def test_Lam_Wind_28_wind_rad_tan(self):
"""Test machine plot with Slot 28 and winding rad=1, tan=2 and rad=2 and tan=1
"""
print("\nTest plot Slot 28")
plt.close("all")
test_obj = Machine()
test_obj.rotor = LamSlotWind(
Rint=35e-3,
Rext=84e-3,
is_internal=True,
is_stator=False,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.rotor.axial_vent = [
VentilationCirc(Zh=6, Alpha0=pi / 6, D0=15e-3, H0=0.045)
]
test_obj.rotor.slot = SlotW28(Zs=42,
W0=3.5e-3,
H0=0.45e-3,
R1=3.5e-3,
H3=14e-3,
W3=5e-3)
test_obj.rotor.winding = WindingCW2LT(qs=3, p=3)
test_obj.rotor.mat_type.mag = MatLamination(Wlam=0.5e-3)
test_obj.shaft = Shaft(Drsh=test_obj.rotor.Rint * 2, Lshaft=1)
test_obj.stator = LamSlotWind(
Rint=85e-3,
Rext=0.2,
is_internal=False,
is_stator=True,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.stator.slot = SlotW28(Zs=18,
W0=7e-3,
R1=10e-3,
H0=5e-3,
H3=30e-3,
W3=5e-3)
test_obj.stator.winding = WindingDW2L(qs=3, p=3, Lewout=60e-3)
test_obj.stator.mat_type.mag = MatLamination(Wlam=0.5e-3)
test_obj.frame = Frame(Rint=0.2, Rext=0.25, Lfra=1)
test_obj.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s28_1-Machine.png"))
# Rotor + stator + 2 for frame + 1 for Shaft
self.assertEqual(len(fig.axes[0].patches), 133)
test_obj.rotor.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s28_2-Rotor.png"))
# 2 for lam + Zs*2 for wind + 6 vent
self.assertEqual(len(fig.axes[0].patches), 92)
test_obj.stator.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s28_3-Stator.png"))
# 2 for lam, 2*Zs for wind
self.assertEqual(len(fig.axes[0].patches), 38)
def test_Lam_Wind_28_wind_22(self):
"""Test machine plot with Slot 28 and winding rad=2, tan=2
"""
plt.close("all")
test_obj = Machine()
test_obj.rotor = LamSlotWind(
Rint=0.01,
Rext=0.129,
is_internal=True,
is_stator=False,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.rotor.slot = SlotW28(Zs=6,
W0=20e-3,
R1=25e-3,
H0=10e-3,
H3=50e-3,
W3=15e-3)
test_obj.rotor.winding = WindingUD(user_wind_mat=wind_mat,
qs=4,
p=4,
Lewout=60e-3)
test_obj.shaft = Shaft(Drsh=test_obj.rotor.Rint * 2, Lshaft=1)
test_obj.stator = LamSlotWind(
Rint=0.13,
Rext=0.4,
is_internal=False,
is_stator=True,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.stator.axial_vent = [
VentilationCirc(Zh=6, Alpha0=pi / 6, D0=60e-3, H0=0.25)
]
test_obj.stator.slot = SlotW28(Zs=6,
W0=40e-3,
R1=50e-3,
H0=10e-3,
H3=70e-3,
W3=85e-3)
test_obj.stator.winding = WindingUD(user_wind_mat=wind_mat,
qs=4,
p=4,
Lewout=60e-3)
test_obj.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s28_4-Machine.png"))
# Rotor + stator + 0 for frame + 1 for shaft
self.assertEqual(len(fig.axes[0].patches), 59)
test_obj.rotor.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s28_5-Rotor.png"))
# 2 for lam + Zs*4 for wind
self.assertEqual(len(fig.axes[0].patches), 26)
test_obj.stator.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s28_6-Stator.png"))
# 2 for lam, 4*Zs for wind + 6 vents
self.assertEqual(len(fig.axes[0].patches), 32)
def test_Lam_Wind_21_wind_22(self):
"""Test machine plot with Slot 21 and winding rad=2, tan=2
"""
print("\nTest plot Slot 21")
plt.close("all")
test_obj = Machine()
test_obj.rotor = LamSlotWind(
Rint=0.2,
Rext=0.5,
is_internal=True,
is_stator=False,
L1=0.85,
Nrvd=3,
Wrvd=0.05,
)
test_obj.rotor.slot = SlotW21(
Zs=6,
W0=40e-3,
W1=60e-3,
W2=40e-3,
H0=20e-3,
H1=0,
H2=130e-3,
H1_is_rad=False,
)
test_obj.rotor.axial_vent.append(
VentilationTrap(Zh=6,
Alpha0=pi / 6,
W1=30e-3,
W2=60e-3,
D0=0.05,
H0=0.3))
test_obj.rotor.axial_vent.append(
VentilationTrap(Zh=6,
Alpha0=pi / 6,
W1=60e-3,
W2=90e-3,
D0=0.05,
H0=0.4))
test_obj.rotor.winding = WindingUD(user_wind_mat=wind_mat,
qs=4,
p=4,
Lewout=60e-3)
test_obj.rotor.mat_type.mag = MatLamination(Wlam=0.5e-3)
test_obj.shaft = Shaft(Drsh=test_obj.rotor.Rint * 2, Lshaft=1)
test_obj.stator = LamSlotWind(
Rint=0.51,
Rext=0.8,
is_internal=False,
is_stator=True,
L1=0.85,
Nrvd=3,
Wrvd=0.05,
)
test_obj.stator.slot = SlotW21(
Zs=18,
W0=40e-3,
W1=60e-3,
W2=90e-3,
H0=15e-3,
H1=35e-3,
H2=140e-3,
H1_is_rad=False,
)
test_obj.stator.winding = WindingDW2L(qs=3, p=3)
test_obj.stator.axial_vent.append(
VentilationCirc(Zh=12, Alpha0=pi / 6, D0=50e-3, H0=0.75))
test_obj.stator.mat_type.mag = MatLamination(Wlam=0.5e-3)
test_obj.stator.winding.Lewout = 60e-3
test_obj.frame = Frame(Rint=0.8, Rext=1, Lfra=1)
test_obj.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s21_1-Machine.png"))
# Rotor + Stator + 2 for frame + 1 for shaft
self.assertEqual(len(fig.axes[0].patches), 91)
test_obj.rotor.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s21_2-Rotor.png"))
# 2 for lam + 4*Zs for wind + 6 vents + 6 vents
self.assertEqual(len(fig.axes[0].patches), 38)
test_obj.stator.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s21_3-Stator.png"))
# 2 for lam + Zs*2 for wind + 12 vents
self.assertEqual(len(fig.axes[0].patches), 50)
def test_Lam_Wind_11_wind_22(self):
"""Test machine plot with Slot 11 and winding rad=2, tan=2
"""
print("\nTest plot Slot 11")
plt.close("all")
test_obj = MachineDFIM()
test_obj.rotor = LamSlotWind(
Rint=0.2,
Rext=0.5,
is_internal=True,
is_stator=False,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.rotor.axial_vent = [
VentilationCirc(Zh=6, Alpha0=pi / 6, D0=60e-3, H0=0.35)
]
test_obj.rotor.slot = SlotW11(
Zs=6,
W0=50e-3,
W1=60e-3,
W2=70e-3,
H0=20e-3,
H1=35e-3,
H2=130e-3,
H1_is_rad=False,
R1=10e-3,
)
test_obj.rotor.winding = WindingUD(user_wind_mat=wind_mat,
qs=4,
p=4,
Lewout=60e-3)
test_obj.rotor.mat_type.mag = MatMagnetics(Wlam=0.5e-3)
test_obj.shaft = Shaft(Drsh=test_obj.rotor.Rint * 2, Lshaft=1)
test_obj.stator = LamSlotWind(
Rint=0.51,
Rext=0.8,
is_internal=False,
is_stator=True,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.stator.slot = SlotW11(
Zs=18,
W0=40e-3,
W1=60e-3,
W2=90e-3,
H0=15e-3,
H1=35e-3,
H2=140e-3,
H1_is_rad=False,
R1=40e-3,
)
test_obj.stator.winding.Lewout = 60e-3
test_obj.stator.winding = WindingDW2L(qs=3, p=3)
test_obj.stator.mat_type.mag = MatMagnetics(Wlam=0.5e-3)
test_obj.frame = Frame(Rint=0.8, Rext=0.9, Lfra=1)
test_obj.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s11_1-Machine.png"))
# Rotor + Stator + 2 for frame + 1 for Shaft
self.assertEqual(len(fig.axes[0].patches), 73)
test_obj.rotor.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s11_2-Rotor.png"))
# 2 for lam + Zs*4 for wind + 6 vents
self.assertEqual(len(fig.axes[0].patches), 32)
test_obj.stator.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s11_3-Stator.png"))
# 2 for lam + Zs*2 for wind
self.assertEqual(len(fig.axes[0].patches), 38)
tooth = test_obj.rotor.slot.get_surface_tooth()
tooth.plot(color="r")
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s11_Tooth_in.png"))
tooth = test_obj.stator.slot.get_surface_tooth()
tooth.plot(color="r")
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s11_Tooth_out.png"))
def test_Lam_Wind_29_wind_22(self):
"""Test machine plot with Slot 29 and winding rad=2, tan=2
"""
print("\nTest plot Slot 29")
plt.close("all")
test_obj = Machine()
test_obj.rotor = LamSlotWind(Rint=0.1,
Rext=0.5,
is_internal=True,
is_stator=False,
L1=0.9,
Nrvd=2)
test_obj.rotor.axial_vent = [
VentilationCirc(Zh=6, Alpha0=pi / 6, D0=60e-3, H0=0.35)
]
test_obj.rotor.slot = SlotW29(Zs=6,
W0=0.05,
H0=0.05,
H1=0.1,
W1=0.1,
H2=0.2,
W2=0.15)
test_obj.rotor.winding = WindingUD(user_wind_mat=wind_mat,
qs=4,
p=4,
Lewout=60e-3)
test_obj.rotor.mat_type.magnetics = MatLamination(Wlam=0.5e-3)
test_obj.shaft = Shaft(Drsh=test_obj.rotor.Rint * 2, Lshaft=1)
test_obj.stator = LamSlotWind(
Rint=0.51,
Rext=0.8,
is_internal=False,
is_stator=True,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.stator.slot = SlotW29(Zs=6,
W0=0.05,
H0=0.025,
H1=0.04,
W1=0.1,
H2=0.15,
W2=0.2)
test_obj.stator.winding = WindingUD(user_wind_mat=wind_mat,
qs=4,
p=4,
Lewout=60e-3)
test_obj.stator.mat_type.magnetics = MatLamination(Wlam=0.5e-3)
test_obj.frame = Frame(Rint=0.8, Rext=0.9, Lfra=1)
test_obj.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s29_1-Machine.png"))
# rotor+stator+ 2 for frame + 1 for Shaft
self.assertEqual(len(fig.axes[0].patches), 61)
test_obj.rotor.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s29_2-Rotor.png"))
# 2 for lam, 4*Zs for wind + 6 vent
self.assertEqual(len(fig.axes[0].patches), 32)
test_obj.stator.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s29_3-Stator.png"))
# 2 for lam, 4*Zs for wind
self.assertEqual(len(fig.axes[0].patches), 26)
def test_Lam_Wind_26_wind_22(self):
"""Test machine plot with Slot 26 and winding rad=2, tan=2
"""
print("\nTest plot Slot 26")
plt.close("all")
test_obj = Machine()
test_obj.rotor = LamSlotWind(
Rint=0.2,
Rext=0.5,
is_internal=True,
is_stator=False,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.rotor.axial_vent = [
VentilationCirc(Zh=6, Alpha0=pi / 6, D0=60e-3, H0=0.35)
]
test_obj.rotor.slot = SlotW26(Zs=6,
W0=20e-3,
R1=30e-3,
H0=20e-3,
H1=20e-3)
test_obj.rotor.winding = WindingUD(user_wind_mat=wind_mat,
qs=4,
p=4,
Lewout=60e-3)
test_obj.rotor.mat_type.mag = MatLamination(Wlam=0.5e-3)
test_obj.shaft = Shaft(Drsh=test_obj.rotor.Rint * 2, Lshaft=1)
test_obj.stator = LamSlotWind(
Rint=0.51,
Rext=0.8,
is_internal=False,
is_stator=True,
L1=0.9,
Nrvd=2,
Wrvd=0.05,
)
test_obj.stator.winding = WindingDW2L(qs=3, p=3)
test_obj.stator.slot = SlotW26(Zs=18,
W0=40e-3,
R1=60e-3,
H0=20e-3,
H1=40e-3)
test_obj.stator.mat_type.mag = MatLamination(Wlam=0.5e-3)
test_obj.stator.winding.Lewout = 60e-3
test_obj.frame = Frame(Rint=0.8, Rext=0.9, Lfra=1)
test_obj.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s26_1-Machine.png"))
# Rotor + Stator + 2 for frame + 1 for shaft
self.assertEqual(len(fig.axes[0].patches), 73)
test_obj.rotor.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s26_2-Rotor.png"))
# 2 for lam + 6 vent + 4*Zs for wind
self.assertEqual(len(fig.axes[0].patches), 32)
test_obj.stator.plot()
fig = plt.gcf()
fig.savefig(join(save_path, "test_Lam_Wind_s26_3-Stator.png"))
# 2 for lam + Zs*2 for wind
self.assertEqual(len(fig.axes[0].patches), 38)
def test_Lam_Mag_10_inset(self):
"""Test machine plot with Magnet 10 inset"""
plt.close("all")
test_obj = Machine()
test_obj.rotor = LamSlotMag(
Rint=40e-3,
Rext=100e-3,
is_internal=True,
is_stator=False,
L1=0.45,
Nrvd=1,
Wrvd=0.05,
)
magnet = [MagnetType10(Lmag=0.5, Hmag=0.02, Wmag=0.04)]
test_obj.rotor.slot = SlotMFlat(Zs=4, W0=0.04, H0=0.02, magnet=magnet)
test_obj.rotor.mat_type.magnetics = MatLamination(Wlam=0.5e-3)
test_obj.shaft = Shaft(Drsh=test_obj.rotor.Rint * 2, Lshaft=0.55)
test_obj.rotor.axial_vent.append(
VentilationCirc(Zh=4, Alpha0=0, D0=2.5e-3, H0=50e-3))
test_obj.rotor.axial_vent.append(
VentilationCirc(Zh=8, Alpha0=0, D0=5e-3, H0=60e-3))
test_obj.rotor.axial_vent.append(
VentilationCirc(Zh=12, Alpha0=0, D0=10e-3, H0=70e-3))
test_obj.stator = LamSlotMag(
Rint=110e-3,
Rext=200e-3,
is_internal=False,
is_stator=True,
L1=0.45,
Nrvd=1,
Wrvd=0.05,
)
magnet2 = [MagnetType10(Lmag=0.5, Hmag=0.02, Wmag=0.04)]
test_obj.stator.slot = SlotMFlat(Zs=8,
W0=0.04,
W3=2 * pi / 64,
H0=0.02,
magnet=magnet2)
test_obj.stator.mat_type.magnetics = MatLamination(Wlam=0.5e-3)
test_obj.frame = Frame(Rint=200e-3, Rext=250e-3, Lfra=0.5)
test_obj.stator.axial_vent.append(
VentilationTrap(Zh=6,
Alpha0=pi / 6,
W1=10e-3,
W2=20e-3,
D0=0.02,
H0=0.140))
test_obj.stator.axial_vent.append(
VentilationTrap(Zh=6,
Alpha0=pi / 6,
W1=20e-3,
W2=40e-3,
D0=0.02,
H0=0.170))
test_obj.plot()
fig = plt.gcf()
self.assertEqual(len(fig.axes[0].patches), 55)
fig.savefig(join(save_path, "test_Lam_Mag_10i_1-Machine.png"))
test_obj.rotor.plot()
fig = plt.gcf()
self.assertEqual(len(fig.axes[0].patches), 30)
fig.savefig(join(save_path, "test_Lam_Mag_10i_2-Rotor.png"))
test_obj.stator.plot()
fig = plt.gcf()
self.assertEqual(len(fig.axes[0].patches), 22)
fig.savefig(join(save_path, "test_Lam_Mag_10i_3-Stator.png"))