def test_house():
c = plotille.Canvas(width=40, height=20)
c.rect(0.1, 0.1, 0.6, 0.6)
c.line(0.1, 0.1, 0.6, 0.6)
c.line(0.1, 0.6, 0.6, 0.1)
c.line(0.1, 0.6, 0.35, 0.8)
c.line(0.35, 0.8, 0.6, 0.6)
expected = """⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⠔⠊⠈⠒⢄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⡠⠒⠁⠀⠀⠀⠀⠀⠑⠢⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⢀⠔⠊⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠒⢄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⣠⣒⣁⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣑⣢⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡏⠢⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡠⠊⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡇⠀⠈⠢⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡠⠊⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡇⠀⠀⠀⠈⠢⡀⠀⠀⠀⠀⠀⠀⠀⡠⠊⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠈⠢⡀⠀⠀⠀⡠⠊⠀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠈⠢⡠⠊⠀⠀⠀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⡠⠊⠈⠢⡀⠀⠀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⡠⠊⠀⠀⠀⠀⠈⠢⡀⠀⠀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡇⠀⠀⠀⡠⠊⠀⠀⠀⠀⠀⠀⠀⠀⠈⠢⡀⠀⠀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡇⠀⡠⠊⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠢⡀⠀⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⣧⣊⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣀⣈⣢⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀"""
assert expected == c.plot()
print(c.plot())
def _plot_polar_azimuth_elevation(azimuth_series: Sequence[float], elevation_series: Sequence[float],
width=50, height=20):
'''
Plot azimuth/elevation polar chart.
Chart has auxiliary lines on -90, -60, -30, 30, 60, 90 degrees.
AOS point is highlighted in red.
'''
# Max values is increased by 0.05. Without it points with any coordinate
# eqauls max were not drawn.
xmin, xmax, ymin, ymax = -1, 1.05, -1, 1.05
canvas = plotille.Canvas(width, height, xmin=xmin, xmax=xmax, ymin=ymin, ymax=ymax, color_mode="byte")
canvas.line(-1, 0, 1, 0)
canvas.line(0, -1, 0, 1)
DELIMITER_HALF = 0.05
for d in [-1 + i * 1/3 for i in range(0,7)]:
canvas.line(d, -DELIMITER_HALF, d, DELIMITER_HALF)
canvas.line(-DELIMITER_HALF, d, DELIMITER_HALF, d)
points = []
for az, el in zip(azimuth_series, elevation_series):
d = 1 - el / 90
az_rad = az * (math.pi / 180)
x = d * math.sin(az_rad)
y = d * math.cos(az_rad)
points.append((x, y))
if len(points) == 0:
return
first_point_iterator = iter(points)
second_point_iterator = iter(points)
first_point = next(second_point_iterator)
edges = zip(first_point_iterator, second_point_iterator)
for (x1, y1), (x2, y2) in edges:
canvas.line(x1, y1, x2, y2, color=COLOR_BLUE)
canvas.point(first_point[0], first_point[1], color=COLOR_RED)
print(canvas.plot())
print("Red dot is AOS point\n")