def Activated (self):
import pipeCmd, frameCmd
from Part import Plane
refFace=[f for f in frameCmd.faces() if type(f.Surface)==Plane][0]
FreeCAD.activeDocument().openTransaction('Lay-down the pipe')
for b in frameCmd.beams():
if pipeCmd.isPipe(b):
pipeCmd.laydownTheTube(b,refFace)
FreeCAD.activeDocument().recompute()
FreeCAD.activeDocument().commitTransaction()
def Activated(self):
import pipeCmd, frameCmd
from Part import Plane
refFace = [f for f in frameCmd.faces() if type(f.Surface) == Plane][0]
FreeCAD.activeDocument().openTransaction('Lay-down the pipe')
for b in frameCmd.beams():
if pipeCmd.isPipe(b):
pipeCmd.laydownTheTube(b, refFace)
FreeCAD.activeDocument().recompute()
FreeCAD.activeDocument().commitTransaction()
def getL(self):
l=[p.Height for p in frameCmd.beams() if pipeCmd.isPipe(p)]
if l:
refL=min(l)
self.lab0.setText(str(refL))
self.refL=float(refL)
self.edit1.setText("%.2f" %(self.refL*self.slider.value()/100.0))
else:
self.lab0.setText('<reference>')
self.refL=0.0
self.edit1.setText(str(self.slider.value())+'%')
def Activated (self):
import pipeCmd, frameCmd
from Part import Plane
selex=FreeCADGui.Selection.getSelectionEx()
for sx in selex:
sxFaces=[f for f in frameCmd.faces([sx]) if type(f.Surface)==Plane]
if len(sxFaces)>0:
refFace=sxFaces[0]
support=sx.Object
FreeCAD.activeDocument().openTransaction('Raise-up the support')
for b in frameCmd.beams():
if pipeCmd.isPipe(b):
pipeCmd.laydownTheTube(b,refFace,support)
break
FreeCAD.activeDocument().recompute()
FreeCAD.activeDocument().commitTransaction()
def Activated (self):
import pipeCmd, frameCmd
from Part import Plane
selex=FreeCADGui.Selection.getSelectionEx()
for sx in selex:
sxFaces=[f for f in frameCmd.faces([sx]) if type(f.Surface)==Plane]
if len(sxFaces)>0:
refFace=sxFaces[0]
support=sx.Object
FreeCAD.activeDocument().openTransaction('Raise-up the support')
for b in frameCmd.beams():
if pipeCmd.isPipe(b):
pipeCmd.laydownTheTube(b,refFace,support)
break
FreeCAD.activeDocument().recompute()
FreeCAD.activeDocument().commitTransaction()
def breakPipe(self):
p2nd=None
FreeCAD.activeDocument().openTransaction('Break pipes')
if self.edit1.text()[-1]=='%':
pipes=[p for p in frameCmd.beams() if pipeCmd.isPipe(p)]
for p in pipes:
p2nd=pipeCmd.breakTheTubes(float(p.Height)*float(self.edit1.text().rstrip('%').strip())/100,pipes=[p],gap=float(self.edit2.text()))
if p2nd and self.combo.currentText()!='<none>':
for p in p2nd:
pipeCmd.moveToPyLi(p,self.combo.currentText())
else:
p2nd=pipeCmd.breakTheTubes(float(self.edit1.text()),gap=float(self.edit2.text()))
if p2nd and self.combo.currentText()!='<none>':
for p in p2nd:
pipeCmd.moveToPyLi(p,self.combo.currentText())
FreeCAD.activeDocument().commitTransaction()
FreeCAD.activeDocument().recompute()
def insert(self): # insert the curve
#self.lastElbow=None
self.lastAngle=0
self.dial.setValue(0)
DN=OD=thk=PRating=None
d=self.pipeDictList[self.sizeList.currentRow()]
try:
if float(self.edit1.text())>180:
self.edit1.setText("180")
ang=float(self.edit1.text())
except:
ang=float(pq(d['BendAngle']))
selex=FreeCADGui.Selection.getSelectionEx()
if len(selex)==0: # no selection -> insert one elbow at origin
propList=[d['PSize'],float(pq(d['OD'])),float(pq(d['thk'])),ang,float(pq(d['BendRadius']))]
FreeCAD.activeDocument().openTransaction('Insert elbow in (0,0,0)')
self.lastElbow=pipeCmd.makeElbow(propList)
if self.combo.currentText()!='<none>':
pipeCmd.moveToPyLi(self.lastElbow,self.combo.currentText())
FreeCAD.activeDocument().commitTransaction()
elif len(selex)==1 and len(selex[0].SubObjects)==1: #one selection -> ...
if hasattr(selex[0].Object,'PType') and selex[0].Object.PType in ['Pipe','Elbow','Cap','Reduct']:
DN=selex[0].Object.PSize
OD=float(selex[0].Object.OD)
thk=float(selex[0].Object.thk)
BR=None
for prop in self.pipeDictList:
if prop['PSize']==DN:
BR=float(pq(prop['BendRadius']))
if BR==None:
BR=1.5*OD/2
propList=[DN,OD,thk,ang,BR]
else:
propList=[d['PSize'],float(pq(d['OD'])),float(pq(d['thk'])),ang,float(pq(d['BendRadius']))]
if selex[0].SubObjects[0].ShapeType=="Vertex": # ...on vertex
FreeCAD.activeDocument().openTransaction('Insert elbow on vertex')
self.lastElbow=pipeCmd.makeElbow(propList,selex[0].SubObjects[0].Point)
if self.combo.currentText()!='<none>':
pipeCmd.moveToPyLi(self.lastElbow,self.combo.currentText())
FreeCAD.activeDocument().commitTransaction()
elif selex[0].SubObjects[0].ShapeType=="Edge" and selex[0].SubObjects[0].curvatureAt(0)!=0: # ...on center of curved edge
P=selex[0].SubObjects[0].centerOfCurvatureAt(0)
N=selex[0].SubObjects[0].normalAt(0).cross(selex[0].SubObjects[0].tangentAt(0)).normalize()
FreeCAD.activeDocument().openTransaction('Insert elbow on curved edge')
self.lastElbow=pipeCmd.makeElbow(propList,P) # ,Z)
if pipeCmd.isPipe(selex[0].Object):
ax=selex[0].Object.Shape.Solids[0].CenterOfMass-P
rot=FreeCAD.Rotation(self.lastElbow.Ports[0],ax)
self.lastElbow.Placement.Rotation=rot.multiply(self.lastElbow.Placement.Rotation)
Port0=pipeCmd.getElbowPort(self.lastElbow)
self.lastElbow.Placement.move(P-Port0)
elif pipeCmd.isElbow(selex[0].Object):
p0,p1=[selex[0].Object.Placement.Rotation.multVec(p) for p in selex[0].Object.Ports]
if frameCmd.isParallel(p0,N):
self.lastElbow.Placement.Rotation=FreeCAD.Rotation(self.lastElbow.Ports[0],p0*-1)
else:
self.lastElbow.Placement.Rotation=FreeCAD.Rotation(self.lastElbow.Ports[0],p1*-1)
self.lastElbow.Placement.move(P-pipeCmd.getElbowPort(self.lastElbow))
else:
rot=FreeCAD.Rotation(self.lastElbow.Ports[0],N)
self.lastElbow.Placement.Rotation=rot.multiply(self.lastElbow.Placement.Rotation)
self.lastElbow.Placement.move(self.lastElbow.Placement.Rotation.multVec(self.lastElbow.Ports[0])*-1)
if self.combo.currentText()!='<none>':
pipeCmd.moveToPyLi(self.lastElbow,self.combo.currentText())
FreeCAD.activeDocument().recompute()
FreeCAD.activeDocument().commitTransaction()
else: # multiple selection -> insert one elbow at intersection of two edges or beams or pipes ##
# selection of axes
things=[]
for objEx in selex:
# if the profile is not defined and the selection is one piping object, take its profile for elbow
if OD==thk==None and hasattr(objEx.Object,'PType') and objEx.Object.PType in ['Pipe','Elbow','Cap','Reduct']:
DN=objEx.Object.PSize
OD=objEx.Object.OD
thk=objEx.Object.thk
PRating=objEx.Object.PRating
# if the object is a beam or pipe, append it to the "things"..
if len(frameCmd.beams([objEx.Object]))==1:
things.append(objEx.Object)
else:
# ..else append its edges
for edge in frameCmd.edges([objEx]):
things.append(edge)
if len(things)>=2:
break
FreeCAD.activeDocument().openTransaction('Insert elbow on intersection')
try:
#create the feature
if None in [DN,OD,thk,PRating]:
propList=[d['PSize'],float(pq(d['OD'])),float(pq(d['thk'])),ang,float(pq(d['BendRadius']))]
self.lastElbow=pipeCmd.makeElbowBetweenThings(*things[:2],propList=propList)
self.lastElbow.PRating=self.ratingList.item(self.ratingList.currentRow()).text()
else:
for prop in self.pipeDictList:
if prop['PSize']==DN:
BR=float(pq(prop['BendRadius']))
if BR==None:
BR=1.5*OD/2
propList=[DN,OD,thk,ang,BR]
self.lastElbow=pipeCmd.makeElbowBetweenThings(*things[:2],propList=propList)
self.lastElbow.PRating=PRating
if self.combo.currentText()!='<none>':
pipeCmd.moveToPyLi(self.lastElbow,self.combo.currentText())
except:
FreeCAD.Console.PrintError('Creation of elbow is failed\n')
FreeCAD.activeDocument().commitTransaction()
####
FreeCAD.activeDocument().recompute()