def wrapper():
# Setup
i = Input(INPUT_PIN)
o = Output(OUTPUT_PIN, active_low=output_active_low)
passed = func(i, o)
# Teardown
i.disable()
o.disable()
return passed
def wrapper():
# Setup
b = Button(INPUT_PIN)
o = Output(OUTPUT_PIN, active_low=output_active_low)
passed = func(b, o)
# Teardown
b.disable()
o.disable()
return passed
def wrapper():
# Setup
i = Input(INPUT_PIN)
o = Output(OUTPUT_PIN, active_low=output_active_low)
passed = func(i, o)
# Teardown
i.disable()
o.disable()
return passed
def wrapper():
# Setup
b = Button(INPUT_PIN)
o = Output(OUTPUT_PIN, active_low=output_active_low)
passed = func(b, o)
# Teardown
b.disable()
o.disable()
return passed
def _output_defaults():
b = Button(INPUT_PIN)
o = Output(OUTPUT_PIN) # default is active low!
o.off() # HIGH
time.sleep(MINIMUM_BUTTON_PRESS_PERIOD)
released_worked = b.is_released() # Released button is HIGH
o.on() # LOW
time.sleep(MINIMUM_BUTTON_PRESS_PERIOD)
pressed_worked = b.is_pressed() # PRESSED button is LOW
DisablePin(OUTPUT_PIN)
DisablePin(INPUT_PIN)
return released_worked and pressed_worked
def board_rev():
# Verify board_family is Raspberry Pi 2
rev = Output.board_rev()
known = rev in [0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009,
0x000d, 0x000e, 0x000f, 0x0010, 0x0011, 0x0012,
0x1041, # Pi 2
0x2082, # Pi 3
]
print("Board rev: 0x{:04x}".format(rev))
if not known:
print("Board is not known. Some tests may fail.")
return known
def _test_output_defaults_with_input():
i = Input(INPUT_PIN)
o = Output(OUTPUT_PIN) # default is active low!
o.off() # HIGH
time.sleep(MINIMUM_INPUT_PERIOD)
high_worked = i.is_on()
o.on() # LOW
time.sleep(MINIMUM_INPUT_PERIOD)
low_worked = i.is_off()
i.disable()
o.disable()
return high_worked and low_worked
def _test_output_defaults_with_button():
b = Button(INPUT_PIN)
o = Output(OUTPUT_PIN) # default is active low!
o.off() # HIGH
time.sleep(MINIMUM_BUTTON_PRESS_PERIOD)
released_worked = b.is_released() # Released button is HIGH
o.on() # LOW
time.sleep(MINIMUM_BUTTON_PRESS_PERIOD)
pressed_worked = b.is_pressed() # PRESSED button is LOW
b.disable()
o.disable()
return released_worked and pressed_worked
def input_pull_test(pull, stayed_on, stayed_off, configure=False):
for n in range(5):
if configure:
i = Input(INPUT_PIN)
i.configure(pull=pull)
else:
i = Input(INPUT_PIN, pull=pull)
o = Output(OUTPUT_PIN, active_low=False)
o.on()
o.disable()
actually_stayed_on = i.is_on()
o = Output(OUTPUT_PIN, active_low=False)
o.off()
o.disable()
actually_stayed_off = i.is_off()
i.disable()
if stayed_on == actually_stayed_on and stayed_off == actually_stayed_off:
return True
time.sleep(0.5)
print("FAILED, RETRYING...")
print("TOO MANY RETRIES!")
return False
def _test_output_defaults_with_input():
i = Input(INPUT_PIN)
o = Output(OUTPUT_PIN) # default is active low!
o.off() # HIGH
time.sleep(MINIMUM_INPUT_PERIOD)
high_worked = i.is_on()
o.on() # LOW
time.sleep(MINIMUM_INPUT_PERIOD)
low_worked = i.is_off()
i.disable()
o.disable()
return high_worked and low_worked
def board_rev():
# Verify board_family is Raspberry Pi 2
rev = Output.board_rev()
known = rev in [
0x0004,
0x0005,
0x0006,
0x0007,
0x0008,
0x0009,
0x000d,
0x000e,
0x000f,
0x0010,
0x0011,
0x0012,
0x1041, # Pi 2
0x2082, # Pi 3
]
print("Board rev: 0x{:04x}".format(rev))
if not known:
print("Board is not known. Some tests may fail.")
return known
def on(pin_name):
if pin_name in pin_io:
pin_io[pin_name].disable()
pin_io[pin_name] = Output(pins[pin_name])
pin_io[pin_name].on()
from rstem.led_matrix import FrameBuffer, Sprite
from rstem.gpio import Output
import time
from random import random
fb = FrameBuffer([(0, 0, 90)])
outs = [
Output(17),
Output(27),
Output(22),
Output(23),
Output(4),
Output(14),
Output(15),
Output(18),
]
with open('scroller1.spr') as f:
s1 = Sprite(f.read())
s1_width = s1.width
s1 += s1
with open('scroller2.spr') as f:
s2 = Sprite(f.read())
s2_width = s2.width
s2 += s2
i = 0
i1 = 0
i2 = 0
#!/usr/bin/env python3
import rstem
from rstem.button import Button
from rstem.gpio import Output
from rstem.sound import Note
from random import randrange
import time
buttons = [Button(27), Button(23), Button(24), Button(22)]
lights = [Output(4), Output(18), Output(14), Output(15)]
notes = [Note('A'), Note('B'), Note('C'), Note('D')]
you_failed_note = Note('E2')
you_failed_note.volume = 1000
for note in notes:
note.volume = 400
for light in lights:
light.off()
play_order = []
failed = False
while not failed:
play_order += [randrange(4)]
# Play sequence
for i in play_order:
lights[i].on()
notes[i].play(0.4).wait()
lights[i].off()
time.sleep(0.2)
# ##################################
# Import Modules and Initialize Game
# ##################################
from rstem.button import Button
from rstem.gpio import Output
from rstem.sound import Note
from random import randrange
import time
from itertools import cycle
buttons = [Button(14), Button(15), Button(23), Button(17)]
lights = [Output(4), Output(18), Output(24), Output(27)]
notes = [Note('C5'), Note('D5'), Note('E5'), Note('F5')]
you_failed_note = Note('E4')
light_cycle = cycle(lights)
while True:
for b in buttons:
b.presses()
pressed = False
prev_light = next(light_cycle)
cur_light = next(light_cycle)
while not pressed:
prev_light.off()
cur_light.on()
prev_light = cur_light
cur_light = next(light_cycle)
for b in buttons:
# ##################################
# Import Modules and Initialize Game
# ##################################
from rstem.button import Button
from rstem.gpio import Output
from rstem.sound import Note
from random import randrange
import time
buttons = [Button(14), Button(15), Button(23), Button(17)]
lights = [Output(4, active_low=False), Output(18, active_low=False), Output(24, active_low=False), Output(27, active_low=False)]
notes = [Note('C'), Note('D'), Note('E'), Note('F')]
you_failed_note = Note('E3')
while True:
button_pressed = 0
count = 0
while not button_pressed:
for light in lights:
if count % 15:
light.off()
else:
light.on()
for button in buttons:
button_pressed += button.presses()
count += 1
time.sleep(0.2)
for light in lights:
import mido
from rstem.button import Button
from rstem.gpio import Output
output = mido.open_output('X18/XR18 MIDI 1')
button = Button(4)
clean_led = Output(2)
distorted_led = Output(22)
output.send(mido.Message('control_change', channel=1))
output.send(mido.Message('control_change', channel=1, control=1, value=127))
distorted = False
clean_led.on()
distorted_led.off()
while True:
if button.presses():
if distorted == True:
output.send(mido.Message('control_change', channel=1))
output.send(
mido.Message('control_change', channel=1, control=1,
value=127))
distorted = False
clean_led.on()
distorted_led.off()
elif distorted == False:
output.send(mido.Message('control_change', channel=1, value=127))
output.send(mido.Message('control_change', channel=1, control=1))
distorted = True
clean_led.off()
distorted_led.on()
#!/usr/bin/python3
from rstem.led_matrix import FrameBuffer, Text
from rstem.gpio import Output
import traceback
import sys
import time
led = Output(14)
while True:
num_uuts = 0
on = False
start = time.time()
while num_uuts <= 2 or num_uuts >= 12:
try:
num_uuts = FrameBuffer.detect()
except:
num_uuts = 0
if on:
led.on()
else:
led.off()
elapsed = time.time() - start
if on and elapsed > 0.3 or not on and elapsed > 2:
on = not on
start = time.time()
time.sleep(0.05)
def verify_cpu(i, o):
rev = Output.board_rev()
max_cpu = 20 if rev < 0x1000 else 10;
return testing.verify_cpu(max_cpu)
def input_pull_test(pull, stayed_on, stayed_off, configure=False):
for n in range(5):
if configure:
i = Input(INPUT_PIN)
i.configure(pull=pull)
else:
i = Input(INPUT_PIN, pull=pull)
o = Output(OUTPUT_PIN, active_low=False)
o.on()
o.disable()
actually_stayed_on = i.is_on()
o = Output(OUTPUT_PIN, active_low=False)
o.off()
o.disable()
actually_stayed_off = i.is_off()
i.disable()
if stayed_on == actually_stayed_on and stayed_off == actually_stayed_off:
return True
time.sleep(0.5)
print("FAILED, RETRYING...")
print("TOO MANY RETRIES!")
return False
def verify_cpu(i, o):
rev = Output.board_rev()
max_cpu = 20 if rev < 0x1000 else 10
return testing.verify_cpu(max_cpu)
#!/usr/bin/env python3 import rstem from rstem.gpio import Output import time light = Output(4) lights.on() time.sleep(1) lights.off()
#!/usr/bin/env python3
import rstem
from rstem.gpio import Output
import time
lights = [Output(4), Output(27), Output(17), Output(25)]
for light in lights:
light.off()
lights.on()
time.sleep(1)
lights.off()
