def test_bossac_create_with_adafruit(cc, req, bcfg_ini, bcfg_check, bcfg_val,
get_cod_par, sup, runner_config):
"""
Test SAM-BA extended protocol with Adafruit UF2 variation
Requirements:
SDK >= 0.12.0
Configuration:
Extended bootloader
CONFIG_USE_DT_CODE_PARTITION=y
CONFIG_BOOTLOADER_BOSSA_ADAFRUIT_UF2=y
with zephyr,code-partition
Input:
--bossac-port
Output:
--offset
"""
runner = BossacBinaryRunner(runner_config, port=TEST_BOSSAC_PORT)
runner.run('flash')
assert cc.call_args_list == [
call(x) for x in EXPECTED_COMMANDS_WITH_EXTENDED
]
def test_bossac_create_error_missing_kconfig(cc, req, bcfg_ini, bcfg_check,
bcfg_val, get_cod_par, sup,
runner_config):
"""
Test SAM-BA offset wrong configuration. No CONFIG_USE_DT_CODE_PARTITION
Kconfig definition.
Requirements:
Any SDK
Configuration:
Any bootloader
CONFIG_USE_DT_CODE_PARTITION=y (missing)
with zephyr,code-partition
Input:
Output:
Abort
"""
runner = BossacBinaryRunner(runner_config)
with pytest.raises(RuntimeError) as rinfo:
runner.run('flash')
assert str(rinfo.value) == \
"There is no CONFIG_USE_DT_CODE_PARTITION Kconfig defined at " \
+ TEST_BOARD_NAME + "_defconfig file.\n This means that" \
" zephyr,code-partition device tree node should not be defined." \
" Check Zephyr SAM-BA documentation."
def test_bossac_create_with_flash_address(cc, req, bcfg_ini, bcfg_check,
bcfg_val, get_cod_par, sup,
runner_config):
"""
Test command with offset parameter
Requirements:
SDK >= 0.12.0
Configuration:
Any bootloader
CONFIG_USE_DT_CODE_PARTITION=y
with zephyr,code-partition
Input:
--bossac-port
Output:
--offset
"""
args = [
'--bossac-port',
str(TEST_BOSSAC_PORT),
]
parser = argparse.ArgumentParser()
BossacBinaryRunner.add_parser(parser)
arg_namespace = parser.parse_args(args)
runner = BossacBinaryRunner.create(runner_config, arg_namespace)
runner.run('flash')
assert cc.call_args_list == [
call(x) for x in EXPECTED_COMMANDS_WITH_FLASH_ADDRESS
]
def test_bossac_create_with_omit_address(cc, req, bcfg_ini, bcfg_check,
bcfg_val, get_cod_par, sup,
runner_config):
"""
Test command that will omit offset because CONFIG_FLASH_LOAD_OFFSET is 0.
This case is valid for ROM bootloaders that define image start at 0 and
define flash partitions, to use the storage capabilities, for instance.
Requirements:
Any SDK
Configuration:
ROM bootloader
CONFIG_USE_DT_CODE_PARTITION=y
with zephyr,code-partition
Input:
--bossac-port
Output:
no --offset
"""
runner = BossacBinaryRunner(runner_config, port=TEST_BOSSAC_PORT)
runner.run('flash')
assert cc.call_args_list == [call(x) for x in EXPECTED_COMMANDS]
def test_bossac_create_with_oldsdk(cc, req, bcfg_ini, bcfg_check, bcfg_val,
get_cod_par, sup, runner_config):
"""
Test old SDK and ask user to upgrade
Requirements:
SDK <= 0.12.0
Configuration:
Any bootloader
CONFIG_USE_DT_CODE_PARTITION=y
with zephyr,code-partition
Input:
Output:
Abort
"""
runner = BossacBinaryRunner(runner_config)
with pytest.raises(RuntimeError) as rinfo:
with patch('os.path.isfile', side_effect=os_path_isfile_patch):
runner.run('flash')
assert str(rinfo.value) == "This version of BOSSA does not support the" \
" --offset flag. Please upgrade to a newer" \
" Zephyr SDK version >= 0.12.0."
def test_bossac_create_with_speed(cc, req, bcfg_ini, bcfg_check, bcfg_val,
get_cod_par, sup, runner_config):
"""
Test commands using a runner created from command line parameters.
Requirements:
Any SDK
Configuration:
ROM bootloader
CONFIG_USE_DT_CODE_PARTITION=n
without zephyr,code-partition
Input:
--bossac-port
--speed
Output:
no --offset
"""
args = [
'--bossac-port',
str(TEST_BOSSAC_PORT), '--speed',
str(TEST_BOSSAC_SPEED)
]
parser = argparse.ArgumentParser()
BossacBinaryRunner.add_parser(parser)
arg_namespace = parser.parse_args(args)
runner = BossacBinaryRunner.create(runner_config, arg_namespace)
runner.run('flash')
assert cc.call_args_list == [call(x) for x in EXPECTED_COMMANDS_WITH_SPEED]
def test_bossac_create_error_missing_dt_info(cc, req, bcfg_ini, bcfg_check,
bcfg_val, get_cod_par, sup,
runner_config):
"""
Test SAM-BA offset wrong configuration. No chosen code partition.
Requirements:
Any SDK
Configuration:
Any bootloader
CONFIG_USE_DT_CODE_PARTITION=y
with zephyr,code-partition (missing)
Input:
Output:
Abort
"""
runner = BossacBinaryRunner(runner_config)
with pytest.raises(RuntimeError) as rinfo:
with patch('os.path.isfile', side_effect=os_path_isfile_patch):
runner.run('flash')
assert str(rinfo.value) == "The device tree zephyr,code-partition" \
" chosen node must be defined."
def test_bossac_create_with_arduino(cc, req, bcfg_ini, bcfg_check, bcfg_val,
get_cod_par, sup, runner_config):
"""
Test SAM-BA extended protocol with Arduino variation
Requirements:
SDK >= 0.12.0
Configuration:
Extended bootloader
CONFIG_USE_DT_CODE_PARTITION=y
CONFIG_BOOTLOADER_BOSSA_ARDUINO=y
with zephyr,code-partition
Input:
--bossac-port
Output:
--offset
"""
runner = BossacBinaryRunner(runner_config, port=TEST_BOSSAC_PORT)
with patch('os.path.isfile', side_effect=os_path_isfile_patch):
runner.run('flash')
assert cc.call_args_list == [
call(x) for x in EXPECTED_COMMANDS_WITH_EXTENDED
]
def test_bossac_create_with_adafruit(cc, req, get_cod_par, sup, runner_config,
tmpdir):
"""
Test SAM-BA extended protocol with Adafruit UF2 variation
Requirements:
SDK >= 0.12.0
Configuration:
Extended bootloader
CONFIG_USE_DT_CODE_PARTITION=y
CONFIG_BOOTLOADER_BOSSA_ADAFRUIT_UF2=y
with zephyr,code-partition
Input:
--bossac-port
Output:
--offset
"""
runner_config = adjust_runner_config(runner_config, tmpdir,
DOTCONFIG_COND4)
runner = BossacBinaryRunner(runner_config, port=TEST_BOSSAC_PORT)
with patch('os.path.isfile', side_effect=os_path_isfile_patch):
runner.run('flash')
assert cc.call_args_list == [
call(x) for x in EXPECTED_COMMANDS_WITH_EXTENDED
]
def test_bossac_create(cc, req, get_cod_par, sup, runner_config, tmpdir):
"""
Test commands using a runner created from command line parameters.
Requirements:
Any SDK
Configuration:
ROM bootloader
CONFIG_USE_DT_CODE_PARTITION=n
without zephyr,code-partition
Input:
--bossac-port
Output:
no --offset
"""
args = ['--bossac-port', str(TEST_BOSSAC_PORT)]
parser = argparse.ArgumentParser()
BossacBinaryRunner.add_parser(parser)
arg_namespace = parser.parse_args(args)
runner_config = adjust_runner_config(runner_config, tmpdir, DOTCONFIG_STD)
runner = BossacBinaryRunner.create(runner_config, arg_namespace)
with patch('os.path.isfile', side_effect=os_path_isfile_patch):
runner.run('flash')
assert cc.call_args_list == [call(x) for x in EXPECTED_COMMANDS]
def test_bossac_create_with_legacy(cc, req, get_cod_par, sup,
runner_config, tmpdir):
"""
Test SAM-BA legacy protocol
Requirements:
Any SDK
Configuration:
Extended bootloader
CONFIG_USE_DT_CODE_PARTITION=y
CONFIG_BOOTLOADER_BOSSA_LEGACY=y
with zephyr,code-partition
Input:
--bossac-port
Output:
no --offset
"""
runner_config = adjust_runner_config(runner_config, tmpdir,
DOTCONFIG_COND6)
runner = BossacBinaryRunner(runner_config, port=TEST_BOSSAC_PORT)
with patch('os.path.isfile', side_effect=os_path_isfile_patch):
runner.run('flash')
assert cc.call_args_list == [call(x) for x in EXPECTED_COMMANDS]
def test_bossac_create(cc, req, runner_config):
'''Test commands using a runner created from command line parameters.'''
args = ['--bossac-port', str(TEST_BOSSAC_PORT)]
parser = argparse.ArgumentParser()
BossacBinaryRunner.add_parser(parser)
arg_namespace = parser.parse_args(args)
runner = BossacBinaryRunner.create(runner_config, arg_namespace)
runner.run('flash')
assert cc.call_args_list == [call(x) for x in EXPECTED_COMMANDS]
def test_bossac_init(cc, req, supports, runner_config):
'''Test commands using a runner created by constructor.'''
runner = BossacBinaryRunner(runner_config,
port=TEST_BOSSAC_PORT,
offset=TEST_OFFSET)
runner.run('flash')
assert cc.call_args_list == [
call(x) for x in EXPECTED_COMMANDS_WITH_OFFSET
]
def test_bossac_create_with_flash_address(cc, req, gfa, bcfg, supports,
runner_config):
args = [
'--bossac-port',
str(TEST_BOSSAC_PORT),
]
parser = argparse.ArgumentParser()
BossacBinaryRunner.add_parser(parser)
arg_namespace = parser.parse_args(args)
runner = BossacBinaryRunner.create(runner_config, arg_namespace)
runner.run('flash')
assert cc.call_args_list == [
call(x) for x in EXPECTED_COMMANDS_WITH_FLASH_ADDRESS
]
def test_bossac_init(cc, req, bcfg_ini, bcfg_check, bcfg_val, get_cod_par, sup,
runner_config):
"""
Test commands using a runner created by constructor.
Requirements:
Any SDK
Configuration:
ROM bootloader
CONFIG_USE_DT_CODE_PARTITION=n
without zephyr,code-partition
Input:
none
Output:
no --offset
"""
runner = BossacBinaryRunner(runner_config, port=TEST_BOSSAC_PORT)
runner.run('flash')
assert cc.call_args_list == [call(x) for x in EXPECTED_COMMANDS]
def test_bossac_init(cc, req, get_cod_par, sup, runner_config, tmpdir):
"""
Test commands using a runner created by constructor.
Requirements:
Any SDK
Configuration:
ROM bootloader
CONFIG_USE_DT_CODE_PARTITION=n
without zephyr,code-partition
Input:
none
Output:
no --offset
"""
runner_config = adjust_runner_config(runner_config, tmpdir, DOTCONFIG_STD)
runner = BossacBinaryRunner(runner_config, port=TEST_BOSSAC_PORT)
with patch('os.path.isfile', side_effect=os_path_isfile_patch):
runner.run('flash')
assert cc.call_args_list == [call(x) for x in EXPECTED_COMMANDS]