def is_tipc_properly_configured():
tipc_config_cmd = get_tipc_config_cmd()
tipc_addr = Popen("%s -addr" % tipc_config_cmd)[0]
tipc_addr = tipc_addr.split(":")[1].strip()[1:-1]
if tipc_addr != "1.1.%s" % safplus.get_safplus_node_addr():
log.debug(
"System configured TIPC address : %s, user configured TIPC address : %s"
% (tipc_addr, "1.1.%s" % safplus.get_safplus_node_addr())
)
return False
tipc_netid = Popen("%s -netid" % tipc_config_cmd)[0]
tipc_netid = tipc_netid.split(":")[1].strip()
if tipc_netid != get_safplus_tipc_netid():
log.debug(
"System configured netid : %s, user configured netid : %s" % (tipc_netid, get_safplus_tipc_netid())
)
return False
bearers = Popen("%s -b" % tipc_config_cmd)
bearers = [e[:-1] for e in bearers[1:]]
num, link_name = getMultiLink()
tipc_bearer = "eth:%s" % link_name[0]
if tipc_bearer not in bearers:
log.debug("Configured bearer %s not in bearer list %s" % (tipc_bearer, bearers))
return False
return True
def is_tipc_properly_configured():
tipc_config_cmd = get_tipc_config_cmd()
tipc_addr = Popen('%s -addr' % tipc_config_cmd)[0]
tipc_addr = tipc_addr.split(':')[1].strip()[1:-1]
if tipc_addr != '1.1.%s' % safplus.get_safplus_node_addr():
log.debug(
'System configured TIPC address : %s, user configured TIPC address : %s'
% (tipc_addr, '1.1.%s' % safplus.get_safplus_node_addr()))
return False
tipc_netid = Popen('%s -netid' % tipc_config_cmd)[0]
tipc_netid = tipc_netid.split(':')[1].strip()
if tipc_netid != get_safplus_tipc_netid():
log.debug(
'System configured netid : %s, user configured netid : %s' %
(tipc_netid, get_safplus_tipc_netid()))
return False
bearers = Popen('%s -b' % tipc_config_cmd)
bearers = [e[:-1] for e in bearers[1:]]
num, link_name = getMultiLink()
tipc_bearer = 'eth:%s' % link_name[0]
if tipc_bearer not in bearers:
log.debug('Configured bearer %s not in bearer list %s' %
(tipc_bearer, bearers))
return False
return True
def config_tipc_module():
if not is_tipc_build():
log.warning('Transport protocol : UDP only')
return
tipc_netid = get_safplus_tipc_netid()
node_addr = safplus.get_safplus_node_addr()
num,link_name = getMultiLink()
log.info('num of bearer : %d ...' %(num))
tipcCfg = os.getenv('CL_TIPC_CFG_PARAMS')
if tipcCfg is None: tipcCfg = ""
cmd = '%s -netid=%s -addr=1.1.%s %s -be=eth:%s' % (get_tipc_config_cmd(), tipc_netid, node_addr, tipcCfg, link_name[0])
log.debug('TIPC command is [%s]' % cmd)
ret, output, signal, core = system(cmd)
if ret:
output_buf = ''.join(output)
if 'unable to enable bearer' in output_buf:
msg = ''.join(['Failed to configure the tipc module. ',
'System is configured to use %s, but tipc '
'cannot use this interface. ' % link_name,
'Does it exist? To change the interface, '
'edit the LINK_NAME and linkName fields in '
'%s/asp.conf and %s/clGmsConfig.xml.' %\
(safplus.SAFPLUS_ETC_DIR, safplus.SAFPLUS_ETC_DIR)])
# Try to remove the tipc module if we failed to configure tipc.
# Otherwise it will work in the next run, but only in "local" mode.
num,link_name = getMultiLink()
cmd = 'tipc-config -bd=eth:%s' %(link_name[0])
ret, output, signal, core = system(cmd)
system("rmmod tipc")
safplus.fail_and_exit(msg)
elif 'TIPC module not installed' in output_buf:
msg = ''.join(['Failed to configure the tipc module. ',
'The tipc kernel module is not loaded. ',
'Use \'lsmod | grep tipc\' to see that '
'it is not loaded.'])
safplus.fail_and_exit(msg)
else:
msg1 = ''.join(['Failed to configure the tipc module. ',
'Executed \'%s\'. ' % cmd,
'Received unknown tipc-config error: %s' % output_buf])
msg2 = '\n'.join(['Please check that: ',
'1. The tipc kernel module is loaded. '
'(lsmod | grep tipc)',
'2. The tipc-config command is in your $PATH.',
'3. Values for TIPC_NETID, DEFAULT_NODEADDR '
'and LINK_NAME are correct in %s/asp.conf.' % safplus.SAFPLUS_ETC_DIR])
safplus.fail_and_exit(msg1 + msg2)
for x in range(1,num) :
cmd = '%s -be=eth:%s' % (get_tipc_config_cmd(),link_name[x])
log.debug('enable bearer name : %s ...' %(cmd))
ret, output, signal, core = system(cmd)
def start_watchdog():
global TipcSettings
# check whether watchdog exist
watchdog_pid = get_watchdog_pid()
if not watchdog_pid:
if TipcSettings=='enforce':
safplus_tipc.unload_tipc_module()
if TipcSettings!='ignore':
safplus_tipc.load_config_tipc_module()
set_ld_library_paths()
# setsid <prog> & daemonizes...
cmd = 'setsid %s/safplus_watchdog.py &' % safplus.SAFPLUS_ETC_DIR
os.system(cmd)
else:
safplus.fail_and_exit('SAFplus is already running on node [%s], pid [%s]' % (safplus.get_safplus_node_addr(), watchdog_pid))
def is_tipc_properly_configured():
tipc_config_cmd = get_tipc_config_cmd()
tipc_addr = ''
if is_tipc_tool_exist():
tipc_addr = Popen('%s node get address' % tipc_config_cmd)[0]
tipc_addr = tipc_addr.strip()[1:-1]
else:
tipc_addr = Popen('%s -addr' % tipc_config_cmd)[0]
tipc_addr = tipc_addr.split(':')[1].strip()[1:-1]
if tipc_addr != '1.1.%s' % safplus.get_safplus_node_addr():
log.debug('System configured TIPC address : %s, user configured TIPC address : %s' % (tipc_addr, '1.1.%s' % safplus.get_safplus_node_addr()))
return False
tipc_netid = ''
if is_tipc_tool_exist():
tipc_netid = Popen('%s node get netid' % tipc_config_cmd)[0]
tipc_netid = tipc_netid.strip()
else:
tipc_netid = Popen('%s -netid' % tipc_config_cmd)[0]
tipc_netid = tipc_netid.split(':')[1].strip()
if tipc_netid != get_safplus_tipc_netid():
log.debug('System configured netid : %s, user configured netid : %s' % (tipc_netid, get_safplus_tipc_netid()))
return False
num,link_name= getMultiLink()
if is_tipc_tool_exist():
bearers = Popen('%s bearer list' %tipc_config_cmd)
if not bearers or len(bearers) < 1:
return False
bearers = [e.strip().split(':')[1] for e in bearers]
for x in range(0,num):
if link_name[x] not in bearers:
log.debug('Configured bearer %s not in bearer list %s' % (tipc_bearer, bearers))
return False
else:
bearers = Popen('%s -b' % tipc_config_cmd)
bearers = [e[:-1] for e in bearers[1:]]
tipc_bearer = 'eth:%s' % link_name[0]
if tipc_bearer not in bearers:
log.debug('Configured bearer %s not in bearer list %s' % (tipc_bearer, bearers))
return False
return True
def start_watchdog():
global TipcSettings
# check whether watchdog exist
watchdog_pid = get_watchdog_pid()
if not watchdog_pid:
if TipcSettings == 'enforce':
safplus_tipc.unload_tipc_module()
if TipcSettings != 'ignore':
safplus_tipc.load_config_tipc_module()
set_ld_library_paths()
# setsid <prog> & daemonizes...
cmd = 'setsid %s/safplus_watchdog.py &' % safplus.SAFPLUS_ETC_DIR
os.system(cmd)
else:
safplus.fail_and_exit(
'SAFplus is already running on node [%s], pid [%s]' %
(safplus.get_safplus_node_addr(), watchdog_pid))
def start_watchdog():
global tipc_settings
# check whether watchdog exist
watchdog_pid = get_watchdog_pid()
if not watchdog_pid:
if safplus_tipc.has_tipc_plugin() and (safplus_tipc.ignore_tipc_settings() == False):
if safplus_tipc.enforce_tipc_settings() == True:
safplus_tipc.unload_tipc_module()
safplus_tipc.load_config_tipc_module()
set_ld_library_paths()
codeBootFile = safplus.SAFPLUS_RUN_DIR + '/' + safplus.SAFPLUS_CODEBOOT_FILE
safplus.touch(codeBootFile) # create 'safplus_codeboot' file to indicate start-up of SAFplus_AMF
# setsid <prog> & daemonizes...
cmd = 'setsid %s/safplus_watchdog.py &' % safplus.SAFPLUS_ETC_DIR
os.system(cmd)
else:
safplus.fail_and_exit('SAFplus is already running on node [%s], pid [%s]' % (safplus.get_safplus_node_addr(), watchdog_pid))
def start_watchdog():
global tipc_settings
# check whether watchdog exist
watchdog_pid = get_watchdog_pid()
if not watchdog_pid:
if safplus_tipc.has_tipc_plugin() and (
safplus_tipc.ignore_tipc_settings() == False):
if safplus_tipc.enforce_tipc_settings() == True:
safplus_tipc.unload_tipc_module()
safplus_tipc.load_config_tipc_module()
set_ld_library_paths()
codeBootFile = safplus.SAFPLUS_RUN_DIR + '/' + safplus.SAFPLUS_CODEBOOT_FILE
safplus.touch(
codeBootFile
) # create 'safplus_codeboot' file to indicate start-up of SAFplus_AMF
# setsid <prog> & daemonizes...
cmd = 'setsid %s/safplus_watchdog.py &' % safplus.SAFPLUS_ETC_DIR
os.system(cmd)
else:
safplus.fail_and_exit(
'SAFplus is already running on node [%s], pid [%s]' %
(safplus.get_safplus_node_addr(), watchdog_pid))
def config_tipc_module():
if not is_tipc_build():
log.warning("Transport protocol : UDP only")
return
tipc_netid = get_safplus_tipc_netid()
node_addr = safplus.get_safplus_node_addr()
num, link_name = getMultiLink()
log.info("num of bearer : %d ..." % (num))
tipcCfg = os.getenv("CL_TIPC_CFG_PARAMS")
if tipcCfg is None:
tipcCfg = ""
cmd = "%s -netid=%s -addr=1.1.%s %s -be=eth:%s" % (
get_tipc_config_cmd(),
tipc_netid,
node_addr,
tipcCfg,
link_name[0],
)
log.debug("TIPC command is [%s]" % cmd)
ret, output, signal, core = system(cmd)
if ret:
output_buf = "".join(output)
if "unable to enable bearer" in output_buf:
msg = "".join(
[
"Failed to configure the tipc module. ",
"System is configured to use %s, but tipc " "cannot use this interface. " % link_name,
"Does it exist? To change the interface, "
"edit the LINK_NAME and linkName fields in "
"%s/asp.conf and %s/clGmsConfig.xml." % (safplus.SAFPLUS_ETC_DIR, safplus.SAFPLUS_ETC_DIR),
]
)
# Try to remove the tipc module if we failed to configure tipc.
# Otherwise it will work in the next run, but only in "local" mode.
num, link_name = getMultiLink()
cmd = "tipc-config -bd=eth:%s" % (link_name[0])
ret, output, signal, core = system(cmd)
system("rmmod tipc")
safplus.fail_and_exit(msg)
elif "TIPC module not installed" in output_buf:
msg = "".join(
[
"Failed to configure the tipc module. ",
"The tipc kernel module is not loaded. ",
"Use 'lsmod | grep tipc' to see that " "it is not loaded.",
]
)
safplus.fail_and_exit(msg)
else:
msg1 = "".join(
[
"Failed to configure the tipc module. ",
"Executed '%s'. " % cmd,
"Received unknown tipc-config error: %s" % output_buf,
]
)
msg2 = "\n".join(
[
"Please check that: ",
"1. The tipc kernel module is loaded. " "(lsmod | grep tipc)",
"2. The tipc-config command is in your $PATH.",
"3. Values for TIPC_NETID, DEFAULT_NODEADDR "
"and LINK_NAME are correct in %s/asp.conf." % safplus.SAFPLUS_ETC_DIR,
]
)
safplus.fail_and_exit(msg1 + msg2)
for x in range(1, num):
cmd = "%s -be=eth:%s" % (get_tipc_config_cmd(), link_name[x])
log.debug("enable bearer name : %s ..." % (cmd))
ret, output, signal, core = system(cmd)