async def send_snmp_request(self, host, target):
response = await getCmd(
self.snmpEngine,
CommunityData(self.community_string, mpModel=1),
UdpTransportTarget((host, 161)),
ContextData(),
target,
)
error_indication, error_status, error_index, varbinds = response
if error_indication:
logger.warning('%s with this asset: %s', error_indication, host)
return
elif error_status:
logger.warning(
'%s at %s',
error_status.prettyPrint(),
)
return
else:
return varbinds[0]
async def async_setup_platform(opp,
config,
async_add_entities,
discovery_info=None):
"""Set up the SNMP sensor."""
name = config.get(CONF_NAME)
host = config.get(CONF_HOST)
port = config.get(CONF_PORT)
community = config.get(CONF_COMMUNITY)
baseoid = config.get(CONF_BASEOID)
unit = config.get(CONF_UNIT_OF_MEASUREMENT)
version = config.get(CONF_VERSION)
username = config.get(CONF_USERNAME)
authkey = config.get(CONF_AUTH_KEY)
authproto = config.get(CONF_AUTH_PROTOCOL)
privkey = config.get(CONF_PRIV_KEY)
privproto = config.get(CONF_PRIV_PROTOCOL)
accept_errors = config.get(CONF_ACCEPT_ERRORS)
default_value = config.get(CONF_DEFAULT_VALUE)
value_template = config.get(CONF_VALUE_TEMPLATE)
if value_template is not None:
value_template.opp = opp
if version == "3":
if not authkey:
authproto = "none"
if not privkey:
privproto = "none"
request_args = [
SnmpEngine(),
UsmUserData(
username,
authKey=authkey or None,
privKey=privkey or None,
authProtocol=getattr(hlapi, MAP_AUTH_PROTOCOLS[authproto]),
privProtocol=getattr(hlapi, MAP_PRIV_PROTOCOLS[privproto]),
),
UdpTransportTarget((host, port)),
ContextData(),
]
else:
request_args = [
SnmpEngine(),
CommunityData(community, mpModel=SNMP_VERSIONS[version]),
UdpTransportTarget((host, port)),
ContextData(),
]
errindication, _, _, _ = await getCmd(*request_args,
ObjectType(ObjectIdentity(baseoid)))
if errindication and not accept_errors:
_LOGGER.error("Please check the details in the configuration file")
return
data = SnmpData(request_args, baseoid, accept_errors, default_value)
async_add_entities([SnmpSensor(data, name, unit, value_template)], True)
async def get_one(snmp_engine, host, community_string, objects):
objs = [ObjectType(ObjectIdentity(obj_id)) for obj_id in objects.keys()]
errorIndication, errorStatus, errorIndex, varBinds = await getCmd(
snmp_engine,
CommunityData(community_string),
UdpTransportTarget(host, timeout=1.0, retries=4),
ContextData(),
*objs,
)
if errorIndication:
logging.error(host, errorIndication)
return
elif errorStatus:
logging.error(host, '{} at {}'.format(errorStatus.prettyPrint(),
errorIndex))
return
else:
ret = []
ts = metricq.Timestamp.now()
assert (len(varBinds) == len(objects))
for bindName, val in varBinds:
obj_id = ".{}".format(bindName) # add "." in front
try:
metric_name, multi, interval = objects[obj_id]
ret.append((metric_name, ts, float(val) * multi))
except Exception as e:
logging.error(host,
"Invalid result: {} = {}".format(bindName, val))
return []
return ret
def run_watt(pdu_ip, pdu_node_port):
snmpEngine = SnmpEngine()
errorIndication, errorStatus, errorIndex, varBinds = yield from getCmd(
snmpEngine, CommunityData('public', mpModel=1),
UdpTransportTarget((pdu_ip, 161)), ContextData(),
ObjectType(
ObjectIdentity('1.3.6.1.4.1.318.1.1.26.9.4.3.1.7.' +
str(pdu_node_port))),
ObjectType(ObjectIdentity('1.3.6.1.4.1.318.2.1.6.1.0')),
ObjectType(ObjectIdentity('1.3.6.1.4.1.318.2.1.6.2.0')))
watt = None
timestamp = None
if errorIndication:
LOGGER.error(errorIndication)
elif errorStatus:
LOGGER.error('%s at %s' %
(errorStatus.prettyPrint(),
errorIndex and varBinds[int(errorIndex) - 1][0] or '?'))
else:
watt = int(varBinds[0][1])
timestamp_str = str(varBinds[1][1]) + " " + str(varBinds[2][1])
timestamp = int(
time.mktime(
datetime.datetime.strptime(timestamp_str,
"%m/%d/%Y %H:%M:%S").timetuple()))
snmpEngine.transportDispatcher.closeDispatcher()
return watt, timestamp
def __init__(
self,
name,
host,
port,
community,
baseoid,
commandoid,
version,
username,
authkey,
authproto,
privkey,
privproto,
payload_on,
payload_off,
command_payload_on,
command_payload_off,
):
"""Initialize the switch."""
self._name = name
self._baseoid = baseoid
# Set the command OID to the base OID if command OID is unset
self._commandoid = commandoid or baseoid
self._command_payload_on = command_payload_on or payload_on
self._command_payload_off = command_payload_off or payload_off
self._state = None
self._payload_on = payload_on
self._payload_off = payload_off
if version == "3":
if not authkey:
authproto = "none"
if not privkey:
privproto = "none"
self._request_args = [
SnmpEngine(),
UsmUserData(
username,
authKey=authkey or None,
privKey=privkey or None,
authProtocol=getattr(hlapi, MAP_AUTH_PROTOCOLS[authproto]),
privProtocol=getattr(hlapi, MAP_PRIV_PROTOCOLS[privproto]),
),
UdpTransportTarget((host, port)),
ContextData(),
]
else:
self._request_args = [
SnmpEngine(),
CommunityData(community, mpModel=SNMP_VERSIONS[version]),
UdpTransportTarget((host, port)),
ContextData(),
]
async def async_setup_platform(
hass: HomeAssistant,
config: ConfigType,
async_add_entities: AddEntitiesCallback,
discovery_info: DiscoveryInfoType | None = None,
) -> None:
"""Set up the SNMP sensor."""
host = config.get(CONF_HOST)
port = config.get(CONF_PORT)
community = config.get(CONF_COMMUNITY)
baseoid = config.get(CONF_BASEOID)
version = config[CONF_VERSION]
username = config.get(CONF_USERNAME)
authkey = config.get(CONF_AUTH_KEY)
authproto = config[CONF_AUTH_PROTOCOL]
privkey = config.get(CONF_PRIV_KEY)
privproto = config[CONF_PRIV_PROTOCOL]
accept_errors = config.get(CONF_ACCEPT_ERRORS)
default_value = config.get(CONF_DEFAULT_VALUE)
unique_id = config.get(CONF_UNIQUE_ID)
if version == "3":
if not authkey:
authproto = "none"
if not privkey:
privproto = "none"
request_args = [
SnmpEngine(),
UsmUserData(
username,
authKey=authkey or None,
privKey=privkey or None,
authProtocol=getattr(hlapi, MAP_AUTH_PROTOCOLS[authproto]),
privProtocol=getattr(hlapi, MAP_PRIV_PROTOCOLS[privproto]),
),
UdpTransportTarget((host, port), timeout=DEFAULT_TIMEOUT),
ContextData(),
]
else:
request_args = [
SnmpEngine(),
CommunityData(community, mpModel=SNMP_VERSIONS[version]),
UdpTransportTarget((host, port), timeout=DEFAULT_TIMEOUT),
ContextData(),
]
errindication, _, _, _ = await getCmd(
*request_args, ObjectType(ObjectIdentity(baseoid))
)
if errindication and not accept_errors:
_LOGGER.error("Please check the details in the configuration file")
return
data = SnmpData(request_args, baseoid, accept_errors, default_value)
async_add_entities([SnmpSensor(hass, data, config, unique_id)], True)
async def async_next_snmp_request(snmpEngine,host, oids, sleep_time, comment,queue):
"""Walk SNMP oids asynchronously."""
def g_tick(): # for 1 sec periodic interval
t = time.time()
count = 0
while True:
count += 1
yield max(t + count * sleep_time - time.time(), 0)
g = g_tick()
def is_number(num): # This is to check if 'num' is number or str. If 'num' is number, i will return True
try:
float(num) # Type-casting the string to `float`.
# If string is not a valid `float`,
# it'll raise `ValueError` exception
except :
return False
return True
N = 1
while (N == 1):
print('periodic main', time.time())
try :
response = await getCmd(
snmpEngine,
CommunityData('public', mpModel=0),
UdpTransportTarget((host, 161), timeout=1,retries=0),
ContextData(),
ObjectType(ObjectIdentity(oids))
)
await asyncio.sleep(next(g))
error_indication, error_status, error_index, var_binds = response
if error_indication or error_status or error_index :
print("Error occured")
queue.put(0)
else:
for name, val in var_binds:
print('%s = %s' % (name, val))
if is_number(val):
queue.put(val)
else :
N = 0 #This is to get out while loop, so that finish this task.
except :
N = 0 #When exeption occurs, this is to get out while loop, so that finish this task.
