class VST(object):
""" Rohde & Schwarz Vector Signal Transceiver Object """
def __init__(self):
self.Freq = 19e9
self.SMW = ''
self.FSW = ''
def jav_Open(self,SMW_IP,FSW_IP,OFile=''):
self.SMW = VSG().jav_Open(SMW_IP,OFile) #Create SMW Object
self.FSW = VSA().jav_Open(FSW_IP,OFile) #Create FSW Object
return self
def jav_OpenTest(self,SMW_IP,FSW_IP):
self.SMW = VSG().jav_OpenTest(SMW_IP) #Create SMW Object
self.FSW = VSA().jav_OpenTest(FSW_IP) #Create FSW Object
return self
def jav_Close(self):
self.SMW.jav_Close()
self.FSW.jav_Close()
def jav_ClrErr(self):
self.SMW.jav_ClrErr()
self.FSW.jav_ClrErr()
def Set_Freq(self,freq):
self.SMW.Set_Freq(freq)
self.FSW.Set_Freq(freq)
class TestGeneral(unittest.TestCase):
def setUp(self): #run before each test
self.SMW = VSG()
try:
self.SMW.jav_Open(host, prnt=0)
self.SMW.jav_Reset()
self.SMW.jav_ClrErr()
self.SMW.dLastErr = ""
except:
self.assertTrue(1)
def tearDown(self): #Run after each test
self.SMW.jav_Close()
###############################################################################
### <Test>
###############################################################################
def test_SMW_Connect(self):
self.SMW.jav_IDN(prnt=0)
self.assertEqual(self.SMW.Make, "Rohde&Schwarz")
def test_SMW_Freq(self):
frq = 1e6
self.SMW.Set_Freq(frq)
rdFrq = self.SMW.Get_Freq()
self.assertEqual(self.SMW.jav_Error()[0], '0')
self.assertEqual(frq, rdFrq)
def test_SMW_Pwr(self):
pwr = -10
self.SMW.Set_RFPwr(pwr)
rdPwr = self.SMW.Get_PowerRMS()
self.assertEqual(self.SMW.jav_Error()[0], '0')
self.assertEqual(pwr, rdPwr)
return degree
def deg2rad(degree):
radian = degree * 3.14159 / 180
return radian
###############################################################################
### Code Start
###############################################################################
OFile.write('DemodBW,Phase,Mkr1,Mkr2,Mkr3,Mkr4,Meas,MeasAvg\n')
FSW.write('SYST:DISP:UPD ON')
###############################################################################
### SMW-Setup 1 Radian = 180/Pi()
###############################################################################
SMW.Set_Freq(28e9)
SMW.Set_BBState(0) # Arb Off
SMW.Set_IQMod(0) # IQ Mod Off
SMW.Set_Ref_Source('EXT') # ExtReference
SMW.Set_Ref_Freq('10MHZ')
SMW.Set_Ref_SyncBW('WIDE') # Oscilator locking BW
SMW.Set_RFState('ON')
###############################################################################
### FSW-Analog Demodulation
###############################################################################
FSW.Set_Channel('ADEM')
FSW.write('LAY:REPL:WIND "1","XTIM:PM"') # PM Demod window
FSW.Set_SweepCont('OFF') # Single sweep
FSW.Set_Ref_Source('INT') # Reference
SMW = VSG().jav_Open(SMW_IP, OFile)
FSWP = PNA().jav_Open(FSWP_IP, OFile)
##########################################################
### Measure Time
##########################################################
Header = 'Iter,SetFreq,SMFPwr,FSWPFreq,FSWPPwr,LockStatus,PN1,PN2,PN3,PN4'
OFile.write(Header)
FSWP.Set_SweepCont(0)
SMW.Set_RFPwr(-50)
SMW.Set_RFState(1)
for i in range(numMeas): #Loop: Measurements
for freq in FreqArry: #Loop: Frequency
SMW.Set_Freq(freq)
# FSWP.Set_Freq(freq)
lockHist = []
lockPerf = [2,0,0,0]
for pwr in pwrArry: #Loop: Power
SMW.Set_RFPwr(pwr)
FSWP.Set_InitImm()
FSWP.Set_InitImm()
# SMW.delay(2)
lock = FSWP.Get_FreqLock()
mkr = []
for m in range(1,5):
mkr.append(FSWP.Get_Mkr_Y(m))
# mkr[m-1] = FSWP.Get_Mkr_Y(m)
ffrq = FSWP.Get_Freq()
fpwr = FSWP.Get_Power()
###############################################################################
### Rohde & Schwarz Automation for demonstration use.
###############################################################################
SMW_IP = '192.168.1.114'
SMW_IP = '10.0.0.10'
FreqArry = [24e9, 28e9, 39e9]
PwrArry = range(-50, 0, 2)
###############################################################################
from rssd.VSG.Common import VSG
from rssd.FileIO import FileIO
FIL = FileIO().makeFile(__file__)
SMW = VSG().jav_Open(SMW_IP, FIL) #Create SMW Object
###############################################################################
### Code Start
###############################################################################
SMW.Set_IQMod('OFF')
for frq in FreqArry:
SMW.Set_Freq(frq)
# SMW.Set_NRP_Freq(frq)
for pwr in PwrArry:
SMW.Set_RFPwr(pwr)
SMW.Set_RFState(1)
rdStr = SMW.Get_NRPPower()
FIL.write(f'{frq},{pwr},{rdStr}')
class TestGeneral(unittest.TestCase):
def setUp(self): #run before each test
self.SMW = VSG().jav_OpenTest(host)
def tearDown(self): #Run after each test
self.assertEqual(self.SMW.jav_Error()[0], '0')
self.SMW.jav_Close()
###############################################################################
### <Test>
###############################################################################
def test_SMW_ALC(self):
setVal = 'ON'
self.SMW.Set_ALC_RFDriveAmp(setVal)
def test_SMW_Arb_Freq(self):
setVal = 10e6
self.SMW.Set_ArbClockFreq(setVal)
getVal = self.SMW.Get_ArbClockFreq()
if self.SMW.connected: self.assertEqual(setVal, getVal)
def test_SMW_Arb_State(self):
setVal = '/var/user/UCS2010/GSM.wv'
self.SMW.Set_ArbWv(setVal)
self.SMW.Set_ArbState(1)
self.SMW.Set_ArbState(0)
getVal = self.SMW.Get_ArbName()
# nulVal = self.SMW.Get_ArbInfo()
nulVal = self.SMW.Get_PowerInfo()
if self.SMW.connected: self.assertTrue(getVal.find(setVal) > -1)
def test_SMW_BB_State(self):
self.SMW.Set_BBState(1)
self.SMW.Set_BBState(0)
def test_SMW_Connect(self):
if self.SMW.connected: self.assertEqual(self.SMW.Make, "Rohde&Schwarz")
def test_SMW_CrestFactor(self):
getVal = self.SMW.Get_CrestFactor()
def test_SMW_OS(self):
self.SMW.Set_OS_Dir('UCS2010')
getVal = self.SMW.Get_OS_Dir()
getVal = self.SMW.Get_OS_FileList()
def test_SMW_Init_Wideband(self):
self.SMW.Init_Wideband()
def test_SMW_IQMod(self):
self.SMW.Set_IQMod(1)
self.SMW.Set_IQMod(0)
self.SMW.Set_IQMod('OFF')
self.SMW.Set_IQMod('ON')
def test_SMW_Freq(self):
setVal = 2e6
self.SMW.Set_Freq(setVal)
getVal = self.SMW.Get_Freq()
if self.SMW.connected: self.assertEqual(setVal, getVal)
def test_SMW_ListMode(self):
self.SMW.Set_RFState(1)
self.SMW.Set_ListMode_File('testListMode.lsw')
self.SMW.Set_ListMode_File('testListMode')
self.SMW.Set_ListMode('LIST')
self.SMW.Set_ListMode_TrigSource('SING')
self.SMW.Set_ListMode_Dwell(0.01)
self.SMW.Set_ListMode_RMode('LIVE')
# self.SMW.Set_ListMode_TrigExecute()
# self.SMW.Set_ListMode_TrigWait()
getVal = self.SMW.Get_ListMode_IndexCurr()
getVal = self.SMW.Get_ListMode_IndexStop()
self.SMW.Set_ListMode('CW')
def test_SMW_ListMode_TrigSource(self):
self.SMW.Set_ListMode_TrigSource('SING')
self.SMW.Set_ListMode_TrigSource('AUTO')
self.SMW.Set_ListMode_TrigSource('STEP')
self.SMW.Set_ListMode_TrigSource('ESTEP')
self.SMW.Set_ListMode_TrigSource('ESING')
def test_SMW_PhaseDelta(self):
setVal = -10
self.SMW.Set_PhaseDelta(setVal)
def test_SMW_Pwr(self):
setVal = -10
self.SMW.Set_RFPwr(setVal)
getVal = self.SMW.Get_PowerRMS()
self.assertEqual(self.SMW.jav_Error()[0], '0')
if self.SMW.connected: self.assertEqual(setVal, getVal)
def test_SMW_SysConfigAll(self):
getVal = self.SMW.Get_SysC_All()
##########################################################
### Rohde & Schwarz Automation for demonstration use.
###
### Purpose: Load arb file on SMW
### Author: mclim
### Date: 2018.05.17
##########################################################
### User Entry
##########################################################
host = '192.168.1.114' #Get local machine name
##########################################################
### Code Start
##########################################################
from rssd.VSG.Common import VSG
SMW = VSG().jav_Open(host)
#SMW.jav_logSCPI() #Log SCPI commands
SMW.Set_Freq(10e9) #Set 10GHz
SMW.Set_RFPwr(-30) #Output -30dBm
SMW.Set_RFState('ON') #Turn RF Output on
SMW.Set_ArbWv('composer.wv') #Load file
SMW.Set_ArbState('ON') #Turn on Arb & IQ Mod
SMW.jav_ClrErr #Clear Errors
