class MainWidget(qg.QDialog):
def __init__(self, design, sketches, layers, operations, jointop=None,buffer = .01):
super(MainWidget, self).__init__()
self.design = design
self.sketches = sketches
self.layers = layers
self.operations = operations
self.operation_list = DraggableTreeWidget()
self.operation_list.linklist(self.operations)
self.table = Table(JointRow(self.get_sketches, self.get_layers),Delegate)
table_control= TableControl(self.table, self)
button_ok = qg.QPushButton('Ok')
button_cancel = qg.QPushButton('Cancel')
button_ok.clicked.connect(self.accept)
button_cancel.clicked.connect(self.reject)
self.buffer_val = qg.QLineEdit()
sublayout2 = qg.QHBoxLayout()
sublayout2.addStretch()
sublayout2.addWidget(button_ok)
sublayout2.addWidget(button_cancel)
sublayout2.addStretch()
layout = qg.QVBoxLayout()
layout.addWidget(qg.QLabel('Device'))
layout.addWidget(self.operation_list)
layout.addWidget(table_control)
layout.addWidget(qg.QLabel('Buffer'))
layout.addWidget(self.buffer_val)
layout.addLayout(sublayout2)
self.setLayout(layout)
if jointop is not None:
try:
op_ref, output_ii = jointop.operation_links['parent'][0]
op_ii = design.operation_index(op_ref)
self.operation_list.selectIndeces([(op_ii, output_ii)])
except(IndexError, KeyError):
pass
try:
fixed_ref, fixed_output_ii = jointop.operation_links[
'fixed'][0]
fixed_ii = design.operation_index(fixed_ref)
self.fixed.selectIndeces([(fixed_ii, fixed_output_ii)])
except(IndexError, KeyError):
pass
for item in jointop.joint_defs:
sketch = self.design.sketches[item.sketch]
joint_layer = self.design.return_layer_definition().getlayer(
item.joint_layer)
sublaminate_layers = [self.design.return_layer_definition().getlayer(
item2) for item2 in item.sublaminate_layers]
self.table.row_add(
sketch,
joint_layer,
sublaminate_layers,
item.width)
else:
self.table.row_add_empty()
self.buffer_val.setText(str(buffer))
self.table.resizeColumnsToContents()
self.table.reset_min_width()
self.table.setHorizontalScrollBarPolicy(qc.Qt.ScrollBarPolicy.ScrollBarAlwaysOff)
def contact_sketch(self):
try:
return self.sketchwidget.itemlist.selectedItems()[0].value
except IndexError:
return None
def get_sketches(self):
return self.sketches
def get_layers(self):
return self.layers
def acceptdata(self):
jointdefs = []
for ii in range(self.table.rowCount()):
sketch = self.table.item(ii, 0).data(qc.Qt.ItemDataRole.UserRole)
joint_layer = self.table.item(
ii, 1).data(
qc.Qt.ItemDataRole.UserRole)
sublaminate_layers = self.table.item(
ii, 2).data(
qc.Qt.ItemDataRole.UserRole)
width = (self.table.item(ii, 3).data(qc.Qt.ItemDataRole.UserRole))
jointdefs.append(JointDef(sketch.id,joint_layer.id,[item.id for item in sublaminate_layers],width))
operation_links = {}
operation_links['parent'] = self.operation_list.currentRefs()
sketch_links = {}
return operation_links,sketch_links,jointdefs,float(self.buffer_val.text())
class MainWidget(qg.QDialog):
def __init__(self, design, sketches, layers, operations, jointop=None,sketch = None):
super(MainWidget, self).__init__()
self.design = design
self.sketches = sketches
self.layers = layers
self.operations = operations
self.operation_list = DraggableTreeWidget()
self.operation_list.linklist(self.operations)
self.fixed = DraggableTreeWidget()
self.fixed.linklist(self.operations)
self.table = Table(JointRow(self.get_sketches, self.get_layers),Delegate)
table_control= TableControl(self.table, self)
self.sketchwidget = SketchListManager(self.design,name='Contact Points Sketch')
for ii in range(self.sketchwidget.itemlist.count()):
item = self.sketchwidget.itemlist.item(ii)
if item.value == sketch:
item.setSelected(True)
button_ok = qg.QPushButton('Ok')
button_cancel = qg.QPushButton('Cancel')
button_ok.clicked.connect(self.accept)
button_cancel.clicked.connect(self.reject)
sublayout1 = qg.QHBoxLayout()
sublayout1_1 = qg.QVBoxLayout()
sublayout1_2 = qg.QVBoxLayout()
sublayout1_3 = qg.QVBoxLayout()
sublayout1_1.addWidget(qg.QLabel('Device'))
sublayout1_1.addWidget(self.operation_list)
sublayout1_2.addWidget(qg.QLabel('Fixed Region'))
sublayout1_2.addWidget(self.fixed)
sublayout1_3.addWidget(self.sketchwidget)
sublayout1.addLayout(sublayout1_1)
sublayout1.addLayout(sublayout1_2)
sublayout1.addLayout(sublayout1_3)
sublayout2 = qg.QHBoxLayout()
sublayout2.addStretch()
sublayout2.addWidget(button_ok)
sublayout2.addWidget(button_cancel)
sublayout2.addStretch()
layout = qg.QVBoxLayout()
layout.addLayout(sublayout1)
layout.addWidget(table_control)
layout.addLayout(sublayout2)
self.setLayout(layout)
if jointop is not None:
try:
op_ref, output_ii = jointop.operation_links['parent'][0]
op_ii = design.operation_index(op_ref)
self.operation_list.selectIndeces([(op_ii, output_ii)])
except(IndexError, KeyError):
pass
try:
fixed_ref, fixed_output_ii = jointop.operation_links[
'fixed'][0]
fixed_ii = design.operation_index(fixed_ref)
self.fixed.selectIndeces([(fixed_ii, fixed_output_ii)])
except(IndexError, KeyError):
pass
for item in jointop.joint_defs:
sketch = self.design.sketches[item.sketch]
joint_layer = self.design.return_layer_definition().getlayer(
item.joint_layer)
sublaminate_layers = [self.design.return_layer_definition().getlayer(
item2) for item2 in item.sublaminate_layers]
self.table.row_add(
sketch,
joint_layer,
sublaminate_layers,
item.width,
item.stiffness,
item.damping,
item.preload_angle,
item.limit_negative,
item.limit_positive)
else:
self.table.row_add_empty()
self.table.resizeColumnsToContents()
self.table.reset_min_width()
self.table.setHorizontalScrollBarPolicy(qc.Qt.ScrollBarAlwaysOff)
def contact_sketch(self):
try:
return self.sketchwidget.itemlist.selectedItems()[0].value
except IndexError:
return None
def get_sketches(self):
return self.sketches
def get_layers(self):
return self.layers
def acceptdata(self):
jointdefs = []
for ii in range(self.table.rowCount()):
sketch = self.table.item(ii, 0).data(qc.Qt.UserRole)
joint_layer = self.table.item(
ii, 1).data(
qc.Qt.UserRole)
sublaminate_layers = self.table.item(
ii, 2).data(
qc.Qt.UserRole)
width = (self.table.item(ii, 3).data(qc.Qt.UserRole))
stiffness = (
self.table.item(
ii, 4).data(
qc.Qt.UserRole))
damping = (
self.table.item(
ii,
5).data(
qc.Qt.UserRole))
preload_angle = (self.table.item(ii, 6).data(qc.Qt.UserRole))
limit_negative = (self.table.item(ii, 7).data(qc.Qt.UserRole))
limit_positive = (self.table.item(ii, 8).data(qc.Qt.UserRole))
jointdefs.append(JointDef(sketch.id,
joint_layer.id,
[item.id for item in sublaminate_layers],
width,
stiffness,
damping,
preload_angle,limit_negative,limit_positive))
operation_links = {}
operation_links['parent'] = self.operation_list.currentRefs()
operation_links['fixed'] = self.fixed.currentRefs()
sketch_links = {}
sketch_links['contact_points'] = [self.contact_sketch().id]
return operation_links,sketch_links,jointdefs
class MainWidget(qg.QDialog):
def __init__(self, design, sketches, layers, operations, jointop=None,sketch = None):
super(MainWidget, self).__init__()
self.design = design
self.sketches = sketches
self.layers = layers
self.operations = operations
self.operation_list = DraggableTreeWidget()
self.operation_list.linklist(self.operations)
self.fixed = DraggableTreeWidget()
self.fixed.linklist(self.operations)
self.table = Table(JointRow(self.get_sketches, self.get_layers),Delegate)
table_control= TableControl(self.table, self)
self.sketchwidget = SketchListManager(self.design,name='Contact Points Sketch')
for ii in range(self.sketchwidget.itemlist.count()):
item = self.sketchwidget.itemlist.item(ii)
if item.value == sketch:
item.setSelected(True)
button_ok = qg.QPushButton('Ok')
button_cancel = qg.QPushButton('Cancel')
button_ok.clicked.connect(self.accept)
button_cancel.clicked.connect(self.reject)
sublayout1 = qg.QHBoxLayout()
sublayout1_1 = qg.QVBoxLayout()
sublayout1_2 = qg.QVBoxLayout()
sublayout1_3 = qg.QVBoxLayout()
sublayout1_1.addWidget(qg.QLabel('Device'))
sublayout1_1.addWidget(self.operation_list)
sublayout1_2.addWidget(qg.QLabel('Fixed Region'))
sublayout1_2.addWidget(self.fixed)
sublayout1_3.addWidget(self.sketchwidget)
sublayout1.addLayout(sublayout1_1)
sublayout1.addLayout(sublayout1_2)
sublayout1.addLayout(sublayout1_3)
sublayout2 = qg.QHBoxLayout()
sublayout2.addStretch()
sublayout2.addWidget(button_ok)
sublayout2.addWidget(button_cancel)
sublayout2.addStretch()
layout = qg.QVBoxLayout()
layout.addLayout(sublayout1)
layout.addWidget(table_control)
layout.addLayout(sublayout2)
self.setLayout(layout)
if jointop is not None:
try:
op_ref, output_ii = jointop.operation_links['parent'][0]
op_ii = design.operation_index(op_ref)
self.operation_list.selectIndeces([(op_ii, output_ii)])
except(IndexError, KeyError):
pass
try:
fixed_ref, fixed_output_ii = jointop.operation_links[
'fixed'][0]
fixed_ii = design.operation_index(fixed_ref)
self.fixed.selectIndeces([(fixed_ii, fixed_output_ii)])
except(IndexError, KeyError):
pass
for item in jointop.joint_defs:
sketch = self.design.sketches[item.sketch]
joint_layer = self.design.return_layer_definition().getlayer(
item.joint_layer)
sublaminate_layers = [self.design.return_layer_definition().getlayer(
item2) for item2 in item.sublaminate_layers]
self.table.row_add(
sketch,
joint_layer,
sublaminate_layers,
item.width,
item.stiffness,
item.damping,
item.preload_angle,
item.limit_negative,
item.limit_positive)
else:
self.table.row_add_empty()
self.table.resizeColumnsToContents()
self.table.reset_min_width()
self.table.setHorizontalScrollBarPolicy(qc.Qt.ScrollBarPolicy.ScrollBarAlwaysOff)
def contact_sketch(self):
try:
return self.sketchwidget.itemlist.selectedItems()[0].value
except IndexError:
return None
def get_sketches(self):
return self.sketches
def get_layers(self):
return self.layers
def acceptdata(self):
jointdefs = []
for ii in range(self.table.rowCount()):
sketch = self.table.item(ii, 0).data(qc.Qt.ItemDataRole.UserRole)
joint_layer = self.table.item(
ii, 1).data(
qc.Qt.ItemDataRole.UserRole)
sublaminate_layers = self.table.item(
ii, 2).data(
qc.Qt.ItemDataRole.UserRole)
width = (self.table.item(ii, 3).data(qc.Qt.ItemDataRole.UserRole))
stiffness = (
self.table.item(
ii, 4).data(
qc.Qt.ItemDataRole.UserRole))
damping = (
self.table.item(
ii,
5).data(
qc.Qt.ItemDataRole.UserRole))
preload_angle = (self.table.item(ii, 6).data(qc.Qt.ItemDataRole.UserRole))
limit_negative = (self.table.item(ii, 7).data(qc.Qt.ItemDataRole.UserRole))
limit_positive = (self.table.item(ii, 8).data(qc.Qt.ItemDataRole.UserRole))
jointdefs.append(JointDef(sketch.id,
joint_layer.id,
[item.id for item in sublaminate_layers],
width,
stiffness,
damping,
preload_angle,limit_negative,limit_positive))
operation_links = {}
operation_links['parent'] = self.operation_list.currentRefs()
operation_links['fixed'] = self.fixed.currentRefs()
sketch_links = {}
sketch_links['contact_points'] = [self.contact_sketch().id]
return operation_links,sketch_links,jointdefs
class MainWidget(qg.QDialog):
def __init__(self,
design,
sketches,
layers,
operations,
jointop=None,
buffer=.01):
super(MainWidget, self).__init__()
self.design = design
self.sketches = sketches
self.layers = layers
self.operations = operations
self.operation_list = DraggableTreeWidget()
self.operation_list.linklist(self.operations)
self.table = Table(JointRow(self.get_sketches, self.get_layers),
Delegate)
table_control = TableControl(self.table, self)
button_ok = qg.QPushButton('Ok')
button_cancel = qg.QPushButton('Cancel')
button_ok.clicked.connect(self.accept)
button_cancel.clicked.connect(self.reject)
self.buffer_val = qg.QLineEdit()
sublayout2 = qg.QHBoxLayout()
sublayout2.addStretch()
sublayout2.addWidget(button_ok)
sublayout2.addWidget(button_cancel)
sublayout2.addStretch()
layout = qg.QVBoxLayout()
layout.addWidget(qg.QLabel('Device'))
layout.addWidget(self.operation_list)
layout.addWidget(table_control)
layout.addWidget(qg.QLabel('Buffer'))
layout.addWidget(self.buffer_val)
layout.addLayout(sublayout2)
self.setLayout(layout)
if jointop is not None:
try:
op_ref, output_ii = jointop.operation_links['parent'][0]
op_ii = design.operation_index(op_ref)
self.operation_list.selectIndeces([(op_ii, output_ii)])
except (IndexError, KeyError):
pass
try:
fixed_ref, fixed_output_ii = jointop.operation_links['fixed'][
0]
fixed_ii = design.operation_index(fixed_ref)
self.fixed.selectIndeces([(fixed_ii, fixed_output_ii)])
except (IndexError, KeyError):
pass
for item in jointop.joint_defs:
sketch = self.design.sketches[item.sketch]
joint_layer = self.design.return_layer_definition().getlayer(
item.joint_layer)
sublaminate_layers = [
self.design.return_layer_definition().getlayer(item2)
for item2 in item.sublaminate_layers
]
self.table.row_add(sketch, joint_layer, sublaminate_layers,
item.width)
else:
self.table.row_add_empty()
self.buffer_val.setText(str(buffer))
self.table.resizeColumnsToContents()
self.table.reset_min_width()
self.table.setHorizontalScrollBarPolicy(qc.Qt.ScrollBarAlwaysOff)
def contact_sketch(self):
try:
return self.sketchwidget.itemlist.selectedItems()[0].value
except IndexError:
return None
def get_sketches(self):
return self.sketches
def get_layers(self):
return self.layers
def acceptdata(self):
jointdefs = []
for ii in range(self.table.rowCount()):
sketch = self.table.item(ii, 0).data(qc.Qt.UserRole)
joint_layer = self.table.item(ii, 1).data(qc.Qt.UserRole)
sublaminate_layers = self.table.item(ii, 2).data(qc.Qt.UserRole)
width = (self.table.item(ii, 3).data(qc.Qt.UserRole))
jointdefs.append(
JointDef(sketch.id, joint_layer.id,
[item.id for item in sublaminate_layers], width))
operation_links = {}
operation_links['parent'] = self.operation_list.currentRefs()
sketch_links = {}
return operation_links, sketch_links, jointdefs, float(
self.buffer_val.text())
