def testRead(self):
if posix_.environ.get('EINTR_TEST'):
# Now we can do kill -TERM PID can get EINTR.
# Or Ctrl-C for KeyboardInterrupt
signal.signal(signal.SIGTERM, _Handler)
log('Hanging on read in pid %d', posix_.getpid())
posix_.read(0, 1)
def ReadBytesFromTerminal(fd, n):
# type: (int, int) -> str
# silly way to make a copy
# https://docs.python.org/2/library/termios.html
orig_attrs = termios.tcgetattr(fd)
term_attrs = termios.tcgetattr(fd)
# cast for MyPy. Each element in termios doesn't have a static type!
#reveal_type(term_attrs[3])
a3 = cast(int, term_attrs[3])
# Disable canonical (buffered) mode. See `man termios` for an extended
# discussion.
term_attrs[3] = a3 & ~termios.ICANON
chunks = []
try:
termios.tcsetattr(fd, termios.TCSANOW, term_attrs)
# posix.read always returns a single character in unbuffered mode
while n > 0:
chunks.append(posix.read(fd, 1))
n -= 1
finally:
termios.tcsetattr(fd, termios.TCSANOW, orig_attrs)
return ''.join(chunks)
def Run(self, cmd_val):
# type: (cmd_value__Argv) -> int
while True:
chunk = posix.read(0, 4096)
if len(chunk) == 0:
break
sys.stdout.write(chunk)
return 0
def RunCommandSub(self, node):
# type: (command_t) -> str
# Hack for weird $(<file) construct
if node.tag_() == command_e.Simple:
simple = cast(command__Simple, node)
# Detect '< file'
if (len(simple.words) == 0 and len(simple.redirects) == 1
and simple.redirects[0].op.id == Id.Redir_Less):
# change it to __cat < file
# note: cmd_eval.py _Dispatch works around lack of spid
tok = Token(Id.Lit_Chars, runtime.NO_SPID, '__cat')
cat_word = compound_word([tok])
# MUTATE the command.Simple node. This will only be done the first
# time in the parent process.
simple.words.append(cat_word)
p = self._MakeProcess(node,
inherit_errexit=self.exec_opts.inherit_errexit())
r, w = posix.pipe()
p.AddStateChange(process.StdoutToPipe(r, w))
_ = p.Start()
#log('Command sub started %d', pid)
chunks = [] # type: List[str]
posix.close(w) # not going to write
while True:
byte_str = posix.read(r, 4096)
if len(byte_str) == 0:
break
chunks.append(byte_str)
posix.close(r)
status = p.Wait(self.waiter)
# OSH has the concept of aborting in the middle of a WORD. We're not
# waiting until the command is over!
if self.exec_opts.more_errexit():
if self.exec_opts.errexit() and status != 0:
raise error.ErrExit('Command sub exited with status %d (%r)',
status, NewStr(command_str(node.tag_())))
else:
# Set a flag so we check errexit at the same time as bash. Example:
#
# a=$(false)
# echo foo # no matter what comes here, the flag is reset
#
# Set ONLY until this command node has finished executing.
# HACK: move this
self.cmd_ev.check_command_sub_status = True
self.mem.SetLastStatus(status)
# Runtime errors test case: # $("echo foo > $@")
# Why rstrip()?
# https://unix.stackexchange.com/questions/17747/why-does-shell-command-substitution-gobble-up-a-trailing-newline-char
return ''.join(chunks).rstrip('\n')
def ReadLineFromStdin():
chars = []
while True:
c = posix.read(0, 1)
if not c:
break
chars.append(c)
if c == '\n':
break
return ''.join(chars)
def _ReadN(self, stdin_fd, n):
# type: (int, int) -> str
chunks = [] # type: List[str]
bytes_left = n
while bytes_left > 0:
chunk = posix.read(stdin_fd, n) # read at up to N chars
if len(chunk) == 0:
break
chunks.append(chunk)
bytes_left -= len(chunk)
s = ''.join(chunks)
return s
def _ReadAll():
# type: () -> str
"""Read all of stdin."""
chunks = [] # type: List[str]
while True:
c = posix.read(0, 4096)
if len(c) == 0:
break
chunks.append(c)
return ''.join(chunks)
def _ReadLine():
# type: () -> str
"""Read a line from stdin."""
# TODO: This should be an array of integers in C++
chars = [] # type: List[str]
while True:
c = posix.read(0, 1)
if len(c) == 0:
break
chars.append(c)
if c == '\n':
break
return ''.join(chars)
def _ReadLine():
# type: () -> str
"""Read a line from stdin.
TODO: use a more efficient function in C
"""
chars = []
while True:
c = posix.read(0, 1)
if not c:
break
chars.append(c)
if c == '\n':
break
return ''.join(chars)
def RunCommandSub(self, node):
p = self._MakeProcess(node,
disable_errexit=not self.exec_opts.strict_errexit)
r, w = posix.pipe()
p.AddStateChange(process.StdoutToPipe(r, w))
pid = p.Start()
#log('Command sub started %d', pid)
chunks = []
posix.close(w) # not going to write
while True:
byte_str = posix.read(r, 4096)
if not byte_str:
break
chunks.append(byte_str)
posix.close(r)
status = p.Wait(self.waiter)
# OSH has the concept of aborting in the middle of a WORD. We're not
# waiting until the command is over!
if self.exec_opts.strict_errexit:
if self.exec_opts.ErrExit() and status != 0:
raise util.ErrExitFailure(
'Command sub exited with status %d (%r)', status,
node.__class__.__name__)
else:
# Set a flag so we check errexit at the same time as bash. Example:
#
# a=$(false)
# echo foo # no matter what comes here, the flag is reset
#
# Set ONLY until this command node has finished executing.
self.check_command_sub_status = True
self.mem.SetLastStatus(status)
# Runtime errors test case: # $("echo foo > $@")
# Why rstrip()?
# https://unix.stackexchange.com/questions/17747/why-does-shell-command-substitution-gobble-up-a-trailing-newline-char
return ''.join(chunks).rstrip('\n')
def ReadLineFromStdin(delim_char):
# type: (Optional[str]) -> Tuple[str, bool]
"""Read a portion of stdin.
If delim_char is set, read until that delimiter, but don't include it.
If not set, read a line, and include the newline.
"""
eof = False
chars = []
while True:
c = posix.read(0, 1)
if not c:
eof = True
break
if c == delim_char:
break
chars.append(c)
return ''.join(chars), eof
def Run(self, cmd_val):
# type: (cmd_value__Argv) -> int
arg, i = READ_SPEC.ParseCmdVal(cmd_val)
names = cmd_val.argv[i:]
if arg.n is not None: # read a certain number of bytes
stdin = sys.stdin.fileno()
try:
name = names[0]
except IndexError:
name = 'REPLY' # default variable name
s = ""
if sys.stdin.isatty(): # set stdin to read in unbuffered mode
orig_attrs = termios.tcgetattr(stdin)
attrs = termios.tcgetattr(stdin)
# disable canonical (buffered) mode
# see `man termios` for an extended discussion
attrs[3] &= ~termios.ICANON
try:
termios.tcsetattr(stdin, termios.TCSANOW, attrs)
# posix.read always returns a single character in unbuffered mode
while arg.n > 0:
s += posix.read(stdin, 1)
arg.n -= 1
finally:
termios.tcsetattr(stdin, termios.TCSANOW, orig_attrs)
else:
s_len = 0
while arg.n > 0:
buf = posix.read(stdin, arg.n)
# EOF
if buf == '':
break
arg.n -= len(buf)
s += buf
state.SetLocalString(self.mem, name, s)
# NOTE: Even if we don't get n bytes back, there is no error?
return 0
if not names:
names.append('REPLY')
# leftover words assigned to the last name
if arg.a:
max_results = 0 # no max
else:
max_results = len(names)
# We have to read more than one line if there is a line continuation (and
# it's not -r).
parts = []
join_next = False
while True:
line = ReadLineFromStdin()
#log('LINE %r', line)
if not line: # EOF
status = 1
break
if line.endswith('\n'): # strip trailing newline
line = line[:-1]
status = 0
else:
# odd bash behavior: fail even if we can set variables.
status = 1
spans = self.splitter.SplitForRead(line, not arg.r)
done, join_next = _AppendParts(line, spans, max_results, join_next,
parts)
#log('PARTS %s continued %s', parts, continued)
if done:
break
if arg.a:
state.SetArrayDynamic(self.mem, arg.a, parts)
else:
for i in xrange(max_results):
try:
s = parts[i]
except IndexError:
s = '' # if there are too many variables
#log('read: %s = %s', names[i], s)
state.SetStringDynamic(self.mem, names[i], s)
return status
def testEmptyReadAndWrite(self):
# Regression for bug where this would hang
posix_.read(0, 0)
posix_.write(1, '')
def Run(self, cmd_val):
# type: (cmd_value__Argv) -> int
attrs, arg_r = flag_spec.ParseCmdVal('read', cmd_val)
arg = arg_types.read(attrs.attrs)
names = arg_r.Rest()
if arg.n >= 0: # read a certain number of bytes (-1 means unset)
if len(names):
name = names[0]
else:
name = 'REPLY' # default variable name
status = 0
stdin_fd = self.stdin.fileno()
if self.stdin.isatty(): # set stdin to read in unbuffered mode
s = passwd.ReadBytesFromTerminal(stdin_fd, arg.n)
else:
chunks = [] # type: List[str]
n = arg.n
while n > 0:
chunk = posix.read(stdin_fd, n) # read at up to N chars
if len(chunk) == 0:
break
chunks.append(chunk)
n -= len(chunk)
s = ''.join(chunks)
# DIdn't read all the bytes we wanted
if len(s) != n:
status = 1
state.SetStringDynamic(self.mem, name, s)
# NOTE: Even if we don't get n bytes back, there is no error?
return status
if len(names) == 0:
names.append('REPLY')
# leftover words assigned to the last name
if arg.a is not None:
max_results = 0 # no max
else:
max_results = len(names)
if arg.d is not None:
if len(arg.d):
delim_char = arg.d[0]
else:
delim_char = '\0' # -d '' delimits by NUL
else:
delim_char = '\n' # read a line
# We have to read more than one line if there is a line continuation (and
# it's not -r).
parts = [] # type: List[mylib.BufWriter]
join_next = False
status = 0
while True:
line, eof = ReadLineFromStdin(delim_char)
if eof:
# status 1 to terminate loop. (This is true even though we set
# variables).
status = 1
#log('LINE %r', line)
if len(line) == 0:
break
spans = self.splitter.SplitForRead(line, not arg.r)
done, join_next = _AppendParts(line, spans, max_results, join_next,
parts)
#log('PARTS %s continued %s', parts, continued)
if done:
break
entries = [buf.getvalue() for buf in parts]
num_parts = len(entries)
if arg.a is not None:
state.SetArrayDynamic(self.mem, arg.a, entries)
else:
for i in xrange(max_results):
if i < num_parts:
s = entries[i]
else:
s = '' # if there are too many variables
#log('read: %s = %s', names[i], s)
state.SetStringDynamic(self.mem, names[i], s)
return status
def RunCommandSub(self, cs_part):
# type: (command_sub) -> str
if not self.exec_opts.allow_command_sub():
# TODO:
# - Add spid of $(
# - Better hints. Use 'run' for 'if myfunc', and 2 lines like local x;
# x=$(false) fo assignment builtins.
# - Maybe we should have an error message ID that links somewhere?
e_die(
"Command subs not allowed here because status wouldn't be checked (strict_errexit)."
)
node = cs_part.child
# Hack for weird $(<file) construct
if node.tag_() == command_e.Simple:
simple = cast(command__Simple, node)
# Detect '< file'
if (len(simple.words) == 0 and len(simple.redirects) == 1
and simple.redirects[0].op.id == Id.Redir_Less):
# change it to __cat < file
# note: cmd_eval.py _Dispatch works around lack of spid
tok = Token(Id.Lit_Chars, runtime.NO_SPID, '__cat')
cat_word = compound_word([tok])
# MUTATE the command.Simple node. This will only be done the first
# time in the parent process.
simple.words.append(cat_word)
p = self._MakeProcess(node,
inherit_errexit=self.exec_opts.inherit_errexit())
r, w = posix.pipe()
p.AddStateChange(process.StdoutToPipe(r, w))
_ = p.Start()
#log('Command sub started %d', pid)
chunks = [] # type: List[str]
posix.close(w) # not going to write
while True:
byte_str = posix.read(r, 4096)
if len(byte_str) == 0:
break
chunks.append(byte_str)
posix.close(r)
status = p.Wait(self.waiter)
# OSH has the concept of aborting in the middle of a WORD. We're not
# waiting until the command is over!
if self.exec_opts.command_sub_errexit():
if status != 0:
raise error.ErrExit('Command sub exited with status %d (%s)' %
(status, ui.CommandType(node)),
span_id=cs_part.left_token.span_id,
status=status)
else:
# Set a flag so we check errexit at the same time as bash. Example:
#
# a=$(false)
# echo foo # no matter what comes here, the flag is reset
#
# Set ONLY until this command node has finished executing.
# HACK: move this
self.cmd_ev.check_command_sub_status = True
self.mem.SetLastStatus(status)
# Runtime errors test case: # $("echo foo > $@")
# Why rstrip()?
# https://unix.stackexchange.com/questions/17747/why-does-shell-command-substitution-gobble-up-a-trailing-newline-char
return ''.join(chunks).rstrip('\n')
