Exemple #1
0
 def execute(self):
     print(_("Generating updated storage configuration"))
     try:
         doKickstartStorage(self.storage, self.data, self.instclass)
     except (StorageError, KickstartParseError) as e:
         log.error("storage configuration failed: %s", e)
         print(_("storage configuration failed: %s") % e)
         self.errors = [str(e)]
         self.data.bootloader.bootDrive = ""
         self.data.clearpart.type = CLEARPART_TYPE_ALL
         self.data.clearpart.initAll = False
         self.storage.config.update(self.data)
         self.storage.autopart_type = self.data.autopart.type
         self.storage.reset()
         # now set ksdata back to the user's specified config
         applyDiskSelection(self.storage, self.data, self.selected_disks)
     except BootLoaderError as e:
         log.error("BootLoader setup failed: %s", e)
         print(_("storage configuration failed: %s") % e)
         self.errors = [str(e)]
         self.data.bootloader.bootDrive = ""
     else:
         print(_("Checking storage configuration..."))
         report = storage_checker.check(self.storage)
         print("\n".join(report.all_errors))
         report.log(log)
         self.errors = report.errors
         self.warnings = report.warnings
     finally:
         resetCustomStorageData(self.data)
         self._ready = True
Exemple #2
0
 def _doExecute(self):
     self._ready = False
     hubQ.send_not_ready(self.__class__.__name__)
     # on the off-chance dasdfmt is running, we can't proceed further
     threadMgr.wait(constants.THREAD_DASDFMT)
     hubQ.send_message(self.__class__.__name__,
                       _("Saving storage configuration..."))
     try:
         doKickstartStorage(self.storage, self.data, self.instclass)
     except (StorageError, KickstartValueError) as e:
         log.error("storage configuration failed: %s", e)
         StorageChecker.errors = str(e).split("\n")
         hubQ.send_message(self.__class__.__name__,
                           _("Failed to save storage configuration..."))
         self.data.bootloader.bootDrive = ""
         self.data.ignoredisk.drives = []
         self.data.ignoredisk.onlyuse = []
         self.storage.config.update(self.data)
         self.storage.reset()
         self.disks = getDisks(self.storage.devicetree)
         # now set ksdata back to the user's specified config
         applyDiskSelection(self.storage, self.data, self.selected_disks)
     except BootLoaderError as e:
         log.error("BootLoader setup failed: %s", e)
         StorageChecker.errors = str(e).split("\n")
         hubQ.send_message(self.__class__.__name__,
                           _("Failed to save storage configuration..."))
         self.data.bootloader.bootDrive = ""
     else:
         if self.autopart:
             self.run()
     finally:
         resetCustomStorageData(self.data)
         self._ready = True
         hubQ.send_ready(self.__class__.__name__, True)
Exemple #3
0
    def apply(self):
        applyDiskSelection(self.storage, self.data, self.selected_disks)
        self.data.autopart.autopart = self.autopart
        self.data.autopart.type = self.autoPartType
        self.data.autopart.encrypted = self.encrypted
        self.data.autopart.passphrase = self.passphrase

        self.clearPartType = CLEARPART_TYPE_NONE

        if self.data.bootloader.bootDrive and \
           self.data.bootloader.bootDrive not in self.selected_disks:
            self.data.bootloader.bootDrive = ""
            self.storage.bootloader.reset()

        self.data.clearpart.initAll = True
        self.data.clearpart.type = self.clearPartType
        self.storage.config.update(self.data)
        self.storage.autoPartType = self.data.autopart.type
        self.storage.encryptedAutoPart = self.data.autopart.encrypted
        self.storage.encryptionPassphrase = self.data.autopart.passphrase

        # If autopart is selected we want to remove whatever has been
        # created/scheduled to make room for autopart.
        # If custom is selected, we want to leave alone any storage layout the
        # user may have set up before now.
        self.storage.config.clearNonExistent = self.data.autopart.autopart

        # refresh the autopart swap size suggestion with currently selected disks
        for request in self.storage.autoPartitionRequests:
            if request.fstype == "swap":
                disk_space = getAvailableDiskSpace(self.storage)
                request.size = swap_lib.swapSuggestion(disk_space=disk_space)
                break
Exemple #4
0
 def execute(self):
     print(_("Generating updated storage configuration"))
     try:
         doKickstartStorage(self.storage, self.data, self.instclass)
     except (StorageError, KickstartParseError) as e:
         log.error("storage configuration failed: %s", e)
         print(_("storage configuration failed: %s") % e)
         self.errors = [str(e)]
         self.data.bootloader.bootDrive = ""
         self.data.clearpart.type = CLEARPART_TYPE_ALL
         self.data.clearpart.initAll = False
         self.storage.config.update(self.data)
         self.storage.autopart_type = self.data.autopart.type
         self.storage.reset()
         # now set ksdata back to the user's specified config
         applyDiskSelection(self.storage, self.data, self.selected_disks)
     except BootLoaderError as e:
         log.error("BootLoader setup failed: %s", e)
         print(_("storage configuration failed: %s") % e)
         self.errors = [str(e)]
         self.data.bootloader.bootDrive = ""
     else:
         print(_("Checking storage configuration..."))
         report = storage_checker.check(self.storage)
         print("\n".join(report.all_errors))
         report.log(log)
         self.errors = report.errors
         self.warnings = report.warnings
     finally:
         resetCustomStorageData(self.data)
         self._ready = True
Exemple #5
0
    def apply(self):
        applyDiskSelection(self.storage, self.data, self.selected_disks)
        self.data.autopart.autopart = self.autopart
        self.data.autopart.type = self.autoPartType
        self.data.autopart.encrypted = self.encrypted
        self.data.autopart.passphrase = self.passphrase

        if self.data.bootloader.bootDrive and \
           self.data.bootloader.bootDrive not in self.selected_disks:
            self.data.bootloader.bootDrive = ""
            self.storage.bootloader.reset()

        self.data.clearpart.initAll = True

        if not self.autopart_missing_passphrase:
            self.clearPartType = CLEARPART_TYPE_NONE
            self.data.clearpart.type = self.clearPartType

        self.storage.config.update(self.data)
        self.storage.autoPartType = self.data.autopart.type
        self.storage.encryptedAutoPart = self.data.autopart.encrypted
        self.storage.encryptionPassphrase = self.data.autopart.passphrase

        # If autopart is selected we want to remove whatever has been
        # created/scheduled to make room for autopart.
        # If custom is selected, we want to leave alone any storage layout the
        # user may have set up before now.
        self.storage.config.clearNonExistent = self.data.autopart.autopart
Exemple #6
0
    def apply(self):
        applyDiskSelection(self.storage, self.data, self.selected_disks)
        self.data.autopart.autopart = self.autopart
        self.data.autopart.type = self.autoPartType
        self.data.autopart.encrypted = self.encrypted
        self.data.autopart.passphrase = self.passphrase

        if self.data.bootloader.bootDrive and \
           self.data.bootloader.bootDrive not in self.selected_disks:
            self.data.bootloader.bootDrive = ""
            self.storage.bootloader.reset()

        self.data.clearpart.initAll = True

        if not self.autopart_missing_passphrase:
            self.clearPartType = CLEARPART_TYPE_NONE
            self.data.clearpart.type = self.clearPartType

        self.storage.config.update(self.data)
        self.storage.autoPartType = self.data.autopart.type
        self.storage.encryptedAutoPart = self.data.autopart.encrypted
        self.storage.encryptionPassphrase = self.data.autopart.passphrase

        # If autopart is selected we want to remove whatever has been
        # created/scheduled to make room for autopart.
        # If custom is selected, we want to leave alone any storage layout the
        # user may have set up before now.
        self.storage.config.clearNonExistent = self.data.autopart.autopart
Exemple #7
0
    def apply(self):
        applyDiskSelection(self.storage, self.data, self.selected_disks)
        self.data.autopart.autopart = self.autopart
        self.data.autopart.type = self.autoPartType
        self.data.autopart.encrypted = self.encrypted
        self.data.autopart.passphrase = self.passphrase

        self.clearPartType = CLEARPART_TYPE_NONE

        if self.data.bootloader.bootDrive and \
           self.data.bootloader.bootDrive not in self.selected_disks:
            self.data.bootloader.bootDrive = ""
            self.storage.bootloader.reset()

        self.data.clearpart.initAll = True
        self.data.clearpart.type = self.clearPartType
        self.storage.config.update(self.data)
        self.storage.autoPartType = self.data.autopart.type
        self.storage.encryptedAutoPart = self.data.autopart.encrypted
        self.storage.encryptionPassphrase = self.data.autopart.passphrase

        # If autopart is selected we want to remove whatever has been
        # created/scheduled to make room for autopart.
        # If custom is selected, we want to leave alone any storage layout the
        # user may have set up before now.
        self.storage.config.clearNonExistent = self.data.autopart.autopart

        # refresh the autopart swap size suggestion with currently selected disks
        for request in self.storage.autoPartitionRequests:
            if request.fstype == "swap":
                disk_space = getAvailableDiskSpace(self.storage)
                request.size = swap_lib.swapSuggestion(disk_space=disk_space)
                break
Exemple #8
0
    def execute(self):
        print(_("Generating updated storage configuration"))
        try:
            doKickstartStorage(self.storage, self.data, self.instclass)
        except (StorageError, KickstartParseError) as e:
            log.error("storage configuration failed: %s", e)
            print(_("storage configuration failed: %s") % e)
            self.errors = [str(e)]

            # Prepare for reset.
            self._bootloader_observer.proxy.SetDrive(BOOTLOADER_DRIVE_UNSET)
            self._disk_init_observer.proxy.SetInitializationMode(CLEAR_PARTITIONS_ALL)
            self._disk_init_observer.proxy.SetInitializeLabelsEnabled(False)
            self.storage.autopart_type = self.data.autopart.type

            # The reset also calls self.storage.config.update().
            self.storage.reset()

            # Now set data back to the user's specified config.
            applyDiskSelection(self.storage, self.data, self.selected_disks)
        except BootLoaderError as e:
            log.error("BootLoader setup failed: %s", e)
            print(_("storage configuration failed: %s") % e)
            self.errors = [str(e)]
            self._bootloader_observer.proxy.SetDrive(BOOTLOADER_DRIVE_UNSET)
        else:
            print(_("Checking storage configuration..."))
            report = storage_checker.check(self.storage)
            print("\n".join(report.all_errors))
            report.log(log)
            self.errors = report.errors
            self.warnings = report.warnings
        finally:
            resetCustomStorageData(self.data)
            self._ready = True
Exemple #9
0
 def _doExecute(self):
     self._ready = False
     hubQ.send_not_ready(self.__class__.__name__)
     # on the off-chance dasdfmt is running, we can't proceed further
     threadMgr.wait(constants.THREAD_DASDFMT)
     hubQ.send_message(self.__class__.__name__, _("Saving storage configuration..."))
     try:
         doKickstartStorage(self.storage, self.data, self.instclass)
     except (StorageError, KickstartValueError) as e:
         log.error("storage configuration failed: %s", e)
         StorageChecker.errors = str(e).split("\n")
         hubQ.send_message(self.__class__.__name__, _("Failed to save storage configuration..."))
         self.data.bootloader.bootDrive = ""
         self.data.ignoredisk.drives = []
         self.data.ignoredisk.onlyuse = []
         self.storage.config.update(self.data)
         self.storage.reset()
         self.disks = getDisks(self.storage.devicetree)
         # now set ksdata back to the user's specified config
         applyDiskSelection(self.storage, self.data, self.selected_disks)
     except BootLoaderError as e:
         log.error("BootLoader setup failed: %s", e)
         StorageChecker.errors = str(e).split("\n")
         hubQ.send_message(self.__class__.__name__, _("Failed to save storage configuration..."))
         self.data.bootloader.bootDrive = ""
     else:
         if self.autopart:
             self.run()
     finally:
         resetCustomStorageData(self.data)
         self._ready = True
         hubQ.send_ready(self.__class__.__name__, True)
Exemple #10
0
    def apply(self):
        applyDiskSelection(self.storage, self.data, self.selected_disks)

        # some disks may have been added in this spoke, we need to recreate the
        # snapshot of on-disk storage
        if on_disk_storage.created:
            on_disk_storage.dispose_snapshot()
        on_disk_storage.create_snapshot(self.storage)
Exemple #11
0
    def apply(self):
        applyDiskSelection(self.storage, self.data, self.selected_disks)

        # some disks may have been added in this spoke, we need to recreate the
        # snapshot of on-disk storage
        if on_disk_storage.created:
            on_disk_storage.dispose_snapshot()
        on_disk_storage.create_snapshot(self.storage)
Exemple #12
0
    def input(self, args, key):
        """Grab the disk choice and update things"""
        self.errors = []
        if self._container.process_user_input(key):
            self.redraw()
            return InputState.PROCESSED
        else:
            # TRANSLATORS: 'c' to continue
            if key.lower() == C_('TUI|Spoke Navigation', 'c'):
                if self.selected_disks:
                    # Is DASD formatting supported?
                    if DasdFormatting.is_supported():
                        # Wait for storage.
                        threadMgr.wait(THREAD_STORAGE)

                        # Get selected disks.
                        disks = getDisksByNames(self.disks,
                                                self.selected_disks)

                        # Check if some of the disks should be formatted.
                        dasd_formatting = DasdFormatting()
                        dasd_formatting.search_disks(disks)

                        if dasd_formatting.should_run():
                            # We want to apply current selection before running dasdfmt to
                            # prevent this information from being lost afterward
                            applyDiskSelection(self.storage, self.data,
                                               self.selected_disks)

                            # Run the dialog.
                            self.run_dasdfmt_dialog(dasd_formatting)
                            self.redraw()
                            return InputState.PROCESSED

                    # make sure no containers were split up by the user's disk
                    # selection
                    self.errors.extend(
                        checkDiskSelection(self.storage, self.selected_disks))
                    if self.errors:
                        # The disk selection has to make sense before we can
                        # proceed.
                        self.redraw()
                        return InputState.PROCESSED

                    self.apply()
                    new_spoke = PartTypeSpoke(self.data, self.storage,
                                              self.payload, self.instclass)
                    ScreenHandler.push_screen_modal(new_spoke)
                    self.apply()
                    self.execute()
                    self.close()

                return InputState.PROCESSED
            else:
                return super().input(args, key)
Exemple #13
0
    def on_specialized_clicked(self, button):
        # Don't want to run apply or execute in this case, since we have to
        # collect some more disks first.  The user will be back to this spoke.
        self.applyOnSkip = False

        # However, we do want to apply current selections so the disk cart off
        # the filter spoke will display the correct information.
        applyDiskSelection(self.storage, self.data, self.selected_disks)

        self.skipTo = "FilterSpoke"
        NormalSpoke.on_back_clicked(self, button)
Exemple #14
0
    def on_specialized_clicked(self, button):
        # Don't want to run apply or execute in this case, since we have to
        # collect some more disks first.  The user will be back to this spoke.
        self.applyOnSkip = False

        # However, we do want to apply current selections so the disk cart off
        # the filter spoke will display the correct information.
        applyDiskSelection(self.storage, self.data, self.selected_disks)

        self.skipTo = "FilterSpoke"
        NormalSpoke.on_back_clicked(self, button)
Exemple #15
0
    def _check_dasd_formats(self):
        rc = DASD_FORMAT_NO_CHANGE
        dasds = self.storage.devicetree.make_unformatted_dasd_list(self.storage.devicetree.dasd)
        if len(dasds) > 0:
            # We want to apply current selection before running dasdfmt to
            # prevent this information from being lost afterward
            applyDiskSelection(self.storage, self.data, self.selected_disks)
            dialog = DasdFormatDialog(self.data, self.storage, dasds)
            ignoreEscape(dialog.window)
            rc = self.run_lightbox_dialog(dialog)

        return rc
Exemple #16
0
    def _check_dasd_formats(self):
        rc = DASD_FORMAT_NO_CHANGE
        dasds = (d for d in self.storage.devicetree.devices
                 if d.type == "dasd" and blockdev.s390.dasd_needs_format(d.busid))
        if len(dasds) > 0:
            # We want to apply current selection before running dasdfmt to
            # prevent this information from being lost afterward
            applyDiskSelection(self.storage, self.data, self.selected_disks)
            dialog = DasdFormatDialog(self.data, self.storage, dasds)
            ignoreEscape(dialog.window)
            rc = self.run_lightbox_dialog(dialog)

        return rc
Exemple #17
0
    def _check_dasd_formats(self):
        rc = DASD_FORMAT_NO_CHANGE
        dasds = self.storage.devicetree.make_unformatted_dasd_list(
            self.storage.devicetree.dasd)
        if len(dasds) > 0:
            # We want to apply current selection before running dasdfmt to
            # prevent this information from being lost afterward
            applyDiskSelection(self.storage, self.data, self.selected_disks)
            dialog = DasdFormatDialog(self.data, self.storage, dasds)
            ignoreEscape(dialog.window)
            rc = self.run_lightbox_dialog(dialog)

        return rc
Exemple #18
0
    def _initialize(self):
        hubQ.send_message(self.__class__.__name__, _("Probing storage..."))

        threadMgr.wait(constants.THREAD_STORAGE)
        threadMgr.wait(constants.THREAD_CUSTOM_STORAGE_INIT)

        self.disks = getDisks(self.storage.devicetree)

        # if there's only one disk, select it by default
        if len(self.disks) == 1 and not self.selected_disks:
            applyDiskSelection(self.storage, self.data, [self.disks[0].name])

        self._ready = True
        hubQ.send_ready(self.__class__.__name__, False)
Exemple #19
0
    def _initialize(self):
        hubQ.send_message(self.__class__.__name__, _(constants.PAYLOAD_STATUS_PROBING_STORAGE))

        threadMgr.wait(constants.THREAD_STORAGE)
        threadMgr.wait(constants.THREAD_CUSTOM_STORAGE_INIT)

        self.disks = getDisks(self.storage.devicetree)

        # if there's only one disk, select it by default
        if len(self.disks) == 1 and not self.selected_disks:
            applyDiskSelection(self.storage, self.data, [self.disks[0].name])

        self._ready = True
        hubQ.send_ready(self.__class__.__name__, False)
Exemple #20
0
    def _check_dasd_formats(self):
        rc = DASD_FORMAT_NO_CHANGE
        dasds = (
            d for d in self.storage.devicetree.devices
            if d.type == "dasd" and blockdev.s390.dasd_needs_format(d.busid))
        if len(dasds) > 0:
            # We want to apply current selection before running dasdfmt to
            # prevent this information from being lost afterward
            applyDiskSelection(self.storage, self.data, self.selected_disks)
            dialog = DasdFormatDialog(self.data, self.storage, dasds)
            ignoreEscape(dialog.window)
            rc = self.run_lightbox_dialog(dialog)

        return rc
Exemple #21
0
    def on_specialized_clicked(self, button):
        # there will be changes in disk selection, revert storage to an early snapshot (if it exists)
        if on_disk_storage.created:
            on_disk_storage.reset_to_snapshot(self.storage)

        # Don't want to run apply or execute in this case, since we have to
        # collect some more disks first.  The user will be back to this spoke.
        self.applyOnSkip = False

        # However, we do want to apply current selections so the disk cart off
        # the filter spoke will display the correct information.
        applyDiskSelection(self.storage, self.data, self.selected_disks)

        self.skipTo = "FilterSpoke"
        NormalSpoke.on_back_clicked(self, button)
Exemple #22
0
    def on_specialized_clicked(self, button):
        # there will be changes in disk selection, revert storage to an early snapshot (if it exists)
        if on_disk_storage.created:
            on_disk_storage.reset_to_snapshot(self.storage)

        # Don't want to run apply or execute in this case, since we have to
        # collect some more disks first.  The user will be back to this spoke.
        self.applyOnSkip = False

        # However, we do want to apply current selections so the disk cart off
        # the filter spoke will display the correct information.
        applyDiskSelection(self.storage, self.data, self.selected_disks)

        self.skipTo = "FilterSpoke"
        NormalSpoke.on_back_clicked(self, button)
Exemple #23
0
 def _doExecute(self):
     self._ready = False
     hubQ.send_not_ready(self.__class__.__name__)
     # on the off-chance dasdfmt is running, we can't proceed further
     threadMgr.wait(constants.THREAD_DASDFMT)
     hubQ.send_message(self.__class__.__name__,
                       _("Saving storage configuration..."))
     if flags.automatedInstall and self.data.autopart.encrypted and not self.data.autopart.passphrase:
         self.autopart_missing_passphrase = True
         StorageChecker.errors = [
             _("Passphrase for autopart encryption not specified.")
         ]
         self._ready = True
         hubQ.send_ready(self.__class__.__name__, True)
         return
     try:
         doKickstartStorage(self.storage, self.data, self.instclass)
     except (StorageError, KickstartParseError) as e:
         log.error("storage configuration failed: %s", e)
         StorageChecker.errors = str(e).split("\n")
         hubQ.send_message(self.__class__.__name__,
                           _("Failed to save storage configuration..."))
         self.data.bootloader.bootDrive = ""
         self.data.ignoredisk.drives = []
         self.data.ignoredisk.onlyuse = []
         self.storage.config.update(self.data)
         self.storage.reset()
         self.disks = getDisks(self.storage.devicetree)
         # now set ksdata back to the user's specified config
         applyDiskSelection(self.storage, self.data, self.selected_disks)
     except BootLoaderError as e:
         log.error("BootLoader setup failed: %s", e)
         StorageChecker.errors = str(e).split("\n")
         hubQ.send_message(self.__class__.__name__,
                           _("Failed to save storage configuration..."))
         self.data.bootloader.bootDrive = ""
     else:
         if self.autopart or (flags.automatedInstall and
                              (self.data.autopart.autopart
                               or self.data.partition.seen)):
             # run() executes StorageChecker.checkStorage in a seperate threat
             self.run()
     finally:
         resetCustomStorageData(self.data)
         self._ready = True
         hubQ.send_ready(self.__class__.__name__, True)
Exemple #24
0
 def execute(self):
     print(_("Generating updated storage configuration"))
     try:
         doKickstartStorage(self.storage, self.data, self.instclass)
     except (StorageError, KickstartValueError) as e:
         log.error("storage configuration failed: %s", e)
         print(_("storage configuration failed: %s") % e)
         self.errors = [str(e)]
         self.data.bootloader.bootDrive = ""
         self.data.clearpart.type = CLEARPART_TYPE_ALL
         self.data.clearpart.initAll = False
         self.storage.config.update(self.data)
         self.storage.autoPartType = self.data.autopart.type
         self.storage.reset()
         # now set ksdata back to the user's specified config
         applyDiskSelection(self.storage, self.data, self.selected_disks)
     except BootLoaderError as e:
         log.error("BootLoader setup failed: %s", e)
         print(_("storage configuration failed: %s") % e)
         self.errors = [str(e)]
         self.data.bootloader.bootDrive = ""
     else:
         print(_("Checking storage configuration..."))
         exns = sanity_check(self.storage)
         errors = [
             exn.message for exn in exns if isinstance(exn, SanityError)
         ]
         warnings = [
             exn.message for exn in exns if isinstance(exn, SanityWarning)
         ]
         (self.errors, self.warnings) = (errors, warnings)
         for e in self.errors:
             log.error(e)
             print(e)
         for w in self.warnings:
             log.warning(w)
             print(w)
     finally:
         resetCustomStorageData(self.data)
         self._ready = True
Exemple #25
0
 def _doExecute(self):
     self._ready = False
     hubQ.send_not_ready(self.__class__.__name__)
     # on the off-chance dasdfmt is running, we can't proceed further
     threadMgr.wait(constants.THREAD_DASDFMT)
     hubQ.send_message(self.__class__.__name__, _("Saving storage configuration..."))
     if flags.automatedInstall and self.data.autopart.encrypted and not self.data.autopart.passphrase:
         self.autopart_missing_passphrase = True
         StorageChecker.errors = [_("Passphrase for autopart encryption not specified.")]
         self._ready = True
         hubQ.send_ready(self.__class__.__name__, True)
         return
     try:
         doKickstartStorage(self.storage, self.data, self.instclass)
     except (StorageError, KickstartParseError) as e:
         log.error("storage configuration failed: %s", e)
         StorageChecker.errors = str(e).split("\n")
         hubQ.send_message(self.__class__.__name__, _("Failed to save storage configuration..."))
         self.data.bootloader.bootDrive = ""
         self.data.ignoredisk.drives = []
         self.data.ignoredisk.onlyuse = []
         self.storage.config.update(self.data)
         self.storage.reset()
         self.disks = getDisks(self.storage.devicetree)
         # now set ksdata back to the user's specified config
         applyDiskSelection(self.storage, self.data, self.selected_disks)
     except BootLoaderError as e:
         log.error("BootLoader setup failed: %s", e)
         StorageChecker.errors = str(e).split("\n")
         hubQ.send_message(self.__class__.__name__, _("Failed to save storage configuration..."))
         self.data.bootloader.bootDrive = ""
     else:
         if self.autopart or (flags.automatedInstall and (self.data.autopart.autopart or self.data.partition.seen)):
             # run() executes StorageChecker.checkStorage in a seperate threat
             self.run()
     finally:
         resetCustomStorageData(self.data)
         self._ready = True
         hubQ.send_ready(self.__class__.__name__, True)
Exemple #26
0
 def execute(self):
     print(_("Generating updated storage configuration"))
     try:
         doKickstartStorage(self.storage, self.data, self.instclass)
     except (StorageError, KickstartValueError) as e:
         log.error("storage configuration failed: %s", e)
         print(_("storage configuration failed: %s") % e)
         self.errors = [str(e)]
         self.data.bootloader.bootDrive = ""
         self.data.clearpart.type = CLEARPART_TYPE_ALL
         self.data.clearpart.initAll = False
         self.storage.config.update(self.data)
         self.storage.autoPartType = self.data.autopart.type
         self.storage.reset()
         # now set ksdata back to the user's specified config
         applyDiskSelection(self.storage, self.data, self.selected_disks)
     except BootLoaderError as e:
         log.error("BootLoader setup failed: %s", e)
         print(_("storage configuration failed: %s") % e)
         self.errors = [str(e)]
         self.data.bootloader.bootDrive = ""
     else:
         print(_("Checking storage configuration..."))
         exns = sanity_check(self.storage)
         errors = [str(exn) for exn in exns if isinstance(exn, SanityError)]
         warnings = [str(exn) for exn in exns if isinstance(exn, SanityWarning)]
         (self.errors, self.warnings) = (errors, warnings)
         for e in self.errors:
             log.error(e)
             print(e)
         for w in self.warnings:
             log.warning(w)
             print(w)
     finally:
         resetCustomStorageData(self.data)
         self._ready = True
Exemple #27
0
    def on_back_clicked(self, button):
        # We can't exit early if it looks like nothing has changed because the
        # user might want to change settings presented in the dialogs shown from
        # within this method.

        # Do not enter this method multiple times if user clicking multiple times
        # on back button
        if self._back_clicked:
            return
        else:
            self._back_clicked = True

        # Remove all non-existing devices if autopart was active when we last
        # refreshed.
        if self._previous_autopart:
            self._previous_autopart = False
            for partition in self.storage.partitions[:]:
                # check if it's been removed in a previous iteration
                if not partition.exists and \
                   partition in self.storage.partitions:
                    self.storage.recursiveRemove(partition)

        # make sure no containers were split up by the user's disk selection
        self.clear_info()
        self.errors = checkDiskSelection(self.storage, self.selected_disks)
        if self.errors:
            # The disk selection has to make sense before we can proceed.
            self.set_error(_("There was a problem with your disk selection. "
                             "Click here for details."))
            self._back_clicked = False
            return

        # hide/unhide disks as requested
        for disk in self.disks:
            if disk.name not in self.selected_disks and \
               disk in self.storage.devices:
                self.storage.devicetree.hide(disk)
            elif disk.name in self.selected_disks and \
                 disk not in self.storage.devices:
                self.storage.devicetree.unhide(disk)

        # show the installation options dialog
        disks = [d for d in self.disks if d.name in self.selected_disks]
        disks_size = sum((d.size for d in disks), Size(0))

        # No disks selected?  The user wants to back out of the storage spoke.
        if not disks:
            NormalSpoke.on_back_clicked(self, button)
            return

        if arch.isS390():
            # check for unformatted DASDs and launch dasdfmt if any discovered
            dasds = self.storage.devicetree.make_unformatted_dasd_list(disks)
            if len(dasds) > 0:
                # We want to apply current selection before running dasdfmt to
                # prevent this information from being lost afterward
                applyDiskSelection(self.storage, self.data, self.selected_disks)
                dialog = DasdFormatDialog(self.data, self.storage, dasds)
                ignoreEscape(dialog.window)
                rc = self.run_lightbox_dialog(dialog)
                if rc == 1:
                    # User hit OK on the dialog
                    self.refresh()
                elif rc == 2:
                    # User clicked uri to return to hub.
                    NormalSpoke.on_back_clicked(self, button)
                    return
                elif rc != 2:
                    # User either hit cancel on the dialog or closed it via escape,
                    # there was no formatting done.
                    # NOTE: rc == 2 means the user clicked on the link that takes t
                    # back to the hub.
                    self._back_clicked = False
                    return

        # Figure out if the existing disk labels will work on this platform
        # you need to have at least one of the platform's labels in order for
        # any of the free space to be useful.
        disk_labels = set(disk.format.labelType for disk in disks
                              if hasattr(disk.format, "labelType"))
        platform_labels = set(platform.diskLabelTypes)
        if disk_labels and platform_labels.isdisjoint(disk_labels):
            disk_free = 0
            fs_free = 0
            log.debug("Need disklabel: %s have: %s", ", ".join(platform_labels),
                                                     ", ".join(disk_labels))
        else:
            free_space = self.storage.getFreeSpace(disks=disks,
                                                   clearPartType=CLEARPART_TYPE_NONE)
            disk_free = sum(f[0] for f in free_space.values())
            fs_free = sum(f[1] for f in free_space.values())

        required_space = self.payload.spaceRequired
        auto_swap = sum((r.size for r in self.storage.autoPartitionRequests
                                if r.fstype == "swap"), Size(0))
        if self.autopart and auto_swap == Size(0):
            # autopartitioning requested, but not applied yet (=> no auto swap
            # requests), ask user for enough space to fit in the suggested swap
            auto_swap = autopart.swapSuggestion()

        log.debug("disk free: %s  fs free: %s  sw needs: %s  auto swap: %s",
                  disk_free, fs_free, required_space, auto_swap)

        if disk_free >= required_space + auto_swap:
            dialog = None
        elif disks_size >= required_space:
            if self._customPart.get_active() or self._reclaim.get_active():
                dialog = None
            else:
                dialog = NeedSpaceDialog(self.data, payload=self.payload)
                dialog.refresh(required_space, auto_swap, disk_free, fs_free)
                rc = self.run_lightbox_dialog(dialog)
        else:
            dialog = NoSpaceDialog(self.data, payload=self.payload)
            dialog.refresh(required_space, auto_swap, disk_free, fs_free)
            rc = self.run_lightbox_dialog(dialog)

        if not dialog:
            # Plenty of room - there's no need to pop up a dialog, so just send
            # the user to wherever they asked to go.  That's either the custom
            # spoke or the hub.
            #    - OR -
            # Not enough room, but the user checked the reclaim button.

            self.encrypted = self._encrypted.get_active()

            if self._customPart.get_active():
                self.autopart = False
                self.skipTo = "CustomPartitioningSpoke"
            else:
                self.autopart = True

                # We might first need to ask about an encryption passphrase.
                if not self._check_encrypted():
                    self._back_clicked = False
                    return

                # Oh and then we might also want to go to the reclaim dialog.
                if self._reclaim.get_active():
                    self.apply()
                    if not self._show_resize_dialog(disks):
                        # User pressed cancel on the reclaim dialog, so don't leave
                        # the storage spoke.
                        self._back_clicked = False
                        return
        elif rc == RESPONSE_CANCEL:
            # A cancel button was clicked on one of the dialogs.  Stay on this
            # spoke.  Generally, this is because the user wants to add more disks.
            self._back_clicked = False
            return
        elif rc == RESPONSE_MODIFY_SW:
            # The "Fedora software selection" link was clicked on one of the
            # dialogs.  Send the user to the software spoke.
            self.skipTo = "SoftwareSelectionSpoke"
        elif rc == RESPONSE_RECLAIM:
            # Not enough space, but the user can make enough if they do some
            # work and free up space.
            self.encrypted = self._encrypted.get_active()

            if not self._check_encrypted():
                return

            self.apply()
            if not self._show_resize_dialog(disks):
                # User pressed cancel on the reclaim dialog, so don't leave
                # the storage spoke.
                self._back_clicked = False
                return

            # And then go to the custom partitioning spoke if they chose to
            # do so.
            if self._customPart.get_active():
                self.autopart = False
                self.skipTo = "CustomPartitioningSpoke"
            else:
                self.autopart = True
        elif rc == RESPONSE_QUIT:
            # Not enough space, and the user can't do anything about it so
            # they chose to quit.
            raise SystemExit("user-selected exit")
        else:
            # I don't know how we'd get here, but might as well have a
            # catch-all.  Just stay on this spoke.
            self._back_clicked = False
            return

        if self.autopart:
            refreshAutoSwapSize(self.storage)
        self.applyOnSkip = True
        NormalSpoke.on_back_clicked(self, button)
Exemple #28
0
    def on_back_clicked(self, button):
        # We can't exit early if it looks like nothing has changed because the
        # user might want to change settings presented in the dialogs shown from
        # within this method.

        # Do not enter this method multiple times if user clicking multiple times
        # on back button
        if self._back_clicked:
            return
        else:
            self._back_clicked = True

        # Remove all non-existing devices if autopart was active when we last
        # refreshed.
        if self._previous_autopart:
            self._previous_autopart = False
            for partition in self.storage.partitions[:]:
                # check if it's been removed in a previous iteration
                if not partition.exists and \
                   partition in self.storage.partitions:
                    self.storage.recursiveRemove(partition)

        # make sure no containers were split up by the user's disk selection
        self.clear_info()
        self.errors = checkDiskSelection(self.storage, self.selected_disks)
        if self.errors:
            # The disk selection has to make sense before we can proceed.
            self.set_error(
                _("There was a problem with your disk selection. "
                  "Click here for details."))
            self._back_clicked = False
            return

        # hide/unhide disks as requested
        for disk in self.disks:
            if disk.name not in self.selected_disks and \
               disk in self.storage.devices:
                self.storage.devicetree.hide(disk)
            elif disk.name in self.selected_disks and \
                 disk not in self.storage.devices:
                self.storage.devicetree.unhide(disk)

        # show the installation options dialog
        disks = [d for d in self.disks if d.name in self.selected_disks]
        disks_size = sum((d.size for d in disks), Size(0))

        # No disks selected?  The user wants to back out of the storage spoke.
        if not disks:
            NormalSpoke.on_back_clicked(self, button)
            return

        if arch.isS390():
            # check for unformatted DASDs and launch dasdfmt if any discovered
            dasds = self.storage.devicetree.make_unformatted_dasd_list(disks)
            if len(dasds) > 0:
                # We want to apply current selection before running dasdfmt to
                # prevent this information from being lost afterward
                applyDiskSelection(self.storage, self.data,
                                   self.selected_disks)
                dialog = DasdFormatDialog(self.data, self.storage, dasds)
                ignoreEscape(dialog.window)
                rc = self.run_lightbox_dialog(dialog)
                if rc == 1:
                    # User hit OK on the dialog
                    self.refresh()
                elif rc == 2:
                    # User clicked uri to return to hub.
                    NormalSpoke.on_back_clicked(self, button)
                    return
                elif rc != 2:
                    # User either hit cancel on the dialog or closed it via escape,
                    # there was no formatting done.
                    # NOTE: rc == 2 means the user clicked on the link that takes t
                    # back to the hub.
                    self._back_clicked = False
                    return

        # Figure out if the existing disk labels will work on this platform
        # you need to have at least one of the platform's labels in order for
        # any of the free space to be useful.
        disk_labels = set(disk.format.labelType for disk in disks
                          if hasattr(disk.format, "labelType"))
        platform_labels = set(platform.diskLabelTypes)
        if disk_labels and platform_labels.isdisjoint(disk_labels):
            disk_free = 0
            fs_free = 0
            log.debug("Need disklabel: %s have: %s",
                      ", ".join(platform_labels), ", ".join(disk_labels))
        else:
            free_space = self.storage.getFreeSpace(
                disks=disks, clearPartType=CLEARPART_TYPE_NONE)
            disk_free = sum(f[0] for f in free_space.values())
            fs_free = sum(f[1] for f in free_space.values())

        required_space = self.payload.spaceRequired
        auto_swap = sum((r.size for r in self.storage.autoPartitionRequests
                         if r.fstype == "swap"), Size(0))
        if self.autopart and auto_swap == Size(0):
            # autopartitioning requested, but not applied yet (=> no auto swap
            # requests), ask user for enough space to fit in the suggested swap
            auto_swap = autopart.swapSuggestion()

        log.debug("disk free: %s  fs free: %s  sw needs: %s  auto swap: %s",
                  disk_free, fs_free, required_space, auto_swap)

        if disk_free >= required_space + auto_swap:
            dialog = None
        elif disks_size >= required_space:
            if self._customPart.get_active() or self._reclaim.get_active():
                dialog = None
            else:
                dialog = NeedSpaceDialog(self.data, payload=self.payload)
                dialog.refresh(required_space, auto_swap, disk_free, fs_free)
                rc = self.run_lightbox_dialog(dialog)
        else:
            dialog = NoSpaceDialog(self.data, payload=self.payload)
            dialog.refresh(required_space, auto_swap, disk_free, fs_free)
            rc = self.run_lightbox_dialog(dialog)

        if not dialog:
            # Plenty of room - there's no need to pop up a dialog, so just send
            # the user to wherever they asked to go.  That's either the custom
            # spoke or the hub.
            #    - OR -
            # Not enough room, but the user checked the reclaim button.

            self.encrypted = self._encrypted.get_active()

            if self._customPart.get_active():
                self.autopart = False
                self.skipTo = "CustomPartitioningSpoke"
            else:
                self.autopart = True

                # We might first need to ask about an encryption passphrase.
                if not self._check_encrypted():
                    self._back_clicked = False
                    return

                # Oh and then we might also want to go to the reclaim dialog.
                if self._reclaim.get_active():
                    self.apply()
                    if not self._show_resize_dialog(disks):
                        # User pressed cancel on the reclaim dialog, so don't leave
                        # the storage spoke.
                        self._back_clicked = False
                        return
        elif rc == RESPONSE_CANCEL:
            # A cancel button was clicked on one of the dialogs.  Stay on this
            # spoke.  Generally, this is because the user wants to add more disks.
            self._back_clicked = False
            return
        elif rc == RESPONSE_MODIFY_SW:
            # The "Fedora software selection" link was clicked on one of the
            # dialogs.  Send the user to the software spoke.
            self.skipTo = "SoftwareSelectionSpoke"
        elif rc == RESPONSE_RECLAIM:
            # Not enough space, but the user can make enough if they do some
            # work and free up space.
            self.encrypted = self._encrypted.get_active()

            if not self._check_encrypted():
                return

            self.apply()
            if not self._show_resize_dialog(disks):
                # User pressed cancel on the reclaim dialog, so don't leave
                # the storage spoke.
                self._back_clicked = False
                return

            # And then go to the custom partitioning spoke if they chose to
            # do so.
            if self._customPart.get_active():
                self.autopart = False
                self.skipTo = "CustomPartitioningSpoke"
            else:
                self.autopart = True
        elif rc == RESPONSE_QUIT:
            # Not enough space, and the user can't do anything about it so
            # they chose to quit.
            raise SystemExit("user-selected exit")
        else:
            # I don't know how we'd get here, but might as well have a
            # catch-all.  Just stay on this spoke.
            self._back_clicked = False
            return

        if self.autopart:
            refreshAutoSwapSize(self.storage)
        self.applyOnSkip = True
        NormalSpoke.on_back_clicked(self, button)