_elec_load', 'motor2_elec_load'],
units='kW',
vec_size=nn)
addpower.add_equation(output_name='thrust',
input_names=['prop1_thrust', 'prop2_thrust'],
units='N',
vec_size=nn)
self.add_subsystem('add_power',
subsys=addpower,
promotes_outputs=['*'])
self.connect('motor1.elec_load', 'add_power.motor1_elec_load')
self.connect('motor2.elec_load', 'add_power.motor2_elec_load')
self.connect('prop1.thrust', 'add_power.prop1_thrust')
self.connect('prop2.thrust', 'add_power.prop2_thrust')
self.add_subsystem('hybrid_split',
PowerSplit(rule='fraction', num_nodes=nn))
self.connect('motors_elec_load', 'hybrid_split.power_in')
self.add_subsystem('eng1',
SimpleTurboshaft(num_nodes=nn,
weight_inc=0.14 / 1000,
weight_base=104),
promotes_outputs=["fuel_flow"])
self.add_subsystem('gen1',
SimpleGenerator(efficiency=0.97, num_nodes=nn))
self.connect('eng1.shaft_power_out', 'gen1.shaft_power_in')
self.add_subsystem('batt1',
SimpleBattery(num_nodes=nn, specific_energy=e_b))
self.connect('hybrid_split.power_out_A', 'batt1.elec_load')
self.add_subsystem(
'eng_gen_resid',
AddSubtractComp(
output_name='eng_gen_residual',
input_names=['gen_power_available', 'gen_power_required'],
vec_size=nn,
units='kW',
scaling_factors=[1, -1]))
#need to use the optimizer to drive hybrid_split.power_out_B to the same value as gen1.elec_power_out
self.connect('hybrid_split.power_out_B',
'eng_gen_resid.gen_power_required')
self.connect('gen1.elec_power_out',
'eng_gen_resid.gen_power_available')
addweights = AddSubtractComp(
output_name='motors_weight',
input_names=['motor1_weight', 'motor2_weight'],
units='kg')
addweights.add_equation(output_name='propellers_weight',
input_names=['prop1_weight', 'prop2_weight'],
units='kg')
self.add_subsystem('add_weights',
subsys=addweights,
promotes_inputs=['*'],
promotes_outputs=['*'])
relabel = [[
'hybrid_split_A_in', 'battery_load',
np.ones(nn) * 260.0, 'kW'
]]
self.add_subsystem('relabel',
DVLabel(relabel),
promotes_outputs=["battery_load"])
self.connect('hybrid_split.power_out_A', 'relabel.hybrid_split_A_in')
self.connect('motor1.component_weight', 'motor1_weight')
self.connect('motor2.component_weight', 'motor2_weight')
self.connect('prop1.component_weight', 'prop1_weight')
self.connect('prop2.component_weight', 'prop2_weight')
#connect design variables to model component inputs
self.connect('eng_rating', 'eng1.shaft_power_rating')
self.connect('prop_diameter', ['prop1.diameter', 'prop2.diameter'])
self.connect('motor_rating',
['motor1.elec_power_rating', 'motor2.elec_power_rating'])
self.connect('motor_rating',
['prop1.power_rating', 'prop2.power_rating'])
self.connect('gen_rating', 'gen1.elec_power_rating')
self.connect('batt_weight', 'batt1.battery_weight')
def setup(self):
nn = self.options['num_nodes']
e_b = self.options['specific_energy']
# define design variables that are independent of flight condition or control states
dvlist = [
['ac|propulsion|engine|rating', 'eng_rating', 260.0, 'kW'],
['ac|propulsion|propeller|diameter', 'prop_diameter', 2.5, 'm'],
['ac|propulsion|motor|rating', 'motor_rating', 240.0, 'kW'],
['ac|propulsion|generator|rating', 'gen_rating', 250.0, 'kW'],
['ac|weights|W_battery', 'batt_weight', 2000, 'kg']
]
self.add_subsystem('dvs',
DVLabel(dvlist),
promotes_inputs=["*"],
promotes_outputs=["*"])
# introduce model components
self.add_subsystem('motor1', SimpleMotor(efficiency=0.97,
num_nodes=nn))
self.add_subsystem('prop1',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"],
promotes_outputs=['thrust'])
self.connect('motor1.shaft_power_out', 'prop1.shaft_power_in')
self.add_subsystem('hybrid_split',
PowerSplit(rule='fraction', num_nodes=nn))
self.connect('motor1.elec_load', 'hybrid_split.power_in')
self.add_subsystem('eng1',
SimpleTurboshaft(num_nodes=nn,
weight_inc=0.14 / 1000,
weight_base=104),
promotes_outputs=["fuel_flow"])
self.add_subsystem('gen1',
SimpleGenerator(efficiency=0.97, num_nodes=nn))
self.connect('eng1.shaft_power_out', 'gen1.shaft_power_in')
self.add_subsystem('batt1',
SimpleBattery(num_nodes=nn, specific_energy=e_b))
self.connect('hybrid_split.power_out_A', 'batt1.elec_load')
# need to use the optimizer to drive hybrid_split.power_out_B to the
# same value as gen1.elec_power_out.
# create a residual equation for power in vs power out from the generator
self.add_subsystem(
'eng_gen_resid',
AddSubtractComp(
output_name='eng_gen_residual',
input_names=['gen_power_available', 'gen_power_required'],
vec_size=nn,
units='kW',
scaling_factors=[1, -1]))
self.connect('hybrid_split.power_out_B',
'eng_gen_resid.gen_power_required')
self.connect('gen1.elec_power_out',
'eng_gen_resid.gen_power_available')
# add the weights of all the motors and props
# (forward-compatibility for twin series hybrid layout)
addweights = AddSubtractComp(output_name='motors_weight',
input_names=['motor1_weight'],
units='kg')
addweights.add_equation(output_name='propellers_weight',
input_names=['prop1_weight'],
units='kg')
self.add_subsystem('add_weights',
subsys=addweights,
promotes_inputs=['*'],
promotes_outputs=['*'])
self.connect('motor1.component_weight', 'motor1_weight')
self.connect('prop1.component_weight', 'prop1_weight')
#connect design variables to model component inputs
self.connect('eng_rating', 'eng1.shaft_power_rating')
self.connect('prop_diameter', ['prop1.diameter'])
self.connect('motor_rating', ['motor1.elec_power_rating'])
self.connect('motor_rating', ['prop1.power_rating'])
self.connect('gen_rating', 'gen1.elec_power_rating')
self.connect('batt_weight', 'batt1.battery_weight')
def setup(self):
nn = self.options['num_nodes']
#define design variables that are independent of flight condition or control states
dvlist = [
['ac|propulsion|engine|rating', 'eng_rating', 260.0, 'kW'],
['ac|propulsion|propeller|diameter', 'prop_diameter', 2.5, 'm'],
['ac|propulsion|motor|rating', 'motor_rating', 240.0, 'kW'],
['ac|propulsion|generator|rating', 'gen_rating', 250.0, 'kW'],
['ac|weights|W_battery', 'batt_weight', 2000, 'kg'],
[
'ac|propulsion|thermal|hx|mdot_coolant', 'mdot_coolant',
0.1 * np.ones((nn, )), 'kg/s'
],
[
'ac|propulsion|thermal|hx|coolant_mass', 'coolant_mass', 10.,
'kg'
],
[
'ac|propulsion|thermal|hx|channel_width', 'channel_width', 1.,
'mm'
],
[
'ac|propulsion|thermal|hx|channel_height', 'channel_height',
20., 'mm'
],
[
'ac|propulsion|thermal|hx|channel_length', 'channel_length',
0.2, 'm'
],
['ac|propulsion|thermal|hx|n_parallel', 'n_parallel', 50, None],
# ['ac|propulsion|thermal|duct|area_nozzle','area_nozzle',58.*np.ones((nn,)),'inch**2'],
[
'ac|propulsion|battery|specific_energy', 'specific_energy',
300, 'W*h/kg'
]
]
self.add_subsystem('dvs',
DVLabel(dvlist),
promotes_inputs=["*"],
promotes_outputs=["*"])
#introduce model components
self.add_subsystem('motor1',
SimpleMotor(efficiency=0.97, num_nodes=nn),
promotes_inputs=['throttle'])
self.add_subsystem('prop1',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"])
self.connect('motor1.shaft_power_out', 'prop1.shaft_power_in')
#propulsion models expect a high-level 'throttle' parameter and a 'propulsor_active' flag to set individual throttles
failedengine = ElementMultiplyDivideComp()
failedengine.add_equation('motor2throttle',
input_names=['throttle', 'propulsor_active'],
vec_size=nn)
self.add_subsystem('failedmotor',
failedengine,
promotes_inputs=['throttle', 'propulsor_active'])
self.add_subsystem('motor2', SimpleMotor(efficiency=0.97,
num_nodes=nn))
self.add_subsystem('prop2',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"])
self.connect('motor2.shaft_power_out', 'prop2.shaft_power_in')
self.connect('failedmotor.motor2throttle', 'motor2.throttle')
addpower = AddSubtractComp(output_name='total_elec_load',
input_names=[
'motor1_elec_load', 'motor2_elec_load',
'refrig_elec_load'
],
units='kW',
vec_size=nn)
addpower.add_equation(output_name='thrust',
input_names=['prop1_thrust', 'prop2_thrust'],
units='N',
vec_size=nn)
self.add_subsystem('add_power',
subsys=addpower,
promotes_outputs=['*'])
self.connect('motor1.elec_load', 'add_power.motor1_elec_load')
self.connect('motor2.elec_load', 'add_power.motor2_elec_load')
self.connect('prop1.thrust', 'add_power.prop1_thrust')
self.connect('prop2.thrust', 'add_power.prop2_thrust')
self.add_subsystem('hybrid_split',
PowerSplit(rule='fraction', num_nodes=nn))
self.connect('total_elec_load', 'hybrid_split.power_in')
self.add_subsystem('eng1',
SimpleTurboshaft(num_nodes=nn,
weight_inc=0.14 / 1000,
weight_base=104),
promotes_outputs=["fuel_flow"])
self.add_subsystem('gen1',
SimpleGenerator(efficiency=0.97, num_nodes=nn))
self.connect('eng1.shaft_power_out', 'gen1.shaft_power_in')
self.add_subsystem('batt1',
SOCBattery(num_nodes=nn, efficiency=0.97),
promotes_inputs=["duration", 'specific_energy'])
self.connect('hybrid_split.power_out_A', 'batt1.elec_load')
# TODO set val= right number of nn
self.add_subsystem(
'eng_throttle_set',
BalanceComp(name='eng_throttle',
val=np.ones((nn, )) * 0.5,
units=None,
eq_units='kW',
rhs_name='gen_power_required',
lhs_name='gen_power_available'))
#need to use the optimizer to drive hybrid_split.power_out_B to the same value as gen1.elec_power_out
self.connect('hybrid_split.power_out_B',
'eng_throttle_set.gen_power_required')
self.connect('gen1.elec_power_out',
'eng_throttle_set.gen_power_available')
self.connect('eng_throttle_set.eng_throttle', 'eng1.throttle')
adder = AddSubtractComp(output_name='motors_weight',
input_names=['motor1_weight', 'motor2_weight'],
units='kg')
adder.add_equation(output_name='propellers_weight',
input_names=['prop1_weight', 'prop2_weight'],
units='kg')
adder.add_equation(output_name='motors_heat',
input_names=['motor1_heat', 'motor2_heat'],
vec_size=nn,
units='W')
self.add_subsystem('adder',
subsys=adder,
promotes_inputs=['*'],
promotes_outputs=['*'])
relabel = [[
'hybrid_split_A_in', 'battery_load',
np.ones(nn) * 260.0, 'kW'
]]
self.add_subsystem('relabel',
DVLabel(relabel),
promotes_outputs=["battery_load"])
self.connect('hybrid_split.power_out_A', 'relabel.hybrid_split_A_in')
self.connect('motor1.component_weight', 'motor1_weight')
self.connect('motor2.component_weight', 'motor2_weight')
self.connect('prop1.component_weight', 'prop1_weight')
self.connect('prop2.component_weight', 'prop2_weight')
self.connect('motor1.heat_out', 'motor1_heat')
self.connect('motor2.heat_out', 'motor2_heat')
#connect design variables to model component inputs
self.connect('eng_rating', 'eng1.shaft_power_rating')
self.connect('prop_diameter', ['prop1.diameter', 'prop2.diameter'])
self.connect('motor_rating',
['motor1.elec_power_rating', 'motor2.elec_power_rating'])
self.connect('motor_rating',
['prop1.power_rating', 'prop2.power_rating'])
self.connect('gen_rating', 'gen1.elec_power_rating')
self.connect('batt_weight', 'batt1.battery_weight')
iv = self.add_subsystem('iv', IndepVarComp(), promotes_outputs=['*'])
rho_coolant = 997. # kg/m^3
iv.add_output('rho_coolant',
val=rho_coolant * np.ones((nn, )),
units='kg/m**3')
lc_promotes = ['duration', 'channel_*', 'n_parallel']
# Add the refrigerators electrical load to the splitter with the two motors
# so it pulls power from both the battery and turboshaft at the hybridization ratio
self.add_subsystem(
'refrig',
HeatPumpWithIntegratedCoolantLoop(
num_nodes=nn,
hot_side_balance_param_units='inch**2',
hot_side_balance_param_lower=1e-10,
hot_side_balance_param_upper=1e3))
self.connect('refrig.Wdot', 'add_power.refrig_elec_load')
iv.add_output('refrig_eff_factor', val=0.4, shape=None, units=None)
iv.add_output('refrig_T_h_set', val=450., shape=(nn, ), units='K')
iv.add_output('refrig_T_c_set', val=280., shape=(nn, ), units='K')
iv.add_output('bypass_refrig',
val=np.zeros((nn, )),
shape=(nn, ),
units=None)
self.connect('refrig_eff_factor', 'refrig.eff_factor')
self.connect('refrig_T_h_set', 'refrig.T_h_set')
self.connect('refrig_T_c_set', 'refrig.T_c_set')
self.connect('bypass_refrig', 'refrig.bypass_heat_pump')
# Coolant loop on electrical component side (cooling side of refrigerator)
# ,---> battery ---> motor ---,
# | |
# '---- refrig cold side <----'
self.add_subsystem('batteryheatsink',
LiquidCooledComp(num_nodes=nn, quasi_steady=False),
promotes_inputs=lc_promotes)
self.connect('batt1.heat_out', 'batteryheatsink.q_in')
self.connect('batt_weight', 'batteryheatsink.mass')
self.connect('refrig.T_out_cold', 'batteryheatsink.T_in')
self.add_subsystem('motorheatsink',
LiquidCooledComp(num_nodes=nn, quasi_steady=False),
promotes_inputs=lc_promotes)
self.connect('motors_heat', 'motorheatsink.q_in')
self.connect('motors_weight', 'motorheatsink.mass')
self.connect('motorheatsink.T_out', 'refrig.T_in_cold')
self.connect('batteryheatsink.T_out', 'motorheatsink.T_in')
self.connect('mdot_coolant', [
'batteryheatsink.mdot_coolant', 'motorheatsink.mdot_coolant',
'refrig.mdot_coolant_cold'
])
# Coolant loop on hot side of refrigerator to reject heat
# ,----> refrigerator hot side -----,
# | |
# '----- heat exchanger/duct <------'
self.add_subsystem('duct',
ExplicitIncompressibleDuct(num_nodes=nn),
promotes_inputs=['fltcond|*'])
self.add_subsystem('hx',
HXGroup(num_nodes=nn),
promotes_inputs=[
'ac|*', ('rho_cold', 'fltcond|rho'),
('T_in_cold', 'fltcond|T')
])
self.connect('duct.mdot', 'hx.mdot_cold')
self.connect('hx.delta_p_cold', 'duct.delta_p_hex')
self.connect('rho_coolant', 'hx.rho_hot')
self.connect('refrig.T_out_hot', 'hx.T_in_hot')
self.connect('hx.T_out_hot', 'refrig.T_in_hot')
# Modulate the duct inlet area to maintain the desired temperature on the hot side of the refrig
self.connect('refrig.hot_side_balance_param', 'duct.area_nozzle')
self.connect('mdot_coolant',
['refrig.mdot_coolant_hot', 'hx.mdot_hot'])
def setup(self):
nn = self.options['num_nodes']
#define design variables that are independent of flight condition or control states
dvlist = [
['ac|propulsion|engine|rating', 'eng_rating', 260.0, 'kW'],
['ac|propulsion|propeller|diameter', 'prop_diameter', 2.5, 'm'],
['ac|propulsion|motor|rating', 'motor_rating', 240.0, 'kW'],
['ac|propulsion|generator|rating', 'gen_rating', 250.0, 'kW'],
['ac|weights|W_battery', 'batt_weight', 2000, 'kg'],
[
'ac|propulsion|battery|specific_energy', 'specific_energy',
300, 'W*h/kg'
]
]
self.add_subsystem('dvs',
DVLabel(dvlist),
promotes_inputs=["*"],
promotes_outputs=["*"])
#introduce model components
self.add_subsystem('motor1',
SimpleMotor(efficiency=0.97, num_nodes=nn),
promotes_inputs=['throttle'])
self.add_subsystem('prop1',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"])
self.connect('motor1.shaft_power_out', 'prop1.shaft_power_in')
#propulsion models expect a high-level 'throttle' parameter and a 'propulsor_active' flag to set individual throttles
failedengine = ElementMultiplyDivideComp()
failedengine.add_equation('motor2throttle',
input_names=['throttle', 'propulsor_active'],
vec_size=nn)
self.add_subsystem('failedmotor',
failedengine,
promotes_inputs=['throttle', 'propulsor_active'])
self.add_subsystem('motor2', SimpleMotor(efficiency=0.97,
num_nodes=nn))
self.add_subsystem('prop2',
SimplePropeller(num_nodes=nn),
promotes_inputs=["fltcond|*"])
self.connect('motor2.shaft_power_out', 'prop2.shaft_power_in')
self.connect('failedmotor.motor2throttle', 'motor2.throttle')
addpower = AddSubtractComp(
output_name='motors_elec_load',
input_names=['motor1_elec_load', 'motor2_elec_load'],
units='kW',
vec_size=nn)
addpower.add_equation(output_name='thrust',
input_names=['prop1_thrust', 'prop2_thrust'],
units='N',
vec_size=nn)
self.add_subsystem('add_power',
subsys=addpower,
promotes_outputs=['*'])
self.connect('motor1.elec_load', 'add_power.motor1_elec_load')
self.connect('motor2.elec_load', 'add_power.motor2_elec_load')
self.connect('prop1.thrust', 'add_power.prop1_thrust')
self.connect('prop2.thrust', 'add_power.prop2_thrust')
self.add_subsystem('hybrid_split',
PowerSplit(rule='fraction', num_nodes=nn))
self.connect('motors_elec_load', 'hybrid_split.power_in')
self.add_subsystem('eng1',
SimpleTurboshaft(num_nodes=nn,
weight_inc=0.14 / 1000,
weight_base=104),
promotes_outputs=["fuel_flow"])
self.add_subsystem('gen1',
SimpleGenerator(efficiency=0.97, num_nodes=nn))
self.connect('eng1.shaft_power_out', 'gen1.shaft_power_in')
self.add_subsystem('batt1',
SOCBattery(num_nodes=nn, efficiency=0.97),
promotes_inputs=["duration", "specific_energy"])
self.connect('hybrid_split.power_out_A', 'batt1.elec_load')
# TODO set val= right number of nn
self.add_subsystem(
'eng_throttle_set',
BalanceComp(name='eng_throttle',
val=np.ones((nn, )) * 0.5,
units=None,
eq_units='kW',
rhs_name='gen_power_required',
lhs_name='gen_power_available'))
#need to use the optimizer to drive hybrid_split.power_out_B to the same value as gen1.elec_power_out
self.connect('hybrid_split.power_out_B',
'eng_throttle_set.gen_power_required')
self.connect('gen1.elec_power_out',
'eng_throttle_set.gen_power_available')
self.connect('eng_throttle_set.eng_throttle', 'eng1.throttle')
addweights = AddSubtractComp(
output_name='motors_weight',
input_names=['motor1_weight', 'motor2_weight'],
units='kg')
addweights.add_equation(output_name='propellers_weight',
input_names=['prop1_weight', 'prop2_weight'],
units='kg')
self.add_subsystem('add_weights',
subsys=addweights,
promotes_inputs=['*'],
promotes_outputs=['*'])
relabel = [[
'hybrid_split_A_in', 'battery_load',
np.ones(nn) * 260.0, 'kW'
]]
self.add_subsystem('relabel',
DVLabel(relabel),
promotes_outputs=["battery_load"])
self.connect('hybrid_split.power_out_A', 'relabel.hybrid_split_A_in')
self.connect('motor1.component_weight', 'motor1_weight')
self.connect('motor2.component_weight', 'motor2_weight')
self.connect('prop1.component_weight', 'prop1_weight')
self.connect('prop2.component_weight', 'prop2_weight')
#connect design variables to model component inputs
self.connect('eng_rating', 'eng1.shaft_power_rating')
self.connect('prop_diameter', ['prop1.diameter', 'prop2.diameter'])
self.connect('motor_rating',
['motor1.elec_power_rating', 'motor2.elec_power_rating'])
self.connect('motor_rating',
['prop1.power_rating', 'prop2.power_rating'])
self.connect('gen_rating', 'gen1.elec_power_rating')
self.connect('batt_weight', 'batt1.battery_weight')
