def read_packet(self, Protocol, timeout = 10):
packet = ''
# self._bufer = ''
stop_time = time.time() + timeout
while time.time() < stop_time:
data = self.get_row_data()
if data is None:
# problem with fake packet end:
# 19 26 00 03 01 0A 11 A4 00 99 00 00 00 04 09 AA 07 02 80 4D 02 03 A1 0A D8 0A
time.sleep(0.09)
continue
#Reading 1st byte
packet = packet + data
# if (len(packet) >= Protocol.MIN_PACKET_LEN) and (packet.rfind(Protocol.EOM) == len(packet) - len(Protocol.EOM)):
#Found EOM = 0x0A and packets length is more than packet_type.MIN_PACKET_LEN
#Checking if packet is correct
for char_index in range(len(packet) - Protocol.MIN_PACKET_LEN):
offset = self._check_packet(packet[char_index:], Protocol.NAME)
if type(offset) is not bool:
self._bufer = packet[offset:]
packet = packet[char_index:char_index + offset]
# log.write('bufer=%s' % hexdump(self._bufer))
log.write('={0}= [RX]: {1}'.format(self.COMPort, hexdump(packet)), "debug")
return packet
#Packet is incorrect. No byte found that corresponds to packet length
#Continue collecting data
#print '(def read_packet) Output due to a timeout {0} sec.'.format( timeout )
return None
def read_packet(self, Protocol, timeout=10):
packet = ''
# self._bufer = ''
stop_time = time.time() + timeout
while time.time() < stop_time:
data = self.get_row_data()
if data is None:
# problem with fake packet end:
# 19 26 00 03 01 0A 11 A4 00 99 00 00 00 04 09 AA 07 02 80 4D 02 03 A1 0A D8 0A
time.sleep(0.09)
continue
#Reading 1st byte
packet = packet + data
# if (len(packet) >= Protocol.MIN_PACKET_LEN) and (packet.rfind(Protocol.EOM) == len(packet) - len(Protocol.EOM)):
#Found EOM = 0x0A and packets length is more than packet_type.MIN_PACKET_LEN
#Checking if packet is correct
for char_index in range(len(packet) - Protocol.MIN_PACKET_LEN):
offset = self._check_packet(packet[char_index:], Protocol.NAME)
if type(offset) is not bool:
self._bufer = packet[offset:]
packet = packet[char_index:char_index + offset]
# log.write('bufer=%s' % hexdump(self._bufer))
log.write(
'={0}= [RX]: {1}'.format(self.COMPort,
hexdump(packet)), "debug")
return packet
#Packet is incorrect. No byte found that corresponds to packet length
#Continue collecting data
#print '(def read_packet) Output due to a timeout {0} sec.'.format( timeout )
return None
def send_packet(self, packet):
self.ser.read(self.ser.inWaiting())
log.write('={0}= [TX]: {1}'.format(self.COMPort, hexdump(packet)), "debug")
self.ser.write(packet)
def run(self):
packet_found = False
packet = ''
offset = 0
while(not self._stop_listening):
if(self._port.inWaiting() > 0):
self._is_runned = True
data_size = self._port.inWaiting()
add = self._port.read(data_size)
self._bufer += add
# self.log("raw {0}[RX] {1}".format(self._port.port, hexdump(add)), "debug")
if self._repeater_port:
self._repeater_port.write(add)
else:
if self._repeater_port and (self._repeater_port.inWaiting() > 0):
data = self._repeater_port.read(self._repeater_port.inWaiting())
self._port.write(data)
if len(self._pool_out) > 0:
msg = self._pool_out.pop(0)
self.log("{0}[TX] {1}".format(self._port.port, hexdump(msg)), "debug")
self._port.write(msg)
else:
time.sleep(0.01)
continue
offset = 0
# self.log('bufer = %s for %s' % (hexdump(self._bufer), self._port.port))
while offset < len(self._bufer):
# seek to STM
# STM = 0 means any byte
# print "fist byte=%02x" % ord(self._bufer[offset])
while (self._STM != 0) and (self._bufer[offset] != self._STM):
offset += 1
# print "seeking for STM: %d" % offset
if offset == len(self._bufer):
break
else:
#STM found
if(self._bufer.find(self._EOM) != -1):
# print "EOM found "
#print "buf[%d]: %s" % (len(self._bufer),hexdump(self._bufer))
for handler in self._handlers:
#self.log("protoparser::handler_run %s (%s)" % (handler, self._port.port))
#print "handlers:%d for %s" % (len(self._handlers), self)
packet = handler(self._bufer[offset:])
if (packet != None):
self._pool.append(packet)
self.log("{0}[RX] {1}".format(self._port.port, hexdump(packet)), "debug")
#crop bufer
self._bufer = self._bufer[len(packet) + offset:]
# self.log("croped bufer = %s" % hexdump(self._bufer), "debug")
# offset = 0
break
else:
offset += 1
else:
break
if self._bufer and self._show_unparsed: pass
# self.log("UNP[%d](%s): %s" % (threading.current_thread().ident,self._port.port, hexdump(self._bufer)))
#self._bufer = ''
self._is_runned = False
def run(self):
packet_found = False
packet = ''
offset = 0
while (not self._stop_listening):
if self._pause:
time.sleep(0.2)
continue
if (self._port.inWaiting() > 0):
self._is_runned = True
data_size = self._port.inWaiting()
add = self._port.read(data_size)
self._bufer += add
# self.log("raw {0}[RX] {1}".format(self._port.port, hexdump(add)), "debug")
if self._repeater_port:
self._repeater_port.write(add)
else:
if self._repeater_port and (self._repeater_port.inWaiting() >
0):
data = self._repeater_port.read(
self._repeater_port.inWaiting())
self._port.write(data)
if len(self._pool_out) > 0:
msg = self._pool_out.pop(0)
self.log(
"{0}[TX] {1}".format(self._port.port, hexdump(msg)),
"debug")
self._port.write(msg)
else:
time.sleep(0.01)
continue
offset = 0
# self.log('bufer = %s for %s' % (hexdump(self._bufer), self._port.port))
while offset < len(self._bufer):
# seek to STM
# STM = 0 means any byte
# print "fist byte=%02x" % ord(self._bufer[offset])
while (self._STM != 0) and (self._bufer[offset] != self._STM):
offset += 1
# print "seeking for STM: %d" % offset
if offset == len(self._bufer):
break
else:
#STM found
if (self._bufer.find(self._EOM) != -1):
# print "EOM found "
#print "buf[%d]: %s" % (len(self._bufer),hexdump(self._bufer))
for handler in self._handlers:
#self.log("protoparser::handler_run %s (%s)" % (handler, self._port.port))
#print "handlers:%d for %s" % (len(self._handlers), self)
packet = handler(self._bufer[offset:])
if (packet != None):
self._pool.append(packet)
self.log(
"{0}[RX] {1}".format(
self._port.port, hexdump(packet)),
"debug")
#crop bufer
self._bufer = self._bufer[len(packet) +
offset:]
# self.log("croped bufer = %s" % hexdump(self._bufer), "debug")
# offset = 0
break
else:
offset += 1
else:
break
if self._bufer and self._show_unparsed: pass
# self.log("UNP[%d](%s): %s" % (threading.current_thread().ident,self._port.port, hexdump(self._bufer)))
#self._bufer = ''
self._is_runned = False
def send_packet(self, packet):
self.ser.read(self.ser.inWaiting())
log.write('={0}= [TX]: {1}'.format(self.COMPort, hexdump(packet)),
"debug")
self.ser.write(packet)