def _parse_userauth_request(self, m):
if not self.transport.server_mode:
# er, uh... what?
m = Message()
m.add_byte(chr(MSG_USERAUTH_FAILURE))
m.add_string('none')
m.add_boolean(0)
self.transport._send_message(m)
return
if self.authenticated:
# ignore
return
username = m.get_string()
service = m.get_string()
method = m.get_string()
self.transport._log(DEBUG, 'Auth request (type=%s) service=%s, username=%s' % (method, service, username))
if service != 'ssh-connection':
self._disconnect_service_not_available()
return
if (self.auth_username is not None) and (self.auth_username != username):
self.transport._log(WARNING, 'Auth rejected because the client attempted to change username in mid-flight')
self._disconnect_no_more_auth()
return
self.auth_username = username
if method == 'none':
result = self.transport.server_object.check_auth_none(username)
elif method == 'password':
changereq = m.get_boolean()
password = m.get_string()
try:
password = password.decode('UTF-8')
except UnicodeError:
# some clients/servers expect non-utf-8 passwords!
# in this case, just return the raw byte string.
pass
if changereq:
# always treated as failure, since we don't support changing passwords, but collect
# the list of valid auth types from the callback anyway
self.transport._log(DEBUG, 'Auth request to change passwords (rejected)')
newpassword = m.get_string()
try:
newpassword = newpassword.decode('UTF-8', 'replace')
except UnicodeError:
pass
result = AUTH_FAILED
else:
result = self.transport.server_object.check_auth_password(username, password)
elif method == 'publickey':
sig_attached = m.get_boolean()
keytype = m.get_string()
keyblob = m.get_string()
try:
key = self.transport._key_info[keytype](Message(keyblob))
except SSHException, e:
self.transport._log(INFO, 'Auth rejected: public key: %s' % str(e))
key = None
except:
def _parse_userauth_request(self, m):
if not self.transport.server_mode:
# er, uh... what?
m = Message()
m.add_byte(chr(MSG_USERAUTH_FAILURE))
m.add_string('none')
m.add_boolean(0)
self.transport._send_message(m)
return
if self.authenticated:
# ignore
return
username = m.get_string()
service = m.get_string()
method = m.get_string()
self.transport._log(DEBUG, 'Auth request (type=%s) service=%s, username=%s' % (method, service, username))
if service != 'ssh-connection':
self._disconnect_service_not_available()
return
if (self.auth_username is not None) and (self.auth_username != username):
self.transport._log(WARNING, 'Auth rejected because the client attempted to change username in mid-flight')
self._disconnect_no_more_auth()
return
self.auth_username = username
if method == 'none':
result = self.transport.server_object.check_auth_none(username)
elif method == 'password':
changereq = m.get_boolean()
password = m.get_string()
try:
password = password.decode('UTF-8')
except UnicodeError:
# some clients/servers expect non-utf-8 passwords!
# in this case, just return the raw byte string.
pass
if changereq:
# always treated as failure, since we don't support changing passwords, but collect
# the list of valid auth types from the callback anyway
self.transport._log(DEBUG, 'Auth request to change passwords (rejected)')
newpassword = m.get_string()
try:
newpassword = newpassword.decode('UTF-8', 'replace')
except UnicodeError:
pass
result = AUTH_FAILED
else:
result = self.transport.server_object.check_auth_password(username, password)
elif method == 'publickey':
sig_attached = m.get_boolean()
keytype = m.get_string()
keyblob = m.get_string()
try:
key = self.transport._key_info[keytype](Message(keyblob))
except SSHException, e:
self.transport._log(INFO, 'Auth rejected: public key: %s' % str(e))
key = None
except:
def test_misc(self):
msg = Message(self.__d)
self.assertEqual(msg.get_int(), 5)
self.assertEqual(msg.get_boolean(), True)
self.assertEqual(msg.get_text(), 'cat')
self.assertEqual(msg.get_so_far(), self.__d[:12])
self.assertEqual(msg.get_remainder(), self.__d[12:])
def __init__(self, session: 'ssh_proxy_server.session.Session', m: Message) -> None:
self.session = session
self.client_version = session.transport.remote_version
self.cookie = m.get_bytes(16) # cookie (random bytes)
self.kex_algorithms = m.get_list() # kex_algorithms
self.server_host_key_algorithms = m.get_list()
self.encryption_algorithms_client_to_server = m.get_list()
self.encryption_algorithms_server_to_client = m.get_list()
self.mac_algorithms_client_to_server = m.get_list()
self.mac_algorithms_server_to_client = m.get_list()
self.compression_algorithms_client_to_server = m.get_list()
self.compression_algorithms_server_to_client = m.get_list()
self.languages_client_to_server = m.get_list()
self.languages_server_to_client = m.get_list()
self.first_kex_packet_follows = m.get_boolean()
m.rewind()
def test_2_decode(self):
msg = Message(self.__a)
self.assertEquals(msg.get_int(), 23)
self.assertEquals(msg.get_int(), 123789456)
self.assertEquals(msg.get_string(), 'q')
self.assertEquals(msg.get_string(), 'hello')
self.assertEquals(msg.get_string(), 'x' * 1000)
msg = Message(self.__b)
self.assertEquals(msg.get_boolean(), True)
self.assertEquals(msg.get_boolean(), False)
self.assertEquals(msg.get_byte(), '\xf3')
self.assertEquals(msg.get_bytes(2), '\x00\x3f')
self.assertEquals(msg.get_list(), ['huey', 'dewey', 'louie'])
msg = Message(self.__c)
self.assertEquals(msg.get_int64(), 5)
self.assertEquals(msg.get_int64(), 0xf5e4d3c2b109L)
self.assertEquals(msg.get_mpint(), 17)
self.assertEquals(msg.get_mpint(), 0xf5e4d3c2b109L)
self.assertEquals(msg.get_mpint(), -0x65e4d3c2b109L)
def test_2_decode(self):
msg = Message(self.__a)
self.assertEqual(msg.get_int(), 23)
self.assertEqual(msg.get_int(), 123789456)
self.assertEqual(msg.get_text(), "q")
self.assertEqual(msg.get_text(), "hello")
self.assertEqual(msg.get_text(), "x" * 1000)
msg = Message(self.__b)
self.assertEqual(msg.get_boolean(), True)
self.assertEqual(msg.get_boolean(), False)
self.assertEqual(msg.get_byte(), byte_chr(0xf3))
self.assertEqual(msg.get_bytes(2), zero_byte + byte_chr(0x3f))
self.assertEqual(msg.get_list(), ["huey", "dewey", "louie"])
msg = Message(self.__c)
self.assertEqual(msg.get_int64(), 5)
self.assertEqual(msg.get_int64(), 0xf5e4d3c2b109)
self.assertEqual(msg.get_mpint(), 17)
self.assertEqual(msg.get_mpint(), 0xf5e4d3c2b109)
self.assertEqual(msg.get_mpint(), -0x65e4d3c2b109)
def test_decode(self):
msg = Message(self.__a)
self.assertEqual(msg.get_int(), 23)
self.assertEqual(msg.get_int(), 123789456)
self.assertEqual(msg.get_text(), 'q')
self.assertEqual(msg.get_text(), 'hello')
self.assertEqual(msg.get_text(), 'x' * 1000)
msg = Message(self.__b)
self.assertEqual(msg.get_boolean(), True)
self.assertEqual(msg.get_boolean(), False)
self.assertEqual(msg.get_byte(), byte_chr(0xf3))
self.assertEqual(msg.get_bytes(2), zero_byte + byte_chr(0x3f))
self.assertEqual(msg.get_list(), ['huey', 'dewey', 'louie'])
msg = Message(self.__c)
self.assertEqual(msg.get_int64(), 5)
self.assertEqual(msg.get_int64(), 0xf5e4d3c2b109)
self.assertEqual(msg.get_mpint(), 17)
self.assertEqual(msg.get_mpint(), 0xf5e4d3c2b109)
self.assertEqual(msg.get_mpint(), -0x65e4d3c2b109)
def test_2_decode(self):
msg = Message(self.__a)
self.assertEqual(msg.get_int(), 23)
self.assertEqual(msg.get_int(), 123789456)
self.assertEqual(msg.get_text(), 'q')
self.assertEqual(msg.get_text(), 'hello')
self.assertEqual(msg.get_text(), 'x' * 1000)
msg = Message(self.__b)
self.assertEqual(msg.get_boolean(), True)
self.assertEqual(msg.get_boolean(), False)
self.assertEqual(msg.get_byte(), byte_chr(0xf3))
self.assertEqual(msg.get_bytes(2), zero_byte + byte_chr(0x3f))
self.assertEqual(msg.get_list(), ['huey', 'dewey', 'louie'])
msg = Message(self.__c)
self.assertEqual(msg.get_int64(), 5)
self.assertEqual(msg.get_int64(), 0xf5e4d3c2b109)
self.assertEqual(msg.get_mpint(), 17)
self.assertEqual(msg.get_mpint(), 0xf5e4d3c2b109)
self.assertEqual(msg.get_mpint(), -0x65e4d3c2b109)
def test_2_decode(self):
msg = Message(self.__a)
self.assertEquals(msg.get_int(), 23)
self.assertEquals(msg.get_int(), 123789456)
self.assertEquals(msg.get_string(), b'q')
self.assertEquals(msg.get_string(), b'hello')
self.assertEquals(msg.get_string(), b'x' * 1000)
msg = Message(self.__b)
self.assertEquals(msg.get_boolean(), True)
self.assertEquals(msg.get_boolean(), False)
self.assertEquals(msg.get_byte(), b'\xf3')
self.assertEquals(msg.get_bytes(2), b'\x00\x3f')
self.assertEquals(msg.get_list(), [b'huey', b'dewey', b'louie'])
msg = Message(self.__c)
self.assertEquals(msg.get_int64(), 5)
self.assertEquals(msg.get_int64(), 0xf5e4d3c2b109)
self.assertEquals(msg.get_mpint(), 17)
self.assertEquals(msg.get_mpint(), 0xf5e4d3c2b109)
self.assertEquals(msg.get_mpint(), -0x65e4d3c2b109)
def test_2_decode(self):
msg = Message(self.__a)
self.assertEquals(msg.get_int(), 23)
self.assertEquals(msg.get_int(), 123789456)
self.assertEquals(msg.get_string(), "q")
self.assertEquals(msg.get_string(), "hello")
self.assertEquals(msg.get_string(), "x" * 1000)
msg = Message(self.__b)
self.assertEquals(msg.get_boolean(), True)
self.assertEquals(msg.get_boolean(), False)
self.assertEquals(msg.get_byte(), "\xf3")
self.assertEquals(msg.get_bytes(2), "\x00\x3f")
self.assertEquals(msg.get_list(), ["huey", "dewey", "louie"])
msg = Message(self.__c)
self.assertEquals(msg.get_int64(), 5)
self.assertEquals(msg.get_int64(), 0xF5E4D3C2B109L)
self.assertEquals(msg.get_mpint(), 17)
self.assertEquals(msg.get_mpint(), 0xF5E4D3C2B109L)
self.assertEquals(msg.get_mpint(), -0x65E4D3C2B109L)
def _parse_userauth_request(self, m):
if not self.transport.server_mode:
# er, uh... what?
m = Message()
m.add_byte(cMSG_USERAUTH_FAILURE)
m.add_string('none')
m.add_boolean(False)
self.transport._send_message(m)
return
if self.authenticated:
# ignore
return
username = m.get_text()
service = m.get_text()
method = m.get_text()
self.transport._log(
DEBUG, 'Auth request (type=%s) service=%s, username=%s' %
(method, service, username))
if service != 'ssh-connection':
self._disconnect_service_not_available()
return
if (self.auth_username
is not None) and (self.auth_username != username):
self.transport._log(
WARNING,
'Auth rejected because the client attempted to change username in mid-flight'
)
self._disconnect_no_more_auth()
return
self.auth_username = username
# check if GSS-API authentication is enabled
gss_auth = self.transport.server_object.enable_auth_gssapi()
if method == 'none':
result = self.transport.server_object.check_auth_none(username)
elif method == 'password':
changereq = m.get_boolean()
password = m.get_binary()
try:
password = password.decode('UTF-8')
except UnicodeError:
# some clients/servers expect non-utf-8 passwords!
# in this case, just return the raw byte string.
pass
if changereq:
# always treated as failure, since we don't support changing passwords, but collect
# the list of valid auth types from the callback anyway
self.transport._log(
DEBUG, 'Auth request to change passwords (rejected)')
newpassword = m.get_binary()
try:
newpassword = newpassword.decode('UTF-8', 'replace')
except UnicodeError:
pass
result = AUTH_FAILED
else:
result = self.transport.server_object.check_auth_password(
username, password)
elif method == 'publickey':
sig_attached = m.get_boolean()
keytype = m.get_text()
keyblob = m.get_binary()
try:
key = self.transport._key_info[keytype](Message(keyblob))
except SSHException as e:
self.transport._log(INFO,
'Auth rejected: public key: %s' % str(e))
key = None
except:
self.transport._log(
INFO, 'Auth rejected: unsupported or mangled public key')
key = None
if key is None:
self._disconnect_no_more_auth()
return
# first check if this key is okay... if not, we can skip the verify
result = self.transport.server_object.check_auth_publickey(
username, key)
if result != AUTH_FAILED:
# key is okay, verify it
if not sig_attached:
# client wants to know if this key is acceptable, before it
# signs anything... send special "ok" message
m = Message()
m.add_byte(cMSG_USERAUTH_PK_OK)
m.add_string(keytype)
m.add_string(keyblob)
self.transport._send_message(m)
return
sig = Message(m.get_binary())
blob = self._get_session_blob(key, service, username)
if not key.verify_ssh_sig(blob, sig):
self.transport._log(INFO,
'Auth rejected: invalid signature')
result = AUTH_FAILED
elif method == 'keyboard-interactive':
lang = m.get_string()
submethods = m.get_string()
result = self.transport.server_object.check_auth_interactive(
username, submethods)
if isinstance(result, InteractiveQuery):
# make interactive query instead of response
self._interactive_query(result)
return
elif method == "gssapi-with-mic" and gss_auth:
sshgss = GSSAuth(method)
# Read the number of OID mechanisms supported by the client.
# OpenSSH sends just one OID. It's the Kerveros V5 OID and that's
# the only OID we support.
mechs = m.get_int()
# We can't accept more than one OID, so if the SSH client sends
# more than one, disconnect.
if mechs > 1:
self.transport._log(
INFO,
'Disconnect: Received more than one GSS-API OID mechanism')
self._disconnect_no_more_auth()
desired_mech = m.get_string()
mech_ok = sshgss.ssh_check_mech(desired_mech)
# if we don't support the mechanism, disconnect.
if not mech_ok:
self.transport._log(
INFO,
'Disconnect: Received an invalid GSS-API OID mechanism')
self._disconnect_no_more_auth()
# send the Kerberos V5 GSSAPI OID to the client
supported_mech = sshgss.ssh_gss_oids("server")
# RFC 4462 says we are not required to implement GSS-API error
# messages. See section 3.8 in http://www.ietf.org/rfc/rfc4462.txt
while True:
m = Message()
m.add_byte(cMSG_USERAUTH_GSSAPI_RESPONSE)
m.add_bytes(supported_mech)
self.transport._send_message(m)
ptype, m = self.transport.packetizer.read_message()
if ptype == MSG_USERAUTH_GSSAPI_TOKEN:
client_token = m.get_string()
# use the client token as input to establish a secure
# context.
try:
token = sshgss.ssh_accept_sec_context(
self.gss_host, client_token, username)
except Exception:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
raise
if token is not None:
m = Message()
m.add_byte(cMSG_USERAUTH_GSSAPI_TOKEN)
m.add_string(token)
self.transport._send_message(m)
else:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
return
# check MIC
ptype, m = self.transport.packetizer.read_message()
if ptype == MSG_USERAUTH_GSSAPI_MIC:
break
mic_token = m.get_string()
try:
sshgss.ssh_check_mic(mic_token, self.transport.session_id,
username)
except Exception:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
raise
# TODO: Implement client credential saving.
# The OpenSSH server is able to create a TGT with the delegated
# client credentials, but this is not supported by GSS-API.
result = AUTH_SUCCESSFUL
self.transport.server_object.check_auth_gssapi_with_mic(
username, result)
elif method == "gssapi-keyex" and gss_auth:
mic_token = m.get_string()
sshgss = self.transport.kexgss_ctxt
if sshgss is None:
# If there is no valid context, we reject the authentication
result = AUTH_FAILED
self._send_auth_result(username, method, result)
try:
sshgss.ssh_check_mic(mic_token, self.transport.session_id,
self.auth_username)
except Exception:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
raise
result = AUTH_SUCCESSFUL
self.transport.server_object.check_auth_gssapi_keyex(
username, result)
else:
result = self.transport.server_object.check_auth_none(username)
# okay, send result
self._send_auth_result(username, method, result)
def _parse_userauth_request(self, m):
if not self.transport.server_mode:
# er, uh... what?
m = Message()
m.add_byte(cMSG_USERAUTH_FAILURE)
m.add_string('none')
m.add_boolean(False)
self.transport._send_message(m)
return
if self.authenticated:
# ignore
return
username = m.get_text()
service = m.get_text()
method = m.get_text()
self.transport._log(DEBUG, 'Auth request (type=%s) service=%s, username=%s' % (method, service, username))
if service != 'ssh-connection':
self._disconnect_service_not_available()
return
if (self.auth_username is not None) and (self.auth_username != username):
self.transport._log(WARNING, 'Auth rejected because the client attempted to change username in mid-flight')
self._disconnect_no_more_auth()
return
self.auth_username = username
# check if GSS-API authentication is enabled
gss_auth = self.transport.server_object.enable_auth_gssapi()
if method == 'none':
result = self.transport.server_object.check_auth_none(username)
elif method == 'password':
changereq = m.get_boolean()
password = m.get_binary()
try:
password = password.decode('UTF-8')
except UnicodeError:
# some clients/servers expect non-utf-8 passwords!
# in this case, just return the raw byte string.
pass
if changereq:
# always treated as failure, since we don't support changing passwords, but collect
# the list of valid auth types from the callback anyway
self.transport._log(DEBUG, 'Auth request to change passwords (rejected)')
newpassword = m.get_binary()
try:
newpassword = newpassword.decode('UTF-8', 'replace')
except UnicodeError:
pass
result = AUTH_FAILED
else:
result = self.transport.server_object.check_auth_password(username, password)
elif method == 'publickey':
sig_attached = m.get_boolean()
keytype = m.get_text()
keyblob = m.get_binary()
try:
key = self.transport._key_info[keytype](Message(keyblob))
except SSHException as e:
self.transport._log(INFO, 'Auth rejected: public key: %s' % str(e))
key = None
except:
self.transport._log(INFO, 'Auth rejected: unsupported or mangled public key')
key = None
if key is None:
self._disconnect_no_more_auth()
return
# first check if this key is okay... if not, we can skip the verify
result = self.transport.server_object.check_auth_publickey(username, key)
if result != AUTH_FAILED:
# key is okay, verify it
if not sig_attached:
# client wants to know if this key is acceptable, before it
# signs anything... send special "ok" message
m = Message()
m.add_byte(cMSG_USERAUTH_PK_OK)
m.add_string(keytype)
m.add_string(keyblob)
self.transport._send_message(m)
return
sig = Message(m.get_binary())
blob = self._get_session_blob(key, service, username)
if not key.verify_ssh_sig(blob, sig):
self.transport._log(INFO, 'Auth rejected: invalid signature')
result = AUTH_FAILED
elif method == 'keyboard-interactive':
lang = m.get_string()
submethods = m.get_string()
result = self.transport.server_object.check_auth_interactive(username, submethods)
if isinstance(result, InteractiveQuery):
# make interactive query instead of response
self._interactive_query(result)
return
elif method == "gssapi-with-mic" and gss_auth:
sshgss = GSSAuth(method)
# Read the number of OID mechanisms supported by the client.
# OpenSSH sends just one OID. It's the Kerveros V5 OID and that's
# the only OID we support.
mechs = m.get_int()
# We can't accept more than one OID, so if the SSH client sends
# more than one, disconnect.
if mechs > 1:
self.transport._log(INFO,
'Disconnect: Received more than one GSS-API OID mechanism')
self._disconnect_no_more_auth()
desired_mech = m.get_string()
mech_ok = sshgss.ssh_check_mech(desired_mech)
# if we don't support the mechanism, disconnect.
if not mech_ok:
self.transport._log(INFO,
'Disconnect: Received an invalid GSS-API OID mechanism')
self._disconnect_no_more_auth()
# send the Kerberos V5 GSSAPI OID to the client
supported_mech = sshgss.ssh_gss_oids("server")
# RFC 4462 says we are not required to implement GSS-API error
# messages. See section 3.8 in http://www.ietf.org/rfc/rfc4462.txt
while True:
m = Message()
m.add_byte(cMSG_USERAUTH_GSSAPI_RESPONSE)
m.add_bytes(supported_mech)
self.transport._send_message(m)
ptype, m = self.transport.packetizer.read_message()
if ptype == MSG_USERAUTH_GSSAPI_TOKEN:
client_token = m.get_string()
# use the client token as input to establish a secure
# context.
try:
token = sshgss.ssh_accept_sec_context(self.gss_host,
client_token,
username)
except Exception:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
raise
if token is not None:
m = Message()
m.add_byte(cMSG_USERAUTH_GSSAPI_TOKEN)
m.add_string(token)
self.transport._send_message(m)
else:
raise SSHException("Client asked to handle paket %s"
%MSG_NAMES[ptype])
# check MIC
ptype, m = self.transport.packetizer.read_message()
if ptype == MSG_USERAUTH_GSSAPI_MIC:
break
mic_token = m.get_string()
try:
sshgss.ssh_check_mic(mic_token,
self.transport.session_id,
username)
except Exception:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
raise
# TODO: Implement client credential saving.
# The OpenSSH server is able to create a TGT with the delegated
# client credentials, but this is not supported by GSS-API.
result = AUTH_SUCCESSFUL
self.transport.server_object.check_auth_gssapi_with_mic(username, result)
elif method == "gssapi-keyex" and gss_auth:
mic_token = m.get_string()
sshgss = self.transport.kexgss_ctxt
if sshgss is None:
# If there is no valid context, we reject the authentication
result = AUTH_FAILED
self._send_auth_result(username, method, result)
try:
sshgss.ssh_check_mic(mic_token,
self.transport.session_id,
self.auth_username)
except Exception:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
raise
result = AUTH_SUCCESSFUL
self.transport.server_object.check_auth_gssapi_keyex(username, result)
else:
result = self.transport.server_object.check_auth_none(username)
# okay, send result
self._send_auth_result(username, method, result)
def _parse_userauth_request(self, m):
if not self.transport.server_mode:
# er, uh... what?
m = Message()
m.add_byte(cMSG_USERAUTH_FAILURE)
m.add_string('none')
m.add_boolean(0)
self.transport._send_message(m)
return
if self.authenticated:
# ignore
return
username = m.get_text()
service = m.get_text()
method = m.get_text()
self.transport._log(DEBUG, 'Auth request (type=%s) service=%s, username=%s' % (method, service, username))
if service != 'ssh-connection':
self._disconnect_service_not_available()
return
if (self.auth_username is not None) and (self.auth_username != username):
self.transport._log(WARNING, 'Auth rejected because the client attempted to change username in mid-flight')
self._disconnect_no_more_auth()
return
self.auth_username = username
if method == 'none':
result = self.transport.server_object.check_auth_none(username)
elif method == 'password':
changereq = m.get_boolean()
password = m.get_binary()
try:
password = password.decode('UTF-8')
except UnicodeError:
# some clients/servers expect non-utf-8 passwords!
# in this case, just return the raw byte string.
pass
if changereq:
# always treated as failure, since we don't support changing passwords, but collect
# the list of valid auth types from the callback anyway
self.transport._log(DEBUG, 'Auth request to change passwords (rejected)')
newpassword = m.get_binary()
try:
newpassword = newpassword.decode('UTF-8', 'replace')
except UnicodeError:
pass
result = AUTH_FAILED
else:
result = self.transport.server_object.check_auth_password(username, password)
elif method == 'publickey':
sig_attached = m.get_boolean()
keytype = m.get_text()
keyblob = m.get_binary()
try:
key = self.transport._key_info[keytype](Message(keyblob))
except SSHException:
e = sys.exc_info()[1]
self.transport._log(INFO, 'Auth rejected: public key: %s' % str(e))
key = None
except:
self.transport._log(INFO, 'Auth rejected: unsupported or mangled public key')
key = None
if key is None:
self._disconnect_no_more_auth()
return
# first check if this key is okay... if not, we can skip the verify
result = self.transport.server_object.check_auth_publickey(username, key)
if result != AUTH_FAILED:
# key is okay, verify it
if not sig_attached:
# client wants to know if this key is acceptable, before it
# signs anything... send special "ok" message
m = Message()
m.add_byte(cMSG_USERAUTH_PK_OK)
m.add_string(keytype)
m.add_string(keyblob)
self.transport._send_message(m)
return
sig = Message(m.get_binary())
blob = self._get_session_blob(key, service, username)
if not key.verify_ssh_sig(blob, sig):
self.transport._log(INFO, 'Auth rejected: invalid signature')
result = AUTH_FAILED
elif method == 'keyboard-interactive':
lang = m.get_string()
submethods = m.get_string()
result = self.transport.server_object.check_auth_interactive(username, submethods)
if isinstance(result, InteractiveQuery):
# make interactive query instead of response
self._interactive_query(result)
return
else:
result = self.transport.server_object.check_auth_none(username)
# okay, send result
self._send_auth_result(username, method, result)
def _parse_userauth_request(self, m):
if not self.transport.server_mode:
# er, uh... what?
m = Message()
m.add_byte(cMSG_USERAUTH_FAILURE)
m.add_string('none')
m.add_boolean(False)
self.transport._send_message(m)
return
if self.authenticated:
# ignore
return
username = m.get_text()
service = m.get_text()
method = m.get_text()
self.transport._log(DEBUG, 'Auth request (type=%s) service=%s, username=%s' % (method, service, username))
if service != 'ssh-connection':
self._disconnect_service_not_available()
return
if (self.auth_username is not None) and (self.auth_username != username):
self.transport._log(WARNING, 'Auth rejected because the client attempted to change username in mid-flight')
self._disconnect_no_more_auth()
return
self.auth_username = username
if method == 'none':
result = self.transport.server_object.check_auth_none(username)
elif method == 'password':
changereq = m.get_boolean()
password = m.get_binary()
try:
password = password.decode('UTF-8')
except UnicodeError:
# some clients/servers expect non-utf-8 passwords!
# in this case, just return the raw byte string.
pass
if changereq:
# always treated as failure, since we don't support changing passwords, but collect
# the list of valid auth types from the callback anyway
self.transport._log(DEBUG, 'Auth request to change passwords (rejected)')
newpassword = m.get_binary()
try:
newpassword = newpassword.decode('UTF-8', 'replace')
except UnicodeError:
pass
result = AUTH_FAILED
else:
result = self.transport.server_object.check_auth_password(username, password)
elif method == 'publickey':
sig_attached = m.get_boolean()
keytype = m.get_text()
keyblob = m.get_binary()
try:
key = self.transport._key_info[keytype](Message(keyblob))
except SSHException as e:
self.transport._log(INFO, 'Auth rejected: public key: %s' % str(e))
key = None
except:
self.transport._log(INFO, 'Auth rejected: unsupported or mangled public key')
key = None
if key is None:
self._disconnect_no_more_auth()
return
# first check if this key is okay... if not, we can skip the verify
result = self.transport.server_object.check_auth_publickey(username, key)
if result != AUTH_FAILED:
# key is okay, verify it
if not sig_attached:
# client wants to know if this key is acceptable, before it
# signs anything... send special "ok" message
m = Message()
m.add_byte(cMSG_USERAUTH_PK_OK)
m.add_string(keytype)
m.add_string(keyblob)
self.transport._send_message(m)
return
sig = Message(m.get_binary())
blob = self._get_session_blob(key, service, username)
if not key.verify_ssh_sig(blob, sig):
self.transport._log(INFO, 'Auth rejected: invalid signature')
result = AUTH_FAILED
elif method == 'keyboard-interactive':
lang = m.get_string()
submethods = m.get_string()
result = self.transport.server_object.check_auth_interactive(username, submethods)
if isinstance(result, InteractiveQuery):
# make interactive query instead of response
self._interactive_query(result)
return
else:
result = self.transport.server_object.check_auth_none(username)
# okay, send result
self._send_auth_result(username, method, result)
def _parse_userauth_request(self, m):
if not self.transport.server_mode:
# er, uh... what?
m = Message()
m.add_byte(cMSG_USERAUTH_FAILURE)
m.add_string("none")
m.add_boolean(False)
self.transport._send_message(m)
return
if self.authenticated:
# ignore
return
username = m.get_text()
service = m.get_text()
method = m.get_text()
self._log(
DEBUG,
"Auth request (type={}) service={}, username={}".format(
method, service, username),
)
if service != "ssh-connection":
self._disconnect_service_not_available()
return
if (self.auth_username
is not None) and (self.auth_username != username):
self._log(
WARNING,
"Auth rejected because the client attempted to change username in mid-flight", # noqa
)
self._disconnect_no_more_auth()
return
self.auth_username = username
# check if GSS-API authentication is enabled
gss_auth = self.transport.server_object.enable_auth_gssapi()
if method == "none":
result = self.transport.server_object.check_auth_none(username)
elif method == "password":
changereq = m.get_boolean()
password = m.get_binary()
try:
password = password.decode("UTF-8")
except UnicodeError:
# some clients/servers expect non-utf-8 passwords!
# in this case, just return the raw byte string.
pass
if changereq:
# always treated as failure, since we don't support changing
# passwords, but collect the list of valid auth types from
# the callback anyway
self._log(DEBUG, "Auth request to change passwords (rejected)")
newpassword = m.get_binary()
try:
newpassword = newpassword.decode("UTF-8", "replace")
except UnicodeError:
pass
result = AUTH_FAILED
else:
result = self.transport.server_object.check_auth_password(
username, password)
elif method == "publickey":
sig_attached = m.get_boolean()
keytype = m.get_text()
keyblob = m.get_binary()
try:
key = self.transport._key_info[keytype](Message(keyblob))
except SSHException as e:
self._log(INFO, "Auth rejected: public key: {}".format(str(e)))
key = None
except Exception as e:
msg = (
"Auth rejected: unsupported or mangled public key ({}: {})"
) # noqa
self._log(INFO, msg.format(e.__class__.__name__, e))
key = None
if key is None:
self._disconnect_no_more_auth()
return
# first check if this key is okay... if not, we can skip the verify
result = self.transport.server_object.check_auth_publickey(
username, key)
if result != AUTH_FAILED:
# key is okay, verify it
if not sig_attached:
# client wants to know if this key is acceptable, before it
# signs anything... send special "ok" message
m = Message()
m.add_byte(cMSG_USERAUTH_PK_OK)
m.add_string(keytype)
m.add_string(keyblob)
self.transport._send_message(m)
return
sig = Message(m.get_binary())
blob = self._get_session_blob(key, service, username)
if not key.verify_ssh_sig(blob, sig):
self._log(INFO, "Auth rejected: invalid signature")
result = AUTH_FAILED
elif method == "keyboard-interactive":
submethods = m.get_string()
result = self.transport.server_object.check_auth_interactive(
username, submethods)
if isinstance(result, InteractiveQuery):
# make interactive query instead of response
self._interactive_query(result)
return
elif method == "gssapi-with-mic" and gss_auth:
sshgss = GSSAuth(method)
# Read the number of OID mechanisms supported by the client.
# OpenSSH sends just one OID. It's the Kerveros V5 OID and that's
# the only OID we support.
mechs = m.get_int()
# We can't accept more than one OID, so if the SSH client sends
# more than one, disconnect.
if mechs > 1:
self._log(
INFO,
"Disconnect: Received more than one GSS-API OID mechanism",
)
self._disconnect_no_more_auth()
desired_mech = m.get_string()
mech_ok = sshgss.ssh_check_mech(desired_mech)
# if we don't support the mechanism, disconnect.
if not mech_ok:
self._log(
INFO,
"Disconnect: Received an invalid GSS-API OID mechanism",
)
self._disconnect_no_more_auth()
# send the Kerberos V5 GSSAPI OID to the client
supported_mech = sshgss.ssh_gss_oids("server")
# RFC 4462 says we are not required to implement GSS-API error
# messages. See section 3.8 in http://www.ietf.org/rfc/rfc4462.txt
m = Message()
m.add_byte(cMSG_USERAUTH_GSSAPI_RESPONSE)
m.add_bytes(supported_mech)
self.transport.auth_handler = GssapiWithMicAuthHandler(
self, sshgss)
self.transport._expected_packet = (
MSG_USERAUTH_GSSAPI_TOKEN,
MSG_USERAUTH_REQUEST,
MSG_SERVICE_REQUEST,
)
self.transport._send_message(m)
return
elif method == "gssapi-keyex" and gss_auth:
mic_token = m.get_string()
sshgss = self.transport.kexgss_ctxt
if sshgss is None:
# If there is no valid context, we reject the authentication
result = AUTH_FAILED
self._send_auth_result(username, method, result)
try:
sshgss.ssh_check_mic(mic_token, self.transport.session_id,
self.auth_username)
except Exception:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
raise
result = AUTH_SUCCESSFUL
self.transport.server_object.check_auth_gssapi_keyex(
username, result)
else:
result = self.transport.server_object.check_auth_none(username)
# okay, send result
self._send_auth_result(username, method, result)
def _parse_userauth_request(self, m):
if not self.transport.server_mode:
# er, uh... what?
m = Message()
m.add_byte(cMSG_USERAUTH_FAILURE)
m.add_string("none")
m.add_boolean(False)
self.transport._send_message(m)
return
if self.authenticated:
# ignore
return
username = m.get_text()
service = m.get_text()
method = m.get_text()
self._log(
DEBUG,
"Auth request (type={}) service={}, username={}".format(
method, service, username
),
)
if service != "ssh-connection":
self._disconnect_service_not_available()
return
if (self.auth_username is not None) and (
self.auth_username != username
):
self._log(
WARNING,
"Auth rejected because the client attempted to change username in mid-flight", # noqa
)
self._disconnect_no_more_auth()
return
self.auth_username = username
# check if GSS-API authentication is enabled
gss_auth = self.transport.server_object.enable_auth_gssapi()
if method == "none":
result = self.transport.server_object.check_auth_none(username)
elif method == "password":
changereq = m.get_boolean()
password = m.get_binary()
try:
password = password.decode("UTF-8")
except UnicodeError:
# some clients/servers expect non-utf-8 passwords!
# in this case, just return the raw byte string.
pass
if changereq:
# always treated as failure, since we don't support changing
# passwords, but collect the list of valid auth types from
# the callback anyway
self._log(DEBUG, "Auth request to change passwords (rejected)")
newpassword = m.get_binary()
try:
newpassword = newpassword.decode("UTF-8", "replace")
except UnicodeError:
pass
result = AUTH_FAILED
else:
result = self.transport.server_object.check_auth_password(
username, password
)
elif method == "publickey":
sig_attached = m.get_boolean()
keytype = m.get_text()
keyblob = m.get_binary()
try:
key = self.transport._key_info[keytype](Message(keyblob))
except SSHException as e:
self._log(INFO, "Auth rejected: public key: {}".format(str(e)))
key = None
except Exception as e:
msg = (
"Auth rejected: unsupported or mangled public key ({}: {})"
) # noqa
self._log(INFO, msg.format(e.__class__.__name__, e))
key = None
if key is None:
self._disconnect_no_more_auth()
return
# first check if this key is okay... if not, we can skip the verify
result = self.transport.server_object.check_auth_publickey(
username, key
)
if result != AUTH_FAILED:
# key is okay, verify it
if not sig_attached:
# client wants to know if this key is acceptable, before it
# signs anything... send special "ok" message
m = Message()
m.add_byte(cMSG_USERAUTH_PK_OK)
m.add_string(keytype)
m.add_string(keyblob)
self.transport._send_message(m)
return
sig = Message(m.get_binary())
blob = self._get_session_blob(key, service, username)
if not key.verify_ssh_sig(blob, sig):
self._log(INFO, "Auth rejected: invalid signature")
result = AUTH_FAILED
elif method == "keyboard-interactive":
submethods = m.get_string()
result = self.transport.server_object.check_auth_interactive(
username, submethods
)
if isinstance(result, InteractiveQuery):
# make interactive query instead of response
self._interactive_query(result)
return
elif method == "gssapi-with-mic" and gss_auth:
sshgss = GSSAuth(method)
# Read the number of OID mechanisms supported by the client.
# OpenSSH sends just one OID. It's the Kerveros V5 OID and that's
# the only OID we support.
mechs = m.get_int()
# We can't accept more than one OID, so if the SSH client sends
# more than one, disconnect.
if mechs > 1:
self._log(
INFO,
"Disconnect: Received more than one GSS-API OID mechanism",
)
self._disconnect_no_more_auth()
desired_mech = m.get_string()
mech_ok = sshgss.ssh_check_mech(desired_mech)
# if we don't support the mechanism, disconnect.
if not mech_ok:
self._log(
INFO,
"Disconnect: Received an invalid GSS-API OID mechanism",
)
self._disconnect_no_more_auth()
# send the Kerberos V5 GSSAPI OID to the client
supported_mech = sshgss.ssh_gss_oids("server")
# RFC 4462 says we are not required to implement GSS-API error
# messages. See section 3.8 in http://www.ietf.org/rfc/rfc4462.txt
m = Message()
m.add_byte(cMSG_USERAUTH_GSSAPI_RESPONSE)
m.add_bytes(supported_mech)
self.transport.auth_handler = GssapiWithMicAuthHandler(
self, sshgss
)
self.transport._expected_packet = (
MSG_USERAUTH_GSSAPI_TOKEN,
MSG_USERAUTH_REQUEST,
MSG_SERVICE_REQUEST,
)
self.transport._send_message(m)
return
elif method == "gssapi-keyex" and gss_auth:
mic_token = m.get_string()
sshgss = self.transport.kexgss_ctxt
if sshgss is None:
# If there is no valid context, we reject the authentication
result = AUTH_FAILED
self._send_auth_result(username, method, result)
try:
sshgss.ssh_check_mic(
mic_token, self.transport.session_id, self.auth_username
)
except Exception:
result = AUTH_FAILED
self._send_auth_result(username, method, result)
raise
result = AUTH_SUCCESSFUL
self.transport.server_object.check_auth_gssapi_keyex(
username, result
)
else:
result = self.transport.server_object.check_auth_none(username)
# okay, send result
self._send_auth_result(username, method, result)
