def main(argv):
"""
This function shows the following sequence of operation.
**Support for login/logout sequence for Sessionless**
*login* returns a pseudo session without actual Login.
*REST operation support* for GET Examples.
*logout* no-operation logout.
**Dummy session creation and operations**
*Pseudo session* using dummy function without login.
*REST operation support* for GET/PATCH examples.
"""
# Login to the switch
login_sessionless = example_login(sessionless=True)
if pyfos_auth.is_failed_login(login_sessionless):
print(
"login failed because",
login_sessionless.get(
pyfos_auth.CREDENTIAL_KEY)[pyfos_auth.LOGIN_ERROR_KEY])
sys.exit(3)
print("Login to Switch with session-less option, Actually there is no ",
"login done to switch.")
# Using sessionless Session for operation
print("\nGet the swithshow with session-less")
fcobj = fibrechannel_switch.get(login_sessionless)
pyfos_util.response_print(fcobj)
# Sessionless Session logout(No-operation)
pyfos_auth.logout(login_sessionless)
print("\nLogout session-less based login session no-op.")
# Dummy session to the switch
pseudosession = dummy_session()
print("\nGet swithshow using pseudo-session with session-less [Allowed].")
fcobj = fibrechannel_switch.get(pseudosession)
pyfos_util.response_print(fcobj)
# Patch operation example.
print("\nPatch using pseudo-session for session-less [Forbidden]")
fcobjnew = fibrechannel_switch()
fcobjnew.set_name(fcobj.peek_name())
fcobjnew.set_user_friendly_name("mybanner")
print("Patch with banner :", fcobjnew.peek_user_friendly_name())
ret = fcobjnew.patch(pseudosession)
pyfos_util.response_print(ret)
# Revert the banner to original
print("\nPatch using pseudo-session for session-less[Forbidden]")
print("Revert Patch with banner :", fcobj.peek_user_friendly_name())
fcobjnew.set_user_friendly_name(fcobj.peek_user_friendly_name())
ret = fcobjnew.patch(pseudosession)
pyfos_util.response_print(ret)
print("No logout required for pseudo-session")
def set_ag_mode(session, ag_mode):
sw_obj = fibrechannel_switch()
current_sw = fibrechannel_switch.get(session)
if pyfos_util.is_failed_resp(current_sw):
return current_sw
sw_obj.set_name(current_sw.peek_name())
sw_obj.set_ag_mode(ag_mode)
# print(settings_obj)
return sw_obj.patch(session)
def modify_switch_ip_config_params(session,
ip_addresses=None,
gateways=None,
subnet_mask=None):
swobject = fibrechannel_switch()
if ip_addresses is not None:
swobject.set_ip_address_ip_address(ip_addresses)
if gateways is not None:
swobject.set_ip_static_gateway_list_ip_static_gateway(gateways)
if subnet_mask is not None:
swobject.set_subnet_mask(subnet_mask)
result = _modify_switch_ip_config_params(session, swobject)
return result
def main(argv):
valid_options = ["username"]
inputs = brcd_util.generic_input(argv, usage, valid_options)
session = pyfos_auth.login(inputs["login"],
inputs["password"],
inputs["ipaddr"],
inputs["secured"],
verbose=inputs["verbose"])
if pyfos_auth.is_failed_login(session):
print(
"login failed because",
session.get(pyfos_auth.CREDENTIAL_KEY)[pyfos_auth.LOGIN_ERROR_KEY])
usage()
sys.exit()
brcd_util.exit_register(session)
vfid = None
if 'vfid' in inputs:
vfid = inputs['vfid']
if vfid is not None:
pyfos_auth.vfid_set(session, vfid)
if "username" not in inputs:
usage()
sys.exit()
username = inputs["username"]
current_switch = pyfos_switch.fibrechannel_switch.get(session)
switch = pyfos_switch.fibrechannel_switch()
name = current_switch.peek_name()
switch.set_name(name)
switch.set_user_friendly_name(username)
result = switch.patch(session)
pyfos_util.response_print(result)
pyfos_auth.logout(session)
def modify_fibrechannel_switch(session, name=None, dynamic_load_sharing=None):
fibrechannel_switchObj = fibrechannel_switch()
fibrechannel_switchObj.set_name(name)
fibrechannel_switchObj.set_dynamic_load_sharing(dynamic_load_sharing)
return _modify_fibrechannel_switch(session, fibrechannel_switchObj)
def modify_fibrechannel_switch(session, name=None, lacp_system_priority=None):
fibrechannel_switchObj = fibrechannel_switch()
fibrechannel_switchObj.set_name(name)
fibrechannel_switchObj.set_lacp_system_priority(lacp_system_priority)
return _modify_fibrechannel_switch(session, fibrechannel_switchObj)
def main(argv):
# Login to the switch
print("\nLogin to the switch")
session = example_login()
if pyfos_auth.is_failed_login(session):
print(
"login failed because",
session.get(pyfos_auth.CREDENTIAL_KEY)[pyfos_auth.LOGIN_ERROR_KEY])
sys.exit(3)
# Get an instance of auth token manager
print("Get Auth Token Manager instance")
examplemgrauthtoken = exampleTokenManager()
# Display authtoken manager details
print("Display the Auth Token Manager details.")
examplemgrauthtoken.show()
# Delete any existing authtoken
ret = examplemgrauthtoken.delete(session)
print("Delete Auth Token from the switch\nRet:")
pyfos_util.response_print(ret)
# Display authtoken manager details
print("Display the Auth Token Manager details.")
examplemgrauthtoken.show()
# Generate the authtoken
ret = examplemgrauthtoken.generateToken(session)
print("Generate Auth Token from the switch\nRet:")
pyfos_util.response_print(ret)
# Display authtoken manager details
print("Display the Auth Token Manager details.")
examplemgrauthtoken.show()
print("Get the swithshow with regular session")
ret = fibrechannel_switch.get(session)
pyfos_util.response_print(ret)
# Session Logout
pyfos_auth.logout(session)
# Token based authentication session error scenario with default
# password used and not None.
print("AuthToken Login error scenario")
tokensession = example_login(tokenArg=examplemgrauthtoken)
if pyfos_auth.is_failed_login(tokensession):
print(
"Token based login failed because",
tokensession.get(
pyfos_auth.CREDENTIAL_KEY)[pyfos_auth.LOGIN_ERROR_KEY])
print("AuthToken Login Success scenario.")
# Token based authentication session Success scenario
tokensession = example_login(password=None, tokenArg=examplemgrauthtoken)
if pyfos_auth.is_failed_login(tokensession):
print(
"Token based login failed because",
tokensession.get(
pyfos_auth.CREDENTIAL_KEY)[pyfos_auth.LOGIN_ERROR_KEY])
sys.exit(3)
# Using Token Session for operation
print("Get the swithshow with authToken based login session.")
fcobj = fibrechannel_switch.get(tokensession)
pyfos_util.response_print(fcobj)
# Patch operation example.
fcobjnew = fibrechannel_switch()
fcobjnew.set_name(fcobj.peek_name())
fcobjnew.set_user_friendly_name("mybanner")
print("AuthToken login session patch with banner :",
fcobjnew.peek_user_friendly_name())
ret = fcobjnew.patch(tokensession)
pyfos_util.response_print(ret)
# Revert the banner to original
print("AuthToken login session patch revert banner :",
fcobj.peek_user_friendly_name())
fcobjnew.set_user_friendly_name(fcobj.peek_user_friendly_name())
ret = fcobjnew.patch(tokensession)
pyfos_util.response_print(ret)
print("AuthToken login session Logout")
# Token Session logout
pyfos_auth.logout(tokensession)