def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.cmbUnitsPhi = QComboBox(self)
units = ["rad", "rad/pi", "deg"]
scales = [1., 1. / np.pi, 180. / np.pi]
for unit, scale in zip(units, scales):
self.cmbUnitsPhi.addItem(unit, scale)
self.cmbUnitsPhi.setObjectName("cmbUnitsA")
self.cmbUnitsPhi.setToolTip("Set unit for phase.")
self.cmbUnitsPhi.setCurrentIndex(0)
self.cmbUnitsPhi.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.chkWrap = QCheckBox("Wrapped Phase", self)
self.chkWrap.setChecked(False)
self.chkWrap.setToolTip("Plot phase wrapped to +/- pi")
layHControls = QHBoxLayout()
layHControls.addWidget(self.cmbUnitsPhi)
layHControls.addWidget(self.chkWrap)
layHControls.addStretch(10)
#----------------------------------------------------------------------
# ### frmControls ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
#----------------------------------------------------------------------
# ### mplwidget ###
#
# main widget, encompassing the other widgets
#----------------------------------------------------------------------
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # initial drawing
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.chkWrap.clicked.connect(self.draw)
self.cmbUnitsPhi.currentIndexChanged.connect(self.unit_changed)
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
def construct_UI(self):
"""
Create additional subwidget(s) needed for filter design:
These subwidgets are instantiated dynamically when needed in
select_filter.py using the handle to the filter instance, fb.fil_inst.
"""
self.lbl_delays = QLabel("<b><i>M =</ i></ b>", self)
self.lbl_delays.setObjectName('wdg_lbl_ma_0')
self.led_delays = QLineEdit(self)
try:
self.led_delays.setText(str(fb.fil[0]['N']))
except KeyError:
self.led_delays.setText(str(self.delays))
self.led_delays.setObjectName('wdg_led_ma_0')
self.led_delays.setToolTip("Set number of delays per stage")
self.lbl_stages = QLabel("<b>Stages =</ b>", self)
self.lbl_stages.setObjectName('wdg_lbl_ma_1')
self.led_stages = QLineEdit(self)
self.led_stages.setText(str(self.stages))
self.led_stages.setObjectName('wdg_led_ma_1')
self.led_stages.setToolTip("Set number of stages ")
self.chk_norm = QCheckBox("Normalize", self)
self.chk_norm.setChecked(True)
self.chk_norm.setObjectName('wdg_chk_ma_2')
self.chk_norm.setToolTip("Normalize to| H_max = 1|")
self.layHWin = QHBoxLayout()
self.layHWin.setObjectName('wdg_layGWin')
self.layHWin.addWidget(self.lbl_delays)
self.layHWin.addWidget(self.led_delays)
self.layHWin.addStretch(1)
self.layHWin.addWidget(self.lbl_stages)
self.layHWin.addWidget(self.led_stages)
self.layHWin.addStretch(1)
self.layHWin.addWidget(self.chk_norm)
self.layHWin.setContentsMargins(0, 0, 0, 0)
# Widget containing all subwidgets (cmbBoxes, Labels, lineEdits)
self.wdg_fil = QWidget(self)
self.wdg_fil.setObjectName('wdg_fil')
self.wdg_fil.setLayout(self.layHWin)
#----------------------------------------------------------------------
# SIGNALS & SLOTs
#----------------------------------------------------------------------
self.led_delays.editingFinished.connect(self._update_UI)
self.led_stages.editingFinished.connect(self._update_UI)
# fires when edited line looses focus or when RETURN is pressed
self.chk_norm.clicked.connect(self._update_UI)
#----------------------------------------------------------------------
self._load_dict() # get initial / last setting from dictionary
self._update_UI()
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.chkWarnings = QCheckBox(self.tr("Verbose"), self)
self.chkWarnings.setChecked(self.verbose)
self.chkWarnings.setToolTip(
self.
tr("<span>Print messages about singular group delay and calculation times."
"</span>"))
self.cmbAlgorithm = QComboBox(self)
qcmb_box_populate(self.cmbAlgorithm, self.cmb_algorithm_items,
self.algorithm)
layHControls = QHBoxLayout()
layHControls.addStretch(10)
layHControls.addWidget(self.chkWarnings)
# layHControls.addWidget(self.chkScipy)
layHControls.addWidget(self.cmbAlgorithm)
# This widget encompasses all control subwidgets:
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['mpl_margins'])
self.mplwidget.mplToolbar.a_he.setEnabled(True)
self.mplwidget.mplToolbar.a_he.info = "manual/plot_tau_g.html"
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # initial drawing of tau_g
# ----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
# ----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
# ----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
# ----------------------------------------------------------------------
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
self.cmbAlgorithm.currentIndexChanged.connect(self.draw)
def construct_UI(self):
"""
Create additional subwidget(s) needed for filter design:
These subwidgets are instantiated dynamically when needed in
select_filter.py using the handle to the filter instance, fb.fil_inst.
"""
self.chkComplex = QCheckBox("ComplexFilter", self)
self.chkComplex.setToolTip("Designs BP or BS Filter for complex data.")
self.chkComplex.setObjectName('wdg_lbl_el')
self.chkComplex.setChecked(False)
#--------------------------------------------------
# Layout for filter optional subwidgets
self.layHWin = QHBoxLayout()
self.layHWin.setObjectName('wdg_layGWin')
#self.layHWin.addWidget(self.chkComplex)
self.layHWin.addStretch()
self.layHWin.setContentsMargins(0,0,0,0)
# Widget containing all subwidgets
self.wdg_fil = QWidget(self)
self.wdg_fil.setObjectName('wdg_fil')
self.wdg_fil.setLayout(self.layHWin)
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.chkHf = QCheckBox("Show |H(f)|", self)
self.chkHf.setToolTip(
"<span>Display |H(f)| around unit circle.</span>")
self.chkHf.setEnabled(True)
self.chkHfLog = QCheckBox("Log. Scale", self)
self.chkHfLog.setToolTip("<span>Log. scale for |H(f)|.</span>")
self.chkHfLog.setEnabled(True)
self.diaRad_Hf = QDial(self)
self.diaRad_Hf.setRange(2., 10.)
self.diaRad_Hf.setValue(2)
self.diaRad_Hf.setTracking(False) # produce less events when turning
self.diaRad_Hf.setFixedHeight(30)
self.diaRad_Hf.setFixedWidth(30)
self.diaRad_Hf.setWrapping(False)
self.diaRad_Hf.setToolTip(
"<span>Set max. radius for |H(f)| plot.</span>")
self.lblRad_Hf = QLabel("Radius", self)
self.chkFIR_P = QCheckBox("Plot FIR Poles", self)
self.chkFIR_P.setToolTip("<span>Show FIR poles at the origin.</span>")
self.chkFIR_P.setChecked(True)
layHControls = QHBoxLayout()
layHControls.addWidget(self.chkHf)
layHControls.addWidget(self.chkHfLog)
layHControls.addWidget(self.diaRad_Hf)
layHControls.addWidget(self.lblRad_Hf)
layHControls.addStretch(10)
layHControls.addWidget(self.chkFIR_P)
#----------------------------------------------------------------------
# ### frmControls ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
#----------------------------------------------------------------------
# ### mplwidget ###
#
# main widget, encompassing the other widgets
#----------------------------------------------------------------------
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # calculate and draw poles and zeros
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
self.chkHf.clicked.connect(self.draw)
self.chkHfLog.clicked.connect(self.draw)
self.diaRad_Hf.valueChanged.connect(self.draw)
self.chkFIR_P.clicked.connect(self.draw)
class Plot_PZ(QWidget):
# incoming, connected in sender widget (locally connected to self.process_sig_rx() )
sig_rx = pyqtSignal(object)
def __init__(self, parent):
super(Plot_PZ, self).__init__(parent)
self.needs_calc = True # flag whether filter data has been changed
self.needs_draw = False # flag whether whether figure needs to be drawn
# with new limits etc. (not implemented yet)
self.tool_tip = "Pole / zero plan"
self.tab_label = "P / Z"
self._construct_UI()
#------------------------------------------------------------------------------
def process_sig_rx(self, dict_sig=None):
"""
Process signals coming from the navigation toolbar and from sig_rx
"""
logger.debug("Processing {0} | needs_draw = {1}, visible = {2}"\
.format(dict_sig, self.needs_calc, self.isVisible()))
if self.isVisible():
if 'data_changed' in dict_sig or 'home' in dict_sig or self.needs_calc:
self.draw()
self.needs_calc = False
self.needs_draw = False
if 'view_changed' in dict_sig or self.needs_draw:
self.update_view()
self.needs_draw = False
else:
if 'data_changed' in dict_sig:
self.needs_calc = True
if 'view_changed' in dict_sig:
self.needs_draw = True
#------------------------------------------------------------------------------
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.chkHf = QCheckBox("Show |H(f)|", self)
self.chkHf.setToolTip(
"<span>Display |H(f)| around unit circle.</span>")
self.chkHf.setEnabled(True)
self.chkHfLog = QCheckBox("Log. Scale", self)
self.chkHfLog.setToolTip("<span>Log. scale for |H(f)|.</span>")
self.chkHfLog.setEnabled(True)
self.diaRad_Hf = QDial(self)
self.diaRad_Hf.setRange(2., 10.)
self.diaRad_Hf.setValue(2)
self.diaRad_Hf.setTracking(False) # produce less events when turning
self.diaRad_Hf.setFixedHeight(30)
self.diaRad_Hf.setFixedWidth(30)
self.diaRad_Hf.setWrapping(False)
self.diaRad_Hf.setToolTip(
"<span>Set max. radius for |H(f)| plot.</span>")
self.lblRad_Hf = QLabel("Radius", self)
self.chkFIR_P = QCheckBox("Plot FIR Poles", self)
self.chkFIR_P.setToolTip("<span>Show FIR poles at the origin.</span>")
self.chkFIR_P.setChecked(True)
layHControls = QHBoxLayout()
layHControls.addWidget(self.chkHf)
layHControls.addWidget(self.chkHfLog)
layHControls.addWidget(self.diaRad_Hf)
layHControls.addWidget(self.lblRad_Hf)
layHControls.addStretch(10)
layHControls.addWidget(self.chkFIR_P)
#----------------------------------------------------------------------
# ### frmControls ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
#----------------------------------------------------------------------
# ### mplwidget ###
#
# main widget, encompassing the other widgets
#----------------------------------------------------------------------
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # calculate and draw poles and zeros
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
self.chkHf.clicked.connect(self.draw)
self.chkHfLog.clicked.connect(self.draw)
self.diaRad_Hf.valueChanged.connect(self.draw)
self.chkFIR_P.clicked.connect(self.draw)
#------------------------------------------------------------------------------
def init_axes(self):
"""
Initialize and clear the axes (this is only run once)
"""
if len(self.mplwidget.fig.get_axes()) == 0: # empty figure, no axes
self.ax = self.mplwidget.fig.subplots() #.add_subplot(111)
self.ax.get_xaxis().tick_bottom() # remove axis ticks on top
self.ax.get_yaxis().tick_left() # remove axis ticks right
#------------------------------------------------------------------------------
def update_view(self):
"""
Draw the figure with new limits, scale etcs without recalculating H(f)
-- not yet implemented, just use draw() for the moment
"""
self.draw()
#------------------------------------------------------------------------------
def draw(self):
self.chkFIR_P.setVisible(fb.fil[0]['ft'] == 'FIR')
self.draw_pz()
#------------------------------------------------------------------------------
def draw_pz(self):
"""
(re)draw P/Z plot
"""
p_marker = params['P_Marker']
z_marker = params['Z_Marker']
zpk = fb.fil[0]['zpk']
# add antiCausals if they exist (must take reciprocal to plot)
if 'rpk' in fb.fil[0]:
zA = fb.fil[0]['zpk'][0]
zA = np.conj(1. / zA)
pA = fb.fil[0]['zpk'][1]
pA = np.conj(1. / pA)
zC = np.append(zpk[0], zA)
pC = np.append(zpk[1], pA)
zpk[0] = zC
zpk[1] = pC
self.ax.clear()
[z, p, k] = self.zplane(z=zpk[0],
p=zpk[1],
k=zpk[2],
plt_ax=self.ax,
plt_poles=self.chkFIR_P.isChecked()
or fb.fil[0]['ft'] == 'IIR',
mps=p_marker[0],
mpc=p_marker[1],
mzs=z_marker[0],
mzc=z_marker[1])
self.ax.set_title(r'Pole / Zero Plot')
self.ax.set_xlabel('Real axis')
self.ax.set_ylabel('Imaginary axis')
self.draw_Hf(r=self.diaRad_Hf.value())
self.redraw()
#------------------------------------------------------------------------------
def redraw(self):
"""
Redraw the canvas when e.g. the canvas size has changed
"""
self.mplwidget.redraw()
#------------------------------------------------------------------------------
def zplane(self,
b=None,
a=1,
z=None,
p=None,
k=1,
pn_eps=1e-3,
analog=False,
plt_ax=None,
plt_poles=True,
style='square',
anaCircleRad=0,
lw=2,
mps=10,
mzs=10,
mpc='r',
mzc='b',
plabel='',
zlabel=''):
"""
Plot the poles and zeros in the complex z-plane either from the
coefficients (`b,`a) of a discrete transfer function `H`(`z`) (zpk = False)
or directly from the zeros and poles (z,p) (zpk = True).
When only b is given, an FIR filter with all poles at the origin is assumed.
Parameters
----------
b : array_like
Numerator coefficients (transversal part of filter)
When b is not None, poles and zeros are determined from the coefficients
b and a
a : array_like (optional, default = 1 for FIR-filter)
Denominator coefficients (recursive part of filter)
z : array_like, default = None
Zeros
When b is None, poles and zeros are taken directly from z and p
p : array_like, default = None
Poles
analog : boolean (default: False)
When True, create a P/Z plot suitable for the s-plane, i.e. suppress
the unit circle (unless anaCircleRad > 0) and scale the plot for
a good display of all poles and zeros.
pn_eps : float (default : 1e-2)
Tolerance for separating close poles or zeros
plt_ax : handle to axes for plotting (default: None)
When no axes is specified, the current axes is determined via plt.gca()
plt_poles : Boolean (default : True)
Plot poles. This can be used to suppress poles for FIR systems
where all poles are at the origin.
style : string (default: 'square')
Style of the plot, for style == 'square' make scale of x- and y-
axis equal.
mps : integer (default: 10)
Size for pole marker
mzs : integer (default: 10)
Size for zero marker
mpc : char (default: 'r')
Pole marker colour
mzc : char (default: 'b')
Zero marker colour
lw : integer (default: 2)
Linewidth for unit circle
plabel, zlabel : string (default: '')
This string is passed to the plot command for poles and zeros and
can be displayed by legend()
Returns
-------
z, p, k : ndarray
Notes
-----
"""
# TODO:
# - polar option
# - add keywords for color of circle -> **kwargs
# - add option for multi-dimensional arrays and zpk data
# make sure that all inputs are arrays
b = np.atleast_1d(b)
a = np.atleast_1d(a)
z = np.atleast_1d(z) # make sure that p, z are arrays
p = np.atleast_1d(p)
if b.any(): # coefficients were specified
if len(b) < 2 and len(a) < 2:
logger.error(
'No proper filter coefficients: both b and a are scalars!')
return z, p, k
# The coefficients are less than 1, normalize the coefficients
if np.max(b) > 1:
kn = np.max(b)
b = b / float(kn)
else:
kn = 1.
if np.max(a) > 1:
kd = np.max(a)
a = a / abs(kd)
else:
kd = 1.
# Calculate the poles, zeros and scaling factor
p = np.roots(a)
z = np.roots(b)
k = kn / kd
elif not (len(p) or len(z)): # P/Z were specified
logger.error('Either b,a or z,p must be specified!')
return z, p, k
# find multiple poles and zeros and their multiplicities
if len(p) < 2: # single pole, [None] or [0]
if not p or p == 0: # only zeros, create equal number of poles at origin
p = np.array(0, ndmin=1) #
num_p = np.atleast_1d(len(z))
else:
num_p = [1.] # single pole != 0
else:
#p, num_p = sig.signaltools.unique_roots(p, tol = pn_eps, rtype='avg')
p, num_p = unique_roots(p, tol=pn_eps, rtype='avg')
# p = np.array(p); num_p = np.ones(len(p))
if len(z) > 0:
z, num_z = unique_roots(z, tol=pn_eps, rtype='avg')
# z = np.array(z); num_z = np.ones(len(z))
#z, num_z = sig.signaltools.unique_roots(z, tol = pn_eps, rtype='avg')
else:
num_z = []
ax = plt_ax #.subplot(111)
if analog == False:
# create the unit circle for the z-plane
uc = patches.Circle((0, 0),
radius=1,
fill=False,
color='grey',
ls='solid',
zorder=1)
ax.add_patch(uc)
if style == 'square':
#r = 1.1
#ax.axis([-r, r, -r, r]) # overridden by next option
ax.axis('equal')
# ax.spines['left'].set_position('center')
# ax.spines['bottom'].set_position('center')
# ax.spines['right'].set_visible(True)
# ax.spines['top'].set_visible(True)
else: # s-plane
if anaCircleRad > 0:
# plot a circle with radius = anaCircleRad
uc = patches.Circle((0, 0),
radius=anaCircleRad,
fill=False,
color='grey',
ls='solid',
zorder=1)
ax.add_patch(uc)
# plot real and imaginary axis
ax.axhline(lw=2, color='k', zorder=1)
ax.axvline(lw=2, color='k', zorder=1)
# Plot the zeros
ax.scatter(z.real,
z.imag,
s=mzs * mzs,
zorder=2,
marker='o',
facecolor='none',
edgecolor=mzc,
lw=lw,
label=zlabel)
# and print their multiplicity
for i in range(len(z)):
logger.debug('z: {0} | {1} | {2}'.format(i, z[i], num_z[i]))
if num_z[i] > 1:
ax.text(np.real(z[i]),
np.imag(z[i]),
' (' + str(num_z[i]) + ')',
va='top',
color=mzc)
if plt_poles:
# Plot the poles
ax.scatter(p.real,
p.imag,
s=mps * mps,
zorder=2,
marker='x',
color=mpc,
lw=lw,
label=plabel)
# and print their multiplicity
for i in range(len(p)):
logger.debug('p:{0} | {1} | {2}'.format(i, p[i], num_p[i]))
if num_p[i] > 1:
ax.text(np.real(p[i]),
np.imag(p[i]),
' (' + str(num_p[i]) + ')',
va='bottom',
color=mpc)
# =============================================================================
# # increase distance between ticks and labels
# # to give some room for poles and zeros
# for tick in ax.get_xaxis().get_major_ticks():
# tick.set_pad(12.)
# tick.label1 = tick._get_text1()
# for tick in ax.get_yaxis().get_major_ticks():
# tick.set_pad(12.)
# tick.label1 = tick._get_text1()
#
# =============================================================================
xl = ax.get_xlim()
Dx = max(abs(xl[1] - xl[0]), 0.05)
yl = ax.get_ylim()
Dy = max(abs(yl[1] - yl[0]), 0.05)
ax.set_xlim((xl[0] - Dx * 0.05, max(xl[1] + Dx * 0.05, 0)))
ax.set_ylim((yl[0] - Dy * 0.05, yl[1] + Dy * 0.05))
return z, p, k
#------------------------------------------------------------------------------
def draw_Hf(self, r=2):
"""
Draw the magnitude frequency response around the UC
"""
# suppress "divide by zero in log10" warnings
old_settings_seterr = np.seterr()
np.seterr(divide='ignore')
self.chkHfLog.setVisible(self.chkHf.isChecked())
self.diaRad_Hf.setVisible(self.chkHf.isChecked())
self.lblRad_Hf.setVisible(self.chkHf.isChecked())
if not self.chkHf.isChecked():
return
ba = fb.fil[0]['ba']
w, H = sig.freqz(ba[0], ba[1], worN=params['N_FFT'], whole=True)
H = np.abs(H)
if self.chkHfLog.isChecked():
H = np.clip(np.log10(H), -6, None) # clip to -120 dB
H = H - np.max(H) # shift scale to H_min ... 0
H = 1 + (r - 1) * (1 + H / abs(np.min(H))) # scale to 1 ... r
else:
H = 1 + (r - 1) * H / np.max(H) # map |H(f)| to a range 1 ... r
y = H * np.sin(w)
x = H * np.cos(w)
self.ax.plot(x, y, label="|H(f)|")
uc = patches.Circle((0, 0),
radius=r,
fill=False,
color='grey',
ls='dashed',
zorder=1)
self.ax.add_patch(uc)
xl = self.ax.get_xlim()
xmax = max(abs(xl[0]), abs(xl[1]), r * 1.05)
yl = self.ax.get_ylim()
ymax = max(abs(yl[0]), abs(yl[1]), r * 1.05)
self.ax.set_xlim((-xmax, xmax))
self.ax.set_ylim((-ymax, ymax))
np.seterr(**old_settings_seterr)
class EllipZeroPhz(QWidget):
# Since we are also using poles/residues -> let's force zpk
# if SOS_AVAIL:
# output format of filter design routines 'zpk' / 'ba' / 'sos'
# FRMT = 'sos'
# else:
FRMT = 'zpk'
info = """
**Elliptic filters with zero phase**
(also known as Cauer filters) have the steepest rate of transition between the
frequency response’s passband and stopband of all IIR filters. This comes
at the expense of a constant ripple (equiripple) :math:`A_PB` and :math:`A_SB`
in both pass and stop band. Ringing of the step response is increased in
comparison to Chebychev filters.
As the passband ripple :math:`A_PB` approaches 0, the elliptical filter becomes
a Chebyshev type II filter. As the stopband ripple :math:`A_SB` approaches 0,
it becomes a Chebyshev type I filter. As both approach 0, becomes a Butterworth
filter (butter).
For the filter design, the order :math:`N`, minimum stopband attenuation
:math:`A_SB` and the critical frequency / frequencies :math:`F_PB` where the
gain first drops below the maximum passband ripple :math:`-A_PB` have to be specified.
The ``ellipord()`` helper routine calculates the minimum order :math:`N` and
critical passband frequency :math:`F_C` from pass and stop band specifications.
The Zero Phase Elliptic Filter squares an elliptic filter designed in
a way to produce the required Amplitude specifications. So initially the
amplitude specs design an elliptic filter with the square root of the amp specs.
The filter is then squared to produce a zero phase filter.
The filter coefficients are applied to the signal data in a backward and forward
time fashion. This filter can only be applied to stored signal data (not
real-time streaming data that comes in a forward time order).
We are forcing the order N of the filter to be even. This simplifies the poles/zeros
to be complex (no real values).
**Design routines:**
``scipy.signal.ellip()``, ``scipy.signal.ellipord()``
"""
sig_tx = pyqtSignal(object)
def __init__(self):
QWidget.__init__(self)
self.ft = 'IIR'
c = Common()
self.rt_dict = c.rt_base_iir
self.rt_dict_add = {
'COM':{'man':{'msg':('a',
"Enter the filter order <b><i>N</i></b>, the minimum stop "
"band attenuation <b><i>A<sub>SB</sub></i></b> and frequency or "
"frequencies <b><i>F<sub>C</sub></i></b> where gain first drops "
"below the max passband ripple <b><i>-A<sub>PB</sub></i></b> .")}},
'LP': {'man':{}, 'min':{}},
'HP': {'man':{}, 'min':{}},
'BS': {'man':{}, 'min':{}},
'BP': {'man':{}, 'min':{}},
}
self.info_doc = []
self.info_doc.append('ellip()\n========')
self.info_doc.append(sig.ellip.__doc__)
self.info_doc.append('ellipord()\n==========')
self.info_doc.append(ellipord.__doc__)
#--------------------------------------------------------------------------
def construct_UI(self):
"""
Create additional subwidget(s) needed for filter design:
These subwidgets are instantiated dynamically when needed in
select_filter.py using the handle to the filter instance, fb.fil_inst.
"""
self.chkComplex = QCheckBox("ComplexFilter", self)
self.chkComplex.setToolTip("Designs BP or BS Filter for complex data.")
self.chkComplex.setObjectName('wdg_lbl_el')
self.chkComplex.setChecked(False)
#--------------------------------------------------
# Layout for filter optional subwidgets
self.layHWin = QHBoxLayout()
self.layHWin.setObjectName('wdg_layGWin')
#self.layHWin.addWidget(self.chkComplex)
self.layHWin.addStretch()
self.layHWin.setContentsMargins(0,0,0,0)
# Widget containing all subwidgets
self.wdg_fil = QWidget(self)
self.wdg_fil.setObjectName('wdg_fil')
self.wdg_fil.setLayout(self.layHWin)
def _get_params(self, fil_dict):
"""
Translate parameters from the passed dictionary to instance
parameters, scaling / transforming them if needed.
For zero phase filter, we take square root of amplitude specs
since we later square filter. Define design around smallest amp spec
"""
# Frequencies are normalized to f_Nyq = f_S/2, ripple specs are in dB
self.analog = False # set to True for analog filters
self.manual = False # default is normal design
self.N = int(fil_dict['N'])
# force N to be even
if (self.N % 2) == 1:
self.N += 1
self.F_PB = fil_dict['F_PB'] * 2
self.F_SB = fil_dict['F_SB'] * 2
self.F_PB2 = fil_dict['F_PB2'] * 2
self.F_SB2 = fil_dict['F_SB2'] * 2
self.F_PBC = None
# find smallest spec'd linear value and rewrite dictionary
ampPB = fil_dict['A_PB']
ampSB = fil_dict['A_SB']
# take square roots of amp specs so resulting squared
# filter will meet specifications
if (ampPB < ampSB):
ampSB = sqrt(ampPB)
ampPB = sqrt(1+ampPB)-1
else:
ampPB = sqrt(1+ampSB)-1
ampSB = sqrt(ampSB)
self.A_PB = lin2unit(ampPB, 'IIR', 'A_PB', unit='dB')
self.A_SB = lin2unit(ampSB, 'IIR', 'A_SB', unit='dB')
#logger.warning("design with "+str(self.A_PB)+","+str(self.A_SB))
# ellip filter routines support only one amplitude spec for
# pass- and stop band each
if str(fil_dict['rt']) == 'BS':
fil_dict['A_PB2'] = self.A_PB
elif str(fil_dict['rt']) == 'BP':
fil_dict['A_SB2'] = self.A_SB
# partial fraction expansion to define residue vector
def _partial(self, k, p, z, norder):
# create diff array
diff = p - z
# now compute residual vector
cone = complex(1.,0.)
residues = zeros(norder, complex)
for i in range(norder):
residues[i] = k * (diff[i] / p[i])
for j in range(norder):
if (j != i):
residues[i] = residues[i] * (cone + diff[j]/(p[i] - p[j]))
# now compute DC term for new expansion
sumRes = 0.
for i in range(norder):
sumRes = sumRes + residues[i].real
dc = k - sumRes
return (dc, residues)
#
# Take a causal filter and square it. The result has the square
# of the amplitude response of the input, and zero phase. Filter
# is noncausal.
# Input:
# k - gain in pole/zero form
# p - numpy array of poles
# z - numpy array of zeros
# g - gain in pole/residue form
# r - numpy array of residues
# nn- order of filter
# Output:
# kn - new gain (pole/zero)
# pn - new poles
# zn - new zeros (numpy array)
# gn - new gain (pole/residue)
# rn - new residues
def _sqCausal (self, k, p, z, g, r, nn):
# Anticausal poles have conjugate-reciprocal symmetry
# Starting anticausal residues are conjugates (adjusted below)
pA = conj(1./p) # antiCausal poles
zA = conj(z) # antiCausal zeros (store reciprocal)
rA = conj(r) # antiCausal residues (to start)
rC = zeros(nn, complex)
# Adjust residues. Causal part first.
for j in range(nn):
# Evaluate the anticausal filter at each causal pole
tmpx = rA / (1. - p[j]/pA)
ztmp = g + sum(tmpx)
# Adjust residue
rC[j] = r[j]*ztmp
# anticausal residues are just conjugates of causal residues
# r3 = np.conj(r2)
# Compute the constant term
dc2 = (g + sum(r))*g - sum(rC)
# Populate output (2nn elements)
gn = dc2.real
# Drop complex poles/residues in LHP, keep only UHP
pA = conj(p) #store AntiCasual pole (reciprocal)
p0 = zeros(int(nn/2), complex)
r0 = zeros(int(nn/2), complex)
cnt = 0
for j in range(nn):
if (p[j].imag > 0.0):
p0[cnt] = p[j]
r0[cnt] = rC[j]
cnt = cnt+1
# Let operator know we squared filter
# logger.info('After squaring filter, order: '+str(nn*2))
# For now and our case, only store causal residues
# Filters are symmetric and can generate antiCausal residues
return (pA, zA, gn, p0, r0)
def _test_N(self):
"""
Warn the user if the calculated order is too high for a reasonable filter
design.
"""
if self.N > 30:
return qfilter_warning(self, self.N, "Zero-phase Elliptic")
else:
return True
# custom save of filter dictionary
def _save(self, fil_dict, arg):
"""
First design initial elliptic filter meeting sqRoot Amp specs;
- Then create residue vector from poles/zeros;
- Then square filter (k,p,z and dc,p,r) to get zero phase filter;
- Then Convert results of filter design to all available formats (pz, pr, ba, sos)
and store them in the global filter dictionary.
Corner frequencies and order calculated for minimum filter order are
also stored to allow for an easy subsequent manual filter optimization.
"""
fil_save(fil_dict, arg, self.FRMT, __name__)
# For min. filter order algorithms, update filter dict with calculated
# new values for filter order N and corner frequency(s) F_PBC
fil_dict['N'] = self.N
if str(fil_dict['fo']) == 'min':
if str(fil_dict['rt']) == 'LP' or str(fil_dict['rt']) == 'HP':
# HP or LP - single corner frequency
fil_dict['F_PB'] = self.F_PBC / 2.
else: # BP or BS - two corner frequencies
fil_dict['F_PB'] = self.F_PBC[0] / 2.
fil_dict['F_PB2'] = self.F_PBC[1] / 2.
# Now generate poles/residues for custom file save of new parameters
if (not self.manual):
z = fil_dict['zpk'][0]
p = fil_dict['zpk'][1]
k = fil_dict['zpk'][2]
n = len(z)
gain, residues = self._partial (k, p, z, n)
pA, zA, gn, pC, rC = self._sqCausal (k, p, z, gain, residues, n)
fil_dict['rpk'] = [rC, pC, gn]
# save antiCausal b,a (nonReciprocal) also [easier to compute h(n)
try:
fil_dict['baA'] = sig.zpk2tf(zA, pA, k)
except Exception as e:
logger.error(e)
# 'rpk' is our signal that this is a non-Causal filter with zero phase
# inserted into fil dictionary after fil_save and convert
# sig_tx -> select_filter -> filter_specs
self.sig_tx.emit({'sender':__name__, 'filt_changed':'ellip_zero'})
#------------------------------------------------------------------------------
#
# DESIGN ROUTINES
#
#------------------------------------------------------------------------------
# LP: F_PB < F_stop -------------------------------------------------------
def LPmin(self, fil_dict):
"""Elliptic LP filter, minimum order"""
self._get_params(fil_dict)
self.N, self.F_PBC = ellipord(self.F_PB,self.F_SB, self.A_PB,self.A_SB, analog=self.analog)
# force even N
if (self.N%2)== 1:
self.N += 1
if not self._test_N():
return -1
#logger.warning("and "+str(self.F_PBC) + " " + str(self.N))
self._save(fil_dict, sig.ellip(self.N, self.A_PB, self.A_SB, self.F_PBC,
btype='low', analog=self.analog, output=self.FRMT))
def LPman(self, fil_dict):
"""Elliptic LP filter, manual order"""
self._get_params(fil_dict)
if not self._test_N():
return -1
self._save(fil_dict, sig.ellip(self.N, self.A_PB, self.A_SB, self.F_PB,
btype='low', analog=self.analog, output=self.FRMT))
# HP: F_stop < F_PB -------------------------------------------------------
def HPmin(self, fil_dict):
"""Elliptic HP filter, minimum order"""
self._get_params(fil_dict)
self.N, self.F_PBC = ellipord(self.F_PB,self.F_SB, self.A_PB,self.A_SB,
analog=self.analog)
# force even N
if (self.N%2)== 1:
self.N += 1
if not self._test_N():
return -1
self._save(fil_dict, sig.ellip(self.N, self.A_PB, self.A_SB, self.F_PBC,
btype='highpass', analog=self.analog, output=self.FRMT))
def HPman(self, fil_dict):
"""Elliptic HP filter, manual order"""
self._get_params(fil_dict)
if not self._test_N():
return -1
self._save(fil_dict, sig.ellip(self.N, self.A_PB, self.A_SB, self.F_PB,
btype='highpass', analog=self.analog, output=self.FRMT))
# For BP and BS, F_XX have two elements each, A_XX has only one
# BP: F_SB[0] < F_PB[0], F_SB[1] > F_PB[1] --------------------------------
def BPmin(self, fil_dict):
"""Elliptic BP filter, minimum order"""
self._get_params(fil_dict)
self.N, self.F_PBC = ellipord([self.F_PB, self.F_PB2],
[self.F_SB, self.F_SB2], self.A_PB, self.A_SB, analog=self.analog)
#logger.warning(" "+str(self.F_PBC) + " " + str(self.N))
if (self.N%2)== 1:
self.N += 1
if not self._test_N():
return -1
#logger.warning("-"+str(self.F_PBC) + " " + str(self.A_SB))
self._save(fil_dict, sig.ellip(self.N, self.A_PB, self.A_SB, self.F_PBC,
btype='bandpass', analog=self.analog, output=self.FRMT))
def BPman(self, fil_dict):
"""Elliptic BP filter, manual order"""
self._get_params(fil_dict)
if not self._test_N():
return -1
self._save(fil_dict, sig.ellip(self.N, self.A_PB, self.A_SB,
[self.F_PB,self.F_PB2], btype='bandpass', analog=self.analog,
output=self.FRMT))
# BS: F_SB[0] > F_PB[0], F_SB[1] < F_PB[1] --------------------------------
def BSmin(self, fil_dict):
"""Elliptic BP filter, minimum order"""
self._get_params(fil_dict)
self.N, self.F_PBC = ellipord([self.F_PB, self.F_PB2],
[self.F_SB, self.F_SB2], self.A_PB,self.A_SB, analog=self.analog)
# force even N
if (self.N%2)== 1:
self.N += 1
if not self._test_N():
return -1
self._save(fil_dict, sig.ellip(self.N, self.A_PB, self.A_SB, self.F_PBC,
btype='bandstop', analog=self.analog, output=self.FRMT))
def BSman(self, fil_dict):
"""Elliptic BS filter, manual order"""
self._get_params(fil_dict)
if not self._test_N():
return -1
self._save(fil_dict, sig.ellip(self.N, self.A_PB, self.A_SB,
[self.F_PB,self.F_PB2], btype='bandstop', analog=self.analog,
output=self.FRMT))
class Plot_tau_g(QWidget):
"""
Widget for plotting the group delay
"""
# incoming, connected in sender widget (locally connected to self.process_signals() )
sig_rx = pyqtSignal(object)
# sig_tx = pyqtSignal(object) # outgoing from process_signals
def __init__(self):
super().__init__()
self.verbose = False # suppress warnings
self.algorithm = "auto"
self.needs_calc = True # flag whether plot needs to be recalculated
self.tool_tip = self.tr("Group delay")
self.tab_label = "\U0001D70F(f)" # "tau_g" \u03C4
self.cmb_algorithm_items =\
["<span>Select algorithm for calculating the group delay.</span>",
("auto", "Auto", "<span>Try to find best-suited algorithm.</span>"),
("scipy", "Scipy", "<span>Scipy algorithm.</span>"),
("jos", "JOS", "<span>J.O. Smith's algorithm.</span>"),
("shpak", "Shpak", "<span>Shpak's algorithm for SOS and other IIR"
"filters.</span>"),
("diff", "Diff", "<span>Textbook-style, differentiate the phase."
"</span>")
]
self._construct_UI()
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.chkWarnings = QCheckBox(self.tr("Verbose"), self)
self.chkWarnings.setChecked(self.verbose)
self.chkWarnings.setToolTip(
self.
tr("<span>Print messages about singular group delay and calculation times."
"</span>"))
self.cmbAlgorithm = QComboBox(self)
qcmb_box_populate(self.cmbAlgorithm, self.cmb_algorithm_items,
self.algorithm)
layHControls = QHBoxLayout()
layHControls.addStretch(10)
layHControls.addWidget(self.chkWarnings)
# layHControls.addWidget(self.chkScipy)
layHControls.addWidget(self.cmbAlgorithm)
# This widget encompasses all control subwidgets:
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['mpl_margins'])
self.mplwidget.mplToolbar.a_he.setEnabled(True)
self.mplwidget.mplToolbar.a_he.info = "manual/plot_tau_g.html"
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # initial drawing of tau_g
# ----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
# ----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
# ----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
# ----------------------------------------------------------------------
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
self.cmbAlgorithm.currentIndexChanged.connect(self.draw)
# ------------------------------------------------------------------------------
def process_sig_rx(self, dict_sig=None):
"""
Process signals coming from the navigation toolbar and from sig_rx
"""
# logger.debug("Processing {0} | needs_calc = {1}, visible = {2}"
# .format(dict_sig, self.needs_calc, self.isVisible()))
if self.isVisible():
if 'data_changed' in dict_sig or 'home' in dict_sig or self.needs_calc:
self.draw()
self.needs_calc = False
elif 'view_changed' in dict_sig:
self.update_view()
else:
if 'data_changed' in dict_sig or 'view_changed' in dict_sig:
self.needs_calc = True
# ------------------------------------------------------------------------------
def init_axes(self):
"""
Initialize the axes and set some stuff that is not cleared by
`ax.clear()` later on.
"""
self.ax = self.mplwidget.fig.subplots()
self.ax.xaxis.tick_bottom() # remove axis ticks on top
self.ax.yaxis.tick_left() # remove axis ticks right
# ------------------------------------------------------------------------------
def calc_tau_g(self):
"""
(Re-)Calculate the complex frequency response H(f)
"""
bb = fb.fil[0]['ba'][0]
aa = fb.fil[0]['ba'][1]
# calculate H_cmplx(W) (complex) for W = 0 ... 2 pi:
# scipy: self.W, self.tau_g = group_delay((bb, aa), w=params['N_FFT'],
# whole = True)
if fb.fil[0]['creator'][0] == 'sos': # one of 'sos', 'zpk', 'ba'
self.W, self.tau_g = group_delay(
fb.fil[0]['sos'],
nfft=params['N_FFT'],
sos=True,
whole=True,
verbose=self.chkWarnings.isChecked(),
alg=self.cmbAlgorithm.currentData())
else:
self.W, self.tau_g = group_delay(
bb,
aa,
nfft=params['N_FFT'],
whole=True,
verbose=self.chkWarnings.isChecked(),
alg=self.cmbAlgorithm.currentData())
# self.chkWarnings.isChecked())
# Zero phase filters have no group delay (Causal+AntiCausal)
if 'baA' in fb.fil[0]:
self.tau_g = np.zeros(self.tau_g.size)
# ------------------------------------------------------------------------------
def draw(self):
self.calc_tau_g()
self.update_view()
# ------------------------------------------------------------------------------
def update_view(self):
"""
Draw the figure with new limits, scale etc without recalculating H(f)
"""
# ========= select frequency range to be displayed =====================
# === shift, scale and select: W -> F, H_cplx -> H_c
f_max_2 = fb.fil[0]['f_max'] / 2.
F = self.W * f_max_2 / np.pi
if fb.fil[0]['freqSpecsRangeType'] == 'sym':
# shift tau_g and F by f_S/2
tau_g = np.fft.fftshift(self.tau_g)
F -= f_max_2
elif fb.fil[0]['freqSpecsRangeType'] == 'half':
# only use the first half of H and F
tau_g = self.tau_g[0:params['N_FFT'] // 2]
F = F[0:params['N_FFT'] // 2]
else: # fb.fil[0]['freqSpecsRangeType'] == 'whole'
# use H and F as calculated
tau_g = self.tau_g
# ================ Main Plotting Routine =========================
# === clear the axes and (re)draw the plot
if fb.fil[0]['freq_specs_unit'] in {'f_S', 'f_Ny'}:
tau_str = r'$ \tau_g(\mathrm{e}^{\mathrm{j} \Omega}) / T_S \; \rightarrow $'
else:
tau_str = r'$ \tau_g(\mathrm{e}^{\mathrm{j} \Omega})$'\
+ ' in ' + fb.fil[0]['plt_tUnit'] + r' $ \rightarrow $'
tau_g = tau_g / fb.fil[0]['f_S']
# ---------------------------------------------------------
self.ax.clear() # need to clear, doesn't overwrite
line_tau_g, = self.ax.plot(F, tau_g, label="Group Delay")
# ---------------------------------------------------------
self.ax.xaxis.set_minor_locator(
AutoMinorLocator()) # enable minor ticks
self.ax.yaxis.set_minor_locator(
AutoMinorLocator()) # enable minor ticks
self.ax.set_title(r'Group Delay $ \tau_g$')
self.ax.set_xlabel(fb.fil[0]['plt_fLabel'])
self.ax.set_ylabel(tau_str)
# widen y-limits to suppress numerical inaccuracies when tau_g = constant
self.ax.set_ylim(
[max(np.nanmin(tau_g) - 0.5, 0),
np.nanmax(tau_g) + 0.5])
self.ax.set_xlim(fb.fil[0]['freqSpecsRange'])
self.redraw()
# ------------------------------------------------------------------------------
def redraw(self):
"""
Redraw the canvas when e.g. the canvas size has changed
"""
self.mplwidget.redraw()
def _construct_UI(self):
self.chkLog = QCheckBox("Log.", self)
self.chkLog.setObjectName("chkLog")
self.chkLog.setToolTip("Logarithmic scale")
self.chkLog.setChecked(False)
self.chk_plot_in_UC = QCheckBox("|z| < 1", self)
self.chk_plot_in_UC.setObjectName("chk_plot_in_UC")
self.chk_plot_in_UC.setToolTip("Only plot H(z) within the unit circle")
self.chk_plot_in_UC.setChecked(False)
self.lblBottom = QLabel("Bottom:", self)
self.ledBottom = QLineEdit(self)
self.ledBottom.setObjectName("ledBottom")
self.ledBottom.setText(str(self.zmin))
self.ledBottom.setToolTip("Minimum display value.")
self.lblBottomdB = QLabel("dB", self)
self.lblBottomdB.setVisible(self.chkLog.isChecked())
self.lblTop = QLabel("Top:", self)
self.ledTop = QLineEdit(self)
self.ledTop.setObjectName("ledTop")
self.ledTop.setText(str(self.zmax))
self.ledTop.setToolTip("Maximum display value.")
self.lblTopdB = QLabel("dB", self)
self.lblTopdB.setVisible(self.chkLog.isChecked())
self.chkUC = QCheckBox("UC", self)
self.chkUC.setObjectName("chkUC")
self.chkUC.setToolTip("Plot unit circle")
self.chkUC.setChecked(True)
self.chkPZ = QCheckBox("P/Z", self)
self.chkPZ.setObjectName("chkPZ")
self.chkPZ.setToolTip("Plot poles and zeros")
self.chkPZ.setChecked(True)
self.chkHf = QCheckBox("H(f)", self)
self.chkHf.setObjectName("chkHf")
self.chkHf.setToolTip("Plot H(f) along the unit circle")
self.chkHf.setChecked(True)
modes = ['None', 'Mesh', 'Surf', 'Contour']
self.cmbMode3D = QComboBox(self)
self.cmbMode3D.addItems(modes)
self.cmbMode3D.setObjectName("cmbShow3D")
self.cmbMode3D.setToolTip("Select 3D-plot mode.")
self.cmbMode3D.setCurrentIndex(0)
self.cmbMode3D.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.chkColormap_r = QCheckBox("reverse", self)
self.chkColormap_r.setToolTip("reverse colormap")
self.chkColormap_r.setChecked(True)
self.cmbColormap = QComboBox(self)
self._init_cmb_colormap(cmap_init=self.cmap_default)
self.cmbColormap.setToolTip("Select colormap")
self.chkColBar = QCheckBox("Colorbar", self)
self.chkColBar.setObjectName("chkColBar")
self.chkColBar.setToolTip("Show colorbar")
self.chkColBar.setChecked(False)
self.chkLighting = QCheckBox("Lighting", self)
self.chkLighting.setObjectName("chkLighting")
self.chkLighting.setToolTip("Enable light source")
self.chkLighting.setChecked(False)
self.lblAlpha = QLabel("Alpha", self)
self.diaAlpha = QDial(self)
self.diaAlpha.setRange(0., 10.)
self.diaAlpha.setValue(10)
self.diaAlpha.setTracking(False) # produce less events when turning
self.diaAlpha.setFixedHeight(30)
self.diaAlpha.setFixedWidth(30)
self.diaAlpha.setWrapping(False)
self.diaAlpha.setToolTip(
"<span>Set transparency for surf and contour plots.</span>")
self.lblHatch = QLabel("Stride", self)
self.diaHatch = QDial(self)
self.diaHatch.setRange(0., 9.)
self.diaHatch.setValue(5)
self.diaHatch.setTracking(False) # produce less events when turning
self.diaHatch.setFixedHeight(30)
self.diaHatch.setFixedWidth(30)
self.diaHatch.setWrapping(False)
self.diaHatch.setToolTip("Set line density for various plots.")
self.chkContour2D = QCheckBox("Contour2D", self)
self.chkContour2D.setObjectName("chkContour2D")
self.chkContour2D.setToolTip("Plot 2D-contours at z =0")
self.chkContour2D.setChecked(False)
#----------------------------------------------------------------------
# LAYOUT for UI widgets
#----------------------------------------------------------------------
layGControls = QGridLayout()
layGControls.addWidget(self.chkLog, 0, 0)
layGControls.addWidget(self.chk_plot_in_UC, 1, 0)
layGControls.addWidget(self.lblTop, 0, 2)
layGControls.addWidget(self.ledTop, 0, 4)
layGControls.addWidget(self.lblTopdB, 0, 5)
layGControls.addWidget(self.lblBottom, 1, 2)
layGControls.addWidget(self.ledBottom, 1, 4)
layGControls.addWidget(self.lblBottomdB, 1, 5)
layGControls.setColumnStretch(5, 1)
layGControls.addWidget(self.chkUC, 0, 6)
layGControls.addWidget(self.chkHf, 1, 6)
layGControls.addWidget(self.chkPZ, 0, 8)
layGControls.addWidget(self.cmbMode3D, 0, 10)
layGControls.addWidget(self.chkContour2D, 1, 10)
layGControls.addWidget(self.cmbColormap, 0, 12, 1, 1)
layGControls.addWidget(self.chkColormap_r, 1, 12)
layGControls.addWidget(self.chkLighting, 0, 14)
layGControls.addWidget(self.chkColBar, 1, 14)
layGControls.addWidget(self.lblAlpha, 0, 15)
layGControls.addWidget(self.diaAlpha, 0, 16)
layGControls.addWidget(self.lblHatch, 1, 15)
layGControls.addWidget(self.diaHatch, 1, 16)
# This widget encompasses all control subwidgets
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layGControls)
#----------------------------------------------------------------------
# mplwidget
#----------------------------------------------------------------------
# This is the plot pane widget, encompassing the other widgets
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.mplwidget.mplToolbar.a_he.setEnabled(True)
self.mplwidget.mplToolbar.a_he.info = "manual/plot_3d.html"
self.setLayout(self.mplwidget.layVMainMpl)
self._init_grid() # initialize grid and do initial plot
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.chkLog.clicked.connect(self._log_clicked)
self.ledBottom.editingFinished.connect(self._log_clicked)
self.ledTop.editingFinished.connect(self._log_clicked)
self.chk_plot_in_UC.clicked.connect(self._init_grid)
self.chkUC.clicked.connect(self.draw)
self.chkHf.clicked.connect(self.draw)
self.chkPZ.clicked.connect(self.draw)
self.cmbMode3D.currentIndexChanged.connect(self.draw)
self.chkColBar.clicked.connect(self.draw)
self.cmbColormap.currentIndexChanged.connect(self.draw)
self.chkColormap_r.clicked.connect(self.draw)
self.chkLighting.clicked.connect(self.draw)
self.diaAlpha.valueChanged.connect(self.draw)
self.diaHatch.valueChanged.connect(self.draw)
self.chkContour2D.clicked.connect(self.draw)
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
def _construct_UI(self):
# ----------- ---------------------------------------------------
# Run control widgets
# ---------------------------------------------------------------
self.chk_auto_run = QCheckBox("Auto", self)
self.chk_auto_run.setObjectName("chk_auto_run")
self.chk_auto_run.setToolTip("<span>Update response automatically when "
"parameters have been changed.</span>")
self.chk_auto_run.setChecked(True)
self.but_run = QPushButton(self)
self.but_run.setText("RUN")
self.but_run.setToolTip("Run simulation")
self.but_run.setEnabled(not self.chk_auto_run.isChecked())
self.cmb_sim_select = QComboBox(self)
self.cmb_sim_select.addItems(["Float","Fixpoint"])
qset_cmb_box(self.cmb_sim_select, "Float")
self.cmb_sim_select.setToolTip("<span>Simulate floating-point or fixpoint response."
"</span>")
self.lbl_N_points = QLabel(to_html("N", frmt='bi') + " =", self)
self.led_N_points = QLineEdit(self)
self.led_N_points.setText(str(self.N))
self.led_N_points.setToolTip("<span>Number of displayed data points. "
"<i>N</i> = 0 tries to choose for you.</span>")
self.lbl_N_start = QLabel(to_html("N_0", frmt='bi') + " =", self)
self.led_N_start = QLineEdit(self)
self.led_N_start.setText(str(self.N_start))
self.led_N_start.setToolTip("<span>First point to plot.</span>")
self.chk_fx_scale = QCheckBox("Int. scale", self)
self.chk_fx_scale.setObjectName("chk_fx_scale")
self.chk_fx_scale.setToolTip("<span>Display data with integer (fixpoint) scale.</span>")
self.chk_fx_scale.setChecked(False)
self.chk_stim_options = QCheckBox("Stim. Options", self)
self.chk_stim_options.setObjectName("chk_stim_options")
self.chk_stim_options.setToolTip("<span>Show stimulus options.</span>")
self.chk_stim_options.setChecked(True)
self.but_fft_win = QPushButton(self)
self.but_fft_win.setText("WIN FFT")
self.but_fft_win.setToolTip('<span> time and frequency response of FFT Window '
'(can be modified in the "Frequency" tab)</span>')
self.but_fft_win.setCheckable(True)
self.but_fft_win.setChecked(False)
layH_ctrl_run = QHBoxLayout()
layH_ctrl_run.addWidget(self.but_run)
#layH_ctrl_run.addWidget(self.lbl_sim_select)
layH_ctrl_run.addWidget(self.cmb_sim_select)
layH_ctrl_run.addWidget(self.chk_auto_run)
layH_ctrl_run.addStretch(1)
layH_ctrl_run.addWidget(self.lbl_N_start)
layH_ctrl_run.addWidget(self.led_N_start)
layH_ctrl_run.addStretch(1)
layH_ctrl_run.addWidget(self.lbl_N_points)
layH_ctrl_run.addWidget(self.led_N_points)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.chk_fx_scale)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.chk_stim_options)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.but_fft_win)
layH_ctrl_run.addStretch(10)
#layH_ctrl_run.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_run = QWidget(self)
self.wdg_ctrl_run.setLayout(layH_ctrl_run)
# --- end of run control ----------------------------------------
# ----------- ---------------------------------------------------
# Controls for time domain
# ---------------------------------------------------------------
plot_styles_list = ["None","Dots","Line","Line*","Stem","Stem*","Step","Step*"]
lbl_plt_time_title = QLabel("<b>View:</b>", self)
self.lbl_plt_time_stim = QLabel(to_html("Stimulus x", frmt='bi'), self)
self.cmb_plt_time_stim = QComboBox(self)
self.cmb_plt_time_stim.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_stim, self.plt_time_stim)
self.cmb_plt_time_stim.setToolTip("<span>Plot style for stimulus.</span>")
self.lbl_plt_time_stmq = QLabel(to_html(" Fixp. Stim. x_Q", frmt='bi'), self)
self.cmb_plt_time_stmq = QComboBox(self)
self.cmb_plt_time_stmq.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_stmq, self.plt_time_stmq)
self.cmb_plt_time_stmq.setToolTip("<span>Plot style for <em>fixpoint</em> (quantized) stimulus.</span>")
lbl_plt_time_resp = QLabel(to_html(" Response y", frmt='bi'), self)
self.cmb_plt_time_resp = QComboBox(self)
self.cmb_plt_time_resp.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_resp, self.plt_time_resp)
self.cmb_plt_time_resp.setToolTip("<span>Plot style for response.</span>")
lbl_win_time = QLabel(to_html(" FFT Window", frmt='bi'), self)
self.chk_win_time = QCheckBox(self)
self.chk_win_time.setObjectName("chk_win_time")
self.chk_win_time.setToolTip('<span>Show FFT windowing function (can be modified in the "Frequency" tab).</span>')
self.chk_win_time.setChecked(False)
lbl_log_time = QLabel(to_html("dB", frmt='b'), self)
self.chk_log_time = QCheckBox(self)
self.chk_log_time.setObjectName("chk_log_time")
self.chk_log_time.setToolTip("<span>Logarithmic scale for y-axis.</span>")
self.chk_log_time.setChecked(False)
self.lbl_log_bottom_time = QLabel(to_html("min =", frmt='bi'), self)
self.lbl_log_bottom_time.setVisible(True)
self.led_log_bottom_time = QLineEdit(self)
self.led_log_bottom_time.setText(str(self.bottom_t))
self.led_log_bottom_time.setToolTip("<span>Minimum display value for time "
"and spectrogram plots with log. scale.</span>")
self.led_log_bottom_time.setVisible(True)
lbl_plt_time_spgr = QLabel(to_html(" Spectrogram", frmt='bi'), self)
self.cmb_plt_time_spgr = QComboBox(self)
self.cmb_plt_time_spgr.addItems(["None", "x[n]", "x_q[n]", "y[n]"])
qset_cmb_box(self.cmb_plt_time_spgr, self.plt_time_spgr)
self.cmb_plt_time_spgr.setToolTip("<span>Show Spectrogram for selected signal.</span>")
spgr_en = self.plt_time_spgr != "None"
self.lbl_log_spgr_time = QLabel(to_html(" dB", frmt='b'), self)
self.lbl_log_spgr_time.setVisible(spgr_en)
self.chk_log_spgr_time = QCheckBox(self)
self.chk_log_spgr_time.setObjectName("chk_log_spgr")
self.chk_log_spgr_time.setToolTip("<span>Logarithmic scale for spectrogram.</span>")
self.chk_log_spgr_time.setChecked(True)
self.chk_log_spgr_time.setVisible(spgr_en)
self.lbl_nfft_spgr_time = QLabel(to_html(" N_FFT =", frmt='bi'), self)
self.lbl_nfft_spgr_time.setVisible(spgr_en)
self.led_nfft_spgr_time = QLineEdit(self)
self.led_nfft_spgr_time.setText(str(self.nfft_spgr_time))
self.led_nfft_spgr_time.setToolTip("<span>Number of FFT points per spectrogram segment.</span>")
self.led_nfft_spgr_time.setVisible(spgr_en)
self.lbl_ovlp_spgr_time = QLabel(to_html(" N_OVLP =", frmt='bi'), self)
self.lbl_ovlp_spgr_time.setVisible(spgr_en)
self.led_ovlp_spgr_time = QLineEdit(self)
self.led_ovlp_spgr_time.setText(str(self.ovlp_spgr_time))
self.led_ovlp_spgr_time.setToolTip("<span>Number of overlap data points between spectrogram segments.</span>")
self.led_ovlp_spgr_time.setVisible(spgr_en)
self.lbl_mode_spgr_time = QLabel(to_html(" Mode", frmt='bi'), self)
self.lbl_mode_spgr_time.setVisible(spgr_en)
self.cmb_mode_spgr_time = QComboBox(self)
spgr_modes = [("PSD","psd"), ("Mag.","magnitude"),\
("Angle","angle"), ("Phase","phase")]
for i in spgr_modes:
self.cmb_mode_spgr_time.addItem(*i)
qset_cmb_box(self.cmb_mode_spgr_time, self.mode_spgr_time, data=True)
self.cmb_mode_spgr_time.setToolTip("<span>Spectrogram display mode.</span>")
self.cmb_mode_spgr_time.setVisible(spgr_en)
self.lbl_byfs_spgr_time = QLabel(to_html(" per f_S", frmt='b'), self)
self.lbl_byfs_spgr_time.setVisible(spgr_en)
self.chk_byfs_spgr_time = QCheckBox(self)
self.chk_byfs_spgr_time.setObjectName("chk_log_spgr")
self.chk_byfs_spgr_time.setToolTip("<span>Display spectral density i.e. scale by f_S</span>")
self.chk_byfs_spgr_time.setChecked(True)
self.chk_byfs_spgr_time.setVisible(spgr_en)
# self.lbl_colorbar_time = QLabel(to_html(" Col.bar", frmt='b'), self)
# self.lbl_colorbar_time.setVisible(spgr_en)
# self.chk_colorbar_time = QCheckBox(self)
# self.chk_colorbar_time.setObjectName("chk_colorbar_time")
# self.chk_colorbar_time.setToolTip("<span>Enable colorbar</span>")
# self.chk_colorbar_time.setChecked(True)
# self.chk_colorbar_time.setVisible(spgr_en)
self.chk_fx_limits = QCheckBox("Min/max.", self)
self.chk_fx_limits.setObjectName("chk_fx_limits")
self.chk_fx_limits.setToolTip("<span>Display limits of fixpoint range.</span>")
self.chk_fx_limits.setChecked(False)
layH_ctrl_time = QHBoxLayout()
layH_ctrl_time.addWidget(lbl_plt_time_title)
layH_ctrl_time.addStretch(1)
layH_ctrl_time.addWidget(self.lbl_plt_time_stim)
layH_ctrl_time.addWidget(self.cmb_plt_time_stim)
#
layH_ctrl_time.addWidget(self.lbl_plt_time_stmq)
layH_ctrl_time.addWidget(self.cmb_plt_time_stmq)
#
layH_ctrl_time.addWidget(lbl_plt_time_resp)
layH_ctrl_time.addWidget(self.cmb_plt_time_resp)
#
layH_ctrl_time.addWidget(lbl_win_time)
layH_ctrl_time.addWidget(self.chk_win_time)
layH_ctrl_time.addStretch(1)
layH_ctrl_time.addWidget(lbl_log_time)
layH_ctrl_time.addWidget(self.chk_log_time)
layH_ctrl_time.addWidget(self.lbl_log_bottom_time)
layH_ctrl_time.addWidget(self.led_log_bottom_time)
#
layH_ctrl_time.addStretch(1)
#
layH_ctrl_time.addWidget(lbl_plt_time_spgr)
layH_ctrl_time.addWidget(self.cmb_plt_time_spgr)
layH_ctrl_time.addWidget(self.lbl_log_spgr_time)
layH_ctrl_time.addWidget(self.chk_log_spgr_time)
layH_ctrl_time.addWidget(self.lbl_nfft_spgr_time)
layH_ctrl_time.addWidget(self.led_nfft_spgr_time)
layH_ctrl_time.addWidget(self.lbl_ovlp_spgr_time)
layH_ctrl_time.addWidget(self.led_ovlp_spgr_time)
layH_ctrl_time.addWidget(self.lbl_mode_spgr_time)
layH_ctrl_time.addWidget(self.cmb_mode_spgr_time)
layH_ctrl_time.addWidget(self.lbl_byfs_spgr_time)
layH_ctrl_time.addWidget(self.chk_byfs_spgr_time)
layH_ctrl_time.addStretch(2)
layH_ctrl_time.addWidget(self.chk_fx_limits)
layH_ctrl_time.addStretch(10)
#layH_ctrl_time.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_time = QWidget(self)
self.wdg_ctrl_time.setLayout(layH_ctrl_time)
# ---- end time domain ------------------
# ---------------------------------------------------------------
# Controls for frequency domain
# ---------------------------------------------------------------
lbl_plt_freq_title = QLabel("<b>View:</b>", self)
self.lbl_plt_freq_stim = QLabel(to_html("Stimulus X", frmt='bi'), self)
self.cmb_plt_freq_stim = QComboBox(self)
self.cmb_plt_freq_stim.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_stim, self.plt_freq_stim)
self.cmb_plt_freq_stim.setToolTip("<span>Plot style for stimulus.</span>")
self.lbl_plt_freq_stmq = QLabel(to_html(" Fixp. Stim. X_Q", frmt='bi'), self)
self.cmb_plt_freq_stmq = QComboBox(self)
self.cmb_plt_freq_stmq.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_stmq, self.plt_freq_stmq)
self.cmb_plt_freq_stmq.setToolTip("<span>Plot style for <em>fixpoint</em> (quantized) stimulus.</span>")
lbl_plt_freq_resp = QLabel(to_html(" Response Y", frmt='bi'), self)
self.cmb_plt_freq_resp = QComboBox(self)
self.cmb_plt_freq_resp.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_resp, self.plt_freq_resp)
self.cmb_plt_freq_resp.setToolTip("<span>Plot style for response.</span>")
lbl_log_freq = QLabel(to_html("dB", frmt='b'), self)
self.chk_log_freq = QCheckBox(self)
self.chk_log_freq.setObjectName("chk_log_freq")
self.chk_log_freq.setToolTip("<span>Logarithmic scale for y-axis.</span>")
self.chk_log_freq.setChecked(True)
self.lbl_log_bottom_freq = QLabel(to_html("min =", frmt='bi'), self)
self.lbl_log_bottom_freq.setVisible(self.chk_log_freq.isChecked())
self.led_log_bottom_freq = QLineEdit(self)
self.led_log_bottom_freq.setText(str(self.bottom_f))
self.led_log_bottom_freq.setToolTip("<span>Minimum display value for log. scale.</span>")
self.led_log_bottom_freq.setVisible(self.chk_log_freq.isChecked())
if not self.chk_log_freq.isChecked():
self.bottom_f = 0
lbl_re_im_freq = QLabel(to_html("Re / Im", frmt='b'), self)
self.chk_re_im_freq = QCheckBox(self)
self.chk_re_im_freq.setObjectName("chk_re_im_freq")
self.chk_re_im_freq.setToolTip("<span>Show real and imaginary part of spectrum</span>")
self.chk_re_im_freq.setChecked(False)
self.lbl_win_fft = QLabel(to_html("Window", frmt='bi'), self)
self.cmb_win_fft = QComboBox(self)
self.cmb_win_fft.addItems(get_window_names())
self.cmb_win_fft.setToolTip("FFT window type.")
qset_cmb_box(self.cmb_win_fft, self.window_name)
self.cmb_win_fft_variant = QComboBox(self)
self.cmb_win_fft_variant.setToolTip("FFT window variant.")
self.cmb_win_fft_variant.setVisible(False)
self.lblWinPar1 = QLabel("Param1")
self.ledWinPar1 = QLineEdit(self)
self.ledWinPar1.setText("1")
self.ledWinPar1.setObjectName("ledWinPar1")
self.lblWinPar2 = QLabel("Param2")
self.ledWinPar2 = QLineEdit(self)
self.ledWinPar2.setText("2")
self.ledWinPar2.setObjectName("ledWinPar2")
self.chk_Hf = QCheckBox(self)
self.chk_Hf.setObjectName("chk_Hf")
self.chk_Hf.setToolTip("<span>Show ideal frequency response, calculated "
"from the filter coefficients.</span>")
self.chk_Hf.setChecked(False)
self.chk_Hf_lbl = QLabel(to_html("H_id (f)", frmt="bi"), self)
lbl_show_info_freq = QLabel(to_html("Info", frmt='b'), self)
self.chk_show_info_freq = QCheckBox(self)
self.chk_show_info_freq.setObjectName("chk_show_info_freq")
self.chk_show_info_freq.setToolTip("<span>Show infos about signal power "
"and window properties.</span>")
self.chk_show_info_freq.setChecked(False)
layH_ctrl_freq = QHBoxLayout()
layH_ctrl_freq.addWidget(lbl_plt_freq_title)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stim)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stim)
#
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stmq)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stmq)
#
layH_ctrl_freq.addWidget(lbl_plt_freq_resp)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_resp)
#
layH_ctrl_freq.addWidget(self.chk_Hf_lbl)
layH_ctrl_freq.addWidget(self.chk_Hf)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(lbl_log_freq)
layH_ctrl_freq.addWidget(self.chk_log_freq)
layH_ctrl_freq.addWidget(self.lbl_log_bottom_freq)
layH_ctrl_freq.addWidget(self.led_log_bottom_freq)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(lbl_re_im_freq)
layH_ctrl_freq.addWidget(self.chk_re_im_freq)
layH_ctrl_freq.addStretch(2)
layH_ctrl_freq.addWidget(self.lbl_win_fft)
layH_ctrl_freq.addWidget(self.cmb_win_fft)
layH_ctrl_freq.addWidget(self.cmb_win_fft_variant)
layH_ctrl_freq.addWidget(self.lblWinPar1)
layH_ctrl_freq.addWidget(self.ledWinPar1)
layH_ctrl_freq.addWidget(self.lblWinPar2)
layH_ctrl_freq.addWidget(self.ledWinPar2)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(lbl_show_info_freq)
layH_ctrl_freq.addWidget(self.chk_show_info_freq)
layH_ctrl_freq.addStretch(10)
#layH_ctrl_freq.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_freq = QWidget(self)
self.wdg_ctrl_freq.setLayout(layH_ctrl_freq)
# ---- end Frequency Domain ------------------
# ---------------------------------------------------------------
# Controls for stimuli
# ---------------------------------------------------------------
lbl_title_stim = QLabel("<b>Stimulus:</b>", self)
self.lblStimulus = QLabel(to_html("Type", frmt='bi'), self)
self.cmbStimulus = QComboBox(self)
self.cmbStimulus.addItems(["None","Impulse","Step","StepErr","Cos","Sine", "Chirp",
"Triang","Saw","Rect","Comb","AM","PM / FM","Formula"])
self.cmbStimulus.setToolTip("Stimulus type.")
qset_cmb_box(self.cmbStimulus, self.stim)
self.chk_stim_bl = QCheckBox("BL", self)
self.chk_stim_bl.setToolTip("<span>The signal is bandlimited to the Nyquist frequency "
"to avoid aliasing. However, it is much slower to generate "
"than the regular version.</span>")
self.chk_stim_bl.setChecked(True)
self.chk_stim_bl.setObjectName("stim_bl")
self.cmbChirpMethod = QComboBox(self)
for t in [("Lin","Linear"),("Square","Quadratic"),("Log", "Logarithmic"), ("Hyper", "Hyperbolic")]:
self.cmbChirpMethod.addItem(*t)
qset_cmb_box(self.cmbChirpMethod, self.chirp_method, data=False)
self.chk_scale_impz_f = QCheckBox("Scale", self)
self.chk_scale_impz_f.setToolTip("<span>Scale the FFT of the impulse response with <i>N<sub>FFT</sub></i> "
"so that it has the same magnitude as |H(f)|. DC and Noise need to be "
"turned off.</span>")
self.chk_scale_impz_f.setChecked(True)
self.chk_scale_impz_f.setObjectName("scale_impz_f")
self.lblDC = QLabel(to_html("DC =", frmt='bi'), self)
self.ledDC = QLineEdit(self)
self.ledDC.setText(str(self.DC))
self.ledDC.setToolTip("DC Level")
self.ledDC.setObjectName("stimDC")
layHCmbStim = QHBoxLayout()
layHCmbStim.addWidget(self.cmbStimulus)
layHCmbStim.addWidget(self.chk_stim_bl)
layHCmbStim.addWidget(self.chk_scale_impz_f)
layHCmbStim.addWidget(self.cmbChirpMethod)
#----------------------------------------------
self.lblAmp1 = QLabel(to_html(" A_1", frmt='bi') + " =", self)
self.ledAmp1 = QLineEdit(self)
self.ledAmp1.setText(str(self.A1))
self.ledAmp1.setToolTip("Stimulus amplitude, complex values like 3j - 1 are allowed")
self.ledAmp1.setObjectName("stimAmp1")
self.lblAmp2 = QLabel(to_html(" A_2", frmt='bi') + " =", self)
self.ledAmp2 = QLineEdit(self)
self.ledAmp2.setText(str(self.A2))
self.ledAmp2.setToolTip("Stimulus amplitude 2, complex values like 3j - 1 are allowed")
self.ledAmp2.setObjectName("stimAmp2")
#----------------------------------------------
self.lblPhi1 = QLabel(to_html(" φ_1", frmt='bi') + " =", self)
self.ledPhi1 = QLineEdit(self)
self.ledPhi1.setText(str(self.phi1))
self.ledPhi1.setToolTip("Stimulus phase")
self.ledPhi1.setObjectName("stimPhi1")
self.lblPhU1 = QLabel(to_html("°", frmt='b'), self)
self.lblPhi2 = QLabel(to_html(" φ_2", frmt='bi') + " =", self)
self.ledPhi2 = QLineEdit(self)
self.ledPhi2.setText(str(self.phi2))
self.ledPhi2.setToolTip("Stimulus phase 2")
self.ledPhi2.setObjectName("stimPhi2")
self.lblPhU2 = QLabel(to_html("°", frmt='b'), self)
#----------------------------------------------
self.lblFreq1 = QLabel(to_html(" f_1", frmt='bi') + " =", self)
self.ledFreq1 = QLineEdit(self)
self.ledFreq1.setText(str(self.f1))
self.ledFreq1.setToolTip("Stimulus frequency 1")
self.ledFreq1.setObjectName("stimFreq1")
self.lblFreqUnit1 = QLabel("f_S", self)
self.lblFreq2 = QLabel(to_html(" f_2", frmt='bi') + " =", self)
self.ledFreq2 = QLineEdit(self)
self.ledFreq2.setText(str(self.f2))
self.ledFreq2.setToolTip("Stimulus frequency 2")
self.ledFreq2.setObjectName("stimFreq2")
self.lblFreqUnit2 = QLabel("f_S", self)
#----------------------------------------------
self.lblNoise = QLabel(to_html(" Noise", frmt='bi'), self)
self.cmbNoise = QComboBox(self)
self.cmbNoise.addItems(["None","Gauss","Uniform","PRBS"])
self.cmbNoise.setToolTip("Type of additive noise.")
qset_cmb_box(self.cmbNoise, self.noise)
self.lblNoi = QLabel("not initialized", self)
self.ledNoi = QLineEdit(self)
self.ledNoi.setText(str(self.noi))
self.ledNoi.setToolTip("not initialized")
self.ledNoi.setObjectName("stimNoi")
layGStim = QGridLayout()
layGStim.addWidget(self.lblStimulus, 0, 0)
layGStim.addWidget(self.lblDC, 1, 0)
layGStim.addLayout(layHCmbStim, 0, 1)
layGStim.addWidget(self.ledDC, 1, 1)
layGStim.addWidget(self.lblAmp1, 0, 2)
layGStim.addWidget(self.lblAmp2, 1, 2)
layGStim.addWidget(self.ledAmp1, 0, 3)
layGStim.addWidget(self.ledAmp2, 1, 3)
layGStim.addWidget(self.lblPhi1, 0, 4)
layGStim.addWidget(self.lblPhi2, 1, 4)
layGStim.addWidget(self.ledPhi1, 0, 5)
layGStim.addWidget(self.ledPhi2, 1, 5)
layGStim.addWidget(self.lblPhU1, 0, 6)
layGStim.addWidget(self.lblPhU2, 1, 6)
layGStim.addWidget(self.lblFreq1, 0, 7)
layGStim.addWidget(self.lblFreq2, 1, 7)
layGStim.addWidget(self.ledFreq1, 0, 8)
layGStim.addWidget(self.ledFreq2, 1, 8)
layGStim.addWidget(self.lblFreqUnit1, 0, 9)
layGStim.addWidget(self.lblFreqUnit2, 1, 9)
layGStim.addWidget(self.lblNoise, 0, 10)
layGStim.addWidget(self.lblNoi, 1, 10)
layGStim.addWidget(self.cmbNoise, 0, 11)
layGStim.addWidget(self.ledNoi, 1, 11)
#----------------------------------------------
self.lblStimFormula = QLabel(to_html("x =", frmt='bi'), self)
self.ledStimFormula = QLineEdit(self)
self.ledStimFormula.setText(str(self.stim_formula))
self.ledStimFormula.setToolTip("<span>Enter formula for stimulus in numexpr syntax"
"</span>")
self.ledStimFormula.setObjectName("stimFormula")
layH_ctrl_stim_formula = QHBoxLayout()
layH_ctrl_stim_formula.addWidget(self.lblStimFormula)
layH_ctrl_stim_formula.addWidget(self.ledStimFormula,10)
#----------------------------------------------
#layG_ctrl_stim = QGridLayout()
layH_ctrl_stim_par = QHBoxLayout()
layH_ctrl_stim_par.addLayout(layGStim)
layV_ctrl_stim = QVBoxLayout()
layV_ctrl_stim.addLayout(layH_ctrl_stim_par)
layV_ctrl_stim.addLayout(layH_ctrl_stim_formula)
layH_ctrl_stim = QHBoxLayout()
layH_ctrl_stim.addWidget(lbl_title_stim)
layH_ctrl_stim.addStretch(1)
layH_ctrl_stim.addLayout(layV_ctrl_stim)
layH_ctrl_stim.addStretch(10)
self.wdg_ctrl_stim = QWidget(self)
self.wdg_ctrl_stim.setLayout(layH_ctrl_stim)
# --------- end stimuli ---------------------------------
# frequency widgets require special handling as they are scaled with f_s
self.ledFreq1.installEventFilter(self)
self.ledFreq2.installEventFilter(self)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
# --- run control ---
self.led_N_start.editingFinished.connect(self.update_N)
self.led_N_points.editingFinished.connect(self.update_N)
# --- frequency control ---
# careful! currentIndexChanged passes the current index to _update_win_fft
self.cmb_win_fft.currentIndexChanged.connect(self._update_win_fft)
self.ledWinPar1.editingFinished.connect(self._read_param1)
self.ledWinPar2.editingFinished.connect(self._read_param2)
# --- stimulus control ---
self.chk_stim_options.clicked.connect(self._show_stim_options)
self.chk_stim_bl.clicked.connect(self._enable_stim_widgets)
self.cmbStimulus.currentIndexChanged.connect(self._enable_stim_widgets)
self.cmbNoise.currentIndexChanged.connect(self._update_noi)
self.ledNoi.editingFinished.connect(self._update_noi)
self.ledAmp1.editingFinished.connect(self._update_amp1)
self.ledAmp2.editingFinished.connect(self._update_amp2)
self.ledPhi1.editingFinished.connect(self._update_phi1)
self.ledPhi2.editingFinished.connect(self._update_phi2)
self.cmbChirpMethod.currentIndexChanged.connect(self._update_chirp_method)
self.ledDC.editingFinished.connect(self._update_DC)
self.ledStimFormula.editingFinished.connect(self._update_stim_formula)
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.chkWarnings = QCheckBox(self.tr("Verbose"), self)
self.chkWarnings.setChecked(self.verbose)
self.chkWarnings.setToolTip(self.tr("<span>Print messages about singular group delay"
"and calculation times."))
self.cmbAlgorithm = QComboBox(self)
for t in [(self.tr("Auto"),"auto"),(self.tr("Scipy"),"scipy"), (self.tr("JOS"), "jos"),
(self.tr("Diff"), "diff"), (self.tr("Shpak"), "shpak")]: # text, data
self.cmbAlgorithm.addItem(*t)
qset_cmb_box(self.cmbAlgorithm, self.algorithm,data=True)
self.cmbAlgorithm.setToolTip(self.tr("<span>Select algorithm for calculating "
"the group delay.</span>"))
self.cmbAlgorithm.setItemData(0, self.tr("<span>Try to find best-suited algorithm."
"</span>"),Qt.ToolTipRole)
self.cmbAlgorithm.setItemData(1, self.tr("<span>Scipy algorithm.</span>"),Qt.ToolTipRole)
self.cmbAlgorithm.setItemData(2, self.tr("<span>J.O. Smith's algorithm.</span>"),Qt.ToolTipRole)
self.cmbAlgorithm.setItemData(3, self.tr("<span>Textbook-style, differentiate "
"the phase.</span>"),Qt.ToolTipRole)
self.cmbAlgorithm.setItemData(4, self.tr("<span>Shpak's algorithm for SOS and other "
"IIR filters.</span>"),Qt.ToolTipRole)
#self.chkScipy = QCheckBox("Scipy", self)
#self.chkScipy.setChecked(False)
#self.chkScipy.setToolTip("Use scipy group delay routine")
layHControls = QHBoxLayout()
layHControls.addStretch(10)
layHControls.addWidget(self.chkWarnings)
#layHControls.addWidget(self.chkScipy)
layHControls.addWidget(self.cmbAlgorithm)
# This widget encompasses all control subwidgets:
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.mplwidget.mplToolbar.a_he.setEnabled(True)
self.mplwidget.mplToolbar.a_he.info = "manual/plot_tau_g.html"
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # initial drawing of tau_g
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
self.cmbAlgorithm.currentIndexChanged.connect(self.draw)
class Plot_FFT_win(QDialog):
"""
Create a pop-up widget for displaying time and frequency view of an FFT
window.
Data is passed via the dictionary `win_dict` that is passed during construction.
"""
# incoming
sig_rx = pyqtSignal(object)
# outgoing
sig_tx = pyqtSignal(object)
def __init__(self,
parent,
win_dict=fb.fil[0]['win_fft'],
sym=True,
title='pyFDA Window Viewer'):
super(Plot_FFT_win, self).__init__(parent)
self.needs_calc = True
self.needs_draw = True
self.needs_redraw = True
self.bottom_f = -80 # min. value for dB display
self.bottom_t = -60
self.N = 32 # initial number of data points
self.N_auto = win_dict['win_len']
self.pad = 16 # amount of zero padding
self.win_dict = win_dict
self.sym = sym
self.tbl_rows = 2
self.tbl_cols = 6
# initial settings for checkboxes
self.tbl_sel = [True, True, False, False]
self.setAttribute(Qt.WA_DeleteOnClose)
self.setWindowTitle(title)
self._construct_UI()
qwindow_stay_on_top(self, True)
#------------------------------------------------------------------------------
def closeEvent(self, event):
"""
Catch closeEvent (user has tried to close the window) and send a
signal to parent where window closing is registered before actually
closing the window.
"""
self.sig_tx.emit({'sender': __name__, 'closeEvent': ''})
event.accept()
#------------------------------------------------------------------------------
def process_sig_rx(self, dict_sig=None):
"""
Process signals coming from the navigation toolbar and from sig_rx
"""
logger.debug("PROCESS_SIG_RX - vis: {0}\n{1}"\
.format(self.isVisible(), pprint_log(dict_sig)))
if ('view_changed' in dict_sig and dict_sig['view_changed'] == 'win')\
or ('filt_changed' in dict_sig and dict_sig['filt_changed'] == 'firwin')\
or self.needs_calc:
# logger.warning("Auto: {0} - WinLen: {1}".format(self.N_auto, self.win_dict['win_len']))
self.N_auto = self.win_dict['win_len']
self.calc_N()
if self.isVisible():
self.draw()
self.needs_calc = False
else:
self.needs_calc = True
elif 'home' in dict_sig:
self.update_view()
else:
logger.error("Unknown content of dict_sig: {0}".format(dict_sig))
#------------------------------------------------------------------------------
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.bfont = QFont()
self.bfont.setBold(True)
self.chk_auto_N = QCheckBox(self)
self.chk_auto_N.setChecked(False)
self.chk_auto_N.setToolTip(
"Use number of points from calling routine.")
self.lbl_auto_N = QLabel("Auto " + to_html("N", frmt='i'))
self.led_N = QLineEdit(self)
self.led_N.setText(str(self.N))
self.led_N.setMaximumWidth(70)
self.led_N.setToolTip("<span>Number of window data points.</span>")
self.chk_log_t = QCheckBox("Log", self)
self.chk_log_t.setChecked(False)
self.chk_log_t.setToolTip("Display in dB")
self.led_log_bottom_t = QLineEdit(self)
self.led_log_bottom_t.setText(str(self.bottom_t))
self.led_log_bottom_t.setMaximumWidth(50)
self.led_log_bottom_t.setEnabled(self.chk_log_t.isChecked())
self.led_log_bottom_t.setToolTip(
"<span>Minimum display value for log. scale.</span>")
self.lbl_log_bottom_t = QLabel("dB", self)
self.lbl_log_bottom_t.setEnabled(self.chk_log_t.isChecked())
self.chk_norm_f = QCheckBox("Norm", self)
self.chk_norm_f.setChecked(True)
self.chk_norm_f.setToolTip(
"Normalize window spectrum for a maximum of 1.")
self.chk_half_f = QCheckBox("Half", self)
self.chk_half_f.setChecked(True)
self.chk_half_f.setToolTip(
"Display window spectrum in the range 0 ... 0.5 f_S.")
self.chk_log_f = QCheckBox("Log", self)
self.chk_log_f.setChecked(True)
self.chk_log_f.setToolTip("Display in dB")
self.led_log_bottom_f = QLineEdit(self)
self.led_log_bottom_f.setText(str(self.bottom_f))
self.led_log_bottom_f.setMaximumWidth(50)
self.led_log_bottom_f.setEnabled(self.chk_log_f.isChecked())
self.led_log_bottom_f.setToolTip(
"<span>Minimum display value for log. scale.</span>")
self.lbl_log_bottom_f = QLabel("dB", self)
self.lbl_log_bottom_f.setEnabled(self.chk_log_f.isChecked())
layHControls = QHBoxLayout()
layHControls.addWidget(self.chk_auto_N)
layHControls.addWidget(self.lbl_auto_N)
layHControls.addWidget(self.led_N)
layHControls.addStretch(1)
layHControls.addWidget(self.chk_log_t)
layHControls.addWidget(self.led_log_bottom_t)
layHControls.addWidget(self.lbl_log_bottom_t)
layHControls.addStretch(10)
layHControls.addWidget(self.chk_norm_f)
layHControls.addStretch(1)
layHControls.addWidget(self.chk_half_f)
layHControls.addStretch(1)
layHControls.addWidget(self.chk_log_f)
layHControls.addWidget(self.led_log_bottom_f)
layHControls.addWidget(self.lbl_log_bottom_f)
self.tblWinProperties = QTableWidget(self.tbl_rows, self.tbl_cols,
self)
self.tblWinProperties.setAlternatingRowColors(True)
self.tblWinProperties.verticalHeader().setVisible(False)
self.tblWinProperties.horizontalHeader().setVisible(False)
self._init_table(self.tbl_rows, self.tbl_cols, " ")
self.txtInfoBox = QTextBrowser(self)
#----------------------------------------------------------------------
# ### frmControls ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
#----------------------------------------------------------------------
# ### mplwidget ###
#
# main widget: Layout layVMainMpl (VBox) is defined with MplWidget,
# additional widgets can be added (like self.frmControls)
# The widget encompasses all other widgets.
#----------------------------------------------------------------------
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
#----------------------------------------------------------------------
# ### frmInfo ###
#
# This widget encompasses the text info box and the table with window
# parameters.
#----------------------------------------------------------------------
layVInfo = QVBoxLayout(self)
layVInfo.addWidget(self.tblWinProperties)
layVInfo.addWidget(self.txtInfoBox)
self.frmInfo = QFrame(self)
self.frmInfo.setObjectName("frmInfo")
self.frmInfo.setLayout(layVInfo)
#----------------------------------------------------------------------
# ### splitter ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
splitter = QSplitter(self)
splitter.setOrientation(Qt.Vertical)
splitter.addWidget(self.mplwidget)
splitter.addWidget(self.frmInfo)
# setSizes uses absolute pixel values, but can be "misused" by specifying values
# that are way too large: in this case, the space is distributed according
# to the _ratio_ of the values:
splitter.setSizes([3000, 1000])
layVMain = QVBoxLayout()
layVMain.addWidget(splitter)
self.setLayout(layVMain)
#----------------------------------------------------------------------
# Set subplots
#
self.ax = self.mplwidget.fig.subplots(nrows=1, ncols=2)
self.ax_t = self.ax[0]
self.ax_f = self.ax[1]
self.draw() # initial drawing
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.chk_log_f.clicked.connect(self.update_view)
self.chk_log_t.clicked.connect(self.update_view)
self.led_log_bottom_t.editingFinished.connect(self.update_bottom)
self.led_log_bottom_f.editingFinished.connect(self.update_bottom)
self.chk_auto_N.clicked.connect(self.calc_N)
self.led_N.editingFinished.connect(self.draw)
self.chk_norm_f.clicked.connect(self.draw)
self.chk_half_f.clicked.connect(self.update_view)
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
self.tblWinProperties.itemClicked.connect(self._handle_item_clicked)
#------------------------------------------------------------------------------
def _init_table(self, rows, cols, val):
for r in range(rows):
for c in range(cols):
item = QTableWidgetItem(val)
if c % 3 == 0:
item.setFlags(Qt.ItemIsUserCheckable | Qt.ItemIsEnabled)
if self.tbl_sel[r * 2 + c % 3]:
item.setCheckState(Qt.Checked)
else:
item.setCheckState(Qt.Unchecked)
self.tblWinProperties.setItem(r, c, item)
# https://stackoverflow.com/questions/12366521/pyqt-checkbox-in-qtablewidget
#------------------------------------------------------------------------------
def _set_table_item(self, row, col, val, font=None, sel=None):
"""
Set the table item with the index `row, col` and the value val
"""
item = self.tblWinProperties.item(row, col)
item.setText(str(val))
if font:
self.tblWinProperties.item(row, col).setFont(font)
if sel == True:
item.setCheckState(Qt.Checked)
if sel == False:
item.setCheckState(Qt.Unchecked)
# when sel is not specified, don't change anything
#------------------------------------------------------------------------------
def _handle_item_clicked(self, item):
if item.column() % 3 == 0: # clicked on checkbox
num = item.row() * 2 + item.column() // 3
if item.checkState() == Qt.Checked:
self.tbl_sel[num] = True
logger.debug('"{0}:{1}" Checked'.format(item.text(), num))
else:
self.tbl_sel[num] = False
logger.debug('"{0}:{1}" Unchecked'.format(item.text(), num))
elif item.column() % 3 == 1: # clicked on value field
logger.info("{0:s} copied to clipboard.".format(item.text()))
fb.clipboard.setText(item.text())
self.update_view()
#------------------------------------------------------------------------------
def update_bottom(self):
"""
Update log bottom settings
"""
self.bottom_t = safe_eval(self.led_log_bottom_t.text(),
self.bottom_t,
sign='neg',
return_type='float')
self.led_log_bottom_t.setText(str(self.bottom_t))
self.bottom_f = safe_eval(self.led_log_bottom_f.text(),
self.bottom_f,
sign='neg',
return_type='float')
self.led_log_bottom_f.setText(str(self.bottom_f))
self.update_view()
#------------------------------------------------------------------------------
def calc_N(self):
"""
(Re-)Calculate the number of data points when Auto N chkbox has been
clicked or when the number of data points has been updated outside this
class
"""
if self.chk_auto_N.isChecked():
self.N = self.N_auto
self.draw()
#------------------------------------------------------------------------------
def calc_win(self):
"""
(Re-)Calculate the window and its FFT
"""
self.led_N.setEnabled(not self.chk_auto_N.isChecked())
if not self.chk_auto_N.isChecked():
self.N = safe_eval(self.led_N.text(),
self.N,
sign='pos',
return_type='int')
# else:
#self.N = self.win_dict['win_len']
self.led_N.setText(str(self.N))
self.n = np.arange(self.N)
self.win = calc_window_function(self.win_dict,
self.win_dict['name'],
self.N,
sym=self.sym)
self.nenbw = self.N * np.sum(np.square(self.win)) / (np.square(
np.sum(self.win)))
self.cgain = np.sum(self.win) / self.N
self.F = fftfreq(self.N * self.pad,
d=1. / fb.fil[0]['f_S']) # use zero padding
self.Win = np.abs(fft(self.win, self.N * self.pad))
if self.chk_norm_f.isChecked():
self.Win /= (self.N * self.cgain
) # correct gain for periodic signals (coherent gain)
first_zero = argrelextrema(self.Win[:(self.N * self.pad) // 2],
np.less)
if np.shape(first_zero)[1] > 0:
first_zero = first_zero[0][0]
self.first_zero_f = self.F[first_zero]
self.sidelobe_level = np.max(
self.Win[first_zero:(self.N * self.pad) // 2])
else:
self.first_zero_f = np.nan
self.sidelobe_level = 0
#------------------------------------------------------------------------------
def draw(self):
"""
Main entry point:
Re-calculate \|H(f)\| and draw the figure
"""
self.calc_win()
self.update_view()
#------------------------------------------------------------------------------
def update_view(self):
"""
Draw the figure with new limits, scale etc without recalculating the
window.
"""
# suppress "divide by zero in log10" warnings
old_settings_seterr = np.seterr()
np.seterr(divide='ignore')
self.ax_t.cla()
self.ax_f.cla()
self.ax_t.set_xlabel(fb.fil[0]['plt_tLabel'])
self.ax_t.set_ylabel(r'$w[n] \; \rightarrow$')
self.ax_f.set_xlabel(fb.fil[0]['plt_fLabel'])
self.ax_f.set_ylabel(r'$W(f) \; \rightarrow$')
if self.chk_log_t.isChecked():
self.ax_t.plot(
self.n,
np.maximum(20 * np.log10(np.abs(self.win)), self.bottom_t))
else:
self.ax_t.plot(self.n, self.win)
if self.chk_half_f.isChecked():
F = self.F[:len(self.F * self.pad) // 2]
Win = self.Win[:len(self.F * self.pad) // 2]
else:
F = fftshift(self.F)
Win = fftshift(self.Win)
if self.chk_log_f.isChecked():
self.ax_f.plot(
F, np.maximum(20 * np.log10(np.abs(Win)), self.bottom_f))
self.nenbw_disp = 10 * np.log10(self.nenbw)
self.cgain_disp = 20 * np.log10(self.cgain)
self.sidelobe_level_disp = 20 * np.log10(self.sidelobe_level)
self.unit_nenbw = "dB"
self.unit_scale = "dB"
else:
self.ax_f.plot(F, Win)
self.nenbw_disp = self.nenbw
self.cgain_disp = self.cgain
self.sidelobe_level_disp = self.sidelobe_level
self.unit_nenbw = "bins"
self.unit_scale = ""
self.led_log_bottom_t.setEnabled(self.chk_log_t.isChecked())
self.lbl_log_bottom_t.setEnabled(self.chk_log_t.isChecked())
self.led_log_bottom_f.setEnabled(self.chk_log_f.isChecked())
self.lbl_log_bottom_f.setEnabled(self.chk_log_f.isChecked())
window_name = self.win_dict['name']
param_txt = ""
if self.win_dict['n_par'] > 0:
param_txt = " (" + self.win_dict['par'][0][
'name_tex'] + " = {0:.3g})".format(
self.win_dict['par'][0]['val'])
if self.win_dict['n_par'] > 1:
param_txt = param_txt[:-1]\
+ ", {0:s} = {1:.3g})".format(self.win_dict['par'][1]['name_tex'], self.win_dict['par'][1]['val'])
self.mplwidget.fig.suptitle(r'{0} Window'.format(window_name) +
param_txt)
# plot a line at the max. sidelobe level
if self.tbl_sel[3]:
self.ax_f.axhline(self.sidelobe_level_disp, ls='dotted', c='b')
patch = mpl_patches.Rectangle((0, 0),
1,
1,
fc="white",
ec="white",
lw=0,
alpha=0)
# Info legend for time domain window
labels_t = []
labels_t.append("$N$ = {0:d}".format(self.N))
self.ax_t.legend([patch],
labels_t,
loc='best',
fontsize='small',
fancybox=True,
framealpha=0.7,
handlelength=0,
handletextpad=0)
# Info legend for frequency domain window
labels_f = []
N_patches = 0
if self.tbl_sel[0]:
labels_f.append("$NENBW$ = {0:.4g} {1}".format(
self.nenbw_disp, self.unit_nenbw))
N_patches += 1
if self.tbl_sel[1]:
labels_f.append("$CGAIN$ = {0:.4g} {1}".format(
self.cgain_disp, self.unit_scale))
N_patches += 1
if self.tbl_sel[2]:
labels_f.append("1st Zero = {0:.4g}".format(self.first_zero_f))
N_patches += 1
if N_patches > 0:
self.ax_f.legend([patch] * N_patches,
labels_f,
loc='best',
fontsize='small',
fancybox=True,
framealpha=0.7,
handlelength=0,
handletextpad=0)
np.seterr(**old_settings_seterr)
self.update_info()
self.redraw()
#------------------------------------------------------------------------------
def update_info(self):
"""
Update the text info box for the window
"""
if 'info' in self.win_dict:
self.txtInfoBox.setText(self.win_dict['info'])
self._set_table_item(0, 0, "ENBW", font=self.bfont) #, sel=True)
self._set_table_item(0, 1, "{0:.5g}".format(self.nenbw_disp))
self._set_table_item(0, 2, self.unit_nenbw)
self._set_table_item(0, 3, "Scale", font=self.bfont) #, sel=True)
self._set_table_item(0, 4, "{0:.5g}".format(self.cgain_disp))
self._set_table_item(0, 5, self.unit_scale)
self._set_table_item(1, 0, "1st Zero", font=self.bfont) #, sel=True)
self._set_table_item(1, 1, "{0:.5g}".format(self.first_zero_f))
self._set_table_item(1, 2, "f_S")
self._set_table_item(1, 3, "Sidelobes", font=self.bfont) #, sel=True)
self._set_table_item(1, 4, "{0:.5g}".format(self.sidelobe_level_disp))
self._set_table_item(1, 5, self.unit_scale)
self.tblWinProperties.resizeColumnsToContents()
self.tblWinProperties.resizeRowsToContents()
#------------------------------------------------------------------------------
def redraw(self):
"""
Redraw the canvas when e.g. the canvas size has changed
"""
self.mplwidget.redraw()
self.needs_redraw = False
class SelectFilter(QWidget):
"""
Construct and read combo boxes for selecting the filter, consisting of the
following hierarchy:
1. Response Type rt (LP, HP, Hilbert, ...)
2. Filter Type ft (IIR, FIR, CIC ...)
3. Filter Class (Butterworth, ...)
Every time a combo box is changed manually, the filter tree for the selected
response resp. filter type is read and the combo box(es) further down in
the hierarchy are populated according to the available combinations.
sig_tx({'filt_changed'}) is emitted and propagated to input_filter_specs.py
where it triggers the recreation of all subwidgets.
"""
sig_tx = pyqtSignal(object) # outgoing
from pyfda.libs.pyfda_qt_lib import emit
def __init__(self, parent=None):
super(SelectFilter, self).__init__(parent)
self.fc_last = '' # previous filter class
self._construct_UI()
self._set_response_type() # first time initialization
def _construct_UI(self):
"""
Construct UI with comboboxes for selecting filter:
- cmbResponseType for selecting response type rt (LP, HP, ...)
- cmbFilterType for selection of filter type (IIR, FIR, ...)
- cmbFilterClass for selection of design design class (Chebyshev, ...)
and populate them from the "filterTree" dict during the initial run.
Later, calling _set_response_type() updates the three combo boxes.
See filterbroker.py for structure and content of "filterTree" dict
"""
# ----------------------------------------------------------------------
# Combo boxes for filter selection
# ----------------------------------------------------------------------
self.cmbResponseType = QComboBox(self)
self.cmbResponseType.setObjectName("comboResponseType")
self.cmbResponseType.setToolTip("Select filter response type.")
self.cmbFilterType = QComboBox(self)
self.cmbFilterType.setObjectName("comboFilterType")
self.cmbFilterType.setToolTip(
"<span>Choose filter type, either recursive (Infinite Impulse Response) "
"or transversal (Finite Impulse Response).</span>")
self.cmbFilterClass = QComboBox(self)
self.cmbFilterClass.setObjectName("comboFilterClass")
self.cmbFilterClass.setToolTip("Select the filter design class.")
# Adapt comboboxes size dynamically to largest element
self.cmbResponseType.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.cmbFilterType.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.cmbFilterClass.setSizeAdjustPolicy(QComboBox.AdjustToContents)
# ----------------------------------------------------------------------
# Populate combo box with initial settings from fb.fil_tree
# ----------------------------------------------------------------------
# Translate short response type ("LP") to displayed names ("Lowpass")
# (correspondence is defined in pyfda_rc.py) and populate rt combo box
#
rt_list = sorted(list(fb.fil_tree.keys()))
for rt in rt_list:
try:
self.cmbResponseType.addItem(rc.rt_names[rt], rt)
except KeyError as e:
logger.warning(
f"KeyError: {e} has no corresponding full name in rc.rt_names."
)
idx = self.cmbResponseType.findData('LP') # find index for 'LP'
if idx == -1: # Key 'LP' does not exist, use first entry instead
idx = 0
self.cmbResponseType.setCurrentIndex(idx) # set initial index
rt = qget_cmb_box(self.cmbResponseType)
for ft in fb.fil_tree[rt]:
self.cmbFilterType.addItem(rc.ft_names[ft], ft)
self.cmbFilterType.setCurrentIndex(0) # set initial index
ft = qget_cmb_box(self.cmbFilterType)
for fc in fb.fil_tree[rt][ft]:
self.cmbFilterClass.addItem(fb.filter_classes[fc]['name'], fc)
self.cmbFilterClass.setCurrentIndex(0) # set initial index
# ----------------------------------------------------------------------
# Layout for Filter Type Subwidgets
# ----------------------------------------------------------------------
layHFilWdg = QHBoxLayout() # container for filter subwidgets
layHFilWdg.addWidget(self.cmbResponseType) # LP, HP, BP, etc.
layHFilWdg.addStretch()
layHFilWdg.addWidget(self.cmbFilterType) # FIR, IIR
layHFilWdg.addStretch()
layHFilWdg.addWidget(self.cmbFilterClass) # bessel, elliptic, etc.
# ----------------------------------------------------------------------
# Layout for dynamic filter subwidgets (empty frame)
# ----------------------------------------------------------------------
# see Summerfield p. 278
self.layHDynWdg = QHBoxLayout() # for additional dynamic subwidgets
# ----------------------------------------------------------------------
# Filter Order Subwidgets
# ----------------------------------------------------------------------
self.lblOrder = QLabel("<b>Order:</b>")
self.chkMinOrder = QCheckBox("Minimum", self)
self.chkMinOrder.setToolTip(
"<span>Minimum filter order / # of taps is determined automatically.</span>"
)
self.lblOrderN = QLabel("<b><i>N =</i></b>")
self.ledOrderN = QLineEdit(str(fb.fil[0]['N']), self)
self.ledOrderN.setToolTip("Filter order (# of taps - 1).")
# --------------------------------------------------
# Layout for filter order subwidgets
# --------------------------------------------------
layHOrdWdg = QHBoxLayout()
layHOrdWdg.addWidget(self.lblOrder)
layHOrdWdg.addWidget(self.chkMinOrder)
layHOrdWdg.addStretch()
layHOrdWdg.addWidget(self.lblOrderN)
layHOrdWdg.addWidget(self.ledOrderN)
# ----------------------------------------------------------------------
# OVERALL LAYOUT (stack standard + dynamic subwidgets vertically)
# ----------------------------------------------------------------------
self.layVAllWdg = QVBoxLayout()
self.layVAllWdg.addLayout(layHFilWdg)
self.layVAllWdg.addLayout(self.layHDynWdg)
self.layVAllWdg.addLayout(layHOrdWdg)
# ==============================================================================
frmMain = QFrame(self)
frmMain.setLayout(self.layVAllWdg)
layHMain = QHBoxLayout()
layHMain.addWidget(frmMain)
layHMain.setContentsMargins(*rc.params['wdg_margins'])
self.setLayout(layHMain)
# ==============================================================================
# ------------------------------------------------------------
# SIGNALS & SLOTS
# ------------------------------------------------------------
# Connect comboBoxes and setters, propgate change events hierarchically
# through all widget methods and emit 'filt_changed' in the end.
self.cmbResponseType.currentIndexChanged.connect(
lambda: self._set_response_type(enb_signal=True)) # 'LP'
self.cmbFilterType.currentIndexChanged.connect(
lambda: self._set_filter_type(enb_signal=True)) # 'IIR'
self.cmbFilterClass.currentIndexChanged.connect(
lambda: self._set_design_method(enb_signal=True)) # 'cheby1'
self.chkMinOrder.clicked.connect(
lambda: self._set_filter_order(enb_signal=True)) # Min. Order
self.ledOrderN.editingFinished.connect(
lambda: self._set_filter_order(enb_signal=True)) # Manual Order
# ------------------------------------------------------------
# ------------------------------------------------------------------------------
def load_dict(self):
"""
Reload comboboxes from filter dictionary to update changed settings
after loading a filter design from disk.
`load_dict` uses the automatism of _set_response_type etc.
of checking whether the previously selected filter design method is
also available for the new combination.
"""
# find index for response type:
rt_idx = self.cmbResponseType.findData(fb.fil[0]['rt'])
self.cmbResponseType.setCurrentIndex(rt_idx)
self._set_response_type()
# ------------------------------------------------------------------------------
def _set_response_type(self, enb_signal=False):
"""
Triggered when cmbResponseType (LP, HP, ...) is changed:
Copy selection to self.rt and fb.fil[0] and reconstruct filter type combo
If previous filter type (FIR, IIR, ...) exists for new rt, set the
filter type combo box to the old setting
"""
# Read current setting of comboBox as string and store it in the filter dict
fb.fil[0]['rt'] = self.rt = qget_cmb_box(self.cmbResponseType)
# Get list of available filter types for new rt
ft_list = list(
fb.fil_tree[self.rt].keys()) # explicit list() needed for Py3
# ---------------------------------------------------------------
# Rebuild filter type combobox entries for new rt setting
self.cmbFilterType.blockSignals(
True) # don't fire when changed programmatically
self.cmbFilterType.clear()
for ft in fb.fil_tree[self.rt]:
self.cmbFilterType.addItem(rc.ft_names[ft], ft)
# Is current filter type (e.g. IIR) in list for new rt?
if fb.fil[0]['ft'] in ft_list:
ft_idx = self.cmbFilterType.findText(fb.fil[0]['ft'])
self.cmbFilterType.setCurrentIndex(
ft_idx) # yes, set same ft as before
else:
self.cmbFilterType.setCurrentIndex(0) # no, set index 0
self.cmbFilterType.blockSignals(False)
# ---------------------------------------------------------------
self._set_filter_type(enb_signal)
# ------------------------------------------------------------------------------
def _set_filter_type(self, enb_signal=False):
""""
Triggered when cmbFilterType (IIR, FIR, ...) is changed:
- read filter type ft and copy it to fb.fil[0]['ft'] and self.ft
- (re)construct design method combo, adding
displayed text (e.g. "Chebyshev 1") and hidden data (e.g. "cheby1")
"""
# Read out current setting of comboBox and convert to string
fb.fil[0]['ft'] = self.ft = qget_cmb_box(self.cmbFilterType)
#
logger.debug("InputFilter.set_filter_type triggered: {0}".format(
self.ft))
# ---------------------------------------------------------------
# Get all available design methods for new ft from fil_tree and
# - Collect them in fc_list
# - Rebuild design method combobox entries for new ft setting:
# The combobox is populated with the "long name",
# the internal name is stored in comboBox.itemData
self.cmbFilterClass.blockSignals(True)
self.cmbFilterClass.clear()
fc_list = []
for fc in sorted(fb.fil_tree[self.rt][self.ft]):
self.cmbFilterClass.addItem(fb.filter_classes[fc]['name'], fc)
fc_list.append(fc)
logger.debug("fc_list: {0}\n{1}".format(fc_list, fb.fil[0]['fc']))
# Does new ft also provide the previous design method (e.g. ellip)?
# Has filter been instantiated?
if fb.fil[0]['fc'] in fc_list and ff.fil_inst:
# yes, set same fc as before
fc_idx = self.cmbFilterClass.findText(
fb.filter_classes[fb.fil[0]['fc']]['name'])
logger.debug("fc_idx : %s", fc_idx)
self.cmbFilterClass.setCurrentIndex(fc_idx)
else:
self.cmbFilterClass.setCurrentIndex(0) # no, set index 0
self.cmbFilterClass.blockSignals(False)
self._set_design_method(enb_signal)
# ------------------------------------------------------------------------------
def _set_design_method(self, enb_signal=False):
"""
Triggered when cmbFilterClass (cheby1, ...) is changed:
- read design method fc and copy it to fb.fil[0]
- create / update global filter instance fb.fil_inst of fc class
- update dynamic widgets (if fc has changed and if there are any)
- call load filter order
"""
fb.fil[0]['fc'] = fc = qget_cmb_box(self.cmbFilterClass)
if fc != self.fc_last: # fc has changed:
# when filter has been changed, try to destroy dynamic widgets of last fc:
if self.fc_last:
self._destruct_dyn_widgets()
# ==================================================================
"""
Create new instance of the selected filter class, accessible via
its handle fb.fil_inst
"""
err = ff.fil_factory.create_fil_inst(fc)
logger.debug(f"InputFilter.set_design_method triggered: {fc}\n"
f"Returned error code {err}")
# ==================================================================
# Check whether new design method also provides the old filter order
# method. If yes, don't change it, else set first available
# filter order method
if fb.fil[0]['fo'] not in fb.fil_tree[self.rt][self.ft][fc].keys():
fb.fil[0].update({'fo': {}})
# explicit list(dict.keys()) needed for Python 3
fb.fil[0]['fo'] = list(
fb.fil_tree[self.rt][self.ft][fc].keys())[0]
# =============================================================================
# logger.debug("selFilter = %s"
# "filterTree[fc] = %s"
# "filterTree[fc].keys() = %s"
# %(fb.fil[0], fb.fil_tree[self.rt][self.ft][fc],\
# fb.fil_tree[self.rt][self.ft][fc].keys()
# ))
#
# =============================================================================
# construct dyn. subwidgets if available
if hasattr(ff.fil_inst, 'construct_UI'):
self._construct_dyn_widgets()
self.fc_last = fb.fil[0]['fc']
self.load_filter_order(enb_signal)
# ------------------------------------------------------------------------------
def load_filter_order(self, enb_signal=False):
"""
Called by set_design_method or from InputSpecs (with enb_signal = False),
load filter order setting from fb.fil[0] and update widgets
"""
# collect dict_keys of available filter order [fo] methods for selected
# design method [fc] from fil_tree (explicit list() needed for Python 3)
fo_dict = fb.fil_tree[fb.fil[0]['rt']][fb.fil[0]['ft']][fb.fil[0]
['fc']]
fo_list = list(fo_dict.keys())
# is currently selected fo setting available for (new) fc ?
if fb.fil[0]['fo'] in fo_list:
self.fo = fb.fil[0]['fo'] # keep current setting
else:
self.fo = fo_list[0] # use first list entry from filterTree
fb.fil[0]['fo'] = self.fo # and update fo method
# check whether fo widget is active, disabled or invisible
if 'fo' in fo_dict[self.fo] and len(fo_dict[self.fo]['fo']) > 1:
status = fo_dict[self.fo]['fo'][0]
else:
status = 'i'
# Determine which subwidgets are __visible__
self.chkMinOrder.setVisible('min' in fo_list)
self.ledOrderN.setVisible(status in {'a', 'd'})
self.lblOrderN.setVisible(status in {'a', 'd'})
# Determine which subwidgets are __enabled__
self.chkMinOrder.setChecked(fb.fil[0]['fo'] == 'min')
self.ledOrderN.setText(str(fb.fil[0]['N']))
self.ledOrderN.setEnabled(not self.chkMinOrder.isChecked()
and status == 'a')
self.lblOrderN.setEnabled(not self.chkMinOrder.isChecked()
and status == 'a')
if enb_signal:
logger.debug("Emit 'filt_changed'")
self.emit({'filt_changed': 'filter_type'})
# ------------------------------------------------------------------------------
def _set_filter_order(self, enb_signal=False):
"""
Triggered when either ledOrderN or chkMinOrder are edited:
- copy settings to fb.fil[0]
- emit 'filt_changed' if enb_signal is True
"""
# Determine which subwidgets are _enabled_
if self.chkMinOrder.isVisible():
self.ledOrderN.setEnabled(not self.chkMinOrder.isChecked())
self.lblOrderN.setEnabled(not self.chkMinOrder.isChecked())
if self.chkMinOrder.isChecked() is True:
# update in case N has been changed outside this class
self.ledOrderN.setText(str(fb.fil[0]['N']))
fb.fil[0].update({'fo': 'min'})
else:
fb.fil[0].update({'fo': 'man'})
else:
self.lblOrderN.setEnabled(self.fo == 'man')
self.ledOrderN.setEnabled(self.fo == 'man')
# read manual filter order, convert to positive integer and store it
# in filter dictionary.
ordn = safe_eval(self.ledOrderN.text(),
fb.fil[0]['N'],
return_type='int',
sign='pos')
ordn = ordn if ordn > 0 else 1
self.ledOrderN.setText(str(ordn))
fb.fil[0].update({'N': ordn})
if enb_signal:
logger.debug("Emit 'filt_changed'")
self.emit({'filt_changed': 'filter_order_widget'})
# ------------------------------------------------------------------------------
def _destruct_dyn_widgets(self):
"""
Delete the dynamically created filter design subwidget (if there is one)
see http://stackoverflow.com/questions/13827798/proper-way-to-cleanup-
widgets-in-pyqt
This does NOT work when the subwidgets to be deleted and created are
identical, as the deletion is only performed when the current scope has
been left (?)! Hence, it is necessary to skip this method when the new
design method is the same as the old one.
"""
if hasattr(ff.fil_inst, 'wdg_fil'):
# not needed, connection is destroyed automatically
# ff.fil_inst.sig_tx.disconnect()
try:
# remove widget from layout
self.layHDynWdg.removeWidget(self.dyn_wdg_fil)
# delete UI widget when scope has been left
self.dyn_wdg_fil.deleteLater()
except AttributeError as e:
logger.error("Could not destruct_UI!\n{0}".format(e))
ff.fil_inst.deleteLater(
) # delete QWidget when scope has been left
# ------------------------------------------------------------------------------
def _construct_dyn_widgets(self):
"""
Create filter widget UI dynamically (if the filter routine has one) and
connect its sig_tx signal to sig_tx in this scope.
"""
ff.fil_inst.construct_UI()
if hasattr(ff.fil_inst, 'wdg_fil'):
try:
self.dyn_wdg_fil = getattr(ff.fil_inst, 'wdg_fil')
self.layHDynWdg.addWidget(self.dyn_wdg_fil, stretch=1)
except AttributeError as e:
logger.warning(e)
if hasattr(ff.fil_inst, 'sig_tx'):
ff.fil_inst.sig_tx.connect(self.sig_tx)
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.bfont = QFont()
self.bfont.setBold(True)
self.chk_auto_N = QCheckBox(self)
self.chk_auto_N.setChecked(False)
self.chk_auto_N.setToolTip(
"Use number of points from calling routine.")
self.lbl_auto_N = QLabel("Auto " + to_html("N", frmt='i'))
self.led_N = QLineEdit(self)
self.led_N.setText(str(self.N))
self.led_N.setMaximumWidth(70)
self.led_N.setToolTip("<span>Number of window data points.</span>")
self.chk_log_t = QCheckBox("Log", self)
self.chk_log_t.setChecked(False)
self.chk_log_t.setToolTip("Display in dB")
self.led_log_bottom_t = QLineEdit(self)
self.led_log_bottom_t.setText(str(self.bottom_t))
self.led_log_bottom_t.setMaximumWidth(50)
self.led_log_bottom_t.setEnabled(self.chk_log_t.isChecked())
self.led_log_bottom_t.setToolTip(
"<span>Minimum display value for log. scale.</span>")
self.lbl_log_bottom_t = QLabel("dB", self)
self.lbl_log_bottom_t.setEnabled(self.chk_log_t.isChecked())
self.chk_norm_f = QCheckBox("Norm", self)
self.chk_norm_f.setChecked(True)
self.chk_norm_f.setToolTip(
"Normalize window spectrum for a maximum of 1.")
self.chk_half_f = QCheckBox("Half", self)
self.chk_half_f.setChecked(True)
self.chk_half_f.setToolTip(
"Display window spectrum in the range 0 ... 0.5 f_S.")
self.chk_log_f = QCheckBox("Log", self)
self.chk_log_f.setChecked(True)
self.chk_log_f.setToolTip("Display in dB")
self.led_log_bottom_f = QLineEdit(self)
self.led_log_bottom_f.setText(str(self.bottom_f))
self.led_log_bottom_f.setMaximumWidth(50)
self.led_log_bottom_f.setEnabled(self.chk_log_f.isChecked())
self.led_log_bottom_f.setToolTip(
"<span>Minimum display value for log. scale.</span>")
self.lbl_log_bottom_f = QLabel("dB", self)
self.lbl_log_bottom_f.setEnabled(self.chk_log_f.isChecked())
layHControls = QHBoxLayout()
layHControls.addWidget(self.chk_auto_N)
layHControls.addWidget(self.lbl_auto_N)
layHControls.addWidget(self.led_N)
layHControls.addStretch(1)
layHControls.addWidget(self.chk_log_t)
layHControls.addWidget(self.led_log_bottom_t)
layHControls.addWidget(self.lbl_log_bottom_t)
layHControls.addStretch(10)
layHControls.addWidget(self.chk_norm_f)
layHControls.addStretch(1)
layHControls.addWidget(self.chk_half_f)
layHControls.addStretch(1)
layHControls.addWidget(self.chk_log_f)
layHControls.addWidget(self.led_log_bottom_f)
layHControls.addWidget(self.lbl_log_bottom_f)
self.tblWinProperties = QTableWidget(self.tbl_rows, self.tbl_cols,
self)
self.tblWinProperties.setAlternatingRowColors(True)
self.tblWinProperties.verticalHeader().setVisible(False)
self.tblWinProperties.horizontalHeader().setVisible(False)
self._init_table(self.tbl_rows, self.tbl_cols, " ")
self.txtInfoBox = QTextBrowser(self)
#----------------------------------------------------------------------
# ### frmControls ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
#----------------------------------------------------------------------
# ### mplwidget ###
#
# main widget: Layout layVMainMpl (VBox) is defined with MplWidget,
# additional widgets can be added (like self.frmControls)
# The widget encompasses all other widgets.
#----------------------------------------------------------------------
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
#----------------------------------------------------------------------
# ### frmInfo ###
#
# This widget encompasses the text info box and the table with window
# parameters.
#----------------------------------------------------------------------
layVInfo = QVBoxLayout(self)
layVInfo.addWidget(self.tblWinProperties)
layVInfo.addWidget(self.txtInfoBox)
self.frmInfo = QFrame(self)
self.frmInfo.setObjectName("frmInfo")
self.frmInfo.setLayout(layVInfo)
#----------------------------------------------------------------------
# ### splitter ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
splitter = QSplitter(self)
splitter.setOrientation(Qt.Vertical)
splitter.addWidget(self.mplwidget)
splitter.addWidget(self.frmInfo)
# setSizes uses absolute pixel values, but can be "misused" by specifying values
# that are way too large: in this case, the space is distributed according
# to the _ratio_ of the values:
splitter.setSizes([3000, 1000])
layVMain = QVBoxLayout()
layVMain.addWidget(splitter)
self.setLayout(layVMain)
#----------------------------------------------------------------------
# Set subplots
#
self.ax = self.mplwidget.fig.subplots(nrows=1, ncols=2)
self.ax_t = self.ax[0]
self.ax_f = self.ax[1]
self.draw() # initial drawing
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.chk_log_f.clicked.connect(self.update_view)
self.chk_log_t.clicked.connect(self.update_view)
self.led_log_bottom_t.editingFinished.connect(self.update_bottom)
self.led_log_bottom_f.editingFinished.connect(self.update_bottom)
self.chk_auto_N.clicked.connect(self.calc_N)
self.led_N.editingFinished.connect(self.draw)
self.chk_norm_f.clicked.connect(self.draw)
self.chk_half_f.clicked.connect(self.update_view)
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
self.tblWinProperties.itemClicked.connect(self._handle_item_clicked)
class MA(QWidget):
FRMT = (
'zpk', 'ba'
) # output format(s) of filter design routines 'zpk' / 'ba' / 'sos'
info = """
**Moving average filters**
can only be specified via their length and the number of cascaded sections.
The minimum order to obtain a certain attenuation at a given frequency is
calculated via the si function.
Moving average filters can be implemented very efficiently in hard- and software
as they require no multiplications but only addition and subtractions. Probably
only the lowpass is really useful, as the other response types only filter out resp.
leave components at ``f_S/4`` (bandstop resp. bandpass) resp. leave components
near ``f_S/2`` (highpass).
**Design routines:**
``ma.calc_ma()``
"""
sig_tx = pyqtSignal(object)
from pyfda.libs.pyfda_qt_lib import emit
def __init__(self):
QWidget.__init__(self)
self.delays = 12 # number of delays per stage
self.stages = 1 # number of stages
self.ft = 'FIR'
self.rt_dicts = ()
# Common data for all filter response types:
# This data is merged with the entries for individual response types
# (common data comes first):
self.rt_dict = {
'COM': {
'man': {
'fo': ('d', 'N'),
'msg':
('a',
"Enter desired order (= delays) <b><i>M</i></b> per stage and"
" the number of <b>stages</b>. Target frequencies and amplitudes"
" are only used for comparison, not for the design itself."
)
},
'min': {
'fo': ('d', 'N'),
'msg':
('a',
"Enter desired attenuation <b><i>A<sub>SB</sub></i></b> at "
"the corner of the stop band <b><i>F<sub>SB</sub></i></b>. "
"Choose the number of <b>stages</b>, the minimum order <b><i>M</i></b> "
"per stage will be determined. Passband specs are not regarded."
)
}
},
'LP': {
'man': {
'tspecs': ('u', {
'frq': ('u', 'F_PB', 'F_SB'),
'amp': ('u', 'A_PB', 'A_SB')
})
},
'min': {
'tspecs': ('a', {
'frq': ('a', 'F_PB', 'F_SB'),
'amp': ('a', 'A_PB', 'A_SB')
})
}
},
'HP': {
'man': {
'tspecs': ('u', {
'frq': ('u', 'F_SB', 'F_PB'),
'amp': ('u', 'A_SB', 'A_PB')
})
},
'min': {
'tspecs': ('a', {
'frq': ('a', 'F_SB', 'F_PB'),
'amp': ('a', 'A_SB', 'A_PB')
})
},
},
'BS': {
'man': {
'tspecs': ('u', {
'frq': ('u', 'F_PB', 'F_SB', 'F_SB2', 'F_PB2'),
'amp': ('u', 'A_PB', 'A_SB', 'A_PB2')
}),
'msg':
('a', "\nThis is not a proper band stop, it only lets pass"
" frequency components around DC and <i>f<sub>S</sub></i>/2."
" The order needs to be odd."),
}
},
'BP': {
'man': {
'tspecs': ('u', {
'frq': (
'u',
'F_SB',
'F_PB',
'F_PB2',
'F_SB2',
),
'amp': ('u', 'A_SB', 'A_PB', 'A_SB2')
}),
'msg':
('a', "\nThis is not a proper band pass, it only lets pass"
" frequency components around <i>f<sub>S</sub></i>/4."
" The order needs to be odd."),
}
},
}
self.info_doc = []
# self.info_doc.append('remez()\n=======')
# self.info_doc.append(sig.remez.__doc__)
# self.info_doc.append('remezord()\n==========')
# self.info_doc.append(remezord.__doc__)
#--------------------------------------------------------------------------
def construct_UI(self):
"""
Create additional subwidget(s) needed for filter design:
These subwidgets are instantiated dynamically when needed in
select_filter.py using the handle to the filter instance, fb.fil_inst.
"""
self.lbl_delays = QLabel("<b><i>M =</ i></ b>", self)
self.lbl_delays.setObjectName('wdg_lbl_ma_0')
self.led_delays = QLineEdit(self)
try:
self.led_delays.setText(str(fb.fil[0]['N']))
except KeyError:
self.led_delays.setText(str(self.delays))
self.led_delays.setObjectName('wdg_led_ma_0')
self.led_delays.setToolTip("Set number of delays per stage")
self.lbl_stages = QLabel("<b>Stages =</ b>", self)
self.lbl_stages.setObjectName('wdg_lbl_ma_1')
self.led_stages = QLineEdit(self)
self.led_stages.setText(str(self.stages))
self.led_stages.setObjectName('wdg_led_ma_1')
self.led_stages.setToolTip("Set number of stages ")
self.chk_norm = QCheckBox("Normalize", self)
self.chk_norm.setChecked(True)
self.chk_norm.setObjectName('wdg_chk_ma_2')
self.chk_norm.setToolTip("Normalize to| H_max = 1|")
self.layHWin = QHBoxLayout()
self.layHWin.setObjectName('wdg_layGWin')
self.layHWin.addWidget(self.lbl_delays)
self.layHWin.addWidget(self.led_delays)
self.layHWin.addStretch(1)
self.layHWin.addWidget(self.lbl_stages)
self.layHWin.addWidget(self.led_stages)
self.layHWin.addStretch(1)
self.layHWin.addWidget(self.chk_norm)
self.layHWin.setContentsMargins(0, 0, 0, 0)
# Widget containing all subwidgets (cmbBoxes, Labels, lineEdits)
self.wdg_fil = QWidget(self)
self.wdg_fil.setObjectName('wdg_fil')
self.wdg_fil.setLayout(self.layHWin)
#----------------------------------------------------------------------
# SIGNALS & SLOTs
#----------------------------------------------------------------------
self.led_delays.editingFinished.connect(self._update_UI)
self.led_stages.editingFinished.connect(self._update_UI)
# fires when edited line looses focus or when RETURN is pressed
self.chk_norm.clicked.connect(self._update_UI)
#----------------------------------------------------------------------
self._load_dict() # get initial / last setting from dictionary
self._update_UI()
def _load_dict(self):
"""
Reload parameter(s) from filter dictionary (if they exist) and set
corresponding UI elements. load_dict() is called upon initialization
and when the filter is loaded from disk.
"""
if 'wdg_fil' in fb.fil[0] and 'ma' in fb.fil[0]['wdg_fil']:
wdg_fil_par = fb.fil[0]['wdg_fil']['ma']
if 'delays' in wdg_fil_par:
self.delays = wdg_fil_par['delays']
self.led_delays.setText(str(self.delays))
if 'stages' in wdg_fil_par:
self.stages = wdg_fil_par['stages']
self.led_stages.setText(str(self.stages))
if 'normalize' in wdg_fil_par:
self.chk_norm.setChecked(wdg_fil_par['normalize'])
def _update_UI(self):
"""
Update UI when line edit field is changed (here, only the text is read
and converted to integer) and resize the textfields according to content.
"""
self.delays = safe_eval(self.led_delays.text(),
self.delays,
return_type='int',
sign='pos')
self.led_delays.setText(str(self.delays))
self.stages = safe_eval(self.led_stages.text(),
self.stages,
return_type='int',
sign='pos')
self.led_stages.setText(str(self.stages))
self._store_entries()
def _store_entries(self):
"""
Store parameter settings in filter dictionary. Called from _update_UI()
and _save()
"""
if not 'wdg_fil' in fb.fil[0]:
fb.fil[0].update({'wdg_fil': {}})
fb.fil[0]['wdg_fil'].update({
'ma': {
'delays': self.delays,
'stages': self.stages,
'normalize': self.chk_norm.isChecked()
}
})
# sig_tx -> select_filter -> filter_specs
self.emit({'filt_changed': 'ma'})
def _get_params(self, fil_dict):
"""
Translate parameters from the passed dictionary to instance
parameters, scaling / transforming them if needed.
"""
# N is total order, L is number of taps per stage
self.F_SB = fil_dict['F_SB']
self.A_SB = fil_dict['A_SB']
def _save(self, fil_dict):
"""
Save MA-filters both in 'zpk' and 'ba' format; no conversion has to be
performed except maybe deleting an 'sos' entry from an earlier
filter design.
"""
if 'zpk' in self.FRMT:
fil_save(fil_dict, self.zpk, 'zpk', __name__, convert=False)
if 'ba' in self.FRMT:
fil_save(fil_dict, self.b, 'ba', __name__, convert=False)
fil_convert(fil_dict, self.FRMT)
# always update filter dict and LineEdit, in case the design algorithm
# has changed the number of delays:
fil_dict['N'] = self.delays * self.stages # updated filter order
self.led_delays.setText(str(self.delays)) # updated number of delays
self._store_entries()
def calc_ma(self, fil_dict, rt='LP'):
"""
Calculate coefficients and P/Z for moving average filter based on
filter length L = N + 1 and number of cascaded stages and save the
result in the filter dictionary.
"""
b = 1.
k = 1.
L = self.delays + 1
if rt == 'LP':
b0 = np.ones(L) # h[n] = {1; 1; 1; ...}
i = np.arange(1, L)
norm = L
elif rt == 'HP':
b0 = np.ones(L)
b0[::2] = -1. # h[n] = {1; -1; 1; -1; ...}
i = np.arange(L)
if (L % 2 == 0): # even order, remove middle element
i = np.delete(i, round(L / 2.))
else: # odd order, shift by 0.5 and remove middle element
i = np.delete(i, int(L / 2.)) + 0.5
norm = L
elif rt == 'BP':
# N is even, L is odd
b0 = np.ones(L)
b0[1::2] = 0
b0[::4] = -1 # h[n] = {1; 0; -1; 0; 1; ... }
L = L + 1
i = np.arange(L) # create N + 2 zeros around the unit circle, ...
# ... remove first and middle element and rotate by L / 4
i = np.delete(i, [0, L // 2]) + L / 4
norm = np.sum(abs(b0))
elif rt == 'BS':
# N is even, L is odd
b0 = np.ones(L)
b0[1::2] = 0
L = L + 1
i = np.arange(
L) # create N + 2 zeros around the unit circle and ...
i = np.delete(i,
[0, L // 2]) # ... remove first and middle element
norm = np.sum(b0)
if self.delays > 1000:
if not qfilter_warning(None, self.delays * self.stages,
"Moving Average"):
return -1
z0 = np.exp(-2j * np.pi * i / L)
# calculate filter for multiple cascaded stages
for i in range(self.stages):
b = np.convolve(b0, b)
z = np.repeat(z0, self.stages)
# normalize filter to |H_max| = 1 if checked:
if self.chk_norm.isChecked():
b = b / (norm**self.stages)
k = 1. / norm**self.stages
p = np.zeros(len(z))
# store in class attributes for the _save method
self.zpk = [z, p, k]
self.b = b
self._save(fil_dict)
def LPman(self, fil_dict):
self._get_params(fil_dict)
self.calc_ma(fil_dict, rt='LP')
def LPmin(self, fil_dict):
self._get_params(fil_dict)
self.delays = int(
np.ceil(
1 /
(self.A_SB**(1 / self.stages) * np.sin(self.F_SB * np.pi))))
self.calc_ma(fil_dict, rt='LP')
def HPman(self, fil_dict):
self._get_params(fil_dict)
self.calc_ma(fil_dict, rt='HP')
def HPmin(self, fil_dict):
self._get_params(fil_dict)
self.delays = int(
np.ceil(1 / (self.A_SB**(1 / self.stages) * np.sin(
(0.5 - self.F_SB) * np.pi))))
self.calc_ma(fil_dict, rt='HP')
def BSman(self, fil_dict):
self._get_params(fil_dict)
self.delays = ceil_odd(self.delays) # enforce odd order
self.calc_ma(fil_dict, rt='BS')
def BPman(self, fil_dict):
self._get_params(fil_dict)
self.delays = ceil_odd(self.delays) # enforce odd order
self.calc_ma(fil_dict, rt='BP')
class Input_Info(QWidget):
"""
Create widget for displaying infos about filter specs and filter design method
"""
sig_rx = pyqtSignal(object) # incoming signals from input_tab_widgets
def __init__(self, parent):
super(Input_Info, self).__init__(parent)
self.tab_label = 'Info'
self.tool_tip = (
"<span>Display the achieved filter specifications"
" and more info about the filter design algorithm.</span>")
self._construct_UI()
self.load_dict()
def process_sig_rx(self, dict_sig=None):
"""
Process signals coming from sig_rx
"""
logger.debug("Processing {0}: {1}".format(
type(dict_sig).__name__, dict_sig))
if 'data_changed' in dict_sig or 'view_changed' in dict_sig or 'specs_changed' in dict_sig:
self.load_dict()
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Checkboxes for selecting the info to be displayed
- A large text window for displaying infos about the filter design
algorithm
"""
bfont = QFont()
bfont.setBold(True)
# ============== UI Layout =====================================
# widget / subwindow for filter infos
self.chkFiltPerf = QCheckBox("H(f)", self)
self.chkFiltPerf.setChecked(True)
self.chkFiltPerf.setToolTip(
"Display frequency response at test frequencies.")
self.chkDocstring = QCheckBox("Doc$", self)
self.chkDocstring.setChecked(False)
self.chkDocstring.setToolTip(
"Display docstring from python filter method.")
self.chkRichText = QCheckBox("RTF", self)
self.chkRichText.setChecked(HAS_DOCUTILS)
self.chkRichText.setEnabled(HAS_DOCUTILS)
self.chkRichText.setToolTip(
"Render documentation in Rich Text Format.")
self.chkFiltDict = QCheckBox("FiltDict", self)
self.chkFiltDict.setToolTip("Show filter dictionary for debugging.")
self.chkFiltTree = QCheckBox("FiltTree", self)
self.chkFiltTree.setToolTip("Show filter tree for debugging.")
self.layHChkBoxes = QHBoxLayout()
self.layHChkBoxes.addWidget(self.chkFiltPerf)
self.layHChkBoxes.addStretch(1)
self.layHChkBoxes.addWidget(self.chkDocstring)
self.layHChkBoxes.addStretch(1)
self.layHChkBoxes.addWidget(self.chkRichText)
self.layHChkBoxes.addStretch(1)
self.layHChkBoxes.addWidget(self.chkFiltDict)
self.layHChkBoxes.addStretch(1)
self.layHChkBoxes.addWidget(self.chkFiltTree)
self.frmMain = QFrame(self)
self.frmMain.setLayout(self.layHChkBoxes)
self.tblFiltPerf = QTableWidget(self)
self.tblFiltPerf.setAlternatingRowColors(True)
# self.tblFiltPerf.verticalHeader().setVisible(False)
self.tblFiltPerf.horizontalHeader().setHighlightSections(False)
self.tblFiltPerf.horizontalHeader().setFont(bfont)
self.tblFiltPerf.verticalHeader().setHighlightSections(False)
self.tblFiltPerf.verticalHeader().setFont(bfont)
self.txtFiltInfoBox = QTextBrowser(self)
self.txtFiltDict = QTextBrowser(self)
self.txtFiltTree = QTextBrowser(self)
layVMain = QVBoxLayout()
layVMain.addWidget(self.frmMain)
# layVMain.addLayout(self.layHChkBoxes)
splitter = QSplitter(self)
splitter.setOrientation(Qt.Vertical)
splitter.addWidget(self.tblFiltPerf)
splitter.addWidget(self.txtFiltInfoBox)
splitter.addWidget(self.txtFiltDict)
splitter.addWidget(self.txtFiltTree)
# setSizes uses absolute pixel values, but can be "misused" by specifying values
# that are way too large: in this case, the space is distributed according
# to the _ratio_ of the values:
splitter.setSizes([3000, 10000, 1000, 1000])
layVMain.addWidget(splitter)
layVMain.setContentsMargins(*params['wdg_margins'])
self.setLayout(layVMain)
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.chkFiltPerf.clicked.connect(self._show_filt_perf)
self.chkFiltDict.clicked.connect(self._show_filt_dict)
self.chkFiltTree.clicked.connect(self._show_filt_tree)
self.chkDocstring.clicked.connect(self._show_doc)
self.chkRichText.clicked.connect(self._show_doc)
#------------------------------------------------------------------------------
def load_dict(self):
"""
update docs and filter performance
"""
self._show_doc()
self._show_filt_perf()
self._show_filt_dict()
self._show_filt_tree()
#------------------------------------------------------------------------------
def _show_doc(self):
"""
Display info from filter design file and docstring
"""
if hasattr(ff.fil_inst, 'info'):
if self.chkRichText.isChecked():
self.txtFiltInfoBox.setText(
publish_string(
self._clean_doc(ff.fil_inst.info),
writer_name='html',
settings_overrides={'output_encoding': 'unicode'}))
else:
self.txtFiltInfoBox.setText(textwrap.dedent(ff.fil_inst.info))
else:
self.txtFiltInfoBox.setText("")
if self.chkDocstring.isChecked() and hasattr(ff.fil_inst, 'info_doc'):
if self.chkRichText.isChecked():
self.txtFiltInfoBox.append(
'<hr /><b>Python module docstring:</b>\n')
for doc in ff.fil_inst.info_doc:
self.txtFiltInfoBox.append(
publish_string(
self._clean_doc(doc),
writer_name='html',
settings_overrides={'output_encoding': 'unicode'}))
else:
self.txtFiltInfoBox.append('\nPython module docstring:\n')
for doc in ff.fil_inst.info_doc:
self.txtFiltInfoBox.append(self._clean_doc(doc))
self.txtFiltInfoBox.moveCursor(QTextCursor.Start)
def _clean_doc(self, doc):
"""
Remove uniform number of leading blanks from docstrings for subsequent
processing of rich text. The first line is treated differently, _all_
leading blanks are removed (if any). This allows for different formats
of docstrings.
"""
lines = doc.splitlines()
result = lines[0].lstrip() + "\n" + textwrap.dedent("\n".join(
lines[1:]))
return result
#------------------------------------------------------------------------------
def _show_filt_perf(self):
"""
Print filter properties in a table at frequencies of interest. When
specs are violated, colour the table entry in red.
"""
antiC = False
def _find_min_max(self, f_start, f_stop, unit='dB'):
"""
Find minimum and maximum magnitude and the corresponding frequencies
for the filter defined in the filter dict in a given frequency band
[f_start, f_stop].
"""
w = np.linspace(f_start, f_stop, params['N_FFT']) * 2 * np.pi
[w, H] = sig.freqz(bb, aa, worN=w)
# add antiCausals if we have them
if (antiC):
#
# Evaluate transfer function of anticausal half on the same freq grid.
#
wa, ha = sig.freqz(bbA, aaA, worN=w)
ha = ha.conjugate()
#
# Total transfer function is the product
#
H = H * ha
f = w / (2.0 * pi) # frequency normalized to f_S
H_abs = abs(H)
H_max = max(H_abs)
H_min = min(H_abs)
F_max = f[np.argmax(H_abs)] # find the frequency where H_abs
F_min = f[np.argmin(H_abs)] # becomes max resp. min
if unit == 'dB':
H_max = 20 * log10(H_max)
H_min = 20 * log10(H_min)
return F_min, H_min, F_max, H_max
#------------------------------------------------------------------
self.tblFiltPerf.setVisible(self.chkFiltPerf.isChecked())
if self.chkFiltPerf.isChecked():
bb = fb.fil[0]['ba'][0]
aa = fb.fil[0]['ba'][1]
#'rpk' means nonCausal filter
if 'rpk' in fb.fil[0]:
antiC = True
bbA = fb.fil[0]['baA'][0]
aaA = fb.fil[0]['baA'][1]
bbA = bbA.conjugate()
aaA = aaA.conjugate()
f_S = fb.fil[0]['f_S']
f_lbls = []
f_vals = []
a_lbls = []
a_targs = []
a_targs_dB = []
a_test = []
ft = fb.fil[0]['ft'] # get filter type ('IIR', 'FIR')
unit = fb.fil[0]['amp_specs_unit']
unit = 'dB' # fix this for the moment
# construct pairs of corner frequency and corresponding amplitude
# labels in ascending frequency for each response type
if fb.fil[0]['rt'] in {'LP', 'HP', 'BP', 'BS', 'HIL'}:
if fb.fil[0]['rt'] == 'LP':
f_lbls = ['F_PB', 'F_SB']
a_lbls = ['A_PB', 'A_SB']
elif fb.fil[0]['rt'] == 'HP':
f_lbls = ['F_SB', 'F_PB']
a_lbls = ['A_SB', 'A_PB']
elif fb.fil[0]['rt'] == 'BP':
f_lbls = ['F_SB', 'F_PB', 'F_PB2', 'F_SB2']
a_lbls = ['A_SB', 'A_PB', 'A_PB', 'A_SB2']
elif fb.fil[0]['rt'] == 'BS':
f_lbls = ['F_PB', 'F_SB', 'F_SB2', 'F_PB2']
a_lbls = ['A_PB', 'A_SB', 'A_SB', 'A_PB2']
elif fb.fil[0]['rt'] == 'HIL':
f_lbls = ['F_PB', 'F_PB2']
a_lbls = ['A_PB', 'A_PB']
# Try to get lists of frequency / amplitude specs from the filter dict
# that correspond to the f_lbls / a_lbls pairs defined above
# When one of the labels doesn't exist in the filter dict, delete
# all corresponding amplitude and frequency entries.
err = [False] * len(f_lbls) # initialize error list
f_vals = []
a_targs = []
for i in range(len(f_lbls)):
try:
f = fb.fil[0][f_lbls[i]]
f_vals.append(f)
except KeyError as e:
f_vals.append('')
err[i] = True
logger.debug(e)
try:
a = fb.fil[0][a_lbls[i]]
a_dB = lin2unit(fb.fil[0][a_lbls[i]], ft, a_lbls[i],
unit)
a_targs.append(a)
a_targs_dB.append(a_dB)
except KeyError as e:
a_targs.append('')
a_targs_dB.append('')
err[i] = True
logger.debug(e)
for i in range(len(f_lbls)):
if err[i]:
del f_lbls[i]
del f_vals[i]
del a_lbls[i]
del a_targs[i]
del a_targs_dB[i]
f_vals = np.asarray(f_vals) # convert to numpy array
logger.debug("F_test_labels = %s" % f_lbls)
# Calculate frequency response at test frequencies
[w_test,
a_test] = sig.freqz(bb, aa,
2.0 * pi * f_vals.astype(np.float))
# add antiCausals if we have them
if (antiC):
wa, ha = sig.freqz(bbA, aaA,
2.0 * pi * f_vals.astype(np.float))
ha = ha.conjugate()
a_test = a_test * ha
(F_min, H_min, F_max, H_max) = _find_min_max(self, 0, 1, unit='V')
# append frequencies and values for min. and max. filter reponse to
# test vector
f_lbls += ['Min.', 'Max.']
# QTableView does not support direct formatting, use QLabel
f_vals = np.append(f_vals, [F_min, F_max])
a_targs = np.append(a_targs, [np.nan, np.nan])
a_targs_dB = np.append(a_targs_dB, [np.nan, np.nan])
a_test = np.append(a_test, [H_min, H_max])
# calculate response of test frequencies in dB
a_test_dB = -20 * log10(abs(a_test))
ft = fb.fil[0][
'ft'] # get filter type ('IIR', 'FIR') for dB <-> lin conversion
# unit = fb.fil[0]['amp_specs_unit']
unit = 'dB' # make this fixed for the moment
# build a list with the corresponding target specs:
a_targs_pass = []
eps = 1e-3
for i in range(len(f_lbls)):
if 'PB' in f_lbls[i]:
a_targs_pass.append((a_test_dB[i] - a_targs_dB[i]) < eps)
a_test[i] = 1 - abs(a_test[i])
elif 'SB' in f_lbls[i]:
a_targs_pass.append(a_test_dB[i] >= a_targs_dB[i])
else:
a_targs_pass.append(True)
self.targs_spec_passed = np.all(a_targs_pass)
logger.debug("H_targ = {0}\n"
"H_test = {1}\n"
"H_test_dB = {2}\n"
"F_test = {3}\n"
"H_targ_pass = {4}\n"
"passed: {5}\n".format(a_targs, a_test, a_test_dB,
f_vals, a_targs_pass,
self.targs_spec_passed))
self.tblFiltPerf.setRowCount(len(a_test)) # number of table rows
self.tblFiltPerf.setColumnCount(5) # number of table columns
self.tblFiltPerf.setHorizontalHeaderLabels([
'f/{0:s}'.format(fb.fil[0]['freq_specs_unit']), 'Spec\n(dB)',
'|H(f)|\n(dB)', 'Spec', '|H(f)|'
])
self.tblFiltPerf.setVerticalHeaderLabels(f_lbls)
for row in range(len(a_test)):
self.tblFiltPerf.setItem(
row, 0,
QTableWidgetItem(str('{0:.4g}'.format(f_vals[row] * f_S))))
self.tblFiltPerf.setItem(
row, 1,
QTableWidgetItem(str('%2.3g' % (-a_targs_dB[row]))))
self.tblFiltPerf.setItem(
row, 2, QTableWidgetItem(str('%2.3f' % (-a_test_dB[row]))))
if a_targs[row] < 0.01:
self.tblFiltPerf.setItem(
row, 3, QTableWidgetItem(str('%.3e' % (a_targs[row]))))
else:
self.tblFiltPerf.setItem(
row, 3,
QTableWidgetItem(str('%2.4f' % (a_targs[row]))))
if a_test[row] < 0.01:
self.tblFiltPerf.setItem(
row, 4,
QTableWidgetItem(str('%.3e' % (abs(a_test[row])))))
else:
self.tblFiltPerf.setItem(
row, 4,
QTableWidgetItem(str('%.4f' % (abs(a_test[row])))))
if not a_targs_pass[row]:
self.tblFiltPerf.item(row,
1).setBackground(QtGui.QColor('red'))
self.tblFiltPerf.item(row,
3).setBackground(QtGui.QColor('red'))
self.tblFiltPerf.resizeColumnsToContents()
self.tblFiltPerf.resizeRowsToContents()
#------------------------------------------------------------------------------
def _show_filt_dict(self):
"""
Print filter dict for debugging
"""
self.txtFiltDict.setVisible(self.chkFiltDict.isChecked())
fb_sorted = [
str(key) + ' : ' + str(fb.fil[0][key])
for key in sorted(fb.fil[0].keys())
]
dictstr = pprint.pformat(fb_sorted)
# dictstr = pprint.pformat(fb.fil[0])
self.txtFiltDict.setText(dictstr)
#------------------------------------------------------------------------------
def _show_filt_tree(self):
"""
Print filter tree for debugging
"""
self.txtFiltTree.setVisible(self.chkFiltTree.isChecked())
ftree_sorted = [
'<b>' + str(key) + ' : ' + '</b>' + str(fb.fil_tree[key])
for key in sorted(fb.fil_tree.keys())
]
dictstr = pprint.pformat(ftree_sorted, indent=4)
# dictstr = pprint.pformat(fb.fil[0])
self.txtFiltTree.setText(dictstr)
class Plot_Phi(QWidget):
# incoming, connected in sender widget (locally connected to self.process_sig_rx() )
sig_rx = pyqtSignal(object)
# outgoing, distributed via plot_tab_widget
sig_tx = pyqtSignal(object)
def __init__(self, parent):
super(Plot_Phi, self).__init__(parent)
self.needs_calc = True # recalculation of filter function necessary
self.needs_draw = True # plotting neccessary (e.g. log instead of lin)
self.tool_tip = "Phase frequency response"
self.tab_label = "\u03C6(f)" # phi(f)
self._construct_UI()
#------------------------------------------------------------------------------
def process_sig_rx(self, dict_sig=None):
"""
Process signals coming from the navigation toolbar and from sig_rx
"""
logger.debug("Processing {0} | needs_calc = {1}, visible = {2}"\
.format(dict_sig, self.needs_calc, self.isVisible()))
if dict_sig['sender'] == __name__:
logger.debug("Stopped infinite loop\n{0}".format(
pprint_log(dict_sig)))
return
if self.isVisible():
if 'data_changed' in dict_sig or 'home' in dict_sig or self.needs_calc:
self.draw()
self.needs_calc = False
self.needs_draw = False
elif 'view_changed' in dict_sig or self.needs_draw:
self.update_view()
self.needs_draw = False
# elif ('ui_changed' in dict_sig and dict_sig['ui_changed'] == 'resized')\
# or self.needs_redraw:
# self.redraw()
else:
if 'data_changed' in dict_sig:
self.needs_calc = True
elif 'view_changed' in dict_sig:
self.needs_draw = True
# elif 'ui_changed' in dict_sig and dict_sig['ui_changed'] == 'resized':
# self.needs_redraw = True
#------------------------------------------------------------------------------
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Matplotlib widget with NavigationToolbar
- Frame with control elements
"""
self.cmbUnitsPhi = QComboBox(self)
units = ["rad", "rad/pi", "deg"]
scales = [1., 1. / np.pi, 180. / np.pi]
for unit, scale in zip(units, scales):
self.cmbUnitsPhi.addItem(unit, scale)
self.cmbUnitsPhi.setObjectName("cmbUnitsA")
self.cmbUnitsPhi.setToolTip("Set unit for phase.")
self.cmbUnitsPhi.setCurrentIndex(0)
self.cmbUnitsPhi.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.chkWrap = QCheckBox("Wrapped Phase", self)
self.chkWrap.setChecked(False)
self.chkWrap.setToolTip("Plot phase wrapped to +/- pi")
layHControls = QHBoxLayout()
layHControls.addWidget(self.cmbUnitsPhi)
layHControls.addWidget(self.chkWrap)
layHControls.addStretch(10)
#----------------------------------------------------------------------
# ### frmControls ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
#----------------------------------------------------------------------
# ### mplwidget ###
#
# main widget, encompassing the other widgets
#----------------------------------------------------------------------
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # initial drawing
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.chkWrap.clicked.connect(self.draw)
self.cmbUnitsPhi.currentIndexChanged.connect(self.unit_changed)
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
#------------------------------------------------------------------------------
def init_axes(self):
"""
Initialize and clear the axes - this is only called once
"""
if len(self.mplwidget.fig.get_axes()) == 0: # empty figure, no axes
self.ax = self.mplwidget.fig.subplots()
self.ax.get_xaxis().tick_bottom() # remove axis ticks on top
self.ax.get_yaxis().tick_left() # remove axis ticks right
#------------------------------------------------------------------------------
def unit_changed(self):
"""
Unit for phase display has been changed, emit a 'view_changed' signal
and continue with drawing.
"""
self.sig_tx.emit({'sender': __name__, 'view_changed': 'plot_phi'})
self.draw()
#------------------------------------------------------------------------------
def calc_resp(self):
"""
(Re-)Calculate the complex frequency response H(f)
"""
# calculate H_cplx(W) (complex) for W = 0 ... 2 pi:
self.W, self.H_cmplx = calc_Hcomplex(fb.fil[0],
params['N_FFT'],
wholeF=True)
# replace nan and inf by finite values, otherwise np.unwrap yields
# an array full of nans
self.H_cmplx = np.nan_to_num(self.H_cmplx)
#------------------------------------------------------------------------------
def draw(self):
"""
Main entry point:
Re-calculate \|H(f)\| and draw the figure
"""
self.calc_resp()
self.update_view()
#------------------------------------------------------------------------------
def update_view(self):
"""
Draw the figure with new limits, scale etc without recalculating H(f)
"""
self.unitPhi = qget_cmb_box(self.cmbUnitsPhi, data=False)
f_S2 = fb.fil[0]['f_S'] / 2.
#========= select frequency range to be displayed =====================
#=== shift, scale and select: W -> F, H_cplx -> H_c
F = self.W * f_S2 / np.pi
if fb.fil[0]['freqSpecsRangeType'] == 'sym':
# shift H and F by f_S/2
H = np.fft.fftshift(self.H_cmplx)
F -= f_S2
elif fb.fil[0]['freqSpecsRangeType'] == 'half':
# only use the first half of H and F
H = self.H_cmplx[0:params['N_FFT'] // 2]
F = F[0:params['N_FFT'] // 2]
else: # fb.fil[0]['freqSpecsRangeType'] == 'whole'
# use H and F as calculated
H = self.H_cmplx
y_str = r'$\angle H(\mathrm{e}^{\mathrm{j} \Omega})$ in '
if self.unitPhi == 'rad':
y_str += 'rad ' + r'$\rightarrow $'
scale = 1.
elif self.unitPhi == 'rad/pi':
y_str += 'rad' + r'$ / \pi \;\rightarrow $'
scale = 1. / np.pi
else:
y_str += 'deg ' + r'$\rightarrow $'
scale = 180. / np.pi
fb.fil[0]['plt_phiLabel'] = y_str
fb.fil[0]['plt_phiUnit'] = self.unitPhi
if self.chkWrap.isChecked():
phi_plt = np.angle(H) * scale
else:
phi_plt = np.unwrap(np.angle(H)) * scale
#---------------------------------------------------------
self.ax.clear() # need to clear, doesn't overwrite
line_phi, = self.ax.plot(F, phi_plt)
#---------------------------------------------------------
self.ax.set_title(r'Phase Frequency Response')
self.ax.set_xlabel(fb.fil[0]['plt_fLabel'])
self.ax.set_ylabel(y_str)
self.ax.set_xlim(fb.fil[0]['freqSpecsRange'])
self.redraw()
#------------------------------------------------------------------------------
def redraw(self):
"""
Redraw the canvas when e.g. the canvas size has changed
"""
self.mplwidget.redraw()
def _construct_UI(self):
# ----------- ---------------------------------------------------
# Run control widgets
# ---------------------------------------------------------------
# self.but_auto_run = QPushButtonRT(text=to_html("Auto", frmt="b"), margin=0)
self.but_auto_run = QPushButton(" Auto", self)
self.but_auto_run.setObjectName("but_auto_run")
self.but_auto_run.setToolTip(
"<span>Update response automatically when "
"parameters have been changed.</span>")
# self.but_auto_run.setMaximumWidth(qtext_width(text=" Auto "))
self.but_auto_run.setCheckable(True)
self.but_auto_run.setChecked(True)
but_height = self.but_auto_run.sizeHint().height()
self.but_run = QPushButton(self)
self.but_run.setIcon(QIcon(":/play.svg"))
self.but_run.setIconSize(QSize(but_height, but_height))
self.but_run.setFixedSize(QSize(2 * but_height, but_height))
self.but_run.setToolTip("Run simulation")
self.but_run.setEnabled(True)
self.cmb_sim_select = QComboBox(self)
self.cmb_sim_select.addItems(["Float", "Fixpoint"])
qset_cmb_box(self.cmb_sim_select, "Float")
self.cmb_sim_select.setToolTip("<span>Simulate floating-point or "
"fixpoint response.</span>")
self.lbl_N_points = QLabel(to_html("N", frmt='bi') + " =", self)
self.led_N_points = QLineEdit(self)
self.led_N_points.setText(str(self.N))
self.led_N_points.setToolTip(
"<span>Last data point. "
"<i>N</i> = 0 tries to choose for you.</span>")
self.led_N_points.setMaximumWidth(qtext_width(N_x=8))
self.lbl_N_start = QLabel(to_html("N_0", frmt='bi') + " =", self)
self.led_N_start = QLineEdit(self)
self.led_N_start.setText(str(self.N_start))
self.led_N_start.setToolTip("<span>First point to plot.</span>")
self.led_N_start.setMaximumWidth(qtext_width(N_x=8))
self.lbl_N_frame = QLabel(to_html("ΔN", frmt='bi') + " =", self)
self.led_N_frame = QLineEdit(self)
self.led_N_frame.setText(str(self.N_frame))
self.led_N_frame.setToolTip(
"<span>Frame length; longer frames calculate faster but calculation cannot "
"be stopped so quickly. "
"<i>ΔN</i> = 0 calculates all samples in one frame.</span>")
self.led_N_frame.setMaximumWidth(qtext_width(N_x=8))
self.prg_wdg = QProgressBar(self)
self.prg_wdg.setFixedHeight(but_height)
self.prg_wdg.setFixedWidth(qtext_width(N_x=6))
self.prg_wdg.setMinimum(0)
self.prg_wdg.setValue(0)
self.but_toggle_stim_options = PushButton(" Stimuli ", checked=True)
self.but_toggle_stim_options.setObjectName("but_stim_options")
self.but_toggle_stim_options.setToolTip(
"<span>Show / hide stimulus options.</span>")
self.lbl_stim_cmplx_warn = QLabel(self)
self.lbl_stim_cmplx_warn = QLabel(to_html("Cmplx!", frmt='b'), self)
self.lbl_stim_cmplx_warn.setToolTip(
'<span>Signal is complex valued; '
'single-sided and H<sub>id</sub> spectra may be wrong.</span>')
self.lbl_stim_cmplx_warn.setStyleSheet("background-color : yellow;"
"border : 1px solid grey")
self.but_fft_wdg = QPushButton(self)
self.but_fft_wdg.setIcon(QIcon(":/fft.svg"))
self.but_fft_wdg.setIconSize(QSize(but_height, but_height))
self.but_fft_wdg.setFixedSize(QSize(int(1.5 * but_height), but_height))
self.but_fft_wdg.setToolTip(
'<span>Show / hide FFT widget (select window type '
' and display its properties).</span>')
self.but_fft_wdg.setCheckable(True)
self.but_fft_wdg.setChecked(False)
self.qfft_win_select = QFFTWinSelector(self, self.win_dict)
self.but_fx_scale = PushButton(" FX:Int ")
self.but_fx_scale.setObjectName("but_fx_scale")
self.but_fx_scale.setToolTip(
"<span>Display data with integer (fixpoint) scale.</span>")
self.but_fx_range = PushButton(" FX:Range")
self.but_fx_range.setObjectName("but_fx_limits")
self.but_fx_range.setToolTip(
"<span>Display limits of fixpoint range.</span>")
layH_ctrl_run = QHBoxLayout()
layH_ctrl_run.addWidget(self.but_auto_run)
layH_ctrl_run.addWidget(self.but_run)
layH_ctrl_run.addWidget(self.cmb_sim_select)
layH_ctrl_run.addSpacing(10)
layH_ctrl_run.addWidget(self.lbl_N_start)
layH_ctrl_run.addWidget(self.led_N_start)
layH_ctrl_run.addWidget(self.lbl_N_points)
layH_ctrl_run.addWidget(self.led_N_points)
layH_ctrl_run.addWidget(self.lbl_N_frame)
layH_ctrl_run.addWidget(self.led_N_frame)
layH_ctrl_run.addWidget(self.prg_wdg)
layH_ctrl_run.addSpacing(20)
layH_ctrl_run.addWidget(self.but_toggle_stim_options)
layH_ctrl_run.addSpacing(5)
layH_ctrl_run.addWidget(self.lbl_stim_cmplx_warn)
layH_ctrl_run.addSpacing(20)
layH_ctrl_run.addWidget(self.but_fft_wdg)
layH_ctrl_run.addWidget(self.qfft_win_select)
layH_ctrl_run.addSpacing(20)
layH_ctrl_run.addWidget(self.but_fx_scale)
layH_ctrl_run.addWidget(self.but_fx_range)
layH_ctrl_run.addStretch(10)
# layH_ctrl_run.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_run = QWidget(self)
self.wdg_ctrl_run.setLayout(layH_ctrl_run)
# --- end of run control ----------------------------------------
# ----------- ---------------------------------------------------
# Controls for time domain
# ---------------------------------------------------------------
self.lbl_plt_time_stim = QLabel(to_html("Stim. x", frmt='bi'), self)
self.cmb_plt_time_stim = QComboBox(self)
qcmb_box_populate(self.cmb_plt_time_stim, self.plot_styles_list,
self.plt_time_stim)
self.cmb_plt_time_stim.setToolTip(
"<span>Plot style for stimulus.</span>")
self.lbl_plt_time_stmq = QLabel(
to_html(" Fixp. Stim. x_Q", frmt='bi'), self)
self.cmb_plt_time_stmq = QComboBox(self)
qcmb_box_populate(self.cmb_plt_time_stmq, self.plot_styles_list,
self.plt_time_stmq)
self.cmb_plt_time_stmq.setToolTip(
"<span>Plot style for <em>fixpoint</em> "
"(quantized) stimulus.</span>")
lbl_plt_time_resp = QLabel(to_html(" Resp. y", frmt='bi'),
self)
self.cmb_plt_time_resp = QComboBox(self)
qcmb_box_populate(self.cmb_plt_time_resp, self.plot_styles_list,
self.plt_time_resp)
self.cmb_plt_time_resp.setToolTip(
"<span>Plot style for response.</span>")
self.lbl_win_time = QLabel(to_html(" Win", frmt='bi'), self)
self.chk_win_time = QCheckBox(self)
self.chk_win_time.setObjectName("chk_win_time")
self.chk_win_time.setToolTip(
'<span>Plot FFT windowing function.</span>')
self.chk_win_time.setChecked(False)
line1 = QVLine()
line2 = QVLine(width=5)
self.but_log_time = PushButton(" dB")
self.but_log_time.setObjectName("but_log_time")
self.but_log_time.setToolTip(
"<span>Logarithmic scale for y-axis.</span>")
lbl_plt_time_spgr = QLabel(to_html("Spectrogram", frmt='bi'), self)
self.cmb_plt_time_spgr = QComboBox(self)
qcmb_box_populate(self.cmb_plt_time_spgr, self.cmb_time_spgr_items,
self.plt_time_spgr)
spgr_en = self.plt_time_spgr != "none"
self.cmb_mode_spgr_time = QComboBox(self)
qcmb_box_populate(self.cmb_mode_spgr_time,
self.cmb_mode_spgr_time_items, self.mode_spgr_time)
self.cmb_mode_spgr_time.setVisible(spgr_en)
self.lbl_byfs_spgr_time = QLabel(to_html(" per f_S", frmt='b'),
self)
self.lbl_byfs_spgr_time.setVisible(spgr_en)
self.chk_byfs_spgr_time = QCheckBox(self)
self.chk_byfs_spgr_time.setObjectName("chk_log_spgr")
self.chk_byfs_spgr_time.setToolTip("<span>Display spectral density "
"i.e. scale by f_S</span>")
self.chk_byfs_spgr_time.setChecked(True)
self.chk_byfs_spgr_time.setVisible(spgr_en)
self.but_log_spgr_time = QPushButton("dB")
self.but_log_spgr_time.setMaximumWidth(qtext_width(text=" dB"))
self.but_log_spgr_time.setObjectName("but_log_spgr")
self.but_log_spgr_time.setToolTip(
"<span>Logarithmic scale for spectrogram.</span>")
self.but_log_spgr_time.setCheckable(True)
self.but_log_spgr_time.setChecked(True)
self.but_log_spgr_time.setVisible(spgr_en)
self.lbl_time_nfft_spgr = QLabel(to_html(" N_FFT =", frmt='bi'),
self)
self.lbl_time_nfft_spgr.setVisible(spgr_en)
self.led_time_nfft_spgr = QLineEdit(self)
self.led_time_nfft_spgr.setText(str(self.time_nfft_spgr))
self.led_time_nfft_spgr.setToolTip("<span>Number of FFT points per "
"spectrogram segment.</span>")
self.led_time_nfft_spgr.setVisible(spgr_en)
self.lbl_time_ovlp_spgr = QLabel(to_html(" N_OVLP =", frmt='bi'),
self)
self.lbl_time_ovlp_spgr.setVisible(spgr_en)
self.led_time_ovlp_spgr = QLineEdit(self)
self.led_time_ovlp_spgr.setText(str(self.time_ovlp_spgr))
self.led_time_ovlp_spgr.setToolTip(
"<span>Number of overlap data points "
"between spectrogram segments.</span>")
self.led_time_ovlp_spgr.setVisible(spgr_en)
self.lbl_log_bottom_time = QLabel(to_html("min =", frmt='bi'), self)
self.led_log_bottom_time = QLineEdit(self)
self.led_log_bottom_time.setText(str(self.bottom_t))
self.led_log_bottom_time.setMaximumWidth(qtext_width(N_x=8))
self.led_log_bottom_time.setToolTip(
"<span>Minimum display value for time and spectrogram plots with log. scale."
"</span>")
self.lbl_log_bottom_time.setVisible(
self.but_log_time.isChecked()
or (spgr_en and self.but_log_spgr_time.isChecked()))
self.led_log_bottom_time.setVisible(
self.lbl_log_bottom_time.isVisible())
# self.lbl_colorbar_time = QLabel(to_html(" Col.bar", frmt='b'), self)
# self.lbl_colorbar_time.setVisible(spgr_en)
# self.chk_colorbar_time = QCheckBox(self)
# self.chk_colorbar_time.setObjectName("chk_colorbar_time")
# self.chk_colorbar_time.setToolTip("<span>Enable colorbar</span>")
# self.chk_colorbar_time.setChecked(True)
# self.chk_colorbar_time.setVisible(spgr_en)
layH_ctrl_time = QHBoxLayout()
layH_ctrl_time.addWidget(self.lbl_plt_time_stim)
layH_ctrl_time.addWidget(self.cmb_plt_time_stim)
#
layH_ctrl_time.addWidget(self.lbl_plt_time_stmq)
layH_ctrl_time.addWidget(self.cmb_plt_time_stmq)
#
layH_ctrl_time.addWidget(lbl_plt_time_resp)
layH_ctrl_time.addWidget(self.cmb_plt_time_resp)
#
layH_ctrl_time.addWidget(self.lbl_win_time)
layH_ctrl_time.addWidget(self.chk_win_time)
layH_ctrl_time.addSpacing(5)
layH_ctrl_time.addWidget(line1)
layH_ctrl_time.addSpacing(5)
#
layH_ctrl_time.addWidget(self.lbl_log_bottom_time)
layH_ctrl_time.addWidget(self.led_log_bottom_time)
layH_ctrl_time.addWidget(self.but_log_time)
layH_ctrl_time.addSpacing(5)
layH_ctrl_time.addWidget(line2)
layH_ctrl_time.addSpacing(5)
#
layH_ctrl_time.addWidget(lbl_plt_time_spgr)
layH_ctrl_time.addWidget(self.cmb_plt_time_spgr)
layH_ctrl_time.addWidget(self.cmb_mode_spgr_time)
layH_ctrl_time.addWidget(self.lbl_byfs_spgr_time)
layH_ctrl_time.addWidget(self.chk_byfs_spgr_time)
layH_ctrl_time.addWidget(self.but_log_spgr_time)
layH_ctrl_time.addWidget(self.lbl_time_nfft_spgr)
layH_ctrl_time.addWidget(self.led_time_nfft_spgr)
layH_ctrl_time.addWidget(self.lbl_time_ovlp_spgr)
layH_ctrl_time.addWidget(self.led_time_ovlp_spgr)
layH_ctrl_time.addStretch(10)
# layH_ctrl_time.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_time = QWidget(self)
self.wdg_ctrl_time.setLayout(layH_ctrl_time)
# ---- end time domain ------------------
# ---------------------------------------------------------------
# Controls for frequency domain
# ---------------------------------------------------------------
self.lbl_plt_freq_stim = QLabel(to_html("Stimulus X", frmt='bi'), self)
self.cmb_plt_freq_stim = QComboBox(self)
qcmb_box_populate(self.cmb_plt_freq_stim, self.plot_styles_list,
self.plt_freq_stim)
self.cmb_plt_freq_stim.setToolTip(
"<span>Plot style for stimulus.</span>")
self.lbl_plt_freq_stmq = QLabel(
to_html(" Fixp. Stim. X_Q", frmt='bi'), self)
self.cmb_plt_freq_stmq = QComboBox(self)
qcmb_box_populate(self.cmb_plt_freq_stmq, self.plot_styles_list,
self.plt_freq_stmq)
self.cmb_plt_freq_stmq.setToolTip(
"<span>Plot style for <em>fixpoint</em> (quantized) stimulus.</span>"
)
lbl_plt_freq_resp = QLabel(to_html(" Response Y", frmt='bi'),
self)
self.cmb_plt_freq_resp = QComboBox(self)
qcmb_box_populate(self.cmb_plt_freq_resp, self.plot_styles_list,
self.plt_freq_resp)
self.cmb_plt_freq_resp.setToolTip(
"<span>Plot style for response.</span>")
self.but_log_freq = QPushButton("dB")
self.but_log_freq.setMaximumWidth(qtext_width(" dB"))
self.but_log_freq.setObjectName(".but_log_freq")
self.but_log_freq.setToolTip(
"<span>Logarithmic scale for y-axis.</span>")
self.but_log_freq.setCheckable(True)
self.but_log_freq.setChecked(True)
self.lbl_log_bottom_freq = QLabel(to_html("min =", frmt='bi'), self)
self.lbl_log_bottom_freq.setVisible(self.but_log_freq.isChecked())
self.led_log_bottom_freq = QLineEdit(self)
self.led_log_bottom_freq.setText(str(self.bottom_f))
self.led_log_bottom_freq.setMaximumWidth(qtext_width(N_x=8))
self.led_log_bottom_freq.setToolTip(
"<span>Minimum display value for log. scale.</span>")
self.led_log_bottom_freq.setVisible(self.but_log_freq.isChecked())
if not self.but_log_freq.isChecked():
self.bottom_f = 0
self.cmb_freq_display = QComboBox(self)
qcmb_box_populate(self.cmb_freq_display, self.cmb_freq_display_items,
self.cmb_freq_display_item)
self.cmb_freq_display.setObjectName("cmb_re_im_freq")
self.but_Hf = QPushButtonRT(self, to_html("H_id", frmt="bi"), margin=5)
self.but_Hf.setObjectName("chk_Hf")
self.but_Hf.setToolTip(
"<span>Show ideal frequency response, calculated "
"from the filter coefficients.</span>")
self.but_Hf.setChecked(False)
self.but_Hf.setCheckable(True)
self.but_freq_norm_impz = QPushButtonRT(
text="<b><i>E<sub>X</sub></i> = 1</b>", margin=5)
self.but_freq_norm_impz.setToolTip(
"<span>Normalize the FFT of the stimulus with <i>N<sub>FFT</sub></i> for "
"<i>E<sub>X</sub></i> = 1. For a dirac pulse, this yields "
"|<i>Y(f)</i>| = |<i>H(f)</i>|. DC and Noise need to be "
"turned off, window should be <b>Rectangular</b>.</span>")
self.but_freq_norm_impz.setCheckable(True)
self.but_freq_norm_impz.setChecked(True)
self.but_freq_norm_impz.setObjectName("freq_norm_impz")
self.but_freq_show_info = QPushButton("Info", self)
self.but_freq_show_info.setMaximumWidth(qtext_width(" Info "))
self.but_freq_show_info.setObjectName("but_show_info_freq")
self.but_freq_show_info.setToolTip(
"<span>Show signal power in legend.</span>")
self.but_freq_show_info.setCheckable(True)
self.but_freq_show_info.setChecked(False)
layH_ctrl_freq = QHBoxLayout()
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stim)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stim)
#
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stmq)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stmq)
#
layH_ctrl_freq.addWidget(lbl_plt_freq_resp)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_resp)
#
layH_ctrl_freq.addSpacing(5)
layH_ctrl_freq.addWidget(self.but_Hf)
layH_ctrl_freq.addStretch(1)
#
layH_ctrl_freq.addWidget(self.lbl_log_bottom_freq)
layH_ctrl_freq.addWidget(self.led_log_bottom_freq)
layH_ctrl_freq.addWidget(self.but_log_freq)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.cmb_freq_display)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.but_freq_norm_impz)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.but_freq_show_info)
layH_ctrl_freq.addStretch(10)
# layH_ctrl_freq.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_freq = QWidget(self)
self.wdg_ctrl_freq.setLayout(layH_ctrl_freq)
# ---- end Frequency Domain ------------------
# ----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
# ----------------------------------------------------------------------
# connect FFT widget to qfft_selector and vice versa and to and signals upstream:
self.fft_widget.sig_tx.connect(self.process_sig_rx)
self.qfft_win_select.sig_tx.connect(self.process_sig_rx)
# connect process_sig_rx output to both FFT widgets
self.sig_tx_fft.connect(self.fft_widget.sig_rx)
self.sig_tx_fft.connect(self.qfft_win_select.sig_rx)
# ----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
# ----------------------------------------------------------------------
# --- run control ---
self.led_N_start.editingFinished.connect(self.update_N)
self.led_N_points.editingFinished.connect(self.update_N)
self.led_N_frame.editingFinished.connect(self.update_N)
self.but_fft_wdg.clicked.connect(self.toggle_fft_wdg)
def _construct_UI(self):
"""
Construct UI with comboboxes for selecting filter:
- cmbResponseType for selecting response type rt (LP, HP, ...)
- cmbFilterType for selection of filter type (IIR, FIR, ...)
- cmbFilterClass for selection of design design class (Chebyshev, ...)
and populate them from the "filterTree" dict during the initial run.
Later, calling _set_response_type() updates the three combo boxes.
See filterbroker.py for structure and content of "filterTree" dict
"""
# ----------------------------------------------------------------------
# Combo boxes for filter selection
# ----------------------------------------------------------------------
self.cmbResponseType = QComboBox(self)
self.cmbResponseType.setObjectName("comboResponseType")
self.cmbResponseType.setToolTip("Select filter response type.")
self.cmbFilterType = QComboBox(self)
self.cmbFilterType.setObjectName("comboFilterType")
self.cmbFilterType.setToolTip(
"<span>Choose filter type, either recursive (Infinite Impulse Response) "
"or transversal (Finite Impulse Response).</span>")
self.cmbFilterClass = QComboBox(self)
self.cmbFilterClass.setObjectName("comboFilterClass")
self.cmbFilterClass.setToolTip("Select the filter design class.")
# Adapt comboboxes size dynamically to largest element
self.cmbResponseType.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.cmbFilterType.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.cmbFilterClass.setSizeAdjustPolicy(QComboBox.AdjustToContents)
# ----------------------------------------------------------------------
# Populate combo box with initial settings from fb.fil_tree
# ----------------------------------------------------------------------
# Translate short response type ("LP") to displayed names ("Lowpass")
# (correspondence is defined in pyfda_rc.py) and populate rt combo box
#
rt_list = sorted(list(fb.fil_tree.keys()))
for rt in rt_list:
try:
self.cmbResponseType.addItem(rc.rt_names[rt], rt)
except KeyError as e:
logger.warning(
f"KeyError: {e} has no corresponding full name in rc.rt_names."
)
idx = self.cmbResponseType.findData('LP') # find index for 'LP'
if idx == -1: # Key 'LP' does not exist, use first entry instead
idx = 0
self.cmbResponseType.setCurrentIndex(idx) # set initial index
rt = qget_cmb_box(self.cmbResponseType)
for ft in fb.fil_tree[rt]:
self.cmbFilterType.addItem(rc.ft_names[ft], ft)
self.cmbFilterType.setCurrentIndex(0) # set initial index
ft = qget_cmb_box(self.cmbFilterType)
for fc in fb.fil_tree[rt][ft]:
self.cmbFilterClass.addItem(fb.filter_classes[fc]['name'], fc)
self.cmbFilterClass.setCurrentIndex(0) # set initial index
# ----------------------------------------------------------------------
# Layout for Filter Type Subwidgets
# ----------------------------------------------------------------------
layHFilWdg = QHBoxLayout() # container for filter subwidgets
layHFilWdg.addWidget(self.cmbResponseType) # LP, HP, BP, etc.
layHFilWdg.addStretch()
layHFilWdg.addWidget(self.cmbFilterType) # FIR, IIR
layHFilWdg.addStretch()
layHFilWdg.addWidget(self.cmbFilterClass) # bessel, elliptic, etc.
# ----------------------------------------------------------------------
# Layout for dynamic filter subwidgets (empty frame)
# ----------------------------------------------------------------------
# see Summerfield p. 278
self.layHDynWdg = QHBoxLayout() # for additional dynamic subwidgets
# ----------------------------------------------------------------------
# Filter Order Subwidgets
# ----------------------------------------------------------------------
self.lblOrder = QLabel("<b>Order:</b>")
self.chkMinOrder = QCheckBox("Minimum", self)
self.chkMinOrder.setToolTip(
"<span>Minimum filter order / # of taps is determined automatically.</span>"
)
self.lblOrderN = QLabel("<b><i>N =</i></b>")
self.ledOrderN = QLineEdit(str(fb.fil[0]['N']), self)
self.ledOrderN.setToolTip("Filter order (# of taps - 1).")
# --------------------------------------------------
# Layout for filter order subwidgets
# --------------------------------------------------
layHOrdWdg = QHBoxLayout()
layHOrdWdg.addWidget(self.lblOrder)
layHOrdWdg.addWidget(self.chkMinOrder)
layHOrdWdg.addStretch()
layHOrdWdg.addWidget(self.lblOrderN)
layHOrdWdg.addWidget(self.ledOrderN)
# ----------------------------------------------------------------------
# OVERALL LAYOUT (stack standard + dynamic subwidgets vertically)
# ----------------------------------------------------------------------
self.layVAllWdg = QVBoxLayout()
self.layVAllWdg.addLayout(layHFilWdg)
self.layVAllWdg.addLayout(self.layHDynWdg)
self.layVAllWdg.addLayout(layHOrdWdg)
# ==============================================================================
frmMain = QFrame(self)
frmMain.setLayout(self.layVAllWdg)
layHMain = QHBoxLayout()
layHMain.addWidget(frmMain)
layHMain.setContentsMargins(*rc.params['wdg_margins'])
self.setLayout(layHMain)
# ==============================================================================
# ------------------------------------------------------------
# SIGNALS & SLOTS
# ------------------------------------------------------------
# Connect comboBoxes and setters, propgate change events hierarchically
# through all widget methods and emit 'filt_changed' in the end.
self.cmbResponseType.currentIndexChanged.connect(
lambda: self._set_response_type(enb_signal=True)) # 'LP'
self.cmbFilterType.currentIndexChanged.connect(
lambda: self._set_filter_type(enb_signal=True)) # 'IIR'
self.cmbFilterClass.currentIndexChanged.connect(
lambda: self._set_design_method(enb_signal=True)) # 'cheby1'
self.chkMinOrder.clicked.connect(
lambda: self._set_filter_order(enb_signal=True)) # Min. Order
self.ledOrderN.editingFinished.connect(
lambda: self._set_filter_order(enb_signal=True)) # Manual Order
def _construct_UI(self):
"""
Intitialize the widget, consisting of:
- Checkboxes for selecting the info to be displayed
- A large text window for displaying infos about the filter design
algorithm
"""
bfont = QFont()
bfont.setBold(True)
# ============== UI Layout =====================================
# widget / subwindow for filter infos
self.chkFiltPerf = QCheckBox("H(f)", self)
self.chkFiltPerf.setChecked(True)
self.chkFiltPerf.setToolTip(
"Display frequency response at test frequencies.")
self.chkDocstring = QCheckBox("Doc$", self)
self.chkDocstring.setChecked(False)
self.chkDocstring.setToolTip(
"Display docstring from python filter method.")
self.chkRichText = QCheckBox("RTF", self)
self.chkRichText.setChecked(HAS_DOCUTILS)
self.chkRichText.setEnabled(HAS_DOCUTILS)
self.chkRichText.setToolTip(
"Render documentation in Rich Text Format.")
self.chkFiltDict = QCheckBox("FiltDict", self)
self.chkFiltDict.setToolTip("Show filter dictionary for debugging.")
self.chkFiltTree = QCheckBox("FiltTree", self)
self.chkFiltTree.setToolTip("Show filter tree for debugging.")
self.layHChkBoxes = QHBoxLayout()
self.layHChkBoxes.addWidget(self.chkFiltPerf)
self.layHChkBoxes.addStretch(1)
self.layHChkBoxes.addWidget(self.chkDocstring)
self.layHChkBoxes.addStretch(1)
self.layHChkBoxes.addWidget(self.chkRichText)
self.layHChkBoxes.addStretch(1)
self.layHChkBoxes.addWidget(self.chkFiltDict)
self.layHChkBoxes.addStretch(1)
self.layHChkBoxes.addWidget(self.chkFiltTree)
self.frmMain = QFrame(self)
self.frmMain.setLayout(self.layHChkBoxes)
self.tblFiltPerf = QTableWidget(self)
self.tblFiltPerf.setAlternatingRowColors(True)
# self.tblFiltPerf.verticalHeader().setVisible(False)
self.tblFiltPerf.horizontalHeader().setHighlightSections(False)
self.tblFiltPerf.horizontalHeader().setFont(bfont)
self.tblFiltPerf.verticalHeader().setHighlightSections(False)
self.tblFiltPerf.verticalHeader().setFont(bfont)
self.txtFiltInfoBox = QTextBrowser(self)
self.txtFiltDict = QTextBrowser(self)
self.txtFiltTree = QTextBrowser(self)
layVMain = QVBoxLayout()
layVMain.addWidget(self.frmMain)
# layVMain.addLayout(self.layHChkBoxes)
splitter = QSplitter(self)
splitter.setOrientation(Qt.Vertical)
splitter.addWidget(self.tblFiltPerf)
splitter.addWidget(self.txtFiltInfoBox)
splitter.addWidget(self.txtFiltDict)
splitter.addWidget(self.txtFiltTree)
# setSizes uses absolute pixel values, but can be "misused" by specifying values
# that are way too large: in this case, the space is distributed according
# to the _ratio_ of the values:
splitter.setSizes([3000, 10000, 1000, 1000])
layVMain.addWidget(splitter)
layVMain.setContentsMargins(*params['wdg_margins'])
self.setLayout(layVMain)
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.chkFiltPerf.clicked.connect(self._show_filt_perf)
self.chkFiltDict.clicked.connect(self._show_filt_dict)
self.chkFiltTree.clicked.connect(self._show_filt_tree)
self.chkDocstring.clicked.connect(self._show_doc)
self.chkRichText.clicked.connect(self._show_doc)
class PlotImpz_UI(QWidget):
"""
Create the UI for the PlotImpz class
"""
# incoming: not implemented at the moment, update_N is triggered directly
# by plot_impz
# sig_rx = pyqtSignal(object)
# outgoing: from various UI elements to PlotImpz ('ui_changed':'xxx')
sig_tx = pyqtSignal(object)
# outgoing to local fft window
sig_tx_fft = pyqtSignal(object)
def __init__(self, parent):
"""
Pass instance `parent` of parent class (FilterCoeffs)
"""
super(PlotImpz_UI, self).__init__(parent)
"""
Intitialize the widget, consisting of:
- top chkbox row
- coefficient table
- two bottom rows with action buttons
"""
# initial settings
self.N_start = 0
self.N_user = 0
self.N = 0
# time
self.plt_time_resp = "Stem"
self.plt_time_stim = "None"
self.plt_time_stmq = "None"
self.plt_time_spgr = "None"
self.bottom_t = -80 # initial value for log. scale (time)
self.nfft_spgr_time = 256 # number of fft points per spectrogram segment
self.ovlp_spgr_time = 128 # number of overlap points between spectrogram segments
self.mode_spgr_time = "magnitude"
# stimuli
self.stim = "Impulse"
self.chirp_method = 'Linear'
self.noise = "None"
self.f1 = 0.02
self.f2 = 0.03
self.A1 = 1.0
self.A2 = 0.0
self.phi1 = self.phi2 = 0
self.noi = 0.1
self.noise = 'none'
self.DC = 0.0
self.stim_formula = "A1 * abs(sin(2 * pi * f1 * n))"
# frequency
self.plt_freq_resp = "Line"
self.plt_freq_stim = "None"
self.plt_freq_stmq = "None"
self.bottom_f = -120 # initial value for log. scale
self.param = None
# dictionary for fft window settings
self.win_dict = fb.fil[0]['win_fft']
self.fft_window = None # handle for FFT window pop-up widget
self.window_name = "Rectangular"
self._construct_UI()
self._enable_stim_widgets()
self.update_N(emit=False) # also updates window function
self._update_noi()
def _construct_UI(self):
# ----------- ---------------------------------------------------
# Run control widgets
# ---------------------------------------------------------------
self.chk_auto_run = QCheckBox("Auto", self)
self.chk_auto_run.setObjectName("chk_auto_run")
self.chk_auto_run.setToolTip("<span>Update response automatically when "
"parameters have been changed.</span>")
self.chk_auto_run.setChecked(True)
self.but_run = QPushButton(self)
self.but_run.setText("RUN")
self.but_run.setToolTip("Run simulation")
self.but_run.setEnabled(not self.chk_auto_run.isChecked())
self.cmb_sim_select = QComboBox(self)
self.cmb_sim_select.addItems(["Float","Fixpoint"])
qset_cmb_box(self.cmb_sim_select, "Float")
self.cmb_sim_select.setToolTip("<span>Simulate floating-point or fixpoint response."
"</span>")
self.lbl_N_points = QLabel(to_html("N", frmt='bi') + " =", self)
self.led_N_points = QLineEdit(self)
self.led_N_points.setText(str(self.N))
self.led_N_points.setToolTip("<span>Number of displayed data points. "
"<i>N</i> = 0 tries to choose for you.</span>")
self.lbl_N_start = QLabel(to_html("N_0", frmt='bi') + " =", self)
self.led_N_start = QLineEdit(self)
self.led_N_start.setText(str(self.N_start))
self.led_N_start.setToolTip("<span>First point to plot.</span>")
self.chk_fx_scale = QCheckBox("Int. scale", self)
self.chk_fx_scale.setObjectName("chk_fx_scale")
self.chk_fx_scale.setToolTip("<span>Display data with integer (fixpoint) scale.</span>")
self.chk_fx_scale.setChecked(False)
self.chk_stim_options = QCheckBox("Stim. Options", self)
self.chk_stim_options.setObjectName("chk_stim_options")
self.chk_stim_options.setToolTip("<span>Show stimulus options.</span>")
self.chk_stim_options.setChecked(True)
self.but_fft_win = QPushButton(self)
self.but_fft_win.setText("WIN FFT")
self.but_fft_win.setToolTip('<span> time and frequency response of FFT Window '
'(can be modified in the "Frequency" tab)</span>')
self.but_fft_win.setCheckable(True)
self.but_fft_win.setChecked(False)
layH_ctrl_run = QHBoxLayout()
layH_ctrl_run.addWidget(self.but_run)
#layH_ctrl_run.addWidget(self.lbl_sim_select)
layH_ctrl_run.addWidget(self.cmb_sim_select)
layH_ctrl_run.addWidget(self.chk_auto_run)
layH_ctrl_run.addStretch(1)
layH_ctrl_run.addWidget(self.lbl_N_start)
layH_ctrl_run.addWidget(self.led_N_start)
layH_ctrl_run.addStretch(1)
layH_ctrl_run.addWidget(self.lbl_N_points)
layH_ctrl_run.addWidget(self.led_N_points)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.chk_fx_scale)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.chk_stim_options)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.but_fft_win)
layH_ctrl_run.addStretch(10)
#layH_ctrl_run.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_run = QWidget(self)
self.wdg_ctrl_run.setLayout(layH_ctrl_run)
# --- end of run control ----------------------------------------
# ----------- ---------------------------------------------------
# Controls for time domain
# ---------------------------------------------------------------
plot_styles_list = ["None","Dots","Line","Line*","Stem","Stem*","Step","Step*"]
lbl_plt_time_title = QLabel("<b>View:</b>", self)
self.lbl_plt_time_stim = QLabel(to_html("Stimulus x", frmt='bi'), self)
self.cmb_plt_time_stim = QComboBox(self)
self.cmb_plt_time_stim.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_stim, self.plt_time_stim)
self.cmb_plt_time_stim.setToolTip("<span>Plot style for stimulus.</span>")
self.lbl_plt_time_stmq = QLabel(to_html(" Fixp. Stim. x_Q", frmt='bi'), self)
self.cmb_plt_time_stmq = QComboBox(self)
self.cmb_plt_time_stmq.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_stmq, self.plt_time_stmq)
self.cmb_plt_time_stmq.setToolTip("<span>Plot style for <em>fixpoint</em> (quantized) stimulus.</span>")
lbl_plt_time_resp = QLabel(to_html(" Response y", frmt='bi'), self)
self.cmb_plt_time_resp = QComboBox(self)
self.cmb_plt_time_resp.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_resp, self.plt_time_resp)
self.cmb_plt_time_resp.setToolTip("<span>Plot style for response.</span>")
lbl_win_time = QLabel(to_html(" FFT Window", frmt='bi'), self)
self.chk_win_time = QCheckBox(self)
self.chk_win_time.setObjectName("chk_win_time")
self.chk_win_time.setToolTip('<span>Show FFT windowing function (can be modified in the "Frequency" tab).</span>')
self.chk_win_time.setChecked(False)
lbl_log_time = QLabel(to_html("dB", frmt='b'), self)
self.chk_log_time = QCheckBox(self)
self.chk_log_time.setObjectName("chk_log_time")
self.chk_log_time.setToolTip("<span>Logarithmic scale for y-axis.</span>")
self.chk_log_time.setChecked(False)
self.lbl_log_bottom_time = QLabel(to_html("min =", frmt='bi'), self)
self.lbl_log_bottom_time.setVisible(True)
self.led_log_bottom_time = QLineEdit(self)
self.led_log_bottom_time.setText(str(self.bottom_t))
self.led_log_bottom_time.setToolTip("<span>Minimum display value for time "
"and spectrogram plots with log. scale.</span>")
self.led_log_bottom_time.setVisible(True)
lbl_plt_time_spgr = QLabel(to_html(" Spectrogram", frmt='bi'), self)
self.cmb_plt_time_spgr = QComboBox(self)
self.cmb_plt_time_spgr.addItems(["None", "x[n]", "x_q[n]", "y[n]"])
qset_cmb_box(self.cmb_plt_time_spgr, self.plt_time_spgr)
self.cmb_plt_time_spgr.setToolTip("<span>Show Spectrogram for selected signal.</span>")
spgr_en = self.plt_time_spgr != "None"
self.lbl_log_spgr_time = QLabel(to_html(" dB", frmt='b'), self)
self.lbl_log_spgr_time.setVisible(spgr_en)
self.chk_log_spgr_time = QCheckBox(self)
self.chk_log_spgr_time.setObjectName("chk_log_spgr")
self.chk_log_spgr_time.setToolTip("<span>Logarithmic scale for spectrogram.</span>")
self.chk_log_spgr_time.setChecked(True)
self.chk_log_spgr_time.setVisible(spgr_en)
self.lbl_nfft_spgr_time = QLabel(to_html(" N_FFT =", frmt='bi'), self)
self.lbl_nfft_spgr_time.setVisible(spgr_en)
self.led_nfft_spgr_time = QLineEdit(self)
self.led_nfft_spgr_time.setText(str(self.nfft_spgr_time))
self.led_nfft_spgr_time.setToolTip("<span>Number of FFT points per spectrogram segment.</span>")
self.led_nfft_spgr_time.setVisible(spgr_en)
self.lbl_ovlp_spgr_time = QLabel(to_html(" N_OVLP =", frmt='bi'), self)
self.lbl_ovlp_spgr_time.setVisible(spgr_en)
self.led_ovlp_spgr_time = QLineEdit(self)
self.led_ovlp_spgr_time.setText(str(self.ovlp_spgr_time))
self.led_ovlp_spgr_time.setToolTip("<span>Number of overlap data points between spectrogram segments.</span>")
self.led_ovlp_spgr_time.setVisible(spgr_en)
self.lbl_mode_spgr_time = QLabel(to_html(" Mode", frmt='bi'), self)
self.lbl_mode_spgr_time.setVisible(spgr_en)
self.cmb_mode_spgr_time = QComboBox(self)
spgr_modes = [("PSD","psd"), ("Mag.","magnitude"),\
("Angle","angle"), ("Phase","phase")]
for i in spgr_modes:
self.cmb_mode_spgr_time.addItem(*i)
qset_cmb_box(self.cmb_mode_spgr_time, self.mode_spgr_time, data=True)
self.cmb_mode_spgr_time.setToolTip("<span>Spectrogram display mode.</span>")
self.cmb_mode_spgr_time.setVisible(spgr_en)
self.lbl_byfs_spgr_time = QLabel(to_html(" per f_S", frmt='b'), self)
self.lbl_byfs_spgr_time.setVisible(spgr_en)
self.chk_byfs_spgr_time = QCheckBox(self)
self.chk_byfs_spgr_time.setObjectName("chk_log_spgr")
self.chk_byfs_spgr_time.setToolTip("<span>Display spectral density i.e. scale by f_S</span>")
self.chk_byfs_spgr_time.setChecked(True)
self.chk_byfs_spgr_time.setVisible(spgr_en)
# self.lbl_colorbar_time = QLabel(to_html(" Col.bar", frmt='b'), self)
# self.lbl_colorbar_time.setVisible(spgr_en)
# self.chk_colorbar_time = QCheckBox(self)
# self.chk_colorbar_time.setObjectName("chk_colorbar_time")
# self.chk_colorbar_time.setToolTip("<span>Enable colorbar</span>")
# self.chk_colorbar_time.setChecked(True)
# self.chk_colorbar_time.setVisible(spgr_en)
self.chk_fx_limits = QCheckBox("Min/max.", self)
self.chk_fx_limits.setObjectName("chk_fx_limits")
self.chk_fx_limits.setToolTip("<span>Display limits of fixpoint range.</span>")
self.chk_fx_limits.setChecked(False)
layH_ctrl_time = QHBoxLayout()
layH_ctrl_time.addWidget(lbl_plt_time_title)
layH_ctrl_time.addStretch(1)
layH_ctrl_time.addWidget(self.lbl_plt_time_stim)
layH_ctrl_time.addWidget(self.cmb_plt_time_stim)
#
layH_ctrl_time.addWidget(self.lbl_plt_time_stmq)
layH_ctrl_time.addWidget(self.cmb_plt_time_stmq)
#
layH_ctrl_time.addWidget(lbl_plt_time_resp)
layH_ctrl_time.addWidget(self.cmb_plt_time_resp)
#
layH_ctrl_time.addWidget(lbl_win_time)
layH_ctrl_time.addWidget(self.chk_win_time)
layH_ctrl_time.addStretch(1)
layH_ctrl_time.addWidget(lbl_log_time)
layH_ctrl_time.addWidget(self.chk_log_time)
layH_ctrl_time.addWidget(self.lbl_log_bottom_time)
layH_ctrl_time.addWidget(self.led_log_bottom_time)
#
layH_ctrl_time.addStretch(1)
#
layH_ctrl_time.addWidget(lbl_plt_time_spgr)
layH_ctrl_time.addWidget(self.cmb_plt_time_spgr)
layH_ctrl_time.addWidget(self.lbl_log_spgr_time)
layH_ctrl_time.addWidget(self.chk_log_spgr_time)
layH_ctrl_time.addWidget(self.lbl_nfft_spgr_time)
layH_ctrl_time.addWidget(self.led_nfft_spgr_time)
layH_ctrl_time.addWidget(self.lbl_ovlp_spgr_time)
layH_ctrl_time.addWidget(self.led_ovlp_spgr_time)
layH_ctrl_time.addWidget(self.lbl_mode_spgr_time)
layH_ctrl_time.addWidget(self.cmb_mode_spgr_time)
layH_ctrl_time.addWidget(self.lbl_byfs_spgr_time)
layH_ctrl_time.addWidget(self.chk_byfs_spgr_time)
layH_ctrl_time.addStretch(2)
layH_ctrl_time.addWidget(self.chk_fx_limits)
layH_ctrl_time.addStretch(10)
#layH_ctrl_time.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_time = QWidget(self)
self.wdg_ctrl_time.setLayout(layH_ctrl_time)
# ---- end time domain ------------------
# ---------------------------------------------------------------
# Controls for frequency domain
# ---------------------------------------------------------------
lbl_plt_freq_title = QLabel("<b>View:</b>", self)
self.lbl_plt_freq_stim = QLabel(to_html("Stimulus X", frmt='bi'), self)
self.cmb_plt_freq_stim = QComboBox(self)
self.cmb_plt_freq_stim.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_stim, self.plt_freq_stim)
self.cmb_plt_freq_stim.setToolTip("<span>Plot style for stimulus.</span>")
self.lbl_plt_freq_stmq = QLabel(to_html(" Fixp. Stim. X_Q", frmt='bi'), self)
self.cmb_plt_freq_stmq = QComboBox(self)
self.cmb_plt_freq_stmq.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_stmq, self.plt_freq_stmq)
self.cmb_plt_freq_stmq.setToolTip("<span>Plot style for <em>fixpoint</em> (quantized) stimulus.</span>")
lbl_plt_freq_resp = QLabel(to_html(" Response Y", frmt='bi'), self)
self.cmb_plt_freq_resp = QComboBox(self)
self.cmb_plt_freq_resp.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_resp, self.plt_freq_resp)
self.cmb_plt_freq_resp.setToolTip("<span>Plot style for response.</span>")
lbl_log_freq = QLabel(to_html("dB", frmt='b'), self)
self.chk_log_freq = QCheckBox(self)
self.chk_log_freq.setObjectName("chk_log_freq")
self.chk_log_freq.setToolTip("<span>Logarithmic scale for y-axis.</span>")
self.chk_log_freq.setChecked(True)
self.lbl_log_bottom_freq = QLabel(to_html("min =", frmt='bi'), self)
self.lbl_log_bottom_freq.setVisible(self.chk_log_freq.isChecked())
self.led_log_bottom_freq = QLineEdit(self)
self.led_log_bottom_freq.setText(str(self.bottom_f))
self.led_log_bottom_freq.setToolTip("<span>Minimum display value for log. scale.</span>")
self.led_log_bottom_freq.setVisible(self.chk_log_freq.isChecked())
if not self.chk_log_freq.isChecked():
self.bottom_f = 0
lbl_re_im_freq = QLabel(to_html("Re / Im", frmt='b'), self)
self.chk_re_im_freq = QCheckBox(self)
self.chk_re_im_freq.setObjectName("chk_re_im_freq")
self.chk_re_im_freq.setToolTip("<span>Show real and imaginary part of spectrum</span>")
self.chk_re_im_freq.setChecked(False)
self.lbl_win_fft = QLabel(to_html("Window", frmt='bi'), self)
self.cmb_win_fft = QComboBox(self)
self.cmb_win_fft.addItems(get_window_names())
self.cmb_win_fft.setToolTip("FFT window type.")
qset_cmb_box(self.cmb_win_fft, self.window_name)
self.cmb_win_fft_variant = QComboBox(self)
self.cmb_win_fft_variant.setToolTip("FFT window variant.")
self.cmb_win_fft_variant.setVisible(False)
self.lblWinPar1 = QLabel("Param1")
self.ledWinPar1 = QLineEdit(self)
self.ledWinPar1.setText("1")
self.ledWinPar1.setObjectName("ledWinPar1")
self.lblWinPar2 = QLabel("Param2")
self.ledWinPar2 = QLineEdit(self)
self.ledWinPar2.setText("2")
self.ledWinPar2.setObjectName("ledWinPar2")
self.chk_Hf = QCheckBox(self)
self.chk_Hf.setObjectName("chk_Hf")
self.chk_Hf.setToolTip("<span>Show ideal frequency response, calculated "
"from the filter coefficients.</span>")
self.chk_Hf.setChecked(False)
self.chk_Hf_lbl = QLabel(to_html("H_id (f)", frmt="bi"), self)
lbl_show_info_freq = QLabel(to_html("Info", frmt='b'), self)
self.chk_show_info_freq = QCheckBox(self)
self.chk_show_info_freq.setObjectName("chk_show_info_freq")
self.chk_show_info_freq.setToolTip("<span>Show infos about signal power "
"and window properties.</span>")
self.chk_show_info_freq.setChecked(False)
layH_ctrl_freq = QHBoxLayout()
layH_ctrl_freq.addWidget(lbl_plt_freq_title)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stim)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stim)
#
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stmq)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stmq)
#
layH_ctrl_freq.addWidget(lbl_plt_freq_resp)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_resp)
#
layH_ctrl_freq.addWidget(self.chk_Hf_lbl)
layH_ctrl_freq.addWidget(self.chk_Hf)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(lbl_log_freq)
layH_ctrl_freq.addWidget(self.chk_log_freq)
layH_ctrl_freq.addWidget(self.lbl_log_bottom_freq)
layH_ctrl_freq.addWidget(self.led_log_bottom_freq)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(lbl_re_im_freq)
layH_ctrl_freq.addWidget(self.chk_re_im_freq)
layH_ctrl_freq.addStretch(2)
layH_ctrl_freq.addWidget(self.lbl_win_fft)
layH_ctrl_freq.addWidget(self.cmb_win_fft)
layH_ctrl_freq.addWidget(self.cmb_win_fft_variant)
layH_ctrl_freq.addWidget(self.lblWinPar1)
layH_ctrl_freq.addWidget(self.ledWinPar1)
layH_ctrl_freq.addWidget(self.lblWinPar2)
layH_ctrl_freq.addWidget(self.ledWinPar2)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(lbl_show_info_freq)
layH_ctrl_freq.addWidget(self.chk_show_info_freq)
layH_ctrl_freq.addStretch(10)
#layH_ctrl_freq.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_freq = QWidget(self)
self.wdg_ctrl_freq.setLayout(layH_ctrl_freq)
# ---- end Frequency Domain ------------------
# ---------------------------------------------------------------
# Controls for stimuli
# ---------------------------------------------------------------
lbl_title_stim = QLabel("<b>Stimulus:</b>", self)
self.lblStimulus = QLabel(to_html("Type", frmt='bi'), self)
self.cmbStimulus = QComboBox(self)
self.cmbStimulus.addItems(["None","Impulse","Step","StepErr","Cos","Sine", "Chirp",
"Triang","Saw","Rect","Comb","AM","PM / FM","Formula"])
self.cmbStimulus.setToolTip("Stimulus type.")
qset_cmb_box(self.cmbStimulus, self.stim)
self.chk_stim_bl = QCheckBox("BL", self)
self.chk_stim_bl.setToolTip("<span>The signal is bandlimited to the Nyquist frequency "
"to avoid aliasing. However, it is much slower to generate "
"than the regular version.</span>")
self.chk_stim_bl.setChecked(True)
self.chk_stim_bl.setObjectName("stim_bl")
self.cmbChirpMethod = QComboBox(self)
for t in [("Lin","Linear"),("Square","Quadratic"),("Log", "Logarithmic"), ("Hyper", "Hyperbolic")]:
self.cmbChirpMethod.addItem(*t)
qset_cmb_box(self.cmbChirpMethod, self.chirp_method, data=False)
self.chk_scale_impz_f = QCheckBox("Scale", self)
self.chk_scale_impz_f.setToolTip("<span>Scale the FFT of the impulse response with <i>N<sub>FFT</sub></i> "
"so that it has the same magnitude as |H(f)|. DC and Noise need to be "
"turned off.</span>")
self.chk_scale_impz_f.setChecked(True)
self.chk_scale_impz_f.setObjectName("scale_impz_f")
self.lblDC = QLabel(to_html("DC =", frmt='bi'), self)
self.ledDC = QLineEdit(self)
self.ledDC.setText(str(self.DC))
self.ledDC.setToolTip("DC Level")
self.ledDC.setObjectName("stimDC")
layHCmbStim = QHBoxLayout()
layHCmbStim.addWidget(self.cmbStimulus)
layHCmbStim.addWidget(self.chk_stim_bl)
layHCmbStim.addWidget(self.chk_scale_impz_f)
layHCmbStim.addWidget(self.cmbChirpMethod)
#----------------------------------------------
self.lblAmp1 = QLabel(to_html(" A_1", frmt='bi') + " =", self)
self.ledAmp1 = QLineEdit(self)
self.ledAmp1.setText(str(self.A1))
self.ledAmp1.setToolTip("Stimulus amplitude, complex values like 3j - 1 are allowed")
self.ledAmp1.setObjectName("stimAmp1")
self.lblAmp2 = QLabel(to_html(" A_2", frmt='bi') + " =", self)
self.ledAmp2 = QLineEdit(self)
self.ledAmp2.setText(str(self.A2))
self.ledAmp2.setToolTip("Stimulus amplitude 2, complex values like 3j - 1 are allowed")
self.ledAmp2.setObjectName("stimAmp2")
#----------------------------------------------
self.lblPhi1 = QLabel(to_html(" φ_1", frmt='bi') + " =", self)
self.ledPhi1 = QLineEdit(self)
self.ledPhi1.setText(str(self.phi1))
self.ledPhi1.setToolTip("Stimulus phase")
self.ledPhi1.setObjectName("stimPhi1")
self.lblPhU1 = QLabel(to_html("°", frmt='b'), self)
self.lblPhi2 = QLabel(to_html(" φ_2", frmt='bi') + " =", self)
self.ledPhi2 = QLineEdit(self)
self.ledPhi2.setText(str(self.phi2))
self.ledPhi2.setToolTip("Stimulus phase 2")
self.ledPhi2.setObjectName("stimPhi2")
self.lblPhU2 = QLabel(to_html("°", frmt='b'), self)
#----------------------------------------------
self.lblFreq1 = QLabel(to_html(" f_1", frmt='bi') + " =", self)
self.ledFreq1 = QLineEdit(self)
self.ledFreq1.setText(str(self.f1))
self.ledFreq1.setToolTip("Stimulus frequency 1")
self.ledFreq1.setObjectName("stimFreq1")
self.lblFreqUnit1 = QLabel("f_S", self)
self.lblFreq2 = QLabel(to_html(" f_2", frmt='bi') + " =", self)
self.ledFreq2 = QLineEdit(self)
self.ledFreq2.setText(str(self.f2))
self.ledFreq2.setToolTip("Stimulus frequency 2")
self.ledFreq2.setObjectName("stimFreq2")
self.lblFreqUnit2 = QLabel("f_S", self)
#----------------------------------------------
self.lblNoise = QLabel(to_html(" Noise", frmt='bi'), self)
self.cmbNoise = QComboBox(self)
self.cmbNoise.addItems(["None","Gauss","Uniform","PRBS"])
self.cmbNoise.setToolTip("Type of additive noise.")
qset_cmb_box(self.cmbNoise, self.noise)
self.lblNoi = QLabel("not initialized", self)
self.ledNoi = QLineEdit(self)
self.ledNoi.setText(str(self.noi))
self.ledNoi.setToolTip("not initialized")
self.ledNoi.setObjectName("stimNoi")
layGStim = QGridLayout()
layGStim.addWidget(self.lblStimulus, 0, 0)
layGStim.addWidget(self.lblDC, 1, 0)
layGStim.addLayout(layHCmbStim, 0, 1)
layGStim.addWidget(self.ledDC, 1, 1)
layGStim.addWidget(self.lblAmp1, 0, 2)
layGStim.addWidget(self.lblAmp2, 1, 2)
layGStim.addWidget(self.ledAmp1, 0, 3)
layGStim.addWidget(self.ledAmp2, 1, 3)
layGStim.addWidget(self.lblPhi1, 0, 4)
layGStim.addWidget(self.lblPhi2, 1, 4)
layGStim.addWidget(self.ledPhi1, 0, 5)
layGStim.addWidget(self.ledPhi2, 1, 5)
layGStim.addWidget(self.lblPhU1, 0, 6)
layGStim.addWidget(self.lblPhU2, 1, 6)
layGStim.addWidget(self.lblFreq1, 0, 7)
layGStim.addWidget(self.lblFreq2, 1, 7)
layGStim.addWidget(self.ledFreq1, 0, 8)
layGStim.addWidget(self.ledFreq2, 1, 8)
layGStim.addWidget(self.lblFreqUnit1, 0, 9)
layGStim.addWidget(self.lblFreqUnit2, 1, 9)
layGStim.addWidget(self.lblNoise, 0, 10)
layGStim.addWidget(self.lblNoi, 1, 10)
layGStim.addWidget(self.cmbNoise, 0, 11)
layGStim.addWidget(self.ledNoi, 1, 11)
#----------------------------------------------
self.lblStimFormula = QLabel(to_html("x =", frmt='bi'), self)
self.ledStimFormula = QLineEdit(self)
self.ledStimFormula.setText(str(self.stim_formula))
self.ledStimFormula.setToolTip("<span>Enter formula for stimulus in numexpr syntax"
"</span>")
self.ledStimFormula.setObjectName("stimFormula")
layH_ctrl_stim_formula = QHBoxLayout()
layH_ctrl_stim_formula.addWidget(self.lblStimFormula)
layH_ctrl_stim_formula.addWidget(self.ledStimFormula,10)
#----------------------------------------------
#layG_ctrl_stim = QGridLayout()
layH_ctrl_stim_par = QHBoxLayout()
layH_ctrl_stim_par.addLayout(layGStim)
layV_ctrl_stim = QVBoxLayout()
layV_ctrl_stim.addLayout(layH_ctrl_stim_par)
layV_ctrl_stim.addLayout(layH_ctrl_stim_formula)
layH_ctrl_stim = QHBoxLayout()
layH_ctrl_stim.addWidget(lbl_title_stim)
layH_ctrl_stim.addStretch(1)
layH_ctrl_stim.addLayout(layV_ctrl_stim)
layH_ctrl_stim.addStretch(10)
self.wdg_ctrl_stim = QWidget(self)
self.wdg_ctrl_stim.setLayout(layH_ctrl_stim)
# --------- end stimuli ---------------------------------
# frequency widgets require special handling as they are scaled with f_s
self.ledFreq1.installEventFilter(self)
self.ledFreq2.installEventFilter(self)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
# --- run control ---
self.led_N_start.editingFinished.connect(self.update_N)
self.led_N_points.editingFinished.connect(self.update_N)
# --- frequency control ---
# careful! currentIndexChanged passes the current index to _update_win_fft
self.cmb_win_fft.currentIndexChanged.connect(self._update_win_fft)
self.ledWinPar1.editingFinished.connect(self._read_param1)
self.ledWinPar2.editingFinished.connect(self._read_param2)
# --- stimulus control ---
self.chk_stim_options.clicked.connect(self._show_stim_options)
self.chk_stim_bl.clicked.connect(self._enable_stim_widgets)
self.cmbStimulus.currentIndexChanged.connect(self._enable_stim_widgets)
self.cmbNoise.currentIndexChanged.connect(self._update_noi)
self.ledNoi.editingFinished.connect(self._update_noi)
self.ledAmp1.editingFinished.connect(self._update_amp1)
self.ledAmp2.editingFinished.connect(self._update_amp2)
self.ledPhi1.editingFinished.connect(self._update_phi1)
self.ledPhi2.editingFinished.connect(self._update_phi2)
self.cmbChirpMethod.currentIndexChanged.connect(self._update_chirp_method)
self.ledDC.editingFinished.connect(self._update_DC)
self.ledStimFormula.editingFinished.connect(self._update_stim_formula)
#------------------------------------------------------------------------------
def eventFilter(self, source, event):
"""
Filter all events generated by the monitored widgets. Source and type
of all events generated by monitored objects are passed to this eventFilter,
evaluated and passed on to the next hierarchy level.
- When a QLineEdit widget gains input focus (``QEvent.FocusIn``), display
the stored value from filter dict with full precision
- When a key is pressed inside the text field, set the `spec_edited` flag
to True.
- When a QLineEdit widget loses input focus (``QEvent.FocusOut``), store
current value normalized to f_S with full precision (only if
``spec_edited == True``) and display the stored value in selected format
"""
def _store_entry(source):
if self.spec_edited:
if source.objectName() == "stimFreq1":
self.f1 = safe_eval(source.text(), self.f1 * fb.fil[0]['f_S'],
return_type='float') / fb.fil[0]['f_S']
source.setText(str(params['FMT'].format(self.f1 * fb.fil[0]['f_S'])))
elif source.objectName() == "stimFreq2":
self.f2 = safe_eval(source.text(), self.f2 * fb.fil[0]['f_S'],
return_type='float') / fb.fil[0]['f_S']
source.setText(str(params['FMT'].format(self.f2 * fb.fil[0]['f_S'])))
self.spec_edited = False # reset flag
self.sig_tx.emit({'sender':__name__, 'ui_changed':'stim'})
# if isinstance(source, QLineEdit):
# if source.objectName() in {"stimFreq1","stimFreq2"}:
if event.type() in {QEvent.FocusIn,QEvent.KeyPress, QEvent.FocusOut}:
if event.type() == QEvent.FocusIn:
self.spec_edited = False
self.load_fs()
elif event.type() == QEvent.KeyPress:
self.spec_edited = True # entry has been changed
key = event.key()
if key in {Qt.Key_Return, Qt.Key_Enter}:
_store_entry(source)
elif key == Qt.Key_Escape: # revert changes
self.spec_edited = False
if source.objectName() == "stimFreq1":
source.setText(str(params['FMT'].format(self.f1 * fb.fil[0]['f_S'])))
elif source.objectName() == "stimFreq2":
source.setText(str(params['FMT'].format(self.f2 * fb.fil[0]['f_S'])))
elif event.type() == QEvent.FocusOut:
_store_entry(source)
# Call base class method to continue normal event processing:
return super(PlotImpz_UI, self).eventFilter(source, event)
#-------------------------------------------------------------
def _show_stim_options(self):
"""
Hide / show panel with stimulus options
"""
self.wdg_ctrl_stim.setVisible(self.chk_stim_options.isChecked())
def _enable_stim_widgets(self):
""" Enable / disable widgets depending on the selected stimulus"""
self.stim = qget_cmb_box(self.cmbStimulus, data=False)
f1_en = self.stim in {"Cos","Sine","Chirp","PM / FM","AM","Formula","Rect","Saw","Triang","Comb"}
f2_en = self.stim in {"Cos","Sine","Chirp","PM / FM","AM","Formula"}
dc_en = self.stim not in {"Step", "StepErr"}
self.chk_stim_bl.setVisible(self.stim in {"Triang", "Saw", "Rect"})
self.lblAmp1.setVisible(self.stim != "None")
self.ledAmp1.setVisible(self.stim != "None")
self.chk_scale_impz_f.setVisible(self.stim == 'Impulse')
self.chk_scale_impz_f.setEnabled((self.noi == 0 or self.cmbNoise.currentText() == 'None')\
and self.DC == 0)
self.cmbChirpMethod.setVisible(self.stim == 'Chirp')
self.lblPhi1.setVisible(f1_en)
self.ledPhi1.setVisible(f1_en)
self.lblPhU1.setVisible(f1_en)
self.lblFreq1.setVisible(f1_en)
self.ledFreq1.setVisible(f1_en)
self.lblFreqUnit1.setVisible(f1_en)
self.lblFreq2.setVisible(f2_en)
self.ledFreq2.setVisible(f2_en)
self.lblFreqUnit2.setVisible(f2_en)
self.lblAmp2.setVisible(f2_en and self.stim != "Chirp")
self.ledAmp2.setVisible(f2_en and self.stim != "Chirp")
self.lblPhi2.setVisible(f2_en and self.stim != "Chirp")
self.ledPhi2.setVisible(f2_en and self.stim != "Chirp")
self.lblPhU2.setVisible(f2_en and self.stim != "Chirp")
self.lblDC.setVisible(dc_en)
self.ledDC.setVisible(dc_en)
self.lblStimFormula.setVisible(self.stim == "Formula")
self.ledStimFormula.setVisible(self.stim == "Formula")
self.sig_tx.emit({'sender':__name__, 'ui_changed':'stim'})
#-------------------------------------------------------------
def load_fs(self):
"""
Reload sampling frequency from filter dictionary and transform
the displayed frequency spec input fields according to the units
setting (i.e. f_S). Spec entries are always stored normalized w.r.t. f_S
in the dictionary; when f_S or the unit are changed, only the displayed values
of the frequency entries are updated, not the dictionary!
load_fs() is called during init and when the frequency unit or the
sampling frequency have been changed.
It should be called when sigSpecsChanged or sigFilterDesigned is emitted
at another place, indicating that a reload is required.
"""
# recalculate displayed freq spec values for (maybe) changed f_S
if self.ledFreq1.hasFocus():
# widget has focus, show full precision
self.ledFreq1.setText(str(self.f1 * fb.fil[0]['f_S']))
elif self.ledFreq2.hasFocus():
# widget has focus, show full precision
self.ledFreq2.setText(str(self.f2 * fb.fil[0]['f_S']))
else:
# widgets have no focus, round the display
self.ledFreq1.setText(
str(params['FMT'].format(self.f1 * fb.fil[0]['f_S'])))
self.ledFreq2.setText(
str(params['FMT'].format(self.f2 * fb.fil[0]['f_S'])))
def _update_amp1(self):
""" Update value for self.A1 from QLineEditWidget"""
self.A1 = safe_eval(self.ledAmp1.text(), self.A1, return_type='cmplx')
self.ledAmp1.setText(str(self.A1))
self.sig_tx.emit({'sender':__name__, 'ui_changed':'a1'})
def _update_amp2(self):
""" Update value for self.A2 from the QLineEditWidget"""
self.A2 = safe_eval(self.ledAmp2.text(), self.A2, return_type='cmplx')
self.ledAmp2.setText(str(self.A2))
self.sig_tx.emit({'sender':__name__, 'ui_changed':'a2'})
def _update_phi1(self):
""" Update value for self.phi1 from QLineEditWidget"""
self.phi1 = safe_eval(self.ledPhi1.text(), self.phi1, return_type='float')
self.ledPhi1.setText(str(self.phi1))
self.sig_tx.emit({'sender':__name__, 'ui_changed':'phi1'})
def _update_phi2(self):
""" Update value for self.phi2 from the QLineEditWidget"""
self.phi2 = safe_eval(self.ledPhi2.text(), self.phi2, return_type='float')
self.ledPhi2.setText(str(self.phi2))
self.sig_tx.emit({'sender':__name__, 'ui_changed':'phi2'})
def _update_chirp_method(self):
""" Update value for self.chirp_method from the QLineEditWidget"""
self.chirp_method = qget_cmb_box(self.cmbChirpMethod) # read current data string
self.sig_tx.emit({'sender':__name__, 'ui_changed':'chirp_method'})
def _update_noi(self):
""" Update type + value + label for self.noi for noise"""
self.noise = qget_cmb_box(self.cmbNoise, data=False).lower()
self.lblNoi.setVisible(self.noise!='none')
self.ledNoi.setVisible(self.noise!='none')
if self.noise!='none':
self.noi = safe_eval(self.ledNoi.text(), 0, return_type='cmplx')
self.ledNoi.setText(str(self.noi))
if self.noise == 'gauss':
self.lblNoi.setText(to_html(" σ =", frmt='bi'))
self.ledNoi.setToolTip("<span>Standard deviation of statistical process,"
"noise power is <i>P</i> = σ<sup>2</sup></span>")
elif self.noise == 'uniform':
self.lblNoi.setText(to_html(" Δ =", frmt='bi'))
self.ledNoi.setToolTip("<span>Interval size for uniformly distributed process "
"(e.g. quantization step size for quantization noise), "
"centered around 0. Noise power is "
"<i>P</i> = Δ<sup>2</sup>/12.</span>")
elif self.noise == 'prbs':
self.lblNoi.setText(to_html(" A =", frmt='bi'))
self.ledNoi.setToolTip("<span>Amplitude of bipolar Pseudorandom Binary Sequence. "
"Noise power is <i>P</i> = A<sup>2</sup>.</span>")
self.sig_tx.emit({'sender':__name__, 'ui_changed':'noi'})
def _update_DC(self):
""" Update value for self.DC from the QLineEditWidget"""
self.DC = safe_eval(self.ledDC.text(), 0, return_type='cmplx')
self.ledDC.setText(str(self.DC))
self.sig_tx.emit({'sender':__name__, 'ui_changed':'dc'})
def _update_stim_formula(self):
"""Update string with formula to be evaluated by numexpr"""
self.stim_formula = self.ledStimFormula.text().strip()
self.ledStimFormula.setText(str(self.stim_formula))
self.sig_tx.emit({'sender':__name__, 'ui_changed':'stim_formula'})
# -------------------------------------------------------------------------
def update_N(self, emit=True):
# called directly from impz or locally
# between local triggering and updates upstream
"""
Update values for self.N and self.N_start from the QLineEditWidget,
update the window and fire "ui_changed"
"""
if not isinstance(emit, bool):
logger.error("update N: emit={0}".format(emit))
self.N_start = safe_eval(self.led_N_start.text(), self.N_start, return_type='int', sign='poszero')
self.led_N_start.setText(str(self.N_start)) # update widget
self.N_user = safe_eval(self.led_N_points.text(), self.N_user, return_type='int', sign='poszero')
if self.N_user == 0: # automatic calculation
self.N = self.calc_n_points(self.N_user) # widget remains set to 0
self.led_N_points.setText("0") # update widget
else:
self.N = self.N_user
self.led_N_points.setText(str(self.N)) # update widget
self.N_end = self.N + self.N_start # total number of points to be calculated: N + N_start
# FFT window needs to be updated due to changed number of data points
self._update_win_fft(emit=False) # don't emit anything here
if emit:
self.sig_tx.emit({'sender':__name__, 'ui_changed':'N'})
def _read_param1(self):
"""Read out textbox when editing is finished and update dict and fft window"""
param = safe_eval(self.ledWinPar1.text(), self.win_dict['par'][0]['val'],
return_type='float')
if param < self.win_dict['par'][0]['min']:
param = self.win_dict['par'][0]['min']
elif param > self.win_dict['par'][0]['max']:
param = self.win_dict['par'][0]['max']
self.ledWinPar1.setText(str(param))
self.win_dict['par'][0]['val'] = param
self._update_win_fft()
def _read_param2(self):
"""Read out textbox when editing is finished and update dict and fft window"""
param = safe_eval(self.ledWinPar2.text(), self.win_dict['par'][1]['val'],
return_type='float')
if param < self.win_dict['par'][1]['min']:
param = self.win_dict['par'][1]['min']
elif param > self.win_dict['par'][1]['max']:
param = self.win_dict['par'][1]['max']
self.ledWinPar2.setText(str(param))
self.win_dict['par'][1]['val'] = param
self._update_win_fft()
#------------------------------------------------------------------------------
def _update_win_fft(self, arg=None, emit=True):
"""
Update window type for FFT with different arguments:
- signal-slot connection to combo-box -> index (int), absorbed by `arg`
emit is not set -> emit=True
- called by _read_param() -> empty -> emit=True
- called by update_N(emit=False)
"""
if not isinstance(emit, bool):
logger.error("update win: emit={0}".format(emit))
self.window_name = qget_cmb_box(self.cmb_win_fft, data=False)
self.win = calc_window_function(self.win_dict, self.window_name,
N=self.N, sym=False)
n_par = self.win_dict['n_par']
self.lblWinPar1.setVisible(n_par > 0)
self.ledWinPar1.setVisible(n_par > 0)
self.lblWinPar2.setVisible(n_par > 1)
self.ledWinPar2.setVisible(n_par > 1)
if n_par > 0:
self.lblWinPar1.setText(to_html(self.win_dict['par'][0]['name'] + " =", frmt='bi'))
self.ledWinPar1.setText(str(self.win_dict['par'][0]['val']))
self.ledWinPar1.setToolTip(self.win_dict['par'][0]['tooltip'])
if n_par > 1:
self.lblWinPar2.setText(to_html(self.win_dict['par'][1]['name'] + " =", frmt='bi'))
self.ledWinPar2.setText(str(self.win_dict['par'][1]['val']))
self.ledWinPar2.setToolTip(self.win_dict['par'][1]['tooltip'])
self.nenbw = self.N * np.sum(np.square(self.win)) / (np.square(np.sum(self.win)))
self.cgain = np.sum(self.win) / self.N # coherent gain
self.win /= self.cgain # correct gain for periodic signals
# only emit a signal for local triggers to prevent infinite loop:
# - signal-slot connection passes a bool or an integer
# - local function calls don't pass anything
if emit is True:
self.sig_tx.emit({'sender':__name__, 'ui_changed':'win'})
# ... but always notify the FFT widget via sig_tx_fft
self.sig_tx_fft.emit({'sender':__name__, 'view_changed':'win'})
#------------------------------------------------------------------------------
def show_fft_win(self):
"""
Pop-up FFT window
"""
if self.but_fft_win.isChecked():
qstyle_widget(self.but_fft_win, "changed")
else:
qstyle_widget(self.but_fft_win, "normal")
if self.fft_window is None: # no handle to the window? Create a new instance
if self.but_fft_win.isChecked():
# Important: Handle to window must be class attribute otherwise it
# (and the attached window) is deleted immediately when it goes out of scope
self.fft_window = Plot_FFT_win(self, win_dict=self.win_dict, sym=False,
title="pyFDA Spectral Window Viewer")
self.sig_tx_fft.connect(self.fft_window.sig_rx)
self.fft_window.sig_tx.connect(self.close_fft_win)
self.fft_window.show() # modeless i.e. non-blocking popup window
else:
if not self.but_fft_win.isChecked():
if self.fft_window is None:
logger.warning("FFT window is already closed!")
else:
self.fft_window.close()
def close_fft_win(self):
self.fft_window = None
self.but_fft_win.setChecked(False)
qstyle_widget(self.but_fft_win, "normal")
#------------------------------------------------------------------------------
def calc_n_points(self, N_user = 0):
"""
Calculate number of points to be displayed, depending on type of filter
(FIR, IIR) and user input. If the user selects 0 points, the number is
calculated automatically.
An improvement would be to calculate the dominant pole and the corresponding
settling time.
"""
if N_user == 0: # set number of data points automatically
if fb.fil[0]['ft'] == 'IIR':
N = 100
else:
N = min(len(fb.fil[0]['ba'][0]),100) # FIR: N = number of coefficients (max. 100)
else:
N = N_user
return N
def _construct_UI(self):
# ----------- ---------------------------------------------------
# Run control widgets
# ---------------------------------------------------------------
self.chk_auto_run = QCheckBox("Auto", self)
self.chk_auto_run.setObjectName("chk_auto_run")
self.chk_auto_run.setToolTip(
"<span>Update response automatically when "
"parameters have been changed.</span>")
self.chk_auto_run.setChecked(True)
self.but_run = QPushButton(self)
self.but_run.setText("RUN")
self.but_run.setToolTip("Run simulation")
self.but_run.setEnabled(not self.chk_auto_run.isChecked())
self.cmb_sim_select = QComboBox(self)
self.cmb_sim_select.addItems(["Float", "Fixpoint"])
qset_cmb_box(self.cmb_sim_select, "Float")
self.cmb_sim_select.setToolTip(
"<span>Simulate floating-point or fixpoint response."
"</span>")
self.lbl_N_points = QLabel(to_html("N", frmt='bi') + " =", self)
self.led_N_points = QLineEdit(self)
self.led_N_points.setText(str(self.N))
self.led_N_points.setToolTip(
"<span>Number of displayed data points. "
"<i>N</i> = 0 tries to choose for you.</span>")
self.lbl_N_start = QLabel(to_html("N_0", frmt='bi') + " =", self)
self.led_N_start = QLineEdit(self)
self.led_N_start.setText(str(self.N_start))
self.led_N_start.setToolTip("<span>First point to plot.</span>")
self.chk_fx_scale = QCheckBox("Int. scale", self)
self.chk_fx_scale.setObjectName("chk_fx_scale")
self.chk_fx_scale.setToolTip(
"<span>Display data with integer (fixpoint) scale.</span>")
self.chk_fx_scale.setChecked(False)
self.chk_stim_options = QCheckBox("Stim. Options", self)
self.chk_stim_options.setObjectName("chk_stim_options")
self.chk_stim_options.setToolTip("<span>Show stimulus options.</span>")
self.chk_stim_options.setChecked(True)
self.but_fft_win = QPushButton(self)
self.but_fft_win.setText("WIN FFT")
self.but_fft_win.setToolTip(
"Show time and frequency response of FFT Window")
self.but_fft_win.setCheckable(True)
self.but_fft_win.setChecked(False)
layH_ctrl_run = QHBoxLayout()
layH_ctrl_run.addWidget(self.but_run)
#layH_ctrl_run.addWidget(self.lbl_sim_select)
layH_ctrl_run.addWidget(self.cmb_sim_select)
layH_ctrl_run.addWidget(self.chk_auto_run)
layH_ctrl_run.addStretch(1)
layH_ctrl_run.addWidget(self.lbl_N_start)
layH_ctrl_run.addWidget(self.led_N_start)
layH_ctrl_run.addStretch(1)
layH_ctrl_run.addWidget(self.lbl_N_points)
layH_ctrl_run.addWidget(self.led_N_points)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.chk_fx_scale)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.chk_stim_options)
layH_ctrl_run.addStretch(2)
layH_ctrl_run.addWidget(self.but_fft_win)
layH_ctrl_run.addStretch(10)
#layH_ctrl_run.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_run = QWidget(self)
self.wdg_ctrl_run.setLayout(layH_ctrl_run)
# --- end of run control ----------------------------------------
# ----------- ---------------------------------------------------
# Controls for time domain
# ---------------------------------------------------------------
plot_styles_list = [
"None", "Dots", "Line", "Line*", "Stem", "Stem*", "Step", "Step*"
]
lbl_plt_time_title = QLabel("<b>View:</b>", self)
lbl_plt_time_resp = QLabel("Response " + to_html("y", frmt='bi'), self)
self.cmb_plt_time_resp = QComboBox(self)
self.cmb_plt_time_resp.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_resp, self.plt_time_resp)
self.cmb_plt_time_resp.setToolTip(
"<span>Plot style for response.</span>")
self.lbl_plt_time_stim = QLabel("Stimulus " + to_html("x", frmt='bi'),
self)
self.cmb_plt_time_stim = QComboBox(self)
self.cmb_plt_time_stim.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_stim, self.plt_time_stim)
self.cmb_plt_time_stim.setToolTip(
"<span>Plot style for stimulus.</span>")
self.lbl_plt_time_stmq = QLabel(
"Fixp. Stim. " + to_html("x_Q", frmt='bi'), self)
self.cmb_plt_time_stmq = QComboBox(self)
self.cmb_plt_time_stmq.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_time_stmq, self.plt_time_stmq)
self.cmb_plt_time_stmq.setToolTip(
"<span>Plot style for <em>fixpoint</em> (quantized) stimulus.</span>"
)
self.chk_log_time = QCheckBox("dB : min.", self)
self.chk_log_time.setObjectName("chk_log_time")
self.chk_log_time.setToolTip(
"<span>Logarithmic scale for y-axis.</span>")
self.chk_log_time.setChecked(False)
self.led_log_bottom_time = QLineEdit(self)
self.led_log_bottom_time.setText(str(self.bottom_t))
self.led_log_bottom_time.setToolTip(
"<span>Minimum display value for log. scale.</span>")
self.led_log_bottom_time.setVisible(self.chk_log_time.isChecked())
if not self.chk_log_time.isChecked():
self.chk_log_time.setText("dB")
self.bottom_t = 0
self.chk_win_time = QCheckBox("FFT Window", self)
self.chk_win_time.setObjectName("chk_win_time")
self.chk_win_time.setToolTip(
"<span>Show FFT windowing function.</span>")
self.chk_win_time.setChecked(False)
self.chk_fx_limits = QCheckBox("Min/max.", self)
self.chk_fx_limits.setObjectName("chk_fx_limits")
self.chk_fx_limits.setToolTip(
"<span>Display limits of fixpoint range.</span>")
self.chk_fx_limits.setChecked(False)
layH_ctrl_time = QHBoxLayout()
layH_ctrl_time.addWidget(lbl_plt_time_title)
layH_ctrl_time.addStretch(1)
layH_ctrl_time.addWidget(lbl_plt_time_resp)
layH_ctrl_time.addWidget(self.cmb_plt_time_resp)
layH_ctrl_time.addStretch(1)
layH_ctrl_time.addWidget(self.lbl_plt_time_stim)
layH_ctrl_time.addWidget(self.cmb_plt_time_stim)
layH_ctrl_time.addStretch(1)
layH_ctrl_time.addWidget(self.lbl_plt_time_stmq)
layH_ctrl_time.addWidget(self.cmb_plt_time_stmq)
layH_ctrl_time.addStretch(2)
layH_ctrl_time.addWidget(self.chk_log_time)
layH_ctrl_time.addWidget(self.led_log_bottom_time)
layH_ctrl_time.addStretch(1)
layH_ctrl_time.addWidget(self.chk_win_time)
layH_ctrl_time.addStretch(2)
layH_ctrl_time.addWidget(self.chk_fx_limits)
layH_ctrl_time.addStretch(10)
#layH_ctrl_time.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_time = QWidget(self)
self.wdg_ctrl_time.setLayout(layH_ctrl_time)
# ---- end time domain ------------------
# ---------------------------------------------------------------
# Controls for frequency domain
# ---------------------------------------------------------------
lbl_plt_freq_title = QLabel("<b>View:</b>", self)
lbl_plt_freq_resp = QLabel("Response " + to_html("Y", frmt='bi'), self)
self.cmb_plt_freq_resp = QComboBox(self)
self.cmb_plt_freq_resp.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_resp, self.plt_freq_resp)
self.cmb_plt_freq_resp.setToolTip(
"<span>Plot style for response.</span>")
self.lbl_plt_freq_stim = QLabel("Stimulus " + to_html("X", frmt='bi'),
self)
self.cmb_plt_freq_stim = QComboBox(self)
self.cmb_plt_freq_stim.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_stim, self.plt_freq_stim)
self.cmb_plt_freq_stim.setToolTip(
"<span>Plot style for stimulus.</span>")
self.lbl_plt_freq_stmq = QLabel(
"Fixp. Stim. " + to_html("X_Q", frmt='bi'), self)
self.cmb_plt_freq_stmq = QComboBox(self)
self.cmb_plt_freq_stmq.addItems(plot_styles_list)
qset_cmb_box(self.cmb_plt_freq_stmq, self.plt_freq_stmq)
self.cmb_plt_freq_stmq.setToolTip(
"<span>Plot style for <em>fixpoint</em> (quantized) stimulus.</span>"
)
self.chk_log_freq = QCheckBox("dB : min.", self)
self.chk_log_freq.setObjectName("chk_log_freq")
self.chk_log_freq.setToolTip(
"<span>Logarithmic scale for y-axis.</span>")
self.chk_log_freq.setChecked(True)
self.led_log_bottom_freq = QLineEdit(self)
self.led_log_bottom_freq.setText(str(self.bottom_f))
self.led_log_bottom_freq.setToolTip(
"<span>Minimum display value for log. scale.</span>")
self.led_log_bottom_freq.setVisible(self.chk_log_freq.isChecked())
if not self.chk_log_freq.isChecked():
self.chk_log_freq.setText("dB")
self.bottom_f = 0
self.lbl_win_fft = QLabel("Window: ", self)
self.cmb_win_fft = QComboBox(self)
self.cmb_win_fft.addItems(get_window_names())
self.cmb_win_fft.setToolTip("FFT window type.")
qset_cmb_box(self.cmb_win_fft, self.window_name)
self.cmb_win_fft_variant = QComboBox(self)
self.cmb_win_fft_variant.setToolTip("FFT window variant.")
self.cmb_win_fft_variant.setVisible(False)
self.lblWinPar1 = QLabel("Param1")
self.ledWinPar1 = QLineEdit(self)
self.ledWinPar1.setText("1")
self.ledWinPar1.setObjectName("ledWinPar1")
self.lblWinPar2 = QLabel("Param2")
self.ledWinPar2 = QLineEdit(self)
self.ledWinPar2.setText("2")
self.ledWinPar2.setObjectName("ledWinPar2")
self.chk_Hf = QCheckBox(self)
self.chk_Hf.setObjectName("chk_Hf")
self.chk_Hf.setToolTip(
"<span>Show ideal frequency response, calculated "
"from the filter coefficients.</span>")
self.chk_Hf.setChecked(False)
self.chk_Hf_lbl = QLabel(to_html("H_id (f)", frmt="bi"), self)
layH_ctrl_freq = QHBoxLayout()
layH_ctrl_freq.addWidget(lbl_plt_freq_title)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(lbl_plt_freq_resp)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_resp)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stim)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stim)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stmq)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stmq)
layH_ctrl_freq.addStretch(2)
layH_ctrl_freq.addWidget(self.chk_log_freq)
layH_ctrl_freq.addWidget(self.led_log_bottom_freq)
layH_ctrl_freq.addStretch(2)
layH_ctrl_freq.addWidget(self.lbl_win_fft)
layH_ctrl_freq.addWidget(self.cmb_win_fft)
layH_ctrl_freq.addWidget(self.cmb_win_fft_variant)
layH_ctrl_freq.addWidget(self.lblWinPar1)
layH_ctrl_freq.addWidget(self.ledWinPar1)
layH_ctrl_freq.addWidget(self.lblWinPar2)
layH_ctrl_freq.addWidget(self.ledWinPar2)
layH_ctrl_freq.addStretch(2)
layH_ctrl_freq.addWidget(self.chk_Hf)
layH_ctrl_freq.addWidget(self.chk_Hf_lbl)
layH_ctrl_freq.addStretch(10)
#layH_ctrl_freq.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_freq = QWidget(self)
self.wdg_ctrl_freq.setLayout(layH_ctrl_freq)
# ---- end Frequency Domain ------------------
# ---------------------------------------------------------------
# Controls for stimuli
# ---------------------------------------------------------------
lbl_title_stim = QLabel("<b>Stimulus:</b>", self)
self.lblStimulus = QLabel(to_html("Shape ", frmt='bi'), self)
self.cmbStimulus = QComboBox(self)
self.cmbStimulus.addItems([
"None", "Pulse", "Step", "StepErr", "Cos", "Sine", "Triang", "Saw",
"Rect", "Comb", "AM", "FM", "PM"
])
self.cmbStimulus.setToolTip("Stimulus type.")
qset_cmb_box(self.cmbStimulus, self.stim)
self.chk_stim_bl = QCheckBox("BL", self)
self.chk_stim_bl.setToolTip(
"<span>The signal is bandlimited to the Nyquist frequency "
"to avoid aliasing. However, it is much slower to generate "
"than the regular version.</span>")
self.chk_stim_bl.setChecked(True)
self.chk_stim_bl.setObjectName("stim_bl")
self.chk_scale_impz_f = QCheckBox("Scale", self)
self.chk_scale_impz_f.setToolTip(
"<span>Scale the FFT of the impulse response with <i>N<sub>FFT</sub></i> "
"so that it has the same magnitude as |H(f)|. DC and Noise need to be "
"turned off.</span>")
self.chk_scale_impz_f.setChecked(True)
self.chk_scale_impz_f.setObjectName("scale_impz_f")
self.lblDC = QLabel(to_html("DC =", frmt='bi'), self)
self.ledDC = QLineEdit(self)
self.ledDC.setText(str(self.DC))
self.ledDC.setToolTip("DC Level")
self.ledDC.setObjectName("stimDC")
layHCmbStim = QHBoxLayout()
layHCmbStim.addWidget(self.cmbStimulus)
layHCmbStim.addWidget(self.chk_stim_bl)
layHCmbStim.addWidget(self.chk_scale_impz_f)
layVlblCmbDC = QVBoxLayout()
layVlblCmbDC.addWidget(self.lblStimulus)
layVlblCmbDC.addWidget(self.lblDC)
#layVlblAmp.setAlignment(Qt.AlignTop)
layVCmbDC = QVBoxLayout()
layVCmbDC.addLayout(layHCmbStim)
layVCmbDC.addWidget(self.ledDC)
#----------------------------------------------
self.lblAmp1 = QLabel(to_html("A_1", frmt='bi') + " =", self)
self.ledAmp1 = QLineEdit(self)
self.ledAmp1.setText(str(self.A1))
self.ledAmp1.setToolTip("Stimulus amplitude")
self.ledAmp1.setObjectName("stimAmp1")
self.lblAmp2 = QLabel(to_html("A_2", frmt='bi') + " =", self)
self.ledAmp2 = QLineEdit(self)
self.ledAmp2.setText(str(self.A2))
self.ledAmp2.setToolTip("Stimulus amplitude 2")
self.ledAmp2.setObjectName("stimAmp2")
layVlblAmp = QVBoxLayout()
layVlblAmp.addWidget(self.lblAmp1)
layVlblAmp.addWidget(self.lblAmp2)
#layVlblAmp.setAlignment(Qt.AlignTop) # labels are aligned incorrectly
layVledAmp = QVBoxLayout()
layVledAmp.addWidget(self.ledAmp1)
layVledAmp.addWidget(self.ledAmp2)
#layVledAmp.setAlignment(Qt.AlignTop)
#----------------------------------------------
self.lblPhi1 = QLabel(to_html("φ_1", frmt='bi') + " =", self)
self.ledPhi1 = QLineEdit(self)
self.ledPhi1.setText(str(self.phi1))
self.ledPhi1.setToolTip("Stimulus phase")
self.ledPhi1.setObjectName("stimPhi1")
self.lblPhU1 = QLabel(to_html("°", frmt='b'), self)
self.lblPhi2 = QLabel(to_html("φ_2", frmt='bi') + " =", self)
self.ledPhi2 = QLineEdit(self)
self.ledPhi2.setText(str(self.phi2))
self.ledPhi2.setToolTip("Stimulus phase 2")
self.ledPhi2.setObjectName("stimPhi2")
self.lblPhU2 = QLabel(to_html("°", frmt='b'), self)
layVlblPhi = QVBoxLayout()
layVlblPhi.addWidget(self.lblPhi1)
layVlblPhi.addWidget(self.lblPhi2)
layVledPhi = QVBoxLayout()
layVledPhi.addWidget(self.ledPhi1)
layVledPhi.addWidget(self.ledPhi2)
layVlblPhU = QVBoxLayout()
layVlblPhU.addWidget(self.lblPhU1)
layVlblPhU.addWidget(self.lblPhU2)
#----------------------------------------------
self.lblFreq1 = QLabel(to_html("f_1", frmt='bi') + " =", self)
self.ledFreq1 = QLineEdit(self)
self.ledFreq1.setText(str(self.f1))
self.ledFreq1.setToolTip("Stimulus frequency 1")
self.ledFreq1.setObjectName("stimFreq1")
self.lblFreqUnit1 = QLabel("f_S", self)
self.lblFreq2 = QLabel(to_html("f_2", frmt='bi') + " =", self)
self.ledFreq2 = QLineEdit(self)
self.ledFreq2.setText(str(self.f2))
self.ledFreq2.setToolTip("Stimulus frequency 2")
self.ledFreq2.setObjectName("stimFreq2")
self.lblFreqUnit2 = QLabel("f_S", self)
layVlblfreq = QVBoxLayout()
layVlblfreq.addWidget(self.lblFreq1)
layVlblfreq.addWidget(self.lblFreq2)
layVledfreq = QVBoxLayout()
layVledfreq.addWidget(self.ledFreq1)
layVledfreq.addWidget(self.ledFreq2)
layVlblfreqU = QVBoxLayout()
layVlblfreqU.addWidget(self.lblFreqUnit1)
layVlblfreqU.addWidget(self.lblFreqUnit2)
#----------------------------------------------
self.lblNoise = QLabel(to_html("Noise: ", frmt='bi'), self)
self.cmbNoise = QComboBox(self)
self.cmbNoise.addItems(["None", "Gauss", "Uniform", "PRBS"])
self.cmbNoise.setToolTip("Type of additive noise.")
qset_cmb_box(self.cmbNoise, self.noise)
self.lblNoi = QLabel("not initialized", self)
self.ledNoi = QLineEdit(self)
self.ledNoi.setText(str(self.noi))
self.ledNoi.setToolTip("not initialized")
self.ledNoi.setObjectName("stimNoi")
layVlblNoi = QVBoxLayout()
layVlblNoi.addWidget(self.lblNoise)
layVlblNoi.addWidget(self.lblNoi)
layVcmbledNoi = QVBoxLayout()
layVcmbledNoi.addWidget(self.cmbNoise)
layVcmbledNoi.addWidget(self.ledNoi)
#----------------------------------------------
#layG_ctrl_stim = QGridLayout()
layH_ctrl_stim = QHBoxLayout()
layH_ctrl_stim.addWidget(lbl_title_stim)
layH_ctrl_stim.addStretch(1)
layH_ctrl_stim.addLayout(layVlblCmbDC)
layH_ctrl_stim.addLayout(layVCmbDC)
layH_ctrl_stim.addStretch(1)
layH_ctrl_stim.addLayout(layVlblAmp)
layH_ctrl_stim.addLayout(layVledAmp)
layH_ctrl_stim.addLayout(layVlblPhi)
layH_ctrl_stim.addLayout(layVledPhi)
layH_ctrl_stim.addLayout(layVlblPhU)
layH_ctrl_stim.addStretch(1)
layH_ctrl_stim.addLayout(layVlblfreq)
layH_ctrl_stim.addLayout(layVledfreq)
layH_ctrl_stim.addLayout(layVlblfreqU)
layH_ctrl_stim.addStretch(1)
layH_ctrl_stim.addLayout(layVlblNoi)
layH_ctrl_stim.addLayout(layVcmbledNoi)
layH_ctrl_stim.addStretch(10)
self.wdg_ctrl_stim = QWidget(self)
self.wdg_ctrl_stim.setLayout(layH_ctrl_stim)
# --------- end stimuli ---------------------------------
# frequency widgets require special handling as they are scaled with f_s
self.ledFreq1.installEventFilter(self)
self.ledFreq2.installEventFilter(self)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
# --- run control ---
self.led_N_start.editingFinished.connect(self.update_N)
self.led_N_points.editingFinished.connect(self.update_N)
# --- frequency control ---
# careful! currentIndexChanged passes the current index to _update_win_fft
self.cmb_win_fft.currentIndexChanged.connect(self._update_win_fft)
self.ledWinPar1.editingFinished.connect(self._read_param1)
self.ledWinPar2.editingFinished.connect(self._read_param2)
# --- stimulus control ---
self.chk_stim_options.clicked.connect(self._show_stim_options)
self.chk_stim_bl.clicked.connect(self._enable_stim_widgets)
self.cmbStimulus.currentIndexChanged.connect(self._enable_stim_widgets)
self.cmbNoise.currentIndexChanged.connect(self._update_noi)
self.ledNoi.editingFinished.connect(self._update_noi)
self.ledAmp1.editingFinished.connect(self._update_amp1)
self.ledAmp2.editingFinished.connect(self._update_amp2)
self.ledPhi1.editingFinished.connect(self._update_phi1)
self.ledPhi2.editingFinished.connect(self._update_phi2)
self.ledDC.editingFinished.connect(self._update_DC)
class PlotImpz_UI(QWidget):
"""
Create the UI for the PlotImpz class
"""
# incoming: not implemented at the moment, update_N is triggered directly
# by plot_impz
# sig_rx = pyqtSignal(object)
# outgoing: from various UI elements to PlotImpz ('ui_changed':'xxx')
sig_tx = pyqtSignal(object)
# outgoing: to fft related widgets (FFT window widget, qfft_win_select)
sig_tx_fft = pyqtSignal(object)
from pyfda.libs.pyfda_qt_lib import emit
# ------------------------------------------------------------------------------
def process_sig_rx(self, dict_sig=None):
"""
Process signals coming from
- FFT window widget
- qfft_win_select
"""
# logger.debug("PROCESS_SIG_RX - vis: {0}\n{1}"
# .format(self.isVisible(), pprint_log(dict_sig)))
if 'id' in dict_sig and dict_sig['id'] == id(self):
logger.warning("Stopped infinite loop:\n{0}".format(
pprint_log(dict_sig)))
return
# --- signals coming from the FFT window widget or the FFT window selector
if dict_sig['class'] in {'Plot_FFT_win', 'QFFTWinSelector'}:
if 'closeEvent' in dict_sig: # hide FFT window widget and return
self.hide_fft_wdg()
return
else:
# check for value 'fft_win*':
if 'view_changed' in dict_sig and 'fft_win' in dict_sig[
'view_changed']:
# local connection to FFT window widget and qfft_win_select
self.emit(dict_sig, sig_name='sig_tx_fft')
# global connection to e.g. plot_impz
self.emit(dict_sig)
# ------------------------------------------------------------------------------
def __init__(self):
super().__init__()
"""
Intitialize the widget, consisting of:
- top chkbox row
- coefficient table
- two bottom rows with action buttons
"""
# initial settings
self.N_start = 0
self.N_user = 0
self.N = 0
self.N_frame_user = 0
self.N_frame = 0
# time
self.plt_time_resp = "stem"
self.plt_time_stim = "line"
self.plt_time_stmq = "none"
self.plt_time_spgr = "none"
self.bottom_t = -80 # initial value for log. scale (time)
self.time_nfft_spgr = 256 # number of fft points per spectrogram segment
self.time_ovlp_spgr = 128 # number of overlap points between spectrogram segments
self.mode_spgr_time = "psd"
# frequency
self.cmb_freq_display_item = "mag"
self.plt_freq_resp = "line"
self.plt_freq_stim = "none"
self.plt_freq_stmq = "none"
self.bottom_f = -120 # initial value for log. scale
self.param = None
self.f_scale = fb.fil[0]['f_S']
self.t_scale = fb.fil[0]['T_S']
# list of windows that are available for FFT analysis
win_names_list = [
"Boxcar", "Rectangular", "Barthann", "Bartlett", "Blackman",
"Blackmanharris", "Bohman", "Cosine", "Dolph-Chebyshev", "Flattop",
"General Gaussian", "Gauss", "Hamming", "Hann", "Kaiser",
"Nuttall", "Parzen", "Slepian", "Triangular", "Tukey"
]
self.cur_win_name = "Rectangular" # set initial window type
# initialize windows dict with the list above
self.win_dict = get_windows_dict(win_names_list=win_names_list,
cur_win_name=self.cur_win_name)
# instantiate FFT window with default windows dict
self.fft_widget = Plot_FFT_win(self,
self.win_dict,
sym=False,
title="pyFDA Spectral Window Viewer")
# hide window initially, this is modeless i.e. a non-blocking popup window
self.fft_widget.hide()
# data / icon / tooltipp (none) for plotting styles
self.plot_styles_list = [
("Plot style"), ("none", QIcon(":/plot_style-none"), "off"),
("dots*", QIcon(":/plot_style-mkr"), "markers only"),
("line", QIcon(":/plot_style-line"), "line"),
("line*", QIcon(":/plot_style-line-mkr"), "line + markers"),
("stem", QIcon(":/plot_style-stem"), "stems"),
("stem*", QIcon(":/plot_style-stem-mkr"), "stems + markers"),
("steps", QIcon(":/plot_style-steps"), "steps"),
("steps*", QIcon(":/plot_style-steps-mkr"), "steps + markers")
]
self.cmb_time_spgr_items = [
"<span>Show Spectrogram for selected signal.</span>",
("none", "None", ""), ("xn", "x[n]", "input"),
("xqn", "x_q[n]", "quantized input"), ("yn", "y[n]", "output")
]
self.cmb_mode_spgr_time_items = [
"<span>Spectrogram display mode.</span>",
("psd", "PSD",
"<span>Power Spectral Density, either per bin or referred to "
"<i>f<sub>S</sub></i></span>"),
("magnitude", "Mag.", "Signal magnitude"),
("angle", "Angle", "Phase, wrapped to ± π"),
("phase", "Phase", "Phase (unwrapped)")
]
# self.N
self.cmb_freq_display_items = [
"<span>Select how to display the spectrum.</span>",
("mag", "Magnitude", "<span>Spectral magnitude</span>"),
("mag_phi", "Mag. / Phase", "<span>Magnitude and phase.</span>"),
("re_im", "Re. / Imag.",
"<span>Real and imaginary part of spectrum.</span>")
]
self._construct_UI()
# self._enable_stim_widgets()
self.update_N(emit=False) # also updates window function and win_dict
# self._update_noi()
def _construct_UI(self):
# ----------- ---------------------------------------------------
# Run control widgets
# ---------------------------------------------------------------
# self.but_auto_run = QPushButtonRT(text=to_html("Auto", frmt="b"), margin=0)
self.but_auto_run = QPushButton(" Auto", self)
self.but_auto_run.setObjectName("but_auto_run")
self.but_auto_run.setToolTip(
"<span>Update response automatically when "
"parameters have been changed.</span>")
# self.but_auto_run.setMaximumWidth(qtext_width(text=" Auto "))
self.but_auto_run.setCheckable(True)
self.but_auto_run.setChecked(True)
but_height = self.but_auto_run.sizeHint().height()
self.but_run = QPushButton(self)
self.but_run.setIcon(QIcon(":/play.svg"))
self.but_run.setIconSize(QSize(but_height, but_height))
self.but_run.setFixedSize(QSize(2 * but_height, but_height))
self.but_run.setToolTip("Run simulation")
self.but_run.setEnabled(True)
self.cmb_sim_select = QComboBox(self)
self.cmb_sim_select.addItems(["Float", "Fixpoint"])
qset_cmb_box(self.cmb_sim_select, "Float")
self.cmb_sim_select.setToolTip("<span>Simulate floating-point or "
"fixpoint response.</span>")
self.lbl_N_points = QLabel(to_html("N", frmt='bi') + " =", self)
self.led_N_points = QLineEdit(self)
self.led_N_points.setText(str(self.N))
self.led_N_points.setToolTip(
"<span>Last data point. "
"<i>N</i> = 0 tries to choose for you.</span>")
self.led_N_points.setMaximumWidth(qtext_width(N_x=8))
self.lbl_N_start = QLabel(to_html("N_0", frmt='bi') + " =", self)
self.led_N_start = QLineEdit(self)
self.led_N_start.setText(str(self.N_start))
self.led_N_start.setToolTip("<span>First point to plot.</span>")
self.led_N_start.setMaximumWidth(qtext_width(N_x=8))
self.lbl_N_frame = QLabel(to_html("ΔN", frmt='bi') + " =", self)
self.led_N_frame = QLineEdit(self)
self.led_N_frame.setText(str(self.N_frame))
self.led_N_frame.setToolTip(
"<span>Frame length; longer frames calculate faster but calculation cannot "
"be stopped so quickly. "
"<i>ΔN</i> = 0 calculates all samples in one frame.</span>")
self.led_N_frame.setMaximumWidth(qtext_width(N_x=8))
self.prg_wdg = QProgressBar(self)
self.prg_wdg.setFixedHeight(but_height)
self.prg_wdg.setFixedWidth(qtext_width(N_x=6))
self.prg_wdg.setMinimum(0)
self.prg_wdg.setValue(0)
self.but_toggle_stim_options = PushButton(" Stimuli ", checked=True)
self.but_toggle_stim_options.setObjectName("but_stim_options")
self.but_toggle_stim_options.setToolTip(
"<span>Show / hide stimulus options.</span>")
self.lbl_stim_cmplx_warn = QLabel(self)
self.lbl_stim_cmplx_warn = QLabel(to_html("Cmplx!", frmt='b'), self)
self.lbl_stim_cmplx_warn.setToolTip(
'<span>Signal is complex valued; '
'single-sided and H<sub>id</sub> spectra may be wrong.</span>')
self.lbl_stim_cmplx_warn.setStyleSheet("background-color : yellow;"
"border : 1px solid grey")
self.but_fft_wdg = QPushButton(self)
self.but_fft_wdg.setIcon(QIcon(":/fft.svg"))
self.but_fft_wdg.setIconSize(QSize(but_height, but_height))
self.but_fft_wdg.setFixedSize(QSize(int(1.5 * but_height), but_height))
self.but_fft_wdg.setToolTip(
'<span>Show / hide FFT widget (select window type '
' and display its properties).</span>')
self.but_fft_wdg.setCheckable(True)
self.but_fft_wdg.setChecked(False)
self.qfft_win_select = QFFTWinSelector(self, self.win_dict)
self.but_fx_scale = PushButton(" FX:Int ")
self.but_fx_scale.setObjectName("but_fx_scale")
self.but_fx_scale.setToolTip(
"<span>Display data with integer (fixpoint) scale.</span>")
self.but_fx_range = PushButton(" FX:Range")
self.but_fx_range.setObjectName("but_fx_limits")
self.but_fx_range.setToolTip(
"<span>Display limits of fixpoint range.</span>")
layH_ctrl_run = QHBoxLayout()
layH_ctrl_run.addWidget(self.but_auto_run)
layH_ctrl_run.addWidget(self.but_run)
layH_ctrl_run.addWidget(self.cmb_sim_select)
layH_ctrl_run.addSpacing(10)
layH_ctrl_run.addWidget(self.lbl_N_start)
layH_ctrl_run.addWidget(self.led_N_start)
layH_ctrl_run.addWidget(self.lbl_N_points)
layH_ctrl_run.addWidget(self.led_N_points)
layH_ctrl_run.addWidget(self.lbl_N_frame)
layH_ctrl_run.addWidget(self.led_N_frame)
layH_ctrl_run.addWidget(self.prg_wdg)
layH_ctrl_run.addSpacing(20)
layH_ctrl_run.addWidget(self.but_toggle_stim_options)
layH_ctrl_run.addSpacing(5)
layH_ctrl_run.addWidget(self.lbl_stim_cmplx_warn)
layH_ctrl_run.addSpacing(20)
layH_ctrl_run.addWidget(self.but_fft_wdg)
layH_ctrl_run.addWidget(self.qfft_win_select)
layH_ctrl_run.addSpacing(20)
layH_ctrl_run.addWidget(self.but_fx_scale)
layH_ctrl_run.addWidget(self.but_fx_range)
layH_ctrl_run.addStretch(10)
# layH_ctrl_run.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_run = QWidget(self)
self.wdg_ctrl_run.setLayout(layH_ctrl_run)
# --- end of run control ----------------------------------------
# ----------- ---------------------------------------------------
# Controls for time domain
# ---------------------------------------------------------------
self.lbl_plt_time_stim = QLabel(to_html("Stim. x", frmt='bi'), self)
self.cmb_plt_time_stim = QComboBox(self)
qcmb_box_populate(self.cmb_plt_time_stim, self.plot_styles_list,
self.plt_time_stim)
self.cmb_plt_time_stim.setToolTip(
"<span>Plot style for stimulus.</span>")
self.lbl_plt_time_stmq = QLabel(
to_html(" Fixp. Stim. x_Q", frmt='bi'), self)
self.cmb_plt_time_stmq = QComboBox(self)
qcmb_box_populate(self.cmb_plt_time_stmq, self.plot_styles_list,
self.plt_time_stmq)
self.cmb_plt_time_stmq.setToolTip(
"<span>Plot style for <em>fixpoint</em> "
"(quantized) stimulus.</span>")
lbl_plt_time_resp = QLabel(to_html(" Resp. y", frmt='bi'),
self)
self.cmb_plt_time_resp = QComboBox(self)
qcmb_box_populate(self.cmb_plt_time_resp, self.plot_styles_list,
self.plt_time_resp)
self.cmb_plt_time_resp.setToolTip(
"<span>Plot style for response.</span>")
self.lbl_win_time = QLabel(to_html(" Win", frmt='bi'), self)
self.chk_win_time = QCheckBox(self)
self.chk_win_time.setObjectName("chk_win_time")
self.chk_win_time.setToolTip(
'<span>Plot FFT windowing function.</span>')
self.chk_win_time.setChecked(False)
line1 = QVLine()
line2 = QVLine(width=5)
self.but_log_time = PushButton(" dB")
self.but_log_time.setObjectName("but_log_time")
self.but_log_time.setToolTip(
"<span>Logarithmic scale for y-axis.</span>")
lbl_plt_time_spgr = QLabel(to_html("Spectrogram", frmt='bi'), self)
self.cmb_plt_time_spgr = QComboBox(self)
qcmb_box_populate(self.cmb_plt_time_spgr, self.cmb_time_spgr_items,
self.plt_time_spgr)
spgr_en = self.plt_time_spgr != "none"
self.cmb_mode_spgr_time = QComboBox(self)
qcmb_box_populate(self.cmb_mode_spgr_time,
self.cmb_mode_spgr_time_items, self.mode_spgr_time)
self.cmb_mode_spgr_time.setVisible(spgr_en)
self.lbl_byfs_spgr_time = QLabel(to_html(" per f_S", frmt='b'),
self)
self.lbl_byfs_spgr_time.setVisible(spgr_en)
self.chk_byfs_spgr_time = QCheckBox(self)
self.chk_byfs_spgr_time.setObjectName("chk_log_spgr")
self.chk_byfs_spgr_time.setToolTip("<span>Display spectral density "
"i.e. scale by f_S</span>")
self.chk_byfs_spgr_time.setChecked(True)
self.chk_byfs_spgr_time.setVisible(spgr_en)
self.but_log_spgr_time = QPushButton("dB")
self.but_log_spgr_time.setMaximumWidth(qtext_width(text=" dB"))
self.but_log_spgr_time.setObjectName("but_log_spgr")
self.but_log_spgr_time.setToolTip(
"<span>Logarithmic scale for spectrogram.</span>")
self.but_log_spgr_time.setCheckable(True)
self.but_log_spgr_time.setChecked(True)
self.but_log_spgr_time.setVisible(spgr_en)
self.lbl_time_nfft_spgr = QLabel(to_html(" N_FFT =", frmt='bi'),
self)
self.lbl_time_nfft_spgr.setVisible(spgr_en)
self.led_time_nfft_spgr = QLineEdit(self)
self.led_time_nfft_spgr.setText(str(self.time_nfft_spgr))
self.led_time_nfft_spgr.setToolTip("<span>Number of FFT points per "
"spectrogram segment.</span>")
self.led_time_nfft_spgr.setVisible(spgr_en)
self.lbl_time_ovlp_spgr = QLabel(to_html(" N_OVLP =", frmt='bi'),
self)
self.lbl_time_ovlp_spgr.setVisible(spgr_en)
self.led_time_ovlp_spgr = QLineEdit(self)
self.led_time_ovlp_spgr.setText(str(self.time_ovlp_spgr))
self.led_time_ovlp_spgr.setToolTip(
"<span>Number of overlap data points "
"between spectrogram segments.</span>")
self.led_time_ovlp_spgr.setVisible(spgr_en)
self.lbl_log_bottom_time = QLabel(to_html("min =", frmt='bi'), self)
self.led_log_bottom_time = QLineEdit(self)
self.led_log_bottom_time.setText(str(self.bottom_t))
self.led_log_bottom_time.setMaximumWidth(qtext_width(N_x=8))
self.led_log_bottom_time.setToolTip(
"<span>Minimum display value for time and spectrogram plots with log. scale."
"</span>")
self.lbl_log_bottom_time.setVisible(
self.but_log_time.isChecked()
or (spgr_en and self.but_log_spgr_time.isChecked()))
self.led_log_bottom_time.setVisible(
self.lbl_log_bottom_time.isVisible())
# self.lbl_colorbar_time = QLabel(to_html(" Col.bar", frmt='b'), self)
# self.lbl_colorbar_time.setVisible(spgr_en)
# self.chk_colorbar_time = QCheckBox(self)
# self.chk_colorbar_time.setObjectName("chk_colorbar_time")
# self.chk_colorbar_time.setToolTip("<span>Enable colorbar</span>")
# self.chk_colorbar_time.setChecked(True)
# self.chk_colorbar_time.setVisible(spgr_en)
layH_ctrl_time = QHBoxLayout()
layH_ctrl_time.addWidget(self.lbl_plt_time_stim)
layH_ctrl_time.addWidget(self.cmb_plt_time_stim)
#
layH_ctrl_time.addWidget(self.lbl_plt_time_stmq)
layH_ctrl_time.addWidget(self.cmb_plt_time_stmq)
#
layH_ctrl_time.addWidget(lbl_plt_time_resp)
layH_ctrl_time.addWidget(self.cmb_plt_time_resp)
#
layH_ctrl_time.addWidget(self.lbl_win_time)
layH_ctrl_time.addWidget(self.chk_win_time)
layH_ctrl_time.addSpacing(5)
layH_ctrl_time.addWidget(line1)
layH_ctrl_time.addSpacing(5)
#
layH_ctrl_time.addWidget(self.lbl_log_bottom_time)
layH_ctrl_time.addWidget(self.led_log_bottom_time)
layH_ctrl_time.addWidget(self.but_log_time)
layH_ctrl_time.addSpacing(5)
layH_ctrl_time.addWidget(line2)
layH_ctrl_time.addSpacing(5)
#
layH_ctrl_time.addWidget(lbl_plt_time_spgr)
layH_ctrl_time.addWidget(self.cmb_plt_time_spgr)
layH_ctrl_time.addWidget(self.cmb_mode_spgr_time)
layH_ctrl_time.addWidget(self.lbl_byfs_spgr_time)
layH_ctrl_time.addWidget(self.chk_byfs_spgr_time)
layH_ctrl_time.addWidget(self.but_log_spgr_time)
layH_ctrl_time.addWidget(self.lbl_time_nfft_spgr)
layH_ctrl_time.addWidget(self.led_time_nfft_spgr)
layH_ctrl_time.addWidget(self.lbl_time_ovlp_spgr)
layH_ctrl_time.addWidget(self.led_time_ovlp_spgr)
layH_ctrl_time.addStretch(10)
# layH_ctrl_time.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_time = QWidget(self)
self.wdg_ctrl_time.setLayout(layH_ctrl_time)
# ---- end time domain ------------------
# ---------------------------------------------------------------
# Controls for frequency domain
# ---------------------------------------------------------------
self.lbl_plt_freq_stim = QLabel(to_html("Stimulus X", frmt='bi'), self)
self.cmb_plt_freq_stim = QComboBox(self)
qcmb_box_populate(self.cmb_plt_freq_stim, self.plot_styles_list,
self.plt_freq_stim)
self.cmb_plt_freq_stim.setToolTip(
"<span>Plot style for stimulus.</span>")
self.lbl_plt_freq_stmq = QLabel(
to_html(" Fixp. Stim. X_Q", frmt='bi'), self)
self.cmb_plt_freq_stmq = QComboBox(self)
qcmb_box_populate(self.cmb_plt_freq_stmq, self.plot_styles_list,
self.plt_freq_stmq)
self.cmb_plt_freq_stmq.setToolTip(
"<span>Plot style for <em>fixpoint</em> (quantized) stimulus.</span>"
)
lbl_plt_freq_resp = QLabel(to_html(" Response Y", frmt='bi'),
self)
self.cmb_plt_freq_resp = QComboBox(self)
qcmb_box_populate(self.cmb_plt_freq_resp, self.plot_styles_list,
self.plt_freq_resp)
self.cmb_plt_freq_resp.setToolTip(
"<span>Plot style for response.</span>")
self.but_log_freq = QPushButton("dB")
self.but_log_freq.setMaximumWidth(qtext_width(" dB"))
self.but_log_freq.setObjectName(".but_log_freq")
self.but_log_freq.setToolTip(
"<span>Logarithmic scale for y-axis.</span>")
self.but_log_freq.setCheckable(True)
self.but_log_freq.setChecked(True)
self.lbl_log_bottom_freq = QLabel(to_html("min =", frmt='bi'), self)
self.lbl_log_bottom_freq.setVisible(self.but_log_freq.isChecked())
self.led_log_bottom_freq = QLineEdit(self)
self.led_log_bottom_freq.setText(str(self.bottom_f))
self.led_log_bottom_freq.setMaximumWidth(qtext_width(N_x=8))
self.led_log_bottom_freq.setToolTip(
"<span>Minimum display value for log. scale.</span>")
self.led_log_bottom_freq.setVisible(self.but_log_freq.isChecked())
if not self.but_log_freq.isChecked():
self.bottom_f = 0
self.cmb_freq_display = QComboBox(self)
qcmb_box_populate(self.cmb_freq_display, self.cmb_freq_display_items,
self.cmb_freq_display_item)
self.cmb_freq_display.setObjectName("cmb_re_im_freq")
self.but_Hf = QPushButtonRT(self, to_html("H_id", frmt="bi"), margin=5)
self.but_Hf.setObjectName("chk_Hf")
self.but_Hf.setToolTip(
"<span>Show ideal frequency response, calculated "
"from the filter coefficients.</span>")
self.but_Hf.setChecked(False)
self.but_Hf.setCheckable(True)
self.but_freq_norm_impz = QPushButtonRT(
text="<b><i>E<sub>X</sub></i> = 1</b>", margin=5)
self.but_freq_norm_impz.setToolTip(
"<span>Normalize the FFT of the stimulus with <i>N<sub>FFT</sub></i> for "
"<i>E<sub>X</sub></i> = 1. For a dirac pulse, this yields "
"|<i>Y(f)</i>| = |<i>H(f)</i>|. DC and Noise need to be "
"turned off, window should be <b>Rectangular</b>.</span>")
self.but_freq_norm_impz.setCheckable(True)
self.but_freq_norm_impz.setChecked(True)
self.but_freq_norm_impz.setObjectName("freq_norm_impz")
self.but_freq_show_info = QPushButton("Info", self)
self.but_freq_show_info.setMaximumWidth(qtext_width(" Info "))
self.but_freq_show_info.setObjectName("but_show_info_freq")
self.but_freq_show_info.setToolTip(
"<span>Show signal power in legend.</span>")
self.but_freq_show_info.setCheckable(True)
self.but_freq_show_info.setChecked(False)
layH_ctrl_freq = QHBoxLayout()
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stim)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stim)
#
layH_ctrl_freq.addWidget(self.lbl_plt_freq_stmq)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_stmq)
#
layH_ctrl_freq.addWidget(lbl_plt_freq_resp)
layH_ctrl_freq.addWidget(self.cmb_plt_freq_resp)
#
layH_ctrl_freq.addSpacing(5)
layH_ctrl_freq.addWidget(self.but_Hf)
layH_ctrl_freq.addStretch(1)
#
layH_ctrl_freq.addWidget(self.lbl_log_bottom_freq)
layH_ctrl_freq.addWidget(self.led_log_bottom_freq)
layH_ctrl_freq.addWidget(self.but_log_freq)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.cmb_freq_display)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.but_freq_norm_impz)
layH_ctrl_freq.addStretch(1)
layH_ctrl_freq.addWidget(self.but_freq_show_info)
layH_ctrl_freq.addStretch(10)
# layH_ctrl_freq.setContentsMargins(*params['wdg_margins'])
self.wdg_ctrl_freq = QWidget(self)
self.wdg_ctrl_freq.setLayout(layH_ctrl_freq)
# ---- end Frequency Domain ------------------
# ----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
# ----------------------------------------------------------------------
# connect FFT widget to qfft_selector and vice versa and to and signals upstream:
self.fft_widget.sig_tx.connect(self.process_sig_rx)
self.qfft_win_select.sig_tx.connect(self.process_sig_rx)
# connect process_sig_rx output to both FFT widgets
self.sig_tx_fft.connect(self.fft_widget.sig_rx)
self.sig_tx_fft.connect(self.qfft_win_select.sig_rx)
# ----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
# ----------------------------------------------------------------------
# --- run control ---
self.led_N_start.editingFinished.connect(self.update_N)
self.led_N_points.editingFinished.connect(self.update_N)
self.led_N_frame.editingFinished.connect(self.update_N)
self.but_fft_wdg.clicked.connect(self.toggle_fft_wdg)
# -------------------------------------------------------------------------
def update_N(self, emit=True):
"""
Update values for `self.N` and `self.win_dict['N']`, for `self.N_start` and
`self.N_end` from the corresponding QLineEditWidgets.
When `emit==True`, fire `'ui_changed': 'N'` to update the FFT window and the
`plot_impz` widgets. In contrast to `view_changed`, this also forces a
recalculation of the transient response.
This method is called by:
- `self._construct_ui()` with `emit==False`
- `plot_impz()` with `emit==False` when the automatic calculation
of N has to be updated (e.g. order of FIR Filter has changed
- signal-slot connection when `N_start` or `N_end` QLineEdit widgets have
been changed (`emit==True`)
"""
if not isinstance(emit, bool):
logger.error("update N: emit={0}".format(emit))
self.N_start = safe_eval(self.led_N_start.text(),
self.N_start,
return_type='int',
sign='poszero')
self.led_N_start.setText(str(self.N_start)) # update widget
self.N_user = safe_eval(self.led_N_points.text(),
self.N_user,
return_type='int',
sign='poszero')
if self.N_user == 0: # automatic calculation
self.N = self.calc_n_points(self.N_user) # widget remains set to 0
self.led_N_points.setText("0") # update widget
else:
self.N = self.N_user
self.led_N_points.setText(str(self.N)) # update widget
# total number of points to be calculated: N + N_start
self.N_end = self.N + self.N_start
self.N_frame_user = safe_eval(self.led_N_frame.text(),
self.N_frame_user,
return_type='int',
sign='poszero')
if self.N_frame_user == 0:
self.N_frame = self.N_end # use N_end for frame length
self.led_N_frame.setText(
"0") # update widget with "0" as set by user
else:
self.N_frame = self.N_frame_user
self.led_N_frame.setText(str(self.N_frame)) # update widget
# recalculate displayed freq. index values when freq. unit == 'k'
if fb.fil[0]['freq_specs_unit'] == 'k':
self.update_freqs()
if emit:
# use `'ui_changed'` as this triggers recalculation of the transient
# response
self.emit({'ui_changed': 'N'})
# ------------------------------------------------------------------------------
def toggle_fft_wdg(self):
"""
Show / hide FFT widget depending on the state of the corresponding button
When widget is shown, trigger an update of the window function.
"""
if self.but_fft_wdg.isChecked():
self.fft_widget.show()
self.emit({'view_changed': 'fft_win_type'}, sig_name='sig_tx_fft')
else:
self.fft_widget.hide()
# --------------------------------------------------------------------------
def hide_fft_wdg(self):
"""
The closeEvent caused by clicking the "x" in the FFT widget is caught
there and routed here to only hide the window
"""
self.but_fft_wdg.setChecked(False)
self.fft_widget.hide()
# ------------------------------------------------------------------------------
def calc_n_points(self, N_user=0):
"""
Calculate number of points to be displayed, depending on type of filter
(FIR, IIR) and user input. If the user selects 0 points, the number is
calculated automatically.
An improvement would be to calculate the dominant pole and the corresponding
settling time.
"""
if N_user == 0: # set number of data points automatically
if fb.fil[0]['ft'] == 'IIR':
# IIR: No algorithm yet, set N = 100
N = 100
else:
# FIR: N = number of coefficients (max. 100)
N = min(len(fb.fil[0]['ba'][0]), 100)
else:
N = N_user
return N
class Plot_Hf(QWidget):
"""
Widget for plotting \|H(f)\|, frequency specs and the phase
"""
# incoming, connected in sender widget (locally connected to self.process_sig_rx() )
sig_rx = pyqtSignal(object)
def __init__(self, parent):
super(Plot_Hf, self).__init__(parent)
self.needs_calc = True # flag whether plot needs to be updated
self.needs_draw = True # flag whether plot needs to be redrawn
self.tool_tip = "Magnitude and phase frequency response"
self.tab_label = "|H(f)|"
self.log_bottom = -80
self.lin_neg_bottom = -10
self._construct_ui()
#------------------------------------------------------------------------------
def process_sig_rx(self, dict_sig=None):
"""
Process signals coming from the navigation toolbar and from sig_rx
"""
logger.debug("SIG_RX - needs_calc = {0}, vis = {1}\n{2}"\
.format(self.needs_calc, self.isVisible(), pprint_log(dict_sig)))
if self.isVisible():
if 'data_changed' in dict_sig or 'specs_changed' in dict_sig\
or 'home' in dict_sig or self.needs_calc:
self.draw()
self.needs_calc = False
self.needs_draw = False
if 'view_changed' in dict_sig or self.needs_draw:
self.update_view()
self.needs_draw = False
else:
if 'data_changed' in dict_sig or 'specs_changed' in dict_sig:
self.needs_calc = True
if 'view_changed' in dict_sig:
self.needs_draw = True
def _construct_ui(self):
"""
Define and construct the subwidgets
"""
modes = ['| H |', 're{H}', 'im{H}']
self.cmbShowH = QComboBox(self)
self.cmbShowH.addItems(modes)
self.cmbShowH.setObjectName("cmbUnitsH")
self.cmbShowH.setToolTip(
"Show magnitude, real / imag. part of H or H \n"
"without linear phase (acausal system).")
self.cmbShowH.setCurrentIndex(0)
self.lblIn = QLabel("in", self)
units = ['dB', 'V', 'W', 'Auto']
self.cmbUnitsA = QComboBox(self)
self.cmbUnitsA.addItems(units)
self.cmbUnitsA.setObjectName("cmbUnitsA")
self.cmbUnitsA.setToolTip(
"<span>Set unit for y-axis:\n"
"dB is attenuation (positive values), V and W are gain (less than 1).</span>"
)
self.cmbUnitsA.setCurrentIndex(0)
self.lbl_log_bottom = QLabel("Bottom", self)
self.led_log_bottom = QLineEdit(self)
self.led_log_bottom.setText(str(self.log_bottom))
self.led_log_bottom.setToolTip(
"<span>Minimum display value for dB. scale.</span>")
self.lbl_log_unit = QLabel("dB", self)
self.cmbShowH.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.cmbUnitsA.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.chkZerophase = QCheckBox("Zero phase", self)
self.chkZerophase.setToolTip(
"<span>Remove linear phase calculated from filter order.\n"
"Attention: This makes no sense for a non-linear phase system!</span>"
)
self.lblInset = QLabel("Inset", self)
self.cmbInset = QComboBox(self)
self.cmbInset.addItems(['off', 'edit', 'fixed'])
self.cmbInset.setObjectName("cmbInset")
self.cmbInset.setToolTip("Display/edit second inset plot")
self.cmbInset.setCurrentIndex(0)
self.inset_idx = 0 # store previous index for comparison
self.chkSpecs = QCheckBox("Specs", self)
self.chkSpecs.setChecked(False)
self.chkSpecs.setToolTip("Display filter specs as hatched regions")
self.chkPhase = QCheckBox("Phase", self)
self.chkPhase.setToolTip("Overlay phase")
self.chkPhase.setChecked(False)
self.chkAlign = QCheckBox("Align", self)
self.chkAlign.setToolTip(
"<span>Try to align grids for magnitude and phase "
"(doesn't work in all cases).</span>")
self.chkAlign.setChecked(True)
self.chkAlign.setVisible(self.chkPhase.isChecked())
#----------------------------------------------------------------------
# ### frmControls ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
layHControls = QHBoxLayout()
layHControls.addStretch(10)
layHControls.addWidget(self.cmbShowH)
layHControls.addWidget(self.lblIn)
layHControls.addWidget(self.cmbUnitsA)
layHControls.addStretch(1)
layHControls.addWidget(self.lbl_log_bottom)
layHControls.addWidget(self.led_log_bottom)
layHControls.addWidget(self.lbl_log_unit)
layHControls.addStretch(1)
layHControls.addWidget(self.chkZerophase)
layHControls.addStretch(1)
layHControls.addWidget(self.lblInset)
layHControls.addWidget(self.cmbInset)
layHControls.addStretch(1)
layHControls.addWidget(self.chkSpecs)
layHControls.addStretch(1)
layHControls.addWidget(self.chkPhase)
layHControls.addWidget(self.chkAlign)
layHControls.addStretch(10)
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
#----------------------------------------------------------------------
# ### mplwidget ###
#
# main widget, encompassing the other widgets
#----------------------------------------------------------------------
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.mplwidget.mplToolbar.a_he.setEnabled(True)
self.mplwidget.mplToolbar.a_he.info = "manual/plot_hf.html"
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # calculate and draw |H(f)|
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.cmbUnitsA.currentIndexChanged.connect(self.draw)
self.led_log_bottom.editingFinished.connect(self.update_view)
self.cmbShowH.currentIndexChanged.connect(self.draw)
self.chkZerophase.clicked.connect(self.draw)
self.cmbInset.currentIndexChanged.connect(self.draw_inset)
self.chkSpecs.clicked.connect(self.draw)
self.chkPhase.clicked.connect(self.draw)
self.chkAlign.clicked.connect(self.draw)
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
#------------------------------------------------------------------------------
def init_axes(self):
"""
Initialize and clear the axes (this is run only once)
"""
if len(self.mplwidget.fig.get_axes()) == 0: # empty figure, no axes
self.ax = self.mplwidget.fig.subplots()
self.ax.xaxis.tick_bottom() # remove axis ticks on top
self.ax.yaxis.tick_left() # remove axis ticks right
#------------------------------------------------------------------------------
def align_y_axes(self, ax1, ax2):
""" Sets tick marks of twinx axes to line up with total number of
ax1 tick marks
"""
ax1_ylims = ax1.get_ybound()
# collect only visible ticks
ax1_yticks = [
t for t in ax1.get_yticks()
if t >= ax1_ylims[0] and t <= ax1_ylims[1]
]
ax1_nticks = len(ax1_yticks)
ax1_ydelta_lim = ax1_ylims[1] - ax1_ylims[0] # span of limits
ax1_ydelta_vis = ax1_yticks[-1] - ax1_yticks[
0] # delta of max. and min tick
ax1_yoffset = ax1_yticks[0] - ax1_ylims[
0] # offset between lower limit and first tick
# calculate scale of Delta Limits / Delta Ticks
ax1_scale = ax1_ydelta_lim / ax1_ydelta_vis
ax2_ylims = ax2.get_ybound()
ax2_yticks = ax2.get_yticks()
ax2_nticks = len(ax2_yticks)
#ax2_ydelta_lim = ax2_ylims[1] - ax2_ylims[0]
ax2_ydelta_vis = ax2_yticks[-1] - ax2_yticks[0]
ax2_ydelta_lim = ax2_ydelta_vis * ax1_scale
ax2_scale = ax2_ydelta_lim / ax2_ydelta_vis
# calculate new offset between lower limit and first tick
ax2_yoffset = ax1_yoffset * ax2_ydelta_lim / ax1_ydelta_lim
logger.warning("ax2: delta_vis: {0}, scale: {1}, offset: {2}".format(
ax2_ydelta_vis, ax2_scale, ax2_yoffset))
logger.warning("Ticks: {0} # {1}".format(ax1_nticks, ax2_nticks))
ax2.set_yticks(
np.linspace(ax2_yticks[0], (ax2_yticks[1] - ax2_yticks[0]),
ax1_nticks))
logger.warning("ax2[0]={0} | ax2[1]={1} ax2[-1]={2}".format(
ax2_yticks[0], ax2_yticks[1], ax2_yticks[-1]))
ax2_lim0 = ax2_yticks[0] - ax2_yoffset
ax2.set_ybound(ax2_lim0, ax2_lim0 + ax2_ydelta_lim)
# =============================================================================
# # https://stackoverflow.com/questions/26752464/how-do-i-align-gridlines-for-two-y-axis-scales-using-matplotlib
# # works, but both axes have ugly numbers
# nticks = 11
# ax.yaxis.set_major_locator(ticker.LinearLocator(nticks))
# self.ax_p.yaxis.set_major_locator(ticker.LinearLocator(nticks))
# # =============================================================================
# =============================================================================
# # https://stackoverflow.com/questions/45037386/trouble-aligning-ticks-for-matplotlib-twinx-axes
# # works, but second axis has ugly numbering
# l_H = ax.get_ylim()
# l_p = self.ax_p.get_ylim()
# f = lambda x : l_p[0]+(x-l_H[0])/(l_H[1]-l_H[0])*(l_p[1]-l_p[0])
# ticks = f(ax.get_yticks())
# self.ax_p.yaxis.set_major_locator(ticker.FixedLocator(ticks))
#
# =============================================================================
# http://stackoverflow.com/questions/28692608/align-grid-lines-on-two-plots
# http://stackoverflow.com/questions/3654619/matplotlib-multiple-y-axes-grid-lines-applied-to-both
# http://stackoverflow.com/questions/20243683/matplotlib-align-twinx-tick-marks
# manual setting:
#self.ax_p.set_yticks( np.linspace(self.ax_p.get_ylim()[0],self.ax_p.get_ylim()[1],nbins) )
#ax1.set_yticks(np.linspace(ax1.get_ybound()[0], ax1.get_ybound()[1], 5))
#ax2.set_yticks(np.linspace(ax2.get_ybound()[0], ax2.get_ybound()[1], 5))
#http://stackoverflow.com/questions/3654619/matplotlib-multiple-y-axes-grid-lines-applied-to-both
# use helper functions from matplotlib.ticker:
# MaxNLocator: set no more than nbins + 1 ticks
#self.ax_p.yaxis.set_major_locator( matplotlib.ticker.MaxNLocator(nbins = nbins) )
# further options: integer = False,
# prune = [‘lower’ | ‘upper’ | ‘both’ | None] Remove edge ticks
# AutoLocator:
#self.ax_p.yaxis.set_major_locator( matplotlib.ticker.AutoLocator() )
# LinearLocator:
#self.ax_p.yaxis.set_major_locator( matplotlib.ticker.LinearLocator(numticks = nbins -1 ) )
# self.ax_p.locator_params(axis = 'y', nbins = nbins)
#
# self.ax_p.set_yticks(np.linspace(self.ax_p.get_ybound()[0],
# self.ax_p.get_ybound()[1],
# len(self.ax.get_yticks())-1))
#N = source_ax.xaxis.get_major_ticks()
#target_ax.xaxis.set_major_locator(LinearLocator(N))
#------------------------------------------------------------------------------
def plot_spec_limits(self, ax):
"""
Plot the specifications limits (F_SB, A_SB, ...) as hatched areas with borders.
"""
hatch = params['mpl_hatch']
hatch_borders = params['mpl_hatch_border']
def dB(lin):
return 20 * np.log10(lin)
def _plot_specs():
# upper limits:
ax.plot(F_lim_upl, A_lim_upl, F_lim_upc, A_lim_upc, F_lim_upr,
A_lim_upr, **hatch_borders)
if A_lim_upl:
ax.fill_between(F_lim_upl, max(A_lim_upl), A_lim_upl, **hatch)
if A_lim_upc:
ax.fill_between(F_lim_upc, max(A_lim_upc), A_lim_upc, **hatch)
if A_lim_upr:
ax.fill_between(F_lim_upr, max(A_lim_upr), A_lim_upr, **hatch)
# lower limits:
ax.plot(F_lim_lol, A_lim_lol, F_lim_loc, A_lim_loc, F_lim_lor,
A_lim_lor, **hatch_borders)
if A_lim_lol:
ax.fill_between(F_lim_lol, min(A_lim_lol), A_lim_lol, **hatch)
if A_lim_loc:
ax.fill_between(F_lim_loc, min(A_lim_loc), A_lim_loc, **hatch)
if A_lim_lor:
ax.fill_between(F_lim_lor, min(A_lim_lor), A_lim_lor, **hatch)
if self.unitA == 'V':
exp = 1.
elif self.unitA == 'W':
exp = 2.
if self.unitA == 'dB':
if fb.fil[0]['ft'] == "FIR":
A_PB_max = dB(1 + self.A_PB)
A_PB2_max = dB(1 + self.A_PB2)
else: # IIR dB
A_PB_max = A_PB2_max = 0
A_PB_min = dB(1 - self.A_PB)
A_PB2_min = dB(1 - self.A_PB2)
A_PB_minx = min(A_PB_min, A_PB2_min) - 5
A_PB_maxx = max(A_PB_max, A_PB2_max) + 5
A_SB = dB(self.A_SB)
A_SB2 = dB(self.A_SB2)
A_SB_maxx = max(A_SB, A_SB2) + 10
else: # 'V' or 'W'
if fb.fil[0]['ft'] == "FIR":
A_PB_max = (1 + self.A_PB)**exp
A_PB2_max = (1 + self.A_PB2)**exp
else: # IIR lin
A_PB_max = A_PB2_max = 1
A_PB_min = (1 - self.A_PB)**exp
A_PB2_min = (1 - self.A_PB2)**exp
A_PB_minx = min(A_PB_min, A_PB2_min) / 1.05
A_PB_maxx = max(A_PB_max, A_PB2_max) * 1.05
A_SB = self.A_SB**exp
A_SB2 = self.A_SB2**exp
A_SB_maxx = A_PB_min / 10.
F_max = self.f_max / 2
F_PB = self.F_PB
F_SB = fb.fil[0]['F_SB'] * self.f_max
F_SB2 = fb.fil[0]['F_SB2'] * self.f_max
F_PB2 = fb.fil[0]['F_PB2'] * self.f_max
F_lim_upl = F_lim_lol = [] # left side limits, lower and upper
A_lim_upl = A_lim_lol = []
F_lim_upc = F_lim_loc = [] # center limits, lower and upper
A_lim_upc = A_lim_loc = []
F_lim_upr = F_lim_lor = [] # right side limits, lower and upper
A_lim_upr = A_lim_lor = []
if fb.fil[0]['rt'] == 'LP':
F_lim_upl = [0, F_PB, F_PB]
A_lim_upl = [A_PB_max, A_PB_max, A_PB_maxx]
F_lim_lol = F_lim_upl
A_lim_lol = [A_PB_min, A_PB_min, A_PB_minx]
F_lim_upr = [F_SB, F_SB, F_max]
A_lim_upr = [A_SB_maxx, A_SB, A_SB]
if fb.fil[0]['rt'] == 'HP':
F_lim_upl = [0, F_SB, F_SB]
A_lim_upl = [A_SB, A_SB, A_SB_maxx]
F_lim_upr = [F_PB, F_PB, F_max]
A_lim_upr = [A_PB_maxx, A_PB_max, A_PB_max]
F_lim_lor = F_lim_upr
A_lim_lor = [A_PB_minx, A_PB_min, A_PB_min]
if fb.fil[0]['rt'] == 'BS':
F_lim_upl = [0, F_PB, F_PB]
A_lim_upl = [A_PB_max, A_PB_max, A_PB_maxx]
F_lim_lol = F_lim_upl
A_lim_lol = [A_PB_min, A_PB_min, A_PB_minx]
F_lim_upc = [F_SB, F_SB, F_SB2, F_SB2]
A_lim_upc = [A_SB_maxx, A_SB, A_SB, A_SB_maxx]
F_lim_upr = [F_PB2, F_PB2, F_max]
A_lim_upr = [A_PB_maxx, A_PB2_max, A_PB2_max]
F_lim_lor = F_lim_upr
A_lim_lor = [A_PB_minx, A_PB2_min, A_PB2_min]
if fb.fil[0]['rt'] == 'BP':
F_lim_upl = [0, F_SB, F_SB]
A_lim_upl = [A_SB, A_SB, A_SB_maxx]
F_lim_upc = [F_PB, F_PB, F_PB2, F_PB2]
A_lim_upc = [A_PB_maxx, A_PB_max, A_PB_max, A_PB_maxx]
F_lim_loc = F_lim_upc
A_lim_loc = [A_PB_minx, A_PB_min, A_PB_min, A_PB_minx]
F_lim_upr = [F_SB2, F_SB2, F_max]
A_lim_upr = [A_SB_maxx, A_SB2, A_SB2]
if fb.fil[0]['rt'] == 'HIL':
F_lim_upc = [F_PB, F_PB, F_PB2, F_PB2]
A_lim_upc = [A_PB_maxx, A_PB_max, A_PB_max, A_PB_maxx]
F_lim_loc = F_lim_upc
A_lim_loc = [A_PB_minx, A_PB_min, A_PB_min, A_PB_minx]
F_lim_upr = np.array(F_lim_upr)
F_lim_lor = np.array(F_lim_lor)
F_lim_upl = np.array(F_lim_upl)
F_lim_lol = np.array(F_lim_lol)
F_lim_upc = np.array(F_lim_upc)
F_lim_loc = np.array(F_lim_loc)
_plot_specs() # plot specs in the range 0 ... f_S/2
if fb.fil[0]['freqSpecsRangeType'] != 'half':
# add plot limits for other half of the spectrum
if fb.fil[0][
'freqSpecsRangeType'] == 'sym': # frequency axis +/- f_S/2
F_lim_upl = -F_lim_upl
F_lim_lol = -F_lim_lol
F_lim_upc = -F_lim_upc
F_lim_loc = -F_lim_loc
F_lim_upr = -F_lim_upr
F_lim_lor = -F_lim_lor
else: # -> 'whole'
F_lim_upl = self.f_max - F_lim_upl
F_lim_lol = self.f_max - F_lim_lol
F_lim_upc = self.f_max - F_lim_upc
F_lim_loc = self.f_max - F_lim_loc
F_lim_upr = self.f_max - F_lim_upr
F_lim_lor = self.f_max - F_lim_lor
_plot_specs()
#------------------------------------------------------------------------------
def draw_inset(self):
"""
Construct / destruct second axes for an inset second plot
"""
# TODO: try ax1 = zoomed_inset_axes(ax, 6, loc=1) # zoom = 6
# TODO: choose size & position of inset, maybe dependent on filter type
# or specs (i.e. where is passband etc.)
# DEBUG
# print(self.cmbInset.currentIndex(), self.mplwidget.fig.axes) # list of axes in Figure
# for ax in self.mplwidget.fig.axes:
# print(ax)
# print("cmbInset, inset_idx:",self.cmbInset.currentIndex(), self.inset_idx)
if self.cmbInset.currentIndex() > 0:
if self.inset_idx == 0:
# Inset was turned off before, create a new one
# Add an axes at position rect [left, bottom, width, height]:
self.ax_i = self.mplwidget.fig.add_axes([0.65, 0.61, .3, .3])
self.ax_i.clear() # clear old plot and specs
# draw an opaque background with the extent of the inset plot:
# self.ax_i.patch.set_facecolor('green') # without label area
# self.mplwidget.fig.patch.set_facecolor('green') # whole figure
extent = self.mplwidget.get_full_extent(self.ax_i, pad=0.0)
# Transform this back to figure coordinates - otherwise, it
# won't behave correctly when the size of the plot is changed:
extent = extent.transformed(
self.mplwidget.fig.transFigure.inverted())
rect = Rectangle((extent.xmin, extent.ymin),
extent.width,
extent.height,
facecolor=rcParams['figure.facecolor'],
edgecolor='none',
transform=self.mplwidget.fig.transFigure,
zorder=-1)
self.ax_i.patches.append(rect)
self.ax_i.set_xlim(fb.fil[0]['freqSpecsRange'])
self.ax_i.plot(self.F, self.H_plt)
if self.cmbInset.currentIndex() == 1: # edit / navigate inset
self.ax_i.set_navigate(True)
self.ax.set_navigate(False)
if self.chkSpecs.isChecked():
self.plot_spec_limits(self.ax_i)
else: # edit / navigate main plot
self.ax_i.set_navigate(False)
self.ax.set_navigate(True)
else: # inset has been turned off, delete it
self.ax.set_navigate(True)
try:
#remove ax_i from the figure
self.mplwidget.fig.delaxes(self.ax_i)
except AttributeError:
pass
self.inset_idx = self.cmbInset.currentIndex() # update index
self.draw()
#------------------------------------------------------------------------------
def draw_phase(self, ax):
"""
Draw phase on second y-axis in the axes system passed as the argument
"""
if hasattr(self, 'ax_p'):
self.mplwidget.fig.delaxes(self.ax_p)
del self.ax_p
# try:
# self.mplwidget.fig.delaxes(self.ax_p)
# except (KeyError, AttributeError):
# pass
if self.chkPhase.isChecked():
self.ax_p = ax.twinx(
) # second axes system with same x-axis for phase
self.ax_p.is_twin = True # mark this as 'twin' to suppress second grid in mpl_widget
#
phi_str = r'$\angle H(\mathrm{e}^{\mathrm{j} \Omega})$'
if fb.fil[0]['plt_phiUnit'] == 'rad':
phi_str += ' in rad ' + r'$\rightarrow $'
scale = 1.
elif fb.fil[0]['plt_phiUnit'] == 'rad/pi':
phi_str += ' in rad' + r'$ / \pi \;\rightarrow $'
scale = 1. / np.pi
else:
phi_str += ' in deg ' + r'$\rightarrow $'
scale = 180. / np.pi
# replace nan and inf by finite values, otherwise np.unwrap yields
# an array full of nans
phi = np.angle(np.nan_to_num(self.H_c))
#-----------------------------------------------------------
self.ax_p.plot(self.F,
np.unwrap(phi) * scale,
'g-.',
label="Phase")
#-----------------------------------------------------------
self.ax_p.set_ylabel(phi_str)
#------------------------------------------------------------------------------
def calc_hf(self):
"""
(Re-)Calculate the complex frequency response H(f)
"""
# calculate H_cmplx(W) (complex) for W = 0 ... 2 pi:
self.W, self.H_cmplx = calc_Hcomplex(fb.fil[0], params['N_FFT'], True)
#------------------------------------------------------------------------------
def draw(self):
"""
Re-calculate \|H(f)\| and draw the figure
"""
self.chkAlign.setVisible(self.chkPhase.isChecked())
self.calc_hf()
self.update_view()
#------------------------------------------------------------------------------
def update_view(self):
"""
Draw the figure with new limits, scale etc without recalculating H(f)
"""
# suppress "divide by zero in log10" warnings
old_settings_seterr = np.seterr()
np.seterr(divide='ignore')
# Get corners for spec display from the parameters of the target specs subwidget
try:
param_list = fb.fil_tree[fb.fil[0]['rt']][fb.fil[0]['ft']]\
[fb.fil[0]['fc']][fb.fil[0]['fo']]['tspecs'][1]['amp']
except KeyError:
param_list = []
SB = [l for l in param_list if 'A_SB' in l]
PB = [l for l in param_list if 'A_PB' in l]
if SB:
A_min = min([fb.fil[0][l] for l in SB])
else:
A_min = 5e-4
if PB:
A_max = max([fb.fil[0][l] for l in PB])
else:
A_max = 1
if np.all(self.W) is None: # H(f) has not been calculated yet
self.calc_hf()
if self.cmbUnitsA.currentText() == 'Auto':
self.unitA = fb.fil[0]['amp_specs_unit']
else:
self.unitA = self.cmbUnitsA.currentText()
# only display log bottom widget for unit dB
self.lbl_log_bottom.setVisible(self.unitA == 'dB')
self.led_log_bottom.setVisible(self.unitA == 'dB')
self.lbl_log_unit.setVisible(self.unitA == 'dB')
# Linphase settings only makes sense for amplitude plot and
# for plottin real/imag. part of H, not its magnitude
self.chkZerophase.setCheckable(self.unitA == 'V')
self.chkZerophase.setEnabled(self.unitA == 'V')
self.specs = self.chkSpecs.isChecked()
self.f_max = fb.fil[0]['f_max']
self.F_PB = fb.fil[0]['F_PB'] * self.f_max
self.f_maxB = fb.fil[0]['F_SB'] * self.f_max
self.A_PB = fb.fil[0]['A_PB']
self.A_PB2 = fb.fil[0]['A_PB2']
self.A_SB = fb.fil[0]['A_SB']
self.A_SB2 = fb.fil[0]['A_SB2']
f_lim = fb.fil[0]['freqSpecsRange']
#========= select frequency range to be displayed =====================
#=== shift, scale and select: W -> F, H_cplx -> H_c
self.F = self.W / (2 * np.pi) * self.f_max
if fb.fil[0]['freqSpecsRangeType'] == 'sym':
# shift H and F by f_S/2
self.H_c = np.fft.fftshift(self.H_cmplx)
self.F -= self.f_max / 2.
elif fb.fil[0]['freqSpecsRangeType'] == 'half':
# only use the first half of H and F
self.H_c = self.H_cmplx[0:params['N_FFT'] // 2]
self.F = self.F[0:params['N_FFT'] // 2]
else: # fb.fil[0]['freqSpecsRangeType'] == 'whole'
# use H and F as calculated
self.H_c = self.H_cmplx
# now calculate mag / real / imaginary part of H_c:
if self.chkZerophase.isChecked(): # remove the linear phase
self.H_c = self.H_c * np.exp(
1j * self.W[0:len(self.F)] * fb.fil[0]["N"] / 2.)
if self.cmbShowH.currentIndex() == 0: # show magnitude of H
H = abs(self.H_c)
H_str = r'$|H(\mathrm{e}^{\mathrm{j} \Omega})|$'
elif self.cmbShowH.currentIndex() == 1: # show real part of H
H = self.H_c.real
H_str = r'$\Re \{H(\mathrm{e}^{\mathrm{j} \Omega})\}$'
else: # show imag. part of H
H = self.H_c.imag
H_str = r'$\Im \{H(\mathrm{e}^{\mathrm{j} \Omega})\}$'
#================ Main Plotting Routine =========================
#=== clear the axes and (re)draw the plot (if selectable)
if self.ax.get_navigate():
if self.unitA == 'dB':
self.log_bottom = safe_eval(self.led_log_bottom.text(),
self.log_bottom,
return_type='float',
sign='neg')
self.led_log_bottom.setText(str(self.log_bottom))
self.H_plt = np.maximum(20 * np.log10(abs(H)), self.log_bottom)
A_lim = [self.log_bottom, 2]
H_str += ' in dB ' + r'$\rightarrow$'
elif self.unitA == 'V': # 'lin'
self.H_plt = H
if self.cmbShowH.currentIndex(
) != 0: # H can be less than zero
A_min = max(self.lin_neg_bottom,
np.nanmin(self.H_plt[np.isfinite(self.H_plt)]))
else:
A_min = 0
A_lim = [A_min, (1.05 + A_max)]
H_str += ' in V ' + r'$\rightarrow $'
self.ax.axhline(linewidth=1, color='k') # horizontal line at 0
else: # unit is W
A_lim = [0, (1.03 + A_max)**2.]
self.H_plt = H * H.conj()
H_str += ' in W ' + r'$\rightarrow $'
#logger.debug("lim: {0}, min: {1}, max: {2} - {3}".format(A_lim, A_min, A_max, self.H_plt[0]))
#-----------------------------------------------------------
self.ax.clear()
self.ax.plot(self.F, self.H_plt, label='H(f)')
# TODO: self.draw_inset() # this gives an infinite recursion
self.draw_phase(self.ax)
#-----------------------------------------------------------
#============= Set Limits and draw specs =========================
if self.chkSpecs.isChecked():
self.plot_spec_limits(self.ax)
# self.ax_bounds = [self.ax.get_ybound()[0], self.ax.get_ybound()[1]]#, self.ax.get]
self.ax.set_xlim(f_lim)
self.ax.set_ylim(A_lim)
# logger.warning("set limits")
self.ax.set_xlabel(fb.fil[0]['plt_fLabel'])
self.ax.set_ylabel(H_str)
if self.chkPhase.isChecked():
self.ax.set_title(r'Magnitude and Phase Frequency Response')
else:
self.ax.set_title(r'Magnitude Frequency Response')
self.ax.xaxis.set_minor_locator(
AutoMinorLocator()) # enable minor ticks
self.ax.yaxis.set_minor_locator(
AutoMinorLocator()) # enable minor ticks
np.seterr(**old_settings_seterr)
self.redraw()
#------------------------------------------------------------------------------
def redraw(self):
"""
Redraw the canvas when e.g. the canvas size has changed
"""
if hasattr(self, 'ax_p') and self.chkAlign.isChecked():
# Align gridlines between H(f) and phi nicely
self.align_y_axes(self.ax, self.ax_p)
self.mplwidget.redraw()
def _construct_ui(self):
"""
Define and construct the subwidgets
"""
modes = ['| H |', 're{H}', 'im{H}']
self.cmbShowH = QComboBox(self)
self.cmbShowH.addItems(modes)
self.cmbShowH.setObjectName("cmbUnitsH")
self.cmbShowH.setToolTip(
"Show magnitude, real / imag. part of H or H \n"
"without linear phase (acausal system).")
self.cmbShowH.setCurrentIndex(0)
self.lblIn = QLabel("in", self)
units = ['dB', 'V', 'W', 'Auto']
self.cmbUnitsA = QComboBox(self)
self.cmbUnitsA.addItems(units)
self.cmbUnitsA.setObjectName("cmbUnitsA")
self.cmbUnitsA.setToolTip(
"<span>Set unit for y-axis:\n"
"dB is attenuation (positive values), V and W are gain (less than 1).</span>"
)
self.cmbUnitsA.setCurrentIndex(0)
self.lbl_log_bottom = QLabel("Bottom", self)
self.led_log_bottom = QLineEdit(self)
self.led_log_bottom.setText(str(self.log_bottom))
self.led_log_bottom.setToolTip(
"<span>Minimum display value for dB. scale.</span>")
self.lbl_log_unit = QLabel("dB", self)
self.cmbShowH.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.cmbUnitsA.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.chkZerophase = QCheckBox("Zero phase", self)
self.chkZerophase.setToolTip(
"<span>Remove linear phase calculated from filter order.\n"
"Attention: This makes no sense for a non-linear phase system!</span>"
)
self.lblInset = QLabel("Inset", self)
self.cmbInset = QComboBox(self)
self.cmbInset.addItems(['off', 'edit', 'fixed'])
self.cmbInset.setObjectName("cmbInset")
self.cmbInset.setToolTip("Display/edit second inset plot")
self.cmbInset.setCurrentIndex(0)
self.inset_idx = 0 # store previous index for comparison
self.chkSpecs = QCheckBox("Specs", self)
self.chkSpecs.setChecked(False)
self.chkSpecs.setToolTip("Display filter specs as hatched regions")
self.chkPhase = QCheckBox("Phase", self)
self.chkPhase.setToolTip("Overlay phase")
self.chkPhase.setChecked(False)
self.chkAlign = QCheckBox("Align", self)
self.chkAlign.setToolTip(
"<span>Try to align grids for magnitude and phase "
"(doesn't work in all cases).</span>")
self.chkAlign.setChecked(True)
self.chkAlign.setVisible(self.chkPhase.isChecked())
#----------------------------------------------------------------------
# ### frmControls ###
#
# This widget encompasses all control subwidgets
#----------------------------------------------------------------------
layHControls = QHBoxLayout()
layHControls.addStretch(10)
layHControls.addWidget(self.cmbShowH)
layHControls.addWidget(self.lblIn)
layHControls.addWidget(self.cmbUnitsA)
layHControls.addStretch(1)
layHControls.addWidget(self.lbl_log_bottom)
layHControls.addWidget(self.led_log_bottom)
layHControls.addWidget(self.lbl_log_unit)
layHControls.addStretch(1)
layHControls.addWidget(self.chkZerophase)
layHControls.addStretch(1)
layHControls.addWidget(self.lblInset)
layHControls.addWidget(self.cmbInset)
layHControls.addStretch(1)
layHControls.addWidget(self.chkSpecs)
layHControls.addStretch(1)
layHControls.addWidget(self.chkPhase)
layHControls.addWidget(self.chkAlign)
layHControls.addStretch(10)
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layHControls)
#----------------------------------------------------------------------
# ### mplwidget ###
#
# main widget, encompassing the other widgets
#----------------------------------------------------------------------
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.mplwidget.mplToolbar.a_he.setEnabled(True)
self.mplwidget.mplToolbar.a_he.info = "manual/plot_hf.html"
self.setLayout(self.mplwidget.layVMainMpl)
self.init_axes()
self.draw() # calculate and draw |H(f)|
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.cmbUnitsA.currentIndexChanged.connect(self.draw)
self.led_log_bottom.editingFinished.connect(self.update_view)
self.cmbShowH.currentIndexChanged.connect(self.draw)
self.chkZerophase.clicked.connect(self.draw)
self.cmbInset.currentIndexChanged.connect(self.draw_inset)
self.chkSpecs.clicked.connect(self.draw)
self.chkPhase.clicked.connect(self.draw)
self.chkAlign.clicked.connect(self.draw)
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
class Plot_3D(QWidget):
"""
Class for various 3D-plots:
- lin / log line plot of H(f)
- lin / log surf plot of H(z)
- optional display of poles / zeros
"""
# incoming, connected in sender widget (locally connected to self.process_signals() )
sig_rx = pyqtSignal(object)
# sig_tx = pyqtSignal(object) # outgoing from process_signals
def __init__(self, parent):
super(Plot_3D, self).__init__(parent)
self.zmin = 0
self.zmax = 4
self.zmin_dB = -80
self.cmap_default = 'RdYlBu'
self.data_changed = True # flag whether data has changed
self.tool_tip = "3D magnitude response |H(z)|"
self.tab_label = "3D"
self._construct_UI()
#------------------------------------------------------------------------------
def process_sig_rx(self, dict_sig=None):
"""
Process signals coming from the navigation toolbar and from ``sig_rx``
"""
logger.debug("Processing {0} | data_changed = {1}, visible = {2}"\
.format(dict_sig, self.data_changed, self.isVisible()))
if self.isVisible():
if 'data_changed' in dict_sig or 'home' in dict_sig or self.data_changed:
self.draw()
self.data_changed = False
else:
if 'data_changed' in dict_sig:
self.data_changed = True
#------------------------------------------------------------------------------
def _construct_UI(self):
self.chkLog = QCheckBox("Log.", self)
self.chkLog.setObjectName("chkLog")
self.chkLog.setToolTip("Logarithmic scale")
self.chkLog.setChecked(False)
self.chk_plot_in_UC = QCheckBox("|z| < 1", self)
self.chk_plot_in_UC.setObjectName("chk_plot_in_UC")
self.chk_plot_in_UC.setToolTip("Only plot H(z) within the unit circle")
self.chk_plot_in_UC.setChecked(False)
self.lblBottom = QLabel("Bottom:", self)
self.ledBottom = QLineEdit(self)
self.ledBottom.setObjectName("ledBottom")
self.ledBottom.setText(str(self.zmin))
self.ledBottom.setToolTip("Minimum display value.")
self.lblBottomdB = QLabel("dB", self)
self.lblBottomdB.setVisible(self.chkLog.isChecked())
self.lblTop = QLabel("Top:", self)
self.ledTop = QLineEdit(self)
self.ledTop.setObjectName("ledTop")
self.ledTop.setText(str(self.zmax))
self.ledTop.setToolTip("Maximum display value.")
self.lblTopdB = QLabel("dB", self)
self.lblTopdB.setVisible(self.chkLog.isChecked())
self.chkUC = QCheckBox("UC", self)
self.chkUC.setObjectName("chkUC")
self.chkUC.setToolTip("Plot unit circle")
self.chkUC.setChecked(True)
self.chkPZ = QCheckBox("P/Z", self)
self.chkPZ.setObjectName("chkPZ")
self.chkPZ.setToolTip("Plot poles and zeros")
self.chkPZ.setChecked(True)
self.chkHf = QCheckBox("H(f)", self)
self.chkHf.setObjectName("chkHf")
self.chkHf.setToolTip("Plot H(f) along the unit circle")
self.chkHf.setChecked(True)
modes = ['None', 'Mesh', 'Surf', 'Contour']
self.cmbMode3D = QComboBox(self)
self.cmbMode3D.addItems(modes)
self.cmbMode3D.setObjectName("cmbShow3D")
self.cmbMode3D.setToolTip("Select 3D-plot mode.")
self.cmbMode3D.setCurrentIndex(0)
self.cmbMode3D.setSizeAdjustPolicy(QComboBox.AdjustToContents)
self.chkColormap_r = QCheckBox("reverse", self)
self.chkColormap_r.setToolTip("reverse colormap")
self.chkColormap_r.setChecked(True)
self.cmbColormap = QComboBox(self)
self._init_cmb_colormap(cmap_init=self.cmap_default)
self.cmbColormap.setToolTip("Select colormap")
self.chkColBar = QCheckBox("Colorbar", self)
self.chkColBar.setObjectName("chkColBar")
self.chkColBar.setToolTip("Show colorbar")
self.chkColBar.setChecked(False)
self.chkLighting = QCheckBox("Lighting", self)
self.chkLighting.setObjectName("chkLighting")
self.chkLighting.setToolTip("Enable light source")
self.chkLighting.setChecked(False)
self.lblAlpha = QLabel("Alpha", self)
self.diaAlpha = QDial(self)
self.diaAlpha.setRange(0., 10.)
self.diaAlpha.setValue(10)
self.diaAlpha.setTracking(False) # produce less events when turning
self.diaAlpha.setFixedHeight(30)
self.diaAlpha.setFixedWidth(30)
self.diaAlpha.setWrapping(False)
self.diaAlpha.setToolTip(
"<span>Set transparency for surf and contour plots.</span>")
self.lblHatch = QLabel("Stride", self)
self.diaHatch = QDial(self)
self.diaHatch.setRange(0., 9.)
self.diaHatch.setValue(5)
self.diaHatch.setTracking(False) # produce less events when turning
self.diaHatch.setFixedHeight(30)
self.diaHatch.setFixedWidth(30)
self.diaHatch.setWrapping(False)
self.diaHatch.setToolTip("Set line density for various plots.")
self.chkContour2D = QCheckBox("Contour2D", self)
self.chkContour2D.setObjectName("chkContour2D")
self.chkContour2D.setToolTip("Plot 2D-contours at z =0")
self.chkContour2D.setChecked(False)
#----------------------------------------------------------------------
# LAYOUT for UI widgets
#----------------------------------------------------------------------
layGControls = QGridLayout()
layGControls.addWidget(self.chkLog, 0, 0)
layGControls.addWidget(self.chk_plot_in_UC, 1, 0)
layGControls.addWidget(self.lblTop, 0, 2)
layGControls.addWidget(self.ledTop, 0, 4)
layGControls.addWidget(self.lblTopdB, 0, 5)
layGControls.addWidget(self.lblBottom, 1, 2)
layGControls.addWidget(self.ledBottom, 1, 4)
layGControls.addWidget(self.lblBottomdB, 1, 5)
layGControls.setColumnStretch(5, 1)
layGControls.addWidget(self.chkUC, 0, 6)
layGControls.addWidget(self.chkHf, 1, 6)
layGControls.addWidget(self.chkPZ, 0, 8)
layGControls.addWidget(self.cmbMode3D, 0, 10)
layGControls.addWidget(self.chkContour2D, 1, 10)
layGControls.addWidget(self.cmbColormap, 0, 12, 1, 1)
layGControls.addWidget(self.chkColormap_r, 1, 12)
layGControls.addWidget(self.chkLighting, 0, 14)
layGControls.addWidget(self.chkColBar, 1, 14)
layGControls.addWidget(self.lblAlpha, 0, 15)
layGControls.addWidget(self.diaAlpha, 0, 16)
layGControls.addWidget(self.lblHatch, 1, 15)
layGControls.addWidget(self.diaHatch, 1, 16)
# This widget encompasses all control subwidgets
self.frmControls = QFrame(self)
self.frmControls.setObjectName("frmControls")
self.frmControls.setLayout(layGControls)
#----------------------------------------------------------------------
# mplwidget
#----------------------------------------------------------------------
# This is the plot pane widget, encompassing the other widgets
self.mplwidget = MplWidget(self)
self.mplwidget.layVMainMpl.addWidget(self.frmControls)
self.mplwidget.layVMainMpl.setContentsMargins(*params['wdg_margins'])
self.mplwidget.mplToolbar.a_he.setEnabled(True)
self.mplwidget.mplToolbar.a_he.info = "manual/plot_3d.html"
self.setLayout(self.mplwidget.layVMainMpl)
self._init_grid() # initialize grid and do initial plot
#----------------------------------------------------------------------
# GLOBAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.sig_rx.connect(self.process_sig_rx)
#----------------------------------------------------------------------
# LOCAL SIGNALS & SLOTs
#----------------------------------------------------------------------
self.chkLog.clicked.connect(self._log_clicked)
self.ledBottom.editingFinished.connect(self._log_clicked)
self.ledTop.editingFinished.connect(self._log_clicked)
self.chk_plot_in_UC.clicked.connect(self._init_grid)
self.chkUC.clicked.connect(self.draw)
self.chkHf.clicked.connect(self.draw)
self.chkPZ.clicked.connect(self.draw)
self.cmbMode3D.currentIndexChanged.connect(self.draw)
self.chkColBar.clicked.connect(self.draw)
self.cmbColormap.currentIndexChanged.connect(self.draw)
self.chkColormap_r.clicked.connect(self.draw)
self.chkLighting.clicked.connect(self.draw)
self.diaAlpha.valueChanged.connect(self.draw)
self.diaHatch.valueChanged.connect(self.draw)
self.chkContour2D.clicked.connect(self.draw)
self.mplwidget.mplToolbar.sig_tx.connect(self.process_sig_rx)
#self.mplwidget.mplToolbar.enable_plot(state = False) # disable initially
#------------------------------------------------------------------------------
def _init_cmb_colormap(self, cmap_init):
"""
Initialize combobox with available colormaps and try to set it to `cmap_init`
Since matplotlib 3.2 the reversed "*_r" colormaps are no longer contained in
`cm.datad`. They are now obtained by using the `reversed()` method (much simpler!)
`cm.datad` doesn't return the "new" colormaps like viridis, instead the
`colormaps()` method is used.
"""
self.cmbColormap.addItems(
[m for m in colormaps() if not m.endswith("_r")])
idx = self.cmbColormap.findText(cmap_init)
if idx == -1:
idx = 0
self.cmbColormap.setCurrentIndex(idx)
#------------------------------------------------------------------------------
def _init_grid(self):
""" Initialize (x,y,z) coordinate grid + (re)draw plot."""
phi_UC = np.linspace(0, 2 * pi, 400,
endpoint=True) # angles for unit circle
self.xy_UC = np.exp(1j * phi_UC) # x,y coordinates of unity circle
steps = 100 # number of steps for x, y, r, phi
#
self.xmin = -1.5
self.xmax = 1.5 # cartesian range limits
self.ymin = -1.5
self.ymax = 1.5
rmin = 0
rmax = 1 # polar range limits
# Calculate grids for 3D-Plots
dr = rmax / steps * 2 # grid size for polar range
dx = (self.xmax - self.xmin) / steps
dy = (self.ymax - self.ymin) / steps # grid size cartesian range
if self.chk_plot_in_UC.isChecked(): # # Plot circular range in 3D-Plot
[r,
phi] = np.meshgrid(np.arange(rmin, rmax, dr),
np.linspace(0, 2 * pi, steps, endpoint=True))
self.x = r * cos(phi)
self.y = r * sin(phi)
else: # cartesian grid
[self.x, self.y] = np.meshgrid(np.arange(self.xmin, self.xmax, dx),
np.arange(self.ymin, self.ymax, dy))
self.z = self.x + 1j * self.y # create coordinate grid for complex plane
self.draw() # initial plot
#------------------------------------------------------------------------------
def init_axes(self):
"""
Initialize and clear the axes to get rid of colorbar
The azimuth / elevation / distance settings of the camera are restored
after clearing the axes. See
http://stackoverflow.com/questions/4575588/matplotlib-3d-plot-with-pyqt4-in-qtabwidget-mplwidget
"""
self._save_axes()
self.mplwidget.fig.clf() # needed to get rid of colorbar
self.ax3d = self.mplwidget.fig.add_subplot(111, projection='3d')
#self.ax3d = self.mplwidget.fig.subplots(nrows=1, ncols=1, projection='3d')
self._restore_axes()
#------------------------------------------------------------------------------
def _save_axes(self):
"""
Store x/y/z - limits and camera position
"""
try:
self.azim = self.ax3d.azim
self.elev = self.ax3d.elev
self.dist = self.ax3d.dist
self.xlim = self.ax3d.get_xlim3d()
self.ylim = self.ax3d.get_ylim3d()
self.zlim = self.ax3d.get_zlim3d()
except AttributeError: # not yet initialized, set standard values
self.azim = -65
self.elev = 30
self.dist = 10
self.xlim = (self.xmin, self.xmax)
self.ylim = (self.ymin, self.ymax)
self.zlim = (self.zmin, self.zmax)
#------------------------------------------------------------------------------
def _restore_axes(self):
"""
Restore x/y/z - limits and camera position
"""
if self.mplwidget.mplToolbar.a_lk.isChecked():
self.ax3d.set_xlim3d(self.xlim)
self.ax3d.set_ylim3d(self.ylim)
self.ax3d.set_zlim3d(self.zlim)
self.ax3d.azim = self.azim
self.ax3d.elev = self.elev
self.ax3d.dist = self.dist
#------------------------------------------------------------------------------
def _log_clicked(self):
"""
Change scale and settings to log / lin when log setting is changed
Update min / max settings when lineEdits have been edited
"""
self.log = self.chkLog.isChecked()
if self.sender().objectName(
) == 'chkLog': # clicking chkLog triggered the slot
if self.log:
self.ledBottom.setText(str(self.zmin_dB))
self.zmax_dB = np.round(20 * log10(self.zmax), 2)
self.ledTop.setText(str(self.zmax_dB))
self.lblTopdB.setVisible(True)
self.lblBottomdB.setVisible(True)
else:
self.ledBottom.setText(str(self.zmin))
self.zmax = np.round(10**(self.zmax_dB / 20), 2)
self.ledTop.setText(str(self.zmax))
self.lblTopdB.setVisible(False)
self.lblBottomdB.setVisible(False)
else: # finishing a lineEdit field triggered the slot
if self.log:
self.zmin_dB = safe_eval(self.ledBottom.text(),
self.zmin_dB,
return_type='float')
self.ledBottom.setText(str(self.zmin_dB))
self.zmax_dB = safe_eval(self.ledTop.text(),
self.zmax_dB,
return_type='float')
self.ledTop.setText(str(self.zmax_dB))
else:
self.zmin = safe_eval(self.ledBottom.text(),
self.zmin,
return_type='float')
self.ledBottom.setText(str(self.zmin))
self.zmax = safe_eval(self.ledTop.text(),
self.zmax,
return_type='float')
self.ledTop.setText(str(self.zmax))
self.draw()
#------------------------------------------------------------------------------
def draw(self):
"""
Main drawing entry point: perform the actual plot
"""
self.draw_3d()
#------------------------------------------------------------------------------
def draw_3d(self):
"""
Draw various 3D plots
"""
self.init_axes()
bb = fb.fil[0]['ba'][0]
aa = fb.fil[0]['ba'][1]
zz = np.array(fb.fil[0]['zpk'][0])
pp = np.array(fb.fil[0]['zpk'][1])
wholeF = fb.fil[0]['freqSpecsRangeType'] != 'half' # not used
f_S = fb.fil[0]['f_S']
N_FFT = params['N_FFT']
alpha = self.diaAlpha.value() / 10.
cmap = cm.get_cmap(str(self.cmbColormap.currentText()))
if self.chkColormap_r.isChecked():
cmap = cmap.reversed() # use reversed colormap
# Number of Lines /step size for H(f) stride, mesh, contour3d:
stride = 10 - self.diaHatch.value()
NL = 3 * self.diaHatch.value() + 5
surf_enabled = qget_cmb_box(self.cmbMode3D,
data=False) in {'Surf', 'Contour'}
self.cmbColormap.setEnabled(surf_enabled)
self.chkColormap_r.setEnabled(surf_enabled)
self.chkLighting.setEnabled(surf_enabled)
self.chkColBar.setEnabled(surf_enabled)
self.diaAlpha.setEnabled(surf_enabled or self.chkContour2D.isChecked())
#cNorm = colors.Normalize(vmin=0, vmax=values[-1])
#scalarMap = cmx.ScalarMappable(norm=cNorm, cmap=jet)
#-----------------------------------------------------------------------------
# Calculate H(w) along the upper half of unity circle
#-----------------------------------------------------------------------------
[w, H] = sig.freqz(bb, aa, worN=N_FFT, whole=True)
H = np.nan_to_num(H) # replace nans and inf by finite numbers
H_abs = abs(H)
H_max = max(H_abs)
H_min = min(H_abs)
#f = w / (2 * pi) * f_S # translate w to absolute frequencies
#F_min = f[np.argmin(H_abs)]
plevel_rel = 1.05 # height of plotted pole position relative to zmax
zlevel_rel = 0.1 # height of plotted zero position relative to zmax
if self.chkLog.isChecked(): # logarithmic scale
# suppress "divide by zero in log10" warnings
old_settings_seterr = np.seterr()
np.seterr(divide='ignore')
bottom = np.floor(max(self.zmin_dB, 20 * log10(H_min)) / 10) * 10
top = self.zmax_dB
top_bottom = top - bottom
zlevel = bottom - top_bottom * zlevel_rel
if self.cmbMode3D.currentText(
) == 'None': # "Poleposition" for H(f) plot only
plevel_top = 2 * bottom - zlevel # height of displayed pole position
plevel_btm = bottom
else:
plevel_top = top + top_bottom * (plevel_rel - 1)
plevel_btm = top
np.seterr(**old_settings_seterr)
else: # linear scale
bottom = max(self.zmin, H_min) # min. display value
top = self.zmax # max. display value
top_bottom = top - bottom
# top = zmax_rel * H_max # calculate display top from max. of H(f)
zlevel = bottom + top_bottom * zlevel_rel # height of displayed zero position
if self.cmbMode3D.currentText(
) == 'None': # "Poleposition" for H(f) plot only
#H_max = np.clip(max(H_abs), 0, self.zmax)
# make height of displayed poles same to zeros
plevel_top = bottom + top_bottom * zlevel_rel
plevel_btm = bottom
else:
plevel_top = plevel_rel * top
plevel_btm = top
# calculate H(jw)| along the unity circle and |H(z)|, each clipped
# between bottom and top
H_UC = H_mag(bb,
aa,
self.xy_UC,
top,
H_min=bottom,
log=self.chkLog.isChecked())
Hmag = H_mag(bb,
aa,
self.z,
top,
H_min=bottom,
log=self.chkLog.isChecked())
#===============================================================
## plot Unit Circle (UC)
#===============================================================
if self.chkUC.isChecked():
# Plot unit circle and marker at (1,0):
self.ax3d.plot(self.xy_UC.real,
self.xy_UC.imag,
ones(len(self.xy_UC)) * bottom,
lw=2,
color='k')
self.ax3d.plot([0.97, 1.03], [0, 0], [bottom, bottom],
lw=2,
color='k')
#===============================================================
## plot ||H(f)| along unit circle as 3D-lineplot
#===============================================================
if self.chkHf.isChecked():
self.ax3d.plot(self.xy_UC.real,
self.xy_UC.imag,
H_UC,
alpha=0.8,
lw=4)
# draw once more as dashed white line to improve visibility
self.ax3d.plot(self.xy_UC.real, self.xy_UC.imag, H_UC, 'w--', lw=4)
if stride < 10: # plot thin vertical line every stride points on the UC
for k in range(len(self.xy_UC[::stride])):
self.ax3d.plot([
self.xy_UC.real[::stride][k],
self.xy_UC.real[::stride][k]
], [
self.xy_UC.imag[::stride][k],
self.xy_UC.imag[::stride][k]
], [
np.ones(len(self.xy_UC[::stride]))[k] * bottom,
H_UC[::stride][k]
],
linewidth=1,
color=(0.5, 0.5, 0.5))
#===============================================================
## plot Poles and Zeros
#===============================================================
if self.chkPZ.isChecked():
PN_SIZE = 8 # size of P/N symbols
# Plot zero markers at |H(z_i)| = zlevel with "stems":
self.ax3d.plot(zz.real,
zz.imag,
ones(len(zz)) * zlevel,
'o',
markersize=PN_SIZE,
markeredgecolor='blue',
markeredgewidth=2.0,
markerfacecolor='none')
for k in range(len(zz)): # plot zero "stems"
self.ax3d.plot([zz[k].real, zz[k].real],
[zz[k].imag, zz[k].imag], [bottom, zlevel],
linewidth=1,
color='b')
# Plot the poles at |H(z_p)| = plevel with "stems":
self.ax3d.plot(np.real(pp),
np.imag(pp),
plevel_top,
'x',
markersize=PN_SIZE,
markeredgewidth=2.0,
markeredgecolor='red')
for k in range(len(pp)): # plot pole "stems"
self.ax3d.plot([pp[k].real, pp[k].real],
[pp[k].imag, pp[k].imag],
[plevel_btm, plevel_top],
linewidth=1,
color='r')
#===============================================================
## 3D-Plots of |H(z)| clipped between |H(z)| = top
#===============================================================
m_cb = cm.ScalarMappable(
cmap=cmap) # normalized proxy object that is mappable
m_cb.set_array(Hmag) # for colorbar
#---------------------------------------------------------------
## 3D-mesh plot
#---------------------------------------------------------------
if self.cmbMode3D.currentText() == 'Mesh':
# fig_mlab = mlab.figure(fgcolor=(0., 0., 0.), bgcolor=(1, 1, 1))
# self.ax3d.set_zlim(0,2)
self.ax3d.plot_wireframe(self.x,
self.y,
Hmag,
rstride=5,
cstride=stride,
linewidth=1,
color='gray')
#---------------------------------------------------------------
## 3D-surface plot
#---------------------------------------------------------------
# http://stackoverflow.com/questions/28232879/phong-shading-for-shiny-python-3d-surface-plots
elif self.cmbMode3D.currentText() == 'Surf':
if MLAB:
## Mayavi
surf = mlab.surf(self.x,
self.y,
H_mag,
colormap='RdYlBu',
warp_scale='auto')
# Change the visualization parameters.
surf.actor.property.interpolation = 'phong'
surf.actor.property.specular = 0.1
surf.actor.property.specular_power = 5
# s = mlab.contour_surf(self.x, self.y, Hmag, contour_z=0)
mlab.show()
else:
if self.chkLighting.isChecked():
ls = LightSource(azdeg=0,
altdeg=65) # Create light source object
rgb = ls.shade(
Hmag, cmap=cmap) # Shade data, creating an rgb array
cmap_surf = None
else:
rgb = None
cmap_surf = cmap
# s = self.ax3d.plot_surface(self.x, self.y, Hmag,
# alpha=OPT_3D_ALPHA, rstride=1, cstride=1, cmap=cmap,
# linewidth=0, antialiased=False, shade=True, facecolors = rgb)
# s.set_edgecolor('gray')
s = self.ax3d.plot_surface(self.x,
self.y,
Hmag,
alpha=alpha,
rstride=1,
cstride=1,
linewidth=0,
antialiased=False,
facecolors=rgb,
cmap=cmap_surf,
shade=True)
s.set_edgecolor(None)
#---------------------------------------------------------------
## 3D-Contour plot
#---------------------------------------------------------------
elif self.cmbMode3D.currentText() == 'Contour':
s = self.ax3d.contourf3D(self.x,
self.y,
Hmag,
NL,
alpha=alpha,
cmap=cmap)
#---------------------------------------------------------------
## 2D-Contour plot
# TODO: 2D contour plots do not plot correctly together with 3D plots in
# current matplotlib 1.4.3 -> disable them for now
# TODO: zdir = x / y delivers unexpected results -> rather plot max(H)
# along the other axis?
# TODO: colormap is created depending on the zdir = 'z' contour plot
# -> set limits of (all) other plots manually?
if self.chkContour2D.isChecked():
# self.ax3d.contourf(x, y, Hmag, 20, zdir='x', offset=xmin,
# cmap=cmap, alpha = alpha)#, vmin = bottom)#, vmax = top, vmin = bottom)
# self.ax3d.contourf(x, y, Hmag, 20, zdir='y', offset=ymax,
# cmap=cmap, alpha = alpha)#, vmin = bottom)#, vmax = top, vmin = bottom)
s = self.ax3d.contourf(self.x,
self.y,
Hmag,
NL,
zdir='z',
offset=bottom - (top - bottom) * 0.05,
cmap=cmap,
alpha=alpha)
# plot colorbar for suitable plot modes
if self.chkColBar.isChecked() and (self.chkContour2D.isChecked()
or str(self.cmbMode3D.currentText())
in {'Contour', 'Surf'}):
self.colb = self.mplwidget.fig.colorbar(m_cb,
ax=self.ax3d,
shrink=0.8,
aspect=20,
pad=0.02,
fraction=0.08)
#----------------------------------------------------------------------
## Set view limits and labels
#----------------------------------------------------------------------
if not self.mplwidget.mplToolbar.a_lk.isChecked():
self.ax3d.set_xlim3d(self.xmin, self.xmax)
self.ax3d.set_ylim3d(self.ymin, self.ymax)
self.ax3d.set_zlim3d(bottom, top)
else:
self._restore_axes()
self.ax3d.set_xlabel('Re') #(fb.fil[0]['plt_fLabel'])
self.ax3d.set_ylabel(
'Im'
) #(r'$ \tau_g(\mathrm{e}^{\mathrm{j} \Omega}) / T_S \; \rightarrow $')
# self.ax3d.set_zlabel(r'$|H(z)|\; \rightarrow $')
self.ax3d.set_title(
r'3D-Plot of $|H(\mathrm{e}^{\mathrm{j} \Omega})|$ and $|H(z)|$')
self.redraw()
#------------------------------------------------------------------------------
def redraw(self):
"""
Redraw the canvas when e.g. the canvas size has changed
"""
self.mplwidget.redraw()
