def test_cursor_manager(self):
self.close_was_called = False
test_case = self
class CM(CursorManager):
def __init__(self, client):
super(CM, self).__init__(client)
def close(self, cursor_id, address):
test_case.close_was_called = True
super(CM, self).close(cursor_id, address)
with client_knobs(kill_cursor_frequency=0.01):
client = rs_or_single_client(maxPoolSize=1)
client.set_cursor_manager(CM)
# Create a cursor on the same client so we're certain the getMore
# is sent after the killCursors message.
cursor = client.pymongo_test.test.find().batch_size(1)
next(cursor)
client.close_cursor(
cursor.cursor_id,
_CursorAddress(self.client.address, self.collection.full_name))
def raises_cursor_not_found():
try:
next(cursor)
return False
except CursorNotFound:
return True
wait_until(raises_cursor_not_found, 'close cursor')
self.assertTrue(self.close_was_called)
def __die(self):
"""Closes this cursor.
"""
if self.__id and not self.__killed:
self.__collection.database.client.close_cursor(
self.__id, _CursorAddress(self.__address, self.__ns))
self.__killed = True
def __die(self, synchronous=False):
"""Closes this cursor.
"""
try:
already_killed = self.__killed
except AttributeError:
# __init__ did not run to completion (or at all).
return
self.__killed = True
if self.__id and not already_killed:
if self.__exhaust and self.__exhaust_mgr:
# If this is an exhaust cursor and we haven't completely
# exhausted the result set we *must* close the socket
# to stop the server from sending more data.
self.__exhaust_mgr.sock.close_socket(
ConnectionClosedReason.ERROR)
else:
address = _CursorAddress(self.__address,
self.__collection.full_name)
if synchronous:
self.__collection.database.client._close_cursor_now(
self.__id, address, session=self.__session)
else:
# The cursor will be closed later in a different session.
self.__collection.database.client._close_cursor(
self.__id, address)
if self.__exhaust and self.__exhaust_mgr:
self.__exhaust_mgr.close()
if self.__session and not self.__explicit_session:
self.__session._end_session(lock=synchronous)
self.__session = None
def __die(self, synchronous=False):
"""Closes this cursor."""
try:
already_killed = self.__killed
except AttributeError:
# __init__ did not run to completion (or at all).
return
self.__killed = True
if self.__id and not already_killed:
cursor_id = self.__id
address = _CursorAddress(
self.__address, "%s.%s" % (self.__dbname, self.__collname))
else:
# Skip killCursors.
cursor_id = 0
address = None
self.__collection.database.client._cleanup_cursor(
synchronous,
cursor_id,
address,
self.__sock_mgr,
self.__session,
self.__explicit_session,
)
if not self.__explicit_session:
self.__session = None
self.__sock_mgr = None
def __die(self, synchronous=False):
"""Closes this cursor.
"""
if self.__id and not self.__killed:
if self.__exhaust and self.__exhaust_mgr:
# If this is an exhaust cursor and we haven't completely
# exhausted the result set we *must* close the socket
# to stop the server from sending more data.
self.__exhaust_mgr.sock.close()
else:
address = _CursorAddress(self.__address,
self.__collection.full_name)
if synchronous:
self.__collection.database.client._close_cursor_now(
self.__id, address, session=self.__session)
else:
# The cursor will be closed later in a different session.
self.__collection.database.client.close_cursor(
self.__id, address)
if self.__exhaust and self.__exhaust_mgr:
self.__exhaust_mgr.close()
self.__killed = True
if self.__session and not self.__explicit_session:
self.__session._end_session(lock=synchronous)
self.__session = None
def test_survive_cursor_not_found(self):
# By default the find command returns 101 documents in the first batch.
# Use 102 batches to cause a single getMore.
chunk_size = 1024
data = b'd' * (102 * chunk_size)
listener = EventListener()
client = rs_or_single_client(event_listeners=[listener])
db = client.pymongo_test
with GridIn(db.fs, chunk_size=chunk_size) as infile:
infile.write(data)
with GridOut(db.fs, infile._id) as outfile:
self.assertEqual(len(outfile.readchunk()), chunk_size)
# Kill the cursor to simulate the cursor timing out on the server
# when an application spends a long time between two calls to
# readchunk().
client._close_cursor_now(
outfile._GridOut__chunk_iter._cursor.cursor_id,
_CursorAddress(client.address, db.fs.chunks.full_name))
# Read the rest of the file without error.
self.assertEqual(len(outfile.read()), len(data) - chunk_size)
# Paranoid, ensure that a getMore was actually sent.
self.assertIn("getMore", listener.started_command_names())
def test_kill_cursors_with_cursoraddress(self):
if (client_context.is_mongos
and not client_context.version.at_least(2, 4, 7)):
# Old mongos sends incorrectly formatted error response when
# cursor isn't found, see SERVER-9738.
raise SkipTest("Can't test kill_cursors against old mongos")
self.collection = self.client.pymongo_test.test
self.collection.drop()
self.collection.insert_many([{'_id': i} for i in range(200)])
cursor = self.collection.find().batch_size(1)
next(cursor)
self.client.kill_cursors(
[cursor.cursor_id],
_CursorAddress(self.client.address, self.collection.full_name))
# Prevent killcursors from reaching the server while a getmore is in
# progress -- the server logs "Assertion: 16089:Cannot kill active
# cursor."
time.sleep(2)
def raises_cursor_not_found():
try:
next(cursor)
return False
except CursorNotFound:
return True
wait_until(raises_cursor_not_found, 'close cursor')
def test_survive_cursor_not_found(self):
# By default the find command returns 101 documents in the first batch.
# Use 102 batches to cause a single getMore.
chunk_size = 1024
data = b'd' * (102 * chunk_size)
listener = EventListener()
client = rs_or_single_client(event_listeners=[listener])
db = client.pymongo_test
with GridIn(db.fs, chunk_size=chunk_size) as infile:
infile.write(data)
with GridOut(db.fs, infile._id) as outfile:
self.assertEqual(len(outfile.readchunk()), chunk_size)
# Kill the cursor to simulate the cursor timing out on the server
# when an application spends a long time between two calls to
# readchunk().
client._close_cursor_now(
outfile._GridOut__chunk_iter._cursor.cursor_id,
_CursorAddress(client.address, db.fs.chunks.full_name))
# Read the rest of the file without error.
self.assertEqual(len(outfile.read()), len(data) - chunk_size)
# Paranoid, ensure that a getMore was actually sent.
self.assertIn("getMore", listener.started_command_names())
def __die(self, synchronous=False):
"""Closes this cursor.
"""
already_killed = self.__killed
self.__killed = True
if self.__id and not already_killed:
if self.__exhaust and self.__exhaust_mgr:
# If this is an exhaust cursor and we haven't completely
# exhausted the result set we *must* close the socket
# to stop the server from sending more data.
self.__exhaust_mgr.sock.close()
else:
address = _CursorAddress(
self.__address, self.__collection.full_name)
if synchronous:
self.__collection.database.client._close_cursor_now(
self.__id, address, session=self.__session)
else:
# The cursor will be closed later in a different session.
self.__collection.database.client.close_cursor(
self.__id, address)
if self.__exhaust and self.__exhaust_mgr:
self.__exhaust_mgr.close()
if self.__session and not self.__explicit_session:
self.__session._end_session(lock=synchronous)
self.__session = None
def test_kill_cursors_with_cursoraddress(self):
if (client_context.is_mongos
and not client_context.version.at_least(2, 4, 7)):
# Old mongos sends incorrectly formatted error response when
# cursor isn't found, see SERVER-9738.
raise SkipTest("Can't test kill_cursors against old mongos")
coll = self.client.pymongo_test.test
coll.drop()
coll.insert_many([{'_id': i} for i in range(200)])
cursor = coll.find().batch_size(1)
next(cursor)
self.client.kill_cursors([cursor.cursor_id],
_CursorAddress(self.client.address,
coll.full_name))
# Prevent killcursors from reaching the server while a getmore is in
# progress -- the server logs "Assertion: 16089:Cannot kill active
# cursor."
time.sleep(2)
def raises_cursor_not_found():
try:
next(cursor)
return False
except CursorNotFound:
return True
wait_until(raises_cursor_not_found, 'close cursor')
def test_resume_on_error(self):
"""ChangeStream will automatically resume one time on a resumable
error (including not master) with the initial pipeline and options,
except for the addition/update of a resumeToken.
"""
with self.coll.watch([]) as change_stream:
self.insert_and_check(change_stream, {'_id': 1})
# Cause a cursor not found error on the next getMore.
cursor = change_stream._cursor
address = _CursorAddress(cursor.address, self.coll.full_name)
self.client._close_cursor_now(cursor.cursor_id, address)
self.insert_and_check(change_stream, {'_id': 2})
def test_resume_on_error(self):
"""ChangeStream will automatically resume one time on a resumable
error (including not master) with the initial pipeline and options,
except for the addition/update of a resumeToken.
"""
with self.coll.watch([]) as change_stream:
self.insert_and_check(change_stream, {'_id': 1})
# Cause a cursor not found error on the next getMore.
cursor = change_stream._cursor
address = _CursorAddress(cursor.address, self.coll.full_name)
self.client._close_cursor_now(cursor.cursor_id, address)
self.insert_and_check(change_stream, {'_id': 2})
def __die(self, synchronous=False):
"""Closes this cursor.
"""
if self.__id and not self.__killed:
address = _CursorAddress(self.__address,
self.__collection.full_name)
if synchronous:
self.__collection.database.client._close_cursor_now(
self.__id, address)
else:
self.__collection.database.client.close_cursor(
self.__id, address)
self.__killed = True
def test_kill_cursors(self):
"""The killCursors command sent during the resume process must not be
allowed to raise an exception.
"""
def raise_error():
raise ServerSelectionTimeoutError('mock error')
with self.coll.watch([]) as change_stream:
self.insert_and_check(change_stream, {'_id': 1})
# Cause a cursor not found error on the next getMore.
cursor = change_stream._cursor
address = _CursorAddress(cursor.address, self.coll.full_name)
self.client._close_cursor_now(cursor.cursor_id, address)
cursor.close = raise_error
self.insert_and_check(change_stream, {'_id': 2})
def test_kill_cursors(self):
"""The killCursors command sent during the resume process must not be
allowed to raise an exception.
"""
def raise_error():
raise ServerSelectionTimeoutError('mock error')
with self.coll.watch([]) as change_stream:
self.insert_and_check(change_stream, {'_id': 1})
# Cause a cursor not found error on the next getMore.
cursor = change_stream._cursor
address = _CursorAddress(cursor.address, self.coll.full_name)
self.client._close_cursor_now(cursor.cursor_id, address)
cursor.close = raise_error
self.insert_and_check(change_stream, {'_id': 2})
def __die(self, synchronous=False):
"""Closes this cursor.
"""
if self.__id and not self.__killed:
address = _CursorAddress(self.__address,
self.__collection.full_name)
if synchronous:
self.__collection.database.client._close_cursor_now(
self.__id, address, session=self.__session)
else:
# The cursor will be closed later in a different session.
self.__collection.database.client.close_cursor(
self.__id, address)
self.__killed = True
self.__end_session(synchronous)
def __die(self, synchronous=False):
"""Closes this cursor.
"""
already_killed = self.__killed
self.__killed = True
if self.__id and not already_killed:
address = _CursorAddress(
self.__address, self.__collection.full_name)
if synchronous:
self.__collection.database.client._close_cursor_now(
self.__id, address, session=self.__session)
else:
# The cursor will be closed later in a different session.
self.__collection.database.client._close_cursor(
self.__id, address)
self.__end_session(synchronous)
def __die(self):
"""Closes this cursor.
"""
if self.__id and not self.__killed:
if self.__exhaust and self.__exhaust_mgr:
# If this is an exhaust cursor and we haven't completely
# exhausted the result set we *must* close the socket
# to stop the server from sending more data.
self.__exhaust_mgr.sock.close()
else:
self.__collection.database.client.close_cursor(
self.__id,
_CursorAddress(
self.__address, self.__collection.full_name))
if self.__exhaust and self.__exhaust_mgr:
self.__exhaust_mgr.close()
self.__killed = True
def __die(self):
"""Closes this cursor.
"""
if self.__id and not self.__killed:
if self.__exhaust and self.__exhaust_mgr:
# If this is an exhaust cursor and we haven't completely
# exhausted the result set we *must* close the socket
# to stop the server from sending more data.
self.__exhaust_mgr.sock.close()
else:
self.__collection.database.client.close_cursor(
self.__id,
_CursorAddress(self.__address,
self.__collection.full_name))
if self.__exhaust and self.__exhaust_mgr:
self.__exhaust_mgr.close()
self.__killed = True
def __die(self, synchronous=False):
"""Closes this cursor.
"""
already_killed = self.__killed
self.__killed = True
if self.__id and not already_killed:
cursor_id = self.__id
address = _CursorAddress(self.__address, self.__ns)
else:
# Skip killCursors.
cursor_id = 0
address = None
self.__collection.database.client._cleanup_cursor(
synchronous, cursor_id, address, self.__sock_mgr, self.__session,
self.__explicit_session)
if not self.__explicit_session:
self.__session = None
self.__sock_mgr = None
def test_cursor_manager(self):
if (client_context.is_mongos
and not client_context.version.at_least(2, 4, 7)):
# Old mongos sends incorrectly formatted error response when
# cursor isn't found, see SERVER-9738.
raise SkipTest("Can't test kill_cursors against old mongos")
self.close_was_called = False
test_case = self
class CM(CursorManager):
def __init__(self, client):
super(CM, self).__init__(client)
def close(self, cursor_id, address):
test_case.close_was_called = True
super(CM, self).close(cursor_id, address)
with client_knobs(kill_cursor_frequency=0.01):
client = rs_or_single_client(maxPoolSize=1)
client.set_cursor_manager(CM)
# Create a cursor on the same client so we're certain the getMore
# is sent after the killCursors message.
cursor = client.pymongo_test.test.find().batch_size(1)
next(cursor)
client.close_cursor(
cursor.cursor_id,
_CursorAddress(self.client.address, self.collection.full_name))
def raises_cursor_not_found():
try:
next(cursor)
return False
except CursorNotFound:
return True
wait_until(raises_cursor_not_found, 'close cursor')
self.assertTrue(self.close_was_called)
def kill_change_stream_cursor(self, change_stream):
# Cause a cursor not found error on the next getMore.
cursor = change_stream._cursor
address = _CursorAddress(cursor.address, cursor._CommandCursor__ns)
client = self.watched_collection().database.client
client._close_cursor_now(cursor.cursor_id, address)
def kill_change_stream_cursor(self, change_stream):
# Cause a cursor not found error on the next getMore.
cursor = change_stream._cursor
address = _CursorAddress(cursor.address, cursor._CommandCursor__ns)
client = self.input_target.database.client
client._close_cursor_now(cursor.cursor_id, address)
