def grating_tooth_points(
ap: float64,
bp: float64,
xp: float64,
width: Union[float64, float],
taper_angle: float,
spiked: bool = True,
angle_step: float = 1.0,
) -> ndarray:
theta_min = -taper_angle / 2
theta_max = taper_angle / 2
backbone_points = ellipse_arc(ap, bp, xp, theta_min, theta_max, angle_step)
if spiked:
spike_length = width / 3
else:
spike_length = 0.0
points = extrude_path(
backbone_points,
width,
with_manhattan_facing_angles=False,
spike_length=spike_length,
)
return points
def _bend_euler(
theta: int = 90,
radius: Union[int, float] = 10.0,
width: float = 0.5,
resolution: float = 150.0,
layer: Tuple[int, int] = LAYER.WG,
) -> Component:
c = pp.Component()
backbone = euler_bend_points(theta, radius=radius, resolution=resolution)
pts = extrude_path(backbone, width)
c.add_polygon(pts, layer=layer)
# print(backbone[0])
# print(backbone[-1])
c.info["length"] = euler_length(radius, theta)
c.radius = radius
c.add_port(
name="in0",
midpoint=np.round(backbone[0].xy, 3),
orientation=180,
layer=layer,
width=width,
)
c.add_port(
name="out0",
midpoint=np.round(backbone[-1].xy, 3),
orientation=theta,
layer=layer,
width=width,
)
return c
def bezier(
name: None = None,
width: float = 0.5,
control_points: List[Tuple[float, float]] = [
(0.0, 0.0),
(5.0, 0.0),
(5.0, 2.0),
(10.0, 2.0),
],
t: ndarray = np.linspace(0, 1, 201),
layer: Tuple[int, int] = LAYER.WG,
**extrude_path_params
) -> Component:
""" bezier bend """
def _fmt_f(x):
return "{:.3f}".format(x).rstrip("0").rstrip(".")
def _fmt_cp(cps):
return "_".join(["({},{})".format(_fmt_f(p[0]), _fmt_f(p[1])) for p in cps])
if name is None:
points_hash = hashlib.md5(_fmt_cp(control_points).encode()).hexdigest()
name = "bezier_w{}_{}_{}".format(int(width * 1e3), points_hash, layer)
c = pp.Component(name=name)
path_points = bezier_curve(t, control_points)
polygon_points = extrude_path(path_points, width, **extrude_path_params)
angles = angles_deg(path_points)
c.info["start_angle"] = angles[0]
c.info["end_angle"] = angles[-2]
a0 = angles[0] + 180
a1 = angles[-2]
a0 = snap_angle(a0)
a1 = snap_angle(a1)
p0 = path_points[0]
p1 = path_points[-1]
c.add_polygon(polygon_points, layer=layer)
c.add_port(name="0", midpoint=p0, width=width, orientation=a0, layer=layer)
c.add_port(name="1", midpoint=p1, width=width, orientation=a1, layer=layer)
c.info["length"] = path_length(path_points)
curv = curvature(path_points, t)
c.info["min_bend_radius"] = 1 / max(np.abs(curv))
c.info["curvature"] = curv
c.info["t"] = t
return c
def grating_tooth_points(ap, bp, xp, width, taper_angle, spiked=True, angle_step=1.0):
theta_min = -taper_angle / 2
theta_max = taper_angle / 2
backbone_points = ellipse_arc(ap, bp, xp, theta_min, theta_max, angle_step)
if spiked:
spike_length = width / 3
else:
spike_length = 0.0
points = extrude_path(
backbone_points,
width,
with_manhattan_facing_angles=False,
spike_length=spike_length,
)
return points
def bezier_points(control_points, width, t=np.linspace(0, 1, 101)):
"""t: 1D array of points varying between 0 and 1"""
points = bezier_curve(t, control_points)
return extrude_path(points, width)
def bezier(
name: None = None,
width: float = 0.5,
control_points: List[Tuple[float, float]] = [
(0.0, 0.0),
(5.0, 0.0),
(5.0, 2.0),
(10.0, 2.0),
],
t: ndarray = np.linspace(0, 1, 201),
layer: Tuple[int, int] = LAYER.WG,
with_manhattan_facing_angles: bool = True,
spike_length: float = 0.0,
start_angle: Optional[int] = None,
end_angle: Optional[int] = None,
grid: float = 0.001,
) -> Component:
"""Bezier bend
We avoid autoname control_points and t spacing
Args:
width: waveguide width
control_points: list of points
t: 1D array of points varying between 0 and 1
layer: layer
"""
def format_float(x):
return "{:.3f}".format(x).rstrip("0").rstrip(".")
def _fmt_cp(cps):
return "_".join(
[f"({format_float(p[0])},{format_float(p[1])})" for p in cps])
if name is None:
points_hash = hashlib.md5(_fmt_cp(control_points).encode()).hexdigest()
name = f"bezier_w{int(width*1e3)}_{points_hash}_{layer[0]}_{layer[1]}"
c = pp.Component(name=name)
c.ignore.add("control_points")
c.ignore.add("t")
path_points = bezier_curve(t, control_points)
polygon_points = extrude_path(
path_points,
width=width,
with_manhattan_facing_angles=with_manhattan_facing_angles,
spike_length=spike_length,
start_angle=start_angle,
end_angle=end_angle,
grid=grid,
)
angles = angles_deg(path_points)
c.info["start_angle"] = pp.drc.snap_to_1nm_grid(angles[0])
c.info["end_angle"] = pp.drc.snap_to_1nm_grid(angles[-2])
a0 = angles[0] + 180
a1 = angles[-2]
a0 = snap_angle(a0)
a1 = snap_angle(a1)
p0 = path_points[0]
p1 = path_points[-1]
c.add_polygon(polygon_points, layer=layer)
c.add_port(name="0", midpoint=p0, width=width, orientation=a0, layer=layer)
c.add_port(name="1", midpoint=p1, width=width, orientation=a1, layer=layer)
curv = curvature(path_points, t)
c.info["length"] = pp.drc.snap_to_1nm_grid(path_length(path_points))
c.info["min_bend_radius"] = pp.drc.snap_to_1nm_grid(1 / max(np.abs(curv)))
# c.info["curvature"] = curv
# c.info["t"] = t
return c
