def l5qc(main_gui, cf, ds4):
ds5 = pfp_io.copy_datastructure(cf, ds4)
# ds5 will be empty (logical false) if an error occurs in copy_datastructure
# return from this routine if this is the case
if not ds5:
return ds5
# set some attributes for this level
pfp_utils.UpdateGlobalAttributes(cf, ds5, "L5")
# parse the control file for information on how the user wants to do the gap filling
l5_info = pfp_gf.ParseL5ControlFile(cf, ds5)
if ds5.returncodes["value"] != 0:
return ds5
# check to see if we have any imports
pfp_gf.ImportSeries(cf, ds5)
# re-apply the quality control checks (range, diurnal and rules)
pfp_ck.do_qcchecks(cf, ds5)
pfp_gf.CheckL5Drivers(ds5, l5_info)
if ds5.returncodes["value"] != 0:
return ds5
# now do the flux gap filling methods
# *** start of the section that does the gap filling of the fluxes ***
pfp_gf.CheckGapLengths(cf, ds5, l5_info)
if ds5.returncodes["value"] != 0:
return ds5
# apply the turbulence filter (if requested)
pfp_ck.ApplyTurbulenceFilter(cf, ds5, l5_info)
# fill short gaps using interpolation
pfp_gf.GapFillUsingInterpolation(cf, ds5)
# gap fill using marginal distribution sampling
if "GapFillUsingMDS" in l5_info:
pfp_gfMDS.GapFillUsingMDS(ds5, l5_info, "GapFillUsingMDS")
# do the gap filling using SOLO
if "GapFillUsingSOLO" in l5_info:
pfp_gfSOLO.GapFillUsingSOLO(main_gui, ds5, l5_info, "GapFillUsingSOLO")
if ds5.returncodes["value"] != 0:
return ds5
# fill long gaps using SOLO
if "GapFillLongSOLO" in l5_info:
pfp_gfSOLO.GapFillUsingSOLO(main_gui, ds5, l5_info, "GapFillLongSOLO")
if ds5.returncodes["value"] != 0:
return ds5
# merge the gap filled drivers into a single series
pfp_ts.MergeSeriesUsingDict(ds5, l5_info, merge_order="standard")
# check that all targets were gap filled
pfp_gf.CheckL5Targets(ds5, l5_info)
if ds5.returncodes["value"] != 0:
return ds5
# calculate Monin-Obukhov length
pfp_ts.CalculateMoninObukhovLength(ds5)
# write the percentage of good data as a variable attribute
pfp_utils.get_coverage_individual(ds5)
# write the percentage of good data for groups
pfp_utils.get_coverage_groups(ds5)
# remove intermediate series from the data structure
pfp_ts.RemoveIntermediateSeries(ds5, l5_info)
return ds5
def l5qc(cf, ds4):
ds5 = pfp_io.copy_datastructure(cf, ds4)
# ds4 will be empty (logical false) if an error occurs in copy_datastructure
# return from this routine if this is the case
if not ds5:
return ds5
# set some attributes for this level
pfp_utils.UpdateGlobalAttributes(cf, ds5, "L5")
ds5.cf = cf
# create a dictionary to hold the gap filling data
ds_alt = {}
# check to see if we have any imports
pfp_gf.ImportSeries(cf, ds5)
# re-apply the quality control checks (range, diurnal and rules)
pfp_ck.do_qcchecks(cf, ds5)
# now do the flux gap filling methods
label_list = pfp_utils.get_label_list_from_cf(cf)
for label in label_list:
# parse the control file for information on how the user wants to do the gap filling
pfp_gf.GapFillParseControlFile(cf, ds5, label, ds_alt)
# *** start of the section that does the gap filling of the fluxes ***
# apply the turbulence filter (if requested)
pfp_ck.ApplyTurbulenceFilter(cf, ds5)
# fill short gaps using interpolation
pfp_gf.GapFillUsingInterpolation(cf, ds5)
# do the gap filling using SOLO
pfp_gfSOLO.GapFillUsingSOLO(cf, ds4, ds5)
if ds5.returncodes["solo"] == "quit":
return ds5
# gap fill using marginal distribution sampling
pfp_gfMDS.GapFillFluxUsingMDS(cf, ds5)
# gap fill using climatology
pfp_gf.GapFillFromClimatology(ds5)
# merge the gap filled drivers into a single series
pfp_ts.MergeSeriesUsingDict(ds5, merge_order="standard")
# calculate Monin-Obukhov length
pfp_ts.CalculateMoninObukhovLength(ds5)
# write the percentage of good data as a variable attribute
pfp_utils.get_coverage_individual(ds5)
# write the percentage of good data for groups
pfp_utils.get_coverage_groups(ds5)
return ds5
def l4qc(cf, ds3):
# !!! code here to use existing L4 file
# logic
# if the L4 doesn't exist
# - create ds4 by using copy.deepcopy(ds3)
# if the L4 does exist and the "UseExistingL4File" option is False
# - create ds4 by using copy.deepcopy(ds3)
# if the L4 does exist and the "UseExistingL4File" option is True
# - read the contents of the L4 netCDF file
# - check the start and end dates of the L3 and L4 data
# - if these are the same then tell the user there is nothing to do
# - copy the L3 data to the L4 data structure
# - replace the L3 data with the L4 data
#ds4 = copy.deepcopy(ds3)
ds4 = pfp_io.copy_datastructure(cf, ds3)
# ds4 will be empty (logical false) if an error occurs in copy_datastructure
# return from this routine if this is the case
if not ds4: return ds4
# set some attributes for this level
pfp_utils.UpdateGlobalAttributes(cf, ds4, "L4")
ds4.cf = cf
## calculate the available energy
#if "Fa" not in ds4.series.keys():
#pfp_ts.CalculateAvailableEnergy(ds4,Fa_out='Fa',Fn_in='Fn',Fg_in='Fg')
# create a dictionary to hold the gap filling data
ds_alt = {}
# check to see if we have any imports
pfp_gf.ImportSeries(cf, ds4)
# re-apply the quality control checks (range, diurnal and rules)
pfp_ck.do_qcchecks(cf, ds4)
# now do the meteorological driver gap filling
for ThisOne in cf["Drivers"].keys():
if ThisOne not in ds4.series.keys():
logger.warning("Series " + ThisOne + " not in data structure")
continue
# parse the control file for information on how the user wants to do the gap filling
pfp_gf.GapFillParseControlFile(cf, ds4, ThisOne, ds_alt)
# *** start of the section that does the gap filling of the drivers ***
# fill short gaps using interpolation
pfp_gf.GapFillUsingInterpolation(cf, ds4)
# gap fill using climatology
pfp_gf.GapFillFromClimatology(ds4)
# do the gap filling using the ACCESS output
pfp_gfALT.GapFillFromAlternate(cf, ds4, ds_alt)
if ds4.returncodes["alternate"] == "quit": return ds4
# gap fill using SOLO
pfp_gfSOLO.GapFillUsingSOLO(cf, ds3, ds4)
if ds4.returncodes["solo"] == "quit": return ds4
# merge the first group of gap filled drivers into a single series
pfp_ts.MergeSeriesUsingDict(ds4, merge_order="prerequisite")
# re-calculate the ground heat flux but only if requested in control file
opt = pfp_utils.get_keyvaluefromcf(cf, ["Options"],
"CorrectFgForStorage",
default="No",
mode="quiet")
if opt.lower() != "no":
pfp_ts.CorrectFgForStorage(cf,
ds4,
Fg_out='Fg',
Fg_in='Fg_Av',
Ts_in='Ts',
Sws_in='Sws')
# re-calculate the net radiation
pfp_ts.CalculateNetRadiation(cf,
ds4,
Fn_out='Fn',
Fsd_in='Fsd',
Fsu_in='Fsu',
Fld_in='Fld',
Flu_in='Flu')
# re-calculate the available energy
pfp_ts.CalculateAvailableEnergy(ds4, Fa_out='Fa', Fn_in='Fn', Fg_in='Fg')
# merge the second group of gap filled drivers into a single series
pfp_ts.MergeSeriesUsingDict(ds4, merge_order="standard")
# re-calculate the water vapour concentrations
pfp_ts.CalculateHumiditiesAfterGapFill(ds4)
# re-calculate the meteorological variables
pfp_ts.CalculateMeteorologicalVariables(ds4)
# the Tumba rhumba
pfp_ts.CalculateComponentsFromWsWd(ds4)
# check for any missing data
pfp_utils.get_missingingapfilledseries(ds4)
# write the percentage of good data as a variable attribute
pfp_utils.get_coverage_individual(ds4)
# write the percentage of good data for groups
pfp_utils.get_coverage_groups(ds4)
return ds4