def test_photoreceptor(
print_axon=True,
print_postsynaptic=True,
print_photoreceptor=True,
print_dendrite=False,
print_synaptic_cleft=False,
spike_strengths=[-100]):
data = []
length = 60
period = 100
rest_length = 50
for strength in spike_strengths:
neuron_factory = NeuronFactory()
photoreceptor = neuron_factory.create_neuron(
neuron_type=NeuronTypes.PHOTORECEPTOR,
record = True)
post = neuron_factory.create_neuron(record = True)
synapse = neuron_factory.create_synapse(photoreceptor, post, strength=10)
driver_name = "Light activation %f" % strength
neuron_factory.register_driver(photoreceptor,
PulseDriver(current=strength, period=period,
length=length, delay=rest_length, record=True),
name = driver_name)
neuron_factory.step(args.iterations)
if print_photoreceptor: data.append(("Photoreceptor", photoreceptor.get_record()))
if print_postsynaptic: data.append(("Post", post.get_record()))
data.append(neuron_factory.get_driver_data(driver_name))
if not args.silent:
plot(data, title="Photoreceptor test")
def transmit(strength=0.25, delays=[None, 100]):
data = []
neuron_factory = NeuronFactory()
dendrite_strength = 25
if args.silent:
pre_neuron = neuron_factory.create_neuron()
for delay in delays:
post_neuron = neuron_factory.create_neuron()
synapse = neuron_factory.create_synapse(pre_neuron, post_neuron,
axon_delay=delay, dendrite_strength=dendrite_strength)
else:
pre_neuron_name = "pre strength: %f" % strength
pre_neuron = neuron_factory.create_neuron(probe_name=pre_neuron_name)
post_neuron_names = []
for delay in delays:
name="post delay: %s" % str(delay)
post_neuron_names.append(name)
post_neuron = neuron_factory.create_neuron(probe_name=name)
synapse = neuron_factory.create_synapse(pre_neuron, post_neuron,
axon_delay=delay, dendrite_strength=dendrite_strength)
neuron_factory.register_driver(pre_neuron,
ActivationPulseDriver(activation=strength, period=100, length=1, delay=25))#, decrement=0.01))
neuron_factory.step(args.iterations)
#print("Saved %d out of %d cycles." % (neuron_factory.stable_count, neuron_factory.time))
if not args.silent:
data.append(neuron_factory.get_probe_data(pre_neuron_name))
for name in post_neuron_names:
data.append(neuron_factory.get_probe_data(name))
plot(data, title="Synaptic transmission")
def start():
seasonal_fetch('tt0944947', start=1, end=8)
x_seasons = []
seasonal_mean_ratings = []
mean_rating = 0.00
for i in DATA:
x_seasons.append(i)
ep_count = 0
total_rating = 0.00
x_episodes = []
episode_ratings = []
for j in DATA[i]:
# plot episode-wise
x_episodes.append(j['name'])
episode_ratings.append(j['rating'])
# process data for season wise
total_rating += float(j['rating'])
ep_count += 1
mean_rating = total_rating / ep_count
seasonal_mean_ratings.append(round(mean_rating, 2))
# plot episode-wise data
plot(p_type='stem', x_axis=x_episodes, points=[float(x) for x in episode_ratings],
title=f'GOT - {i.lower()} IMDB episode-wise rating',
x_label='Episode name', y_label='Rating per episode', y_min_lim=3, y_max_lim=10)
# plot season-wise
plot(p_type='plot', x_axis=x_seasons, points=[float(x) for x in seasonal_mean_ratings],
title='GOT - IMDB season-wise ratings (mean)',
x_label='Season', y_label='Rating per season (mean)', y_min_lim=3, y_max_lim=10)
def test1():
data = []
sample = []
num = 25 #number of elements
# Feature set containing (x,y) values of 25 known/training data
#Create arrays of 25x1 of the range (0, 99)
x = np.random.randint(0, 100, (num, 1)).astype(np.float32)
y = np.random.randint(0, 100, (num, 1)).astype(np.float32)
for i in range(0, num):
sample.append([x[i][0], y[i][0]])
arraynp = np.asarray(sample)
# Labels each one either Red or Blue with numbers 0 and 1
#Create array of data 25x1 fo the range 0,2
responses = np.random.randint(0, 2, (num, 1)).astype(np.float32)
"""Example for doing something awesome
plt.scatter(blue[:,0],blue[:,1],80,'b','s')
"""
#print sample
#print arraynp
#print len(arraynp)
data.append(arraynp[responses.ravel() == 1])
data.append(arraynp[responses.ravel() == 0])
p.plot(data)
def state_callback(self, t, dt, linear_velocity, yaw_velocity):
'''
called when a new odometry measurement arrives approx. 200Hz
:param t - simulation time
:param dt - time difference this last invocation
:param linear_velocity - x and y velocity in local quadrotor coordinate frame (independet of roll and pitch)
:param yaw_velocity - velocity around quadrotor z axis (independet of roll and pitch)
:return tuple containing linear x and y velocity control commands in local quadrotor coordinate frame (independet of roll and pitch), and yaw velocity
'''
self.x = self.predictState(dt, self.x, linear_velocity, yaw_velocity)
F = self.calculatePredictStateJacobian(dt, self.x, linear_velocity, yaw_velocity)
self.sigma = self.predictCovariance(self.sigma, F, self.Q);
position = self.x[0:2]
markers = self.get_markers()
self.target_marker_index = self.update_target_marker_index(markers, self.target_marker_index, position)
desired_velocity = self.compute_desired_velocity(markers, self.target_marker_index, position, linear_velocity)
u = self.compute_control_command(t, dt, position, linear_velocity, np.array([markers[self.target_marker_index]]).T, desired_velocity)
u_yaw = self.compute_yaw_control_command(t, dt, self.x[2], yaw_velocity, 0, 0)
plot("x command", u[0]);
self.visualizeState()
return u, u_yaw
def spatial_summation(num_pre = 3):
data = []
neuron_factory = NeuronFactory()
post_neuron = neuron_factory.create_neuron(record=True)
pre_neurons = []
for i in xrange(num_pre):
pre_neuron = neuron_factory.create_neuron(
neuron_type=NeuronTypes.GANGLION,
record = True)
pre_neurons.append(pre_neuron)
synapse = neuron_factory.create_synapse(pre_neuron, post_neuron,
dendrite_strength=10, axon_delay=5)
neuron_factory.register_driver(pre_neuron,
PulseDriver(current=100, period=100*(i+1),
length=1, delay=10 + (2*i), record=True))
neuron_factory.step(args.iterations)
#print("Saved %d out of %d cycles." % (neuron_factory.stable_count, neuron_factory.time))
for pre_neuron in pre_neurons:
data.append(("Pre", pre_neuron.get_record()))
data.append(("Post", post_neuron.get_record()))
if not args.silent:
plot(data, title="Spatial summation test")
def test_gap_junction(strength1 = 0.0015, strength2 = 0.0):
neuron_factory = NeuronFactory()
neuron1_name = "G Neuron %f" % strength1
neuron1 = neuron_factory.create_neuron(probe_name=neuron1_name)
neuron2_name = "G Neuron %f" % strength2
neuron2 = neuron_factory.create_neuron(probe_name=neuron2_name)
neuron3_name = "Control Neuron %f" % strength1
neuron3 = neuron_factory.create_neuron(probe_name=neuron3_name)
rest_time = 1000
driver1 = ConstantDriver(strength1, delay=rest_time)
driver2 = ConstantDriver(strength2, delay=rest_time)
neuron_factory.register_driver(neuron1, driver1)
neuron_factory.register_driver(neuron2, driver2)
neuron_factory.register_driver(neuron3, driver1)
neuron_factory.create_gap_junction(neuron1, neuron2, 1.0)
neuron_factory.step(rest_time+args.iterations)
data = [neuron_factory.get_probe_data(neuron1_name),
neuron_factory.get_probe_data(neuron2_name),
neuron_factory.get_probe_data(neuron3_name)]
if not args.silent:
plot(data, title="Gap junction test")
def main ( ):
graph = { 1: [ 2, 4, 8 ], 2: [ 7, 3, 1 ], 3: [ 2, 6, 4 ],
4: [ 1, 3, 5 ], 5: [ 4, 8, 6 ], 6: [ 5, 3, 7 ],
7: [ 6, 2, 8 ], 8: [ 7, 5, 1 ] }
certificate = [ 1, 2, 3, 4, 5, 6, 7, 7, 1 ]
verify_hamiltonian ( graph, certificate )
plt.plot ( )
def clustering(args):
''' run clustering on a single k'''
print "Feature Analysis/Clustering Mode: single k"
feature_holder = featurevector.feature_holder(filename=FEATURE_VECTOR_FILENAME)
sones_holder = featurevector.feature_holder(filename=SONE_VECTOR_FILENAME)
k = args.k
print feature_holder
mfccs = feature_holder.get_feature('mfcc')
print sones_holder
sones = sones_holder.get_feature('sones')
centroids, distortion = Get_Best_Centroids(k, 1)
print "Distortion for this run: %0.3f" % (distortion)
classes,dist = kmeans.scipy_vq(mfccs, centroids)
# Get the inter class dist matrix
inter_class_dist_matrix = mir_utils.GetSquareDistanceMatrix(centroids)
eventBeginnings = feature_holder.get_event_start_indecies()
# write audio if given -w
if args.plot_segments:
PlotWaveformWClasses(k, feature_holder,classes)
if args.write_audio_results:
WriteAudioFromClasses(k, feature_holder, classes)
plot.plot(mfccs, sones, eventBeginnings, centroids, inter_class_dist_matrix, classes)
def plot_hole_markers(course_id, round_id, hole):
query = """select lens, fov ,camera_x , camera_y , camera_z , target_x , target_y , target_z , roll from camera
where course_id = '%s' and hole = '%s' and camera_type = 'hole'""" % (
course_id, hole)
cursor.execute(query)
hole_info = cursor.fetchone()
query = """select tee_x, tee_y, tee_z, pin_x, pin_y, pin_z from hole_camera
where course_id = '%s' and hole = '%s' and round_id = '%s'""" % (
course_id, hole, round_id)
cursor.execute(query)
rows = cursor.fetchone()
tee = plotter.Vector(rows["tee_x"], rows["tee_y"], rows["tee_z"])
pin = plotter.Vector(rows["pin_x"], rows["pin_y"], rows["pin_z"])
tee = plotter.plot(tee, hole_info, 1024, 2256)
pin = plotter.plot(pin, hole_info, 1024, 2256)
query = """insert into tee_coordinate (hole, course_id, round_id, camera_mode, tee_px_x, tee_px_y) values (%s, '%s', %s, '%s', %s, %s) """ % (
hole, course_id, round_id, 'hole', tee[0], tee[1])
cursor.execute(query)
conn.commit()
return
query = """insert into pin_coordinate (hole, course_id, round_id, camera_mode, pin_px_x, pin_px_y) values (%s, '%s', %s, '%s', %s, %s) """ % (
hole, course_id, round_id, 'hole', pin[0], pin[1])
cursor.execute(query)
conn.commit()
def temporal_summation(num_pre = 3):
data = []
neuron_factory = NeuronFactory()
post_neuron_name = "Postsynaptic"
post_neuron = neuron_factory.create_neuron(probe_name=post_neuron_name)
pre_neuron_names = []
for i in xrange(num_pre):
pre_neuron_name = "Presynaptic %d" % i
pre_neuron_names.append(pre_neuron_name)
pre_neuron = neuron_factory.create_neuron(
neuron_type=NeuronTypes.GANGLION,
probe_name = pre_neuron_name)
synapse = neuron_factory.create_synapse(pre_neuron, post_neuron,
dendrite_strength=0.0015, axon_delay=500)
synapse.set_enzyme_concentration(0.5)
neuron_factory.register_driver(pre_neuron,
ActivationPulseDriver(activation=0.5, period=5000*(i+1),
length=1, delay=1000 + (100*i), record=True))
neuron_factory.step(args.iterations)
print("Saved %d out of %d cycles." % (neuron_factory.stable_count, neuron_factory.time))
for pre_neuron_name in pre_neuron_names:
data.append(neuron_factory.get_probe_data(pre_neuron_name))
data.append(neuron_factory.get_probe_data(post_neuron_name))
if not args.silent:
plot(data, title="Temporal summation test")
def compute_visibility(self):
# coord=SkyCoord(ra.flatten(),dec.flatten(),unit=u.deg)
# m=Visibility().for_time("2016-10-09T17:31:06",coord=coord)
# figure(figsize=(20,10))
# scatter(ra,dec,s=100,c=m,lw=0,alpha=0.4)
visibility = Visibility()
gwm = healpy.read_map(rootd + "/" + self.skymap)
nsides = healpy.npix2nside(gwm.shape[0])
vmap = visibility.for_time(self.utc, nsides=nsides)
healpy.mollview(
gwm * (vmap * 2 - 1),
title="visibility for INTEGRAL due to sun constrains\n" + self.utc)
healpy.projscatter(self.ra, self.dec, lonlat=True)
healpy.graticule()
plot.plot(self.dir + "/visibility.png")
healpy.write_map(self.dir + "/visibility.fits", vmap)
source_theta = (90 - self.dec) / 180 * pi
source_phi = (self.ra) / 180 * pi
visibility = dict(probability_visible=sum(gwm * vmap),
source_visible=vmap[healpy.ang2pix(
nsides, source_theta, source_phi)])
json.dump(visibility, open(self.dir + "/visibility.json", "w"))
def test1():
data = []
sample = []
num = 25 #number of elements
# Feature set containing (x,y) values of 25 known/training data
#Create arrays of 25x1 of the range (0, 99)
x = np.random.randint(0,100,(num,1)).astype(np.float32)
y = np.random.randint(0,100,(num,1)).astype(np.float32)
for i in range(0,num):
sample.append([x[i][0], y[i][0]])
arraynp = np.asarray(sample)
# Labels each one either Red or Blue with numbers 0 and 1
#Create array of data 25x1 fo the range 0,2
responses = np.random.randint(0,2,(num,1)).astype(np.float32)
"""Example for doing something awesome
plt.scatter(blue[:,0],blue[:,1],80,'b','s')
"""
#print sample
#print arraynp
#print len(arraynp)
data.append(arraynp[responses.ravel() ==1 ])
data.append(arraynp[responses.ravel() ==0 ])
p.plot(data)
def main():
cidades = []
pontos = []
with open('./data/chn31.tsp') as f: # leitura das cidades
for linha in f.readlines():
cidade = linha.split(' ')
cidades.append(
dict(index=int(cidade[0]), x=int(cidade[1]), y=int(cidade[2])))
pontos.append((int(cidade[1]), int(cidade[2])))
matriz_adjacencia = []
rank = len(cidades)
for i in range(rank): # calculo da matriz de adjacencia
linha = []
for j in range(rank):
linha.append(calc_distancia(cidades[i], cidades[j]))
matriz_adjacencia.append(linha)
aco = ACO(cont_formiga=100, geracoes=10, alfa=1.0, beta=10.0, ro=0.5, Q=10)
grafo = Grafo(matriz_adjacencia, rank)
try:
caminho, custo = aco.resolve(grafo)
print('custo total: {}, caminho: {}'.format(custo, caminho))
if args.plot:
plot(pontos, caminho)
except TypeError:
pass
def plot(self, subname, per_request=False):
plot.clear_plot()
if per_request:
plot.plot([
self._result['hour_statistic'][subname][x] /
self._result['hour_statistic']['requests'][x]
for x in sorted(self._result['hour_statistic'][subname].keys())
],
#fill=True
)
else:
plot.plot([
self._result['hour_statistic'][subname][x]
for x in sorted(self._result['hour_statistic'][subname].keys())
],
#fill=True
)
plot.width(int(tsz[0] * SIZE_GRAPH))
plot.height(int(tsz[1] * SIZE_GRAPH))
plot.nocolor()
plot.xlabel('hours')
plot.axes(True, False)
plot.show(tsz)
def main():
cities = []
cost_matrix = []
with open(settings.CITIES_DISTANCE) as f:
data = json.load(f)
for k, v in data.items():
x, y = v['point']
cities.append((y, x, k))
cost_matrix.append([city['distance'] for city in v['cities']])
aco = ACO(
ant_count=20,
run_without_improvement=20,
alpha=2,
beta=5,
rho=0.5,
q=5,
pheromone_strategy='ant_density')
graph = Graph(cost_matrix)
path, cost = aco.solve(graph)
print('cost: {}, path: {}'.format(cost, path))
plot(cities, path)
def main():
accounts = {}
accounts.update(
yahoo_finance.load("csv_files/yahoo_finance/xrp_usd.csv", "XRP/USD", 0,
3))
accounts.update(
yahoo_finance.load("csv_files/yahoo_finance/btc_usd.csv", "BTC/USD", 0,
20000))
accounts.update(
yahoo_finance.load("csv_files/yahoo_finance/eth_usd.csv", "ETH/USD", 0,
1400))
accounts.update(
yahoo_finance.load("csv_files/yahoo_finance/cad_usd.csv", "CAD/USD",
.5, 1))
accounts.update(
yahoo_finance.load("csv_files/yahoo_finance/gspc.csv", "S&P 500", 1500,
3500))
accounts.update(
big_query.load("csv_files/big_query/xrp_activity.csv",
"/r/XRP Activity", 0, 400))
# adds a line for total value of all accounts.
#create_total(accounts)
plot(accounts)
def initial_conditions(delta_x):
name = "initital_conditions"
r = 100.
vel = 16.
big_mass = 1000.
planets = []
planets.append(Planet([0., 0.], [0., 0.], big_mass, stationary=True))
planets.append(Planet([1.2 * r, 0.], [0., 0.], big_mass, stationary=True))
planets.append(
Planet([.6 * r, .6 * r], [0., 0.], big_mass, stationary=True))
probe = Planet([0.8 * r, 0., 0.4 * r], [-0.3 * vel, -0.2 * vel, 0.2 * vel],
0.)
probe2 = copy.deepcopy(probe)
probe2.pos[0] *= (1 + delta_x)
probe3 = copy.deepcopy(probe)
probe3.pos[0] *= (1 + delta_x**2)
planets.append(probe)
planets.append(probe2)
planets.append(probe3)
remove_momentum(planets)
centralize(planets)
dump_planets(planets, 1000., active_planets=3, one_over_r=False)
data = run_simulation(debug=False)
#np.savetxt("butterfly.txt", data, fmt='%.4f')
plot.plot(data, 1.5 * r, interval=1, disabled_trajectories=(-1, -2))
def main():
'''
Die Parameter werden beim Aufruf aus dem config-File abgerufen
usage: >> miniTopSim.py <ConfigFile>
'''
if(len(sys.argv) == 2 ):
configFileName = str(sys.argv[1])
else:
sys.stderr.write('Error: usage: '+ sys.argv[0] + ' <filename.cfg>')
sys.stderr.flush()
exit(2)
# Read the parameter file
par.init()
par.read(configFileName)
# Listen xvals und yvals werden erzeugt
xvals,yvals = init_values()
with open(par.INITIAL_SURFACE_FILE,"w") as file:
#Werte zum Zeitpunkt t=0
write(file, 0 , xvals,yvals)
# Start time measurement
startTime = time.clock()
SurfaceProcess(xvals,yvals,file)
# Stop time measurement and print it
endTime = time.clock()
print("Calculation Time: " + str(endTime - startTime) + " seconds")
plot.plot(par.INITIAL_SURFACE_FILE)
def generate_plot(dfs, initial_values, metric, race, district, subtract_1E5,
out_folder):
fig = plt.figure()
values = dfs[metric][race][district]
if subtract_1E5:
values = values - dfs[metric][race][district + '_1E5'].values
initial_value = initial_values[metric][race][district]
width = values.index[1] - values.index[0]
# inefficient to recompute this within the loop, but whatever.
x_bounds = [
get_x_bounds(values.index.values, values[district].values),
(99999999, initial_values[metric][race][district])
]
mins, maxes = zip(*x_bounds)
x_bounds = min(mins), 1.1 * max(maxes)
line_color = 'red' if district.endswith('Rep') else 'purple'
plot(values.index.values, values[district].values, x_bounds, width,
initial_value, line_color, fig)
sub15_string = '_sub1E5' if subtract_1E5 else ''
fn = '_'.join((metric, race, district)) + sub15_string + '.png'
plt.title(' - '.join((TITLES[district], race)))
plt.savefig(os.path.join(out_folder, fn))
plt.close()
def main():
N = 100
iterations = 1000
stateLookup = defaultdict(lambda: defaultdict(set))
nestLookup = {i: set() for i in range(M)}
ants = [Ant('exploration', 'at-nest', 0, 0, i, 0, None) for i in range(N)]
print(ants)
for ant in ants:
stateLookup[ant.state][ant.substate].add(ant.i)
nestLookup[ant.current].add(ant.i)
history = []
taskHistory = []
for _ in range(iterations):
ants = list(
map(lambda a: update(a, ants, stateLookup, nestLookup), ants))
history.append({k: len(v) for k, v in nestLookup.items()})
taskDict = {
k: sum(map(len, v.values()))
for k, v in stateLookup.items()
}
taskDict.update({k: 0 for k in states if k not in taskDict})
pprint(taskDict)
taskHistory.append(taskDict)
pprint(history)
pprint(taskHistory)
plot(history)
plot(taskHistory)
def transmit(strength=0.25, delays=[None, 100]):
data = []
neuron_factory = NeuronFactory()
dendrite_strength = 1
if args.silent:
pre_neuron = neuron_factory.create_neuron()
for delay in delays:
post_neuron = neuron_factory.create_neuron()
synapse = neuron_factory.create_synapse(pre_neuron, post_neuron,
delay=delay, strength=dendrite_strength)
else:
pre_neuron = neuron_factory.create_neuron(record=True)
post_neurons = []
for delay in delays:
post_neuron = neuron_factory.create_neuron(record=True)
post_neurons.append(post_neuron)
synapse = neuron_factory.create_synapse(pre_neuron, post_neuron,
delay=delay, strength=dendrite_strength)
neuron_factory.register_driver(pre_neuron,
PulseDriver(current=strength, period=100, length=1, delay=25))
neuron_factory.step(args.iterations)
#print("Saved %d out of %d cycles." % (neuron_factory.stable_count, neuron_factory.time))
if not args.silent:
data.append(("Pre neuron", pre_neuron.get_record()))
for post_neuron in post_neurons:
data.append(("Post neuron", post_neuron.get_record()))
plot(data, title="Synaptic transmission")
def main():
epochs=int(sys.argv[1])
print(epochs,' epochs')
X_train, y_train, X_val, y_val, X_test, y_test = load_data()
for i in range(0,1):
im.display_image(X_train[i,:],image_size)
g, X_train, y_train, X_val, y_val, X_test, y_test = preprocess_data(X_train, y_train, X_val, y_val, X_test, y_test)
print('X_train.shape ',X_train.shape,'y_train.shape ',y_train.shape)
print('X_val.shape ', X_val.shape, 'y_val.shape ', y_val.shape)
print('X_test.shape ', X_test.shape, 'y_test.shape ', y_test.shape)
# learn the model
model=make_model()
hist=fit(model , g, X_train, y_train, X_val, y_val, epochs)
print(hist.history)
# test the model
pred = predict(model,X_test,y_test)
accuracy=compute_accuracy(pred,y_test)
print('accuracy on test data: ',accuracy*100, '%')
show_results(pred,X_test,y_test)
# save learned weights
f="%d-%m-%y"
filename='record/weights-'+dt.date.today().strftime(f)
model.save_weights(filename,overwrite=True)
pl.plot(hist.history,len(hist.history['acc']))
os.system('./plot.sh')
def SGD(self, epochs, lr):
"""Train the neural network using mini-batch stochastic
gradient descent. The ``training_data`` is a list of tuples
``(x, y)`` representing the training inputs and the desired
outputs. The other non-optional parameters are
self-explanatory. If ``test_data`` is provided then the
network will be evaluated against the test data after each
epoch, and partial progress printed out. This is useful for
tracking progress, but slows things down substantially."""
n_test = len(self.test_data)
# n = len(self.training_data)
for j in range(epochs):
self.reset_grad()
for row in self.training_data:
self.backprop(row)
self.update_mini_batch(lr)
# print("Epoch {0}: {1}".format(j, self.evaluate(self.test_data) * 100 / n_test))
print("Epoch {0}: {1}".format(
j,
self.evaluate(self.test_data) * 100 / n_test))
result = []
for data in self.test_data:
x = 0
if self.feedforward(data) > 0.5:
x = 1
result.append([data[0], data[1], x])
x0, y0, x1, y1 = categorize_result(result)
plot(x0, y0, x1, y1)
def main():
sc = [0.05, 0.05, 10.0]
ns, ms = [], []
md1s, md2s = [], []
ints = []
end = '0'
while end == '0':
ns.append(int(input("Input N: ")))
ms.append(int(input("Input M: ")))
p = float(input("Enter parameter (tao): "))
md1s.append(
int(input("Outer integration mode (0 - Gauss, 1 - Simpson): ")))
md2s.append(
int(input("Inner integration mode (0 - Gauss, 1 - Simpson): ")))
lm = [[0, pi / 2], [0, pi / 2]]
ints.append(
inter.Integrator(lm, [ns[-1], ms[-1]], [md1s[-1], md2s[-1]]))
print("Result with {:.2f} as "
"a parameter is {:.7f}".format(p, ints[-1](p)))
end = input("Stop execution?: ")
plot.plot(ints, sc, ns, ms, md1s, md2s)
def kp(x, y, k, stop=100000, log=False, logFile=None, step=50, verbose=False):
n=len(x)
w=np.zeros(n)
b=y[0]
w[0] = y[0] #initialisation de w
ind=0
if ((not logFile) or (step <= 0)):
log=False
valeurs = [y[i]*(w[0]*k(x[i], x[0]) + b) for i in xrange(n)]
negatifs = [i for i in xrange(n) if valeurs[i] < 0]
while(negatifs and (stop > 0)):
if (log and not (ind % step)):
sFile=logFile+str(int(ind/step))+'.png'
sTitle='Kernel perceptron at '+str(ind)+'-th iteration'
plot.plot(x, y, np.dot(w, x), b, title=sTitle, saveFile=sFile, display=False)
if (verbose and not (ind % step)):
print 'itération : ', ind
j=negatifs[0]
w[j] = w[j] + y[j]
b = b + y[j]
deltaValeurs = [y[i]*(y[j]*k(x[i], x[j]) + y[j]) for i in xrange(n)]
valeurs=np.add(valeurs, deltaValeurs)
negatifs = [i for i in xrange(n) if valeurs[i] < 0]
stop -= 1
ind+=1
if (stop==0):
print 'Kernel perceptron didn\'t converge !'
return w, b, ind
def flatFieldScan(self, count=None):
try:
self._busy=True
if count is not None:
self.setRequiredPixelCountForFlatFieldCalibration(int(count))
self.prepareFlatFieldCollection()
print "starting 2 one minute scans to calculate how long to scan for a complete flat field calibration at energy %s" % str(self.energy.getPosition())
#collect two 1min frames
self.scanFlatField(2,self.quickscantime+10)
averagecount=averageScanRawCount(2, self.detector)
numberofscan=int(math.ceil(self.requiredpixelcount/averagecount*self.quickscantime/self.slowscantime))
print "starting %d flat field calibration scans. Total time to complete is %f seconds." % (numberofscan, (self.slowscantime+30)*numberofscan)
self.motor.setSpeed((float(self.getUpperGdaLimits()[0])-float(self.getLowerGdaLimits()[0]))/self.slowscantime)
self.scanFlatField(numberofscan, self.slowscantime+30)
print "Sum all scanned raw data into one flat field data file..."
self.sum_flat_field_file = sumScanRawData(numberofscan)
#plot and view flat field raw data in SWING GUI
try:
plot(RAW,self.sum_flat_field_file)
except:
print "Plot flat field data from .raw data file failed."
print "Unexpected error:", sys.exc_info()[0], sys.exc_info()[1] # @UndefinedVariable
print "Please check the flat field file for any dead pixels, etc.and check that all the bad channels are in the bed channel list at "+BAD_CHANNEL_LIST
#apply this flat field correction to PSD in GDA permanently
self.applyFlatFieldCalibration()
except:
print "Flat field Collection aborted."
print "Unexpected error:", sys.exc_info()[0], sys.exc_info()[1] # @UndefinedVariable
finally:
print "Flat Field Collection Completed."
self.stop()
self._busy=False
def clustering(args):
''' run clustering on a single k'''
print "Feature Analysis/Clustering Mode: single k"
feature_holder = featurevector.feature_holder(
filename=FEATURE_VECTOR_FILENAME)
sones_holder = featurevector.feature_holder(filename=SONE_VECTOR_FILENAME)
k = args.k
print feature_holder
mfccs = feature_holder.get_feature('mfcc')
print sones_holder
sones = sones_holder.get_feature('sones')
centroids, distortion = Get_Best_Centroids(k, 1)
print "Distortion for this run: %0.3f" % (distortion)
classes, dist = kmeans.scipy_vq(mfccs, centroids)
# Get the inter class dist matrix
inter_class_dist_matrix = mir_utils.GetSquareDistanceMatrix(centroids)
eventBeginnings = feature_holder.get_event_start_indecies()
# write audio if given -w
if args.plot_segments:
PlotWaveformWClasses(k, feature_holder, classes)
if args.write_audio_results:
WriteAudioFromClasses(k, feature_holder, classes)
plot.plot(mfccs, sones, eventBeginnings, centroids,
inter_class_dist_matrix, classes)
def main():
data = read()
red = list(filter(lambda x: x[4], data))
blue = list(filter(lambda x: not x[4], data))
plot.plot(list(map(lambda x: x[1], red)), list(map(lambda x: x[2], red)),
list(map(lambda x: x[3], red)), list(map(lambda x: x[1], blue)),
list(map(lambda x: x[2], blue)), list(map(lambda x: x[3], blue)))
def scan(self):
initial_setpoint = self._get_control_f()
scan_min = max(self._min_control,initial_setpoint - self._scan_range/2.)
scan_max = min(self._max_control,initial_setpoint + self._scan_range/2.)
steps=int((scan_max - scan_min) / self._control_step_size)
print initial_setpoint,scan_min,scan_max, steps
udrange=np.append(np.linspace(initial_setpoint,scan_min,int(steps/2.)),
np.linspace(scan_min, scan_max, steps))
udrange=np.append(udrange,np.linspace(scan_max,initial_setpoint,int(steps/2.)))
values=np.zeros(len(udrange))
true_udrange=np.zeros(len(udrange))
for i,sp in enumerate(udrange):
#print 'sp',sp
self._set_control_f(sp)
qt.msleep(self._dwell_time)
true_udrange[i]=self._get_control_f()
values[i]=self.get_value()
valid_i=np.where(values>self._min_value)
if self.get_do_plot():
p=plt.plot(name=self._plot_name)
p.clear()
plt.plot(true_udrange[valid_i],values[valid_i],'O',name=self._plot_name)
return (true_udrange[valid_i],values[valid_i])
def plotTriage(tests=["RAMINDEX", "KCOV"]):
data = {}
for test in tests:
#__data, minimizeAttempts = loadDataCached('triage_%s.cache', test, __processTest);
__data, minimizeAttempts = __processTest(test)
print(len(__data), __data[-1] if len(__data) > 0 else -1)
# Triaging
data = {
"Total":
[(v["executeCount"], v["ts"], v["triagingTotal"]) for v in __data],
"Wasted":
[(v["executeCount"], v["ts"], v["triagingFail"]) for v in __data],
}
plot(data,
0,
2,
xlabel="Programs executed",
ylabel="Number",
title="",
outfile="triage_total_%s.png" % test)
# Minimization total
if "Default" in test:
print(test)
# MLMinimize(minimizeAttempts)
# analyzeMinimize(test, minimizeAttempts)
exit()
def state_callback(self, t, dt, linear_velocity, yaw_velocity):
'''
called when a new odometry measurement arrives approx. 200Hz
:param t - simulation time
:param dt - time difference this last invocation
:param linear_velocity - x and y velocity in local quadrotor coordinate frame (independet of roll and pitch)
:param yaw_velocity - velocity around quadrotor z axis (independent of roll and pitch)
:return tuple containing linear x and y velocity control commands in local quadrotor coordinate frame (independent of roll and pitch), and yaw velocity
'''
self.t = t
self.x = self.predictState(dt, self.x, linear_velocity, yaw_velocity)
F = self.calculatePredictStateJacobian(dt, self.x, linear_velocity, yaw_velocity)
self.sigma = self.predictCovariance(self.sigma, F, self.Q);
self.verify_wp()
self.visualizeState()
wp = self.next_wp()
if wp is not None:
controls = np.array([20.0, 0.0]).T, self.Kp_psi * (-self.x[2, 0])
else:
controls = np.zeros(2,1), 0.0
#plot("x", self.x[0, 0])
plot("vx", linear_velocity[0])
#print controls[0], controls[1]
return controls
def run(num_cities):
cities = []
points = []
with open('./data/chn31.txt') as f:
counter = 0
for line in f.readlines():
if counter < num_cities:
city = line.split(' ')
cities.append(
dict(index=int(city[0]), x=int(city[1]), y=int(city[2])))
points.append((int(city[1]), int(city[2])))
counter += 1
cost_matrix = []
rank = len(cities)
for i in range(rank):
row = []
for j in range(rank):
row.append(distance(cities[i], cities[j]))
cost_matrix.append(row)
aco = ACO(10, 100, 1.0, 10.0, 0.5, 10, 2)
graph = Graph(cost_matrix, rank)
path, cost = aco.solve(graph)
print('number cities: {},cost: {}, path: {}'.format(
num_cities, cost, path))
plot(points, path)
return path, cost
def main():
print('Start!')
cities = []
points = []
print('Reading graph')
with open('input/att48.txt') as f:
for line in f.readlines():
city = line.split(' ')
cities.append(City(int(city[1]), int(city[2])))
points.append((int(city[1]), int(city[2])))
cost_matrix = []
rank = len(cities)
for i in range(rank):
row = []
for j in range(rank):
row.append(cities[i].distance(cities[j]))
cost_matrix.append(row)
aco = ACS_HMM(n=1000, m=10, alpha=0.1, beta=5, rho=0.1, phi=0.1, q_zero=0.9)
graph = Graph(cost_matrix, rank)
print('Solving TSP-ACS-HMM')
start_time = time.time()
path, cost = aco.solve(graph)
print("--- %s seconds ---" % (time.time() - start_time))
print('Final cost: {}'.format(cost))
print('Path: {}'.format(path))
plot(points, path)
def transmit(strengths=[-255, -100, -50, -10, 0]):
data = []
neuron_factory = NeuronFactory()
dendrite_strength = 100
if args.silent:
photoreceptor = neuron_factory.create_neuron(neuron_type=NeuronTypes.PHOTORECEPTOR)
horizontal = neuron_factory.create_neuron(neuron_type=NeuronTypes.HORIZONTAL)
synapse = neuron_factory.create_synapse(photoreceptor, horizontal,
dendrite_strength=dendrite_strength)
else:
photoreceptor = neuron_factory.create_neuron(neuron_type=NeuronTypes.PHOTORECEPTOR, record=True)
horizontal = neuron_factory.create_neuron(neuron_type=NeuronTypes.HORIZONTAL, record=True)
synapse = neuron_factory.create_synapse(photoreceptor, horizontal,
dendrite_strength=dendrite_strength)
synapse = neuron_factory.create_synapse(horizontal, photoreceptor,
transporter=Transporters.GABA, receptor=Receptors.GABA,
dendrite_strength=dendrite_strength)
for strength in strengths:
driver = ConstantDriver(current=strength, delay=100)
neuron_factory.register_driver(photoreceptor, driver)
neuron_factory.step(args.iterations)
#print("Saved %d out of %d cycles." % (neuron_factory.stable_count, neuron_factory.time))
if not args.silent:
data.append(("Photoreceptor", photoreceptor.get_record()))
data.append(("Horizontal Cell", horizontal.get_record()))
plot(data, title="Horizontal Cell Test")
def onSyncDone(sync_result, sl, t0, plop_collector, theseus):
# TODO should write this to a result file
print "GOT SYNC RESULT: ", sync_result
t1 = datetime.now()
if sl:
sl.stop()
if plop_collector:
from plop.collector import PlopFormatter
formatter = PlopFormatter()
plop_collector.stop()
if not os.path.isdir('profiles'):
os.mkdir('profiles')
with open('profiles/plop-sync-%s' % GITVER, 'w') as f:
f.write(formatter.format(plop_collector))
if theseus:
with open('callgrind.theseus', 'wb') as outfile:
theseus.write_data(outfile)
theseus.uninstall()
delta = (t1 - t0).total_seconds()
# TODO should write this to a result file
print "[+] Sync took %s seconds." % delta
reactor.stop()
if args.do_plot:
from plot import plot
plot(args.logfile)
def performIRL(method, trajectoryPerClusterWeight):
#theta = maxent.irl(feature_matrix, gw.n_actions, discount,
#gw.transition_probability, trajectories, epochs, learning_rate,trajectoryPerClusterWeight)
if (method == "linear"):
print("linear method")
theta = maxent.irl(feature_matrix, ow.n_actions, discount,
ow.transition_probability, trajectories, epochs,
learning_rate, trajectoryPerClusterWeight)
elif (method == "deep"):
print("deep method")
l1 = l2 = 0
theta = deep_maxent.irl(
(feature_matrix.shape[1], ) + network_structure,
feature_matrix,
ow.n_actions,
discount,
ow.transition_probability,
trajectories,
epochs,
learning_rate,
trajectoryPerClusterWeight,
l1=l1,
l2=l2)
recovered_reward = feature_matrix.dot(theta).reshape((n_states, ))
scaler = StandardScaler()
standardised_reward = scaler.fit_transform(recovered_reward.reshape(-1, 1))
plot.plot(ground_r, standardised_reward, grid_size)
return theta
def main():
methods = {
'insert_sort': insert_sort,
'bubble_sort': bubble_sort,
'selection_sort': selection_sort,
'quick_sort': quick_sort,
'merge_sort': merge_sort,
'heap_sort': heap_sort,
'shell_sort': shell_sort,
'counting_sort': counting_sort,
'radix_sort': radix_sort,
'bucket_sort': bucket_sort
}
method_time = {}
for method_name in methods:
elapsed_times = 0
for i in range(100):
np.random.seed(seed=i)
datas = list(np.random.randint(0, 500, 1000))
start = time.time()
methods[method_name](datas)
end = time.time()
elapsed_times += end - start
print("{0} mean_elapsed_time:{1}".format(method_name, elapsed_times /
100) + "[sec]")
method_time[method_name[:-5]] = round(elapsed_times, 3)
plot(method_time)
def main():
env_name = file_name = "Environments/Banana_Linux/Banana.x86_64"
train_mode = True # Whether to run the environment in training or inference mode
env = UnityEnvironment(file_name=env_name, no_graphics=False)
# env = UnityEnvironment(file_name="/data/Banana_Linux_NoVis/Banana.x86_64")
# Set the default brain to work with
brain_name = env.brain_names[0]
brain = env.brains[brain_name]
env_info = env.reset(train_mode=True)[brain_name]
# Action and Observation spaces
nA = brain.vector_action_space_size
nS = env_info.vector_observations.shape[1]
print('Observation Space {}, Action Space {}'.format(nS, nA))
seed = 7
agent = Priority_DQN(nS, nA, seed, UPDATE_EVERY, BATCH_SIZE, BUFFER_SIZE,
MIN_BUFFER_SIZE, LR, GAMMA, TAU, CLIP_NORM, ALPHA)
agent.qnetwork_local.load_state_dict(torch.load('checkpoint.pth'))
# scores = train(agent,env,brain_name)
for i in range(1):
state = env.reset()
img = plt.imshow(env.render(mode='rgb_array'))
for j in range(500):
action = agent.act(state)
img.set_data(env.render(mode='rgb_array'))
plt.axis('off')
display.display(plt.gcf())
display.clear_output(wait=True)
state, reward, done, _ = env.step(action)
# save the image
plt.savefig('test' + str(j) + '.png', bbox_inches='tight')
if done:
break
# plot the scores
plot(scores)
def plotCorrDiff(array1, array2, title, filepath):
"""
A function to produce plots of correlation differences.
Parameters:
-----------
array1 : observational dataset. Output of corr()
array2 : modelled dataset. Output of corr()
"""
corrDiff_array = corrDiff(array1, array2)
if corrDiff_array != None:
Dict6 = mapCorr()
myplot = plot(corrDiff_array,
Dict6,
labels=False,
grid=False,
oceans=False,
cbar=True)
reload(maps_sub)
from maps_sub import saveFig
saveFig(myplot, title, filepath)
else:
array = np.zeros((27, 22))
Dict6 = mapCorr()
myplot = plot(array,
Dict6,
labels=False,
grid=False,
oceans=False,
cbar=True)
reload(maps_sub)
from maps_sub import saveFig
saveFig(myplot, title, filepath)
return
def onSyncDone(sync_result, sl, t0, plop_collector, theseus):
# TODO should write this to a result file
print "GOT SYNC RESULT: ", sync_result
t1 = datetime.now()
if sl:
sl.stop()
if plop_collector:
from plop.collector import PlopFormatter
formatter = PlopFormatter()
plop_collector.stop()
if not os.path.isdir('profiles'):
os.mkdir('profiles')
with open('profiles/plop-sync-%s' % GITVER, 'w') as f:
f.write(formatter.format(plop_collector))
if theseus:
with open('callgrind.theseus', 'wb') as outfile:
theseus.write_data(outfile)
theseus.uninstall()
delta = (t1 - t0).total_seconds()
# TODO should write this to a result file
print "[+] Sync took %s seconds." % delta
reactor.stop()
if args.do_plot:
from plot import plot
plot(args.logfile)
def state_callback(self, t, dt, linear_velocity, yaw_velocity):
'''
called when a new odometry measurement arrives approx. 200Hz
:param t - simulation time
:param dt - time difference this last invocation
:param linear_velocity - x and y velocity in local quadrotor coordinate frame (independet of roll and pitch)
:param yaw_velocity - velocity around quadrotor z axis (independet of roll and pitch)
:return tuple containing linear x and y velocity control commands in local quadrotor coordinate frame (independet of roll and pitch), and yaw velocity
'''
self.x = self.predictState(dt, self.x, linear_velocity, yaw_velocity)
F = self.calculatePredictStateJacobian(dt, self.x, linear_velocity,
yaw_velocity)
self.sigma = self.predictCovariance(self.sigma, F, self.Q)
position = self.x[0:2]
markers = self.get_markers()
self.target_marker_index = self.update_target_marker_index(
markers, self.target_marker_index, position)
desired_velocity = self.compute_desired_velocity(
markers, self.target_marker_index, position, linear_velocity)
u = self.compute_control_command(
t, dt, position, linear_velocity,
np.array([markers[self.target_marker_index]]).T, desired_velocity)
u_yaw = self.compute_yaw_control_command(t, dt, self.x[2],
yaw_velocity, 0, 0)
plot("x command", u[0])
self.visualizeState()
return u, u_yaw
def plotter(time, domain, data_path=None, ids=None):
if data_path is None:
data_path = base_data_path + '/' + time[:-3]
if not os.path.exists(data_path):
os.makedirs(data_path)
plot_time = parse_time(time)
#run_time = plot_time - timedelta(hours=1)
_file = download_era5(plot_time, data_path, domain)
_radar_file = download_radar(plot_time, data_path)
# Determine what data needs to be plotted and passed
#data = pygrib.open(_file)
#lats, lons = data[1].latlons()
data = xr.open_dataset(_file)
lats = data.latitude.values
lons = data.longitude.values
lons, lats = np.meshgrid(lons, lats)
if domain is not None:
plot_bounds = domains[domain]
plot(data, lons, lats, plot_bounds, domain, plot_time, _radar_file)
if ids is not None:
try:
ids = ids.strip().split(',')
except:
raise ValueError(
"Improperly formatted sounding locations: ORD,MDW,DPA")
print(ids)
get_soundings(data, ids, lats, lons, plot_time)
return
def main():
cities = []
points = []
# Se lee el archivo .txt se encuentran en orden: el índice de la ciudad, su coordenada en X y su coordenada en Y
with open(
'/home/juancm/Desktop/Octavo/Tesis/ProyectoGrado/Metaheuristicas/ant-colony-tsp/ant-colony-tsp/data/chn31.txt'
) as f:
for line in f.readlines():
city = line.split(' ')
cities.append(
dict(index=int(city[0]), x=int(city[1]), y=int(city[2])))
points.append((int(city[1]), int(city[2])))
# Se genera la matriz de costos a partir de los nodos y las coordenadas leídas
cost_matrix = []
rank = len(cities)
for i in range(rank):
row = []
for j in range(rank):
row.append(distance(cities[i], cities[j]))
cost_matrix.append(row)
# Se instancia ACO, en donde se envía como parámetro: la cantidad de ants, el número de generaciones, alpha, beta, rho, Q, Estrategia para calccular T(i,j)
aco = ACO(10, 100, 1.0, 10.0, 0.5, 10, 2)
graph = Graph(cost_matrix, rank)
path, cost = aco.solve(graph)
print('cost: {}, path: {}'.format(cost, path))
plot(points, path)
def plotCorpus(tests=["KCOV", "RAMINDEX"]):
datas = {}
tmax = 0
cmax = 0
for test in tests:
data = {}
#__data, t, c = __processTest(test);
__data, t, c = loadDataCached("corpus_%s.cache", test, __processTest)
tmax = max(tmax, t)
cmax = max(cmax, c)
if len(__data) < 1:
continue
data[test] = [(v[0], v[1], v[2]) for v in __data]
data[test + " FP"] = [(v[0], v[1], v[3]) for v in __data]
datas[test] = data
for test in datas:
datas[test][test].insert(0, (0, 0, 0))
datas[test][test + " FP"].insert(0, (0, 0, 0))
datas[test][test].append((cmax, tmax, datas[test][test][-1][2]))
datas[test][test + " FP"].append(
(cmax, tmax, datas[test][test + " FP"][-1][2]))
plot(datas[test],
1,
2,
xlabel="Time elapsed (s)",
ylabel="# of corpus",
title="",
outfile="corpus_%s.png" % test,
xmax=tmax)
def test_grid(image=simple_image):
height = len(image)
width = len(image[0])
neuron_factory = NeuronFactory(num_threads=1)
neuron_grid = neuron_factory.create_neuron_grid(width, height, base_current=0.0)
neuron_data = []
for i in xrange(height):
for j in xrange(width):
neuron_factory.register_driver(
neuron_grid[i][j],
ConstantDriver(activation=image[i][j]))
for _ in xrange(args.iterations):
neuron_data.append(neuron_grid[0][0].soma.get_scaled_voltage())
neuron_factory.step()
neuron_factory.close()
activity = []
for row in neuron_grid:
activity += \
[neuron.soma.get_scaled_voltage()
for neuron in row]
print(activity)
im = Image.new('L', (width, height))
im.putdata(activity)
im.save('test.png')
if not args.silent:
plot([("neuron", neuron_data)], title="Photoreceptor test")
def main():
cities = []
points = []
with open('./data/ulysses16.tsp') as f:
for line in f.readlines():
#print(line)
city = line.split(' ')
#print(city)
cities.append(dict(index=float(city[0]), x=float(city[1]), y=float(city[2])))
#print(cities)
points.append((float(city[1]), float(city[2])))
cost_matrix = []
rank = len(cities)
#print(rank)
for i in range(rank):
row = []
for j in range(rank):
row.append(distance(cities[i], cities[j]))
cost_matrix.append(row)
#print('cost_matrix',cost_matrix)
aco = ACO(100,1, 1.0, 10.0, 0.5, 10, 2)
graph = Graph(cost_matrix, rank)
path, cost = aco.solve(graph)
cost=cost+cost_matrix[path[-2]][path[-1]]
print('cost: {}, path: {}'.format(cost, path))
plot(points, path)
def train(self):
"""
We stack and store the stacks as observations for critic training,
but keep the states and next states seperate for actor actions.
"""
tic = time.time()
means = []
stds = []
steps = 0
scores_window = deque(maxlen=100)
for e in range(1, self.episodes):
self.noise.step()
episode_scores = []
obs = self.env.reset()
for t in range(self.tmax):
actions = self.act(obs)
next_obs, rewards, dones = self.env.step(actions)
# Store experience
if np.max(rewards) > 0:
print('hit the ball over the net', rewards)
self.R.add(obs.reshape(1, 48), obs, actions, rewards,
next_obs.reshape(1, 48), next_obs, dones)
obs = next_obs
# Score tracking
episode_scores.append(np.max(rewards))
# Learn
if len(self.R) > self.min_buffer_size:
for _ in range(self.SGD_epoch):
# Update each agent
for i in range(self.num_agents):
self.learn(i)
# update target networks
self.update_targets_all()
steps += int(t)
means.append(np.mean(episode_scores))
stds.append(np.std(episode_scores))
scores_window.append(np.sum(episode_scores))
if e % 4 == 0:
toc = time.time()
r_mean = np.mean(scores_window)
r_max = max(scores_window)
r_min = min(scores_window)
r_std = np.std(scores_window)
plot(self.name, means, stds)
print(
"\rEpisode: {} out of {}, Steps {}, Rewards: mean {:.2f}, min {:.2f}, max {:.2f}, std {:.2f}, Elapsed {:.2f}"
.format(e, self.episodes, steps, r_mean, r_min, r_max,
r_std, (toc - tic) / 60))
if np.mean(scores_window) > self.winning_condition:
print('Env solved!')
# save scores
pickle.dump([means, stds],
open(str(self.name) + '_scores.p', 'wb'))
# save policy
self.save_weights(self.critic_path, self.actor_path)
break
def run():
def noise(sigma):
import numpy
return numpy.random.normal(0, sigma, 1).item(0) if sigma > 0 else 0;
import math
from plot import plot
u = 0
m = 2.0 # mass
x = 0
vx = 0
ax = 0
t = 0
t_max = 30
dt = 0.01
steps = int(t_max / dt) + 1;
setpoint = 5
measurement_noise = 0.03 if enable_noise else 0
measurement_delay = 20 if enable_delay else 1
control_noise = 0.0
control_delay = measurement_delay
u_limit = 100
x_measurements = [x + noise(measurement_noise) for i in range(measurement_delay)]
vx_measurements = [vx + noise(measurement_noise) for i in range(measurement_delay)]
control = [0] * control_delay;
user = UserCode()
stable_t = t_max;
overshoot = 0
for i in range(steps):
current = x_measurements.pop(0)
vel = vx_measurements.pop(0)
control.append(user.compute_control_command(t, dt, current, setpoint) + noise(control_noise))
diff = setpoint - current;
diff_norm = math.sqrt(diff * diff);
if(diff_norm > 3.5 * measurement_noise + 0.01):
stable_t = t;
overshoot = max(overshoot, max(current - setpoint, 0));
u = max(min(control.pop(0), u_limit), -u_limit) # input = force
t += dt;
x += dt * vx
vx += dt * ax
ax = u / m
x_measurements.append(x + noise(measurement_noise))
vx_measurements.append(vx + noise(measurement_noise))
plot("x_measured", x)
plot("x_desired", setpoint)
print "stable after:", stable_t, "overshoot:", overshoot
return (stable_t, overshoot)
def measurement_callback(self, t, dt, navdata):
'''
:param t: time since simulation start
:param dt: time since last call to measurement_callback
:param navdata: measurements of the quadrotor
'''
# add your plot commands here
plot("roll", navdata.rotX);
def optimize_matisse(self,lt1_optimize, lt2_optimize):
print 'Optimizing Matisse'
#scan the matise in the preset range around the current setpoint, find optima for lt1 and lt2 cr counts
optimum_lt1=-1.0
optimum_lt2=-1.0
initial_setpoint = self._ins_pidmatisse.get_setpoint()
self._get_input_values()
qt.msleep(self._par_mat_wait_time)
dt, cr_checks_lt1, cr_cts_lt1, cr_failed_lt1, cr_checks_lt2, cr_cts_lt2, cr_failed_lt2, tpqi_starts, tail_cts = self._get_input_values()
initial_cr_cts_per_check_lt1=-1.0
if cr_checks_lt1>0: initial_cr_cts_per_check_lt1=cr_cts_lt1/cr_checks_lt1
initial_cr_cts_per_check_lt2=-1.0
if cr_checks_lt2>0: initial_cr_cts_per_check_lt2=cr_cts_lt2/cr_checks_lt2
lt1_cts_per_check=[]
lt2_cts_per_check=[]
freq_scan_min = max(self._par_min_setpoint_mat,initial_setpoint - self._par_mat_scan_range/2.)
freq_scan_max = min(self._par_max_setpoint_mat, initial_setpoint + self._par_mat_scan_range/2.)
self._ins_pidmatisse.set_setpoint(freq_scan_min)
qt.msleep(6.*self._par_mat_wait_time)
self._get_input_values()
for freq in linspace(freq_scan_min, freq_scan_max, int((freq_scan_max - freq_scan_min) / self._par_mat_stepsize)):
self._ins_pidmatisse.set_setpoint(freq)
qt.msleep(self._par_mat_wait_time*.5)
cur_freq=freq
if not(self._func_matisse_freq == None): cur_freq = (self._func_matisse_freq() - self._ins_pidmatisse.get_value_offset())* self._ins_pidmatisse.get_value_factor()
qt.msleep(self._par_mat_wait_time*.5)
dt, cr_checks_lt1, cr_cts_lt1, cr_failed_lt1, cr_checks_lt2, cr_cts_lt2, cr_failed_lt2, tpqi_starts, tail_cts = self._get_input_values()
if cr_checks_lt1>0: lt1_cts_per_check.append((cr_cts_lt1/cr_checks_lt1,cur_freq))
if cr_checks_lt2>0: lt2_cts_per_check.append((cr_cts_lt2/cr_checks_lt2,cur_freq))
print 'Initial cr_cts_per_check: lt1:',initial_cr_cts_per_check_lt1, 'lt2:', initial_cr_cts_per_check_lt2
#print 'Scan: lt1:', lt1_cts_per_check ,'lt2:', lt2_cts_per_check
self._ins_pidmatisse.set_setpoint(initial_setpoint)
if ((lt1_optimize) and (len(lt1_cts_per_check)>0) and (max(lt1_cts_per_check)[0] >= initial_cr_cts_per_check_lt1)):
#if self._par_fit:
# print 'Fitting not yet implemented'
# pass
# #a, xc, k = copysign(max(y), V_max + V_min), copysign(.5, V_max + V_min), copysign(5., V_max + V_min)
# #fitres = fit.fit1d(x,y, common.fit_AOM_powerdependence, a, xc, k, do_print=True, do_plot=False, ret=True)
optimum_lt1=max(lt1_cts_per_check)[1]
print 'Setting new setpoint matisse:', optimum_lt1
self._ins_pidmatisse.set_setpoint(optimum_lt1)
if ((lt2_optimize) and (len(lt2_cts_per_check)>0) and (max(lt2_cts_per_check)[0] >= initial_cr_cts_per_check_lt2)):
optimum_lt2=max(lt2_cts_per_check)[1]
self._plt.clear()
self._plt=plt.plot(lt2_cts_per_check)
self._plt=plt.plot(lt1_cts_per_check)
qt.msleep(4.*self._par_mat_wait_time)
return optimum_lt1, optimum_lt2
def plots(startNumber, endNumber, commonSuffix="mythen_summed.dat", dataType=PSD):
firstPlot=True
datadir=PathConstructor.createFromDefaultProperty()
for filenumber in range(startNumber, endNumber+1):
filename=str(filenumber)+"-"+commonSuffix
if firstPlot:
plot(dataType, os.path.join(datadir,filename))
firstPlot=False
else:
plotover(dataType, os.path.join(datadir,filename))
def test(): import numpy as np import plot as p; reload(p) data = np.random.rand(100,200); p.plot(data, 'test') reload(p) pts = np.random.rand(10000,3); p.plot3d(pts);
def test2():
#All the sample
data = load_data_set("../flowers.csv")
#The training set is going to be the 99 %
training_set = get_training_set(0.99, data)
#The test set
test_set = get_test_set(training_set, data)
#This give me the kind of plants
kind_of_plants = data["Family"].unique()
"""This prints the data per family
for k in kind_of_plants:
print (k)
print (data[data["Family"] == k])
"""
k= 3
#This columns are the selected features for doing the euclidean distance.
#columns = ["a", "b", "c", "d"]
columns = ["a", "b"]
predictions = knn(training_set, test_set, k, columns)
get_locations_neighbors(predictions, columns)
""" Print the data classified by the selected columns
for k in kind_of_plants:
print (k)
sol = data[data["Family"] == k]
print sol[columns]
"""
#Only it's possible to plot in 2d on this project
if (len(columns) == 2):
data_plot = []
#Add to the plot data refers to the training data
for k in kind_of_plants:
sol = training_set[training_set["Family"] == k]
data_plot.append(sol.as_matrix(columns))
#Add to the plot data referst to the test data
for k in kind_of_plants:
sol = test_set[test_set["Family"] == k]
data_plot.append(sol.as_matrix(columns))
p.plot(data_plot)
def output_plots(self, plotdir):
benchmap = self.benchmap
benchnames = benchmap.values()
benchnames.sort()
benchinv = {}
for k, v in benchmap.items():
benchinv[v] = k
for o in self.out_plots:
basename = o[0]
cfglist = o[1]
clist = []
for cfgspec in cfglist:
r = re.compile('^' + cfgspec.replace('*', '.*') + '$')
for c in self.configlist:
if r.match(c): clist.append(c)
metric = o[2]
popt = {'AVG': False, 'GEOMEAN': False}
for opt in o[3]:
popt[opt] = True
data = []
for benchname in benchnames:
bench = benchinv[benchname]
if bench in self.badbenches: continue
if not self.vals.has_key(bench): continue
row = [bench]
for c in clist:
keyname = c + '.' + metric
if self.vals[bench].has_key(keyname):
val = self.vals[bench][keyname]
else:
val = None
if val == None: val = 0.0
row.append(val)
data.append(row)
data = plot.add_avg(data, popt['AVG'], popt['GEOMEAN'])
if len(o) > 4:
opts = o[4]
else:
opts = {}
plot.write_gnuplot_file(plotdir + '/' + basename, clist, metric, metric, opts)
plot.write_data_file(plotdir + '/' + basename, data, clist)
plot.plot(plotdir + '/' + basename)
def plotMetricsOnceOverPeriod(self, metrics, days, startdate=datetime.datetime.today()):
dates, lines = self.evaluateMetricsOverPeriod(metrics, startdate, days)
linelist = [
(lines['Net Worth'], 'g-'),
(lines['Net Assets'], 'b-'),
(lines['Net Liabilities'], 'r-'),
]
plot.plot(dates, linelist)
return lines['Net Worth'].pop()
def main():
'''
Es handelt sich um Isotropes Aetzen einer Oberflaeche entlang der Winkelsymmetrale (1nm/s):
Es werden zwei Parameter ueber die command line uebergegeben, die Zeit t ueber die
geaetzt wird und die Zeitschrittweite dt.
usage: >> miniTopSim.py t dt
Außerdem werden die Koordinaten ins eine Datei geschrieben in dem Format:
surface: time, npoints, x-positions y-positions
x[0] y[0]
x[1] y[1]
...
x[npoints-1] y[npoints-1]
'''
# Falls weniger oder mehr als zwei parameter uebergegeben werden,
# kommt eine Fehlermeldung die Die richtige Eingabe deutet
if(len(sys.argv) == 2 ):
configFileName = str(sys.argv[1])
else:
sys.stderr.write('Error: usage: '+ sys.argv[0] + ' <filename.cfg>')
sys.stderr.flush()
exit(2)
# Read the parameter file
par.init()
par.read(configFileName)
# Listen xvals und yvals werden erzeugt
xvals,yvals = init_values(par.XMIN, par.XMAX, par.DELTA_X)
# Die Oberflaeche zum Zeipunkt t=0 wird geplotet
# plotten(xvals,yvals,'bo-','Anfangszeitpunkt')
# Es wird ein File erzeugt mit der Name 'basic_t_dt.srf', wobei t und dt durch
# die Tatsaechliche Zeit und Zeitschrittweite ersetz werden. Außerdem wird in die Datei
# die Oberflaeche zum Zeitpunkt t=0 reingeschrieben (xvals und yvals in spalten)
file = open('basic_{0}_{1}.srf'.format(par.TOTAL_TIME, par.TIME_STEP),"w")
write(file, 0 , xvals,yvals)
aetzen(file, par.TOTAL_TIME, par.TIME_STEP, xvals, yvals)
file.close()
# Die Oberflaeche zum Endzeitpunkt wird geplotet
# plotten(xvals,yvals,'ro-','Endzeitpunkt')
fname = 'basic_{0}_{1}.srf'.format(par.TOTAL_TIME, par.TIME_STEP)
plot.plot(fname)
def external_current(rs=[-5, 2, 3, 5]):
data = []
for r in rs:
neuron_factory = NeuronFactory()
neuron = neuron_factory.create_neuron(record=True)
neuron_factory.register_driver(neuron,
PulseDriver(current=r, period=1, length=1, delay=args.iterations/10))
neuron_factory.step(args.iterations)
data.append(("Current %f" % r, neuron.get_record()))
if not args.silent:
plot(data, title="External current")
def testClassification(sampleSize,x,y,w):
goodC = 0
badC = 0
for i in xrange(2*sampleSize):
# print classify(x[i],w),y[i]
# print "valeur: ", printClassify(x[i],w)
if classify(x[i],w)==y[i]:
goodC +=1
else:
badC += 1
# print "Good : ", goodC
# print "Bad : ", badC
print "rate : ", goodC/sampleSize/2
plot.plot(x, y, w[:-1], w[-1])
def external_current(rs=[-2, -1, 0, 1]):
data = []
for r in rs:
neuron_factory = NeuronFactory()
neuron_name = "current: %f" % r
neuron = neuron_factory.create_neuron(probe_name=neuron_name)
neuron_factory.register_driver(neuron,
CurrentPulseDriver(current=r, period=1, length=1, delay=args.iterations/10))
neuron_factory.step(args.iterations)
data.append(neuron_factory.get_probe_data(neuron_name))
if not args.silent:
plot(data, title="External current")