16,
xform=lambda obj, x: int(
round(x * (_ADC_DEFAULT_CALIBRATION /
(10.0 if obj.get_frontend(2)[1] else 1.0)) *
obj._adc_gains()[1] * 2.0**10))),
from_reg_signed(
0,
16,
xform=lambda obj, x: x * (
(10.0 if obj.get_frontend(2)[1] else 1.0
) / _ADC_DEFAULT_CALIBRATION) / obj._adc_gains()[1] / 2.0**10)),
'ch1_sampling_freq': (REG_SAMPLINGFREQ, to_reg_unsigned(0, 1),
from_reg_unsigned(0, 1)),
'ch2_sampling_freq': (REG_SAMPLINGFREQ, to_reg_unsigned(1, 1),
from_reg_unsigned(1, 1)),
'filter_reset': (REG_FILT_RESET, to_reg_bool(0), from_reg_bool(0)),
'input_scale1': (REG_INPUTSCALE_CH0,
to_reg_signed(0, 18, xform=lambda obj, x: x * 2.0**9),
from_reg_signed(0, 18, xform=lambda obj, x: x /
(2.0**9))),
'input_scale2': (REG_INPUTSCALE_CH1,
to_reg_signed(0, 18, xform=lambda obj, x: x * 2.0**9),
from_reg_signed(0, 18, xform=lambda obj, x: x /
(2.0**9))),
'output_scale1':
(REG_OUTPUTSCALE_CH0,
to_reg_signed(
0,
18,
xform=lambda obj, x: int(
round(x * 2.0**9 /
return monitor_source_gains[source]
def _update_dependent_regs(self, scales):
super(FIRFilter, self)._update_dependent_regs(scales)
self._update_control_matrix_regs()
self._update_gains_offsets_regs()
def _on_reg_sync(self):
super(FIRFilter, self)._on_reg_sync()
# Update local variables with device variables
self._sync_gains_offsets_regs()
self._sync_control_matrix_regs()
_fir_reg_handlers = {
'reset_ch1': (REG_FIR_CONTROL, to_reg_bool(0), from_reg_bool(0)),
'reset_ch2': (REG_FIR_CONTROL, to_reg_bool(1), from_reg_bool(1)),
'filter_en1': (REG_FIR_CONTROL, to_reg_bool(2), from_reg_bool(2)),
'filter_en2': (REG_FIR_CONTROL, to_reg_bool(3), from_reg_bool(3)),
'link': (REG_FIR_CONTROL, to_reg_bool(4), from_reg_bool(4)),
'input_en1': (REG_FIR_CONTROL, to_reg_bool(5), from_reg_bool(5)),
'input_en2': (REG_FIR_CONTROL, to_reg_bool(6), from_reg_bool(6)),
'mon1_source':
(REG_FIR_CONTROL, to_reg_unsigned(8, 3), from_reg_unsigned(8, 3)),
'mon2_source': (REG_FIR_CONTROL, to_reg_unsigned(12, 3),
from_reg_unsigned(12, 3)),
'mon1_clip': (REG_FIR_CONTROL, to_reg_bool(11), from_reg_bool(11)),
'mon2_clip': (REG_FIR_CONTROL, to_reg_bool(15), from_reg_bool(15)),
'output_en1': (REG_FIR_CONTROL, to_reg_bool(16), from_reg_bool(16)),
'output_en2': (REG_FIR_CONTROL, to_reg_bool(17), from_reg_bool(17)),
'input_scale1':
to_reg_unsigned(8,
8,
allow_set=[
_OSC_SOURCE_CH1, _OSC_SOURCE_CH2,
_OSC_SOURCE_DA1, _OSC_SOURCE_DA2,
_OSC_SOURCE_EXT
]), from_reg_unsigned(8, 8)),
'trig_ch': (REG_OSC_TRIGCTL,
to_reg_unsigned(4,
6,
allow_set=[
_OSC_SOURCE_CH1, _OSC_SOURCE_CH2,
_OSC_SOURCE_DA1, _OSC_SOURCE_DA2,
_OSC_SOURCE_EXT
]), from_reg_unsigned(4, 6)),
'hf_reject': (REG_OSC_TRIGCTL, to_reg_bool(12), from_reg_bool(12)),
'loopback_mode_ch1':
(REG_OSC_ACTL,
to_reg_unsigned(0, 1, allow_set=[_OSC_LB_CLIP,
_OSC_LB_ROUND]), from_reg_unsigned(0,
1)),
'loopback_mode_ch2':
(REG_OSC_ACTL,
to_reg_unsigned(1, 1, allow_set=[_OSC_LB_CLIP,
_OSC_LB_ROUND]), from_reg_unsigned(1,
1)),
'ain_mode': (REG_OSC_ACTL,
to_reg_unsigned(16,
2,
allow_set=[_OSC_AIN_DDS, _OSC_AIN_DECI]),
from_reg_unsigned(16, 2)),
16,
xform=lambda obj, x: x * 2**15 - 1),
from_reg_signed(16,
16,
xform=lambda obj, x: x /
(2**14 - 1))),
'cliprange_lower_ch2':
(REG_LLB_CLIP_SLOW, to_reg_signed(0,
16,
xform=lambda obj, x: x * 2**15 - 1),
from_reg_signed(0, 16, xform=lambda obj, x: x / (2**14 - 1))),
'cliprange_upper_ch2': (REG_LLB_CLIP_SLOW,
to_reg_signed(16,
16,
xform=lambda obj, x: x * 2**15 - 1),
from_reg_signed(16,
16,
xform=lambda obj, x: x /
(2**14 - 1))),
'fast_aux_enable': (REG_LLB_AUX_CTRL, to_reg_bool(1), from_reg_bool(1)),
'slow_aux_enable': (REG_LLB_AUX_CTRL, to_reg_bool(2), from_reg_bool(2)),
'fast_channel_en': (REG_LLB_ENABLES_LIGHTS, to_reg_bool(2),
from_reg_bool(2)),
'slow_channel_en': (REG_LLB_ENABLES_LIGHTS, to_reg_bool(3),
from_reg_bool(3)),
'out1_en': (REG_LLB_ENABLES_LIGHTS, to_reg_bool(4), from_reg_bool(4)),
'out2_en': (REG_LLB_ENABLES_LIGHTS, to_reg_bool(5), from_reg_bool(5)),
'input1_light': (REG_LLB_ENABLES_LIGHTS, to_reg_bool(6), from_reg_bool(6)),
'input2_light': (REG_LLB_ENABLES_LIGHTS, to_reg_bool(7), from_reg_bool(7))
}
to_reg_unsigned(0, 16, xform=lambda obj, a: a / obj._dac_gains()[0]),
from_reg_unsigned(0, 16, xform=lambda obj, a: a * obj._dac_gains()[0])),
'pm_out2_amplitude':
(REG_PM_SG_AMP,
to_reg_unsigned(16, 16, xform=lambda obj, a: a / obj._dac_gains()[1]),
from_reg_unsigned(16, 16, xform=lambda obj, a: a * obj._dac_gains()[1])),
'pm_out1_phase':
((REG_PM_SG_PHASE1_H, REG_PM_SG_PHASE1_L),
to_reg_unsigned(0, 48, xform=lambda obj, p: (p / _PM_SG_PHASESCALE)),
from_reg_unsigned(0, 48, xform=lambda obj, p: p * _PM_SG_PHASESCALE)),
'pm_out2_phase':
((REG_PM_SG_PHASE2_H, REG_PM_SG_PHASE2_L),
to_reg_unsigned(0, 48, xform=lambda obj, p: (p / _PM_SG_PHASESCALE)),
from_reg_unsigned(0, 48, xform=lambda obj, p: p * _PM_SG_PHASESCALE)),
'pm_out1_locked_out': (REG_PM_LOCKED_OUTS, to_reg_bool(0),
from_reg_bool(0)),
'pm_out2_locked_out': (REG_PM_LOCKED_OUTS, to_reg_bool(1),
from_reg_bool(1))
}
class Phasemeter(_stream_instrument.StreamBasedInstrument,
Phasemeter_WaveformGenerator):
# TODO Frame instrument may not be appropriate when we get streaming going.
""" Phasemeter instrument object.
To run a new Phasemeter instrument, this should be instantiated and
deployed via a connected :any:`Moku` object using
:any:`deploy_instrument`. Alternatively, a pre-configured instrument object
can be obtained by discovering an already running Phasemeter
instrument on a Moku:Lab device via
def commit(self):
# Restart the sweep as instrument settings are being changed
self._restart_sweep()
super(FrequencyResponseAnalyzer, self).commit()
# Update the scaling factors for processing of incoming frames
# stateid allows us to track which scales correspond to which register
# state
self.scales[self._stateid] = self._calculate_scales()
commit.__doc__ = MokuInstrument.commit.__doc__
_fra_reg_handlers = {
'loop_sweep': (REG_FRA_ENABLES, to_reg_bool(0), from_reg_bool(0)),
'single_sweep': (REG_FRA_ENABLES, to_reg_bool(1), from_reg_bool(1)),
'sweep_reset': (REG_FRA_ENABLES, to_reg_bool(2), from_reg_bool(2)),
'channel1_en': (REG_FRA_ENABLES, to_reg_bool(3), from_reg_bool(3)),
'channel2_en': (REG_FRA_ENABLES, to_reg_bool(4), from_reg_bool(4)),
'adc1_en': (REG_FRA_ENABLES, to_reg_bool(5), from_reg_bool(5)),
'adc2_en': (REG_FRA_ENABLES, to_reg_bool(6), from_reg_bool(6)),
'dac1_en': (REG_FRA_ENABLES, to_reg_bool(7), from_reg_bool(7)),
'dac2_en': (REG_FRA_ENABLES, to_reg_bool(8), from_reg_bool(8)),
'sweep_freq_min':
((REG_FRA_SWEEP_FREQ_MIN_H, REG_FRA_SWEEP_FREQ_MIN_L),
to_reg_unsigned(0, 48, xform=lambda obj, f: f * _FRA_FREQ_SCALE),
from_reg_unsigned(0, 48, xform=lambda obj, f: f / _FRA_FREQ_SCALE)),
'sweep_freq_delta':
((REG_FRA_SWEEP_FREQ_DELTA_H, REG_FRA_SWEEP_FREQ_DELTA_L),
to_reg_signed(0, 48), from_reg_signed(0, 48)),
stubbed for now.
"""
if (source == _ARB_TRIG_SRC_CH1):
level = scales['gain_adc1']
elif (source == _ARB_TRIG_SRC_CH2):
level = scales['gain_adc2']
elif (source == _ARB_TRIG_SRC_EXT):
level = 1.0
else:
level = 1.0
return level
_arb_reg_handlers = {
'enable1': (REG_ARB_SETTINGS1, to_reg_bool(0), from_reg_bool(0)),
'phase_rst1': (REG_ARB_SETTINGS1, to_reg_bool(1), from_reg_bool(1)),
'mode1': (REG_ARB_SETTINGS1,
to_reg_unsigned(2,
2,
allow_set=[
_ARB_MODE_125, _ARB_MODE_250, _ARB_MODE_500,
_ARB_MODE_1000
]), from_reg_unsigned(2, 2)),
'interpolation1': (REG_ARB_SETTINGS1, to_reg_bool(4), from_reg_bool(4)),
'trig_source1': (REG_ARB_SETTINGS1,
to_reg_unsigned(5,
5,
allow_set=[
_ARB_TRIG_SRC_CH1, _ARB_TRIG_SRC_CH2,
_ARB_TRIG_SRC_EXT
def wait_for_trig(self):
r = self.reg_base + SweepGenerator._REG_CONFIG
return self._instr._accessor_get(r, from_reg_bool(2))
def hold_last(self):
r = self.reg_base + SweepGenerator._REG_CONFIG
return self._instr._accessor_get(r, from_reg_bool(3))
else:
# If aux is set to LO or demod, set the sine amplitude as desired.
# Only ever output on Channel 2.
self.sineout_amp = (self._lo_amp if self.aux_source == 'sine' else
self._demod_amp) / self._dac_gains()[1]
@deprecated(category='method', message="Deprecated.")
def set_control_matrix(self):
# This function is merely here because LIA inherits PID which has a
# control matrix
# We need to rethink PID inheritance.
pass
_lia_reg_hdl = {
'lpf_en': (REG_LIA_ENABLES, to_reg_bool(0), from_reg_bool(0)),
'ch1_pid1_en': (REG_LIA_ENABLES, to_reg_bool(1), from_reg_bool(1)),
'ch1_pid1_ien': (REG_LIA_ENABLES, to_reg_bool(3), from_reg_bool(3)),
'ch1_pid1_pen': (REG_LIA_ENABLES, to_reg_bool(5), from_reg_bool(5)),
'ch1_out_en': (REG_LIA_ENABLES, to_reg_bool(8), from_reg_bool(8)),
'ch2_out_en': (REG_LIA_ENABLES, to_reg_bool(9), from_reg_bool(9)),
'lpf_den': (REG_LIA_ENABLES, to_reg_bool(10), from_reg_bool(10)),
'pid1_ch1_den': (REG_LIA_ENABLES, to_reg_bool(11), from_reg_bool(11)),
'ch1_pid1_bypass': (REG_LIA_ENABLES, to_reg_bool(13), from_reg_bool(13)),
'ch1_signal_en': (REG_LIA_ENABLES, to_reg_bool(14), from_reg_bool(14)),
'ch1_pid1_int_dc_pole':
(REG_LIA_ENABLES, to_reg_bool(16), from_reg_bool(16)),
'ch2_signal_en': (REG_LIA_ENABLES, to_reg_bool(17), from_reg_bool(17)),
'ext_demod': (REG_LIA_ENABLES, to_reg_bool(18), from_reg_bool(18)),
'lo_PLL': (REG_LIA_ENABLES, to_reg_bool(19), from_reg_bool(19)),
'filt_bypass1': (REG_LIA_ENABLES, to_reg_bool(21), from_reg_bool(21)),
:type en: bool
:param en: Enable the specified input channel(s).
:raises InvalidParameterException: Invalid parameters
"""
_utils.check_parameter_valid('set', ch, [1, 2, None], 'input channel')
_utils.check_parameter_valid('bool', en, desc='enable input')
if ch is None or ch == 1:
self.ch1_input_en = en
if ch is None or ch == 2:
self.ch2_input_en = en
_PID_reg_hdl = {
'ch1_pid1_bypass': (REG_PID_ENABLES, to_reg_bool(0), from_reg_bool(0)),
'ch1_pid2_bypass': (REG_PID_ENABLES, to_reg_bool(1), from_reg_bool(1)),
'ch1_pid1_int_dc_pole':
(REG_PID_ENABLES, to_reg_bool(2), from_reg_bool(2)),
'ch1_pid2_int_dc_pole':
(REG_PID_ENABLES, to_reg_bool(3), from_reg_bool(3)),
'ch2_pid1_bypass': (REG_PID_ENABLES, to_reg_bool(4), from_reg_bool(4)),
'ch2_pid2_bypass': (REG_PID_ENABLES, to_reg_bool(5), from_reg_bool(5)),
'ch2_pid1_int_dc_pole':
(REG_PID_ENABLES, to_reg_bool(6), from_reg_bool(6)),
'ch2_pid2_int_dc_pole': (REG_PID_ENABLES, to_reg_bool(7),
from_reg_bool(7)),
'ch1_pid1_en': (REG_PID_ENABLES, to_reg_bool(8), from_reg_bool(8)),
'ch1_pid2_en': (REG_PID_ENABLES, to_reg_bool(9), from_reg_bool(9)),
'ch2_pid1_en': (REG_PID_ENABLES, to_reg_bool(10), from_reg_bool(10)),
'ch2_pid2_en': (REG_PID_ENABLES, to_reg_bool(11), from_reg_bool(11)),
def ntrigger_mode(self):
r = self.reg_base + Trigger._REG_NTRIGGER
return self._instr._accessor_get(r, from_reg_bool(31))
def input_en(self):
r = self.reg_base + PID._REG_EN
return self._instr._accessor_get(r, from_reg_bool(6))
def dc_pole(self):
r = self.reg_base + PID._REG_EN
return self._instr._accessor_get(r, from_reg_bool(3))
def bypass(self):
r = self.reg_base + PID._REG_EN
return self._instr._accessor_get(r, from_reg_bool(1))
def enable(self):
r = self.reg_base + PID._REG_EN
return self._instr._accessor_get(r, from_reg_bool(0))