class RGBResource:
def __init__(self):
self.rgb = (0, 0, 0)
self.blinkm = BlinkM()
self.blinkm.reset()
def _send_reponse(self, resp):
red, green, blue = self.rgb
body = {
"red": self.rgb[0],
"green": self.rgb[1],
"blue": self.rgb[2]
}
resp.body = json.dumps(body)
def on_get(self, req, resp):
self._send_reponse(resp)
def on_post(self, req, resp):
body = req.stream.read()
data = json.loads(body.decode('utf-8'))
self.rgb = (
data['red'],
data['green'],
data['blue']
)
self.blinkm.fade_to(
self.rgb[0],
self.rgb[1],
self.rgb[2]
)
self._send_reponse(resp)
def __init__(self):
self.log('AquaPi initializing...')
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)
GPIO.setup(PIN_POWER, GPIO.OUT)
self.led = BlinkM()
self.led.reset()
self.led.set_fade_speed(self.led_fade_speed)
# self.led.write_script_line(Scripts.TRANSFER, 0, 10, 'c', 0xff, 0xff, 0xff)
# self.led.write_script_line(Scripts.TRANSFER, 1, 10, 'c', 0x00, 0x00, 0x00)
self.spi = spidev.SpiDev()
self.spi.open(0, SPI_ADC)
self.sio = serial.Serial('/dev/ttyAMA0', 9600, serial.EIGHTBITS, serial.PARITY_NONE, serial.STOPBITS_ONE, 1)
self.sensor_temp = TempSensor(self.spi, ADC_TEMP)
self.sensor_light = AnalogSensor(self.spi, ADC_LIGHT)
self.sensor_liquid = SerialSensor(self.sio)
self.metro_sensor_sample = Metro(500)
self.metro_sensor_send = Metro(30000)
self.metro_poll = Metro(6000)
self.metro_health = Metro(180000)
self.events = deque()
self.running = False
self.current_color = False
self.happy()
def __init__(self, name): #so we can have many different leds self.name = name self.led = BlinkM() self.delay(2) self.led.reset() self.delay(1) self.led.set_fade_speed(32) self.delay(1)
class AquaPi:
DEBUG = False
HOST = 'http://aqua.willandchi.com'
ENDPOINT_POLL = '/v1/poll'
ENDPOINT_EVENT = '/v1/events'
timeout = 5
led_fade_speed = 64
def __init__(self):
self.log('AquaPi initializing...')
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)
GPIO.setup(PIN_POWER, GPIO.OUT)
self.led = BlinkM()
self.led.reset()
self.led.set_fade_speed(self.led_fade_speed)
# self.led.write_script_line(Scripts.TRANSFER, 0, 10, 'c', 0xff, 0xff, 0xff)
# self.led.write_script_line(Scripts.TRANSFER, 1, 10, 'c', 0x00, 0x00, 0x00)
self.spi = spidev.SpiDev()
self.spi.open(0, SPI_ADC)
self.sio = serial.Serial('/dev/ttyAMA0', 9600, serial.EIGHTBITS, serial.PARITY_NONE, serial.STOPBITS_ONE, 1)
self.sensor_temp = TempSensor(self.spi, ADC_TEMP)
self.sensor_light = AnalogSensor(self.spi, ADC_LIGHT)
self.sensor_liquid = SerialSensor(self.sio)
self.metro_sensor_sample = Metro(500)
self.metro_sensor_send = Metro(30000)
self.metro_poll = Metro(6000)
self.metro_health = Metro(180000)
self.events = deque()
self.running = False
self.current_color = False
self.happy()
def loop(self):
self.log("Loop...")
if self.metro_health.check():
self.log("Health checks are failing. I'm sad :(")
self.sad()
self.event('error', 'health-check-failure')
if self.metro_sensor_sample.check():
self.log("Sampling sensors...")
self.sensor_temp.read()
self.sensor_light.read()
self.sensor_liquid.read()
if self.metro_sensor_send.check():
self.log("Creating sensor events...")
# Temperature Sensor
self.event('temp', round(self.sensor_temp.fahrenheit(), 2))
# Light Sensor
self.event('light', self.sensor_light.value())
# Ultrasonic Range Finder
self.event('liquid', round((URF_EMPTY - self.sensor_liquid.value()) / (URF_EMPTY - URF_FULL) * 100.0, 2))
if self.metro_poll.check():
self.poll()
self.send_events()
time.sleep(0.1)
def poll(self):
self.log('Polling...')
self.led_script(Scripts.TRANSFER)
self.current_color = colors.white
try:
r = requests.get(self.HOST + self.ENDPOINT_POLL,
auth=(credentials.username, credentials.password),
timeout=self.timeout)
self.log(r.text)
if r.status_code == 200:
data = r.json()
if len(data):
self.power(data['power'] == 'on')
self.metro_health.reset()
self.happy()
else:
self.log('Polling non-200 response')
self.event('error', 'poll-non-200')
self.sad()
except requests.RequestException:
self.log('Polling failed')
self.event('error', 'poll-exception')
self.sad()
def send_events(self):
if len(self.events) > 0:
self.log('Sending event...')
event = self.events.popleft()
self.log(json.dumps(event))
self.led_script(Scripts.TRANSFER)
self.current_color = colors.white
try:
r = requests.post(self.HOST + self.ENDPOINT_EVENT,
data=event,
auth=(credentials.username, credentials.password),
timeout=self.timeout)
if r.status_code == 200:
self.metro_health.reset()
self.happy()
else:
self.log('Sending event non-200 response')
self.event('error', 'event-non-200')
self.sad()
except requests.RequestException:
self.events.appendleft(event)
self.log('Sending event failed')
self.event('error', 'event-exception')
self.sad()
def power(self, on):
if on:
GPIO.output(PIN_POWER, True)
self.running = True
self.happy()
self.event('power', 'on')
else:
GPIO.output(PIN_POWER, False)
self.running = False
self.happy()
self.event('power', 'off')
def event(self, name, data):
self.events.append({
'event': name,
'data': data
})
def sad(self):
if self.current_color != colors.red:
self.led_script(Scripts.RED_FLASH)
self.current_color = colors.red
def happy(self):
if self.running:
if self.current_color != colors.blue:
self.led_script(Scripts.BLUE_FLASH)
self.current_color = colors.blue
else:
if self.current_color != colors.green:
self.led_color(colors.green)
self.current_color = colors.green
def led_script(self, script):
try:
self.led.reset()
self.led.play_script(script)
except IOError:
self.log('Playing led script failed')
self.event('led', 'error')
def led_color(self, color):
try:
self.led.reset()
self.led.go_to_hex(color)
except IOError:
self.log('Changing led color failed')
self.event('led', 'error')
def log(self, msg):
if self.DEBUG:
print "[{}] {}".format(time.strftime('%Y-%m-%d %H:%M:%S'), msg)
def Execute_Action_Button(root):
# conditionally import BlinkM
if (Config.i2c_demo()):
from pyblinkm import BlinkM, Scripts
# find the interface object type
objectServerID = root.find("./OBJECTSERVERID").text
objectName = root.find("./OBJECTNAME").text
objectFlags = root.find("./OBJECTFLAGS").text
validate = Validate.checkForValidate(root)
if (Config.debug()):
print("VALIDATE=%s" % validate)
outgoingXMLData = BuildResponse.buildHeader(root)
if (Config.debug()):
print("objectServerID = %s" % objectServerID)
# we have the objectServerID so now we can choose the correct
# program
# FB-1 just does a toggle from on to off from the button name
if (objectServerID == "FB-1"):
# do a toggle
#check for validate request
if (validate == "YES"):
outgoingXMLData += Validate.buildValidateResponse("YES")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
responseData = "XXX"
lowername = objectName.lower()
if (lowername.count(" off") > 0):
lowername = lowername.replace(" off", " on")
responseData = lowername.title()
elif (lowername.count(" on") > 0):
lowername = lowername.replace(" on", " off")
responseData = lowername.title()
else:
responseData = objectName
outgoingXMLData += BuildResponse.buildResponse(responseData)
# B-1 does a toggle on a BlinkM module on I2C bus address 0xb (11)
elif (objectServerID == "B-1"):
# do a toggle
#check for validate request
if (validate == "YES"):
outgoingXMLData += Validate.buildValidateResponse("YES")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
if (Config.debug()):
print("Config.i2c_demo=%i" % Config.i2c_demo())
if (Config.i2c_demo()):
blinkm = BlinkM(1,0xb)
blinkm.reset()
try:
blinkm.go_to(0, 0, 255)
time.sleep(0.2)
blinkm.go_to(0, 255, 0)
responseData = "OK"
except IOError as e:
#blinkm.reset()
print("I/O error({0}): {1}".format(e.errno, e.strerror))
responseData = "FAILED"
except:
blinkm.reset()
print("Unexpected error:", sys.exc_info()[0])
raise
responseData = "OK"
outgoingXMLData += BuildResponse.buildResponse(responseData)
else:
# invalid RaspiConnect Code
outgoingXMLData += Validate.buildValidateResponse("NO")
outgoingXMLData += BuildResponse.buildFooter()
if (Config.debug()):
print(outgoingXMLData)
return outgoingXMLData
def Execute_Action_Button(root):
# conditionally import BlinkM
if (Config.i2c_demo()):
from pyblinkm import BlinkM, Scripts
# find the interface object type
objectServerID = root.find("./OBJECTSERVERID").text
objectName = root.find("./OBJECTNAME").text
objectFlags = root.find("./OBJECTFLAGS").text
validate = Validate.checkForValidate(root)
if (Config.debug()):
print "VALIDATE=%s" % validate
outgoingXMLData = BuildResponse.buildHeader(root)
if (Config.debug()):
print("objectServerID = %s" % objectServerID)
# we have the objectServerID so now we can choose the correct
# program
# FB-1 just does a toggle from on to off from the button name
if (objectServerID == "FB-1"):
# do a toggle
#check for validate request
if (validate == "YES"):
outgoingXMLData += Validate.buildValidateResponse("YES")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
responseData = "XXX"
lowername = objectName.lower()
if (lowername.count(" off") > 0):
lowername = lowername.replace(" off", " on")
responseData = lowername.title()
elif (lowername.count(" on") > 0):
lowername = lowername.replace(" on", " off")
responseData = lowername.title()
else:
responseData = objectName
outgoingXMLData += BuildResponse.buildResponse(responseData)
# B-1 does a toggle on a BlinkM module on I2C bus address 0xb (11)
elif (objectServerID == "B-1"):
# do a toggle
#check for validate request
if (validate == "YES"):
outgoingXMLData += Validate.buildValidateResponse("YES")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
if (Config.debug()):
print "Config.i2c_demo=%i" % Config.i2c_demo()
if (Config.i2c_demo()):
blinkm = BlinkM(1,0xb)
blinkm.reset()
try:
blinkm.go_to(0, 0, 255)
time.sleep(0.2)
blinkm.go_to(0, 255, 0)
responseData = "OK"
except IOError as e:
#blinkm.reset()
print "I/O error({0}): {1}".format(e.errno, e.strerror)
responseData = "FAILED"
except:
blinkm.reset()
print "Unexpected error:", sys.exc_info()[0]
raise
responseData = "OK"
outgoingXMLData += BuildResponse.buildResponse(responseData)
else:
# invalid RaspiConnect Code
outgoingXMLData += Validate.buildValidateResponse("NO")
outgoingXMLData += BuildResponse.buildFooter()
if (Config.debug()):
print outgoingXMLData
return outgoingXMLData
# End of ExecuteActionButton.py
class Led():
def __init__(self, name):
#so we can have many different leds
self.name = name
self.led = BlinkM()
self.delay(2)
self.led.reset()
self.delay(1)
self.led.set_fade_speed(32)
self.delay(1)
def delay(self, seconds):
time.sleep(seconds)
def show_status_light(self):
self.led.fade_to_hex("0000ff")
self.delay(1)
def show_thinking_light(self):
#self.led.play_script(Scripts.WHITE_FLASH)
self.led.fade_to_hex("ffffff")
self.delay(1)
def show_positive_light(self):
#self.led.stop_script()
self.led.fade_to_hex("00ff00")
self.delay(1)
def show_negative_light(self):
#self.led.stop_script()
self.led.fade_to_hex("ff0000")
self.delay(1)
if 2 != len(sys.argv):
print usageLine
exit(1)
# Grab the first argument. (Not argv[0], that's the command name.)
arg1 = int(sys.argv[1])
# range() is a little unintuitive, to me. range(0, 256) excludes 256, meaning
# it includes numbers 0 - 255, inclusive.
if not arg1 in range(0, 256):
print usageLine
exit(1)
# Get the i2c bus number, then create a blinkm object with that bus number.
bus = GFDITools.guessBus()
blinkm = BlinkM(bus=bus)
# Issue the command to the I2C
blinkm.reset()
blinkm.go_to(arg1, arg1, arg1)
sys.exit(0)
# BlinkM makes some scripts available, which flash the lights in various
# patterns. They're included here in commented form. Copy lines as needed, or
# uncomment the whole block if you want to throw a rave.
'''
raw_input("Press Enter to continue...")
print "STARTUP\n"
blinkm.play_script(Scripts.STARTUP)
def Generate_Remote_WebView(root, LOCALURL):
if (Config.i2c_demo()):
from pyblinkm import BlinkM, Scripts
objectServerID = root.find("./OBJECTSERVERID").text
objectFlags = root.find("./OBJECTFLAGS").text
validate = Validate.checkForValidate(root)
if (Config.debug()):
print "VALIDATE=%s" % validate
outgoingXMLData = BuildResponse.buildHeader(root)
if (objectServerID == "W-1"):
#check for validate request
if (validate == "YES"):
outgoingXMLData += Validate.buildValidateResponse("YES")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
# normal response requested
responseData = ""
# check to see if i2c_demo is turned on
if (Config.i2c_demo()):
if (Config.debug()):
print "Config.i2c_demo passed as True"
# Yes, it is on
# Initialise the BMP085 and use STANDARD mode (default value)
# bmp = BMP085(0x77, debug=True)
# bmp = BMP085(0x77)
# To specify a different operating mode, uncomment one of the following:
# bmp = BMP085(0x77, 0) # ULTRALOWPOWER Mode
# bmp = BMP085(0x77, 1) # STANDARD Mode
# bmp = BMP085(0x77, 2) # HIRES Mode
bmp = BMP085(0x77, 3) # ULTRAHIRES Mode
count = 0
exceptionCount = 0
exceptionCountBMP = 0
blinkm = BlinkM(1,0xc)
blinkm.reset()
try:
temp = bmp.readTemperature()
pressure = bmp.readPressure()
altitude = bmp.readAltitude()
tempData = "%.2f C" % temp
pressureData = "%.2f hPa" % (pressure / 100.0)
except IOError as e:
exceptionCountBMP = exceptionCountBMP + 1
print "I/O error({0}): {1}".format(e.errno, e.strerror)
except:
exceptionCountBMP = exceptionCountBMP + 1
print "Unexpected error:", sys.exc_info()[0]
raise
else: # now set some values for display since we don't have i2C
tempData = "xx.x C (no i2c enabled)"
pressureData = "xxxx.x hPa (no i2c enabled)"
# read an HTML template into aw string
with open ("./Templates/W-1.html", "r") as myfile:
responseData += myfile.read().replace('\n', '')
# replace the URL so it will point to static
responseData = responseData.replace("XXX", LOCALURL)
# now replace the AAA, BBB, etc with the right data
responseData = responseData.replace("AAA", subprocess.check_output(["date", ""], shell=True))
# split uptime at first blank, then at first ,
uptimeString = subprocess.check_output(["uptime", ""])
uptimeType = uptimeString.split(",")
uptimeCount = len(uptimeType)
if (uptimeCount == 6):
# over 24 hours
uptimeSplit = uptimeString.split(",")
uptimeSplit = uptimeSplit[0]+uptimeSplit[1]
uptimeSplit = uptimeSplit.split(" ", 1)
uptimeData = uptimeSplit[1]
else:
# under 24 hours
uptimeSplit = uptimeString.split(" ", 2)
uptimeSplit = uptimeSplit[2].split(",", 1)
uptimeData = uptimeSplit[0]
responseData = responseData.replace("BBB", uptimeData)
usersString = subprocess.check_output(["who", "-q"], shell=False, stderr=subprocess.STDOUT,)
responseData = responseData.replace("CCC", usersString)
freeString = subprocess.check_output(["free", "-mh"])
freeSplit = freeString.split("cache: ", 1)
freeSplit = freeSplit[1].split(" ", 2)
freeSplit = freeSplit[2].split("\nSwap:", 1)
freeData = freeSplit[0]
responseData = responseData.replace("DDD", freeData)
responseData = responseData.replace("EEE", tempData)
responseData = responseData.replace("FFF", pressureData)
output = subprocess.check_output(["cat", "/sys/class/thermal/thermal_zone0/temp"])
cpuTemp = "%3.2f C" % (float(output)/1000.0)
responseData = responseData.replace("GGG", cpuTemp)
freeString = subprocess.check_output(["ifconfig", "eth0"])
freeSplit = freeString.split("inet addr:", 1)
freeSplit = freeSplit[1].split(" ", 1)
freeData = freeSplit[0]
responseData = responseData.replace("HHH", freeData)
responseData = responseData.replace("III", Config.localURL())
# responseData = responseData.replace("III", "'your external address here'")
responseData = responseData.replace("JJJ", Config.version_number())
# read latest data from ST-1 SendText control on RasPiConnect
try:
with open ("./local/ST-1.txt", "r") as myfile:
sendTextData = myfile.read().replace('\n', '')
except IOError:
sendTextData = ""
responseData = responseData.replace("KKK", sendTextData)
# check to see if i2c_demo is turned on
if (Config.i2c_demo()):
time.sleep(0.2)
try:
blinkm.go_to(255, 0, 0)
time.sleep(0.2)
blinkm.go_to(0, 255, 0)
except IOError as e:
#blinkm.reset()
exceptionCount = exceptionCount + 1
print "I/O error({0}): {1}".format(e.errno, e.strerror)
except:
blinkm.reset()
exceptionCount = exceptionCount + 1
print "Unexpected error:", sys.exc_info()[0]
raise
#responseData += subprocess.check_output(["cat", "/proc/cpuinfo"])
#responseData += subprocess.check_output(["cat", "/proc/meminfo"])
outgoingXMLData += BuildResponse.buildResponse(responseData)
if (Config.debug()):
print outgoingXMLData
elif (objectServerID == "W-2"):
#check for validate request
if (validate == "YES"):
outgoingXMLData += Validate.buildValidateResponse("YES")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
# normal response requested
imageName = "RovioImage.jpg"
responseData = "<html><head>"
responseData += "<title></title><style>body,html,iframe{margin:0;padding:0;}</style>"
responseData += "</head>"
responseData += "<body><img src=\""
responseData += LOCALURL
responseData += "static/"
responseData += imageName
responseData += "\" type=\"jpg\" width=\"300\" height=\"300\">"
responseData += "<BR>Picture<BR>"
responseData +="</body>"
responseData += "</html>"
outgoingXMLData += BuildResponse.buildResponse(responseData)
if (Config.debug()):
print outgoingXMLData
else:
# invalid RaspiConnect Code
outgoingXMLData += Validate.buildValidateResponse("NO")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
def __init__(self):
self.rgb = (0, 0, 0)
self.blinkm = BlinkM()
self.blinkm.reset()
def Generate_Remote_WebView(root, LOCALURL):
if (Config.i2c_demo()):
from pyblinkm import BlinkM, Scripts
objectServerID = root.find("./OBJECTSERVERID").text
objectFlags = root.find("./OBJECTFLAGS").text
validate = Validate.checkForValidate(root)
if (Config.debug()):
print "VALIDATE=%s" % validate
outgoingXMLData = BuildResponse.buildHeader(root)
if (objectServerID == "W-1"):
#check for validate request
if (validate == "YES"):
outgoingXMLData += Validate.buildValidateResponse("YES")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
# normal response requested
responseData = ""
# check to see if i2c_demo is turned on
if (Config.i2c_demo()):
if (Config.debug()):
print "Config.i2c_demo passed as True"
# Yes, it is on
# Initialise the BMP085 and use STANDARD mode (default value)
# bmp = BMP085(0x77, debug=True)
# bmp = BMP085(0x77)
# To specify a different operating mode, uncomment one of the following:
# bmp = BMP085(0x77, 0) # ULTRALOWPOWER Mode
# bmp = BMP085(0x77, 1) # STANDARD Mode
# bmp = BMP085(0x77, 2) # HIRES Mode
bmp = BMP085(0x77, 3) # ULTRAHIRES Mode
count = 0
exceptionCount = 0
exceptionCountBMP = 0
blinkm = BlinkM(1,0xc)
blinkm.reset()
try:
temp = bmp.readTemperature()
pressure = bmp.readPressure()
altitude = bmp.readAltitude()
tempData = "%.2f C" % temp
pressureData = "%.2f hPa" % (pressure / 100.0)
except IOError as e:
exceptionCountBMP = exceptionCountBMP + 1
print "I/O error({0}): {1}".format(e.errno, e.strerror)
except:
exceptionCountBMP = exceptionCountBMP + 1
print "Unexpected error:", sys.exc_info()[0]
raise
else: # now set some values for display since we don't have i2C
tempData = "xx.x C (no i2c enabled)"
pressureData = "xxxx.x hPa (no i2c enabled)"
# read an HTML template into aw string
with open ("./Templates/W-1.html", "r") as myfile:
responseData += myfile.read().replace('\n', '')
# replace the URL so it will point to static
responseData = responseData.replace("XXX", LOCALURL)
# now replace the AAA, BBB, etc with the right data
responseData = responseData.replace("AAA", subprocess.check_output(["date", ""], shell=True))
# split uptime at first blank, then at first ,
uptimeString = subprocess.check_output(["uptime", ""])
uptimeType = uptimeString.split(",")
uptimeCount = len(uptimeType)
if (uptimeCount == 6):
# over 24 hours
uptimeSplit = uptimeString.split(",")
uptimeSplit = uptimeSplit[0]+uptimeSplit[1]
uptimeSplit = uptimeSplit.split(" ", 1)
uptimeData = uptimeSplit[1]
else:
# under 24 hours
uptimeSplit = uptimeString.split(" ", 2)
uptimeSplit = uptimeSplit[2].split(",", 1)
uptimeData = uptimeSplit[0]
responseData = responseData.replace("BBB", uptimeData)
usersString = subprocess.check_output(["who", "-q"], shell=False, stderr=subprocess.STDOUT,)
responseData = responseData.replace("CCC", usersString)
freeString = subprocess.check_output(["free", "-mh"])
freeSplit = freeString.split("cache: ", 1)
freeSplit = freeSplit[1].split(" ", 2)
freeSplit = freeSplit[2].split("\nSwap:", 1)
freeData = freeSplit[0]
responseData = responseData.replace("DDD", freeData)
responseData = responseData.replace("EEE", tempData)
responseData = responseData.replace("FFF", pressureData)
output = subprocess.check_output(["cat", "/sys/class/thermal/thermal_zone0/temp"])
cpuTemp = "%3.2f C" % (float(output)/1000.0)
responseData = responseData.replace("GGG", cpuTemp)
try:
freeString = subprocess.check_output(["ifconfig", "eth0"])
freeSplit = freeString.split("inet addr:", 1)
if (len(freeSplit) > 1):
freeSplit = freeSplit[1].split(" ", 1)
freeData = freeSplit[0]
else:
freeData = ""
except:
freeData = ""
responseData = responseData.replace("HHH", freeData)
responseData = responseData.replace("III", Config.localURL())
# responseData = responseData.replace("III", "'your external address here'")
responseData = responseData.replace("JJJ", Config.version_number())
# read latest data from ST-1 SendText control on RasPiConnect
try:
with open ("./local/ST-1.txt", "r") as myfile:
sendTextData = myfile.read().replace('\n', '')
except IOError:
sendTextData = ""
responseData = responseData.replace("KKK", sendTextData)
# check to see if i2c_demo is turned on
if (Config.i2c_demo()):
time.sleep(0.2)
try:
blinkm.go_to(255, 0, 0)
time.sleep(0.2)
blinkm.go_to(0, 255, 0)
except IOError as e:
#blinkm.reset()
exceptionCount = exceptionCount + 1
print "I/O error({0}): {1}".format(e.errno, e.strerror)
except:
blinkm.reset()
exceptionCount = exceptionCount + 1
print "Unexpected error:", sys.exc_info()[0]
raise
#responseData += subprocess.check_output(["cat", "/proc/cpuinfo"])
#responseData += subprocess.check_output(["cat", "/proc/meminfo"])
outgoingXMLData += BuildResponse.buildResponse(responseData)
if (Config.debug()):
print outgoingXMLData
elif (objectServerID == "W-2"):
#check for validate request
if (validate == "YES"):
outgoingXMLData += Validate.buildValidateResponse("YES")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
# normal response requested
imageName = "RovioImage.jpg"
responseData = "<html><head>"
responseData += "<title></title><style>body,html,iframe{margin:0;padding:0;}</style>"
responseData += "</head>"
responseData += "<body><img src=\""
responseData += LOCALURL
responseData += "static/"
responseData += imageName
responseData += "\" type=\"jpg\" width=\"300\" height=\"300\">"
responseData += "<BR>Picture<BR>"
responseData +="</body>"
responseData += "</html>"
outgoingXMLData += BuildResponse.buildResponse(responseData)
if (Config.debug()):
print outgoingXMLData
else:
# invalid RaspiConnect Code
outgoingXMLData += Validate.buildValidateResponse("NO")
outgoingXMLData += BuildResponse.buildFooter()
return outgoingXMLData
# End of ExecuteWebView.py
def setProgram(program): blinkm = BlinkM() blinkm.reset() blinkm.go_to_hex(OFF) # Some programs mix colors with the previously selected ones. We don't like that. blinkm.play_script(program) blinkm = None
def setLight(hexColor): blinkm = BlinkM() blinkm.reset() blinkm.go_to_hex(hexColor) blinkm = None
