def extract(cls, node):
dst_type = lambda x: mo_array(x)
scale = onnx_attr(node,
'scale',
'f',
default=mo_array(1.0),
dst_type=dst_type)
bias = onnx_attr(node,
'bias',
'floats',
default=None,
dst_type=dst_type)
# Expand dims for bias in case if it is not scalar
if bias.ndim != 0:
broadcast_dims_cnt = 2 if node.graph.graph[
'layout'] == 'NCHW' else 0
for idx in range(broadcast_dims_cnt):
bias = np.expand_dims(bias, axis=-1)
node['scale'] = scale
node['bias'] = bias
return cls.enabled
def extract(cls, node):
mode = onnx_attr(node,
'mode',
's',
default='constant',
dst_type=lambda x: x.decode())
# Pytorch 1.3 while converting to opset 11, creates Pad from older opset.
# To be able to convert such models we have to check if pads attribute exists.
pads = onnx_attr(node, 'pads', 'ints', dst_type=int64_array)
if get_onnx_opset_version(node) < 11 or pads is not None:
value = onnx_attr(node, 'value', 'f', default=0.)
assert pads is not None, 'pads is required attribute for Pad operation'
# MO Pad op and ONNX Pad op have different format for pads values
# MO Pad has Dx2 where D is the total number of dimensions
# ONNX Pad pads flat layout, so need to reshape and transpose
pads = np.transpose(pads.reshape([2, -1]))
AttributedPad.update_node_stat(node, {
'mode': mode,
'pads': pads,
'fill_value': value
})
else:
ONNXPad.update_node_stat(node, {'mode': mode})
return cls.enabled
def extract(cls, node):
# borders: leftBorder, topBorder, rightBorder, bottomBordes
borders = onnx_attr(node,
'border',
'ints',
default=None,
dst_type=int64_array)
scale = onnx_attr(node,
'scale',
'ints',
default=None,
dst_type=int64_array)
# Crop reference: https://github.com/onnx/onnx/blob/master/docs/Operators.md#Crop
if len(borders) != 4:
log.error(
'ONNX Crop layer {} should take exactly 4 borders instead of {}'
.format(node.name, len(borders)))
return False
attrs = {'axis': int64_array([2, 3])}
if scale is not None:
attrs.update({
'dim': scale,
'offset': int64_array([borders[1], borders[0]])
})
else:
attrs.update({
'crop_begin': int64_array([borders[1], borders[0]]),
'crop_end': int64_array([borders[3], borders[2]])
})
Crop.update_node_stat(node, attrs)
return CropFrontExtractor.enabled
def extract(cls, node: Node):
onnx_opset_version = get_onnx_opset_version(node)
if onnx_opset_version is not None and onnx_opset_version >= 11:
mode = onnx_attr(node, 'mode', 's', default=b'nearest').decode()
transformation_mode = onnx_attr(node,
'coordinate_transformation_mode',
's',
default=b'half_pixel').decode()
nearest_mode = onnx_attr(node,
'nearest_mode',
's',
default=b'round_prefer_floor').decode()
cubic_coeff_a = onnx_attr(node,
'cubic_coeff_a',
'f',
default=-0.75)
attrs = {
'mode': mode,
'coordinate_transformation_mode': transformation_mode,
'nearest_mode': nearest_mode,
'cube_coeff': cubic_coeff_a
}
ONNXResize11Op.update_node_stat(node, attrs)
else:
mode = onnx_attr(node, 'mode', 's', default=b'nearest').decode()
ONNXResize10.update_node_stat(node, {'mode': mode})
return cls.enabled
def extract(cls, node):
attrs = {
'eps': mo_array(onnx_attr(node, 'eps', 'f', default=1e-6), dtype=np.float),
'num_groups': int64_array(onnx_attr(node, 'num_groups', 'i', default=1)),
}
GroupNorm.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
attrs = dict(h=onnx_attr(node, 'h', 'i', 0),
w=onnx_attr(node, 'w', 'i', 0),
stride_x=onnx_attr(node, 'stride_x', 'f', 0),
stride_y=onnx_attr(node, 'stride_y', 'f', 0),
flatten=onnx_attr(node, 'flatten', 'i', 1))
ExperimentalDetectronPriorGridGenerator.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
exclusive = onnx_attr(node, 'exclusive', 'i', 0)
reverse = onnx_attr(node, 'reverse', 'i', 0)
CumSum.update_node_stat(node, {
'exclusive': exclusive,
'reverse': reverse
})
return cls.enabled
def replace_op(self, graph: Graph, node: Node):
alpha = onnx_attr(node, 'alpha', 'f', default=0.2)
beta = onnx_attr(node, 'beta', 'f', default=0.5)
hard_sigmoid = create_op_with_const_inputs(graph, HardSigmoid, {1: np.array(alpha), 2: np.array(beta)},
{'name': node.name + '/HardSigmoid_'})
node.in_port(0).get_connection().set_destination(hard_sigmoid.in_port(0))
return [hard_sigmoid.id]
def extract(cls, node):
attrs = dict(min_size=onnx_attr(node, 'min_size', 'f', 0.0),
nms_threshold=onnx_attr(node, 'nms_threshold', 'f', 0.7),
post_nms_count=onnx_attr(node, 'post_nms_count', 'i',
1000),
pre_nms_count=onnx_attr(node, 'pre_nms_count', 'i', 1000))
ExperimentalDetectronGenerateProposalsSingleImage.update_node_stat(
node, attrs)
return cls.enabled
def extract(cls, node):
attrs = {
'alpha': onnx_attr(node, 'alpha', 'f', 1e-4),
'beta': onnx_attr(node, 'beta', 'f', 0.75),
'bias': onnx_attr(node, 'bias', 'f', 1.0),
'local_size': onnx_attr(node, 'size', 'i', None),
}
AttributedLRN.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
batch_axis = onnx_attr(node, 'batch_axis', 'i', default=1)
time_axis = onnx_attr(node, 'time_axis', 'i', default=0)
attrs = {
'batch_axis': batch_axis,
'seq_axis': time_axis,
}
ReverseSequence.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
onnx_opset_version = get_onnx_opset_version(node)
if onnx_opset_version is not None and onnx_opset_version >= 9:
mode = onnx_attr(node,
'mode',
's',
default='nearest',
dst_type=lambda x: x.decode())
ONNXResize10.update_node_stat(node, {'mode': mode})
else:
mode = onnx_attr(node,
'mode',
's',
default='nearest',
dst_type=lambda x: x.decode())
scales = onnx_attr(
node,
'scales',
'floats',
dst_type=lambda x: np.array(x, dtype=np.float32))
width_scale = onnx_attr(node, 'width_scale', 'f')
height_scale = onnx_attr(node, 'height_scale', 'f')
supported_modes = ['nearest', 'linear']
if mode not in supported_modes:
raise Error(
'Error decoding Upsample node {}, mode = {} is not in the list of supported modes {}.',
node.name, mode, supported_modes)
if scales is not None:
if scales.shape != (4, ):
raise Error(
'Upsample scales attribute is wrong for node {}. Only 4D scales are supported.',
node.name)
if math.fabs(scales[0] - 1) > 1e-5 or math.fabs(scales[1] -
1) > 1e-5:
raise Error(
'Upsampling of batch and feature dimensions is not supported for node {}.',
node.name)
height_scale = scales[2]
width_scale = scales[3]
if (width_scale is None
or height_scale is None) and len(node.in_nodes()) != 2:
raise Error(
'One/both of widths_scale = {} and height_scale = {} is not defined for Upsample node {}.',
width_scale, height_scale, node.name)
UpsampleOp.update_node_stat(
node, {
'mode': mode,
'height_scale': height_scale,
'width_scale': width_scale
})
return cls.enabled
def extract(cls, node):
dst_type = lambda x: np.array(x)
scale = onnx_attr(node, 'alpha', 'f', default=None, dst_type=dst_type)
bias = onnx_attr(node, 'beta', 'f', default=None, dst_type=dst_type)
node['scale'] = scale
node['bias'] = bias
node['op'] = 'ImageScaler'
return cls.enabled
def extract(cls, node: Node):
shape = onnx_attr(node, 'shape', 'ints', default=None, dst_type=int64_array)
out_type = get_onnx_datatype_as_numpy(onnx_attr(node, 'dtype', 'i', default=1))
seed = onnx_attr(node, 'seed', 'f', default=0.0)
min_val = onnx_attr(node, 'low', 'f', default=0.0)
max_val = onnx_attr(node, 'high', 'f', default=1.0)
AttributedRandomUniform.update_node_stat(node, {'shape': shape,
'output_type': out_type,
'seed': seed,
'min_val': out_type(min_val),
'max_val': out_type(max_val)})
return cls.enabled
def extract(cls, node):
attrs = {
'p': onnx_attr(node, 'p', 'i', 2),
'axis': onnx_attr(node, 'axis', 'i', -1),
'eps_mode': 'add', # TODO check ONNX implementation
'eps': 1e-6, # TODO check ONNX implementation
}
if attrs['p'] == 1:
log.debug('The node {} has unsupported attribute "p" = {}'.format(node.soft_get('name'), attrs['p']))
return False
NormalizeL2Op.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
keepdims = onnx_attr(node, 'keepdims', 'i', default=1)
axis = onnx_attr(node, 'axis', 'i', default=0)
attrs = {
'axis': axis,
'top_k': 1,
'keepdims': keepdims,
'remove_values_output': True
}
ArgMinOp.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
across_spatial = onnx_attr(node, 'across_spatial', 'i', default=0)
channel_shared = onnx_attr(node, 'channel_shared', 'i', default=0)
eps = onnx_attr(node, 'eps', 'f', default=0)
attrs = {'across_spatial': bool(across_spatial),
'channel_shared': bool(channel_shared),
'eps': eps,
'layout': 'NCHW'}
# update the attributes of the node
NormalizeOp.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
# update the attributes of the node
node_name = node.soft_get('name', node.id)
block_size = onnx_attr(node, 'blocksize', 'i', default=None)
assert block_size is not None, \
'DepthToSpace should have "blocksize" attribute specified for node {}'.format(node_name)
onnx_mode = onnx_attr(node, 'mode', 's', default=b'DCR').decode()
assert onnx_mode in ['DCR', 'CRD'], 'Unrecognized mode provided for DepthToSpace node {}'.format(node_name)
if onnx_mode == 'DCR':
mode = 'blocks_first'
else:
mode = 'depth_first'
DepthToSpaceOp.update_node_stat(node, {'block_size': block_size, 'mode': mode})
return cls.enabled
def extract(cls, node):
attrs = {
'merge_repeated':
bool(onnx_attr(node, 'merge_repeated', 'i', default=1)),
}
CTCGreedyDecoderSeqLenOp.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, einsum_node):
einsum_name = einsum_node.soft_get('name', einsum_node.id)
equation = onnx_attr(einsum_node, 'equation',
's').decode(encoding="utf-8")
normalized_equation = Einsum.normalize_equation(einsum_name, equation)
Einsum.update_node_stat(einsum_node, {'equation': normalized_equation})
return cls.enabled
def extract(cls, node):
attr_dict = {
'data_format': 'NCHW',
'eps': onnx_attr(node, 'epsilon', 'f', 1e-5),
}
BatchNormInference.update_node_stat(node, attr_dict)
return cls.enabled
def extract(cls, node):
mode = onnx_attr(node, 'mode', 's', default=b'avg').decode()
output_height = onnx_attr(node, 'output_height', 'i', default=1)
output_width = onnx_attr(node, 'output_width', 'i', default=1)
sampling_ratio = onnx_attr(node, 'sampling_ratio', 'i', default=0)
spatial_scale = onnx_attr(node, 'spatial_scale', 'f', default=1.0)
ROIAlign.update_node_stat(
node, {
'pooled_h': output_height,
'pooled_w': output_width,
'sampling_ratio': sampling_ratio,
'spatial_scale': spatial_scale,
'mode': mode
})
return cls.enabled
def extract(cls, node):
attrs = {}
if get_onnx_opset_version(node) >= 13:
axis = onnx_attr(node, 'axis', 'i', default=None)
attrs.update(axis=axis)
QuantizeLinear.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
encoding_map = {0: 'corner', 1: 'center'}
center_point_box = onnx_attr(node, 'center_point_box', 'i', default=0)
NonMaxSuppression.update_node_stat(node, {'sort_result_descending': 0,
'output_type': np.int64,
'box_encoding': encoding_map[center_point_box]})
return cls.enabled
def extract(cls, node):
attrs = {
'axis':
np.array(onnx_attr(node, 'axis', 'i', default=0), dtype=np.int64)
}
AttributedGather.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
dim = onnx_attr(node, 'shape', 'ints', None)
if dim is not None:
dim = int64_array(dim)
Reshape.update_node_stat(node, {'dim': dim})
else:
Reshape.update_node_stat(node)
return cls.enabled
def extract(cls, node):
"""
TopK-1 (k as attribute, required)
TopK-10 (k as input, no sorting manipulations)
TopK-11 (k as input, sorting manipulations through `sorted` and `largest` attrs)
"""
attrs = {
'axis': onnx_attr(node, 'axis', 'i', default=-1),
'index_element_type': np.int64
}
if onnx_node_has_attr(node, 'k'):
attrs['k'] = onnx_attr(node, 'k', 'i')
attrs['sort'] = 'value' if onnx_attr(node, 'sorted', 'i', default=1) else 'none'
attrs['mode'] = 'max' if onnx_attr(node, 'largest', 'i', default=1) else 'min'
TopK.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node: Node):
scale = onnx_attr(node,
'scale',
'f',
default=mo_array(1.0),
dst_type=lambda x: mo_array(x))
AttributedPower.update_node_stat(node, {'scale': scale})
return cls.enabled
def extract(cls, node):
axis = int64_array(onnx_attr(node, 'axes', 'ints', default=[]))
attrs = {'squeeze_dims': axis if len(axis) != 0 else None}
# update the attributes of the node
Squeeze.update_node_stat(node, attrs)
return cls.enabled
def extract(cls, node):
negative_slope = onnx_attr(node, 'alpha', 'f', default=1.0)
if negative_slope == 0:
ReLU.update_node_stat(node)
else:
LeakyReLU.update_node_stat(node,
{'negative_slope': negative_slope})
return cls.enabled
