def __init__(self, name, profile_dict, inherit_order):
self.name = name
self.inherit_order = inherit_order
self.ignore_paths = _ensure_list(profile_dict.get("ignore-paths", []))
# The 'ignore' directive is an old one which should be deprecated at some point
self.ignore_patterns = _ensure_list(profile_dict.get("ignore-patterns", []) + profile_dict.get("ignore", []))
self.output_format = profile_dict.get("output-format")
self.output_target = profile_dict.get("output-target")
self.autodetect = profile_dict.get("autodetect")
self.uses = [
uses for uses in _ensure_list(profile_dict.get("uses", [])) if uses in ("django", "celery", "flask")
]
self.max_line_length = profile_dict.get("max-line-length")
# informational shorthands
self.strictness = profile_dict.get("strictness")
self.test_warnings = profile_dict.get("test-warnings")
self.doc_warnings = profile_dict.get("doc-warnings")
self.member_warnings = profile_dict.get("member-warnings")
# TODO: this is needed by Landscape but not by prospector; there is probably a better place for it
self.requirements = _ensure_list(profile_dict.get("requirements", []))
self.python_targets = _ensure_list(profile_dict.get("python-targets", []))
for tool in TOOLS.keys():
conf = {"disable": [], "enable": [], "run": None, "options": {}}
conf.update(profile_dict.get(tool, {}))
if self.max_line_length is not None and tool in ("pylint", "pep8"):
conf["options"]["max-line-length"] = self.max_line_length
setattr(self, tool, conf)
def __init__(self, name, profile_dict):
self.name = name
self.inherits = profile_dict['inherits']
self.ignore = profile_dict['ignore']
for tool in TOOLS.keys():
setattr(self, tool, profile_dict[tool])
def __init__(self, name, profile_dict, inherit_order):
self.name = name
self.inherit_order = inherit_order
self.ignore_paths = _ensure_list(profile_dict.get("ignore-paths", []))
# The 'ignore' directive is an old one which should be deprecated at some point
self.ignore_patterns = _ensure_list(profile_dict.get("ignore-patterns", []) + profile_dict.get("ignore", []))
self.output_format = profile_dict.get("output-format")
self.autodetect = profile_dict.get("autodetect")
self.uses = [uses for uses in _ensure_list(profile_dict.get("uses", [])) if uses in ("django", "celery")]
self.max_line_length = profile_dict.get("max-line-length")
# informational shorthands
self.strictness = profile_dict.get("strictness")
self.test_warnings = profile_dict.get("test-warnings")
self.doc_warnings = profile_dict.get("doc-warnings")
self.member_warnings = profile_dict.get("member-warnings")
# TODO: this is needed by Landscape but not by prospector; there is probably a better place for it
self.requirements = _ensure_list(profile_dict.get("requirements", []))
for tool in TOOLS.keys():
conf = {"disable": [], "enable": [], "run": None, "options": {}}
conf.update(profile_dict.get(tool, {}))
if self.max_line_length is not None and tool in ("pylint", "pep8"):
conf["options"]["max-line-length"] = self.max_line_length
setattr(self, tool, conf)
def merge(self, other_profile):
self.ignore = list(set(self.ignore + other_profile.ignore))
self.inherits = list(set(self.inherits + other_profile.inherits))
for tool in TOOLS.keys():
merged = _merge_dict(getattr(self, tool), getattr(other_profile, tool))
setattr(self, tool, merged)
def build_manager():
manager = soc.ConfigurationManager("prospector")
manager.add(soc.BooleanSetting("zero_exit", default=False))
manager.add(soc.BooleanSetting("autodetect", default=True))
manager.add(soc.ListSetting("uses", soc.String, default=[]))
manager.add(soc.BooleanSetting("blending", default=True))
manager.add(soc.BooleanSetting("doc_warnings", default=None))
manager.add(soc.BooleanSetting("test_warnings", default=None))
manager.add(soc.BooleanSetting("no_style_warnings", default=None))
manager.add(soc.BooleanSetting("member_warnings", default=None))
manager.add(soc.BooleanSetting("full_pep8", default=None))
manager.add(soc.IntegerSetting("max_line_length", default=None))
manager.add(soc.BooleanSetting("messages_only", default=False))
manager.add(soc.BooleanSetting("summary_only", default=False))
manager.add(soc.BooleanSetting("quiet", default=False))
manager.add(
soc.ListSetting(
"output_format",
OutputChoice(sorted(FORMATTERS.keys())),
default=None,
))
manager.add(soc.BooleanSetting("absolute_paths", default=False))
manager.add(
soc.ListSetting(
"tools",
soc.Choice(sorted(TOOLS.keys())),
default=None,
))
manager.add(soc.ListSetting("with_tools", soc.String, default=[]))
manager.add(soc.ListSetting("without_tools", soc.String, default=[]))
manager.add(soc.ListSetting("profiles", soc.String, default=[]))
manager.add(soc.ListSetting("profile_path", soc.String, default=[]))
manager.add(
soc.ChoiceSetting(
"strictness",
["veryhigh", "high", "medium", "low", "verylow"],
default=None,
))
manager.add(soc.BooleanSetting("show_profile", default=False))
manager.add(soc.BooleanSetting("no_external_config", default=False))
manager.add(soc.BooleanSetting("legacy_tool_names", default=False))
manager.add(soc.StringSetting("pylint_config_file", default=None))
manager.add(soc.StringSetting("path", default=None))
manager.add(soc.ListSetting("ignore_patterns", soc.String, default=[]))
manager.add(soc.ListSetting("ignore_paths", soc.String, default=[]))
manager.add(soc.BooleanSetting("die_on_tool_error", default=False))
manager.add(soc.BooleanSetting("include_tool_stdout", default=False))
manager.add(soc.BooleanSetting("direct_tool_stdout", default=False))
return manager
def tool_names(self):
# TODO: this is currently a circular import, which is why it is not at the top of
# the module. However, there's no obvious way to get around this right now...
# pylint: disable=cyclic-import
from prospector.tools import TOOLS
return TOOLS.keys()
def tool_names(self):
# TODO: this is currently a circular import, which is why it is not at the top of
# the module. However, there's no obvious way to get around this right now...
# pylint: disable=cyclic-import
from prospector.tools import TOOLS
return TOOLS.keys()
def _merge_profile_dict(priority, base):
# copy the base dict into our output
out = dict(base.items())
for key, value in priority.items():
if key in (
"strictness",
"doc-warnings",
"test-warnings",
"member-warnings",
"output-format",
"autodetect",
"max-line-length",
):
# some keys are simple values which are overwritten
out[key] = value
elif key in (
"ignore",
"ignore-patterns",
"ignore-paths",
"uses",
"requirements",
"python-targets",
"output-target",
):
# some keys should be appended
out[key] = _ensure_list(value) + _ensure_list(base.get(key, []))
elif key in TOOLS.keys():
# this is tool config!
out[key] = _merge_tool_config(value, base.get(key, {}))
return out
def build_manager():
manager = soc.ConfigurationManager('prospector')
manager.add(soc.BooleanSetting('zero_exit', default=False))
manager.add(soc.BooleanSetting('autodetect', default=True))
manager.add(soc.ListSetting('uses', soc.String, default=[]))
manager.add(soc.BooleanSetting('blending', default=True))
manager.add(soc.BooleanSetting('common_plugin', default=True))
manager.add(soc.BooleanSetting('doc_warnings', default=None))
manager.add(soc.BooleanSetting('test_warnings', default=None))
manager.add(soc.BooleanSetting('no_style_warnings', default=None))
manager.add(soc.BooleanSetting('member_warnings', default=None))
manager.add(soc.BooleanSetting('full_pep8', default=None))
manager.add(soc.IntegerSetting('max_line_length', default=None))
manager.add(soc.BooleanSetting('messages_only', default=False))
manager.add(soc.BooleanSetting('summary_only', default=False))
manager.add(soc.ChoiceSetting(
'output_format',
sorted(FORMATTERS.keys()),
default=None,
))
manager.add(soc.BooleanSetting('absolute_paths', default=False))
manager.add(soc.ListSetting(
'tools',
soc.Choice(sorted(TOOLS.keys())),
default=None,
))
manager.add(soc.ListSetting('with_tools', soc.String, default=[]))
manager.add(soc.ListSetting('without_tools', soc.String, default=[]))
manager.add(soc.ListSetting('profiles', soc.String, default=[]))
manager.add(soc.ListSetting('profile_path', soc.String, default=[]))
manager.add(soc.ChoiceSetting(
'strictness',
['veryhigh', 'high', 'medium', 'low', 'verylow'],
default=None,
))
manager.add(soc.BooleanSetting('show_profile', default=False))
manager.add(soc.BooleanSetting('no_external_config', default=False))
manager.add(soc.StringSetting('pylint_config_file', default=None))
manager.add(soc.StringSetting('path', default=None))
manager.add(soc.ListSetting('ignore_patterns', soc.String, default=[]))
manager.add(soc.ListSetting('ignore_paths', soc.String, default=[]))
manager.add(soc.BooleanSetting('die_on_tool_error', default=False))
manager.add(soc.BooleanSetting('include_tool_stdout', default=False))
manager.add(soc.BooleanSetting('direct_tool_stdout', default=False))
# deprecated
manager.add(soc.BooleanSetting('loquacious_pylint', default=False))
return manager
def to_profile_dict(self):
thedict = {
'inherits': self.inherits,
'ignore': self.ignore,
}
for tool in TOOLS.keys():
thedict[tool] = getattr(self, tool)
def to_profile_dict(self):
thedict = {
'inherits': self.inherits,
'ignore': self.ignore,
}
for tool in TOOLS.keys():
thedict[tool] = getattr(self, tool)
def build_manager():
manager = soc.ConfigurationManager('prospector')
manager.add(soc.BooleanSetting('zero_exit', default=False))
manager.add(soc.BooleanSetting('autodetect', default=True))
manager.add(soc.ListSetting('uses', soc.String, default=[]))
manager.add(soc.BooleanSetting('blending', default=True))
manager.add(soc.BooleanSetting('doc_warnings', default=None))
manager.add(soc.BooleanSetting('test_warnings', default=None))
manager.add(soc.BooleanSetting('no_style_warnings', default=None))
manager.add(soc.BooleanSetting('member_warnings', default=None))
manager.add(soc.BooleanSetting('full_pep8', default=None))
manager.add(soc.IntegerSetting('max_line_length', default=None))
manager.add(soc.BooleanSetting('messages_only', default=False))
manager.add(soc.BooleanSetting('summary_only', default=False))
manager.add(soc.ListSetting(
'output_format',
OutputChoice(sorted(FORMATTERS.keys())),
default=None,
))
manager.add(soc.BooleanSetting('absolute_paths', default=False))
manager.add(soc.ListSetting(
'tools',
soc.Choice(sorted(TOOLS.keys())),
default=None,
))
manager.add(soc.ListSetting('with_tools', soc.String, default=[]))
manager.add(soc.ListSetting('without_tools', soc.String, default=[]))
manager.add(soc.ListSetting('profiles', soc.String, default=[]))
manager.add(soc.ListSetting('profile_path', soc.String, default=[]))
manager.add(soc.ChoiceSetting(
'strictness',
['veryhigh', 'high', 'medium', 'low', 'verylow'],
default=None,
))
manager.add(soc.BooleanSetting('show_profile', default=False))
manager.add(soc.BooleanSetting('no_external_config', default=False))
manager.add(soc.StringSetting('pylint_config_file', default=None))
manager.add(soc.StringSetting('path', default=None))
manager.add(soc.ListSetting('ignore_patterns', soc.String, default=[]))
manager.add(soc.ListSetting('ignore_paths', soc.String, default=[]))
manager.add(soc.BooleanSetting('die_on_tool_error', default=False))
manager.add(soc.BooleanSetting('include_tool_stdout', default=False))
manager.add(soc.BooleanSetting('direct_tool_stdout', default=False))
# deprecated
manager.add(soc.BooleanSetting('loquacious_pylint', default=False))
return manager
def merge(self, other_profile):
self.ignore = list(set(self.ignore + other_profile.ignore))
self.inherits = list(set(self.inherits + other_profile.inherits))
if other_profile.output_format is not None:
self.output_format = other_profile.output_format
for tool in TOOLS.keys():
merged = _merge_dict(getattr(self, tool), getattr(other_profile, tool))
setattr(self, tool, merged)
def _tool_names(with_deprecated: bool = True):
# TODO: this is currently a circular import, which is why it is not at the top of
# the module. However, there's no obvious way to get around this right now...
from prospector.tools import DEPRECATED_TOOL_NAMES, TOOLS # pylint: disable=import-outside-toplevel
tools = list(TOOLS.keys())
if with_deprecated:
tools += DEPRECATED_TOOL_NAMES.keys()
return tools
def build_manager():
manager = soc.ConfigurationManager('prospector')
manager.add(soc.BooleanSetting('autodetect', default=True))
manager.add(soc.ListSetting('uses', soc.String, default=[]))
manager.add(soc.BooleanSetting('blending', default=True))
manager.add(soc.BooleanSetting('common_plugin', default=True))
manager.add(soc.BooleanSetting('doc_warnings', default=False))
manager.add(soc.BooleanSetting('test_warnings', default=False))
manager.add(soc.BooleanSetting('style_warnings', default=True))
manager.add(soc.BooleanSetting('full_pep8', default=False))
manager.add(soc.IntegerSetting('max_line_length', default=None))
manager.add(soc.BooleanSetting('messages_only', default=False))
manager.add(soc.BooleanSetting('summary_only', default=False))
manager.add(
soc.ChoiceSetting(
'output_format',
sorted(FORMATTERS.keys()),
default='text',
))
manager.add(soc.BooleanSetting('absolute_paths', default=False))
manager.add(
soc.ListSetting(
'tools',
soc.Choice(sorted(TOOLS.keys())),
default=sorted(DEFAULT_TOOLS),
))
manager.add(soc.ListSetting('profiles', soc.String, default=[]))
manager.add(
soc.ChoiceSetting(
'strictness',
['veryhigh', 'high', 'medium', 'low', 'verylow'],
default='medium',
))
manager.add(
soc.ChoiceSetting(
'external_config',
['none', 'merge', 'only'],
default='only',
))
manager.add(soc.StringSetting('path', default=None))
manager.add(soc.ListSetting('ignore_patterns', soc.String, default=[]))
manager.add(soc.ListSetting('ignore_paths', soc.String, default=[]))
manager.add(soc.BooleanSetting('die_on_tool_error', default=False))
return manager
def build_manager():
manager = soc.ConfigurationManager('prospector')
manager.add(soc.BooleanSetting('autodetect', default=True))
manager.add(soc.ListSetting('uses', soc.String, default=[]))
manager.add(soc.BooleanSetting('blending', default=True))
manager.add(soc.BooleanSetting('common_plugin', default=True))
manager.add(soc.BooleanSetting('doc_warnings', default=False))
manager.add(soc.BooleanSetting('test_warnings', default=False))
manager.add(soc.BooleanSetting('style_warnings', default=True))
manager.add(soc.BooleanSetting('full_pep8', default=False))
manager.add(soc.IntegerSetting('max_line_length', default=None))
manager.add(soc.BooleanSetting('messages_only', default=False))
manager.add(soc.BooleanSetting('summary_only', default=False))
manager.add(soc.ChoiceSetting(
'output_format',
sorted(FORMATTERS.keys()),
default='text',
))
manager.add(soc.BooleanSetting('absolute_paths', default=False))
manager.add(soc.ListSetting(
'tools',
soc.Choice(sorted(TOOLS.keys())),
default=sorted(DEFAULT_TOOLS),
))
manager.add(soc.ListSetting('profiles', soc.String, default=[]))
manager.add(soc.ChoiceSetting(
'strictness',
['veryhigh', 'high', 'medium', 'low', 'verylow'],
default='medium',
))
manager.add(soc.ChoiceSetting(
'external_config',
['none', 'merge', 'only'],
default='only',
))
manager.add(soc.StringSetting('path', default=None))
manager.add(soc.ListSetting('ignore_patterns', soc.String, default=[]))
manager.add(soc.ListSetting('ignore_paths', soc.String, default=[]))
manager.add(soc.BooleanSetting('die_on_tool_error', default=False))
return manager
def _merge_profile_dict(priority, base):
# copy the base dict into our output
out = dict(base.items())
for key, value in priority.items():
if key in ('strictness', 'doc-warnings', 'test-warnings', 'member-warnings',
'output-format', 'autodetect', 'max-line-length',):
# some keys are simple values which are overwritten
out[key] = value
elif key in ('ignore', 'ignore-patterns', 'ignore-paths', 'uses', 'requirements'):
# some keys should be appended
out[key] = _ensure_list(value) + _ensure_list(base.get(key, []))
elif key in TOOLS.keys():
# this is tool config!
out[key] = _merge_tool_config(value, base.get(key, {}))
return out
def as_dict(self):
out = {
'ignore-paths': self.ignore_paths,
'ignore-patterns': self.ignore_patterns,
'output-format': self.output_format,
'autodetect': self.autodetect,
'uses': self.uses,
'max-line-length': self.max_line_length,
'member-warnings': self.member_warnings,
'doc-warnings': self.doc_warnings,
'test-warnings': self.test_warnings,
'strictness': self.strictness,
'requirements': self.requirements,
}
for tool in TOOLS.keys():
out[tool] = getattr(self, tool)
return out
def _merge_profile_dict(priority, base):
# copy the base dict into our output
out = dict(base.items())
for key, value in priority.items():
if key in ('strictness', 'doc-warnings', 'test-warnings', 'member-warnings',
'output-format', 'autodetect', 'max-line-length',):
# some keys are simple values which are overwritten
out[key] = value
elif key in ('ignore', 'ignore-patterns', 'ignore-paths', 'uses', 'requirements'):
# some keys should be appended
out[key] = _ensure_list(value) + _ensure_list(base.get(key, []))
elif key in TOOLS.keys():
# this is tool config!
out[key] = _merge_tool_config(value, base.get(key, {}))
return out
def as_dict(self):
out = {
"ignore-paths": self.ignore_paths,
"ignore-patterns": self.ignore_patterns,
"output-format": self.output_format,
"autodetect": self.autodetect,
"uses": self.uses,
"max-line-length": self.max_line_length,
"member-warnings": self.member_warnings,
"doc-warnings": self.doc_warnings,
"test-warnings": self.test_warnings,
"strictness": self.strictness,
"requirements": self.requirements,
}
for tool in TOOLS.keys():
out[tool] = getattr(self, tool)
return out
def as_dict(self):
out = {
'ignore-paths': self.ignore_paths,
'ignore-patterns': self.ignore_patterns,
'output-format': self.output_format,
'autodetect': self.autodetect,
'uses': self.uses,
'max-line-length': self.max_line_length,
'member-warnings': self.member_warnings,
'doc-warnings': self.doc_warnings,
'test-warnings': self.test_warnings,
'strictness': self.strictness,
'requirements': self.requirements,
}
for tool in TOOLS.keys():
out[tool] = getattr(self, tool)
return out
def as_dict(self):
out = {
"ignore-paths": self.ignore_paths,
"ignore-patterns": self.ignore_patterns,
"output-format": self.output_format,
"output-target": self.output_target,
"autodetect": self.autodetect,
"uses": self.uses,
"max-line-length": self.max_line_length,
"member-warnings": self.member_warnings,
"doc-warnings": self.doc_warnings,
"test-warnings": self.test_warnings,
"strictness": self.strictness,
"requirements": self.requirements,
"python-targets": self.python_targets,
}
for tool in TOOLS.keys():
out[tool] = getattr(self, tool)
return out
def __init__(self, name, profile_dict, inherit_order):
self.name = name
self.inherit_order = inherit_order
self.ignore_paths = _ensure_list(profile_dict.get('ignore-paths', []))
# The 'ignore' directive is an old one which should be deprecated at some point
self.ignore_patterns = _ensure_list(
profile_dict.get('ignore-patterns', []) + profile_dict.get('ignore', [])
)
self.output_format = profile_dict.get('output-format')
self.output_target = profile_dict.get('output-target')
self.autodetect = profile_dict.get('autodetect')
self.uses = [uses for uses in _ensure_list(profile_dict.get('uses', []))
if uses in ('django', 'celery', 'flask')]
self.max_line_length = profile_dict.get('max-line-length')
# informational shorthands
self.strictness = profile_dict.get('strictness')
self.test_warnings = profile_dict.get('test-warnings')
self.doc_warnings = profile_dict.get('doc-warnings')
self.member_warnings = profile_dict.get('member-warnings')
# TODO: this is needed by Landscape but not by prospector; there is probably a better place for it
self.requirements = _ensure_list(profile_dict.get('requirements', []))
self.python_targets = _ensure_list(profile_dict.get('python-targets', []))
for tool in TOOLS.keys():
conf = {
'disable': [],
'enable': [],
'run': None,
'options': {}
}
conf.update(profile_dict.get(tool, {}))
if self.max_line_length is not None and tool in ('pylint', 'pep8'):
conf['options']['max-line-length'] = self.max_line_length
setattr(self, tool, conf)
def __init__(self, name, profile_dict, inherit_order):
self.name = name
self.inherit_order = inherit_order
self.ignore_paths = _ensure_list(profile_dict.get('ignore-paths', []))
# The 'ignore' directive is an old one which should be deprecated at some point
self.ignore_patterns = _ensure_list(
profile_dict.get('ignore-patterns', []) + profile_dict.get('ignore', [])
)
self.output_format = profile_dict.get('output-format')
self.autodetect = profile_dict.get('autodetect')
self.uses = [uses for uses in _ensure_list(profile_dict.get('uses', []))
if uses in ('django', 'celery', 'flask')]
self.max_line_length = profile_dict.get('max-line-length')
# informational shorthands
self.strictness = profile_dict.get('strictness')
self.test_warnings = profile_dict.get('test-warnings')
self.doc_warnings = profile_dict.get('doc-warnings')
self.member_warnings = profile_dict.get('member-warnings')
# TODO: this is needed by Landscape but not by prospector; there is probably a better place for it
self.requirements = _ensure_list(profile_dict.get('requirements', []))
self.python_targets = _ensure_list(profile_dict.get('python-targets', []))
for tool in TOOLS.keys():
conf = {
'disable': [],
'enable': [],
'run': None,
'options': {}
}
conf.update(profile_dict.get(tool, {}))
if self.max_line_length is not None and tool in ('pylint', 'pep8'):
conf['options']['max-line-length'] = self.max_line_length
setattr(self, tool, conf)
def build_command_line_source():
parser_options = {
'description': 'Performs static analysis of Python code',
}
options = {
'autodetect': {
'flags': ['-A', '--no-autodetect'],
'help':
'Turn off auto-detection of frameworks and libraries used.'
' By default, autodetection will be used. To specify'
' manually, see the --uses option.',
},
'uses': {
'flags': ['-u', '--uses'],
'help':
'A list of one or more libraries or frameworks that the'
' project users. Possible values are: %s. This will be'
' autodetected by default, but if autodetection doesn\'t'
' work, manually specify them using this flag.' %
(', '.join(sorted(LIBRARY_ADAPTORS.keys())), )
},
'blending': {
'flags': ['-B', '--no-blending'],
'help':
'Turn off blending of messages. Prospector will merge'
' together messages from different tools if they represent'
' the same error. Use this option to see all unmerged'
' messages.',
},
'common_plugin': {
'flags': ['--no-common-plugin'],
},
'doc_warnings': {
'flags': ['-D', '--doc-warnings'],
'help': 'Include warnings about documentation.',
},
'test_warnings': {
'flags': ['-T', '--test-warnings'],
'help': 'Also check test modules and packages.',
},
'style_warnings': {
'flags': ['-8', '--no-style-warnings'],
'help':
'Don\'t create any warnings about style. This disables the'
' PEP8 tool and similar checks for formatting.',
},
'full_pep8': {
'flags': ['-F', '--full-pep8'],
'help':
'Enables every PEP8 warning, so that all PEP8 style'
' violations will be reported.',
},
'max_line_length': {
'flags': ['--max-line-length'],
'help':
'The maximum line length allowed. This will be set by the strictness if no'
' value is explicitly specified'
},
'messages_only': {
'flags': ['-M', '--messages-only'],
'help':
'Only output message information (don\'t output summary'
' information about the checks)',
},
'summary_only': {
'flags': ['-S', '--summary-only'],
'help':
'Only output summary information about the checks (don\'t'
'output message information)',
},
'output_format': {
'flags': ['-o', '--output-format'],
'help':
'The output format. Valid values are: %s' %
(', '.join(sorted(FORMATTERS.keys())), ),
},
'absolute_paths': {
'help':
'Whether to output absolute paths when referencing files'
'in messages. By default, paths will be relative to the'
'project path',
},
'tools': {
'flags': ['-t', '--tool'],
'help':
'A list of tools to run. Possible values are: %s. By'
' default, the following tools will be run: %s' % (
', '.join(sorted(TOOLS.keys())),
', '.join(sorted(DEFAULT_TOOLS)),
),
},
'profiles': {
'flags': ['-P', '--profile'],
'help':
'The list of profiles to load. A profile is a certain'
' \'type\' of behaviour for prospector, and is represented'
' by a YAML configuration file. A full path to the YAML'
' file describing the profile must be provided.',
},
'strictness': {
'flags': ['-s', '--strictness'],
'help':
'How strict the checker should be. This affects how'
' harshly the checker will enforce coding guidelines. The'
' default value is "medium", possible values are'
' "veryhigh", "high", "medium", "low" and "verylow".',
},
'external_config': {
'flags': ['-e', '--external-config'],
'help':
'Determines how prospector should behave when'
' configuration already exists for a tool. By default,'
' prospector will use existing configuration. A value of'
' "merge" will cause prospector to merge existing config'
' and its own config, and "none" means that prospector'
' will use only its own config.',
},
'ignore_patterns': {
'flags': ['-I', '--ignore-patterns'],
'help':
'A list of paths to ignore, as a list of regular'
' expressions. Files and folders will be ignored if their'
' full path contains any of these patterns.',
},
'ignore_paths': {
'flags': ['-i', '--ignore-paths'],
'help':
'A list of file or directory names to ignore. If the'
' complete name matches any of the items in this list, the'
' file or directory (and all subdirectories) will be'
' ignored.',
},
'die_on_tool_error': {
'flags': ['--die-on-tool-error'],
'help':
'If a tool fails to run, prospector will try to carry on.'
' Use this flag to cause prospector to die and raise the'
' exception the tool generated. Mostly useful for'
' development on prospector.',
},
'path': {
'flags': ['-p', '--path'],
'help':
'The path to a Python project to inspect. Defaults to PWD'
' if not specified. Note: This command line argument is'
' deprecated and will be removed in a future update. Please'
' use the positional PATH argument instead.'
}
}
positional = (('checkpath', {
'help':
'The path to a Python project to inspect. Defaults to PWD'
' if not specified.',
'metavar':
'PATH',
'nargs':
'*',
}), )
return soc.CommandLineSource(
options=options,
version=get_version(),
parser_options=parser_options,
positional=positional,
)
super(ProfileNotFound, self).__init__()
self.name = name
self.profile_path = profile_path
def __repr__(self):
return "Could not find profile %s; searched in %s" % (self.name, ':'.join(self.filepath))
_EMPTY_DATA = {
'inherits': [],
'ignore': [],
'output-format': None
}
for toolname in TOOLS.keys():
_EMPTY_DATA[toolname] = {
'disable': [],
'enable': [],
'run': None,
'options': {}
}
def load_profiles(names, profile_path):
if not isinstance(names, (list, tuple)):
names = (names,)
profiles = [_load_profile(name, profile_path)[0] for name in names]
return merge_profiles(profiles)
def __init__(self, name, filepath):
super(ProfileNotFound, self).__init__()
self.name = name
self.filepath = filepath
def __repr__(self):
return "Could not find profile %s at %s" % (self.name, self.filepath)
_EMPTY_DATA = {
'inherits': [],
'ignore': [],
}
for name in TOOLS.keys():
_EMPTY_DATA[name] = {
'disable': [],
'enabled': None,
'options': {}
}
def load_profiles(names, basedir=None):
if not isinstance(names, (list, tuple)):
names = (names,)
profiles = [_load_profile(name, basedir=basedir)[0] for name in names]
return merge_profiles(profiles)
def _load_content(name, basedir=None):
def build_command_line_source(prog=None, description='Performs static analysis of Python code'):
parser_options = {}
if prog is not None:
parser_options['prog'] = prog
if description is not None:
parser_options['description'] = description
options = {
'zero_exit': {
'flags': ['-0', '--zero-exit'],
'help': 'Prospector will exit with a code of 1 (one) if any messages'
' are found. This makes automation easier; if there are any'
' problems at all, the exit code is non-zero. However this behaviour'
' is not always desirable, so if this flag is set, prospector will'
' exit with a code of 0 if it ran successfully, and non-zero if'
' it failed to run.'
},
'autodetect': {
'flags': ['-A', '--no-autodetect'],
'help': 'Turn off auto-detection of frameworks and libraries used.'
' By default, autodetection will be used. To specify'
' manually, see the --uses option.',
},
'uses': {
'flags': ['-u', '--uses'],
'help': 'A list of one or more libraries or frameworks that the'
' project uses. Possible values are: django, celery, flask. This will be'
' autodetected by default, but if autodetection doesn\'t'
' work, manually specify them using this flag.'
},
'blending': {
'flags': ['-B', '--no-blending'],
'help': 'Turn off blending of messages. Prospector will merge'
' together messages from different tools if they represent'
' the same error. Use this option to see all unmerged'
' messages.',
},
'doc_warnings': {
'flags': ['-D', '--doc-warnings'],
'help': 'Include warnings about documentation.',
},
'test_warnings': {
'flags': ['-T', '--test-warnings'],
'help': 'Also check test modules and packages.',
},
'no_style_warnings': {
'flags': ['-8', '--no-style-warnings'],
'help': 'Don\'t create any warnings about style. This disables the'
' PEP8 tool and similar checks for formatting.',
},
'member_warnings': {
'flags': ['-m', '--member-warnings'],
'help': 'Attempt to warn when code tries to access an attribute of a '
'class or member of a module which does not exist. This is disabled '
'by default as it tends to be quite inaccurate.'
},
'full_pep8': {
'flags': ['-F', '--full-pep8'],
'help': 'Enables every PEP8 warning, so that all PEP8 style'
' violations will be reported.',
},
'max_line_length': {
'flags': ['--max-line-length'],
'help': 'The maximum line length allowed. This will be set by the strictness if no'
' value is explicitly specified'
},
'messages_only': {
'flags': ['-M', '--messages-only'],
'help': 'Only output message information (don\'t output summary'
' information about the checks)',
},
'summary_only': {
'flags': ['-S', '--summary-only'],
'help': 'Only output summary information about the checks (don\'t'
'output message information)',
},
'output_format': {
'flags': ['-o', '--output-format'],
'help': 'The output format. Valid values are: %s' % (
', '.join(sorted(FORMATTERS.keys())),
),
},
'absolute_paths': {
'help': 'Whether to output absolute paths when referencing files '
'in messages. By default, paths will be relative to the '
'project path',
},
'tools': {
'flags': ['-t', '--tool'],
'help': 'A list of tools to run. This lets you set exactly which '
'tools to run. To add extra tools to the defaults, see '
'--with-tool. Possible values are: %s. By '
'default, the following tools will be run: %s' % (
', '.join(sorted(TOOLS.keys())),
', '.join(sorted(DEFAULT_TOOLS)),
),
},
'with_tools': {
'flags': ['-w', '--with-tool'],
'help': 'A list of tools to run in addition to the default tools. '
'To specify all tools explicitly, use the --tool argument. '
'Possible values are %s.' % (
', '.join(sorted(TOOLS.keys()))
),
},
'without_tools': {
'flags': ['-W', '--without-tool'],
'help': 'A list of tools that should not be run. Useful to turn off '
'only a single tool from the defaults. '
'To specify all tools explicitly, use the --tool argument. '
'Possible values are %s.' % (
', '.join(sorted(TOOLS.keys()))
),
},
'profiles': {
'flags': ['-P', '--profile'],
'help': 'The list of profiles to load. A profile is a certain'
' \'type\' of behaviour for prospector, and is represented'
' by a YAML configuration file. Either a full path to the YAML'
' file describing the profile must be provided, or it must be'
' on the profile path (see --profile-path)',
},
'profile_path': {
'flags': ['--profile-path'],
'help': 'Additional paths to search for profile files. By default this'
' is the path that prospector will check, and a directory '
' called ".prospector" in the path that prospector will check.',
},
'show_profile': {
'flags': ['--show-profile'],
'help': 'Include the computed profile in the summary. This will show what'
' prospector has decided the overall profile is once all profiles'
' have been combined and inherited from. This will produce a large'
' output in most cases so is only useful when trying to debug why'
' prospector is not behaving like you expect.',
},
'strictness': {
'flags': ['-s', '--strictness'],
'help': 'How strict the checker should be. This affects how'
' harshly the checker will enforce coding guidelines. The'
' default value is "medium", possible values are'
' "veryhigh", "high", "medium", "low" and "verylow".',
},
'no_external_config': {
'flags': ['-E', '--no-external-config'],
'help': 'Determines how prospector should behave when'
' configuration already exists for a tool. By default,'
' prospector will use existing configuration. This flag'
' will cause prospector to ignore existing configuration'
' and use its own settings for every tool. Note that'
' prospector will always use its own config for tools which'
' do not have custom configuration.',
},
'pylint_config_file': {
'flags': ['--pylint-config-file'],
'help': 'The path to a pylintrc file to use to configure pylint. Prospector will find'
' .pylintrc files in the root of the project, but you can use this option to '
'specify manually where it is.'
},
'ignore_patterns': {
'flags': ['-I', '--ignore-patterns'],
'help': 'A list of paths to ignore, as a list of regular'
' expressions. Files and folders will be ignored if their'
' full path contains any of these patterns.',
},
'ignore_paths': {
'flags': ['-i', '--ignore-paths'],
'help': 'A list of file or directory names to ignore. If the'
' complete name matches any of the items in this list, the'
' file or directory (and all subdirectories) will be'
' ignored.',
},
'die_on_tool_error': {
'flags': ['-X', '--die-on-tool-error'],
'help': 'If a tool fails to run, prospector will try to carry on.'
' Use this flag to cause prospector to die and raise the'
' exception the tool generated. Mostly useful for'
' development on prospector.',
},
'include-tool-stdout': {
'flags': ['--include-tool-stdout'],
'help': 'There are various places where tools will output warnings to '
'stdout/stderr, which breaks parsing of JSON output. Therefore while tols '
'is running, this is suppressed. For developing, it is sometimes useful to '
'see this. This flag will cause stdout/stderr from a tool to be shown as '
'a normal message amongst other warnings. See also --direct-tool-stdout'
},
'direct-tool-stdout': {
'flags': ['--direct-tool-stdout'],
'help': 'Same as --include-tool-stdout, except the output will be printed '
'directly rather than shown as a message.'
},
'loquacious_pylint': {
'flags': ['--loquacious-pylint'],
'help': 'Deprecated - replaced by --include-tool-stdout'
},
'path': {
'flags': ['-p', '--path'],
'help': 'The path to a Python project to inspect. Defaults to PWD'
' if not specified. Note: This command line argument is'
' deprecated and will be removed in a future update. Please'
' use the positional PATH argument instead.'
}
}
positional = (
('checkpath', {
'help': 'The path to a Python project to inspect. Defaults to PWD'
' if not specified. If multiple paths are specified,'
' they must all be files (no directories).',
'metavar': 'PATH',
'nargs': '*',
}),
)
return soc.CommandLineSource(
options=options,
version=__version__,
parser_options=parser_options,
positional=positional,
)
def build_command_line_source():
parser_options = {
'description': 'Performs static analysis of Python code',
}
options = {
'autodetect': {
'flags': ['-A', '--no-autodetect'],
'help': 'Turn off auto-detection of frameworks and libraries used.'
' By default, autodetection will be used. To specify'
' manually, see the --uses option.',
},
'uses': {
'flags': ['-u', '--uses'],
'help': 'A list of one or more libraries or frameworks that the'
' project users. Possible values are: %s. This will be'
' autodetected by default, but if autodetection doesn\'t'
' work, manually specify them using this flag.' % (
', '.join(sorted(LIBRARY_ADAPTORS.keys())),
)
},
'blending': {
'flags': ['-B', '--no-blending'],
'help': 'Turn off blending of messages. Prospector will merge'
' together messages from different tools if they represent'
' the same error. Use this option to see all unmerged'
' messages.',
},
'common_plugin': {
'flags': ['--no-common-plugin'],
},
'doc_warnings': {
'flags': ['-D', '--doc-warnings'],
'help': 'Include warnings about documentation.',
},
'test_warnings': {
'flags': ['-T', '--test-warnings'],
'help': 'Also check test modules and packages.',
},
'style_warnings': {
'flags': ['-8', '--no-style-warnings'],
'help': 'Don\'t create any warnings about style. This disables the'
' PEP8 tool and similar checks for formatting.',
},
'full_pep8': {
'flags': ['-F', '--full-pep8'],
'help': 'Enables every PEP8 warning, so that all PEP8 style'
' violations will be reported.',
},
'max_line_length': {
'flags': ['--max-line-length'],
'help': 'The maximum line length allowed. This will be set by the strictness if no'
' value is explicitly specified'
},
'messages_only': {
'flags': ['-M', '--messages-only'],
'help': 'Only output message information (don\'t output summary'
' information about the checks)',
},
'summary_only': {
'flags': ['-S', '--summary-only'],
'help': 'Only output summary information about the checks (don\'t'
'output message information)',
},
'output_format': {
'flags': ['-o', '--output-format'],
'help': 'The output format. Valid values are: %s' % (
', '.join(sorted(FORMATTERS.keys())),
),
},
'absolute_paths': {
'help': 'Whether to output absolute paths when referencing files'
'in messages. By default, paths will be relative to the'
'project path',
},
'tools': {
'flags': ['-t', '--tool'],
'help': 'A list of tools to run. Possible values are: %s. By'
' default, the following tools will be run: %s' % (
', '.join(sorted(TOOLS.keys())),
', '.join(sorted(DEFAULT_TOOLS)),
),
},
'profiles': {
'flags': ['-P', '--profile'],
'help': 'The list of profiles to load. A profile is a certain'
' \'type\' of behaviour for prospector, and is represented'
' by a YAML configuration file. A full path to the YAML'
' file describing the profile must be provided.',
},
'strictness': {
'flags': ['-s', '--strictness'],
'help': 'How strict the checker should be. This affects how'
' harshly the checker will enforce coding guidelines. The'
' default value is "medium", possible values are'
' "veryhigh", "high", "medium", "low" and "verylow".',
},
'external_config': {
'flags': ['-e', '--external-config'],
'help': 'Determines how prospector should behave when'
' configuration already exists for a tool. By default,'
' prospector will use existing configuration. A value of'
' "merge" will cause prospector to merge existing config'
' and its own config, and "none" means that prospector'
' will use only its own config.',
},
'ignore_patterns': {
'flags': ['-I', '--ignore-patterns'],
'help': 'A list of paths to ignore, as a list of regular'
' expressions. Files and folders will be ignored if their'
' full path contains any of these patterns.',
},
'ignore_paths': {
'flags': ['-i', '--ignore-paths'],
'help': 'A list of file or directory names to ignore. If the'
' complete name matches any of the items in this list, the'
' file or directory (and all subdirectories) will be'
' ignored.',
},
'die_on_tool_error': {
'flags': ['--die-on-tool-error'],
'help': 'If a tool fails to run, prospector will try to carry on.'
' Use this flag to cause prospector to die and raise the'
' exception the tool generated. Mostly useful for'
' development on prospector.',
},
'path': {
'flags': ['-p', '--path'],
'help': 'The path to a Python project to inspect. Defaults to PWD'
' if not specified. Note: This command line argument is'
' deprecated and will be removed in a future update. Please'
' use the positional PATH argument instead.'
}
}
positional = (
('checkpath', {
'help': 'The path to a Python project to inspect. Defaults to PWD'
' if not specified.',
'metavar': 'PATH',
'nargs': '*',
}),
)
return soc.CommandLineSource(
options=options,
version=get_version(),
parser_options=parser_options,
positional=positional,
)
def build_command_line_source(
prog=None, description="Performs static analysis of Python code"):
parser_options = {}
if prog is not None:
parser_options["prog"] = prog
if description is not None:
parser_options["description"] = description
options = {
"zero_exit": {
"flags": ["-0", "--zero-exit"],
"help":
"Prospector will exit with a code of 1 (one) if any messages"
" are found. This makes automation easier; if there are any"
" problems at all, the exit code is non-zero. However this behaviour"
" is not always desirable, so if this flag is set, prospector will"
" exit with a code of 0 if it ran successfully, and non-zero if"
" it failed to run.",
},
"autodetect": {
"flags": ["-A", "--no-autodetect"],
"help":
"Turn off auto-detection of frameworks and libraries used."
" By default, autodetection will be used. To specify"
" manually, see the --uses option.",
},
"uses": {
"flags": ["-u", "--uses"],
"help":
"A list of one or more libraries or frameworks that the"
" project uses. Possible values are: django, celery, flask. This will be"
" autodetected by default, but if autodetection doesn't"
" work, manually specify them using this flag.",
},
"blending": {
"flags": ["-B", "--no-blending"],
"help":
"Turn off blending of messages. Prospector will merge"
" together messages from different tools if they represent"
" the same error. Use this option to see all unmerged"
" messages.",
},
"doc_warnings": {
"flags": ["-D", "--doc-warnings"],
"help": "Include warnings about documentation.",
},
"test_warnings": {
"flags": ["-T", "--test-warnings"],
"help": "Also check test modules and packages.",
},
"no_style_warnings": {
"flags": ["-8", "--no-style-warnings"],
"help":
"Don't create any warnings about style. This disables the"
" PEP8 tool and similar checks for formatting.",
},
"member_warnings": {
"flags": ["-m", "--member-warnings"],
"help":
"Attempt to warn when code tries to access an attribute of a "
"class or member of a module which does not exist. This is disabled "
"by default as it tends to be quite inaccurate.",
},
"full_pep8": {
"flags": ["-F", "--full-pep8"],
"help":
"Enables every PEP8 warning, so that all PEP8 style"
" violations will be reported.",
},
"max_line_length": {
"flags": ["--max-line-length"],
"help":
"The maximum line length allowed. This will be set by the strictness if no"
" value is explicitly specified",
},
"messages_only": {
"flags": ["-M", "--messages-only"],
"help":
"Only output message information (don't output summary"
" information about the checks)",
},
"summary_only": {
"flags": ["-S", "--summary-only"],
"help":
"Only output summary information about the checks (don't"
"output message information)",
},
"output_format": {
"flags": ["-o", "--output-format"],
"help":
"The output format. Valid values are: %s. This will output to stdout by default, however a target file can be used instead by adding :path-to-output-file, eg, -o json:output.json"
% (", ".join(sorted(FORMATTERS.keys())), ),
},
"absolute_paths": {
"help":
"Whether to output absolute paths when referencing files "
"in messages. By default, paths will be relative to the "
"project path",
},
"tools": {
"flags": ["-t", "--tool"],
"help":
"A list of tools to run. This lets you set exactly which "
"tools to run. To add extra tools to the defaults, see "
"--with-tool. Possible values are: %s. By "
"default, the following tools will be run: %s" % (
", ".join(sorted(TOOLS.keys())),
", ".join(sorted(DEFAULT_TOOLS)),
),
},
"with_tools": {
"flags": ["-w", "--with-tool"],
"help":
"A list of tools to run in addition to the default tools. "
"To specify all tools explicitly, use the --tool argument. "
"Possible values are %s." % (", ".join(sorted(TOOLS.keys()))),
},
"without_tools": {
"flags": ["-W", "--without-tool"],
"help":
"A list of tools that should not be run. Useful to turn off "
"only a single tool from the defaults. "
"To specify all tools explicitly, use the --tool argument. "
"Possible values are %s." % (", ".join(sorted(TOOLS.keys()))),
},
"profiles": {
"flags": ["-P", "--profile"],
"help":
"The list of profiles to load. A profile is a certain"
" 'type' of behaviour for prospector, and is represented"
" by a YAML configuration file. Either a full path to the YAML"
" file describing the profile must be provided, or it must be"
" on the profile path (see --profile-path)",
},
"profile_path": {
"flags": ["--profile-path"],
"help":
"Additional paths to search for profile files. By default this"
" is the path that prospector will check, and a directory "
' called ".prospector" in the path that prospector will check.',
},
"show_profile": {
"flags": ["--show-profile"],
"help":
"Include the computed profile in the summary. This will show what"
" prospector has decided the overall profile is once all profiles"
" have been combined and inherited from. This will produce a large"
" output in most cases so is only useful when trying to debug why"
" prospector is not behaving like you expect.",
},
"strictness": {
"flags": ["-s", "--strictness"],
"help":
"How strict the checker should be. This affects how"
" harshly the checker will enforce coding guidelines. The"
' default value is "medium", possible values are'
' "veryhigh", "high", "medium", "low" and "verylow".',
},
"no_external_config": {
"flags": ["-E", "--no-external-config"],
"help":
"Determines how prospector should behave when"
" configuration already exists for a tool. By default,"
" prospector will use existing configuration. This flag"
" will cause prospector to ignore existing configuration"
" and use its own settings for every tool. Note that"
" prospector will always use its own config for tools which"
" do not have custom configuration.",
},
"pylint_config_file": {
"flags": ["--pylint-config-file"],
"help":
"The path to a pylintrc file to use to configure pylint. Prospector will find"
" .pylintrc files in the root of the project, but you can use this option to "
"specify manually where it is.",
},
"ignore_patterns": {
"flags": ["-I", "--ignore-patterns"],
"help":
"A list of paths to ignore, as a list of regular"
" expressions. Files and folders will be ignored if their"
" full path contains any of these patterns.",
},
"ignore_paths": {
"flags": ["-i", "--ignore-paths"],
"help":
"A list of file or directory names to ignore. If the"
" complete name matches any of the items in this list, the"
" file or directory (and all subdirectories) will be"
" ignored.",
},
"die_on_tool_error": {
"flags": ["-X", "--die-on-tool-error"],
"help":
"If a tool fails to run, prospector will try to carry on."
" Use this flag to cause prospector to die and raise the"
" exception the tool generated. Mostly useful for"
" development on prospector.",
},
"include-tool-stdout": {
"flags": ["--include-tool-stdout"],
"help":
"There are various places where tools will output warnings to "
"stdout/stderr, which breaks parsing of JSON output. Therefore while tols "
"is running, this is suppressed. For developing, it is sometimes useful to "
"see this. This flag will cause stdout/stderr from a tool to be shown as "
"a normal message amongst other warnings. See also --direct-tool-stdout",
},
"direct-tool-stdout": {
"flags": ["--direct-tool-stdout"],
"help":
"Same as --include-tool-stdout, except the output will be printed "
"directly rather than shown as a message.",
},
"path": {
"flags": ["-p", "--path"],
"help":
"The path to a Python project to inspect. Defaults to PWD"
" if not specified. Note: This command line argument is"
" deprecated and will be removed in a future update. Please"
" use the positional PATH argument instead.",
},
}
positional = ((
"checkpath",
{
"help":
"The path to a Python project to inspect. Defaults to PWD"
" if not specified. If multiple paths are specified,"
" they must all be files (no directories).",
"metavar":
"PATH",
"nargs":
"*",
},
), )
return soc.CommandLineSource(
options=options,
version=__version__,
parser_options=parser_options,
positional=positional,
)
def __init__(self, name, filepath):
super(ProfileNotFound, self).__init__()
self.name = name
self.filepath = filepath
def __repr__(self):
return "Could not find profile %s at %s" % (self.name, self.filepath)
_EMPTY_DATA = {
'inherits': [],
'ignore': [],
}
for toolname in TOOLS.keys():
_EMPTY_DATA[toolname] = {
'disable': [],
'enable': [],
'run': None,
'options': {}
}
def load_profiles(names, basedir=None):
if not isinstance(names, (list, tuple)):
names = (names,)
profiles = [_load_profile(name, basedir=basedir)[0] for name in names]
return merge_profiles(profiles)
def build_command_line_source(prog=None, description='Performs static analysis of Python code'):
parser_options = {}
if prog is not None:
parser_options['prog'] = prog
if description is not None:
parser_options['description'] = description
options = {
'zero_exit': {
'flags': ['-0', '--zero-exit'],
'help': 'Prospector will exit with a code of 1 (one) if any messages'
' are found. This makes automation easier; if there are any'
' problems at all, the exit code is non-zero. However this behaviour'
' is not always desirable, so if this flag is set, prospector will'
' exit with a code of 0 if it ran successfully, and non-zero if'
' it failed to run.'
},
'autodetect': {
'flags': ['-A', '--no-autodetect'],
'help': 'Turn off auto-detection of frameworks and libraries used.'
' By default, autodetection will be used. To specify'
' manually, see the --uses option.',
},
'uses': {
'flags': ['-u', '--uses'],
'help': 'A list of one or more libraries or frameworks that the'
' project uses. Possible values are: django, celery, flask. This will be'
' autodetected by default, but if autodetection doesn\'t'
' work, manually specify them using this flag.'
},
'blending': {
'flags': ['-B', '--no-blending'],
'help': 'Turn off blending of messages. Prospector will merge'
' together messages from different tools if they represent'
' the same error. Use this option to see all unmerged'
' messages.',
},
'common_plugin': {
'flags': ['--no-common-plugin'],
},
'doc_warnings': {
'flags': ['-D', '--doc-warnings'],
'help': 'Include warnings about documentation.',
},
'test_warnings': {
'flags': ['-T', '--test-warnings'],
'help': 'Also check test modules and packages.',
},
'no_style_warnings': {
'flags': ['-8', '--no-style-warnings'],
'help': 'Don\'t create any warnings about style. This disables the'
' PEP8 tool and similar checks for formatting.',
},
'member_warnings': {
'flags': ['-m', '--member-warnings'],
'help': 'Attempt to warn when code tries to access an attribute of a '
'class or member of a module which does not exist. This is disabled '
'by default as it tends to be quite inaccurate.'
},
'full_pep8': {
'flags': ['-F', '--full-pep8'],
'help': 'Enables every PEP8 warning, so that all PEP8 style'
' violations will be reported.',
},
'max_line_length': {
'flags': ['--max-line-length'],
'help': 'The maximum line length allowed. This will be set by the strictness if no'
' value is explicitly specified'
},
'messages_only': {
'flags': ['-M', '--messages-only'],
'help': 'Only output message information (don\'t output summary'
' information about the checks)',
},
'summary_only': {
'flags': ['-S', '--summary-only'],
'help': 'Only output summary information about the checks (don\'t'
'output message information)',
},
'output_format': {
'flags': ['-o', '--output-format'],
'help': 'The output format. Valid values are: %s' % (
', '.join(sorted(FORMATTERS.keys())),
),
},
'absolute_paths': {
'help': 'Whether to output absolute paths when referencing files '
'in messages. By default, paths will be relative to the '
'project path',
},
'tools': {
'flags': ['-t', '--tool'],
'help': 'A list of tools to run. This lets you set exactly which '
'tools to run. To add extra tools to the defaults, see '
'--with-tool. Possible values are: %s. By '
'default, the following tools will be run: %s' % (
', '.join(sorted(TOOLS.keys())),
', '.join(sorted(DEFAULT_TOOLS)),
),
},
'with_tools': {
'flags': ['-w', '--with-tool'],
'help': 'A list of tools to run in addition to the default tools. '
'To specify all tools explicitly, use the --tool argument. '
'Possible values are %s.' % (
', '.join(sorted(TOOLS.keys()))
),
},
'without_tools': {
'flags': ['-W', '--without-tool'],
'help': 'A list of tools that should not be run. Useful to turn off '
'only a single tool from the defaults. '
'To specify all tools explicitly, use the --tool argument. '
'Possible values are %s.' % (
', '.join(sorted(TOOLS.keys()))
),
},
'profiles': {
'flags': ['-P', '--profile'],
'help': 'The list of profiles to load. A profile is a certain'
' \'type\' of behaviour for prospector, and is represented'
' by a YAML configuration file. Either a full path to the YAML'
' file describing the profile must be provided, or it must be'
' on the profile path (see --profile-path)',
},
'profile_path': {
'flags': ['--profile-path'],
'help': 'Additional paths to search for profile files. By default this'
' is the path that prospector will check, and a directory '
' called ".prospector" in the path that prospector will check.',
},
'show_profile': {
'flags': ['--show-profile'],
'help': 'Include the computed profile in the summary. This will show what'
' prospector has decided the overall profile is once all profiles'
' have been combined and inherited from. This will produce a large'
' output in most cases so is only useful when trying to debug why'
' prospector is not behaving like you expect.',
},
'strictness': {
'flags': ['-s', '--strictness'],
'help': 'How strict the checker should be. This affects how'
' harshly the checker will enforce coding guidelines. The'
' default value is "medium", possible values are'
' "veryhigh", "high", "medium", "low" and "verylow".',
},
'no_external_config': {
'flags': ['-E', '--no-external-config'],
'help': 'Determines how prospector should behave when'
' configuration already exists for a tool. By default,'
' prospector will use existing configuration. This flag'
' will cause prospector to ignore existing configuration'
' and use its own settings for every tool. Note that'
' prospector will always use its own config for tools which'
' do not have custom configuration.',
},
'pylint_config_file': {
'flags': ['--pylint-config-file'],
'help': 'The path to a pylintrc file to use to configure pylint. Prospector will find'
' .pylintrc files in the root of the project, but you can use this option to '
'specify manually where it is.'
},
'ignore_patterns': {
'flags': ['-I', '--ignore-patterns'],
'help': 'A list of paths to ignore, as a list of regular'
' expressions. Files and folders will be ignored if their'
' full path contains any of these patterns.',
},
'ignore_paths': {
'flags': ['-i', '--ignore-paths'],
'help': 'A list of file or directory names to ignore. If the'
' complete name matches any of the items in this list, the'
' file or directory (and all subdirectories) will be'
' ignored.',
},
'die_on_tool_error': {
'flags': ['-X', '--die-on-tool-error'],
'help': 'If a tool fails to run, prospector will try to carry on.'
' Use this flag to cause prospector to die and raise the'
' exception the tool generated. Mostly useful for'
' development on prospector.',
},
'include-tool-stdout': {
'flags': ['--include-tool-stdout'],
'help': 'There are various places where tools will output warnings to '
'stdout/stderr, which breaks parsing of JSON output. Therefore while tols '
'is running, this is suppressed. For developing, it is sometimes useful to '
'see this. This flag will cause stdout/stderr from a tool to be shown as '
'a normal message amongst other warnings. See also --direct-tool-stdout'
},
'direct-tool-stdout': {
'flags': ['--direct-tool-stdout'],
'help': 'Same as --include-tool-stdout, except the output will be printed '
'directly rather than shown as a message.'
},
'loquacious_pylint': {
'flags': ['--loquacious-pylint'],
'help': 'Deprecated - replaced by --include-tool-stdout'
},
'path': {
'flags': ['-p', '--path'],
'help': 'The path to a Python project to inspect. Defaults to PWD'
' if not specified. Note: This command line argument is'
' deprecated and will be removed in a future update. Please'
' use the positional PATH argument instead.'
}
}
positional = (
('checkpath', {
'help': 'The path to a Python project to inspect. Defaults to PWD'
' if not specified. If multiple paths are specified,'
' they must all be files (no directories).',
'metavar': 'PATH',
'nargs': '*',
}),
)
return soc.CommandLineSource(
options=options,
version=__version__,
parser_options=parser_options,
positional=positional,
)
