def __init__(self, calibrationFile, analyser="VNA"):
self.laserPositioner = LaserPositioner(ProbeCalibration.fromFile(calibrationFile))
if analyser == "VNA":
self.analyzer = device.knownDevices["networkAnalyzer"]
self.analyzer._hardPresetMethod = self.laserPositioner.robot.strobeLowGpio1
elif analyser == "SA":
self.analyzer = device.knownDevices["spectrumAnalyzer"]
self.analyzer.reset()
self.analyzer.span = Frequency(1000, "MHz")
self.analyzer.centerFrequency = Frequency(500, "MHz")
self.analyzer.numberOfAveragingPoints = 100 # 500 for D3
else:
raise ValueError, "Analyser choice not recognised"
# self.powerSupply = None
self.powerSupply = device.knownDevices["powerSupply"]
self.powerSupply.setChannelParameters(4, Voltage(12.0, "V"), Current(0.7, "A"))
self.powerSupply.setChannelParameters(3, Voltage(9.0, "V"), Current(0.25, "A"))
self.powerSupply.setChannelParameters(2, Voltage(5.0, "V"), Current(1.00, "A"))
self.powerSupply.setChannelParameters(1, Voltage(3.3, "V"), Current(0.7, "A"))
def __init__(self,calibrationFile,analyser='VNA'):
self.laserPositioner = LaserPositioner(ProbeCalibration.fromFile(calibrationFile))
if analyser == 'VNA':
self.analyzer = device.knownDevices['networkAnalyzer']
self.analyzer._hardPresetMethod = self.laserPositioner.robot.strobeLowGpio1
elif analyser == 'SA':
self.analyzer = device.knownDevices['spectrumAnalyzer']
self.analyzer.reset()
self.analyzer.span = Frequency(1000,'MHz')
self.analyzer.centerFrequency = Frequency(500,'MHz')
self.analyzer.numberOfAveragingPoints = 100 #500 for D3
else:
raise ValueError, 'Analyser choice not recognised'
self.powerSupply = None
# self.powerSupply = device.knownDevices['powerSupply']
# self.powerSupply.setChannelParameters(4,Voltage(12.0,'V'),Current(1.4,'A'))
# self.powerSupply.setChannelParameters(3,Voltage(9.0,'V'),Current(0.25,'A'))
# self.powerSupply.setChannelParameters(2,Voltage(5.0,'V'),Current(1.00,'A'))
# self.powerSupply.setChannelParameters(1,Voltage(3.3,'V'),Current(0.7,'A'))
if not(self.powerSupply):
print "Warning: the power supply is not remote controlled. If you need an LNA, switch it on manually."
class NearFieldMode:
def __init__(self, calibrationFile, analyser="VNA"):
self.laserPositioner = LaserPositioner(ProbeCalibration.fromFile(calibrationFile))
if analyser == "VNA":
self.analyzer = device.knownDevices["networkAnalyzer"]
self.analyzer._hardPresetMethod = self.laserPositioner.robot.strobeLowGpio1
elif analyser == "SA":
self.analyzer = device.knownDevices["spectrumAnalyzer"]
self.analyzer.reset()
self.analyzer.span = Frequency(1000, "MHz")
self.analyzer.centerFrequency = Frequency(500, "MHz")
self.analyzer.numberOfAveragingPoints = 100 # 500 for D3
else:
raise ValueError, "Analyser choice not recognised"
# self.powerSupply = None
self.powerSupply = device.knownDevices["powerSupply"]
self.powerSupply.setChannelParameters(4, Voltage(12.0, "V"), Current(0.7, "A"))
self.powerSupply.setChannelParameters(3, Voltage(9.0, "V"), Current(0.25, "A"))
self.powerSupply.setChannelParameters(2, Voltage(5.0, "V"), Current(1.00, "A"))
self.powerSupply.setChannelParameters(1, Voltage(3.3, "V"), Current(0.7, "A"))
# self.switchPlatform = device.knownDevices['switchPlatform']
# self.switchPlatform.closeSwitch('DUTtoSAorVNA')
def prepare(self):
self.laserPositioner.prepare()
def tearDown(self):
if hasattr(self, "_parkPosition"):
self.laserPositioner.robot.setLocation(self._parkPosition)
self.laserPositioner.tearDown()
def sweep(self, origin, probeZone, resultPath, pitch):
if self.powerSupply:
self.powerSupply.turnChannelOn(1)
self.powerSupply.turnChannelOn(2)
self.powerSupply.turnChannelOn(3)
self.powerSupply.turnChannelOn(4)
if isinstance(self.analyzer, SpectrumAnalyzer):
self.analyzer.measure() # just to check that it responds
self.analyzer.align()
else:
self.analyzer.measure(1, 0) # just to check that it responds
frequencies = self.analyzer.frequency.f
(xGrid, yGrid) = numpy.meshgrid(
numpy.arange(probeZone.bottomLeft[0], probeZone.topRight[0], pitch.asUnit("m")),
numpy.arange(probeZone.bottomLeft[1], probeZone.topRight[1], pitch.asUnit("m")),
)
zPosition = probeZone.height
xGrid = xGrid.T
yGrid = yGrid.T
try:
for corner in [(0, 0), (-1, 0), (-1, -1), (0, -1)]:
self.laserPositioner.setProbeLocation(
Position(numpy.array([xGrid[corner], yGrid[corner], zPosition]), "m")
)
complexVoltages = []
startTime = time.clock()
(resultFolder, fileName) = os.path.split(resultPath)
imageName = fileName.split("-")[0]
with NfsFile(
resultFolder,
fileName,
imageName=imageName,
calibration=self.laserPositioner.calibration.electrical,
frequencies=frequencies,
) as nfsFile:
with GracefulInterruptHandler() as handler:
for (pointNumber, xPosition, yPosition) in zip(range(xGrid.size), xGrid.flat, yGrid.flat):
newPosition = Position(numpy.array([xPosition, yPosition, zPosition]), "m")
self.laserPositioner.setProbeLocation(newPosition, highSpeed=True)
if isinstance(self.analyzer, SpectrumAnalyzer):
naturalPowers = numpy.power(10.0, self.analyzer.measure() / 10.0)
naturalVoltages = numpy.sqrt(naturalPowers * 50.0)
else:
naturalVoltages = numpy.sqrt(50.0) * self.analyzer.measure(1, 0).s[:, 0, 0]
complexVoltages.append(naturalVoltages)
nfsFile.writePoint(newPosition - origin, naturalVoltages)
pointProgress = (pointNumber + 1.0) / xGrid.size
remainingTimeEstimation = (time.clock() - startTime) * (1 / pointProgress - 1)
sys.stdout.write(
"\r{h}h{m}m remaining...".format(
h=int(remainingTimeEstimation / 3600.0), m=int((remainingTimeEstimation % 3600) / 60)
)
)
if handler.interrupted:
break
print "Sweep took {0:.1f}s".format(time.clock() - startTime)
finally:
print "Shutting down..."
if self.powerSupply:
self.powerSupply.turnChannelOff(2)
self.powerSupply.turnChannelOff(1)
self.powerSupply.turnChannelOff(3)
self.powerSupply.turnChannelOff(4)
# self.laserPositioner.robot.goSafe()
complexVoltagesGrid = numpy.array(complexVoltages).reshape(xGrid.shape + frequencies.shape)
return (xGrid, yGrid, zPosition, complexVoltagesGrid, frequencies)
