def newWikiTextBlock(cont, x, y, w):
h = 0
#title
title = scribus.createText(x, y, w, 1)
scribus.setText(cont["wp"].title, title)
scribus.setTextAlignment(scribus.ALIGN_LEFT, title)
scribus.setFont("Open Sans Bold", title)
scribus.setFontSize(14, title)
scribus.setLineSpacing(14, title)
tw, th = scribus.getSize(title)
while scribus.textOverflows(title):
scribus.sizeObject(tw, th + 1, title)
tw, th = scribus.getSize(title)
h = th
#content
content = scribus.createText(x, y + h + 1, w, 1)
scribus.setText(cont["summary"], content)
scribus.setTextAlignment(scribus.ALIGN_LEFT, content)
scribus.setFont("Open Sans Regular", content)
scribus.setFontSize(10, content)
tw, th = scribus.getSize(content)
while scribus.textOverflows(content):
scribus.sizeObject(tw, th + 1, content)
tw, th = scribus.getSize(content)
if h + th > bH:
break
h = h + th
return h
def createCell(text, roffset, coffset, w, h, marginl, margint, isBlack):
#Create textbox
box=scribus.createRect(marginl+(roffset-1)*w,margint+(coffset-1)*h, w, h)
textBox=scribus.createText(marginl+(roffset-1)*w,margint+(coffset-1)*h, w, h)
#insert the text into textbox
scribus.setFont("Arial Bold", textBox)
#Default font size
fontSize=12
if len(text) < 50: fontSize=14
if len(text) < 20: fontSize=16
scribus.setFontSize(fontSize, textBox)
scribus.setTextDistances(3, 3, 3, 3, textBox)
scribus.insertText(text, 0, textBox)
#black card
if isBlack==True:
scribus.setFillColor("Black", box)
scribus.setTextColor("White", textBox)
scribus.setLineColor("White", box)
#add Logo
hOffset=37
wOffset=5
addLogo(marginl+(roffset-1)*w+wOffset,margint+(coffset-1)*h+hOffset, isBlack)
return
def addWatermark(self):
'''Create a Draft watermark layer. This was taken from:
http://wiki.scribus.net/canvas/Adding_%27DRAFT%27_to_a_document'''
L = len(self.watermark) # The length of the word
# will determine the font size
scribus.defineColor("gray", 11, 11, 11, 11) # Set your own color here
u = scribus.getUnit() # Get the units of the document
al = scribus.getActiveLayer() # Identify the working layer
scribus.setUnit(
scribus.UNIT_MILLIMETERS) # Set the document units to mm,
(w, h) = scribus.getPageSize() # needed to set the text box size
scribus.createLayer("c")
scribus.setActiveLayer("c")
T = scribus.createText(w / 6, 6 * h / 10, h,
w / 2) # Create the text box
scribus.setText(self.watermark, T) # Insert the text
scribus.setTextColor("gray", T) # Set the color of the text
scribus.setFontSize(
(w / 210) * (180 - 10 * L),
T) # Set the font size according to length and width
scribus.rotateObject(45, T) # Turn it round antclockwise 45 degrees
scribus.setUnit(u) # return to original document units
# FIXME: It would be nice if we could move the watermark box down to the lowest layer so
# that it is under all the page text. Have not found a method to do this. For now we just
# plop the watermark on top of everything else.
scribus.setActiveLayer(al) # return to the original active layer
def drawHeaderFooter(pagetitle):
"""draw some info on the pages"""
# get page size
pageSize=scribus.getPageSize()
pageWidth=pageSize[0]
pageHeight=pageSize[1]
#pageMargins
pageMargins=scribus.getPageMargins()
topMargin=pageMargins[0]
leftMargin=pageMargins[1]
rightMargin=pageMargins[2]
bottomMargin=pageMargins[3]
#create textbox and insert text for header
textbox=scribus.createText(leftMargin, topMargin, pageWidth-leftMargin-rightMargin, HEADERSIZE)
#set proper font size and alignment
scribus.setFontSize(18, textbox)
scribus.setTextAlignment(scribus.ALIGN_CENTERED, textbox)
#load the string into the textbox
headerstring=pagetitle
scribus.insertText(headerstring, 0, textbox)
scribus.setTextColor("Black", textbox)
#create textbox and insert text for footer
textbox=scribus.createText(leftMargin, pageHeight-bottomMargin-FOOTERSIZE, pageWidth-leftMargin-rightMargin, FOOTERSIZE)
#set proper font size and alignment
scribus.setFontSize(9, textbox)
scribus.setTextAlignment(scribus.ALIGN_LEFT, textbox)
#load the string into the textbox
footerstring="Created using ColorChart.py V %s script for Scribus by Sebastian Stetter - http://www.sebastianstetter.de" % str(__version__)
scribus.insertText(footerstring, 0, textbox)
scribus.setTextColor("Black", textbox)
def createCell(text, roffset, coffset, w, h, marginl, margint, isBlack):
#Create textbox
box=scribus.createRect(marginl+(roffset-1)*w,margint+(coffset-1)*h, w, h)
textBox=scribus.createText(marginl+(roffset-1)*w,margint+(coffset-1)*h, w, h)
#insert the text into textbox
scribus.setFont("Arial Bold", textBox)
#Default font size
fontSize=12
if len(text) < 50: fontSize=14
if len(text) < 20: fontSize=16
scribus.setFontSize(fontSize, textBox)
scribus.setTextDistances(3, 3, 3, 3, textBox)
scribus.insertText(text, 0, textBox)
#black card
if isBlack==True:
scribus.setFillColor("Black", box)
scribus.setTextColor("White", textBox)
scribus.setLineColor("White", box)
#add Logo
hOffset=37
wOffset=5
addLogo(marginl+(roffset-1)*w+wOffset,margint+(coffset-1)*h+hOffset, isBlack)
return
def addWatermark (self) :
'''Create a Draft watermark layer. This was taken from:
http://wiki.scribus.net/canvas/Adding_%27DRAFT%27_to_a_document'''
L = len(self.watermark) # The length of the word
# will determine the font size
scribus.defineColor("gray", 11, 11, 11, 11) # Set your own color here
u = scribus.getUnit() # Get the units of the document
al = scribus.getActiveLayer() # Identify the working layer
scribus.setUnit(scribus.UNIT_MILLIMETERS) # Set the document units to mm,
(w,h) = scribus.getPageSize() # needed to set the text box size
scribus.createLayer("c")
scribus.setActiveLayer("c")
T = scribus.createText(w/6, 6*h/10 , h, w/2) # Create the text box
scribus.setText(self.watermark, T) # Insert the text
scribus.setTextColor("gray", T) # Set the color of the text
scribus.setFontSize((w/210)*(180 - 10*L), T) # Set the font size according to length and width
scribus.rotateObject(45, T) # Turn it round antclockwise 45 degrees
scribus.setUnit(u) # return to original document units
# FIXME: It would be nice if we could move the watermark box down to the lowest layer so
# that it is under all the page text. Have not found a method to do this. For now we just
# plop the watermark on top of everything else.
scribus.setActiveLayer(al) # return to the original active layer
def newWikiTextBlock(cont,x,y,w):
h = 0
#title
title = scribus.createText(x, y, w, 1)
scribus.setText(cont["wp"].title, title)
scribus.setTextAlignment(scribus.ALIGN_LEFT, title)
scribus.setFont("Open Sans Bold", title)
scribus.setFontSize(14, title)
scribus.setLineSpacing(14, title)
tw,th = scribus.getSize(title)
while scribus.textOverflows(title):
scribus.sizeObject(tw, th+1, title)
tw,th = scribus.getSize(title)
h = th
#content
content = scribus.createText(x, y+h+1, w, 1)
scribus.setText(cont["summary"], content)
scribus.setTextAlignment(scribus.ALIGN_LEFT, content)
scribus.setFont("Open Sans Regular", content)
scribus.setFontSize(10, content)
tw,th = scribus.getSize(content)
while scribus.textOverflows(content):
scribus.sizeObject(tw, th+1, content)
tw,th = scribus.getSize(content)
if h+th > bH:
break
h = h+th
return h
def textframes(text_id, x, y, width, height, bg_colour, text_colour, fontsize, font, spacing, parsedtext, layer, linespacing=0, resize=0): scribus.createText(x, y, width, height, text_id) #scribus.text_id = scribus.createText(120, 10, 200, 20) scribus.setText(parsedtext, text_id) scribus.setFont(font, text_id) scribus.setTextColor(text_colour, text_id) scribus.setTextDistances(3*spacing, spacing, 0, spacing, text_id) scribus.sentToLayer(layer, text_id) scribus.setFontSize(fontsize, text_id)
def addLogo(x, y, isBlack):
#square side
a=5
#line
line=0.01
#angle
angle=15
#LightGrey
scribus.defineColor("LightGrey",0,0,0,128)
#DarkGrey
scribus.defineColor("DarkGrey",0,0,0,192)
# White cards colors
squareColor1="Black"
lineColor1="White"
squareColor2="DarkGrey"
lineColor2="White"
squareColor3="LightGrey"
lineColor3="White"
titleColor="Black"
# Black cards colors
if isBlack==True:
squareColor1="DarkGrey"
lineColor1="DarkGrey"
squareColor2="LightGrey"
lineColor2="LightGrey"
squareColor3="White"
lineColor3="White"
titleColor="White"
square1=scribus.createRect(x, y+a/10, a, a)
scribus.setLineWidth(1, square1)
scribus.setFillColor(squareColor1, square1)
scribus.setLineColor(lineColor1, square1)
scribus.rotateObject(angle, square1)
square2=scribus.createRect(x+a/2, y, a, a)
scribus.setLineWidth(1, square2)
scribus.setFillColor(squareColor2, square2)
scribus.setLineColor(lineColor2, square2)
square3=scribus.createRect(x+a, y, a, a)
scribus.setLineWidth(1, square3)
scribus.setFillColor(squareColor3, square3)
scribus.setLineColor(lineColor3, square3)
scribus.rotateObject(-angle, square3)
title=scribus.createText(x+10,y+2, 50, 5)
scribus.setFont("Arial Bold", title)
scribus.setFontSize(8, title)
scribus.insertText("Game of Filth", 0, title)
scribus.setTextColor(titleColor, title)
return
def addLogo(x, y, isBlack):
#square side
a=5
#line
line=0.01
#angle
angle=15
#LightGrey
scribus.defineColor("LightGrey",0,0,0,128)
#DarkGrey
scribus.defineColor("DarkGrey",0,0,0,192)
# White cards colors
squareColor1="Black"
lineColor1="White"
squareColor2="DarkGrey"
lineColor2="White"
squareColor3="LightGrey"
lineColor3="White"
titleColor="Black"
# Black cards colors
if isBlack==True:
squareColor1="DarkGrey"
lineColor1="DarkGrey"
squareColor2="LightGrey"
lineColor2="LightGrey"
squareColor3="White"
lineColor3="White"
titleColor="White"
square1=scribus.createRect(x, y+a/10, a, a)
scribus.setLineWidth(1, square1)
scribus.setFillColor(squareColor1, square1)
scribus.setLineColor(lineColor1, square1)
scribus.rotateObject(angle, square1)
square2=scribus.createRect(x+a/2, y, a, a)
scribus.setLineWidth(1, square2)
scribus.setFillColor(squareColor2, square2)
scribus.setLineColor(lineColor2, square2)
square3=scribus.createRect(x+a, y, a, a)
scribus.setLineWidth(1, square3)
scribus.setFillColor(squareColor3, square3)
scribus.setLineColor(lineColor3, square3)
scribus.rotateObject(-angle, square3)
title=scribus.createText(x+10,y+2, 50, 5)
scribus.setFont("Arial Bold", title)
scribus.setFontSize(8, title)
scribus.insertText("Cards Against Humanity", 0, title)
scribus.setTextColor(titleColor, title)
return
def main(argv):
"""This is a documentation string. Write a description of what your code
does here. You should generally put documentation strings ("docstrings")
on all your Python functions."""
#########################
# YOUR CODE GOES HERE #
#########################
#copyPlayer("__player__","PLAYER 1")
#copyPlayer("__player__","PLAYER 2")
#copyPlayer("__player__","PLAYER 3")
csv = scribus.fileDialog('Open input', 'CSV files (*.csv)')
stuff = {
'NAME': 'Mike Hingley',
'ADDRESS': '22 Trinity Street, Cradley Heath, West Midlands',
'PHOTO': '128.jpg'
}
print(os.path.dirname(os.path.realpath(sys.argv[0])))
print os.getcwd()
print(sys.path[0])
print(os.path.abspath(''))
sourceName = "__player__"
if scribus.objectExists(sourceName):
scribus.selectObject(sourceName)
scribus.unGroupObject()
childObjectCount = scribus.selectionCount()
for x in range(0, childObjectCount):
element = scribus.getSelectedObject(x)
if scribus.getObjectType(str(element)) == 'TextFrame':
current = scribus.getAllText(element)
if current in stuff:
fontsize = scribus.getFontSize(element)
font = scribus.getFont(element)
scribus.setText(stuff[current], element)
scribus.setFont(font)
scribus.setFontSize(fontsize)
if scribus.getObjectType(str(element)) == 'ImageFrame':
current = scribus.getImageFile(element)
currentName = os.path.basename(os.path.normpath(current))
print current
print currentName
if currentName in stuff:
ExistingFolder = os.path.split(current)
print ExistingFolder[0]
newFile = os.path.join(ExistingFolder[0],
stuff[currentName])
print newFile
scribus.loadImage(newFile, element)
print scribus.getObjectType(str(element))
print str(scribus.getSelectedObject(x))
scribus.groupObjects()
print "name = " + scribus.getSelectedObject()
scribus.setNewName("__player__", scribus.getSelectedObject())
def setPageNumber (self, crds, pageSide, row, pageNumber) :
'''Place the page number on the page if called for.'''
if self.pageNumbers :
# Make the page number box
pNumBox = scribus.createText(crds[row]['pageNumXPos' + pageSide], crds[row]['pageNumYPos'], crds[row]['pageNumWidth'], crds[row]['pageNumHeight'])
# Put the page number in it and format according to the page we are on
scribus.setText(`pageNumber`, pNumBox)
if pageSide == 'Odd' :
scribus.setTextAlignment(scribus.ALIGN_RIGHT, pNumBox)
else:
scribus.setTextAlignment(scribus.ALIGN_LEFT, pNumBox)
scribus.setFont(self.fonts['pageNum']['bold'], pNumBox)
scribus.setFontSize(self.fonts['pageNum']['size'], pNumBox)
def drawColor(colorname, h, v, width, height): # h horizontal position, v vertical position
"""draws a color chart field with its caption for the given colorname at the h and v position
"""
# get cmyk values and convert them to 0 - 255 values
color = scribus.getColor(colorname)
c = int(round(color[0] / 2.55))
m = int(round(color[1] / 2.55))
y = int(round(color[2] / 2.55))
k = int(round(color[3] / 2.55))
# get rgb color
rgbcolor = scribus.getColorAsRGB(colorname)
r = rgbcolor[0]
g = rgbcolor[1]
b = rgbcolor[2]
# get webcolor
webcolor = rgbhex(r, g, b)
# but String for Textbox together
colorDisplay = colorname
if scribus.isSpotColor(colorname):
colorDisplay += " (Spot Color)"
colorstring = "%s\nC %i, M %i, Y %i, K %i, \nR %i, G %i, B %i \nRGB: %s" % (
colorDisplay,
c,
m,
y,
k,
r,
g,
b,
webcolor,
)
# draw rectangle and set colors
rect = scribus.createRect(h, v, width, height)
scribus.setFillColor(colorname, rect)
# if total amount of color is < 20 draw outline in Black for rectangle, else in same color
if c + m + y + k < 20:
scribus.setLineColor("Black", rect)
else:
scribus.setLineColor(colorname, rect)
# create textbox and insert text
textbox = scribus.createText(h + width + 5, v, 50, height)
# set proper font size
scribus.setFontSize(11, textbox)
scribus.setTextAlignment(scribus.ALIGN_LEFT, textbox)
# load the string into the textbox
scribus.insertText(colorstring, 0, textbox)
def change_text(text, item):
l = scribus.getTextLength(item)
scribus.selectText(0, l, item)
fs = scribus.getFontSize(item)
f = scribus.getFont(item)
scribus.insertText(text, 0, item)
l2 = scribus.getTextLength(item)
scribus.selectText(0, l2, item)
scribus.setFontSize(fs, item)
scribus.setFont(f, item)
scribus.selectText(l2-l, l, item)
scribus.deleteText(item)
scribus.deselectAll()
def trovasostituisci(text_to_find,text_to_replace):
#itero tutti gli oggetti presenti in Scribus
for obj in scribus.getAllObjects():
#ottengo il tipo di oggetto di tutti gli elementi della pagina
obj_type = scribus.getObjectType(obj)
#controllo che il tipo di oggetto scribus sia TextFrame
if obj_type == "TextFrame":
#ottengo il testo contenuto in tutti gli oggetti
obj_text = scribus.getText(obj)
#text_to_find = "_F6%"
#text_to_replace = "123 TESTO SOSTITUITO 123456789"
#cerco la variabile text_to_find
if text_to_find in obj_text:
#se la trovo la sostituisco
text_to_find = obj_text.replace(text_to_find, text_to_replace)
scribus.setText(text_to_find, obj)
scribus.setFontSize(8, obj)
def setPageNumber(self, crds, pageSide, row, pageNumber):
'''Place the page number on the page if called for.'''
if self.pageNumbers:
# Make the page number box
pNumBox = scribus.createText(crds[row]['pageNumXPos' + pageSide],
crds[row]['pageNumYPos'],
crds[row]['pageNumWidth'],
crds[row]['pageNumHeight'])
# Put the page number in it and format according to the page we are on
scribus.setText( ` pageNumber `, pNumBox)
if pageSide == 'Odd':
scribus.setTextAlignment(scribus.ALIGN_RIGHT, pNumBox)
else:
scribus.setTextAlignment(scribus.ALIGN_LEFT, pNumBox)
scribus.setFont(self.fonts['pageNum']['bold'], pNumBox)
scribus.setFontSize(self.fonts['pageNum']['size'], pNumBox)
def fill_page(contacts):
#where contacts is an array or at most max_contact contacts
assert(len(contacts) < MAX_PAGE_CONTACTS)
nb_lines = (len(contacts) / (CONST_COL_NUMBER))
if((len(contacts) % CONST_COL_NUMBER) != 0):
nb_lines = nb_lines+1
for curline in range (0, nb_lines):
nb_col = min(len(contacts) - (curline * CONST_COL_NUMBER), CONST_COL_NUMBER)
for curcol in range (0, nb_col):
x = CONST_TOP_MARGIN + CONST_COL_SIZE * curline
y = CONST_LEFT_MARGIN + CONST_LINE_SIZE * curcol
txtFrameName= "etiketo"+str(curline)+str(curcol)
scribus.createText(y, x, CONST_LINE_SIZE, CONST_COL_SIZE, txtFrameName)
contact_idx=curline*CONST_COL_NUMBER+curcol
scribus.setText(contacts[contact_idx].print_contact(), txtFrameName)
scribus.setTextDistances(6, 0, 3, 0, txtFrameName)
scribus.setFontSize(10, txtFrameName)
scribus.setFont("Liberation Serif Regular", txtFrameName)
def drawColor(colorname, h, v, width,
height): #h horizontal position, v vertical position
"""draws a color chart field with its caption for the given colorname at the h and v position
"""
#get cmyk values and convert them to 0 - 255 values
color = scribus.getColor(colorname)
c = int(round(color[0] / 2.55))
m = int(round(color[1] / 2.55))
y = int(round(color[2] / 2.55))
k = int(round(color[3] / 2.55))
#get rgb color
rgbcolor = scribus.getColorAsRGB(colorname)
r = rgbcolor[0]
g = rgbcolor[1]
b = rgbcolor[2]
#get webcolor
webcolor = rgbhex(r, g, b)
#but String for Textbox together
colorDisplay = colorname
if scribus.isSpotColor(colorname):
colorDisplay += " (Spot Color)"
colorstring = "%s\nC %i, M %i, Y %i, K %i, \nR %i, G %i, B %i \nRGB: %s" % (
colorDisplay, c, m, y, k, r, g, b, webcolor)
#draw rectangle and set colors
rect = scribus.createRect(h, v, width, height)
scribus.setFillColor(colorname, rect)
#if total amount of color is < 20 draw outline in Black for rectangle, else in same color
if c + m + y + k < 20:
scribus.setLineColor("Black", rect)
else:
scribus.setLineColor(colorname, rect)
#create textbox and insert text
textbox = scribus.createText(h + width + 5, v, 50, height)
#set proper font size
scribus.setFontSize(11, textbox)
scribus.setTextAlignment(scribus.ALIGN_LEFT, textbox)
#load the string into the textbox
scribus.insertText(colorstring, 0, textbox)
scribus.setTextColor("Black", textbox)
def fill_page(contacts):
#where contacts is an array or at most max_contact contacts
assert (len(contacts) < MAX_PAGE_CONTACTS)
nb_lines = (len(contacts) / (CONST_COL_NUMBER))
if ((len(contacts) % CONST_COL_NUMBER) != 0):
nb_lines = nb_lines + 1
for curline in range(0, nb_lines):
nb_col = min(
len(contacts) - (curline * CONST_COL_NUMBER), CONST_COL_NUMBER)
for curcol in range(0, nb_col):
x = CONST_TOP_MARGIN + CONST_COL_SIZE * curline
y = CONST_LEFT_MARGIN + CONST_LINE_SIZE * curcol
txtFrameName = "etiketo" + str(curline) + str(curcol)
scribus.createText(y, x, CONST_LINE_SIZE, CONST_COL_SIZE,
txtFrameName)
contact_idx = curline * CONST_COL_NUMBER + curcol
scribus.setText(contacts[contact_idx].print_contact(),
txtFrameName)
scribus.setTextDistances(6, 0, 3, 0, txtFrameName)
scribus.setFontSize(10, txtFrameName)
scribus.setFont("Liberation Serif Regular", txtFrameName)
def slotDoIt(self): nfs = self.val.value() obj = scribus.getSelectedObject(0) t = scribus.getText(obj) scribus.deselectAll() t0 = scribus.getText(obj) fs = scribus.getFontSize(obj) tl = scribus.getTextLength(obj) idx = t0.find(t) + (len(t) / 2) base = fs #print t0 #print t #print "FS %i NFS %i IDX %i START %i" % (fs,nfs,idx,idx - int((nfs - fs) / 0.1)) for i in xrange(max(idx - int((nfs - fs) * 10), 0), idx): scribus.selectText(i, 1, obj) base += 0.1 scribus.setFontSize(base,obj) for i in xrange(idx, min(idx + int((nfs - fs) * 10), tl - 1)): scribus.selectText(i, 1, obj) base -= 0.1 scribus.setFontSize(base,obj) scribus.setRedraw(True) scribus.selectObject(obj)
for infile in filenames:
print("Opening " + infile)
scribus.openDoc(infile)
# Auto-scale the picture
try:
# Find which image object we must change
images = [s for s in scribus.getPageItems() if s[1] == IMG_TYPE]
frame = sorted(images, key=lambda s: s[2])[-1][0]
# frame should be "Image9" if all elements are rendered
scribus.setScaleImageToFrame(True, name=frame)
scribus.saveDoc()
except NoValidObjectError, err:
print("Image not found in " + infile)
# Change the text size if necessary
print(infile)
if infile in files_with_long_text:
print("Found " + infile + "!!!")
try:
frame = "Text7"
scribus.setFontSize(11, frame)
scribus.saveDoc()
except NoValidObjectError, err:
print("Text not found in " + infile)
# Generate the PDF
pdf = scribus.PDFfile()
doc_name = infile.rsplit(".", 1)[0]
pdf.file = doc_name + ".pdf"
print("Saving at " + pdf.file)
pdf.save()
print("Converted %d files" % len(filenames))
for row in data:
#if i > 0 :
#sys.exit(1)
#scribus.messageBox("csv2table", row)
roseid = row[0]
rosenameger = row[1]
rosenamelat = row[2]
#scribus.messageBox("csv2table", roseid+' '+rosenameger+' ('+rosenamelat+')')
#Insert the Right Text into the Right Position
#Write ID into ID Field
scribus.deleteText(idtextstring)
scribus.setText(roseid, idtextstring)
scribus.setFont(idfont, idtextstring)
scribus.setFontSize(idfonSize, idtextstring)
scribus.setTextColor(idtextcolor, idtextstring)
scribus.setTextShade(idtextshade, idtextstring)
#Write German Name into german Name Field
scribus.deleteText(gertextstring)
scribus.setText(rosenameger, gertextstring)
scribus.setFont(gerfont, gertextstring)
scribus.setFontSize(gerfonSize, gertextstring)
scribus.setTextColor(gertextcolor, gertextstring)
scribus.setTextShade(gertextshade, gertextstring)
#Write Latin Name into Latin Name field
scribus.deleteText(lattextstring)
scribus.setText(rosenamelat, lattextstring)
scribus.setFont(latfont, lattextstring)
def generateContent(string, window):
#generates all the elements/only one element
start = 0
end = 0
if string == "all":
#dont include the first line to make the data sort work [1:]
#sort the the elements by date
data = sorted(getCSVdata()[1:],
key=lambda row: dateFun(str.strip(row[5])),
reverse=True)
end = len(data)
print(str(end) + " " + str(start))
print("generating elements from all lines")
window.destroy()
elif RepresentsInt(string):
start = int(string) - 1 #index shifting
end = int(string)
print("only generating line " + string)
data = getCSVdata()
window.destroy()
else:
print(string + " is not a valid value")
print("exiting")
window.destroy()
sys.exit()
if not scribus.haveDoc() > 0: #do we have a doc?
scribus.messageBox("importcvs2table",
"No opened document.\nPlease open one first.")
sys.exit()
userdim = scribus.getUnit() #get unit and change it to mm
scribus.setUnit(scribus.UNIT_MILLIMETERS)
lineWidth = 3.92 #aka 1.383mm, kp warum
rowDate = ""
for i in range(start, end):
rowName = str.strip(data[i][0])
rowCategory = str.strip(data[i][1])
rowDescription = str.strip(data[i][2])
rowPrice = str.strip(data[i][3])
rowPlace = str.strip(data[i][4])
rowDate = str.strip(data[i][5])
rowTime = str.strip(data[i][6])
if rowName == "": #skip empty csv lines
continue
print("add element: " + rowName)
#random values
hpos = 120.0
vpos = 200.0
hposition = 120.0
vposition = 200.0
objectlist = [] #list for all boxes
x = 0 #sets the progress
#create the blue box
print("create the blue line")
blueBox = scribus.createLine(hposition + 1, vposition, hposition + 1,
vposition + 5.863)
scribus.setLineColor("Cyan", blueBox)
scribus.setLineWidth(lineWidth, blueBox)
objectlist.append(blueBox)
scribus.progressSet(x)
x = 1
#create the data character box
#these are the width values for the numbers
zero = 4.608
one = 2.839
two = 4.724
three = 4.393
four = 4.625
five = 4.261
six = 4.278
seven = 4.261
eight = 4.625
nine = 4.708
lenArray = [zero, one, two, three, four, five, six, seven, eight, nine]
marginleft = 1.3
margintop = 0.519 #substract, cause the box is heigher that the blue line
cellwidthright = 10.951
cellHeight = 8.282
hposition = hposition + marginleft + 1
textbox = scribus.createText(hposition, vposition - margintop,
cellwidthright, cellHeight)
scribus.setFont("Quicksand Regular", textbox)
scribus.setFontSize(20.0, textbox)
finalDate = ""
rowDateLength = 0
#checks if the rowDate is from 01-09, in that case remove the zero
if rowDate[0] == '0':
finalDate = rowDate[1]
rowDateLength = lenArray[int(rowDate[1])]
else:
finalDate = rowDate[:2]
rowDateLength = lenArray[int(rowDate[0])] + lenArray[int(
rowDate[1])]
scribus.insertText(finalDate, 0, textbox)
print("day: " + finalDate)
objectlist.append(textbox)
scribus.progressSet(x)
x = 2
#create the month/day box
print("create the box with the day and month")
width = 19.447
height = 8.025
marginleft = rowDateLength #gain that from the calculations above, depends on the width of the rowDate characters
monthBox = scribus.createText(hposition + marginleft + 0.7, vposition,
width, height)
scribus.setFont("Quicksand Regular", monthBox)
scribus.setFontSize(8.5, monthBox)
month = ""
m = rowDate[3:5]
if m == '01':
month = "Januar"
elif m == '02':
month = "Februar"
elif m == '03':
month = "März"
elif m == '04':
month = "April"
elif m == '05':
month = "Mai"
elif m == '06':
month = "Juni"
elif m == '07':
month = "Juli"
elif m == '08':
month = "August"
elif m == '09':
month = "September"
elif m == '10':
month = "Oktober"
elif m == '11':
month = "November"
elif m == '12':
month = "Dezember"
else:
print("cant determine month!")
day = datetime.date(int(rowDate[6:]), int(m),
int(rowDate[:2])).weekday()
dayName = ""
if day == 0:
dayName = "Montag"
elif day == 1:
dayName = "Dienstag"
elif day == 2:
dayName = "Mittwoch"
elif day == 3:
dayName = "Donnerstag"
elif day == 4:
dayName = "Freitag"
elif day == 5:
dayName = "Samstag"
elif day == 6:
dayName = "Sonntag"
else:
print("cant determine day!")
text = month + "\n" + dayName
scribus.setStyle("Kalender_neu_Monat und Tag", monthBox)
scribus.insertText(text, 0, monthBox)
print("month: " + month + " day: " + dayName)
objectlist.append(monthBox)
scribus.progressSet(x)
x = 3
#create the main text box
print("create the main text box")
margintop = 5.5
hpos = hpos - 0.383 #i dont know why but scribus always places the element 0.383 right than it should be :/
mainTextBox = scribus.createText(
hpos, vposition + margintop, 43.0,
45.0) #minus eins weil der blaue balken seinen kasten overflowed
#insert category
print("insert the category: " + rowCategory)
scribus.insertText(rowCategory, 0, mainTextBox)
endCategory = scribus.getTextLength(mainTextBox)
scribus.selectText(0, endCategory, mainTextBox)
scribus.setFontSize(10.5, mainTextBox)
scribus.selectText(0, endCategory, mainTextBox)
scribus.setStyle("Kalender_Eventname", mainTextBox)
#insert main text
print("insert the main text")
scribus.insertText("\n" + rowDescription, endCategory, mainTextBox)
endMainText = scribus.getTextLength(mainTextBox) - endCategory
scribus.selectText(endCategory, endMainText, mainTextBox)
scribus.setStyle("Kalender_Eventbeschreibung", mainTextBox)
#get start length to color everything black and set font size
startAll = scribus.getTextLength(mainTextBox)
createPlaceTimePrice(mainTextBox, "\n| Ort: ", "",
"Kalender_Eventname")
#insert value for place
createPlaceTimePrice(mainTextBox, rowPlace, "Heuristica Regular", "")
#insert time letters
createPlaceTimePrice(mainTextBox, " | Zeit: ", "Quicksand Regular", "")
#insert time value
createPlaceTimePrice(mainTextBox, rowTime, "Heuristica Regular", "")
#insert price letters
createPlaceTimePrice(mainTextBox, " | Eintritt: ", "Quicksand Regular",
"")
#insert price value
createPlaceTimePrice(mainTextBox, rowPrice, "Heuristica Regular", "")
#setFontSize and black color for the whole detail box
endAll = scribus.getTextLength(mainTextBox) - startAll
scribus.selectText(startAll, endAll, mainTextBox)
scribus.setFontSize(8.5, mainTextBox)
scribus.selectText(startAll, endAll, mainTextBox)
scribus.setTextColor("Black", mainTextBox)
objectlist.append(mainTextBox)
scribus.progressSet(x)
#do some generell stuff
scribus.groupObjects(objectlist)
scribus.progressReset()
scribus.setUnit(userdim) # reset unit to previous value
scribus.docChanged(True)
scribus.statusMessage("Done")
scribus.setRedraw(True)
print("done")
return 0
def main(self):
# Load up all the file and record information.
# Use CSV reader to build list of record dicts
records = self.loadCSVData(self.dataFile)
totalRecs = len(records)
# Reality check first to see if we have anything to process
if totalRecs <= 0:
scribus.messageBox('Not Found', 'No records found to process!')
sys.exit()
pageNumber = 1
recCount = 0
row = 0
pageSide = 'Odd'
scribus.progressTotal(totalRecs)
paIndex = {}
lastName = ''
firstName = ''
photoFirstName = ''
verseRef = ''
verseText = ''
# Get the page layout coordinates for this publication
crds = self.getCoordinates(self.dimensions)
# Make a new document to put our records on
if scribus.newDocument(
getattr(scribus, self.dimensions['page']['scribusPageCode']),
(self.dimensions['margins']['left'],
self.dimensions['margins']['right'],
self.dimensions['margins']['top'],
self.dimensions['margins']['bottom']), scribus.PORTRAIT, 1,
scribus.UNIT_POINTS, scribus.NOFACINGPAGES,
scribus.FIRSTPAGERIGHT, 1):
self.setPageNumber(crds, pageSide, row, pageNumber)
while recCount < totalRecs:
# Output a new page on the first row after we have done the first page
if row == 0 and recCount != 0:
scribus.newPage(-1)
if pageSide == 'Odd':
pageSide = 'Even'
else:
pageSide = 'Odd'
self.setPageNumber(crds, pageSide, row, pageNumber)
########### Now set the current record in the current row ##########
# Set the last name
lastName = records[recCount]['NameLast']
# Adjust the NameFirst field to include the spouse if there is one
if records[recCount]['Spouse'] != '':
firstName = records[recCount][
'NameFirst'] + ' & ' + records[recCount]['Spouse']
else:
firstName = records[recCount]['NameFirst']
# Make the photo file name
photoFirstName = firstName.replace('&', '-').replace(
'.', '').replace(' ', '')
# Set our record count for progress display and send a status message
scribus.progressSet(recCount)
scribus.statusMessage('Placing record ' + ` recCount ` +
' of ' + ` totalRecs `)
# Add a watermark if a string is specified
if self.outputWatermark:
self.addWatermark()
# Put the last name element in this row
nameLastBox = scribus.createText(crds[row]['nameLastXPos'],
crds[row]['nameLastYPos'],
crds[row]['nameLastWidth'],
crds[row]['nameLastHeight'])
scribus.setText(lastName, nameLastBox)
scribus.setTextAlignment(scribus.ALIGN_RIGHT, nameLastBox)
scribus.setTextDistances(0, 0, 0, 0, nameLastBox)
scribus.setFont(self.fonts['nameLast']['bold'], nameLastBox)
scribus.setFontSize(self.fonts['nameLast']['size'],
nameLastBox)
scribus.setTextShade(80, nameLastBox)
scribus.rotateObject(90, nameLastBox)
# Place the first name element in this row
nameFirstBox = scribus.createText(crds[row]['nameFirstXPos'],
crds[row]['nameFirstYPos'],
crds[row]['nameFirstWidth'],
crds[row]['nameFirstHeight'])
scribus.setText(records[recCount]['Caption'], nameFirstBox)
scribus.setTextAlignment(scribus.ALIGN_LEFT, nameFirstBox)
scribus.setFont(self.fonts['nameFirst']['boldItalic'],
nameFirstBox)
scribus.setFontSize(self.fonts['nameFirst']['size'],
nameFirstBox)
# Place the image element in this row
# We will need to do some processing on the first pass
# The default output format is JPG
orgImgFileName = records[recCount]['Photo']
orgImgFile = os.path.join(self.orgImgDir, orgImgFileName)
baseImgFileName = lastName + '_' + photoFirstName
if self.willBePngImg:
ext = 'png'
else:
ext = 'jpg'
if not self.rgbColor:
imgFile = os.path.join(
getattr(self, ext + 'ImgDir'),
baseImgFileName + '-gray' + '.' + ext)
else:
imgFile = os.path.join(getattr(self, ext + 'ImgDir'),
baseImgFileName + '.' + ext)
# Process the image now if there is none
if not os.path.exists(imgFile):
self.img_process.sizePic(orgImgFile, imgFile,
self.maxHeight)
# self.img_process.outlinePic(imgFile, imgFile)
self.img_process.scalePic(imgFile, imgFile,
self.imgDensity)
self.img_process.addPoloroidBorder(imgFile, imgFile)
# Color RGB is the default
if not self.rgbColor:
self.img_process.makeGray(imgFile, imgFile)
# Double check the output and substitute with placeholder pic
if not os.path.exists(imgFile):
imgFile = self.placeholderPic
# Create the imageBox and load the picture
imageBox = scribus.createImage(crds[row]['imageXPos'],
crds[row]['imageYPos'],
crds[row]['imageWidth'],
crds[row]['imageHeight'])
if os.path.isfile(imgFile):
scribus.loadImage(imgFile, imageBox)
scribus.setScaleImageToFrame(scaletoframe=1,
proportional=1,
name=imageBox)
# Place the country element in this row (add second one if present)
countryBox = scribus.createText(crds[row]['countryXPos'],
crds[row]['countryYPos'],
crds[row]['countryWidth'],
crds[row]['countryHeight'])
countryLine = records[recCount]['Country1']
try:
if records[recCount]['Country2'] != '':
countryLine = countryLine + ' & ' + records[recCount][
'Country2']
except:
pass
scribus.setText(countryLine, countryBox)
scribus.setTextAlignment(scribus.ALIGN_RIGHT, countryBox)
scribus.setFont(self.fonts['text']['boldItalic'], countryBox)
scribus.setFontSize(self.fonts['text']['size'], countryBox)
# Place the assignment element in this row
assignBox = scribus.createText(crds[row]['assignXPos'],
crds[row]['assignYPos'],
crds[row]['assignWidth'],
crds[row]['assignHeight'])
scribus.setText(self.fixText(records[recCount]['Assignment']),
assignBox)
# Assign style to box
# scribus.createParagraphStyle(name='assignStyle', alignment=0, leftmargin=10, firstindent=-10)
# scribus.setStyle('assignStyle', assignBox)
# Hard formated box
scribus.setTextAlignment(scribus.ALIGN_LEFT, assignBox)
scribus.setFont(self.fonts['text']['italic'], assignBox)
scribus.setFontSize(self.fonts['text']['size'], assignBox)
scribus.setLineSpacing(self.fonts['text']['size'] + 1,
assignBox)
scribus.setTextDistances(4, 0, 0, 0, assignBox)
# Resize the frame height and determine the difference for
# placing the next frame below it
assignHeightNew = self.resizeFrame(assignBox)
assignHeightDiff = crds[row]['assignHeight'] - assignHeightNew
# Place the verse element in this row
verseYPosNew = crds[row]['verseYPos'] - assignHeightDiff
verseBox = scribus.createText(crds[row]['verseXPos'],
verseYPosNew,
crds[row]['verseWidth'],
crds[row]['verseHeight'])
# The verse element may be either a Scripture verse or a prayer request
# If it is Scripture, and it has a verse ref, we want to set that
# seperatly so we need to do a little preprocess on the text to find
# out if it has a ref. This script will only recognize references
# at the end of the string that are enclosed in brackets. See the
# findVerseRef() function for more details
verseRef = self.findVerseRef(records[recCount]['Prayer'])
if verseRef:
verseText = self.removeVerseRef(
self.fixText(records[recCount]['Prayer']))
scribus.setText(verseText, verseBox)
else:
scribus.setText(self.fixText(records[recCount]['Prayer']),
verseBox)
# Can't find a way to set alignment to justified using setTextAlignment()
# scribus.setTextAlignment(scribus.ALIGN_LEFT, verseBox)
# Because of this, we make a style which seems to work
scribus.createParagraphStyle(name='vBoxStyle', alignment=3)
scribus.setStyle('vBoxStyle', verseBox)
scribus.setFont(self.fonts['verse']['regular'], verseBox)
scribus.setFontSize(self.fonts['verse']['size'], verseBox)
scribus.setLineSpacing(self.fonts['verse']['size'] + 1,
verseBox)
scribus.setTextDistances(4, 0, 4, 0, verseBox)
if self.hyphenate:
scribus.hyphenateText(verseBox)
# Get the height difference in case we need to set ref box
verseHeightNew = self.resizeFrame(verseBox)
verseHeightDiff = crds[row]['verseHeight'] - verseHeightNew
if verseRef:
# Set coordinates for this box
vRefBoxX = crds[row]['verseXPos']
vRefBoxY = (verseYPosNew + verseHeightNew)
vRefBoxH = crds[row]['nameFirstHeight'] / 2
vRefBoxW = crds[row]['verseWidth']
verseRefBox = scribus.createText(vRefBoxX, vRefBoxY,
vRefBoxW, vRefBoxH)
scribus.setText(verseRef, verseRefBox)
scribus.setTextAlignment(scribus.ALIGN_RIGHT, verseRefBox)
scribus.setFont(self.fonts['verse']['italic'], verseRefBox)
scribus.setFontSize(self.fonts['verse']['size'] - 2,
verseRefBox)
scribus.setLineSpacing(self.fonts['verse']['size'],
verseRefBox)
scribus.setTextDistances(2, 0, 0, 0, verseRefBox)
# Up our counts
if row >= self.dimensions['rows']['count'] - 1:
row = 0
pageNumber += 1
else:
row += 1
recCount += 1
# Create the index page here
# Output a new page for the index
if row == 0 and recCount != 0:
scribus.newPage(-1)
if pageSide == 'Odd':
pageSide = 'Even'
else:
pageSide = 'Odd'
self.setPageNumber(crds, pageSide, 0, pageNumber)
# Outut the index entries at this point
# for key in paIndex.keys() :
# Report we are done now before we loose focus
scribus.statusMessage('Process Complete!')
###############################################################################
############################## Output Results #################################
###############################################################################
# Now we will output the results to PDF if that is desired
if self.makePdf:
pdfExport = scribus.PDFfile()
pdfExport.info = self.pdfFile
pdfExport.file = self.pdfFile
pdfExport.save()
# View the output if set
if self.makePdf and self.viewPdf:
cmd = ['evince', self.pdfFile]
try:
subprocess.Popen(cmd)
except Exception as e:
result = scribus.messageBox(
'View PDF command failed with: ' + str(e),
scribus.BUTTON_OK)
def main (self) :
# Load up all the file and record information.
# Use CSV reader to build list of record dicts
records = self.loadCSVData(self.dataFile)
totalRecs = len(records)
# Reality check first to see if we have anything to process
if totalRecs <= 0 :
scribus.messageBox('Not Found', 'No records found to process!')
sys.exit()
pageNumber = 1
recCount = 0
row = 0
pageSide = 'Odd'
scribus.progressTotal(totalRecs)
paIndex = {}
lastName = ''
firstName = ''
photoFirstName = ''
verseRef = ''
verseText = ''
# Get the page layout coordinates for this publication
crds = self.getCoordinates(self.dimensions)
# Make a new document to put our records on
if scribus.newDocument(getattr(scribus, self.dimensions['page']['scribusPageCode']),
(self.dimensions['margins']['left'], self.dimensions['margins']['right'], self.dimensions['margins']['top'], self.dimensions['margins']['bottom']),
scribus.PORTRAIT, 1, scribus.UNIT_POINTS, scribus.NOFACINGPAGES,
scribus.FIRSTPAGERIGHT, 1) :
self.setPageNumber(crds, pageSide, row, pageNumber)
while recCount < totalRecs :
# Output a new page on the first row after we have done the first page
if row == 0 and recCount != 0:
scribus.newPage(-1)
if pageSide == 'Odd' :
pageSide = 'Even'
else :
pageSide = 'Odd'
self.setPageNumber(crds, pageSide, row, pageNumber)
########### Now set the current record in the current row ##########
# Set the last name
lastName = records[recCount]['NameLast']
# Adjust the NameFirst field to include the spouse if there is one
if records[recCount]['Spouse'] != '' :
firstName = records[recCount]['NameFirst'] + ' & ' + records[recCount]['Spouse']
else :
firstName = records[recCount]['NameFirst']
# Make the photo file name
photoFirstName = firstName.replace('&', '-').replace('.', '').replace(' ', '')
# Set our record count for progress display and send a status message
scribus.progressSet(recCount)
scribus.statusMessage('Placing record ' + `recCount` + ' of ' + `totalRecs`)
# Add a watermark if a string is specified
if self.outputWatermark :
self.addWatermark()
# Put the last name element in this row
nameLastBox = scribus.createText(crds[row]['nameLastXPos'], crds[row]['nameLastYPos'], crds[row]['nameLastWidth'], crds[row]['nameLastHeight'])
scribus.setText(lastName, nameLastBox)
scribus.setTextAlignment(scribus.ALIGN_RIGHT, nameLastBox)
scribus.setTextDistances(0, 0, 0, 0, nameLastBox)
scribus.setFont(self.fonts['nameLast']['bold'], nameLastBox)
scribus.setFontSize(self.fonts['nameLast']['size'], nameLastBox)
scribus.setTextShade(80, nameLastBox)
scribus.rotateObject(90, nameLastBox)
# Place the first name element in this row
nameFirstBox = scribus.createText(crds[row]['nameFirstXPos'], crds[row]['nameFirstYPos'], crds[row]['nameFirstWidth'], crds[row]['nameFirstHeight'])
scribus.setText(records[recCount]['Caption'], nameFirstBox)
scribus.setTextAlignment(scribus.ALIGN_LEFT, nameFirstBox)
scribus.setFont(self.fonts['nameFirst']['boldItalic'], nameFirstBox)
scribus.setFontSize(self.fonts['nameFirst']['size'], nameFirstBox)
# Place the image element in this row
# We will need to do some processing on the first pass
# The default output format is JPG
orgImgFileName = records[recCount]['Photo']
orgImgFile = os.path.join(self.orgImgDir, orgImgFileName)
baseImgFileName = lastName + '_' + photoFirstName
if self.willBePngImg :
ext = 'png'
else :
ext = 'jpg'
if not self.rgbColor :
imgFile = os.path.join(getattr(self, ext + 'ImgDir'), baseImgFileName + '-gray' + '.' + ext)
else :
imgFile = os.path.join(getattr(self, ext + 'ImgDir'), baseImgFileName + '.' + ext)
# Process the image now if there is none
if not os.path.exists(imgFile) :
self.img_process.sizePic(orgImgFile, imgFile, self.maxHeight)
# self.img_process.outlinePic(imgFile, imgFile)
self.img_process.scalePic(imgFile, imgFile, self.imgDensity)
self.img_process.addPoloroidBorder(imgFile, imgFile)
# Color RGB is the default
if not self.rgbColor :
self.img_process.makeGray(imgFile, imgFile)
# Double check the output and substitute with placeholder pic
if not os.path.exists(imgFile) :
imgFile = self.placeholderPic
# Create the imageBox and load the picture
imageBox = scribus.createImage(crds[row]['imageXPos'], crds[row]['imageYPos'], crds[row]['imageWidth'], crds[row]['imageHeight'])
if os.path.isfile(imgFile) :
scribus.loadImage(imgFile, imageBox)
scribus.setScaleImageToFrame(scaletoframe=1, proportional=1, name=imageBox)
# Place the country element in this row (add second one if present)
countryBox = scribus.createText(crds[row]['countryXPos'], crds[row]['countryYPos'], crds[row]['countryWidth'], crds[row]['countryHeight'])
countryLine = records[recCount]['Country1']
try :
if records[recCount]['Country2'] != '' :
countryLine = countryLine + ' & ' + records[recCount]['Country2']
except :
pass
scribus.setText(countryLine, countryBox)
scribus.setTextAlignment(scribus.ALIGN_RIGHT, countryBox)
scribus.setFont(self.fonts['text']['boldItalic'], countryBox)
scribus.setFontSize(self.fonts['text']['size'], countryBox)
# Place the assignment element in this row
assignBox = scribus.createText(crds[row]['assignXPos'], crds[row]['assignYPos'], crds[row]['assignWidth'], crds[row]['assignHeight'])
scribus.setText(self.fixText(records[recCount]['Assignment']), assignBox)
# Assign style to box
# scribus.createParagraphStyle(name='assignStyle', alignment=0, leftmargin=10, firstindent=-10)
# scribus.setStyle('assignStyle', assignBox)
# Hard formated box
scribus.setTextAlignment(scribus.ALIGN_LEFT, assignBox)
scribus.setFont(self.fonts['text']['italic'], assignBox)
scribus.setFontSize(self.fonts['text']['size'], assignBox)
scribus.setLineSpacing(self.fonts['text']['size'] + 1, assignBox)
scribus.setTextDistances(4, 0, 0, 0, assignBox)
# Resize the frame height and determine the difference for
# placing the next frame below it
assignHeightNew = self.resizeFrame(assignBox)
assignHeightDiff = crds[row]['assignHeight'] - assignHeightNew
# Place the verse element in this row
verseYPosNew = crds[row]['verseYPos'] - assignHeightDiff
verseBox = scribus.createText(crds[row]['verseXPos'], verseYPosNew, crds[row]['verseWidth'], crds[row]['verseHeight'])
# The verse element may be either a Scripture verse or a prayer request
# If it is Scripture, and it has a verse ref, we want to set that
# seperatly so we need to do a little preprocess on the text to find
# out if it has a ref. This script will only recognize references
# at the end of the string that are enclosed in brackets. See the
# findVerseRef() function for more details
verseRef = self.findVerseRef(records[recCount]['Prayer'])
if verseRef :
verseText = self.removeVerseRef(self.fixText(records[recCount]['Prayer']))
scribus.setText(verseText, verseBox)
else :
scribus.setText(self.fixText(records[recCount]['Prayer']), verseBox)
# Can't find a way to set alignment to justified using setTextAlignment()
# scribus.setTextAlignment(scribus.ALIGN_LEFT, verseBox)
# Because of this, we make a style which seems to work
scribus.createParagraphStyle(name='vBoxStyle', alignment=3)
scribus.setStyle('vBoxStyle', verseBox)
scribus.setFont(self.fonts['verse']['regular'], verseBox)
scribus.setFontSize(self.fonts['verse']['size'], verseBox)
scribus.setLineSpacing(self.fonts['verse']['size'] + 1, verseBox)
scribus.setTextDistances(4, 0, 4, 0, verseBox)
if self.hyphenate :
scribus.hyphenateText(verseBox)
# Get the height difference in case we need to set ref box
verseHeightNew = self.resizeFrame(verseBox)
verseHeightDiff = crds[row]['verseHeight'] - verseHeightNew
if verseRef :
# Set coordinates for this box
vRefBoxX = crds[row]['verseXPos']
vRefBoxY = (verseYPosNew + verseHeightNew)
vRefBoxH = crds[row]['nameFirstHeight'] / 2
vRefBoxW = crds[row]['verseWidth']
verseRefBox = scribus.createText(vRefBoxX, vRefBoxY, vRefBoxW, vRefBoxH)
scribus.setText(verseRef, verseRefBox)
scribus.setTextAlignment(scribus.ALIGN_RIGHT, verseRefBox)
scribus.setFont(self.fonts['verse']['italic'], verseRefBox)
scribus.setFontSize(self.fonts['verse']['size'] - 2, verseRefBox)
scribus.setLineSpacing(self.fonts['verse']['size'], verseRefBox)
scribus.setTextDistances(2, 0, 0, 0, verseRefBox)
# Up our counts
if row >= self.dimensions['rows']['count'] - 1 :
row = 0
pageNumber +=1
else :
row +=1
recCount +=1
# Create the index page here
# Output a new page for the index
if row == 0 and recCount != 0:
scribus.newPage(-1)
if pageSide == 'Odd' :
pageSide = 'Even'
else :
pageSide = 'Odd'
self.setPageNumber(crds, pageSide, 0, pageNumber)
# Outut the index entries at this point
# for key in paIndex.keys() :
# Report we are done now before we loose focus
scribus.statusMessage('Process Complete!')
###############################################################################
############################## Output Results #################################
###############################################################################
# Now we will output the results to PDF if that is desired
if self.makePdf :
pdfExport = scribus.PDFfile()
pdfExport.info = self.pdfFile
pdfExport.file = self.pdfFile
pdfExport.save()
# View the output if set
if self.makePdf and self.viewPdf :
cmd = ['evince', self.pdfFile]
try :
subprocess.Popen(cmd)
except Exception as e :
result = scribus.messageBox ('View PDF command failed with: ' + str(e), scribus.BUTTON_OK)
def main(argv):
scribus.setUnit(scribus.UNIT_MILLIMETERS)
# get page size
pagesize = scribus.getPageSize()
###########################################
# size and position of the exit buttons
linksize = pagesize[0] / 30
linkpos = pagesize[0] - linksize - 2
# set up exit to page
pagenum = scribus.pageCount()
exittopage = scribus.valueDialog(
"Exit to page",
"Exit buttons should go to page (1-" + str(pagenum) + ") :", "1")
#error
#if exittopage > pagenum:
# scribus.messageBox("Error", "This page doesn't exist.")
# sys.exit()
# get active layer, create new layer for exit buttons, set it as active
activelayer = scribus.getActiveLayer()
scribus.createLayer("Exitbuttons")
scribus.setActiveLayer("Exitbuttons")
#progressbar max
scribus.progressTotal(pagenum)
# iterate through all the pages
page = 1
while (page <= pagenum):
#messagebar text
scribus.messagebarText("Create exit buttons...")
scribus.progressSet(page)
scribus.gotoPage(page)
# create rectangle
exitrect = scribus.createRect(linkpos, 2, linksize, linksize,
"exitrect" + str(page))
scribus.setFillColor("White", exitrect)
# create text in rectangle
exittext = scribus.createText(linkpos, 4, linksize, linksize,
"exittext" + str(page))
scribus.setText("X", exittext)
scribus.setFontSize(20, exittext)
scribus.setTextAlignment(1, exittext)
# create link annotation
exitlink = scribus.createText(linkpos, 2, linksize, linksize,
"exitlink" + str(page))
#setLinkAnnotation(page,x,y,["name"])
scribus.setLinkAnnotation(int(exittopage), 0, 0, exitlink)
# add page number to iteration
page += 1
# go back to active layer
scribus.setActiveLayer(activelayer)
# scribus.openDoc(os.path.dirname(os.path.realpath(__file__)) + '/cards.sla')
# scribus.openDoc(os.path.dirname(os.path.realpath(sys.argv[0])) + '/cards.sla')
scribus.messageBox("Error", "You should first open the cards.sla file", ICON_WARNING, BUTTON_OK)
sys.exit(1)
# for page in range(2, scribus.pageCount()) :
# scribus.messageBox("Error", str(scribus.pageCount()), ICON_WARNING, BUTTON_OK)
for page in range(scribus.pageCount(), 1, -1) :
scribus.deletePage(page)
for project in projects :
scribus.newPage(-1, project['section'])
# title: x=10 y=10 w=85mm h=20
# description: x=10 y=40 w=85mm h=80
titleFrame = scribus.createText(10, 10, 85, 20)
scribus.setText(project['title'], titleFrame)
scribus.setStyle('title', titleFrame)
descriptionFrame = scribus.createText(10, 40, 85, 80)
scribus.setText(project['description'], descriptionFrame)
scribus.setStyle('description', descriptionFrame)
# shrink the title and text size if it does not fit in the frame
while scribus.textOverflows(titleFrame) != 0 :
fontSize = scribus.getFontSize(titleFrame)
scribus.setFontSize(fontSize - 1, titleFrame)
while scribus.textOverflows(descriptionFrame) != 0 :
fontSize = scribus.getFontSize(descriptionFrame)
scribus.setFontSize(fontSize - 1, descriptionFrame)
def funzioneprincipale(csvData):
for line in csvData:
i = 0
listacompleta=[]
while i < len(line):
listacompleta.append(line[i])
#scribus.messageBox('Scribus - Messaggio di test', str(line[i]), scribus.ICON_WARNING, scribus.BUTTON_OK)
i = i + 1
if scribus.haveDoc():
#scribus.messageBox('Scribus - Messaggio di test', str(listacompleta), scribus.ICON_WARNING, scribus.BUTTON_OK)
#scribus.newDoc(scribus.PAPER_LETTER, (20,20,20,20),scribus.PORTRAIT, 1, scribus.UNIT_POINTS, scribus.NOFACINGPAGES, scribus.FIRSTPAGERIGHT)
#variabili
pos_footer_x = 43
pos_y = 521
width1 = 330
width2 = 90
height = 26
max_height = 710
max_width = 520
interlinea = 12.5
margin_sx = 3.5
margin_dx = 3.5
margin_up = 3.5
margin_down = 2
font_size = 8
# primo numero da inserire dopo %VAR_F
n = 6
num_col = 3
width3 = width1 + width2
#ciclo tutte le righe del csv
for i in range(1, len(csvData)):
#scribus.messageBox('Scribus - Messaggio di test', str(len(csvData[i])), scribus.ICON_WARNING, scribus.BUTTON_OK)
pos_x = 43
#colonne
for j in range(3, len(csvData[i])):
#creo la variabile pos_footer, che contiene la nuova posizione della y
#che verrà assegnata alla cornice di testo chiamata 'footer'
while (pos_x <= max_width):
#creazione di 3 colonne con dimensioni diverse
# la prima ha larghezza pari a variabile width1
# la seconda e la terza hanno la larghezza pari a width2
if (pos_x <= width1):
nometxtbox = "Cella: I=%d, Pos_x=%d, Pos_y=%d" % (i, pos_x, pos_y)
cell_label = csvData[i][j]
scribus.createText(pos_x, pos_y, width1, height, nometxtbox)
scribus.createRect(pos_x, pos_y, width1, height)
scribus.setText(cell_label, nometxtbox)
#scribus.setText("Testo di pcsvDataa","Testo1")
#comando per creare una cornice di testo
#modifico la dimensione del testo
scribus.setFontSize(font_size, nometxtbox)
#modifico i margini (sx, dx, alto, basso)
scribus.setTextDistances(margin_sx, margin_dx, margin_up, margin_down, nometxtbox)
#modifico l’interlinea
scribus.setLineSpacing(interlinea,nometxtbox)
j = j + 1
pos_x = pos_x + width1
#n = n + 1
elif (pos_x <= width3):
nometxtbox = "Cella: I=%d, Pos_x=%d, Pos_y=%d" % (i, pos_x, pos_y)
cell_label = csvData[i][j]
scribus.createText(pos_x, pos_y, width2, height, nometxtbox)
scribus.createRect(pos_x, pos_y, width2, height)
scribus.setText(cell_label, nometxtbox)
#Allineo il testo al centro
scribus.setTextAlignment(scribus.ALIGN_CENTERED, nometxtbox)
scribus.setFontSize(font_size, nometxtbox)
scribus.setTextDistances(margin_sx, margin_dx, margin_up, margin_down, nometxtbox)
scribus.setLineSpacing(interlinea,nometxtbox)
j = j + 1
pos_x = pos_x + width2
#n = n + 1
else:
nometxtbox = "Cella: I=%d, Pos_x=%d, Pos_y=%d" % (i, pos_x, pos_y)
cell_label = csvData[i][j]
scribus.createText(pos_x, pos_y, width2, height, nometxtbox)
scribus.createRect(pos_x, pos_y, width2, height)
scribus.setText(cell_label, nometxtbox)
#Allineo il testo al centro
scribus.setTextAlignment(scribus.ALIGN_CENTERED, nometxtbox)
scribus.setFontSize(font_size, nometxtbox)
scribus.setTextDistances(margin_sx, margin_dx, margin_up, margin_down, nometxtbox)
scribus.setLineSpacing(interlinea,nometxtbox)
j = j + 1
pos_x = pos_x + width2
#n = n + 1
if pos_y >= max_height:
#crea una nuova pagina se la variabile pos_y raggiunge la dimensione
#massima prestabilita
scribus.newPage(-1)
pos_y = height + 20
else:
pos_y = pos_y + height
#Salvo il documento attivo altrimenti
#lo script ScribusGenerator non inserisce la tabella appena creata
pos_footer_y = pos_y + height + 5
scribus.moveObjectAbs(pos_footer_x, pos_footer_y,"footer")
scribus.saveDoc()
else:
scribus.messageBox('Alert di errore', "Devi avere una pagina Scribus aperta!!!", scribus.ICON_WARNING, scribus.BUTTON_OK)
scribus.newDoc(scribus.PAPER_LETTER, (20,20,20,20),scribus.PORTRAIT, 1, scribus.UNIT_POINTS, scribus.NOFACINGPAGES, scribus.FIRSTPAGERIGHT)
#per importare uno script copiarlo nella cartella: C:\Python27\Lib\site-packages
#Ottenere testo da textbox
#a=scribus.getText(nometextbox)
#mostrare msgbox
#scribus.messageBox('Scribus - Messaggio di test', a, scribus.ICON_WARNING, scribus.BUTTON_OK)
import sys try: import scribus except ImportError: print "This script only works from within Scribus" sys.exit(1) obj = scribus.getSelectedObject(0) sdir = 1 # options fs = 8 fsmax = 14 fsmin = 8 inc = 0.0005 ### tl = scribus.getTextLength() for c in range(tl - 1): scribus.selectText(c, 1, obj) if(sdir == 1): fs += inc if(fs > fsmax): sdir = 0 else: fs -= inc if(fs < fsmin): sdir = 1 scribus.setFontSize(fs,obj)
distros.keys().sort()
for distro in sorted(distros.iterkeys()):
# extract the dictionary content
description = distros[distro][0]
filesizeiso = distros[distro][1]
md5sum = distros[distro][2]
modified = distros[distro][3]
# create page title/header
B = scribus.createText(left_page_x, 10, 100, 10)
scribus.setText(distro, B)
scribus.setFont("Gentium Plus Compact Regular", B)
scribus.setTextAlignment(scribus.ALIGN_LEFT, B)
scribus.setFontSize(18, B)
# load small-logo into page
imagedir = "./logos/"
f = scribus.createImage(left_page_x, 23, 65, 65)
scribus.loadImage(imagedir + distro + ".png", f)
scribus.setScaleImageToFrame(1,1,f)
scribus.sentToLayer("textlayer", f)
# get description text for each distro
scribus.createText(left_page_x, 92, 120, 80,distro)
scribus.setText(description, distro)
scribus.setLineSpacing(12,distro)
linespacing = scribus.getLineSpacing(distro)
scribus.setFont("Gentium Plus Compact Regular", distro)
scribus.setTextAlignment(scribus.ALIGN_LEFT, distro)
pageY = 11
scribus.defineColor("gray",21,21,21,21)
scribus.newDocument((pageX, pageY), (0.0, 0.0, 0.0, 0.0), scribus.LANDSCAPE, 1, scribus.UNIT_INCHES, scribus.PAGE_1, 0, 1)
#0,13 for final
for x in range(0,13):
#1,12,6 for final
for y in range(1,12,6):
rx = x
ry = y
for zx in range(0,2):
for zy in range(0,3):
a = scribus.createText(2.25+((zx+0)*(pageX/1.55)), 0.75+(zy*(pageY/3.84)), 1.25, 0.25)
scribus.setFont('Arial Regular',a)
scribus.setFontSize(12, a)
scribus.setTextColor("gray", a)
scribus.setTextAlignment(scribus.ALIGN_CENTERED, a)
scribus.rotateObject(180, a);
rxy = rx-ry
scribus.insertText('%(rx)d - %(ry)d = %(rxy)d' % locals(), 0, a)
q = scribus.createText(1.0+((zx+0)*(pageX/1.55)), 1.125+(zy*(pageY/3.84)), 4, 1)
scribus.setFont('Arial Regular',q)
scribus.setFontSize(55, q)
scribus.setTextAlignment(scribus.ALIGN_CENTERED, q)
scribus.insertText('%(rx)d + %(ry)d =' % locals(), 0, q)
ry = ry + 1
l = scribus.createLine(0.0,2.833333,11,2.833333)
scribus.setLineColor("gray", l)
layercount].elements[elementcount].position.x - (
size_x / 2)
y_pos = albumdata.pages[pagenum].layers[
layercount].elements[elementcount].position.y - (
size_y / 2)
#This is the kind of text defined within the "text" label
#<p style=\"text-align: left;\"><span style=\"color:#000000;font-family: Calibri; font-size: 2.82mm;\">Cataratas de Iguazú (Argentina) 27/11/2016</span></p>\n
caption_text = ""
parser.feed(albumdata.pages[pagenum].layers[layercount].
elements[elementcount].text)
#print "caption_text : " + caption_text
captionBox = scribus.createText(x_pos, y_pos, size_x,
size_y)
scribus.setText(caption_text, captionBox)
#scribus.setFont("Copper Std", captionBox)
scribus.setFontSize(fontsize, captionBox)
#The following are defined within the element attributes, but they don't seem to be used. The fonts are rather taken from the html info within the "text" attribute
#scribus.setFont(albumdata.pages[pagenum].layers[layercount].elements[elementcount].font.family, captionBox)
#scribus.setFontSize(albumdata.pages[pagenum].layers[layercount].elements[elementcount].font.size, captionBox)
rotation = -albumdata.pages[pagenum].layers[
layercount].elements[elementcount].rotation % (2 *
math.pi)
if rotation > 0.5:
# https://stackoverflow.com/questions/34372480/rotate-point-about-another-point-in-degrees-python
# Scribus by default rotates the text box over the upper leftmost corner, while myphotobook uses the center point.
# Therefore, I use the function in the above site to translate the frame after rotation
# It works for most of our rotated text (upside down, as in the album spine) but sometimes not in the straight horizontal text
# ox, oy = origin
ox, oy = 0, 0
# px, py = point
px, py = size_x / 2, size_y / 2
def funzioneprincipale(csvData): # def funzioneprincipale(row,headerRow):
# scribus.messageBox('Scribus - Messaggio di test', str(row), scribus.ICON_WARNING, scribus.BUTTON_OK)
# scribus.messageBox('Scribus - Messaggio di test', str(headerRow), scribus.ICON_WARNING, scribus.BUTTON_OK)
# scribus.messageBox('Scribus - Messaggio di test', str(csvData), scribus.ICON_WARNING, scribus.BUTTON_OK)
if scribus.haveDoc():
# scribus.newDoc(scribus.PAPER_LETTER, (20,20,20,20),scribus.PORTRAIT, 1, scribus.UNIT_POINTS, scribus.NOFACINGPAGES, scribus.FIRSTPAGERIGHT)
# Dichiaro variabili e costanti
# le COSTANTI sono quelle in maiuscolo
POS_X_FOOTER = 43
WIDTH1 = 330
WIDTH2 = 90
HEIGHT = 26
MAX_HEIGHT = 710
# max_width = 520
INTERLINEA = 12.5
MARGIN_SX = 3.5
MARGIN_DX = 3.5
MARGIN_UP = 3.5
MARGIN_DOWN = 2
FONT_SIZE = 8
NUM_COL = 3
# primo numero da inserire dopo %VAR_F
# n = 6
# Riga di partenza del csv, da cui inizio a creare la tabella
ROW_START = 1
# Colonna di partenza, da cui creare la tabella
COL_START = 3
# variabili in minuscolo
pos_y = 521
# ciclo tutte le righe del csv
for i in range(ROW_START, len(csvData)):
# creo la variabile pos_footer, che contiene la nuova posizione della y
# che verrà assegnata alla cornice di testo chiamata 'footer'
pos_x = 43
for j in range(COL_START, len(csvData[i])):
# i è la riga attuale del csv
# j è la colonna attuale del csv
# cur_col è la colonna attuale nella pagina
cur_col = j % NUM_COL
cur_width = WIDTH1
if cur_col == 0: # and pos_x <= pos_x:
# a capo ogni num_col celle
# pos_y = pos_y + height
pos_x = 43
if pos_y >= MAX_HEIGHT:
# crea una nuova pagina se la variabile pos_y raggiunge la dimensione
# massima prestabilita
scribus.newPage(-1)
pos_y = HEIGHT + 20
else:
pos_y = pos_y + HEIGHT
if cur_col == 1 or cur_col == 2:
cur_width = WIDTH2
nometxtbox = "Cella: csvrow=%d, row=%d, col=%d" % (i, pos_y, pos_x)
# cell_label = "%VAR_F" + str(n) + "%"
cell_label = csvData[i][j]
scribus.createText(pos_x, pos_y, cur_width, HEIGHT, nometxtbox)
scribus.createRect(pos_x, pos_y, cur_width, HEIGHT)
scribus.setText(cell_label, nometxtbox)
# modifico la dimensione del testo
scribus.setFontSize(FONT_SIZE, nometxtbox)
# modifico i margini (sx, dx, alto, basso)
scribus.setTextDistances(MARGIN_SX, MARGIN_DX, MARGIN_UP, MARGIN_DOWN, nometxtbox)
# modifico l’interlinea
scribus.setLineSpacing(INTERLINEA, nometxtbox)
pos_x = pos_x + cur_width
# n=n+1
pos_footer = pos_y + HEIGHT + 5
scribus.moveObjectAbs(POS_X_FOOTER, pos_footer, "footer")
# Salvo il documento attivo altrimenti
# lo script ScribusGenerator non inserisce la tabella appena creata
# scribus.messageBox('Scribus - Messaggio di test', str(cell_label), scribus.ICON_WARNING, scribus.BUTTON_OK)
scribus.saveDoc()
else:
scribus.messageBox(
"Alert di errore", "Devi avere una pagina Scribus aperta!!!", scribus.ICON_WARNING, scribus.BUTTON_OK
)
scribus.newDoc(
scribus.PAPER_LETTER,
(20, 20, 20, 20),
scribus.PORTRAIT,
1,
scribus.UNIT_POINTS,
scribus.NOFACINGPAGES,
scribus.FIRSTPAGERIGHT,
)
offsetY = 0.15
minResultA = 0
maxResultA = 14
minResultB = 1
maxResultB = 3
rx = [[0 for col in range(100)] for row in range(100)]
ry = [[0 for col in range(100)] for row in range(100)]
scribus.newDocument((pageX, pageY), (0.0, 0.0, 0.0, 0.0), scribus.PORTRAIT, 1, scribus.UNIT_INCHES, scribus.PAGE_1, 0, 1)
scribus.defineColor("gray",21,21,21,21)
for x in range(0,maxX):
for y in range(0,maxY):
q = scribus.createText((x*((pageX*0.9)/maxX))+offsetX, (y*(pageY/maxY))+offsetY, (pageX*0.9)/maxX, pageY/maxY)
scribus.setFont('Arial Regular',q)
scribus.setFontSize(48, q)
if random.randint(0, 1) == 0:
rx[x][y] = random.randint(minResultB, maxResultB)
ry[x][y] = random.randint(minResultA, maxResultA)
else:
rx[x][y] = random.randint(minResultA, maxResultA)
ry[x][y] = random.randint(minResultB, maxResultB)
rxx = rx[x][y]
ryy = ry[x][y]
scribus.insertText('%(rxx)d + %(ryy)d =__' % locals(), 0, q)
scribus.newPage(-1)
xx = 0
for x in range(maxX-1,-1,-1):
for y in range(0,maxY):
q = scribus.createText((xx*((pageX/6)/maxX))+offsetXX, (y*(pageY/maxY))+offsetY, (pageX/6)/maxX, pageY/maxY)
scribus.setFont('Arial Regular',q)
