def generate(self, system, rom, playersControllers):
if not system.config['configfile']:
# Write emu.cfg to map joysticks, init with the default emu.cfg
Config = ConfigParser.ConfigParser()
Config.optionxform = str
Config.read(recalboxFiles.reicastConfigInit)
section = "input"
# For each pad detected
for index in playersControllers:
controller = playersControllers[index]
# Get the event number
eventNum = controller.dev.replace('/dev/input/event', '')
# Write its mapping file
controllerConfigFile = reicastControllers.generateControllerConfig(
controller)
# set the evdev_device_id_X
Config.set(section, 'evdev_device_id_' + controller.player,
eventNum)
# Set the evdev_mapping_X
Config.set(section, 'evdev_mapping_' + controller.player,
controllerConfigFile)
# number of players
Config.set("players", 'nb', len(playersControllers))
# internal config
# vmuA1
if not isfile(recalboxFiles.reicastVMUA1):
if not isdir(dirname(recalboxFiles.reicastVMUA1)):
os.mkdir(dirname(recalboxFiles.reicastVMUA1))
copyfile(recalboxFiles.reicastVMUBlank,
recalboxFiles.reicastVMUA1)
# vmuA2
if not isfile(recalboxFiles.reicastVMUA2):
if not isdir(dirname(recalboxFiles.reicastVMUA2)):
os.mkdir(dirname(recalboxFiles.reicastVMUA2))
copyfile(recalboxFiles.reicastVMUBlank,
recalboxFiles.reicastVMUA2)
cfgfile = open(recalboxFiles.reicastConfig, 'w+')
Config.write(cfgfile)
cfgfile.close()
# the command to run
commandArray = [recalboxFiles.recalboxBins[system.config['emulator']]]
if 'args' in system.config and system.config['args'] is not None:
commandArray.extend(system.config['args'])
commandArray.append(rom)
# Here is the trick to make reicast find files :
# emu.cfg is in $XDG_CONFIG_DIRS or $XDG_CONFIG_HOME. The latter is better
# VMU will be in $XDG_DATA_HOME because it needs rw access -> /recalbox/share/saves/dreamcast
# BIOS will be in $XDG_DATA_DIRS
# controller cfg files are set with an absolute path, so no worry
return Command.Command(videomode=system.config['videomode'],
array=commandArray,
env={
"XDG_CONFIG_HOME": recalboxFiles.CONF,
"XDG_DATA_HOME": recalboxFiles.reicastSaves,
"XDG_DATA_DIRS": recalboxFiles.reicastBios
})
def generate(self, system, rom, playersControllers, gameResolution):
if not system.config['configfile']:
# Write emu.cfg to map joysticks, init with the default emu.cfg
Config = ConfigParser.ConfigParser()
Config.optionxform = str
Config.read(recalboxFiles.reicastConfigInit)
section = "input"
# For each pad detected
for index in playersControllers:
controller = playersControllers[index]
# Get the event number
eventNum = controller.dev.replace('/dev/input/event', '')
# Write its mapping file
controllerConfigFile = reicastControllers.generateControllerConfig(
controller)
# set the evdev_device_id_X
Config.set(section, 'evdev_device_id_' + controller.player,
eventNum)
# Set the evdev_mapping_X
Config.set(section, 'evdev_mapping_' + controller.player,
controllerConfigFile)
# number of players
Config.set("players", 'nb', len(playersControllers))
# wide screen mode
if system.config["ratio"] == "16/9":
Config.set("config", "rend.WideScreen", "1")
# seems buggy + works only in 60hz on my side, so don't apply it automatically
#elif system.config["ratio"] == "auto" and gameResolution["width"] / float(gameResolution["height"]) >= (16.0 / 9.0) - 0.1: # let a marge
# Config.set("config", "WideScreen", "1")
else:
Config.set("config", "rend.WideScreen", "0")
# internal config
# vmuA1
if not isfile(recalboxFiles.reicastVMUA1):
if not isdir(dirname(recalboxFiles.reicastVMUA1)):
os.mkdir(dirname(recalboxFiles.reicastVMUA1))
copyfile(recalboxFiles.reicastVMUBlank,
recalboxFiles.reicastVMUA1)
# vmuA2
if not isfile(recalboxFiles.reicastVMUA2):
if not isdir(dirname(recalboxFiles.reicastVMUA2)):
os.mkdir(dirname(recalboxFiles.reicastVMUA2))
copyfile(recalboxFiles.reicastVMUBlank,
recalboxFiles.reicastVMUA2)
cfgfile = open(recalboxFiles.reicastConfig, 'w+')
Config.write(cfgfile)
cfgfile.close()
# the command to run
commandArray = [recalboxFiles.recalboxBins[system.config['emulator']]]
if 'args' in system.config and system.config['args'] is not None:
commandArray.extend(system.config['args'])
commandArray.append(rom)
# Here is the trick to make reicast find files :
# emu.cfg is in $XDG_CONFIG_DIRS or $XDG_CONFIG_HOME. The latter is better
# VMU will be in $XDG_DATA_HOME because it needs rw access -> /recalbox/share/saves/dreamcast
# BIOS will be in $XDG_DATA_DIRS
# controller cfg files are set with an absolute path, so no worry
return Command.Command(array=commandArray,
env={
"XDG_CONFIG_HOME": recalboxFiles.CONF,
"XDG_DATA_HOME": recalboxFiles.reicastSaves,
"XDG_DATA_DIRS": recalboxFiles.reicastBios
})
def generate(self, system, rom, playersControllers, gameResolution):
# Write emu.cfg to map joysticks, init with the default emu.cfg
Config = ConfigParser.ConfigParser()
Config.optionxform = str
if os.path.exists(batoceraFiles.reicastConfig):
try:
Config.read(batoceraFiles.reicastConfig)
except:
pass # give up the file
if not Config.has_section("input"):
Config.add_section("input")
# For each pad detected
for index in range(len(playersControllers), 4):
Config.set("input", 'evdev_device_id_' + str(index + 1), -1)
Config.set("input", 'evdev_mapping_' + str(index + 1), "")
for index in playersControllers:
controller = playersControllers[index]
# Get the event number
eventNum = controller.dev.replace('/dev/input/event', '')
# Write its mapping file
controllerConfigFile = reicastControllers.generateControllerConfig(
controller)
# set the evdev_device_id_X
Config.set("input", 'evdev_device_id_' + controller.player,
eventNum)
# Set the evdev_mapping_X
Config.set("input", 'evdev_mapping_' + controller.player,
controllerConfigFile)
if not Config.has_section("players"):
Config.add_section("players")
# number of players
Config.set("players", 'nb', len(playersControllers))
if not Config.has_section("config"):
Config.add_section("config")
# wide screen mode
if system.config["ratio"] == "16/9":
Config.set("config", "rend.WideScreen", "1")
# seems buggy + works only in 60hz on my side, so don't apply it automatically
#elif system.config["ratio"] == "auto" and gameResolution["width"] / float(gameResolution["height"]) >= (16.0 / 9.0) - 0.1: # let a marge
# Config.set("config", "WideScreen", "1")
else:
Config.set("config", "rend.WideScreen", "0")
# custom : allow the user to configure directly emu.cfg via batocera.conf via lines like : dreamcast.reicast.section.option=value
for user_config in system.config:
if user_config[:8] == "reicast.":
section_option = user_config[8:]
section_option_splitter = section_option.find(".")
custom_section = section_option[:section_option_splitter]
custom_option = section_option[section_option_splitter + 1:]
if not Config.has_section(custom_section):
Config.add_section(custom_section)
Config.set(custom_section, custom_option,
system.config[user_config])
### update the configuration file
if not os.path.exists(os.path.dirname(batoceraFiles.reicastConfig)):
os.makedirs(os.path.dirname(batoceraFiles.reicastConfig))
with open(batoceraFiles.reicastConfig, 'w+') as cfgfile:
Config.write(cfgfile)
cfgfile.close()
# internal config
# vmuA1
if not isfile(batoceraFiles.reicastVMUA1):
if not isdir(dirname(batoceraFiles.reicastVMUA1)):
os.mkdir(dirname(batoceraFiles.reicastVMUA1))
copyfile(batoceraFiles.reicastVMUBlank, batoceraFiles.reicastVMUA1)
# vmuA2
if not isfile(batoceraFiles.reicastVMUA2):
if not isdir(dirname(batoceraFiles.reicastVMUA2)):
os.mkdir(dirname(batoceraFiles.reicastVMUA2))
copyfile(batoceraFiles.reicastVMUBlank, batoceraFiles.reicastVMUA2)
# the command to run
commandArray = [batoceraFiles.batoceraBins[system.config['emulator']]]
commandArray.append(rom)
# Here is the trick to make reicast find files :
# emu.cfg is in $XDG_CONFIG_DIRS or $XDG_CONFIG_HOME. The latter is better
# VMU will be in $XDG_DATA_HOME because it needs rw access -> /userdata/saves/dreamcast
# BIOS will be in $XDG_DATA_DIRS
# controller cfg files are set with an absolute path, so no worry
return Command.Command(array=commandArray,
env={
"XDG_CONFIG_HOME": batoceraFiles.CONF,
"XDG_DATA_HOME": batoceraFiles.reicastSaves,
"XDG_DATA_DIRS": batoceraFiles.reicastBios
})
