def setUp(self):
logger.info('setUp start')
login.loginWeb(self)
self.driver.implicitly_wait(10)
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
def setUp(self):
logger.info('setUp start')
login.loginWeb(self) # admin账号登录
self.driver.implicitly_wait(10)
plug = NetworkConfig_LANpage(self.driver, self.url)
# 打开网络配置 - 内网配置
plug.click_NetworkConfig()
time.sleep(0.5)
plug.click_LANconfig()
time.sleep(1)
plug.click_globalconfig()
time.sleep(1)
def tearDown(self):
#删除
dhcpserver = DHCPserverpage(self.driver, self.url)
dhcpserver.click_NetworkConfig()
time.sleep(0.5)
dhcpserver.click_DHCPserver()
time.sleep(1)
dhcpserver.click_list_delpool2()
time.sleep(1)
dhcpserver.click_ok()
time.sleep(1)
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_allsel()
time.sleep(1)
lanpage.click_delete()
time.sleep(1)
lanpage.click_ok()
time.sleep(1)
self.driver.quit()
logger.info('tearDown over')
logger.info('%s' % ('=' * 50))
def test_001_open(self):
u'''开启即插即用 错误的IP，依旧上网'''
plug = NetworkConfig_LANpage(self.driver, self.url)
saveSucess = getAssertText('saveSucess')
#开启UPNP
plug.click_upnpEN()
time.sleep(0.5)
plug.click_save()
time.sleep(1)
# 断言 开启提示信息是否有误
tips = str(plug.getText_byClass(plug.tips))
time.sleep(1)
self.assertEqual(tips, saveSucess, msg='即插即用 开启出错')
print('即插即用 已开启')
# 判断联网 ，不能上网则报错
pingTestIP('www.163.com') # 避免失误
p = pingTestIP('www.163.com')
if p == 'N':
raise Exception('connect failed.')
# 调用bat脚本 地址修改为 192.168.189.39 网关192.168.189.1
os.system('%s' % (batpath + 'changeStaticIP.bat'))
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr = socket.gethostbyname(socket.getfqdn(socket.gethostname()))
print(pcaddr, n)
if str(pcaddr) != '192.168.198.39':
time.sleep(2)
n += 1
else:
print('地址已修改为地址 192.168.198.39', n)
break
else:
raise Exception('地址修改为192.168.198.39 失败')
# 判断联网 ，不能上网则报错
pingTestIP('www.163.com') # 避免失误
p = pingTestIP('www.163.com')
if p == 'N':
raise Exception('connect failed.')
self.driver.quit()
logger.info('test_001_open passed')
def test_001_vlanInterface(self):
u'''VLAN 虚接口'''
vlanPortP = getParameter('vlanPortP')
Support = getExcelValue(vlanPortP)
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_add()
time.sleep(1)
selsxjk = lanpage.selelement_byName(lanpage.selsxjk)
if Support == '√':
try:
self.driver.implicitly_wait(2)
Select(selsxjk).select_by_value('vlanid')
except NoSuchElementException:
CapPic(self.driver)
logger.info(u'软件不支持VLAN 虚接口，与参数表不符')
raise Exception(u'软件不支持VLAN 虚接口，与参数表不符')
else:
logger.info(u'软件支持VLAN 虚接口，与参数表相符')
time.sleep(0.5)
elif Support == '×':
try:
self.driver.implicitly_wait(2)
Select(selsxjk).select_by_value('vlanid')
except NoSuchElementException:
logger.info(u'软件支持VLAN 虚接口，与参数表不符')
else:
CapPic(self.driver)
logger.info(u'软件支持VLAN 虚接口，与参数表不符')
raise Exception(u'软件支持VLAN 虚接口，与参数表不符')
else:
logger.info(u'参数表读取异常')
logger.info(u'参数表读取值为：', Support)
raise Exception(u'参数表读取异常')
Select(selsxjk).select_by_value('default')
time.sleep(0.5)
self.driver.quit()
logger.info('test_001_vlanInterface passed')
def test_003_WEBtimeout(self, timeout='1'): #因为字母顺序问题 该项会在最后执行
u'''修改UI超时时间'''
#修改UI超时时间
accessStrategy = ManagementPolicyPage(self.driver, self.url)
accessStrategy.input_sessionLife(timeout)
accessStrategy.click_save()
self.driver.quit()
login.loginWeb(self)
#任意点击一个页面，这里点击网络配置-内网配置
lanconfig = NetworkConfig_LANpage(self.driver, self.url)
lanconfig.click_NetworkConfig()
time.sleep(0.5)
lanconfig.click_LANconfig()
time.sleep(1)
print('等待超时时间，在这里等待80s')
time.sleep(120)
#等待超时时间后，任意点击其他页面 测试超时（返回登录页面）
accessStrategy = ManagementPolicyPage(self.driver, self.url)
accessStrategy.click_sysConfig()
time.sleep(0.5)
accessStrategy.click_ManagementPolicy()
time.sleep(2)
url = self.driver.current_url
if '/login.html' not in url:
CapPic(self.driver)
logger.info(u"未跳回登录页面")
raise Exception('未跳回登录页面')
self.driver.quit()
# 将超时时间改回默认值
login.loginWeb(self) # admin账号登录
self.driver.implicitly_wait(10)
accessStrategy = ManagementPolicyPage(self.driver, self.url)
# 进入系统配置-网管策略-网管访问策略
accessStrategy.click_sysConfig()
time.sleep(0.5)
accessStrategy.click_ManagementPolicy()
time.sleep(1)
accessStrategy.click_AccessPolicy()
time.sleep(1)
accessStrategy.input_sessionLife('10')
accessStrategy.click_save()
self.driver.quit()
logger.info('test_003_WEBtimeout passed')
def test_002_DNSProxy(self):
u'''DNS Proxy代理、酒店即插即用'''
dhcpserver = DHCPserverpage(self.driver, self.url)
dhcpserver.click_NetworkConfig()
time.sleep(0.5)
dhcpserver.click_DHCPserver()
time.sleep(1)
dhcpserver.click_GlobalConfig()
time.sleep(1)
switch = str(
dhcpserver.getAttribute_byXpath(dhcpserver.dnspEns, 'checked'))
self.assertEqual(switch, 'true', msg='dns代理 默认未开启')
# 酒店即插即用
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_globalconfig()
time.sleep(1)
switch2 = str(
lanpage.getAttribute_byXpath(lanpage.upnpCloseS, 'checked'))
self.assertEqual(switch2, 'true', msg='UPNP 默认开启')
print('DNS Proxy代理、酒店即插即用 验证通过')
# 静态路由
routeconfig = RouteConfigPage(self.driver, self.url)
routeconfig.click_Routeconfig()
time.sleep(1)
routeconfig.click_add()
time.sleep(1)
routeconfig.click_modalhide()
time.sleep(0.5)
# #策略路由
# routeconfig.click_PolicyRoute()
# time.sleep(1)
# routeconfig.click_addPolicy()
# time.sleep(1)
# routeconfig.click_modalhide()
# time.sleep(0.5)
self.driver.quit()
logger.info('test_002_DNSProxy passed')
def test_002_SSIDconfig(self):
u'''网络名称设置&加密方式'''
APnumP = getParameter('APnumP')
Support = getExcelValue(APnumP)
login.loginWeb(self)
self.driver.implicitly_wait(10)
if str(Support).isdigit(): #判断字符串是否为数字
logger.info(u'参数支持AP管理')
wirelessTipsA = getAssertText('wirelessTipsA')
vlanPortP = getParameter('vlanPortP')
Support = getExcelValue(vlanPortP)
if Support == '√': # 支持vlan接口
logger.info(u'参数表支持vlan接口')
# 进入网络配置-内网配置 配置vlan接口
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
#vlan 1000
lanpage.click_add()
time.sleep(1)
lanpage.input_lanIpName('1000')
lanpage.input_lanIp('192.168.10.1')
lanpage.input_lanNetmask('255.255.255.0')
selsxjk = lanpage.selelement_byName(lanpage.selsxjk)
Select(selsxjk).select_by_value('vlanid')
time.sleep(1)
lanpage.input_dhcpVid('1000')
lanpage.click_save()
time.sleep(1)
# vlan 1999
lanpage.click_add()
time.sleep(1)
lanpage.input_lanIpName('1999')
lanpage.input_lanIp('192.168.100.1')
lanpage.input_lanNetmask('255.255.255.0')
selsxjk = lanpage.selelement_byName(lanpage.selsxjk)
Select(selsxjk).select_by_value('vlanid')
time.sleep(1)
lanpage.input_dhcpVid('1999')
lanpage.click_save()
time.sleep(1)
#断言
list_name2 = str(lanpage.getText_byXpath(lanpage.list_name2))
list_name3 = str(lanpage.getText_byXpath(lanpage.list_name3))
list_ip2 = str(lanpage.getText_byXpath(lanpage.list_ip2))
list_ip3 = str(lanpage.getText_byXpath(lanpage.list_ip3))
list_vlanid2 = str(
lanpage.getText_byXpath(lanpage.list_vlanid2))
list_vlanid3 = str(
lanpage.getText_byXpath(lanpage.list_vlanid3))
self.assertEqual(list_name2, '1000', msg='vlan1000名称与设置的不一致')
self.assertEqual(list_name3, '1999', msg='vlan1999名称与设置的不一致')
self.assertEqual(list_ip2,
'192.168.10.1',
msg='vlan1000IP与设置的不一致')
self.assertEqual(list_ip3,
'192.168.100.1',
msg='vlan1000IP与设置的不一致')
self.assertEqual(list_vlanid2,
'1000',
msg='vlan1000 ID与设置的不一致')
self.assertEqual(list_vlanid3,
'1999',
msg='vlan1000 ID与设置的不一致')
#配置dhcp
dhcppage = DHCPserverpage(self.driver, self.url)
#1000
dhcppage.click_DHCPserver()
time.sleep(1)
dhcppage.click_addpool()
time.sleep(1)
dhcppage.input_poolName('1000')
seldhcppool = dhcppage.selelement_byName(dhcppage.poolVid)
Select(seldhcppool).select_by_value('VIF1000')
time.sleep(1)
dhcppage.click_save()
time.sleep(1)
# 1999
dhcppage.click_DHCPserver()
time.sleep(1)
dhcppage.click_addpool()
time.sleep(1)
dhcppage.input_poolName('1999')
seldhcppool = dhcppage.selelement_byName(dhcppage.poolVid)
Select(seldhcppool).select_by_value('VIF1999')
time.sleep(1)
dhcppage.click_save()
time.sleep(1)
# 断言
list_name2 = str(dhcppage.getText_byXpath(dhcppage.list_name2))
list_name3 = str(dhcppage.getText_byXpath(dhcppage.list_name3))
list_int2 = str(dhcppage.getText_byXpath(dhcppage.list_int2))
list_int3 = str(dhcppage.getText_byXpath(dhcppage.list_int3))
self.assertEqual(list_name2, '1000', msg='pool1000名称与设置的不一致')
self.assertEqual(list_name3, '1999', msg='pool1999名称与设置的不一致')
self.assertEqual(list_int2, '1000', msg='pool1000IP与设置的不一致')
self.assertEqual(list_int3, '1999', msg='pool1000IP与设置的不一致')
# 配置网络名称
netname = netNamePage(self.driver, self.url)
try:
self.driver.implicitly_wait(2)
netname.click_wirelessExtension()
time.sleep(0.5)
#网络名称页面的提示
netname.click_netName()
except AttributeError or NoSuchElementException:
CapPic(self.driver)
logger.info(u'软件不支持无线扩展/网络名称，与参数表不符')
raise Exception(u'软件不支持无线扩展/网络名称，与参数表不符')
else:
self.driver.implicitly_wait(10)
time.sleep(1)
checkOpen = str(
netname.getAttribute_byId(netname.checkOpens, 'checktype'))
if checkOpen == '0': # 0为关闭，1打开
tips = netname.getText_byClass(netname.u_cfm_boxT)
time.sleep(1)
self.assertIn(wirelessTipsA, tips, msg='提示信息有误')
netname.click_ok() # 点确认开启
time.sleep(3)
else:
raise Exception('无线扩展默认未关闭')
# 断言 开关打开
checkOpen = str(
netname.getAttribute_byId(netname.checkOpens, 'checktype'))
self.assertEqual(checkOpen, '1', msg='无线扩展默认未关闭') # 0关闭，1打开
# 确认兼容模式按钮默认关闭
ManageProtocols = str(
netname.getAttribute_byId(netname.ManageProtocolss,
'checktype'))
self.assertEqual(ManageProtocols, '0',
msg='兼容模式默认未关闭') # 0关闭，1打开
# 打开兼容模式
netname.click_ManageProtocols()
time.sleep(5)
ManageProtocols = str(
netname.getAttribute_byId(netname.ManageProtocolss,
'checktype'))
self.assertEqual(ManageProtocols, '1',
msg='兼容模式未打开') # 0关闭，1打开
#判断自动下发是否开启
Auto = str(
netname.getAttribute_byXpath(netname.list_autosend1,
'checked'))
self.assertEqual(str(Auto), 'true', msg='默认自动下发未开启')
# 编辑默认ssid
netname.click_list_edit1()
time.sleep(1)
netname.input_ssid('ssid_1中')
netname.click_next_tab()
time.sleep(1)
selencryType = netname.selelement_byName(netname.encryType)
Select(selencryType).select_by_value(
'1') # 0不加密 3 WPA-PSK/WPA2-PSK
time.sleep(0.3)
Select(selencryType).select_by_value('0')
time.sleep(0.3)
Select(selencryType).select_by_value('2')
time.sleep(0.3)
Select(selencryType).select_by_value('3')
time.sleep(0.5)
netname.input_pskPsswd('12345678')
netname.click_next_tab()
time.sleep(0.5)
netname.click_sharelimit() # 共享
netname.input_txBand('1000')
netname.input_rxBand('1000')
netname.click_save()
time.sleep(1)
list_ssid1 = str(netname.getText_byXpath(netname.list_ssid1))
self.assertEqual(list_ssid1, 'ssid_1中', msg='ssid1 与设置不一致')
# 新增2Gssid
netname.click_add()
time.sleep(1)
netname.input_zoneName('2G')
netname.input_ssid('2.4Gz中')
netname.click_cli_5g() # 默认全选，点5G=勾掉，剩下2.4G
if Support == '√': # 支持vlan接口
selvlanId = netname.selelement_byName(
netname.vlanId) # 选vlan接口
Select(selvlanId).select_by_value('1000')
time.sleep(1)
netname.click_gjxx() # 点开高级选项
time.sleep(0.5)
netname.click_broadcastEn() # 隐藏ssid
netname.click_isolateEn() # 无线客户端隔离
time.sleep(0.5)
netname.click_next_tab()
time.sleep(1)
selencryType = netname.selelement_byName(netname.encryType)
Select(selencryType).select_by_value(
'3') # 0不加密 3 WPA-PSK/WPA2-PSK
time.sleep(1)
netname.input_pskPsswd('12345678')
netname.click_next_tab()
time.sleep(0.5)
netname.input_txBand('1000')
netname.input_rxBand('1000')
netname.click_save()
time.sleep(2)
# 断言 开关打开
list_ssid2 = str(netname.getText_byXpath(netname.list_ssid2))
self.assertEqual(list_ssid2, '2.4Gz中', msg='ssid2 与设置不一致')
# 新增5Gssid
netname.click_add()
time.sleep(1)
netname.input_zoneName('5G')
netname.input_ssid('5Gz中')
selSSIDmode = netname.selelement_byName(netname.encodeType)
Select(selSSIDmode).select_by_value('0') #0电脑优先 1手机优先
time.sleep(1)
netname.click_cli_2g() # 默认全选，点2G=勾掉，剩下5G
if Support == '√': # 支持vlan接口
selvlanId = netname.selelement_byName(
netname.vlanId) # 选vlan接口
Select(selvlanId).select_by_value('1999')
time.sleep(1)
netname.click_gjxx() # 点开高级选项
time.sleep(0.5)
netname.click_broadcastEn() # 隐藏ssid
netname.click_isolateEn() # 无线客户端隔离
time.sleep(0.5)
netname.click_next_tab()
time.sleep(1)
selencryType = netname.selelement_byName(netname.encryType)
Select(selencryType).select_by_value(
'3') # 0不加密 3 WPA-PSK/WPA2-PSK
time.sleep(1)
netname.input_pskPsswd('12345678')
netname.click_next_tab()
time.sleep(0.5)
netname.input_txBand('1000')
netname.input_rxBand('1000')
netname.click_save()
time.sleep(1)
list_ssid3 = str(netname.getText_byXpath(netname.list_ssid3))
self.assertEqual(list_ssid3, '5Gz中', msg='ssid3 与设置不一致')
# 新增默认接口ssid
netname.click_add()
time.sleep(1)
netname.input_zoneName('all')
netname.input_ssid('ssid_all中')
netname.click_next_tab()
time.sleep(0.5)
netname.click_next_tab()
time.sleep(0.5)
netname.click_save()
time.sleep(1)
# 断言
list_ssid4 = str(netname.getText_byXpath(netname.list_ssid4))
self.assertEqual(list_ssid4, 'ssid_all中', msg='ssid4 与设置不一致')
#再新建提示保存成功（ssid数量后续版本做了调整）
netname.click_add()
time.sleep(1)
netname.input_zoneName('5')
netname.input_ssid('5')
netname.click_next_tab()
time.sleep(0.5)
netname.click_next_tab()
time.sleep(0.5)
netname.click_save()
time.sleep(1)
# 断言 开关打开
list_ssid5 = str(netname.getText_byXpath(netname.list_ssid5))
self.assertEqual(list_ssid5, '5', msg='ssid5 与设置不一致')
print('网络名称设置 验证通过')
#删除ssid
netname.click_selall()
time.sleep(0.2)
netname.click_sellist1()
time.sleep(0.2)
netname.click_delete()
time.sleep(2)
netname.click_ok()
time.sleep(1)
if Support == '√': # 支持vlan接口
# 删除dhcp
dhcppage = DHCPserverpage(self.driver, self.url)
dhcppage.click_NetworkConfig()
time.sleep(0.5)
dhcppage.click_DHCPserver()
time.sleep(0.5)
dhcppage.click_DHCPserver()
time.sleep(1)
dhcppage.click_list_delpool2()
time.sleep(1)
dhcppage.click_ok()
time.sleep(1)
dhcppage.click_list_delpool2()
time.sleep(1)
dhcppage.click_ok()
time.sleep(1)
# 删除vlan接口
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_allsel()
time.sleep(1)
lanpage.click_delete()
time.sleep(1)
lanpage.click_ok()
time.sleep(1)
else:
logger.info(u'参数不支持AP管理')
try:
netname = netNamePage(self.driver, self.url)
self.driver.implicitly_wait(2)
netname.click_wirelessExtension()
time.sleep(0.5)
netname.click_netName()
time.sleep(1)
except AttributeError or NoSuchElementException:
logger.info(u'软件不支持无线扩展，与参数表相符')
else:
CapPic(self.driver)
logger.info(u'软件支持无线扩展，与参数表不符')
raise Exception(u'软件支持无线扩展，与参数表不符')
self.driver.quit()
logger.info('test_002_SSIDconfig passed')
def test_001_wifi2(self):
u'''2.4G无线加密、限速、无线vlan'''
#lan
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_add()
lanpage.input_lanIpName('wifi1')
lanpage.input_lanIp('213.1.10.1')
selsxjk = lanpage.selelement_byName(lanpage.selsxjk)
Select(selsxjk).select_by_value('wifi')
lanpage.click_wifiInter1()
lanpage.click_save()
time.sleep(2)
list_name2 = (lanpage.getText_byXpath(lanpage.list_name2))
list_ip2 = (lanpage.getText_byXpath(lanpage.list_ip2))
self.assertEqual(list_name2, 'wifi1', msg='wifi1名称与设置的不一致')
self.assertEqual(list_ip2, '213.1.10.1', msg='wifi1 IP与设置的不一致')
# dhcp
dhcpserver = DHCPserverpage(self.driver, self.url)
dhcpserver.click_DHCPserver()
time.sleep(1)
dhcpserver.click_addpool()
time.sleep(1)
dhcpserver.input_poolName('wifi1')
selpoolVid = dhcpserver.selelement_byName(dhcpserver.poolVid)
Select(selpoolVid).select_by_value('wifi1')
time.sleep(1)
dhcpserver.click_save()
time.sleep(2)
list_name2 = dhcpserver.getText_byXpath(dhcpserver.list_name2)
list_int2 = dhcpserver.getText_byXpath(dhcpserver.list_int2)
self.assertEqual(list_name2, 'wifi1', msg='wifi1名称与设置的不一致')
self.assertEqual(list_int2, 'wifi1', msg='wifi1 IP与设置的不一致')
wifi = BasicConfigPage(self.driver, self.url)
wifi.click_wifiConfig()
time.sleep(0.5)
wifi.click_BasicConfig()
time.sleep(1)
wifi.click_list_edit1()
time.sleep(1)
wifi.input_ssid1('test3_2.41')
ifName = wifi.selelement_byName(wifi.ifName)
Select(ifName).select_by_value('wifi1')
wifi.click_securitySet()
time.sleep(1)
secMode1 = wifi.selelement_byName(wifi.secMode1)
Select(secMode1).select_by_value('WPAPSK')
time.sleep(0.5)
wifi.input_pskPsswd1('123456789')
wifi.click_Bandwidthset()
time.sleep(1)
wifi.input_txBand1('1000')
wifi.input_rxBand1('1000')
wifi.click_save()
time.sleep(1)
lsit_ssid1 = wifi.getText_byXpath(wifi.list_ssid1)
self.assertEqual(lsit_ssid1, 'test3_2.41', msg='2.4G SSID保存异常')
list_wifiInter1 = wifi.getText_byXpath(wifi.list_wifiInter1)
self.assertEqual(list_wifiInter1, 'wifi1', msg='2.4G wifi接口保存异常')
list_speed1 = wifi.getText_byXpath(wifi.list_speed1)
self.assertEqual(list_speed1, '1000/1000', msg='2.4G SSID保存异常')
list_wifipwd1 = wifi.getAttribute_byXpath(wifi.list_wifipwd1,
'data-local')
self.assertEqual(list_wifipwd1, '123456789', msg='2.4G密码保存异常')
time.sleep(13)
tn = telnetlib.Telnet(host=host, port=port) #telnet验证
tn.set_debuglevel(5)
tn.read_until(b'login:'******'Password:'******'#')
if cpumodel == "MTK":
tn.write(
b'cat /etc/Wireless/RT2860/RT2860.dat | grep -E "SSID1|WPAPSK1"'
+ b'\n')
elif cpumodel == "Qualcomm":
tn.write(
b'cat /etc/Wireless/wifi0/qca_ath0.dat | grep -E "ssid|key"' +
b'\n')
# 输出结果，判断
time.sleep(1)
result = str(tn.read_very_eager()) # 只会存最后一条命令的结果
print('-------------------输出结果------------------------')
# 命令执行结果
print('result:', result)
# 判断
if cpumodel == "MTK":
if "SSID1=test3_2.41" in result:
print('2.4G SSID配置正常')
else:
raise Exception('2.4G SSID配置异常')
if "WPAPSK1=123456789" in result:
print('2.4G 密码配置正常')
else:
raise Exception('2.4G 密码配置异常')
elif cpumodel == "Qualcomm":
if "ssid=test3_2.41" in result:
print('2.4G SSID配置正常')
else:
raise Exception('2.4G SSID配置异常')
if "key=123456789" in result:
print('2.4G 密码配置正常')
else:
raise Exception('2.4G 密码配置异常')
tn.close() # tn.write('exit\n')
logger.info('test_001_wifi2 passed')
def test_002_portRateLAN(self):
u'''lan默认协商速率及端口速率修改'''
# 进入-系统监控-系统状态 获取型号判断是否支持千M
sysmonitor = sysStaticPage(self.driver, self.url)
sysmonitor.click_systemWatch()
time.sleep(0.5)
sysmonitor.click_sysStatic()
time.sleep(1)
Model = str(sysmonitor.getText_byXpath(sysmonitor.Model))
print(Model)
# 协商速率LAN口
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_globalconfig()
time.sleep(1)
LanMode_seled1 = lanpage.getAttribute_byXpath(lanpage.lanRateseled,
'value')
self.assertEqual(str(LanMode_seled1), '3', msg='LAN默认端口速率不为自动协商')
LanMode_seled2 = lanpage.getAttribute_byXpath(lanpage.lanRateseled,
'selected')
self.assertEqual(str(LanMode_seled2), 'true', msg='LAN默认端口速率不为自动协商')
LanMode = lanpage.selelement_byXpath(lanpage.sellanRate)
time.sleep(1)
# 0-10M全双工 1-100M全双工 2-1000M全双工 3-自动 4-10M半双工 5-100M半双工
Select(LanMode).select_by_value('0')
time.sleep(1)
Select(LanMode).select_by_value('1')
Select(LanMode).select_by_value('3')
Select(LanMode).select_by_value('4')
Select(LanMode).select_by_value('5')
if 'G' in str(Model) or 'g' in str(Model):
try:
Select(LanMode).select_by_value('2')
except NoSuchElementException:
raise Exception('LAN口不支持千M协商速率')
self.driver.quit()
logger.info('test_002_portRateLAN passed')
def test_004_changeMAC(self):
u'''MAC地址修改'''
CannotbeblankA = getAssertText('CannotbeblankA')
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_globalconfig()
time.sleep(1)
# lan口MAC 清空lan mac的值保存 确认是否可以修改
lanpage.clear_mac()
time.sleep(0.5)
lanpage.click_save()
time.sleep(0.5)
lan_tips = str(lanpage.getText_byXpath(lanpage.lan_tips))
self.assertIn(CannotbeblankA, lan_tips, msg='lan口mac地址清空保存提示错误')
print('lan口mac地址更改 验证通过')
# wan1口MAC 清空lan mac的值保存 确认是否可以修改
wanpage = NetworkConfig_wanpage(self.driver, self.url)
wanpage.click_WANconfig()
time.sleep(1)
wanpage.click_line1edit()
time.sleep(1)
connectionType = wanpage.selelement_byName(wanpage.connectionType)
Select(connectionType).select_by_value('DHCP')
time.sleep(0.5)
wanpage.clear_line1editmac()
time.sleep(0.5)
wanpage.click_save()
time.sleep(0.5)
wan_tips = str(wanpage.getText_byXpath(wanpage.wan_tips))
self.assertIn(CannotbeblankA, lan_tips, msg='wan口mac地址清空保存提示错误')
print('wan口mac地址更改 验证通过')
self.driver.quit()
logger.info('test_004_changeMAC passed')
def test_003_LanMultiIP(self):
u'''Lan口多IP'''
reachMax3A = getAssertText('reachMax3A')
User = getweb('User')
Passwd = getweb('Passwd')
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
# 新增lan口
num = 1
while num < 5:
num += 1
lanpage.click_add()
time.sleep(1)
lanpage.input_lanIpName('lan%s' % num)
lanpage.input_lanIp('213.18.%s.1' % num)
lanpage.click_save()
if num < 5:
time.sleep(5)
i = 0
while i < 10:
now_url = str(self.driver.current_url)
if '/noAuth/login.html' not in now_url:
time.sleep(2)
else:
break
i += 1
print(now_url, i)
self.driver.quit()
login.loginWeb(self)
self.driver.implicitly_wait(10)
loginPage = LoginPage(self.driver, self.url)
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
elif num >= 5:
time.sleep(1)
tips = (lanpage.getText_byClass(lanpage.tipsshowin))
self.assertIn(reachMax3A, tips, msg='提示信息有误')
print('lan口数量最大为4 验证通过')
time.sleep(1)
lanpage.click_modalhide()
time.sleep(0.5)
lanpage.click_allsel()
time.sleep(0.2)
lanpage.click_delete()
time.sleep(1)
lanpage.click_ok()
time.sleep(15) #删除接口要等等
self.driver.quit()
logger.info('test_003_LanMultiIP passed')
def test_002_close(self):
u'''关闭即插即用 错误的IP，无法上网'''
plug = NetworkConfig_LANpage(self.driver, self.url)
saveSucess = getAssertText('saveSucess')
# 关闭UPNP
plug.click_upnpClose()
time.sleep(0.5)
plug.click_save()
time.sleep(1)
# 断言 开启提示信息是否有误
tips = str(plug.getText_byClass(plug.tips))
time.sleep(1)
self.assertEqual(tips, saveSucess, msg='即插即用 开启出错')
print('即插即用 已关闭')
#判断联网 ,关闭即插即用后 错误IP用户应该不能上网
pcaddr = socket.gethostbyname(socket.getfqdn(socket.gethostname()))
if pcaddr != '192.168.189.39':
# 调用bat脚本 地址修改为 192.168.189.39 网关192.168.198.1
os.system('%s' % (batpath + 'changeStaticIP.bat'))
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr = socket.gethostbyname(
socket.getfqdn(socket.gethostname()))
print(pcaddr, n)
if str(pcaddr) != '192.168.198.39':
time.sleep(2)
n += 1
else:
print('地址已修改为地址 192.168.198.39', n)
break
else:
raise Exception('地址修改为192.168.198.39 失败')
time.sleep(3)
pingTestIP('114.114.114.114') #避免失误
pingTestIP() #避免失误
p = pingTestIP('114.114.114.114')
if p == 'Y':
raise Exception('错误IP用户依旧可以上网')
p = pingTestIP()
if p == 'Y':
raise Exception('错误IP用户依旧可以访问路由器')
time.sleep(1)
#将IP改回自动获取
os.system('%s' % batpath + 'changeDhcpIp.bat')
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr1 = socket.gethostbyname(socket.getfqdn(
socket.gethostname()))
print(pcaddr1, n)
if '192.168.' not in str(pcaddr1):
time.sleep(2)
n += 1
else:
print('IP地址已自动获取成功', n)
break
else:
raise Exception('未获取到地址')
# 判断联网 ，不能上网则报错
pingTestIP('www.163.com') # 避免失误
p = pingTestIP('www.163.com')
if p == 'N':
raise Exception('connect failed.')
self.driver.quit()
logger.info('test_002_close passed')
def tearDown(self):
#修改lan口为自动模式，谨防lan口速率出问题 太卡
login.loginWeb(self) # admin账号登录
self.driver.implicitly_wait(10)
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_globalconfig()
time.sleep(1)
lanmodenow = lanpage.getAttribute_byXpath(lanpage.lanmodenow,
'selected')
print(lanmodenow)
if lanmodenow != 'true':
LanMode = lanpage.selelement_byXpath(lanpage.sellanRate)
Select(LanMode).select_by_value('3')
time.sleep(0.5)
lanpage.click_save()
time.sleep(10)
n = 0
while n < 20:
ping = pingTestIP()
if ping != 'Y':
time.sleep(1)
n += 1
else:
break
self.driver.quit()
logger.info('tearDown over')
logger.info('%s' % ('=' * 50))
def test_002_changeRateLAN(self):
u'''lan1端口协商速率修改 '''
# # 进入-系统监控-系统状态 获取型号判断是否支持千M
# sysmonitor = sysStaticPage(self.driver, self.url)
# sysmonitor.click_systemWatch()
# time.sleep(0.5)
# sysmonitor.click_sysStatic()
# time.sleep(1)
# Model = str(sysmonitor.getText_byXpath(sysmonitor.Model))
# print(Model)
#Lan口速率修改
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_globalconfig()
time.sleep(1)
LanMode = lanpage.selelement_byXpath(lanpage.sellanRate)
# 0-10M全双工 1-100M全双工 2-1000M全双工 3-自动 4-10M半双工 5-100M半双工
#改为10M
try:
Select(LanMode).select_by_value('0')
time.sleep(0.5)
except ElementNotVisibleException:
CapPic(self.driver)
logger.info(u'lan口不支持修改为10M全双工')
raise Exception(u'lan口不支持修改为10M全双工')
lanpage.click_save()
time.sleep(10)
n = 0
while n < 20:
ping = pingTestIP()
if ping != 'Y':
time.sleep(1)
n += 1
else:
break
self.driver.quit()
i = 0
while i < 30:
swRate = swconfig.test_getLANSpeed(self)
print(swRate)
if swRate != 'speed10M':
time.sleep(1)
i += 1
else:
break
else:
logger.info(u'交换机端口速率为: %s' % swRate)
logger.info(u'交换机协商速率 不为10M')
raise Exception(u'交换机协商速率 不为10M')
# 改为100M
login.loginWeb(self) # admin账号登录
self.driver.implicitly_wait(10)
time.sleep(2) #谨防10M页面卡住
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_globalconfig()
time.sleep(1)
LanMode = lanpage.selelement_byXpath(lanpage.sellanRate)
Select(LanMode).select_by_value('1')
time.sleep(0.5)
lanpage.click_save()
time.sleep(10)
n = 0
while n < 20:
ping = pingTestIP()
if ping != 'Y':
time.sleep(1)
n += 1
else:
break
self.driver.quit()
i = 0
while i < 30:
swRate = swconfig.test_getLANSpeed(self)
print(swRate)
if swRate != 'speed100M':
time.sleep(1)
i += 1
else:
break
else:
logger.info(u'交换机端口速率为: %s' % swRate)
logger.info(u'交换机协商速率 不为100M')
raise Exception(u'交换机协商速率 不为100M')
# 改为1000M
support = getExcelValue(portTateLANp)
# print('support:',support)
if '千' in str(support):
login.loginWeb(self) # admin账号登录
self.driver.implicitly_wait(10)
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_globalconfig()
time.sleep(1)
LanMode = lanpage.selelement_byXpath(lanpage.sellanRate)
try:
Select(LanMode).select_by_value('2')
time.sleep(0.5)
lanpage.click_save()
time.sleep(10)
n = 0
while n < 20:
ping = pingTestIP()
if ping != 'Y':
time.sleep(1)
n += 1
else:
break
self.driver.quit()
i = 0
while i < 30:
swRate = swconfig.test_getWAN1Speed(self)
print(swRate)
if swRate != 'speed1000M':
time.sleep(1)
i += 1
else:
break
else:
logger.info(u'交换机端口速率为: %s' % swRate)
logger.info(u'交换机协商速率 不为1000M')
raise Exception(u'交换机协商速率 不为1000M')
except NoSuchElementException:
raise Exception('WAN口不支持千M协商速率')
# 改为auto
login.loginWeb(self)
self.driver.implicitly_wait(10)
lanpage = NetworkConfig_LANpage(self.driver, self.url)
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
lanpage.click_globalconfig()
time.sleep(1)
LanMode = lanpage.selelement_byXpath(lanpage.sellanRate)
Select(LanMode).select_by_value('3')
time.sleep(0.5)
lanpage.click_save()
time.sleep(10)
n = 0
while n < 20:
ping = pingTestIP()
if ping != 'Y':
time.sleep(1)
n += 1
else:
break
self.driver.quit()
swRate = swconfig.test_getWAN1Speed(self)
print(swRate)
if '千' in str(support):
i = 0
while i < 30:
swRate = swconfig.test_getWAN1Speed(self)
print(swRate)
if swRate != 'speed1000M':
time.sleep(1)
i += 1
else:
break
else:
logger.info(u'交换机端口速率为: %s' % swRate)
logger.info(u'交换机协商速率 不为1000M')
raise Exception(u'交换机协商速率 不为1000M')
else:
i = 0
while i < 30:
swRate = swconfig.test_getLANSpeed(self)
print(swRate)
if swRate != 'speed100M':
time.sleep(1)
i += 1
else:
break
else:
logger.info(u'交换机端口速率为: %s' % swRate)
logger.info(u'交换机协商速率 不为100M')
raise Exception(u'交换机协商速率 不为100M')
logger.info('test_002_changePortRateLAN passed')
def test_001_ssidNum(self):
u'''网络名称添加'''
vlanPortP = getParameter('vlanPortP')
Support = getExcelValue(vlanPortP)
if Support == '√': #支持vlan接口
logger.info(u'参数表支持vlan接口')
lanpage = NetworkConfig_LANpage(self.driver,self.url)
# 进入网络配置-外网配置 配置vlan接口
lanpage.click_NetworkConfig()
time.sleep(0.5)
lanpage.click_LANconfig()
time.sleep(1)
#vlan 1000
lanpage.click_add()
time.sleep(1)
lanpage.input_lanIpName('1000')
lanpage.input_lanIp('192.168.10.1')
lanpage.input_lanNetmask('255.255.255.0')
selsxjk = lanpage.selelement_byName(lanpage.selsxjk)
Select(selsxjk).select_by_value('vlanid')
time.sleep(1)
lanpage.input_dhcpVid('1000')
lanpage.click_save()
time.sleep(1)
# vlan 1999
lanpage.click_add()
time.sleep(1)
lanpage.input_lanIpName('1999')
lanpage.input_lanIp('192.168.100.1')
lanpage.input_lanNetmask('255.255.255.0')
selsxjk = lanpage.selelement_byName(lanpage.selsxjk)
Select(selsxjk).select_by_value('vlanid')
time.sleep(1)
lanpage.input_dhcpVid('1999')
lanpage.click_save()
time.sleep(1)
#断言
list_name2 = (lanpage.getText_byXpath(lanpage.list_name2))
list_name3 = (lanpage.getText_byXpath(lanpage.list_name3))
list_ip2 = (lanpage.getText_byXpath(lanpage.list_ip2))
list_ip3 = (lanpage.getText_byXpath(lanpage.list_ip3))
list_vlanid2 = (lanpage.getText_byXpath(lanpage.list_vlanid2))
list_vlanid3 = (lanpage.getText_byXpath(lanpage.list_vlanid3))
self.assertEqual(list_name2, '1000', msg='vlan1000名称与设置的不一致')
self.assertEqual(list_name3, '1999', msg='vlan1999名称与设置的不一致')
self.assertEqual(list_ip2, '192.168.10.1', msg='vlan1000IP与设置的不一致')
self.assertEqual(list_ip3, '192.168.100.1', msg='vlan1000IP与设置的不一致')
self.assertEqual(list_vlanid2, '1000', msg='vlan1000 ID与设置的不一致')
self.assertEqual(list_vlanid3, '1999', msg='vlan1000 ID与设置的不一致')
#配置dhcp
dhcpserver = DHCPserverpage(self.driver,self.url)
#1000
dhcpserver.click_DHCPserver()
time.sleep(1)
dhcpserver.click_addpool()
time.sleep(1)
dhcpserver.input_poolName('1000')
selpoolVid = dhcpserver.selelement_byName(dhcpserver.poolVid)
Select(selpoolVid).select_by_value('VIF1000')
time.sleep(1)
dhcpserver.click_save()
time.sleep(2)
# 1999
dhcpserver.click_addpool()
time.sleep(1)
dhcpserver.input_poolName('1999')
selpoolVid = dhcpserver.selelement_byName(dhcpserver.poolVid)
Select(selpoolVid).select_by_value('VIF1999')
time.sleep(1)
dhcpserver.click_save()
time.sleep(1)
# 断言
list_name2 = dhcpserver.getText_byXpath(dhcpserver.list_name2)
list_name3 = dhcpserver.getText_byXpath(dhcpserver.list_name3)
list_int2 = dhcpserver.getText_byXpath(dhcpserver.list_int2)
list_int3 = dhcpserver.getText_byXpath(dhcpserver.list_int3)
self.assertEqual(list_name2, '1000', msg='pool1000名称与设置的不一致')
self.assertEqual(list_name3, '1999', msg='pool1999名称与设置的不一致')
self.assertEqual(list_int2, '1000', msg='pool1000IP与设置的不一致')
self.assertEqual(list_int3, '1999', msg='pool1000IP与设置的不一致')
# 配置网络名称
netname = netNamePage(self.driver,self.url)
netname.click_wirelessExtension()
time.sleep(0.5)
netname.click_netName()
time.sleep(1)
checkOpen = str(netname.getAttribute_byId(netname.checkOpens,'checktype'))
if checkOpen == '0' : # 0为关闭，1打开
time.sleep(1)
netname.click_ok() # 点确认开启
time.sleep(1)
checkOpen = str(netname.getAttribute_byId(netname.checkOpens, 'checktype'))
self.assertEqual(checkOpen, '1', msg='无线扩展默认未关闭') # 0关闭，1打开
# 编辑默认ssid
netname.click_list_edit1()
time.sleep(1)
netname.input_ssid('ssid_1中')
netname.click_next_tab()
time.sleep(1)
selencryType= netname.selelement_byName(netname.encryType)
Select(selencryType).select_by_value('3') # 0不加密 3 WPA-PSK/WPA2-PSK
time.sleep(1)
netname.input_pskPsswd('12345678')
netname.click_next_tab()
time.sleep(0.5)
netname.input_txBand('1000')
netname.input_rxBand('1000')
netname.click_save()
time.sleep(1)
# 断言 开关打开
list_ssid1 = str(netname.getText_byXpath(netname.list_ssid1))
self.assertEqual(list_ssid1, 'ssid_1中', msg='ssid1 与设置不一致')
# 新增2Gssid
netname.click_add()
time.sleep(1)
netname.input_zoneName('2G')
netname.input_ssid('2.4Gz中')
netname.click_cli_5g()#默认全选，点5G=勾掉，剩下2.4G
if Support == '√': # 支持vlan接口
selvlanId = netname.selelement_byName(netname.vlanId)# 选vlan接口
Select(selvlanId).select_by_value('1000')
time.sleep(1)
netname.click_gjxx() #点开高级选项
time.sleep(0.5)
netname.click_broadcastEn() #隐藏ssid
netname.click_isolateEn() #无线客户端隔离
time.sleep(0.5)
netname.click_next_tab()
time.sleep(1)
selencryType = netname.selelement_byName(netname.encryType)
Select(selencryType).select_by_value('3') # 0不加密 3 WPA-PSK/WPA2-PSK
time.sleep(1)
netname.input_pskPsswd('12345678')
netname.click_next_tab()
time.sleep(0.5)
netname.input_txBand('1000')
netname.input_rxBand('1000')
netname.click_save()
time.sleep(1)
# 断言 开关打开
list_ssid2 = str(netname.getText_byXpath(netname.list_ssid2))
self.assertEqual(list_ssid2, '2.4Gz中', msg='ssid2 与设置不一致')
# 新增5Gssid
netname.click_add()
time.sleep(1)
netname.input_zoneName('5G')
netname.input_ssid('5Gz中')
netname.click_cli_2g() # 默认全选，点2G=勾掉，剩下5G
if Support == '√': # 支持vlan接口
selvlanId = netname.selelement_byName(netname.vlanId) # 选vlan接口
Select(selvlanId).select_by_value('1999')
time.sleep(1)
netname.click_gjxx() # 点开高级选项
time.sleep(0.5)
netname.click_broadcastEn() # 隐藏ssid
netname.click_isolateEn() # 无线客户端隔离
time.sleep(0.5)
netname.click_next_tab()
time.sleep(1)
selencryType = netname.selelement_byName(netname.encryType)
Select(selencryType).select_by_value('3') # 0不加密 3 WPA-PSK/WPA2-PSK
time.sleep(1)
netname.input_pskPsswd('12345678')
netname.click_next_tab()
time.sleep(0.5)
netname.click_sharelimit()#共享
netname.input_txBand('1000')
netname.input_rxBand('1000')
netname.click_save()
time.sleep(1)
# 断言 开关打开
list_ssid3 = str(netname.getText_byXpath(netname.list_ssid3))
self.assertEqual(list_ssid3, '5Gz中', msg='ssid3 与设置不一致')
# 新增默认接口ssid
netname.click_add()
time.sleep(1)
netname.input_zoneName('all')
netname.input_ssid('ssid_all中')
netname.click_next_tab()
time.sleep(0.5)
netname.click_next_tab()
time.sleep(0.5)
netname.click_save()
time.sleep(1)
# 断言
list_ssid4 = str(netname.getText_byXpath(netname.list_ssid4))
self.assertEqual(list_ssid4, 'ssid_all中', msg='ssid4 与设置不一致')
self.driver.quit()
logger.info('test_001_ssidNum passed')