def basic_varchar(table, attr):
if not attr.parameters:
msg = "Internal error: Parameter of attribute " + \
attr.name + "'s data type disappeared. Sorry for that.\n"
errprint(msg, ERRCODE["INTERNAL"])
max_range = attr.parameters[0] # the only param states the max range
min_range = 2
#to prevent provoking users
if max_range == 1:
min_range = 1
#adjusting the max range
if max_range > 10:
max_range = 10
#regex = r'[BCDFGHJKLMNPQRSTVWXZ][aeiouy]([bcdfghjklmnpqrstvwxz][aeiouy])+'
regex = r'[BCDFGHJKLMNPQRSTVWXZ][aeiouy]([bcdfghjklmnpqrstvwxz][aeiouy][bcdfghjklmnpqrstvwxz]?)+'
#else:
# regex = r'[BCDFGHJKLMNPQRSTVWXZ][aeiouy]([bcdfghjklmnpqrstvwxz][aeiouy]){1,2} (([bcdfghjklmnpqrstvwxz][aeiouy]){1,3})+'
string = exrex.getone(regex)
x = random.randint(2, max_range) # randomly generates varchar length for this iteration from range
value = string[:x] # cuts the obtained string
#checks for white space at the end of string and deletes it if yes
if string.endswith(' '):
string = string[:-1]
return "\'" + value + "\'" # for string values
def dsl_generator(table_list, DEST, fill_cnt):
#iniciates
initiate_gen(table_list)
if(DEST == "file"):
home = os.path.expanduser('~') # get the home directory for this user
pth = home + \
"/dsl.txt" # creates the path representing ~/dsl.txt
try:
fd = open(pth, 'w')
except IOError:
msg = "Runtime error: Did not manage to create a destination file '~/dsl.txt'."
errprint(msg, ERRCODE["RUNTIME"])
else:
fd = sys.stdout
for table in table_list:
fd.write("TABLE:" + table.name + "(" + str(fill_cnt) + ")\n")
for attr in table.attr_list:
fd.write("\t::" + attr.name + "\n")
fd.write(get_dtype_line(attr) + "\n")
fd.write(get_fill_line(attr) + "\n")
fd.write(get_constr_line(attr) + "\n")
fd.write("\n")
def table_filler(table):
if not table_check(table): # checks if we know enough to fill this table
return True # means there is an unifnished table
for i in range(0, table.fill_count):
flag = True
timeout = 0
while flag and timeout < 100:
flag = False
result = get_values(table)
values = result['values']
unique_values = result['unique_values']
if len(unique_values) > 0 and not check_unique_group(table, unique_values):
flag = True # this set of values has already been used, we need to do it all again
remove_last_saved(table) # will remove all values possibly saved during this generating
timeout += 1
elif len(unique_values) > 0: # group is unique as checked in above branch
table.unique_values.append(unique_values) # we append so this combo cannot be used again
if timeout >= 100:
msg = "Runtime error: The timeout for finding new unique value combination for table '" + table.name + "' exceeded.\n" \
"Tip: Check if the given fill method offers enough unique combinations.\n"
errprint(msg, ERRCODE["RUNTIME"])
string = "INSERT INTO " + table.name + "\n" + "VALUES (" + \
values + ");\n"
print string
textbank_close(table) # closes the file if it's opened
table.solved = True
return False # no problems with this table
def p_multi_1param(p):
'''multi_1param : idOrDtypeName COMMA
| idOrDtypeName'''
debug("multi_1param")
global alter_attr
global alter_table
global TO_SET_CONSTR
global PARAM_COUNTER
alter_attr = None
alter_name = None
#finding the attribute to get altered
for attr in alter_table.attr_list:
if attr.name == p[1]: # p[1] stands for the attribute name in both cases
alter_attr = attr
break
#did we find anything?
if alter_attr is None:
msg = "Input error: Couldn't find the given attribute name '" + p[7] \
+ "' in the list of attributes of table '" + alter_table.name \
+ "' while processing a multiparameter ADD CONSTRAINT.\n"
errprint(msg, ERRCODE["INPUT"])
alter_attr.constraint_flag = True
alter_attr.constraint_cnt += 1 # increments the cnt
TO_SET_CONSTR.append(alter_attr) # we pass the attribute to alter
def check_regex_compatibility(attr):
if not attr.data_type in ("VARCHAR", "CHAR", "INT"):
msg = "Semantic Error: The given fill method '" + new_attribute.fill_method \
+ "' incompatible with the given data type '" + new_attribute.data_type \
+ "' in table '" + new_table.name + \
"', attribute '" + new_attribute.name + "'.\n"
errprint(msg, ERRCODE["SEMANTIC"])
def check_collision():
global new_attribute
if new_attribute.serial:
if new_attribute.null or new_attribute.foreign_key:
msg = "Semantic Error: Attribute '" + new_attribute.name + "' has a constraint uncompatible " \
+ "with its data type '" + new_attribute.data_type + "'. Colliding constraint: " \
+ new_attribute.constraint_type + ".\n"
errprint(msg, ERRCODE["SEMANTIC"])
def p_alterHeader(p):
'alterHeader : ALTER TABLE ONLY IDENTIFIER'
debug("alterHeader")
global alter_table
if not p[4] in name_dict.keys():
msg = "Input error: Table '" + p[4] + \
"'given in ALTER part couldn't be found.\n"
errprint(msg, ERRCODE["INPUT"])
alter_table = name_dict[p[4]]
def create_table_dict(table_list):
global TABLE_DICT
for table in table_list:
if table.name in TABLE_DICT:
msg = "Semantic error: Duplicate in table names found!\n"
errprint(msg, ERRCODE["SEMANTIC"])
TABLE_DICT[table.name] = table
def on_stop_check():
global checker_thread, thread_lock
with thread_lock:
if checker_thread is not None:
printer.errprint('客户停止了自检\n')
stop_thread(checker_thread)
checker_thread = None
socketio.emit('checker_state', 0)
progressbar.update(0, 0)
else:
printer.errprint('后台并没有正在自检\n')
def check_valid(attr):
method = attr.fill_method
global new_table
if method == 'fm_regex':
#check_regex_compatibility(attr) #check if regex method can be used with given data type
#edit: let's leave it free for all - on users responsibility
try:
re.compile(str(attr.fill_parameters[0]))
#check if the given parameter is a valid regex
except re.error:
msg = "Semantic Error: Wrong parameter given to fill method '" + new_attribute.fill_method \
+ "' in table '" + new_table.name + \
"', attribute '" + new_attribute.name + "'.\n"
errprint(msg, ERRCODE["SEMANTIC"])
elif method == 'fm_textbank':
if not attr.data_type in ("VARCHAR", "CHAR", "TEXT"):
msg = "Semantic Error: The given fill method '" + new_attribute.fill_method \
+ "' incompatible with the given data type '" + new_attribute.data_type \
+ "' in table '" + new_table.name + \
"', attribute '" + new_attribute.name + "'.\n"
errprint(msg, ERRCODE["SEMANTIC"])
elif method == 'fm_reference':
string = attr.fill_parameters[0]
pos = string.find(":")
if pos == -1: # didn't find the colon
msg = "Semantic Error: Wrong parameter given to fill method '" + new_attribute.fill_method \
+ "' in table '" + new_table.name + \
"', attribute '" + new_attribute.name + "'.\n"
errprint(msg, ERRCODE["SEMANTIC"])
new_table.fk = True # sets the flag that table contains a foreign key
attr.foreign_key = True # this flag allows us to fill this attr properly (if different than foreign key data type given, we have to set it here)
attr.fk_table = string[0:pos] # gets what is before the colon
attr.fk_attribute = string[(pos+1):]
if new_table.name == attr.fk_table:
msg = "Semantic Error: Foreign key referencing the same table not supported. Table: '" \
+ new_table.name + "', attribute: '" + attr.name + "'.\n"
errprint(msg, ERRCODE["SEMANTIC"])
elif method == 'fm_default':
if not attr.default:
msg = "Semantic Error: Fill method fm_default stated but no DEFAULT value given.'.\n"
errprint(msg, ERRCODE["SEMANTIC"])
def background_thread_check():
global checker_thread, dic_min_error_rev, thread_lock
try:
dic_min_error_rev = main.do_auto_check(dic_min_error_rev)
file = open("./dic_min_error_rev", "w")
file.write(json.dumps(dic_min_error_rev))
file.close()
except Exception as ex:
# Get current system exception
ex_type, ex_value, ex_traceback = sys.exc_info()
# Extract unformatter stack traces as tuples
trace_back = traceback.extract_tb(ex_traceback)
# Format stacktrace
stack_trace = list()
for trace in trace_back:
stack_trace.append(
"File : %s , Line : %d, Func.Name : %s, Message : %s" %
(trace[0], trace[1], trace[2], trace[3]))
printer.errprint("Exception type : %s " % ex_type.__name__)
printer.errprint("Exception message : %s" % ex_value)
printer.errprint("Stack trace : %s" % stack_trace)
printer.errprint("检查意外结束")
progressbar.update(0, 0)
with thread_lock:
print("线程结束")
checker_thread = None
socketio.emit('checker_state', 0)
def get_foreign(attr):
#special case of prefilled tables already in db
#or the foreign key is filled by inserting DEFAULT
if attr.fk_table.fill_count == "FILLED" or attr.fk_attribute.serial:
value = "(select " + attr.fk_attribute.name + " from " + attr.fk_table.name \
+ " offset random() * (select count(*) from " + \
attr.fk_table.name + ") limit 1)"
return value
if not attr.fk_assigned: # we encounter this attr for the first time
if (attr.unique or attr.primary_key) and not attr.unique_group:
attr.fk_values = attr.fk_attribute.values_list[:]
#duplicates the values list
else:
attr.fk_values = attr.fk_attribute.values_list # only assigns the existing list
attr.fk_assigned = True # sets the flag - list of values has been set
#gets list of the desired values to easily work with
val_list = attr.fk_values
length = len(val_list)
#length_self = len(attr.values_list) I have no idea where did this come from xD
if length == 0:
i = 0 # we have one item left (unique-fk combo issue only)
else:
i = random.randint(0, length-1) # randomly chooses one index, minus 1 counts with empty endline
#goes through only if not part of a group
#I suppose the combo of single foreign key and group unique/pk is a bit wild but to make sure
if (attr.unique or attr.primary_key) and not attr.unique_group:
if len(val_list) != 0: # we have something to take from
value = val_list[i]
del val_list[i]
#removes the value so we can't use it again
else:
msg = "Input error: Unique foreign key attribute '" + attr.name + "' cannot be filled " \
+ "as the source attribute '" \
+ attr.fk_attribute.name + "' doesn't offer enough unique values.\n" \
+ "NOTE: Seeder can only work with values it's generating in this run - not with any others.\n"
errprint(msg, ERRCODE["INPUT"])
else:
value = val_list[i] # we don't care if it's repeated
return value
def get_result(self, offset, count, search) -> list:
rev_list = []
db = EasySqlite('rfp.db')
sql = "SELECT * FROM " + self.CONST_TABLE_NAME + " LIMIT ?, ?"
if search != "":
db_res = db.execute(
"select file_path from " + self.CONST_TABLE_NAME +
"_fts where body like '%{0}%'".format(search), [], False,
False)
condition = '\'' + '\',\''.join(fp[0] for fp in db_res) + '\''
sql = "SELECT * FROM " + self.CONST_TABLE_NAME + \
" WHERE file_path in ({0}) LIMIT ?, ?".format(condition)
for row in db.execute(sql, (offset, count), False, False):
project = row[0]
file_name = row[1]
file_path = row[2]
time = row[3]
report_path = row[4]
log = row[5]
html_file_path = ""
if not report_path == "":
if not os.path.exists(report_path):
printer.errprint("cannot find report file: " +
report_path + ", src_file: " + file_path)
continue
report_filename = os.path.splitext(report_path)[0].split(
"\\")[-1]
html_file_path = "{0}\\{1}\\index.html".format(
config.get_dir_pvs_report(), report_filename)
# 如果没有网页报告则创建一个
if not os.path.exists(html_file_path):
self.__convert_to_html(report_path)
rev_list.append({
"project": project,
"file": file_name,
"file_path": file_path,
"time": time,
"html_path": html_file_path,
"report_path": "download\\" + report_path,
"log": [log]
})
return rev_list
def basic_bit(table, attr):
if not attr.parameters:
msg = "Internal error: Parameter of attribute " + \
attr.name + "'s data type disappeared. Sorry for that.\n"
errprint(msg, ERRCODE["INTERNAL"])
length = attr.parameters[0]
regex = '[01]{' + str(length) + '}'
value = exrex.getone(regex)
if attr.data_type == "VARBIT": # we will randomly choose a length between 1 and max
x = random.randint(1, length-1)
value = value[:x]
return value
def initiate_gen(table_list):
for table in table_list:
for attr in table.attr_list:
if attr.constraint_flag and attr.constraint_cnt > 1:
#TODO:check if unique and primary key can be together
check1 = attr.unique and attr.primary_key
check2 = attr.null and attr.primary_key
check3 = attr.null and attr.not_null
check = check1 or check2 or check3
if check:
msg = "Input error: Not compatible constraints used for attribute '" \
+ attr.name + "', table '" + table.name + "'.\n"
errprint(msg, ERRCODE["INPUT"])
def basic_char(table, attr):
if not attr.parameters:
msg = "Internal error: Parameter of attribute " + \
attr.name + "'s data type disappeared. Sorry for that.\n"
errprint(msg, ERRCODE["INTERNAL"])
length = attr.parameters[0]
regex = r'[a-zA-Z0-9_]+'
string = exrex.getone(regex)
#if the generated string was too short
while len(string) < length:
string = string + exrex.getone(regex)
value = string[:length] # cuts the obtained string
return "\'" + value + "\'"
def p_sequenceBlock(p):
'sequenceBlock : SEQUENCE IDENTIFIER OWNED BY IDENTIFIER PERIOD IDENTIFIER SEMICOLON'
debug("sequenceBlock")
#we find the table
if not p[5] in name_dict.keys():
msg = "Semantic error: Table '" + p[5] + \
"'given in ALTER SEQUENCE part couldn't be found.\n"
errprint(msg, ERRCODE["SEMANTIC"])
seq_table = name_dict[p[5]]
name = p[7] # name of the attribute
seq_attr = None
#search for the attribute
for attr in seq_table.attr_list:
if attr.name == name:
seq_attr = attr
break
#we didn't find it, there is a prob (shouldn't happen with not-edited dump but you never know)
if seq_attr is None:
msg = "Semantic error: Couldn't find the attribute which SEQUENCE '" + p[2] \
+ "' refers to in table '" + p[5] \
+ "' while processing a " + constr + ".\n"
errprint(msg, ERRCODE["INPUT"])
#now we simply change the data type to corresponding serial type
if seq_attr.data_type == "integer":
seq_attr.data_type = "serial"
elif seq_attr.data_type == "bigint":
seq_attr.data_type = "bigserial"
#any other type that has a filling sequence gets serial dtype
#gonna get 'DEFAULT' as insert value
else:
seq_attr.data_type = "serial"
def p_alterBody(p):
'''alterBody : ADD CONSTRAINT IDENTIFIER PRIMARY KEY LPAREN idOrDtypeName RPAREN
| ADD CONSTRAINT IDENTIFIER FOREIGN KEY LPAREN idOrDtypeName RPAREN REFERENCES IDENTIFIER LPAREN IDENTIFIER RPAREN
| multi_attr_constr'''
debug("alterBody")
global alter_attr
global alter_table
alter_attr = None
alter_name = None
#the multi_attr constraint has been solved already
#this goes just for the KEYs
if len(p) != 2:
constr = p[4] + " " + p[5]
#finding the attribute to get altered
for attr in alter_table.attr_list:
if attr.name == p[7]: # p[7] stands for the attribute name in both cases
alter_attr = attr
break
#did we find anything?
if alter_attr is None:
msg = "Input error: Couldn't find the given attribute name '" + p[7] \
+ "' in the list of attributes of table '" + alter_table.name \
+ "' while processing a " + constr + ".\n"
errprint(msg, ERRCODE["INPUT"])
alter_attr.constraint_flag = True
alter_attr.constraint_cnt += 1 # increments the cnt
alter_attr.set_constraint(constr)
#for foreign key
if p[4] == 'FOREIGN':
#existence of foreign table check
if not p[10] in name_dict.keys():
msg = "Input error: Foreign table '" + \
p[10] + "' couldn't be found.\n"
errprint(msg, ERRCODE["INPUT"])
alter_attr.fk_table = name_dict[p[10]]
#gets the foreign table object
for attr in alter_attr.fk_table.attr_list:
if attr.name == p[12]:
alter_attr.fk_attribute = attr
break
#existence of foreign attribute check
if alter_attr.fk_attribute is None:
msg = "Input error: Foreign attribute '" + p[12] \
+ "' couldn't be found in table '" + p[10] \
+ "' while processing a " + constr + ".\n"
errprint(msg, ERRCODE["INPUT"])
def fm_textbank(table, attr):
#opening the file
if not attr.textbank_open:
path = attr.fill_parameters[0]
#opening file
try:
attr.textbank_fd = open(path, 'r')
except IOError:
msg = "Input error: The given file of path '" + \
path + "' cannot be oppened."
errprint(msg, ERRCODE["INPUT"])
#getting line count
for i, l in enumerate(attr.textbank_fd):
pass
attr.textbank_linecnt = i # ignores the last line assuming it's empty (else it would be i+1)
attr.textbank_open = True # sets the flag
x = True # more cycles flag
timeout = 0
while x:
if timeout >= 100:
msg = "Runtime error: The timeout for finding unique value in given textbank '" + path + "' exceeded."
errprint(msg, ERRCODE["RUNTIME"])
x = False
attr.textbank_fd.seek(0) # sets at the beginning
num = random.randint(1, attr.textbank_linecnt)
#gets random number from 0 to the line count
i = 1 # start index
#cycle to find the right line
for line in attr.textbank_fd:
if i == num: # once we get to the wanted line
value = line.rstrip(
) # it contains the value we want (cuts the newline)
break;
i = i + 1 # increments the index
#some checking for
if attr.data_type == "CHAR" or attr.data_type == "VARCHAR":
length = attr.parameters[0]
#NOTE: CHAR speciality. The databank is not checked for CHAR length
# validity. If not suitable value is received, the received
# string is either cut or multiply concatenated and then cut.
# Provided textbank is fully at user's responsibility.
if attr.data_type == "CHAR":
while len(value) < length:
value = value + value
value = value[:length] # cuts to the desired size
#now checking for UNIQUE/PRIMARY KEY
#if this constraint present, we check the retrieved value
#for presence in attribute.values_list. If it's not there yet,
#the value is stored in the list and approved - else we repeat all above
#This might get very time expensive with textbank method
#so there is a 100 iterations timeout set
if attr.constraint_type == "primary_key" or attr.constraint_type == "unique":
if value in attr.values_list:
x = True
timeout += 1
else:
break
attr.textbank_fd.seek(
0) # for potential other attributes using the same textbank
return "'" + value + "'"
def iniciate_fk(table_list):
global TABLE_DICT
create_table_dict(table_list)
for table in table_list:
if table.fill_count == "FILLED": # this table is prefilled in the database
table.solved = True # so we are not filling it here
if table.fk: # if this table contains foreign keys
for attr in table.attr_list: # we cycle over its attributes
#first compatibility-of-constraints check
if attr.constraint_flag and attr.constraint_cnt > 1:
#TODO:check if unique and primary key can be together
check1 = attr.unique and attr.primary_key
check2 = attr.null and attr.primary_key
check3 = attr.null and attr.not_null
check = check1 or check2 or check3
if check:
msg = "Input error: Not compatible constraints used for attribute '" \
+ attr.name + "', table '" + table.name + "'.\n"
errprint(msg, ERRCODE["INPUT"])
#and the main part, getting the foreign key dependences done
if attr.foreign_key:
ftable_name = attr.fk_table # stores the name of the foreign table and its attribute
fattr_name = attr.fk_attribute
#checks if this table actually exists in our dictionary
if ftable_name in TABLE_DICT:
ftable = TABLE_DICT[
ftable_name] # foreign table object
else:
msg = "Input error: The given foreign table '" + \
ftable_name + "' doesn't exist."
errprint(msg, ERRCODE["INPUT"])
#we know the table exists, now let's try to find the attribute
fattr = None
for f_attribute in ftable.attr_list:
if f_attribute.name == fattr_name: # this is the attribute foreign key points to
fattr = f_attribute # foreign attribute object
break
if fattr is None:
msg = "Semantic error: The given foreign attribute '" + fattr_name + "' doesn't exist in table '" \
+ ftable_name + "'."
errprint(msg, ERRCODE["SEMANTIC"])
#types not compatible
#print "FATTR", fattr.data_type, "ATTR", attr.data_type
#print "FATTR KEY ->",COMPATIBLE[fattr.data_type]
if fattr.data_type != attr.data_type and COMPATIBLE[fattr.data_type] != attr.data_type:
msg = "Semantic error: The foreign-key-type attribute '" + attr.name + "'s data type doesn't correspond with " \
"the data type of the attribute it references to. Table: '" + table.name + "'\n"
errprint(msg, ERRCODE["SEMANTIC"])
#data types might be the same but if one is array and other is not, it would mean trouble
elif fattr.data_type == attr.data_type and not (fattr.array_flag == attr.array_flag):
msg = "Semantic error: The foreign-key-type attribute '" + attr.name + "'s data type doesn't correspond with " \
"the data type of the attribute it references to. One is array, one is not. Table: '" + table.name + "'\n"
errprint(msg, ERRCODE["SEMANTIC"])
#let's check that array of arrays of arrays doesn't refer to only an array
elif fattr.data_type == attr.data_type and fattr.array_flag and attr.array_flag:
if fattr.array_dim_cnt != attr.array_dim_cnt:
msg = "Semantic error: The foreign-key-type attribute '" + attr.name + "' has a different count of " \
+ "dimensions than the array attribute it references to. Table: '" + table.name + "'\n"
errprint(msg, ERRCODE["SEMANTIC"])
#NOTE: As stated in postgresql docu, all arrays are now behaving as infinite,
# max size given or not. So for now there is no reason to check compatibility
# of individual array sizes. May change.
#now we have both objects, we can store them in the variables
attr.fk_table = ftable
attr.fk_attribute = fattr
attr.fk_attribute.fk_pointed = True
attr.fk_attribute.fk_times += 1 # increments count of "how many points at me"
def get_values(table):
unique_values = []
#to store all values that create a unique/pk group
values = ""
for attr in table.attr_list:
new_val = None
if attr.foreign_key: # foreign key is filled from existing values
new_val = get_foreign(attr)
elif attr.serial:
new_val = "DEFAULT" # next sequence
elif attr.array_flag: # array needs a special treatment
new_val = get_array(table, attr)
else:
func = 'new_val = ' + attr.fill_method + '(table,attr)'
try:
exec func # new_val = fill_method(attributes)
except AttributeError:
msg = "Internal error. Trouble using '" + attr.fill_method + "' method on attribute '" \
+ attr.name + "', table '" + table.name + "'.\n"
#+ "NOTE: This may also be caused by a non existing method inserted.\n"
errprint(msg, ERRCODE["INTERNAL"])
#these combinations are filled with embedded SELECT query so no checking for them
test0 = attr.unique and attr.foreign_key and not attr.fk_attribute.serial
test1 = attr.unique and attr.foreign_key and not attr.fk_table.fill_count == "FILLED"
#serial is unique by its sequence, if it overflows because of low capacity, it's user's problem
test2 = attr.unique and not attr.serial
test3 = attr.primary_key and not attr.serial
#if one test true, we must ensure the inserted value hasn't been used yet
if test0 or test1 or test2 or test3:
timeout = 0
while not check_unique(attr, new_val): # validity check if there is unique/primary key constraint
if timeout >= 100:
msg = "Runtime error: The timeout for finding new unique value for attribute '" + attr.name + "' exceeded.\n" \
"Tip: Check if the given fill method offers enough unique values.\n"
errprint(msg, ERRCODE["RUNTIME"])
if attr.foreign_key:
new_val = get_foreign(attr)
else:
exec func # we call the method again (and again)
timeout += 1
#DEFAULT appearance chance
if attr.default:
chance = random.randint(0, 100)
if chance < attr.default_value:
new_val = 'DEFAULT'
#NULL appearance chance
if attr.null:
chance = random.randint(0, 100)
if chance < attr.constraint_parameters:
new_val = 'NULL'
values = values + str(new_val) + ", " # concatenates the new value with the rest and divides with a ','
if attr.fk_pointed or attr.unique or attr.primary_key: # we will need these values either for filling foreign key attributes
if attr.unique_group and not attr.fk_pointed: # this value has meaning only in group
unique_values.append(new_val)
elif attr.unique_group and attr.fk_pointed: # value important alone and in group as well
attr.values_list.append(new_val)
unique_values.append(new_val)
else:
attr.values_list.append(
new_val) # value important alone
values = values[:-2]
#removes the ',' from the end of the string once we end
return {'values': values, 'unique_values': unique_values}
def get_array(table, attr):
#as stated in the docu, only BOX type uses semicolon as a delimiter character
if attr.data_type == "BOX":
delim = ";"
else:
delim = ","
#---------------------------
cnt = attr.array_dim_cnt
val_list = []
total = 1
#for [x][y][z] we get value of x*y*z to know how many final values we want
for x in attr.array_dim_size:
total = total * x
func = 'new_val = ' + attr.fill_method + '(table,attr)'
#now we get the values and store them
for i in range(0, total):
try:
exec func # new_val = fill_method(attributes)
except AttributeError:
msg = "Internal error. Trouble using '" + attr.fill_method + "' method on attribute '" \
+ attr.name + "', table '" + table.name + "'.\n" \
# + "NOTE: This may also be caused by a non existing method inserted.\n"
errprint(msg, ERRCODE["INTERNAL"])
if new_val[0] == "'" and new_val[-1] == "'":
new_val = new_val[1:-1] # cuts both the '
new_val = "\"" + new_val + \
"\"" # double quotes if the val contained commas or curly braces
val_list.append(
new_val) # we append the newly received value to the list
#now we'll put the array of cnt dimensions together (=the final value to fill the db with)
old_list = val_list
new_list = []
#cycles dimension-times
for i in range(0, cnt):
j = cnt - (i+1) # reverse the indexing so we go from back
size = attr.array_dim_size[j]
total = total / size # we now have two separate numbers: 'total'-times we want field of 'size' values
#cycles (the current dimension cnt - 1)-times
for x in range(0, total): # for [3][2][2] this happens 3*2 times, next cycle 3 times etc.
new_val = "{"
#cycles size-times of the currently last dimension
for y in range(0, size):
val = old_list.pop()
new_val = new_val + val + delim
new_val = new_val[:-1] + \
"}" # cut the last delimiter and ads the final '{'
new_list.append(new_val)
#now all old_list values should be used and in concatenated form stored in new_list
#we replace old_list with new_list and create new new_list
old_list = new_list
new_list = []
#once we finally get out off this ugly cycle chaos, old_list should contain one item
#made of all previous items etc.
new_val = "'" + old_list.pop() + "'"
return new_val
else: # stdout
DEST = "stdout"
if args.count:
fill_cnt = args.count
else:
fill_cnt = 10 # default
#opening given file
try:
f = open(args.src, 'r')
except IOError:
msg = "Input error: The given file of path '" + args.src + \
"' cannot be oppened.\n"
errprint(msg, ERRCODE["INPUT"])
#opening temp file
try:
#tempf = open("tempfile", 'w')
tempf = tempfile.TemporaryFile()
except IOError:
msg = "Runtime error: Did not manage to create a temporary file 'tempfile'\n."
errprint(msg, ERRCODE["RUNTIME"])
#Filters the dump so we get only queries we are interested in
preparse(f, tempf)
#Close the dump file
f.close()
def __gen_plog(self, max_rev):
# 最早一个拥有错误的版本，用来以后检查的起始点
min_rev_has_error = max_rev
os.system("if not exist {0} mkdir {0}".format(
config.get_dir_pvs_plogs()))
db = EasySqlite('rfp.db')
for parent, dirnames, filenames in os.walk("temp", followlinks=True):
progressbar.set_total(len(filenames))
for file in filenames:
file_path = os.path.join(parent, file)
filename = os.path.splitext(file)[0]
output_file_path = "{0}\\{1}.plog".format(
config.get_dir_pvs_plogs(), filename)
if os.path.exists(output_file_path):
os.remove(output_file_path)
xmlRoot = etree.parse(file_path)
pathEle = xmlRoot.find('./SourceFiles/Path')
src_path = pathEle.text
printer.aprint(self.get_name() + '文件{0}检查开始'.format(src_path))
cmd = 'pvs-studio_cmd.exe --target "{0}" --output "{1}" --platform "x64" --configuration "Release" --sourceFiles "{2}" --settings "{3}" --excludeProjects {4} 2>>pvs_err.log'.format(
config.get_dir_sln(), output_file_path, file_path,
config.get_path_pvs_setting(),
config.get_exclude_projects())
ret = os.system(cmd)
if (ret & 1) / 1 == 1:
printer.errprint(
"PVS-Studio: error (crash) during analysis of some source file(s)"
)
if (ret & 2) / 2 == 1:
printer.errprint("PVS-Studio: GeneralExeption")
if (ret & 4) / 4 == 1:
printer.errprint(
"PVS-Studio: some of the command line arguments passed to the tool were incorrect"
)
if (ret & 8) / 8 == 1:
printer.errprint(
"PVS-Studio: specified project, solution or analyzer settings file were not found"
)
if (ret & 16) / 16 == 1:
printer.errprint(
"PVS-Studio: specified configuration and (or) platform were not found in a solution file"
)
if (ret & 32) / 32 == 1:
printer.errprint(
"PVS-Studio: solution file or project is not supported or contains errors"
)
if (ret & 64) / 64 == 1:
printer.errprint(
"PVS-Studio: incorrect extension of analyzed project or solution"
)
if (ret & 128) / 128 == 1:
printer.errprint(
"PVS-Studio: incorrect or out-of-date analyzer license"
)
if (ret & 256) / 256 == 1:
has_error = True
printer.warnprint(
"PVS-Studio: some issues were found in the source code"
)
if (ret & 512) / 512 == 1:
printer.errprint(
"PVS-Studio: some issues were encountered while performing analyzer message suppression"
)
if (ret & 1024) / 1024 == 1:
printer.errprint(
"PVS-Studio: indicates that analyzer license will expire in less than a month"
)
if ret == 0:
has_error = False
print("pvs-studio ret: " + str(ret))
cur_file_max_rev = 0
logs_json = []
logsRoot = xmlRoot.find('logs')
for log in logsRoot.iter('log'):
log_json = {
"rev": log.attrib["rev"],
"author": log.attrib["author"],
"msg": log.attrib["msg"]
}
logs_json.append(log_json)
revision = int(log.attrib["rev"])
if cur_file_max_rev < revision:
cur_file_max_rev = revision
db.execute(
"delete from " + self.CONST_TABLE_NAME +
" where file_path = ?", [src_path], False, True)
db.execute(
"delete from " + self.CONST_TABLE_NAME +
"_fts where file_path = ?", [src_path], False, True)
# 更新进度条用
progressbar.add(1)
if has_error:
plogXmlRoot = etree.parse(output_file_path)
analysisLogs = plogXmlRoot.findall(
'PVS-Studio_Analysis_Log')
ignoreCnt = 0
for analysisLog in analysisLogs:
errCode = analysisLog.find('ErrorCode').text
if errCode is None:
continue
if errCode.lower() in (code.lower()
for code in self.excludedCodes):
plogXmlRoot.getroot().remove(analysisLog)
ignoreCnt = ignoreCnt + 1
if len(analysisLogs) == ignoreCnt:
os.remove(output_file_path)
continue
plogXmlRoot.write(output_file_path)
project = analysisLogs[0].find('Project').text
filename = analysisLogs[0].find('ShortFile').text
log_str = json.dumps(log_json)
res_ignore = db.execute(
"select * from " + self.CONST_TABLE_NAME + "_ignore" +
" where rev=? and project=? and file=?",
(cur_file_max_rev, project, filename), False, False)
if filename == 'Dump.cpp':
if len(res_ignore) == 0:
print("Dump cannot find", cur_file_max_rev,
project, filename)
if len(res_ignore) != 0:
os.remove(output_file_path)
continue
if min_rev_has_error < cur_file_max_rev:
min_rev_has_error = cur_file_max_rev
db.execute(
"insert into " + self.CONST_TABLE_NAME +
" values (?, ?, ?, current_timestamp, ?, ?);",
(project, filename, src_path, output_file_path,
log_str), False, True)
body_str = '{0} {1} {2}'.format(project, filename, log_str)
db.execute(
"insert into " + self.CONST_TABLE_NAME +
"_fts values (?, ?);", (src_path, body_str), False,
True)
printer.aprint(self.get_name() +
'生成 {0} 的网页报告...'.format(src_path))
self.__convert_to_html(output_file_path)
printer.aprint(self.get_name() + '文件{0}检查结束'.format(src_path))
return min_rev_has_error
args = arg_parser.parse_args()
if args.source: # we've been given a custom source path
src = args.source
else:
home = os.path.expanduser('~') # get the home directory for this user
src = home + "/dsl.txt" # creates the path representing ~/dsl.txt
#opening file
try:
f = open(src, 'r')
except IOError:
msg = "Input error: The source file couldn't be oppened."
errprint(msg, ERRCODE["INPUT"])
#reading file
#for line in f:
# print line
table_list = parser.dsl_parser(f)
#Close file
f.close()
#Calls the db filler
db_filler(table_list)
def p_error(p):
msg = "Syntax error. Trouble with " + repr(str(
p.value)) + ". Line:" + str(p.lineno) + ".\n"
errprint(msg, ERRCODE["SYNTACTIC"])
global err
err = True # sets the flag
