def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(4 if TICI else 3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'
] if SIMULATION else None
self.sm = messaging.SubMaster([
'deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan',
'liveLocationKalman', 'roadCameraState', 'driverCameraState',
'managerState', 'liveParameters', 'radarState'
],
ignore_alive=ignore)
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one pandaState and one CAN packet
hw_type = messaging.recv_one(
self.sm.sock['pandaState']).pandaState.pandaType
has_relay = hw_type in [
PandaType.blackPanda, PandaType.uno, PandaType.dos
]
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'],
has_relay)
# read params
params = Params()
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
community_feature_toggle = params.get_bool("CommunityFeaturesToggle")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
# scc smoother
self.is_cruise_enabled = False
self.cruiseVirtualMaxSpeed = 0
self.clu_speed_ms = 0.
self.apply_accel = 0.
self.fused_accel = 0.
self.lead_drel = 0.
self.aReqValue = 0.
self.aReqValueMin = 0.
self.aReqValueMax = 0.
self.angle_steers_des = 0.
self.sm['liveCalibration'].calStatus = Calibration.CALIBRATED
self.sm['deviceState'].freeSpacePercent = 100
self.sm['driverMonitoringState'].events = []
self.sm['driverMonitoringState'].awarenessStatus = 1.
self.sm['driverMonitoringState'].faceDetected = False
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized,
controller_available, hw_type)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
class Controls(object):
def __init__(self, gctx, rate=100):
self.rate = rate
# *** log ***
context = zmq.Context()
# pub
self.live100 = messaging.pub_sock(context,
service_list['live100'].port)
self.carstate = messaging.pub_sock(context,
service_list['carState'].port)
self.carcontrol = messaging.pub_sock(context,
service_list['carControl'].port)
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
# sub
self.thermal = messaging.sub_sock(context,
service_list['thermal'].port)
self.health = messaging.sub_sock(context, service_list['health'].port)
logcan = messaging.sub_sock(context, service_list['can'].port)
self.cal = messaging.sub_sock(context,
service_list['liveCalibration'].port)
self.CC = car.CarControl.new_message()
self.CI, self.CP = get_car(logcan, sendcan)
self.PL = Planner(self.CP)
self.AM = AlertManager()
self.LoC = LongControl()
self.LaC = LatControl()
self.VM = VehicleModel(self.CP)
# write CarParams
params = Params()
params.put("CarParams", self.CP.to_bytes())
# fake plan
self.plan_ts = 0
self.plan = log.Plan.new_message()
self.plan.lateralValid = False
self.plan.longitudinalValid = False
# controls enabled state
self.enabled = False
self.last_enable_request = 0
# learned angle offset
self.angle_offset = 0
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
self.angle_offset = calibration_params["angle_offset"]
except (ValueError, KeyError):
pass
# rear view camera state
self.rear_view_toggle = False
self.rear_view_allowed = (params.get("IsRearViewMirror") == "1")
self.v_cruise_kph = 255
# 0.0 - 1.0
self.awareness_status = 1.0
self.soft_disable_timer = None
self.overtemp = False
self.free_space = 1.0
self.cal_status = Calibration.UNCALIBRATED
self.cal_perc = 0
self.rk = Ratekeeper(self.rate, print_delay_threshold=2. / 1000)
def data_sample(self):
self.prof = Profiler()
self.cur_time = sec_since_boot()
# first read can and compute car states
self.CS = self.CI.update()
self.prof.checkpoint("CarInterface")
# *** thermal checking logic ***
# thermal data, checked every second
td = messaging.recv_sock(self.thermal)
if td is not None:
# Check temperature.
self.overtemp = any(t > 950
for t in (td.thermal.cpu0, td.thermal.cpu1,
td.thermal.cpu2, td.thermal.cpu3,
td.thermal.mem, td.thermal.gpu))
# under 15% of space free
self.free_space = td.thermal.freeSpace
# read calibration status
cal = messaging.recv_sock(self.cal)
if cal is not None:
self.cal_status = cal.liveCalibration.calStatus
self.cal_perc = cal.liveCalibration.calPerc
def state_transition(self):
pass # for now
def state_control(self):
# did it request to enable?
enable_request, enable_condition = False, False
# reset awareness status on steering
if self.CS.steeringPressed or not self.enabled:
self.awareness_status = 1.0
elif self.enabled:
# gives the user 6 minutes
self.awareness_status -= 1.0 / (self.rate * AWARENESS_TIME)
if self.awareness_status <= 0.:
self.AM.add("driverDistracted", self.enabled)
elif self.awareness_status <= AWARENESS_PRE_TIME / AWARENESS_TIME and \
self.awareness_status >= (AWARENESS_PRE_TIME - 0.1) / AWARENESS_TIME:
self.AM.add("preDriverDistracted", self.enabled)
# handle button presses
for b in self.CS.buttonEvents:
print b
# button presses for rear view
if b.type == "leftBlinker" or b.type == "rightBlinker":
if b.pressed and self.rear_view_allowed:
self.rear_view_toggle = True
else:
self.rear_view_toggle = False
if b.type == "altButton1" and b.pressed:
self.rear_view_toggle = not self.rear_view_toggle
if not self.CP.enableCruise and self.enabled and not b.pressed:
if b.type == "accelCruise":
self.v_cruise_kph -= (self.v_cruise_kph %
V_CRUISE_DELTA) - V_CRUISE_DELTA
elif b.type == "decelCruise":
self.v_cruise_kph -= (self.v_cruise_kph %
V_CRUISE_DELTA) + V_CRUISE_DELTA
self.v_cruise_kph = clip(self.v_cruise_kph, V_CRUISE_MIN,
V_CRUISE_MAX)
if not self.enabled and b.type in ["accelCruise", "decelCruise"
] and not b.pressed:
enable_request = True
# do disable on button down
if b.type == "cancel" and b.pressed:
self.AM.add("disable", self.enabled)
self.prof.checkpoint("Buttons")
# *** health checking logic ***
hh = messaging.recv_sock(self.health)
if hh is not None:
# if the board isn't allowing controls but somehow we are enabled!
# TODO: this should be in state transition with a function follower logic
if not hh.health.controlsAllowed and self.enabled:
self.AM.add("controlsMismatch", self.enabled)
# disable if the pedals are pressed while engaged, this is a user disable
if self.enabled:
if self.CS.gasPressed or self.CS.brakePressed or not self.CS.cruiseState.available:
self.AM.add("disable", self.enabled)
# it can happen that car cruise disables while comma system is enabled: need to
# keep braking if needed or if the speed is very low
# TODO: for the Acura, cancellation below 25mph is normal. Issue a non loud alert
if self.CP.enableCruise and not self.CS.cruiseState.enabled and \
(self.CC.brake <= 0. or self.CS.vEgo < 0.3):
self.AM.add("cruiseDisabled", self.enabled)
if enable_request:
# check for pressed pedals
if self.CS.gasPressed or self.CS.brakePressed:
self.AM.add("pedalPressed", self.enabled)
enable_request = False
else:
print "enabled pressed at", self.cur_time
self.last_enable_request = self.cur_time
# don't engage with less than 15% free
if self.free_space < 0.15:
self.AM.add("outOfSpace", self.enabled)
enable_request = False
if self.CP.enableCruise:
enable_condition = ((self.cur_time - self.last_enable_request) <
0.2) and self.CS.cruiseState.enabled
else:
enable_condition = enable_request
if self.CP.enableCruise and self.CS.cruiseState.enabled:
self.v_cruise_kph = self.CS.cruiseState.speed * CV.MS_TO_KPH
self.prof.checkpoint("AdaptiveCruise")
# *** what's the plan ***
plan_packet = self.PL.update(self.CS, self.LoC)
self.plan = plan_packet.plan
self.plan_ts = plan_packet.logMonoTime
# if user is not responsive to awareness alerts, then start a smooth deceleration
if self.awareness_status < -0.:
self.plan.aTargetMax = min(self.plan.aTargetMax, AWARENESS_DECEL)
self.plan.aTargetMin = min(self.plan.aTargetMin,
self.plan.aTargetMax)
if enable_request or enable_condition or self.enabled:
# add all alerts from car
for alert in self.CS.errors:
self.AM.add(alert, self.enabled)
if not self.plan.longitudinalValid:
self.AM.add("radarCommIssue", self.enabled)
if self.cal_status != Calibration.CALIBRATED:
if self.cal_status == Calibration.UNCALIBRATED:
self.AM.add("calibrationInProgress", self.enabled,
str(self.cal_perc) + '%')
else:
self.AM.add("calibrationInvalid", self.enabled)
if not self.plan.lateralValid:
# If the model is not broadcasting, assume that it is because
# the user has uploaded insufficient data for calibration.
# Other cases that would trigger this are rare and unactionable by the user.
self.AM.add("dataNeeded", self.enabled)
if self.overtemp:
self.AM.add("overheat", self.enabled)
# *** angle offset learning ***
if self.rk.frame % 5 == 2 and self.plan.lateralValid:
# *** run this at 20hz again ***
self.angle_offset = learn_angle_offset(self.enabled, self.CS.vEgo,
self.angle_offset,
self.PL.PP.c_poly,
self.PL.PP.c_prob,
self.LaC.y_des,
self.CS.steeringPressed)
# *** gas/brake PID loop ***
final_gas, final_brake = self.LoC.update(
self.enabled, self.CS.vEgo, self.v_cruise_kph, self.plan.vTarget,
[self.plan.aTargetMin, self.plan.aTargetMax], self.plan.jerkFactor,
self.CP)
# *** steering PID loop ***
final_steer, sat_flag = self.LaC.update(self.enabled, self.CS.vEgo,
self.CS.steeringAngle,
self.CS.steeringPressed,
self.plan.dPoly,
self.angle_offset, self.VM)
self.prof.checkpoint("PID")
# ***** handle alerts ****
# send FCW alert if triggered by planner
if self.plan.fcw:
self.AM.add("fcw", self.enabled)
# send a "steering required alert" if saturation count has reached the limit
if sat_flag:
self.AM.add("steerSaturated", self.enabled)
if self.enabled and self.AM.alertShouldDisable():
print "DISABLING IMMEDIATELY ON ALERT"
self.enabled = False
if self.enabled and self.AM.alertShouldSoftDisable():
if self.soft_disable_timer is None:
self.soft_disable_timer = 3 * self.rate
elif self.soft_disable_timer == 0:
print "SOFT DISABLING ON ALERT"
self.enabled = False
else:
self.soft_disable_timer -= 1
else:
self.soft_disable_timer = None
if enable_condition and not self.enabled and not self.AM.alertPresent(
):
print "*** enabling controls"
# beep for enabling
self.AM.add("enable", self.enabled)
# enable both lateral and longitudinal controls
self.enabled = True
# on activation, let's always set v_cruise from where we are, even if PCM ACC is active
self.v_cruise_kph = int(
round(max(self.CS.vEgo * CV.MS_TO_KPH, V_CRUISE_ENABLE_MIN)))
# 6 minutes driver you're on
self.awareness_status = 1.0
# reset the PID loops
self.LaC.reset()
# start long control at actual speed
self.LoC.reset(v_pid=self.CS.vEgo)
# *** push the alerts to current ***
# TODO: remove output, store them inside AM class instead
self.alert_text_1, self.alert_text_2, self.visual_alert, self.audible_alert = self.AM.process_alerts(
self.cur_time)
# ***** control the car *****
self.CC.enabled = self.enabled
self.CC.gas = float(final_gas)
self.CC.brake = float(final_brake)
self.CC.steeringTorque = float(final_steer)
self.CC.cruiseControl.override = True
# always cancel if we have an interceptor
self.CC.cruiseControl.cancel = bool(
not self.CP.enableCruise
or (not self.enabled and self.CS.cruiseState.enabled))
# brake discount removes a sharp nonlinearity
brake_discount = (1.0 - clip(final_brake * 3., 0.0, 1.0))
self.CC.cruiseControl.speedOverride = float(
max(0.0, ((self.LoC.v_pid - .5) *
brake_discount)) if self.CP.enableCruise else 0.0)
#CC.cruiseControl.accelOverride = float(AC.a_pcm)
# TODO: parametrize 0.714 in interface?
# accelOverride is more or less the max throttle allowed to pcm: usually set to a constant
# unless aTargetMax is very high and then we scale with it; this helpw in quicker restart
self.CC.cruiseControl.accelOverride = float(
max(0.714, self.plan.aTargetMax / A_ACC_MAX))
self.CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
self.CC.hudControl.speedVisible = self.enabled
self.CC.hudControl.lanesVisible = self.enabled
self.CC.hudControl.leadVisible = self.plan.hasLead
self.CC.hudControl.visualAlert = self.visual_alert
self.CC.hudControl.audibleAlert = self.audible_alert
# TODO: remove it from here and put it in state_transition
# this alert will apply next controls cycle
if not self.CI.apply(self.CC):
self.AM.add("controlsFailed", self.enabled)
def data_send(self):
# broadcast carControl first
cc_send = messaging.new_message()
cc_send.init('carControl')
cc_send.carControl = copy(self.CC)
self.carcontrol.send(cc_send.to_bytes())
self.prof.checkpoint("CarControl")
# broadcast carState
cs_send = messaging.new_message()
cs_send.init('carState')
cs_send.carState = copy(self.CS)
self.carstate.send(cs_send.to_bytes())
# ***** publish state to logger *****
# publish controls state at 100Hz
dat = messaging.new_message()
dat.init('live100')
# show rear view camera on phone if in reverse gear or when button is pressed
dat.live100.rearViewCam = (
'reverseGear' in self.CS.errors
and self.rear_view_allowed) or self.rear_view_toggle
dat.live100.alertText1 = self.alert_text_1
dat.live100.alertText2 = self.alert_text_2
dat.live100.awarenessStatus = max(self.awareness_status,
0.0) if self.enabled else 0.0
# what packets were used to process
dat.live100.canMonoTimes = list(self.CS.canMonoTimes)
dat.live100.planMonoTime = self.plan_ts
# if controls is enabled
dat.live100.enabled = self.enabled
# car state
dat.live100.vEgo = self.CS.vEgo
dat.live100.angleSteers = self.CS.steeringAngle
dat.live100.steerOverride = self.CS.steeringPressed
# longitudinal control state
dat.live100.vPid = float(self.LoC.v_pid)
dat.live100.vCruise = float(self.v_cruise_kph)
dat.live100.upAccelCmd = float(self.LoC.Up_accel_cmd)
dat.live100.uiAccelCmd = float(self.LoC.Ui_accel_cmd)
# lateral control state
dat.live100.yDes = float(self.LaC.y_des)
dat.live100.angleSteersDes = float(self.LaC.angle_steers_des)
dat.live100.upSteer = float(self.LaC.Up_steer)
dat.live100.uiSteer = float(self.LaC.Ui_steer)
# processed radar state, should add a_pcm?
dat.live100.vTargetLead = float(self.plan.vTarget)
dat.live100.aTargetMin = float(self.plan.aTargetMin)
dat.live100.aTargetMax = float(self.plan.aTargetMax)
dat.live100.jerkFactor = float(self.plan.jerkFactor)
# log learned angle offset
dat.live100.angleOffset = float(self.angle_offset)
# lag
dat.live100.cumLagMs = -self.rk.remaining * 1000.
self.live100.send(dat.to_bytes())
self.prof.checkpoint("Live100")
def wait(self):
# *** run loop at fixed rate ***
if self.rk.keep_time():
self.prof.display()
def __init__(self, gctx, rate=100):
self.rate = rate
# *** log ***
context = zmq.Context()
# pub
self.live100 = messaging.pub_sock(context,
service_list['live100'].port)
self.carstate = messaging.pub_sock(context,
service_list['carState'].port)
self.carcontrol = messaging.pub_sock(context,
service_list['carControl'].port)
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
# sub
self.thermal = messaging.sub_sock(context,
service_list['thermal'].port)
self.health = messaging.sub_sock(context, service_list['health'].port)
logcan = messaging.sub_sock(context, service_list['can'].port)
self.cal = messaging.sub_sock(context,
service_list['liveCalibration'].port)
self.CC = car.CarControl.new_message()
self.CI, self.CP = get_car(logcan, sendcan)
self.PL = Planner(self.CP)
self.AM = AlertManager()
self.LoC = LongControl()
self.LaC = LatControl()
self.VM = VehicleModel(self.CP)
# write CarParams
params = Params()
params.put("CarParams", self.CP.to_bytes())
# fake plan
self.plan_ts = 0
self.plan = log.Plan.new_message()
self.plan.lateralValid = False
self.plan.longitudinalValid = False
# controls enabled state
self.enabled = False
self.last_enable_request = 0
# learned angle offset
self.angle_offset = 0
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
self.angle_offset = calibration_params["angle_offset"]
except (ValueError, KeyError):
pass
# rear view camera state
self.rear_view_toggle = False
self.rear_view_allowed = (params.get("IsRearViewMirror") == "1")
self.v_cruise_kph = 255
# 0.0 - 1.0
self.awareness_status = 1.0
self.soft_disable_timer = None
self.overtemp = False
self.free_space = 1.0
self.cal_status = Calibration.UNCALIBRATED
self.cal_perc = 0
self.rk = Ratekeeper(self.rate, print_delay_threshold=2. / 1000)
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(4 if TICI else 3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.camera_packets = ["roadCameraState", "driverCameraState"]
if TICI:
self.camera_packets.append("wideRoadCameraState")
params = Params()
self.joystick_mode = params.get_bool("JoystickDebugMode")
joystick_packet = ['testJoystick'] if self.joystick_mode else []
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'
] if SIMULATION else None
self.sm = messaging.SubMaster(
[
'deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan',
'liveLocationKalman', 'managerState', 'liveParameters',
'radarState'
] + self.camera_packets + joystick_packet,
ignore_alive=ignore,
ignore_avg_freq=['radarState', 'longitudinalPlan'])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
if TICI:
self.log_sock = messaging.sub_sock('androidLog')
# wait for one pandaState and one CAN packet
hw_type = messaging.recv_one(
self.sm.sock['pandaState']).pandaState.pandaType
has_relay = hw_type in [
PandaType.blackPanda, PandaType.uno, PandaType.dos
]
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'],
has_relay)
# read params
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
community_feature_toggle = params.get_bool("CommunityFeaturesToggle")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
controller_available = self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature = self.CP.communityFeature or \
self.CP.fingerprintSource == car.CarParams.FingerprintSource.can
community_feature_disallowed = community_feature and (
not community_feature_toggle)
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP)
self.VM = VehicleModel(self.CP)
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
self.v_target = 0.0
self.a_target = 0.0
# scc smoother
self.is_cruise_enabled = False
self.applyMaxSpeed = 0
self.clu_speed_ms = 0.
self.apply_accel = 0.
self.fused_accel = 0.
self.lead_drel = 0.
self.aReqValue = 0.
self.aReqValueMin = 0.
self.aReqValueMax = 0.
self.sccStockCamStatus = 0
self.sccStockCamAct = 0
self.left_lane_visible = False
self.right_lane_visible = False
self.wide_camera = TICI and params.get_bool('EnableWideCamera')
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized,
controller_available,
self.CP.fuzzyFingerprint,
len(self.CP.carFw) > 0)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed and car_recognized and not self.CP.dashcamOnly:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
elif self.joystick_mode:
self.events.add(EventName.joystickDebug, static=True)
self.startup_event = None
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def controlsd_thread(gctx=None):
gc.disable()
# start the loop
set_realtime_priority(3)
params = Params()
# Pub Sockets
sendcan = messaging.pub_sock(service_list['sendcan'].port)
controlsstate = messaging.pub_sock(service_list['controlsState'].port)
carstate = messaging.pub_sock(service_list['carState'].port)
carcontrol = messaging.pub_sock(service_list['carControl'].port)
carevents = messaging.pub_sock(service_list['carEvents'].port)
carparams = messaging.pub_sock(service_list['carParams'].port)
is_metric = params.get("IsMetric") == "1"
passive = params.get("Passive") != "0"
sm = messaging.SubMaster([
'thermal', 'health', 'liveCalibration', 'driverMonitoring', 'plan',
'pathPlan'
])
logcan = messaging.sub_sock(service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan)
AM = AlertManager()
car_recognized = CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not chffrplus
controller_available = CP.enableCamera and CI.CC is not None and not passive
read_only = not car_recognized or not controller_available
if read_only:
CP.safetyModel = car.CarParams.SafetyModel.elm327 # diagnostic only
startup_alert = get_startup_alert(car_recognized, controller_available)
AM.add(sm.frame, startup_alert, False)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
if CP.lateralTuning.which() == 'pid':
LaC = LatControlPID(CP)
else:
LaC = LatControlINDI(CP)
driver_status = DriverStatus()
# Write CarParams for radard and boardd safety mode
params.put("CarParams", CP.to_bytes())
params.put("LongitudinalControl",
"1" if CP.openpilotLongitudinalControl else "0")
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
overtemp = False
free_space = False
cal_status = Calibration.INVALID
cal_perc = 0
mismatch_counter = 0
low_battery = False
events_prev = []
sm['pathPlan'].sensorValid = True
# controlsd is driven by can recv, expected at 100Hz
rk = Ratekeeper(100, print_delay_threshold=None)
prof = Profiler(False) # off by default
while True:
start_time = sec_since_boot()
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter =\
data_sample(CI, CC, sm, cal_status, cal_perc, overtemp, free_space, low_battery,
driver_status, state, mismatch_counter, params)
prof.checkpoint("Sample")
# Create alerts
if not sm.all_alive_and_valid():
events.append(
create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not sm['pathPlan'].mpcSolutionValid:
events.append(
create_event('plannerError',
[ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not sm['pathPlan'].sensorValid:
events.append(
create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT]))
if not sm['pathPlan'].paramsValid:
events.append(create_event('vehicleModelInvalid', [ET.WARNING]))
if not sm['plan'].radarValid:
events.append(
create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if sm['plan'].radarCanError:
events.append(
create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not CS.canValid:
events.append(
create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
# Only allow engagement with brake pressed when stopped behind another stopped car
if CS.brakePressed and sm[
'plan'].vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
events.append(
create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not read_only:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, driver_status, v_acc, a_acc, lac_log = \
state_control(sm.frame, sm.rcv_frame, sm['plan'], sm['pathPlan'], CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk,
driver_status, LaC, LoC, VM, read_only, is_metric, cal_perc)
prof.checkpoint("State Control")
# Publish data
CC, events_prev = data_send(sm, CS, CI, CP, VM, state, events,
actuators, v_cruise_kph, rk, carstate,
carcontrol, carevents, carparams,
controlsstate, sendcan, AM, driver_status,
LaC, LoC, read_only, start_time, v_acc,
a_acc, lac_log, events_prev)
prof.checkpoint("Sent")
rk.monitor_time()
prof.display()
def controlsd_thread(gctx=None):
gc.disable()
# start the loop
set_realtime_priority(3)
params = Params()
tinklaClient = TinklaClient()
# Pub Sockets
sendcan = messaging.pub_sock(service_list['sendcan'].port)
controlsstate = messaging.pub_sock(service_list['controlsState'].port)
carstate = messaging.pub_sock(service_list['carState'].port)
carcontrol = messaging.pub_sock(service_list['carControl'].port)
carevents = messaging.pub_sock(service_list['carEvents'].port)
carparams = messaging.pub_sock(service_list['carParams'].port)
is_metric = params.get("IsMetric") == "1"
passive = params.get("Passive") != "0"
sm = messaging.SubMaster([
'thermal', 'health', 'liveCalibration', 'driverMonitoring', 'plan',
'pathPlan', 'liveParameters'
])
logcan = messaging.sub_sock(service_list['can'].port)
# wait for health and CAN packets
hw_type = messaging.recv_one(sm.sock['health']).health.hwType
is_panda_black = hw_type == log.HealthData.HwType.blackPanda
wait_for_can(logcan)
CI, CP = get_car(logcan, sendcan, is_panda_black)
logcan.close()
# TODO: Use the logcan socket from above, but that will currenly break the tests
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100
can_sock = messaging.sub_sock(service_list['can'].port,
timeout=can_timeout)
car_recognized = CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not chffrplus
controller_available = CP.enableCamera and CI.CC is not None and not passive
read_only = not car_recognized or not controller_available
if read_only:
CP.safetyModel = car.CarParams.SafetyModel.elm327 # diagnostic only
# Write CarParams for radard and boardd safety mode
params.put("CarParams", CP.to_bytes())
params.put("LongitudinalControl",
"1" if CP.openpilotLongitudinalControl else "0")
CC = car.CarControl.new_message()
AM = AlertManager()
startup_alert = get_startup_alert(car_recognized, controller_available)
AM.add(sm.frame, startup_alert, False)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
if CP.lateralTuning.which() == 'pid':
LaC = LatControlPID(CP)
elif CP.lateralTuning.which() == 'indi':
LaC = LatControlINDI(CP)
elif CP.lateralTuning.which() == 'lqr':
LaC = LatControlLQR(CP)
driver_status = DriverStatus()
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
overtemp = False
free_space = False
cal_status = Calibration.INVALID
cal_perc = 0
mismatch_counter = 0
low_battery = False
events_prev = []
sm['pathPlan'].sensorValid = True
sm['pathPlan'].posenetValid = True
# detect sound card presence
sounds_available = not os.path.isfile('/EON') or (
os.path.isdir('/proc/asound/card0')
and open('/proc/asound/card0/state').read().strip() == 'ONLINE')
# controlsd is driven by can recv, expected at 100Hz
rk = Ratekeeper(100, print_delay_threshold=None)
prof = Profiler(False) # off by default
while True:
start_time = sec_since_boot()
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter =\
data_sample(CI, CC, sm, can_sock, cal_status, cal_perc, overtemp, free_space, low_battery,
driver_status, state, mismatch_counter, params)
prof.checkpoint("Sample")
# Create alerts
if not sm.all_alive_and_valid():
events.append(
create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
logAllAliveAndValidInfoToTinklad(sm=sm, tinklaClient=tinklaClient)
if not sm['pathPlan'].mpcSolutionValid:
events.append(
create_event('plannerError',
[ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not sm['pathPlan'].sensorValid:
events.append(
create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT]))
if not sm['pathPlan'].paramsValid:
events.append(create_event('vehicleModelInvalid', [ET.WARNING]))
if not sm['pathPlan'].posenetValid:
events.append(
create_event('posenetInvalid', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not sm['plan'].radarValid:
events.append(
create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if sm['plan'].radarCanError:
events.append(
create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not CS.canValid:
events.append(
create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
tinklaClient.logCANErrorEvent(source="carcontroller",
canMessage=0,
additionalInformation="Invalid CAN")
if not sounds_available:
events.append(
create_event('soundsUnavailable', [ET.NO_ENTRY, ET.PERMANENT]))
# Only allow engagement with brake pressed when stopped behind another stopped car
if CS.brakePressed and sm[
'plan'].vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
events.append(
create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not read_only:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, driver_status, v_acc, a_acc, lac_log = \
state_control(sm.frame, sm.rcv_frame, sm['plan'], sm['pathPlan'], sm['liveParameters'], CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk,
driver_status, LaC, LoC, VM, read_only, is_metric, cal_perc)
rk.keep_time(1. / 10000) # Run at 100Hz
prof.checkpoint("State Control")
# Publish data
CC, events_prev = data_send(sm, CS, CI, CP, VM, state, events,
actuators, v_cruise_kph, rk, carstate,
carcontrol, carevents, carparams,
controlsstate, sendcan, AM, driver_status,
LaC, LoC, read_only, start_time, v_acc,
a_acc, lac_log, events_prev)
prof.checkpoint("Sent")
rk.monitor_time()
prof.display()
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.sm = sm
if self.sm is None:
self.sm = messaging.SubMaster([
'thermal', 'health', 'model', 'liveCalibration',
'dMonitoringState', 'plan', 'pathPlan', 'liveLocationKalman'
])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one health and one CAN packet
hw_type = messaging.recv_one(self.sm.sock['health']).health.hwType
has_relay = hw_type in [HwType.blackPanda, HwType.uno, HwType.dos]
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'],
has_relay)
# read params
params = Params()
self.is_metric = params.get("IsMetric", encoding='utf8') == "1"
self.is_ldw_enabled = params.get("IsLdwEnabled",
encoding='utf8') == "1"
internet_needed = (params.get("Offroad_ConnectivityNeeded",
encoding='utf8') is not None) and (
params.get("DisableUpdates") != b"1")
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
passive = params.get("Passive", encoding='utf8') == "1" or \
internet_needed or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
if self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.sm['liveCalibration'].calStatus = Calibration.CALIBRATED
self.sm['thermal'].freeSpace = 1.
self.sm['dMonitoringState'].events = []
self.sm['dMonitoringState'].awarenessStatus = 1.
self.sm['dMonitoringState'].faceDetected = False
self.startup_event = get_startup_event(car_recognized,
controller_available, hw_type)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if internet_needed:
self.events.add(EventName.internetConnectivityNeeded, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
if hw_type == HwType.whitePanda:
self.events.add(EventName.whitePandaUnsupported, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
class Controls:
def __init__(self, sm=None, pm=None, can_sock=None, CI=None):
config_realtime_process(4, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster(['sendcan', 'controlsState', 'carState',
'carControl', 'carEvents', 'carParams'])
self.camera_packets = ["roadCameraState", "driverCameraState", "wideRoadCameraState"]
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 20
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
self.log_sock = messaging.sub_sock('androidLog')
if CI is None:
# wait for one pandaState and one CAN packet
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'])
else:
self.CI, self.CP = CI, CI.CP
params = Params()
self.joystick_mode = params.get_bool("JoystickDebugMode") or (self.CP.notCar and sm is None)
joystick_packet = ['testJoystick'] if self.joystick_mode else []
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'] if SIMULATION else None
self.sm = messaging.SubMaster(['deviceState', 'pandaStates', 'peripheralState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan', 'liveLocationKalman',
'managerState', 'liveParameters', 'radarState'] + self.camera_packets + joystick_packet,
ignore_alive=ignore, ignore_avg_freq=['radarState', 'longitudinalPlan'])
# set alternative experiences from parameters
self.disengage_on_accelerator = params.get_bool("DisengageOnAccelerator")
self.CP.alternativeExperience = 0
if not self.disengage_on_accelerator:
self.CP.alternativeExperience |= ALTERNATIVE_EXPERIENCE.DISABLE_DISENGAGE_ON_GAS
# read params
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
controller_available = self.CI.CC is not None and not passive and not self.CP.dashcamOnly
self.read_only = not car_recognized or not controller_available or self.CP.dashcamOnly
if self.read_only:
safety_config = car.CarParams.SafetyConfig.new_message()
safety_config.safetyModel = car.CarParams.SafetyModel.noOutput
self.CP.safetyConfigs = [safety_config]
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.CS_prev = car.CarState.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP)
self.VM = VehicleModel(self.CP)
self.LaC: LatControl
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'torque':
self.LaC = LatControlTorque(self.CP, self.CI)
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.cruise_mismatch_counter = 0
self.can_rcv_error_counter = 0
self.last_blinker_frame = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = None
self.button_timers = {ButtonEvent.Type.decelCruise: 0, ButtonEvent.Type.accelCruise: 0}
self.last_actuators = car.CarControl.Actuators.new_message()
self.desired_curvature = 0.0
self.desired_curvature_rate = 0.0
# scc smoother
self.is_cruise_enabled = False
self.applyMaxSpeed = 0
self.apply_accel = 0.
self.fused_accel = 0.
self.lead_drel = 0.
self.aReqValue = 0.
self.aReqValueMin = 0.
self.aReqValueMax = 0.
self.sccStockCamStatus = 0
self.sccStockCamAct = 0
self.left_lane_visible = False
self.right_lane_visible = False
self.disable_op_fcw = params.get_bool('DisableOpFcw')
self.mad_mode_enabled = Params().get_bool('MadModeEnabled')
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized, controller_available, len(self.CP.carFw) > 0)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
if len(self.CP.carFw) > 0:
set_offroad_alert("Offroad_CarUnrecognized", True)
else:
set_offroad_alert("Offroad_NoFirmware", True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
elif self.joystick_mode:
self.events.add(EventName.joystickDebug, static=True)
self.startup_event = None
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def update_events(self, CS):
"""Compute carEvents from carState"""
self.events.clear()
# Add startup event
if self.startup_event is not None:
self.events.add(self.startup_event)
self.startup_event = None
# Don't add any more events if not initialized
if not self.initialized:
self.events.add(EventName.controlsInitializing)
return
# Disable on rising edge of accelerator or brake. Also disable on brake when speed > 0
if not self.mad_mode_enabled:
if (CS.gasPressed and not self.CS_prev.gasPressed and self.disengage_on_accelerator) or \
(CS.brakePressed and (not self.CS_prev.brakePressed or not CS.standstill)):
self.events.add(EventName.pedalPressed)
if CS.gasPressed:
self.events.add(EventName.pedalPressedPreEnable if self.disengage_on_accelerator else
EventName.gasPressedOverride)
if not self.CP.notCar:
self.events.add_from_msg(self.sm['driverMonitoringState'].events)
# Handle car events. Ignore when CAN is invalid
if CS.canTimeout:
self.events.add(EventName.canBusMissing)
elif not CS.canValid:
self.events.add(EventName.canError)
else:
self.events.add_from_msg(CS.events)
# Create events for temperature, disk space, and memory
if self.sm['deviceState'].thermalStatus >= ThermalStatus.red:
self.events.add(EventName.overheat)
if self.sm['deviceState'].freeSpacePercent < 7 and not SIMULATION:
# under 7% of space free no enable allowed
self.events.add(EventName.outOfSpace)
# TODO: make tici threshold the same
if self.sm['deviceState'].memoryUsagePercent > 90 and not SIMULATION:
self.events.add(EventName.lowMemory)
# TODO: enable this once loggerd CPU usage is more reasonable
#cpus = list(self.sm['deviceState'].cpuUsagePercent)
#if max(cpus, default=0) > 95 and not SIMULATION:
# self.events.add(EventName.highCpuUsage)
# Alert if fan isn't spinning for 5 seconds
if self.sm['peripheralState'].pandaType == PandaType.dos:
if self.sm['peripheralState'].fanSpeedRpm == 0 and self.sm['deviceState'].fanSpeedPercentDesired > 50:
if (self.sm.frame - self.last_functional_fan_frame) * DT_CTRL > 5.0:
self.events.add(EventName.fanMalfunction)
else:
self.last_functional_fan_frame = self.sm.frame
# Handle calibration status
cal_status = self.sm['liveCalibration'].calStatus
if cal_status != Calibration.CALIBRATED:
if cal_status == Calibration.UNCALIBRATED:
self.events.add(EventName.calibrationIncomplete)
else:
self.events.add(EventName.calibrationInvalid)
# Handle lane change
if self.sm['lateralPlan'].laneChangeState == LaneChangeState.preLaneChange:
direction = self.sm['lateralPlan'].laneChangeDirection
if (CS.leftBlindspot and direction == LaneChangeDirection.left) or \
(CS.rightBlindspot and direction == LaneChangeDirection.right):
self.events.add(EventName.laneChangeBlocked)
elif self.sm['lateralPlan'].autoLaneChangeEnabled and self.sm['lateralPlan'].autoLaneChangeTimer > 0:
self.events.add(EventName.autoLaneChange)
else:
if direction == LaneChangeDirection.left:
self.events.add(EventName.preLaneChangeLeft)
else:
self.events.add(EventName.preLaneChangeRight)
elif self.sm['lateralPlan'].laneChangeState in (LaneChangeState.laneChangeStarting,
LaneChangeState.laneChangeFinishing):
self.events.add(EventName.laneChange)
for i, pandaState in enumerate(self.sm['pandaStates']):
# All pandas must match the list of safetyConfigs, and if outside this list, must be silent or noOutput
if i < len(self.CP.safetyConfigs):
safety_mismatch = pandaState.safetyModel != self.CP.safetyConfigs[i].safetyModel or \
pandaState.safetyParam != self.CP.safetyConfigs[i].safetyParam or \
pandaState.alternativeExperience != self.CP.alternativeExperience
else:
safety_mismatch = pandaState.safetyModel not in IGNORED_SAFETY_MODES
if safety_mismatch or self.mismatch_counter >= 200:
self.events.add(EventName.controlsMismatch)
if log.PandaState.FaultType.relayMalfunction in pandaState.faults:
self.events.add(EventName.relayMalfunction)
# Handle HW and system malfunctions
# Order is very intentional here. Be careful when modifying this.
num_events = len(self.events)
not_running = {p.name for p in self.sm['managerState'].processes if not p.running and p.shouldBeRunning}
if self.sm.rcv_frame['managerState'] and (not_running - IGNORE_PROCESSES):
self.events.add(EventName.processNotRunning)
else:
if not SIMULATION and not self.rk.lagging:
if not self.sm.all_alive(self.camera_packets):
self.events.add(EventName.cameraMalfunction)
elif not self.sm.all_freq_ok(self.camera_packets):
self.events.add(EventName.cameraFrameRate)
if self.rk.lagging:
self.events.add(EventName.controlsdLagging)
if len(self.sm['radarState'].radarErrors):
self.events.add(EventName.radarFault)
if not self.sm.valid['pandaStates']:
self.events.add(EventName.usbError)
# generic catch-all. ideally, a more specific event should be added above instead
no_system_errors = len(self.events) != num_events
if (not self.sm.all_checks() or self.can_rcv_error) and no_system_errors and CS.canValid and not CS.canTimeout:
if not self.sm.all_alive():
self.events.add(EventName.commIssue)
elif not self.sm.all_freq_ok():
self.events.add(EventName.commIssueAvgFreq)
else: # invalid or can_rcv_error.
self.events.add(EventName.commIssue)
logs = {
'invalid': [s for s, valid in self.sm.valid.items() if not valid],
'not_alive': [s for s, alive in self.sm.alive.items() if not alive],
'not_freq_ok': [s for s, freq_ok in self.sm.freq_ok.items() if not freq_ok],
'can_error': self.can_rcv_error,
}
if logs != self.logged_comm_issue:
cloudlog.event("commIssue", error=True, **logs)
self.logged_comm_issue = logs
else:
self.logged_comm_issue = None
if not self.sm['liveParameters'].valid:
self.events.add(EventName.vehicleModelInvalid)
if not self.sm['lateralPlan'].mpcSolutionValid:
self.events.add(EventName.plannerError)
if not self.sm['liveLocationKalman'].sensorsOK and not NOSENSOR:
if self.sm.frame > 5 / DT_CTRL: # Give locationd some time to receive all the inputs
self.events.add(EventName.sensorDataInvalid)
if not self.sm['liveLocationKalman'].posenetOK:
self.events.add(EventName.posenetInvalid)
if not self.sm['liveLocationKalman'].deviceStable:
self.events.add(EventName.deviceFalling)
if not REPLAY:
# Check for mismatch between openpilot and car's PCM
cruise_mismatch = CS.cruiseState.enabledAcc and (not self.enabled or not self.CP.pcmCruise)
self.cruise_mismatch_counter = self.cruise_mismatch_counter + 1 if cruise_mismatch else 0
if self.cruise_mismatch_counter > int(6. / DT_CTRL):
self.events.add(EventName.cruiseMismatch)
# Check for FCW
stock_long_is_braking = self.enabled and not self.CP.openpilotLongitudinalControl and CS.aEgo < -1.25
model_fcw = self.sm['modelV2'].meta.hardBrakePredicted and not CS.brakePressed and not stock_long_is_braking
planner_fcw = self.sm['longitudinalPlan'].fcw and self.enabled
if not self.disable_op_fcw and (planner_fcw or model_fcw):
self.events.add(EventName.fcw)
for m in messaging.drain_sock(self.log_sock, wait_for_one=False):
try:
msg = m.androidLog.message
if any(err in msg for err in ("ERROR_CRC", "ERROR_ECC", "ERROR_STREAM_UNDERFLOW", "APPLY FAILED")):
csid = msg.split("CSID:")[-1].split(" ")[0]
evt = CSID_MAP.get(csid, None)
if evt is not None:
self.events.add(evt)
except UnicodeDecodeError:
pass
# TODO: fix simulator
if not SIMULATION:
#if not NOSENSOR:
# if not self.sm['liveLocationKalman'].gpsOK and (self.distance_traveled > 1000):
# # Not show in first 1 km to allow for driving out of garage. This event shows after 5 minutes
# self.events.add(EventName.noGps)
if self.sm['modelV2'].frameDropPerc > 20:
self.events.add(EventName.modeldLagging)
if self.sm['liveLocationKalman'].excessiveResets:
self.events.add(EventName.localizerMalfunction)
# Only allow engagement with brake pressed when stopped behind another stopped car
speeds = self.sm['longitudinalPlan'].speeds
if len(speeds) > 1:
v_future = speeds[-1]
else:
v_future = 100.0
#if CS.brakePressed and v_future >= self.CP.vEgoStarting \
# and self.CP.openpilotLongitudinalControl and CS.vEgo < 0.3:
# self.events.add(EventName.noTarget)
def data_sample(self):
"""Receive data from sockets and update carState"""
# Update carState from CAN
can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True)
CS = self.CI.update(self.CC, can_strs)
self.sm.update(0)
if not self.initialized:
all_valid = CS.canValid and self.sm.all_checks()
if all_valid or self.sm.frame * DT_CTRL > 3.5 or SIMULATION:
if not self.read_only:
self.CI.init(self.CP, self.can_sock, self.pm.sock['sendcan'])
self.initialized = True
if REPLAY and self.sm['pandaStates'][0].controlsAllowed:
self.state = State.enabled
Params().put_bool("ControlsReady", True)
# Check for CAN timeout
if not can_strs:
self.can_rcv_error_counter += 1
self.can_rcv_error = True
else:
self.can_rcv_error = False
# When the panda and controlsd do not agree on controls_allowed
# we want to disengage openpilot. However the status from the panda goes through
# another socket other than the CAN messages and one can arrive earlier than the other.
# Therefore we allow a mismatch for two samples, then we trigger the disengagement.
if not self.enabled:
self.mismatch_counter = 0
# All pandas not in silent mode must have controlsAllowed when openpilot is enabled
if self.enabled and any(not ps.controlsAllowed for ps in self.sm['pandaStates']
if ps.safetyModel not in IGNORED_SAFETY_MODES):
self.mismatch_counter += 1
self.distance_traveled += CS.vEgo * DT_CTRL
return CS
def state_transition(self, CS):
"""Compute conditional state transitions and execute actions on state transitions"""
self.v_cruise_kph_last = self.v_cruise_kph
self.CP.pcmCruise = self.CI.CP.pcmCruise
# if stock cruise is completely disabled, then we can use our own set speed logic
#if not self.CP.pcmCruise:
# self.v_cruise_kph = update_v_cruise(self.v_cruise_kph, CS.buttonEvents, self.button_timers, self.enabled, self.is_metric)
#else:
# if CS.cruiseState.available:
# self.v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
# else:
# self.v_cruise_kph = 0
SccSmoother.update_cruise_buttons(self, CS, self.CP.openpilotLongitudinalControl)
# decrement the soft disable timer at every step, as it's reset on
# entrance in SOFT_DISABLING state
self.soft_disable_timer = max(0, self.soft_disable_timer - 1)
self.current_alert_types = [ET.PERMANENT]
# ENABLED, SOFT DISABLING, PRE ENABLING, OVERRIDING
if self.state != State.disabled:
# user and immediate disable always have priority in a non-disabled state
if self.events.any(ET.USER_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.USER_DISABLE)
elif self.events.any(ET.IMMEDIATE_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.IMMEDIATE_DISABLE)
else:
# ENABLED
if self.state == State.enabled:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = int(0.5 / DT_CTRL)
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.events.any(ET.OVERRIDE):
self.state = State.overriding
self.current_alert_types.append(ET.OVERRIDE)
# SOFT DISABLING
elif self.state == State.softDisabling:
if not self.events.any(ET.SOFT_DISABLE):
# no more soft disabling condition, so go back to ENABLED
self.state = State.enabled
elif self.soft_disable_timer > 0:
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.soft_disable_timer <= 0:
self.state = State.disabled
# PRE ENABLING
elif self.state == State.preEnabled:
if self.events.any(ET.NO_ENTRY):
self.state = State.disabled
self.current_alert_types.append(ET.NO_ENTRY)
elif not self.events.any(ET.PRE_ENABLE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.PRE_ENABLE)
# OVERRIDING
elif self.state == State.overriding:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = int(SOFT_DISABLE_TIME / DT_CTRL)
self.current_alert_types.append(ET.SOFT_DISABLE)
elif not self.events.any(ET.OVERRIDE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.OVERRIDE)
# DISABLED
elif self.state == State.disabled:
if self.events.any(ET.ENABLE):
if self.events.any(ET.NO_ENTRY):
self.current_alert_types.append(ET.NO_ENTRY)
else:
if self.events.any(ET.PRE_ENABLE):
self.state = State.preEnabled
elif self.events.any(ET.OVERRIDE):
self.state = State.overriding
else:
self.state = State.enabled
self.current_alert_types.append(ET.ENABLE)
if not self.CP.pcmCruise:
self.v_cruise_kph = initialize_v_cruise(CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last)
# Check if openpilot is engaged and actuators are enabled
self.enabled = self.state in ENABLED_STATES
self.active = self.state in ACTIVE_STATES
if self.active:
self.current_alert_types.append(ET.WARNING)
def state_control(self, CS):
"""Given the state, this function returns a CarControl packet"""
# Update VehicleModel
params = self.sm['liveParameters']
x = max(params.stiffnessFactor, 0.1)
#sr = max(params.steerRatio, 0.1)
if ntune_common_enabled('useLiveSteerRatio'):
sr = max(params.steerRatio, 0.1)
else:
sr = max(ntune_common_get('steerRatio'), 0.1)
self.VM.update_params(x, sr)
lat_plan = self.sm['lateralPlan']
long_plan = self.sm['longitudinalPlan']
CC = car.CarControl.new_message()
CC.enabled = self.enabled
# Check which actuators can be enabled
CC.latActive = self.active and not CS.steerFaultTemporary and not CS.steerFaultPermanent and \
CS.vEgo > self.CP.minSteerSpeed and not CS.standstill \
and abs(CS.steeringAngleDeg) < self.CP.maxSteeringAngleDeg
CC.longActive = self.active and not self.events.any(ET.OVERRIDE) and self.CP.openpilotLongitudinalControl
actuators = CC.actuators
actuators.longControlState = self.LoC.long_control_state
if CS.leftBlinker or CS.rightBlinker:
self.last_blinker_frame = self.sm.frame
# State specific actions
if not CC.latActive:
self.LaC.reset()
if not CC.longActive:
self.LoC.reset(v_pid=CS.vEgo)
if not CS.cruiseState.enabledAcc:
self.LoC.reset(v_pid=CS.vEgo)
if not self.joystick_mode:
# accel PID loop
pid_accel_limits = self.CI.get_pid_accel_limits(self.CP, CS.vEgo, self.v_cruise_kph * CV.KPH_TO_MS)
t_since_plan = (self.sm.frame - self.sm.rcv_frame['longitudinalPlan']) * DT_CTRL
actuators.accel = self.LoC.update(CC.longActive and CS.cruiseState.enabledAcc, CS, long_plan, pid_accel_limits, t_since_plan,
self.sm['radarState'])
# Steering PID loop and lateral MPC
self.desired_curvature, self.desired_curvature_rate = get_lag_adjusted_curvature(self.CP, CS.vEgo,
lat_plan.psis,
lat_plan.curvatures,
lat_plan.curvatureRates)
actuators.steer, actuators.steeringAngleDeg, lac_log = self.LaC.update(CC.latActive, CS, self.VM, params,
self.last_actuators, self.desired_curvature,
self.desired_curvature_rate, self.sm['liveLocationKalman'])
else:
lac_log = log.ControlsState.LateralDebugState.new_message()
if self.sm.rcv_frame['testJoystick'] > 0:
if CC.longActive:
actuators.accel = 4.0*clip(self.sm['testJoystick'].axes[0], -1, 1)
if CC.latActive:
steer = clip(self.sm['testJoystick'].axes[1], -1, 1)
# max angle is 45 for angle-based cars
actuators.steer, actuators.steeringAngleDeg = steer, steer * 45.
lac_log.active = self.active
lac_log.steeringAngleDeg = CS.steeringAngleDeg
lac_log.output = actuators.steer
lac_log.saturated = abs(actuators.steer) >= 0.9
# Send a "steering required alert" if saturation count has reached the limit
if lac_log.active and lac_log.saturated and not CS.steeringPressed:
dpath_points = lat_plan.dPathPoints
if len(dpath_points):
# Check if we deviated from the path
# TODO use desired vs actual curvature
left_deviation = actuators.steer > 0 and dpath_points[0] < -0.20
right_deviation = actuators.steer < 0 and dpath_points[0] > 0.20
if left_deviation or right_deviation:
self.events.add(EventName.steerSaturated)
# Ensure no NaNs/Infs
for p in ACTUATOR_FIELDS:
attr = getattr(actuators, p)
if not isinstance(attr, SupportsFloat):
continue
if not math.isfinite(attr):
cloudlog.error(f"actuators.{p} not finite {actuators.to_dict()}")
setattr(actuators, p, 0.0)
return CC, lac_log
def update_button_timers(self, buttonEvents):
# increment timer for buttons still pressed
for k in self.button_timers:
if self.button_timers[k] > 0:
self.button_timers[k] += 1
for b in buttonEvents:
if b.type.raw in self.button_timers:
self.button_timers[b.type.raw] = 1 if b.pressed else 0
def publish_logs(self, CS, start_time, CC, lac_log):
"""Send actuators and hud commands to the car, send controlsstate and MPC logging"""
# Orientation and angle rates can be useful for carcontroller
# Only calibrated (car) frame is relevant for the carcontroller
orientation_value = list(self.sm['liveLocationKalman'].calibratedOrientationNED.value)
if len(orientation_value) > 2:
CC.orientationNED = orientation_value
angular_rate_value = list(self.sm['liveLocationKalman'].angularVelocityCalibrated.value)
if len(angular_rate_value) > 2:
CC.angularVelocity = angular_rate_value
CC.cruiseControl.cancel = self.CP.pcmCruise and not self.enabled and CS.cruiseState.enabled
if self.joystick_mode and self.sm.rcv_frame['testJoystick'] > 0 and self.sm['testJoystick'].buttons[0]:
CC.cruiseControl.cancel = True
hudControl = CC.hudControl
hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
hudControl.speedVisible = self.enabled
hudControl.lanesVisible = self.enabled
hudControl.leadVisible = self.sm['longitudinalPlan'].hasLead
right_lane_visible = self.sm['lateralPlan'].rProb > 0.5
left_lane_visible = self.sm['lateralPlan'].lProb > 0.5
if self.sm.frame % 100 == 0:
self.right_lane_visible = right_lane_visible
self.left_lane_visible = left_lane_visible
hudControl.rightLaneVisible = self.right_lane_visible
hudControl.leftLaneVisible = self.left_lane_visible
recent_blinker = (self.sm.frame - self.last_blinker_frame) * DT_CTRL < 5.0 # 5s blinker cooldown
ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \
and not CC.latActive and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED
model_v2 = self.sm['modelV2']
desire_prediction = model_v2.meta.desirePrediction
if len(desire_prediction) and ldw_allowed:
right_lane_visible = self.sm['lateralPlan'].rProb > 0.5
left_lane_visible = self.sm['lateralPlan'].lProb > 0.5
l_lane_change_prob = desire_prediction[Desire.laneChangeLeft - 1]
r_lane_change_prob = desire_prediction[Desire.laneChangeRight - 1]
lane_lines = model_v2.laneLines
l_lane_close = left_lane_visible and (lane_lines[1].y[0] > -(1.08 + CAMERA_OFFSET))
r_lane_close = right_lane_visible and (lane_lines[2].y[0] < (1.08 - CAMERA_OFFSET))
hudControl.leftLaneDepart = bool(l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close)
hudControl.rightLaneDepart = bool(r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close)
if hudControl.rightLaneDepart or hudControl.leftLaneDepart:
self.events.add(EventName.ldw)
clear_event_types = set()
if ET.WARNING not in self.current_alert_types:
clear_event_types.add(ET.WARNING)
if self.enabled:
clear_event_types.add(ET.NO_ENTRY)
alerts = self.events.create_alerts(self.current_alert_types, [self.CP, CS, self.sm, self.is_metric, self.soft_disable_timer])
self.AM.add_many(self.sm.frame, alerts)
current_alert = self.AM.process_alerts(self.sm.frame, clear_event_types)
if current_alert:
hudControl.visualAlert = current_alert.visual_alert
if not self.read_only and self.initialized:
# send car controls over can
self.last_actuators, can_sends = self.CI.apply(CC, self)
self.pm.send('sendcan', can_list_to_can_capnp(can_sends, msgtype='sendcan', valid=CS.canValid))
CC.actuatorsOutput = self.last_actuators
force_decel = (self.sm['driverMonitoringState'].awarenessStatus < 0.) or \
(self.state == State.softDisabling)
# Curvature & Steering angle
params = self.sm['liveParameters']
steer_angle_without_offset = math.radians(CS.steeringAngleDeg - params.angleOffsetDeg)
curvature = -self.VM.calc_curvature(steer_angle_without_offset, CS.vEgo, params.roll)
# controlsState
dat = messaging.new_message('controlsState')
dat.valid = CS.canValid
controlsState = dat.controlsState
if current_alert:
controlsState.alertText1 = current_alert.alert_text_1
controlsState.alertText2 = current_alert.alert_text_2
controlsState.alertSize = current_alert.alert_size
controlsState.alertStatus = current_alert.alert_status
controlsState.alertBlinkingRate = current_alert.alert_rate
controlsState.alertType = current_alert.alert_type
controlsState.alertSound = current_alert.audible_alert
controlsState.canMonoTimes = list(CS.canMonoTimes)
controlsState.longitudinalPlanMonoTime = self.sm.logMonoTime['longitudinalPlan']
controlsState.lateralPlanMonoTime = self.sm.logMonoTime['lateralPlan']
controlsState.enabled = self.enabled
controlsState.active = self.active
controlsState.curvature = curvature
controlsState.desiredCurvature = self.desired_curvature
controlsState.desiredCurvatureRate = self.desired_curvature_rate
controlsState.state = self.state
controlsState.engageable = not self.events.any(ET.NO_ENTRY)
controlsState.longControlState = self.LoC.long_control_state
controlsState.vPid = float(self.LoC.v_pid)
controlsState.vCruise = float(self.applyMaxSpeed if self.CP.openpilotLongitudinalControl else self.v_cruise_kph)
controlsState.upAccelCmd = float(self.LoC.pid.p)
controlsState.uiAccelCmd = float(self.LoC.pid.i)
controlsState.ufAccelCmd = float(self.LoC.pid.f)
controlsState.cumLagMs = -self.rk.remaining * 1000.
controlsState.startMonoTime = int(start_time * 1e9)
controlsState.forceDecel = bool(force_decel)
controlsState.canErrorCounter = self.can_rcv_error_counter
controlsState.angleSteers = steer_angle_without_offset * CV.RAD_TO_DEG
controlsState.applyAccel = self.apply_accel
controlsState.aReqValue = self.aReqValue
controlsState.aReqValueMin = self.aReqValueMin
controlsState.aReqValueMax = self.aReqValueMax
controlsState.sccStockCamAct = self.sccStockCamAct
controlsState.sccStockCamStatus = self.sccStockCamStatus
controlsState.steerRatio = self.VM.sR
controlsState.steerRateCost = ntune_common_get('steerRateCost')
controlsState.steerActuatorDelay = ntune_common_get('steerActuatorDelay')
controlsState.sccGasFactor = ntune_scc_get('sccGasFactor')
controlsState.sccBrakeFactor = ntune_scc_get('sccBrakeFactor')
controlsState.sccCurvatureFactor = ntune_scc_get('sccCurvatureFactor')
lat_tuning = self.CP.lateralTuning.which()
if self.joystick_mode:
controlsState.lateralControlState.debugState = lac_log
elif self.CP.steerControlType == car.CarParams.SteerControlType.angle:
controlsState.lateralControlState.angleState = lac_log
elif lat_tuning == 'pid':
controlsState.lateralControlState.pidState = lac_log
elif lat_tuning == 'torque':
controlsState.lateralControlState.torqueState = lac_log
elif lat_tuning == 'lqr':
controlsState.lateralControlState.lqrState = lac_log
elif lat_tuning == 'indi':
controlsState.lateralControlState.indiState = lac_log
self.pm.send('controlsState', dat)
# carState
car_events = self.events.to_msg()
cs_send = messaging.new_message('carState')
cs_send.valid = CS.canValid
cs_send.carState = CS
cs_send.carState.events = car_events
self.pm.send('carState', cs_send)
# carEvents - logged every second or on change
if (self.sm.frame % int(1. / DT_CTRL) == 0) or (self.events.names != self.events_prev):
ce_send = messaging.new_message('carEvents', len(self.events))
ce_send.carEvents = car_events
self.pm.send('carEvents', ce_send)
self.events_prev = self.events.names.copy()
# carParams - logged every 50 seconds (> 1 per segment)
if (self.sm.frame % int(50. / DT_CTRL) == 0):
cp_send = messaging.new_message('carParams')
cp_send.carParams = self.CP
self.pm.send('carParams', cp_send)
# carControl
cc_send = messaging.new_message('carControl')
cc_send.valid = CS.canValid
cc_send.carControl = CC
self.pm.send('carControl', cc_send)
# copy CarControl to pass to CarInterface on the next iteration
self.CC = CC
def step(self):
start_time = sec_since_boot()
self.prof.checkpoint("Ratekeeper", ignore=True)
# Sample data from sockets and get a carState
CS = self.data_sample()
cloudlog.timestamp("Data sampled")
self.prof.checkpoint("Sample")
self.update_events(CS)
cloudlog.timestamp("Events updated")
if not self.read_only and self.initialized:
# Update control state
self.state_transition(CS)
self.prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
CC, lac_log = self.state_control(CS)
self.prof.checkpoint("State Control")
# Publish data
self.publish_logs(CS, start_time, CC, lac_log)
self.prof.checkpoint("Sent")
self.update_button_timers(CS.buttonEvents)
self.CS_prev = CS
def controlsd_thread(self):
while True:
self.step()
self.rk.monitor_time()
self.prof.display()
def __init__(self, sm=None, pm=None, can_sock=None, CI=None):
config_realtime_process(4, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster(['sendcan', 'controlsState', 'carState',
'carControl', 'carEvents', 'carParams'])
self.camera_packets = ["roadCameraState", "driverCameraState", "wideRoadCameraState"]
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 20
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
self.log_sock = messaging.sub_sock('androidLog')
if CI is None:
# wait for one pandaState and one CAN packet
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'])
else:
self.CI, self.CP = CI, CI.CP
params = Params()
self.joystick_mode = params.get_bool("JoystickDebugMode") or (self.CP.notCar and sm is None)
joystick_packet = ['testJoystick'] if self.joystick_mode else []
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'] if SIMULATION else None
self.sm = messaging.SubMaster(['deviceState', 'pandaStates', 'peripheralState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan', 'liveLocationKalman',
'managerState', 'liveParameters', 'radarState'] + self.camera_packets + joystick_packet,
ignore_alive=ignore, ignore_avg_freq=['radarState', 'longitudinalPlan'])
# set alternative experiences from parameters
self.disengage_on_accelerator = params.get_bool("DisengageOnAccelerator")
self.CP.alternativeExperience = 0
if not self.disengage_on_accelerator:
self.CP.alternativeExperience |= ALTERNATIVE_EXPERIENCE.DISABLE_DISENGAGE_ON_GAS
# read params
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
controller_available = self.CI.CC is not None and not passive and not self.CP.dashcamOnly
self.read_only = not car_recognized or not controller_available or self.CP.dashcamOnly
if self.read_only:
safety_config = car.CarParams.SafetyConfig.new_message()
safety_config.safetyModel = car.CarParams.SafetyModel.noOutput
self.CP.safetyConfigs = [safety_config]
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.CS_prev = car.CarState.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP)
self.VM = VehicleModel(self.CP)
self.LaC: LatControl
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'torque':
self.LaC = LatControlTorque(self.CP, self.CI)
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.cruise_mismatch_counter = 0
self.can_rcv_error_counter = 0
self.last_blinker_frame = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = None
self.button_timers = {ButtonEvent.Type.decelCruise: 0, ButtonEvent.Type.accelCruise: 0}
self.last_actuators = car.CarControl.Actuators.new_message()
self.desired_curvature = 0.0
self.desired_curvature_rate = 0.0
# scc smoother
self.is_cruise_enabled = False
self.applyMaxSpeed = 0
self.apply_accel = 0.
self.fused_accel = 0.
self.lead_drel = 0.
self.aReqValue = 0.
self.aReqValueMin = 0.
self.aReqValueMax = 0.
self.sccStockCamStatus = 0
self.sccStockCamAct = 0
self.left_lane_visible = False
self.right_lane_visible = False
self.disable_op_fcw = params.get_bool('DisableOpFcw')
self.mad_mode_enabled = Params().get_bool('MadModeEnabled')
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized, controller_available, len(self.CP.carFw) > 0)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
if len(self.CP.carFw) > 0:
set_offroad_alert("Offroad_CarUnrecognized", True)
else:
set_offroad_alert("Offroad_NoFirmware", True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
elif self.joystick_mode:
self.events.add(EventName.joystickDebug, static=True)
self.startup_event = None
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
class Controls:
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(4 if TICI else 3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster(['sendcan', 'controlsState', 'carState',
'carControl', 'carEvents', 'carParams'])
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'] if SIMULATION else None
self.sm = messaging.SubMaster(['deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan', 'liveLocationKalman',
'roadCameraState', 'driverCameraState', 'managerState', 'liveParameters', 'radarState'],
ignore_alive=ignore, ignore_avg_freq=['radarState', 'longitudinalPlan'])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one pandaState and one CAN packet
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'])
# read params
params = Params()
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
self.enable_lte_onroad = params.get_bool("EnableLteOnroad")
community_feature_toggle = params.get_bool("CommunityFeaturesToggle")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
self.commIssue_ignored = params.get_bool("ComIssueGone")
self.auto_enabled = params.get_bool("AutoEnable") and params.get_bool("MadModeEnabled")
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
fuzzy_fingerprint = self.CP.fuzzyFingerprint
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature = self.CP.communityFeature or fuzzy_fingerprint
community_feature_disallowed = community_feature and (not community_feature_toggle)
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
self.lateral_control_method = 0
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP)
self.lateral_control_method = 3
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
self.lateral_control_method = 0
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
self.lateral_control_method = 1
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.lateral_control_method = 2
self.long_plan_source = 0
self.controlsAllowed = False
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized, controller_available, fuzzy_fingerprint)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
#elif self.read_only:
# self.events.add(EventName.dashcamMode, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
self.hyundai_lkas = self.read_only #read_only
self.mpc_frame = 0
self.steerRatio_Max = float(int(params.get("SteerRatioMaxAdj", encoding="utf8")) * 0.1)
self.angle_differ_range = [0, 15]
self.steerRatio_range = [self.CP.steerRatio, self.steerRatio_Max]
self.new_steerRatio = self.CP.steerRatio
self.new_steerRatio_prev = self.CP.steerRatio
self.steerRatio_to_send = 0
self.model_long_alert_prev = True
self.delayed_comm_issue_timer = 0
def auto_enable(self, CS):
if self.state != State.enabled and CS.vEgo >= 3 * CV.KPH_TO_MS and CS.gearShifter == 2 and self.sm['liveCalibration'].calStatus != Calibration.UNCALIBRATED:
if self.sm.all_alive_and_valid() and self.enabled != self.controlsAllowed:
self.events.add( EventName.pcmEnable )
def update_events(self, CS):
"""Compute carEvents from carState"""
self.events.clear()
self.events.add_from_msg(CS.events)
self.events.add_from_msg(self.sm['driverMonitoringState'].events)
# Handle startup event
if self.startup_event is not None:
self.events.add(self.startup_event)
self.startup_event = None
# Don't add any more events if not initialized
if not self.initialized:
self.events.add(EventName.controlsInitializing)
return
# Create events for battery, temperature, disk space, and memory
if self.sm['deviceState'].batteryPercent < 1 and self.sm['deviceState'].chargingError:
# at zero percent battery, while discharging, OP should not allowed
self.events.add(EventName.lowBattery)
if self.sm['deviceState'].thermalStatus >= ThermalStatus.red:
self.events.add(EventName.overheat)
if self.sm['deviceState'].freeSpacePercent < 7:
# under 7% of space free no enable allowed
self.events.add(EventName.outOfSpace)
if self.sm['deviceState'].memoryUsagePercent > 90:
self.events.add(EventName.lowMemory)
# Alert if fan isn't spinning for 5 seconds
if self.sm['pandaState'].pandaType in [PandaType.uno, PandaType.dos]:
if self.sm['pandaState'].fanSpeedRpm == 0 and self.sm['deviceState'].fanSpeedPercentDesired > 50:
if (self.sm.frame - self.last_functional_fan_frame) * DT_CTRL > 5.0:
self.events.add(EventName.fanMalfunction)
else:
self.last_functional_fan_frame = self.sm.frame
# Handle calibration status
cal_status = self.sm['liveCalibration'].calStatus
if cal_status != Calibration.CALIBRATED:
if cal_status == Calibration.UNCALIBRATED:
self.events.add(EventName.calibrationIncomplete)
else:
self.events.add(EventName.calibrationInvalid)
# Handle lane change
if self.sm['lateralPlan'].laneChangeState == LaneChangeState.preLaneChange:
direction = self.sm['lateralPlan'].laneChangeDirection
if (CS.leftBlindspot and direction == LaneChangeDirection.left) or \
(CS.rightBlindspot and direction == LaneChangeDirection.right):
self.events.add(EventName.laneChangeBlocked)
else:
if direction == LaneChangeDirection.left:
self.events.add(EventName.preLaneChangeLeft)
else:
self.events.add(EventName.preLaneChangeRight)
elif self.sm['lateralPlan'].laneChangeState in [LaneChangeState.laneChangeStarting,
LaneChangeState.laneChangeFinishing]:
self.events.add(EventName.laneChange)
if self.can_rcv_error or not CS.canValid:
self.events.add(EventName.canError)
safety_mismatch = self.sm['pandaState'].safetyModel != self.CP.safetyModel or self.sm['pandaState'].safetyParam != self.CP.safetyParam
if safety_mismatch or self.mismatch_counter >= 200:
self.events.add(EventName.controlsMismatch)
if not self.sm['liveParameters'].valid:
self.events.add(EventName.vehicleModelInvalid)
if len(self.sm['radarState'].radarErrors):
self.events.add(EventName.radarFault)
elif not self.sm.all_alive_and_valid() and self.sm['pandaState'].pandaType != PandaType.whitePanda and not self.commIssue_ignored:
self.delayed_comm_issue_timer += 1
if self.delayed_comm_issue_timer > 150 and not Params().get_bool("OpkrMapEnable"):
self.events.add(EventName.commIssue)
elif self.delayed_comm_issue_timer > 300 and Params().get_bool("OpkrMapEnable"):
self.events.add(EventName.commIssue)
if not self.logged_comm_issue:
cloudlog.error(f"commIssue - valid: {self.sm.valid} - alive: {self.sm.alive}")
self.logged_comm_issue = True
else:
self.logged_comm_issue = False
self.delayed_comm_issue_timer = 0
if not self.sm['lateralPlan'].mpcSolutionValid and not (EventName.laneChangeManual in self.events.names) and CS.steeringAngleDeg < 15:
self.events.add(EventName.plannerError)
if not self.sm['liveLocationKalman'].sensorsOK and not NOSENSOR:
if self.sm.frame > 5 / DT_CTRL: # Give locationd some time to receive all the inputs
self.events.add(EventName.sensorDataInvalid)
if not self.sm['liveLocationKalman'].posenetOK:
self.events.add(EventName.posenetInvalid)
if not self.sm['liveLocationKalman'].deviceStable:
self.events.add(EventName.deviceFalling)
if log.PandaState.FaultType.relayMalfunction in self.sm['pandaState'].faults:
self.events.add(EventName.relayMalfunction)
if self.sm['longitudinalPlan'].fcw:
self.events.add(EventName.fcw)
# TODO: fix simulator
if not SIMULATION:
#if not NOSENSOR:
# if not self.sm['liveLocationKalman'].gpsOK and (self.distance_traveled > 1000) and \
# (not TICI or self.enable_lte_onroad):
# # Not show in first 1 km to allow for driving out of garage. This event shows after 5 minutes
# self.events.add(EventName.noGps)
if not self.sm.all_alive(['roadCameraState', 'driverCameraState']):
self.events.add(EventName.cameraMalfunction)
if self.sm['modelV2'].frameDropPerc > 20:
self.events.add(EventName.modeldLagging)
# Check if all manager processes are running
not_running = set(p.name for p in self.sm['managerState'].processes if not p.running)
if self.sm.rcv_frame['managerState'] and (not_running - IGNORE_PROCESSES):
self.events.add(EventName.processNotRunning)
# Only allow engagement with brake pressed when stopped behind another stopped car
#if CS.brakePressed and self.sm['longitudinalPlan'].vTargetFuture >= STARTING_TARGET_SPEED \
# and self.CP.openpilotLongitudinalControl and CS.vEgo < 0.3:
# self.events.add(EventName.noTarget)
# ModelLongAlert
if Params().get_bool("ModelLongEnabled") and self.model_long_alert_prev:
self.events.add(EventName.modelLongAlert)
self.model_long_alert_prev = not self.model_long_alert_prev
elif not Params().get_bool("ModelLongEnabled"):
self.model_long_alert_prev = True
# atom
if self.auto_enabled:
self.auto_enable( CS )
def data_sample(self):
"""Receive data from sockets and update carState"""
# Update carState from CAN
can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True)
CS = self.CI.update(self.CC, can_strs)
self.sm.update(0)
all_valid = CS.canValid and self.sm.all_alive_and_valid()
if not self.initialized and (all_valid or self.sm.frame * DT_CTRL > 2.0):
self.initialized = True
Params().put_bool("ControlsReady", True)
# Check for CAN timeout
if not can_strs:
self.can_error_counter += 1
self.can_rcv_error = True
else:
self.can_rcv_error = False
# When the panda and controlsd do not agree on controls_allowed
# we want to disengage openpilot. However the status from the panda goes through
# another socket other than the CAN messages and one can arrive earlier than the other.
# Therefore we allow a mismatch for two samples, then we trigger the disengagement.
self.controlsAllowed = self.sm['pandaState'].controlsAllowed
if not self.enabled:
self.mismatch_counter = 0
elif not self.controlsAllowed and self.enabled:
self.mismatch_counter += 1
self.distance_traveled += CS.vEgo * DT_CTRL
return CS
def state_transition(self, CS):
"""Compute conditional state transitions and execute actions on state transitions"""
# if stock cruise is completely disabled, then we can use our own set speed logic
# self.CP.enableCruise is true
self.CP.enableCruise = self.CI.CP.enableCruise
if not self.CP.enableCruise:
self.v_cruise_kph = update_v_cruise(self.v_cruise_kph, CS.buttonEvents, self.enabled)
if int(CS.vSetDis)-1 > self.v_cruise_kph:
self.v_cruise_kph = int(CS.vSetDis)
elif self.CP.enableCruise and CS.cruiseState.enabled:
if Params().get_bool('OpkrVariableCruise') and CS.cruiseState.modeSel != 0 and self.CP.vCruisekph > 30:
self.v_cruise_kph = self.CP.vCruisekph
self.v_cruise_kph_last = self.v_cruise_kph
elif CS.cruiseButtons == Buttons.RES_ACCEL and Params().get_bool('OpkrVariableCruise') and CS.cruiseState.modeSel != 0 and CS.vSetDis < (self.v_cruise_kph_last - 1):
self.v_cruise_kph = self.v_cruise_kph_last
if int(CS.vSetDis)-1 > self.v_cruise_kph:
self.v_cruise_kph = int(CS.vSetDis)
elif CS.cruiseButtons == Buttons.RES_ACCEL and Params().get_bool('OpkrVariableCruise') and CS.cruiseState.modeSel != 0 and 30 <= self.v_cruise_kph_last <= round(CS.vEgo*CV.MS_TO_KPH):
self.v_cruise_kph = round(CS.vEgo*CV.MS_TO_KPH)
if int(CS.vSetDis)-1 > self.v_cruise_kph:
self.v_cruise_kph = int(CS.vSetDis)
self.v_cruise_kph_last = self.v_cruise_kph
elif CS.cruiseButtons == Buttons.RES_ACCEL or CS.cruiseButtons == Buttons.SET_DECEL:
self.v_cruise_kph = round(CS.cruiseState.speed * CV.MS_TO_KPH)
self.v_cruise_kph_last = self.v_cruise_kph
elif CS.driverAcc and Params().get_bool('OpkrVariableCruise') and Params().get_bool('CruiseOverMaxSpeed') and 30 <= self.v_cruise_kph < int(round(CS.vEgo*CV.MS_TO_KPH)):
self.v_cruise_kph = int(round(CS.vEgo*CV.MS_TO_KPH))
self.v_cruise_kph_last = self.v_cruise_kph
# decrease the soft disable timer at every step, as it's reset on
# entrance in SOFT_DISABLING state
self.soft_disable_timer = max(0, self.soft_disable_timer - 1)
self.current_alert_types = [ET.PERMANENT]
# ENABLED, PRE ENABLING, SOFT DISABLING
if self.state != State.disabled:
# user and immediate disable always have priority in a non-disabled state
if self.events.any(ET.USER_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.USER_DISABLE)
elif self.events.any(ET.IMMEDIATE_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.IMMEDIATE_DISABLE)
else:
# ENABLED
if self.state == State.enabled:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = 300 # 3s
self.current_alert_types.append(ET.SOFT_DISABLE)
# SOFT DISABLING
elif self.state == State.softDisabling:
if not self.events.any(ET.SOFT_DISABLE):
# no more soft disabling condition, so go back to ENABLED
self.state = State.enabled
elif self.events.any(ET.SOFT_DISABLE) and self.soft_disable_timer > 0:
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.soft_disable_timer <= 0:
self.state = State.disabled
# PRE ENABLING
elif self.state == State.preEnabled:
if not self.events.any(ET.PRE_ENABLE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.PRE_ENABLE)
# DISABLED
elif self.state == State.disabled:
if self.events.any(ET.ENABLE):
if self.events.any(ET.NO_ENTRY):
self.current_alert_types.append(ET.NO_ENTRY)
else:
if self.events.any(ET.PRE_ENABLE):
self.state = State.preEnabled
else:
self.state = State.enabled
self.current_alert_types.append(ET.ENABLE)
#self.v_cruise_kph = initialize_v_cruise(CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last)
self.v_cruise_kph = 0
self.v_cruise_kph_last = 0
# Check if actuators are enabled
self.active = self.state == State.enabled or self.state == State.softDisabling
if self.active:
self.current_alert_types.append(ET.WARNING)
# Check if openpilot is engaged
self.enabled = self.active or self.state == State.preEnabled
def state_control(self, CS):
"""Given the state, this function returns an actuators packet"""
lat_plan = self.sm['lateralPlan']
long_plan = self.sm['longitudinalPlan']
anglesteer_current = CS.steeringAngleDeg
anglesteer_desire = lat_plan.steerAngleDesireDeg
output_scale = lat_plan.outputScale
live_sr = Params().get_bool('OpkrLiveSteerRatio')
if not live_sr:
angle_diff = abs(anglesteer_desire) - abs(anglesteer_current)
if abs(output_scale) >= self.CP.steerMaxV[0] and CS.vEgo > 8:
self.new_steerRatio_prev = interp(angle_diff, self.angle_differ_range, self.steerRatio_range)
if self.new_steerRatio_prev > self.new_steerRatio:
self.new_steerRatio = self.new_steerRatio_prev
else:
self.mpc_frame += 1
if self.mpc_frame % 100 == 0:
self.new_steerRatio -= 0.1
if self.new_steerRatio <= self.CP.steerRatio:
self.new_steerRatio = self.CP.steerRatio
self.mpc_frame = 0
# Update VehicleModel
params = self.sm['liveParameters']
x = max(params.stiffnessFactor, 0.1)
if live_sr:
sr = max(params.steerRatio, 0.1)
else:
sr = max(self.new_steerRatio, 0.1)
self.VM.update_params(x, sr)
self.steerRatio_to_send = sr
actuators = car.CarControl.Actuators.new_message()
if CS.leftBlinker or CS.rightBlinker:
self.last_blinker_frame = self.sm.frame
# State specific actions
if not self.active:
self.LaC.reset()
self.LoC.reset(v_pid=CS.vEgo)
long_plan_age = DT_CTRL * (self.sm.frame - self.sm.rcv_frame['longitudinalPlan'])
# no greater than dt mpc + dt, to prevent too high extraps
dt = min(long_plan_age, LON_MPC_STEP + DT_CTRL) + DT_CTRL
a_acc_sol = long_plan.aStart + (dt / LON_MPC_STEP) * (long_plan.aTarget - long_plan.aStart)
v_acc_sol = long_plan.vStart + dt * (a_acc_sol + long_plan.aStart) / 2.0
extras_loc = {'lead_one': self.sm['radarState'].leadOne, 'has_lead': long_plan.hasLead}
# Gas/Brake PID loop
actuators.gas, actuators.brake = self.LoC.update(self.active and CS.cruiseState.speed > 1., CS, v_acc_sol, long_plan.vTargetFuture, long_plan.aTarget, a_acc_sol, self.CP, long_plan.hasLead, self.sm['radarState'], long_plan.longitudinalPlanSource, extras_loc)
# Steering PID loop and lateral MPC
actuators.steer, actuators.steeringAngleDeg, lac_log = self.LaC.update(self.active, CS, self.CP, self.VM, params, lat_plan)
# Check for difference between desired angle and angle for angle based control
angle_control_saturated = self.CP.steerControlType == car.CarParams.SteerControlType.angle and \
abs(actuators.steeringAngleDeg - CS.steeringAngleDeg) > STEER_ANGLE_SATURATION_THRESHOLD
if angle_control_saturated and not CS.steeringPressed and self.active:
self.saturated_count += 1
else:
self.saturated_count = 0
# Send a "steering required alert" if saturation count has reached the limit
if (lac_log.saturated and not CS.steeringPressed) or \
(self.saturated_count > STEER_ANGLE_SATURATION_TIMEOUT):
if len(lat_plan.dPathPoints):
# Check if we deviated from the path
left_deviation = actuators.steer > 0 and lat_plan.dPathPoints[0] < -0.1
right_deviation = actuators.steer < 0 and lat_plan.dPathPoints[0] > 0.1
if left_deviation or right_deviation:
self.events.add(EventName.steerSaturated)
return actuators, v_acc_sol, a_acc_sol, lac_log
def publish_logs(self, CS, start_time, actuators, v_acc, a_acc, lac_log):
"""Send actuators and hud commands to the car, send controlsstate and MPC logging"""
self.log_alertTextMsg1 = trace1.global_alertTextMsg1
self.log_alertTextMsg2 = trace1.global_alertTextMsg2
CC = car.CarControl.new_message()
CC.enabled = self.enabled
CC.actuators = actuators
CC.cruiseControl.override = True
CC.cruiseControl.cancel = self.CP.enableCruise and not self.enabled and CS.cruiseState.enabled
# Some override values for Honda
# brake discount removes a sharp nonlinearity
brake_discount = (1.0 - clip(actuators.brake * 3., 0.0, 1.0))
speed_override = max(0.0, (self.LoC.v_pid + CS.cruiseState.speedOffset) * brake_discount)
CC.cruiseControl.speedOverride = float(speed_override if self.CP.enableCruise else 0.0)
CC.cruiseControl.accelOverride = self.CI.calc_accel_override(CS.aEgo, self.sm['longitudinalPlan'].aTarget, CS.vEgo, self.sm['longitudinalPlan'].vTarget)
CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = self.enabled
CC.hudControl.lanesVisible = self.enabled
CC.hudControl.leadVisible = self.sm['longitudinalPlan'].hasLead
CC.hudControl.leadDistance = self.sm['radarState'].leadOne.dRel
CC.hudControl.leadvRel = self.sm['radarState'].leadOne.vRel
CC.hudControl.leadyRel = self.sm['radarState'].leadOne.yRel
right_lane_visible = self.sm['lateralPlan'].rProb > 0.5
left_lane_visible = self.sm['lateralPlan'].lProb > 0.5
CC.hudControl.rightLaneVisible = bool(right_lane_visible)
CC.hudControl.leftLaneVisible = bool(left_lane_visible)
recent_blinker = (self.sm.frame - self.last_blinker_frame) * DT_CTRL < 5.0 # 5s blinker cooldown
ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \
and not self.active and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED
meta = self.sm['modelV2'].meta
if len(meta.desirePrediction) and ldw_allowed:
l_lane_change_prob = meta.desirePrediction[Desire.laneChangeLeft - 1]
r_lane_change_prob = meta.desirePrediction[Desire.laneChangeRight - 1]
if CS.cruiseState.modeSel == 3:
l_lane_close = left_lane_visible and (self.sm['modelV2'].laneLines[1].y[0] > -(1.08 + CAMERA_OFFSET_A))
r_lane_close = right_lane_visible and (self.sm['modelV2'].laneLines[2].y[0] < (1.08 - CAMERA_OFFSET_A))
else:
l_lane_close = left_lane_visible and (self.sm['modelV2'].laneLines[1].y[0] > -(1.08 + CAMERA_OFFSET))
r_lane_close = right_lane_visible and (self.sm['modelV2'].laneLines[2].y[0] < (1.08 - CAMERA_OFFSET))
CC.hudControl.leftLaneDepart = bool(l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close)
CC.hudControl.rightLaneDepart = bool(r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close)
if CC.hudControl.rightLaneDepart or CC.hudControl.leftLaneDepart:
self.events.add(EventName.ldw)
clear_event = ET.WARNING if ET.WARNING not in self.current_alert_types else None
alerts = self.events.create_alerts(self.current_alert_types, [self.CP, self.sm, self.is_metric])
self.AM.add_many(self.sm.frame, alerts, self.enabled)
self.AM.process_alerts(self.sm.frame, clear_event)
CC.hudControl.visualAlert = self.AM.visual_alert
if not self.hyundai_lkas and self.enabled:
# send car controls over can
can_sends = self.CI.apply(CC, self.sm)
self.pm.send('sendcan', can_list_to_can_capnp(can_sends, msgtype='sendcan', valid=CS.canValid))
force_decel = (self.sm['driverMonitoringState'].awarenessStatus < 0.) or \
(self.state == State.softDisabling)
# Curvature & Steering angle
params = self.sm['liveParameters']
lat_plan = self.sm['lateralPlan']
steer_angle_without_offset = math.radians(CS.steeringAngleDeg - params.angleOffsetAverageDeg)
curvature = -self.VM.calc_curvature(steer_angle_without_offset, CS.vEgo)
angle_steers_des = math.degrees(self.VM.get_steer_from_curvature(-lat_plan.curvature, CS.vEgo))
angle_steers_des += params.angleOffsetDeg
# controlsState
dat = messaging.new_message('controlsState')
dat.valid = CS.canValid
controlsState = dat.controlsState
controlsState.alertText1 = self.AM.alert_text_1
controlsState.alertText2 = self.AM.alert_text_2
controlsState.alertSize = self.AM.alert_size
controlsState.alertStatus = self.AM.alert_status
controlsState.alertBlinkingRate = self.AM.alert_rate
controlsState.alertType = self.AM.alert_type
controlsState.alertSound = self.AM.audible_alert
controlsState.canMonoTimes = list(CS.canMonoTimes)
controlsState.longitudinalPlanMonoTime = self.sm.logMonoTime['longitudinalPlan']
controlsState.lateralPlanMonoTime = self.sm.logMonoTime['lateralPlan']
controlsState.enabled = self.enabled
controlsState.active = self.active
controlsState.curvature = curvature
controlsState.steeringAngleDesiredDeg = angle_steers_des
controlsState.state = self.state
controlsState.engageable = not self.events.any(ET.NO_ENTRY)
controlsState.longControlState = self.LoC.long_control_state
controlsState.vPid = float(self.LoC.v_pid)
controlsState.vCruise = float(self.v_cruise_kph)
controlsState.upAccelCmd = float(self.LoC.pid.p)
controlsState.uiAccelCmd = float(self.LoC.pid.id)
controlsState.ufAccelCmd = float(self.LoC.pid.f)
controlsState.vTargetLead = float(v_acc)
controlsState.aTarget = float(a_acc)
controlsState.cumLagMs = -self.rk.remaining * 1000.
controlsState.startMonoTime = int(start_time * 1e9)
controlsState.forceDecel = bool(force_decel)
controlsState.canErrorCounter = self.can_error_counter
controlsState.alertTextMsg1 = self.log_alertTextMsg1
controlsState.alertTextMsg2 = self.log_alertTextMsg2
controlsState.limitSpeedCamera = float(self.sm['longitudinalPlan'].targetSpeedCamera)
controlsState.limitSpeedCameraDist = float(self.sm['longitudinalPlan'].targetSpeedCameraDist)
controlsState.lateralControlMethod = int(self.lateral_control_method)
controlsState.steerRatio = float(self.steerRatio_to_send)
if self.sm['longitudinalPlan'].longitudinalPlanSource == LongitudinalPlanSource.cruise:
self.long_plan_source = 1
elif self.sm['longitudinalPlan'].longitudinalPlanSource == LongitudinalPlanSource.mpc1:
self.long_plan_source = 2
elif self.sm['longitudinalPlan'].longitudinalPlanSource == LongitudinalPlanSource.mpc2:
self.long_plan_source = 3
elif self.sm['longitudinalPlan'].longitudinalPlanSource == LongitudinalPlanSource.mpc3:
self.long_plan_source = 4
elif self.sm['longitudinalPlan'].longitudinalPlanSource == LongitudinalPlanSource.model:
self.long_plan_source = 5
else:
self.long_plan_source = 0
controlsState.longPlanSource = self.long_plan_source
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
controlsState.lateralControlState.angleState = lac_log
elif self.CP.lateralTuning.which() == 'pid':
controlsState.lateralControlState.pidState = lac_log
elif self.CP.lateralTuning.which() == 'lqr':
controlsState.lateralControlState.lqrState = lac_log
elif self.CP.lateralTuning.which() == 'indi':
controlsState.lateralControlState.indiState = lac_log
self.pm.send('controlsState', dat)
# carState
car_events = self.events.to_msg()
cs_send = messaging.new_message('carState')
cs_send.valid = CS.canValid
cs_send.carState = CS
cs_send.carState.events = car_events
self.pm.send('carState', cs_send)
# carEvents - logged every second or on change
if (self.sm.frame % int(1. / DT_CTRL) == 0) or (self.events.names != self.events_prev):
ce_send = messaging.new_message('carEvents', len(self.events))
ce_send.carEvents = car_events
self.pm.send('carEvents', ce_send)
self.events_prev = self.events.names.copy()
# carParams - logged every 50 seconds (> 1 per segment)
if (self.sm.frame % int(50. / DT_CTRL) == 0):
cp_send = messaging.new_message('carParams')
cp_send.carParams = self.CP
self.pm.send('carParams', cp_send)
# carControl
cc_send = messaging.new_message('carControl')
cc_send.valid = CS.canValid
cc_send.carControl = CC
self.pm.send('carControl', cc_send)
# copy CarControl to pass to CarInterface on the next iteration
self.CC = CC
def step(self):
start_time = sec_since_boot()
self.prof.checkpoint("Ratekeeper", ignore=True)
# Sample data from sockets and get a carState
CS = self.data_sample()
self.prof.checkpoint("Sample")
if self.read_only:
self.hyundai_lkas = self.read_only
elif CS.cruiseState.enabled and self.hyundai_lkas:
self.hyundai_lkas = False
self.update_events(CS)
if not self.hyundai_lkas:
# Update control state
self.state_transition(CS)
self.prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_acc, a_acc, lac_log = self.state_control(CS)
self.prof.checkpoint("State Control")
# Publish data
self.publish_logs(CS, start_time, actuators, v_acc, a_acc, lac_log)
self.prof.checkpoint("Sent")
if not CS.cruiseState.enabled and not self.hyundai_lkas:
self.hyundai_lkas = True
def controlsd_thread(self):
while True:
self.step()
self.rk.monitor_time()
self.prof.display()
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(4 if TICI else 3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster(['sendcan', 'controlsState', 'carState',
'carControl', 'carEvents', 'carParams'])
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'] if SIMULATION else None
self.sm = messaging.SubMaster(['deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan', 'liveLocationKalman',
'roadCameraState', 'driverCameraState', 'managerState', 'liveParameters', 'radarState'],
ignore_alive=ignore, ignore_avg_freq=['radarState', 'longitudinalPlan'])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one pandaState and one CAN packet
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'])
# read params
params = Params()
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
self.enable_lte_onroad = params.get_bool("EnableLteOnroad")
community_feature_toggle = params.get_bool("CommunityFeaturesToggle")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
self.commIssue_ignored = params.get_bool("ComIssueGone")
self.auto_enabled = params.get_bool("AutoEnable") and params.get_bool("MadModeEnabled")
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
fuzzy_fingerprint = self.CP.fuzzyFingerprint
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature = self.CP.communityFeature or fuzzy_fingerprint
community_feature_disallowed = community_feature and (not community_feature_toggle)
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
self.lateral_control_method = 0
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP)
self.lateral_control_method = 3
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
self.lateral_control_method = 0
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
self.lateral_control_method = 1
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.lateral_control_method = 2
self.long_plan_source = 0
self.controlsAllowed = False
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized, controller_available, fuzzy_fingerprint)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
#elif self.read_only:
# self.events.add(EventName.dashcamMode, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
self.hyundai_lkas = self.read_only #read_only
self.mpc_frame = 0
self.steerRatio_Max = float(int(params.get("SteerRatioMaxAdj", encoding="utf8")) * 0.1)
self.angle_differ_range = [0, 15]
self.steerRatio_range = [self.CP.steerRatio, self.steerRatio_Max]
self.new_steerRatio = self.CP.steerRatio
self.new_steerRatio_prev = self.CP.steerRatio
self.steerRatio_to_send = 0
self.model_long_alert_prev = True
self.delayed_comm_issue_timer = 0
def controlsd_thread(gctx, rate=100):
# start the loop
set_realtime_priority(3)
context = zmq.Context()
params = Params()
# pub
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
livempc = messaging.pub_sock(context, service_list['liveMpc'].port)
passive = params.get("Passive") != "0"
if not passive:
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
else:
sendcan = None
# sub
poller = zmq.Poller()
thermal = messaging.sub_sock(context,
service_list['thermal'].port,
conflate=True,
poller=poller)
health = messaging.sub_sock(context,
service_list['health'].port,
conflate=True,
poller=poller)
cal = messaging.sub_sock(context,
service_list['liveCalibration'].port,
conflate=True,
poller=poller)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan, 1.0 if passive else None)
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if CI is None:
raise Exception("unsupported car")
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
fcw_enabled = params.get("IsFcwEnabled") == "1"
PL = Planner(CP, fcw_enabled)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(VM)
AM = AlertManager()
if not passive:
AM.add("startup", False)
# write CarParams
params.put("CarParams", CP.to_bytes())
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
overtemp = False
free_space = False
cal_status = Calibration.UNCALIBRATED
rear_view_toggle = False
rear_view_allowed = params.get("IsRearViewMirror") == "1"
# 0.0 - 1.0
awareness_status = 1.
v_cruise_kph_last = 0
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
# learned angle offset
angle_offset = 1.5 # Default model bias
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
angle_offset = calibration_params["angle_offset"]
except (ValueError, KeyError):
pass
prof = Profiler(False) # off by default
while 1:
prof.checkpoint("Ratekeeper", ignore=True) # rk is here
# sample data and compute car events
CS, events, cal_status, overtemp, free_space = data_sample(
CI, CC, thermal, cal, health, poller, cal_status, overtemp,
free_space)
prof.checkpoint("Sample")
# define plan
plan, plan_ts = calc_plan(CS, events, PL, LoC, v_cruise_kph,
awareness_status)
prof.checkpoint("Plan")
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = state_transition(
CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# compute actuators
actuators, v_cruise_kph, awareness_status, angle_offset, rear_view_toggle = state_control(
plan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM,
rk, awareness_status, PL, LaC, LoC, VM, angle_offset,
rear_view_allowed, rear_view_toggle)
prof.checkpoint("State Control")
# publish data
CC = data_send(plan, plan_ts, CS, CI, CP, VM, state, events, actuators,
v_cruise_kph, rk, carstate, carcontrol, live100,
livempc, AM, rear_view_allowed, rear_view_toggle,
awareness_status, LaC, LoC, angle_offset, passive)
prof.checkpoint("Sent")
# *** run loop at fixed rate ***
rk.keep_time()
prof.display()
def controlsd_thread(sm=None, pm=None, can_sock=None):
gc.disable()
# start the loop
set_realtime_priority(3)
params = Params()
is_metric = params.get("IsMetric", encoding='utf8') == "1"
is_ldw_enabled = params.get("IsLdwEnabled", encoding='utf8') == "1"
passive = params.get("Passive", encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
passive = passive or not openpilot_enabled_toggle
# Passive if internet needed
internet_needed = params.get("Offroad_ConnectivityNeeded",
encoding='utf8') is not None
passive = passive or internet_needed
# Pub/Sub Sockets
if pm is None:
pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl', 'carEvents',
'carParams'
])
if sm is None:
sm = messaging.SubMaster(['thermal', 'health', 'liveCalibration', 'dMonitoringState', 'plan', 'pathPlan', \
'model'])
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100
can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for health and CAN packets
hw_type = messaging.recv_one(sm.sock['health']).health.hwType
has_relay = hw_type in [HwType.blackPanda, HwType.uno]
print("Waiting for CAN messages...")
messaging.get_one_can(can_sock)
CI, CP = get_car(can_sock, pm.sock['sendcan'], has_relay)
car_recognized = CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not chffrplus
controller_available = CP.enableCamera and CI.CC is not None and not passive
community_feature_disallowed = CP.communityFeature and not community_feature_toggle
read_only = not car_recognized or not controller_available or CP.dashcamOnly or community_feature_disallowed
if read_only:
CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
put_nonblocking("LongitudinalControl",
"1" if CP.openpilotLongitudinalControl else "0")
CC = car.CarControl.new_message()
AM = AlertManager()
startup_alert = get_startup_alert(car_recognized, controller_available)
AM.add(sm.frame, startup_alert, False)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
if CP.lateralTuning.which() == 'pid':
LaC = LatControlPID(CP)
elif CP.lateralTuning.which() == 'indi':
LaC = LatControlINDI(CP)
elif CP.lateralTuning.which() == 'lqr':
LaC = LatControlLQR(CP)
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
mismatch_counter = 0
can_error_counter = 0
last_blinker_frame = 0
saturated_count = 0
events_prev = []
sm['liveCalibration'].calStatus = Calibration.INVALID
sm['pathPlan'].sensorValid = True
sm['pathPlan'].posenetValid = True
sm['thermal'].freeSpace = 1.
sm['dMonitoringState'].events = []
sm['dMonitoringState'].awarenessStatus = 1.
sm['dMonitoringState'].faceDetected = False
# detect sound card presence
sounds_available = not os.path.isfile('/EON') or (
os.path.isdir('/proc/asound/card0')
and open('/proc/asound/card0/state').read().strip() == 'ONLINE')
# controlsd is driven by can recv, expected at 100Hz
rk = Ratekeeper(100, print_delay_threshold=None)
prof = Profiler(False) # off by default
# dp
ts_last_check = 0.
dragon_toyota_stock_dsu = False
dragon_lat_control = True
dragon_display_steering_limit_alert = True
dragon_stopped_has_lead_count = 0
dragon_lead_car_moving_alert = False
dp_last_modified = None
dp_camera_offset = CAMERA_OFFSET
dp_max_speed_limit = 92. * CV.MPH_TO_MS
while True:
start_time = sec_since_boot()
# dp
ts = start_time
if ts - ts_last_check >= 5.:
modified = get_last_modified()
if dp_last_modified != modified:
try:
dp_camera_offset = int(
params.get("DragonCameraOffset",
encoding='utf8')) * 0.01
except (TypeError, ValueError):
dp_camera_offset = CAMERA_OFFSET
try:
dp_max_speed_limit = float(
params.get("DragonMaxSpeedLimit",
encoding='utf8')) * CV.MPH_TO_MS
except (TypeError, ValueError):
dp_max_speed_limit = 92. * CV.MPH_TO_MS
dragon_toyota_stock_dsu = True if params.get(
"DragonToyotaStockDSU", encoding='utf8') == "1" else False
dragon_lat_control = False if params.get(
"DragonLatCtrl", encoding='utf8') == "0" else True
if dragon_lat_control:
dragon_display_steering_limit_alert = False if params.get(
"DragonDisplaySteeringLimitAlert",
encoding='utf8') == "0" else True
else:
dragon_display_steering_limit_alert = False
dragon_lead_car_moving_alert = True if params.get(
"DragonEnableLeadCarMovingAlert",
encoding='utf8') == "1" else False
dp_last_modified = modified
ts_last_check = ts
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_perc, mismatch_counter, can_error_counter = data_sample(
CI, CC, sm, can_sock, state, mismatch_counter, can_error_counter,
params, dragon_toyota_stock_dsu, dp_max_speed_limit)
prof.checkpoint("Sample")
# Create alerts
if not sm.alive['plan'] and sm.alive[
'pathPlan']: # only plan not being received: radar not communicating
events.append(
create_event('radarCommIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
elif not sm.all_alive_and_valid():
events.append(
create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not sm['pathPlan'].mpcSolutionValid:
events.append(
create_event('plannerError',
[ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not sm['pathPlan'].sensorValid and os.getenv("NOSENSOR") is None:
events.append(
create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT]))
if not sm['pathPlan'].paramsValid:
events.append(create_event('vehicleModelInvalid', [ET.WARNING]))
if not sm['pathPlan'].posenetValid:
events.append(
create_event('posenetInvalid', [ET.NO_ENTRY, ET.WARNING]))
if not sm['plan'].radarValid:
events.append(
create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if sm['plan'].radarCanError:
events.append(
create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not CS.canValid:
if dragon_toyota_stock_dsu:
events.append(create_event('pcmDisable', [ET.USER_DISABLE]))
else:
events.append(
create_event('canError',
[ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not sounds_available:
events.append(
create_event('soundsUnavailable', [ET.NO_ENTRY, ET.PERMANENT]))
if internet_needed:
events.append(
create_event('internetConnectivityNeeded',
[ET.NO_ENTRY, ET.PERMANENT]))
if community_feature_disallowed:
events.append(
create_event('communityFeatureDisallowed', [ET.PERMANENT]))
if read_only and not passive:
events.append(create_event('carUnrecognized', [ET.PERMANENT]))
if log.HealthData.FaultType.relayMalfunction in sm['health'].faults:
events.append(
create_event(
'relayMalfunction',
[ET.NO_ENTRY, ET.PERMANENT, ET.IMMEDIATE_DISABLE]))
# Only allow engagement with brake pressed when stopped behind another stopped car
if not dragon_toyota_stock_dsu and CS.brakePressed and sm[
'plan'].vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
events.append(
create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
# dp
if dragon_lead_car_moving_alert:
# when car has a lead and is standstill and lead is barely moving, we start counting
if not CP.radarOffCan and sm[
'plan'].hasLead and CS.vEgo <= 0.01 and 0.3 >= abs(
sm['plan'].vTarget) >= 0:
dragon_stopped_has_lead_count += 1
else:
dragon_stopped_has_lead_count = 0
# when we detect lead car over 3 secs and the lead car is started moving, we are ready to send alerts
# once the condition is triggered, we want to keep the trigger
if dragon_stopped_has_lead_count >= 300:
if abs(sm['plan'].vTargetFuture) >= 0.1:
events.append(create_event('leadCarMoving', [ET.WARNING]))
else:
events.append(create_event('leadCarDetected',
[ET.WARNING]))
# we remove alert once our car is moving
if CS.vEgo > 0.:
dragon_stopped_has_lead_count = 0
if not read_only:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, v_acc, a_acc, lac_log, last_blinker_frame, saturated_count = \
state_control(sm.frame, sm.rcv_frame, sm['plan'], sm['pathPlan'], CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk,
LaC, LoC, read_only, is_metric, cal_perc, last_blinker_frame, saturated_count, dragon_lat_control, dragon_display_steering_limit_alert, dragon_lead_car_moving_alert)
prof.checkpoint("State Control")
# Publish data
CC, events_prev = data_send(sm, pm, CS, CI, CP, VM, state, events,
actuators, v_cruise_kph, rk, AM, LaC, LoC,
read_only, start_time, v_acc, a_acc,
lac_log, events_prev, last_blinker_frame,
is_ldw_enabled, can_error_counter,
dp_camera_offset)
prof.checkpoint("Sent")
rk.monitor_time()
prof.display()
class Controls:
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(3, Priority.CTRL_HIGH)
self.op_params = opParams()
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'
] if SIMULATION else None
self.sm = messaging.SubMaster([
'deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan',
'liveLocationKalman', 'roadCameraState', 'driverCameraState',
'managerState', 'liveParameters', 'radarState'
],
ignore_alive=ignore)
self.sm_smiskol = messaging.SubMaster([
'radarState', 'dynamicFollowData', 'liveTracks',
'dynamicFollowButton', 'laneSpeed', 'dynamicCameraOffset',
'modelLongButton'
])
self.op_params = opParams()
self.df_manager = dfManager()
self.support_white_panda = self.op_params.get('support_white_panda')
self.last_model_long = False
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one pandaState and one CAN packet
panda_type = messaging.recv_one(
self.sm.sock['pandaState']).pandaState.pandaType
has_relay = panda_type in [
PandaType.blackPanda, PandaType.uno, PandaType.dos
]
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP, candidate = get_car(self.can_sock,
self.pm.sock['sendcan'],
has_relay)
threading.Thread(target=log_fingerprint, args=[candidate]).start()
# read params
params = Params()
self.is_metric = params.get("IsMetric", encoding='utf8') == "1"
self.is_ldw_enabled = params.get("IsLdwEnabled",
encoding='utf8') == "1"
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
passive = params.get(
"Passive", encoding='utf8') == "1" or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb, candidate)
self.VM = VehicleModel(self.CP)
if self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
self.sm['liveCalibration'].calStatus = Calibration.CALIBRATED
self.sm['deviceState'].freeSpacePercent = 100
self.sm['driverMonitoringState'].events = []
self.sm['driverMonitoringState'].awarenessStatus = 1.
self.sm['driverMonitoringState'].faceDetected = False
self.startup_event = get_startup_event(car_recognized,
controller_available)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
self.lead_rel_speed = 255
self.lead_long_dist = 255
def update_events(self, CS):
"""Compute carEvents from carState"""
self.events.clear()
self.events.add_from_msg(CS.events)
self.events.add_from_msg(self.sm['driverMonitoringState'].events)
# Handle startup event
if self.startup_event is not None:
self.events.add(self.startup_event)
self.startup_event = None
# Create events for battery, temperature, disk space, and memory
if self.sm['deviceState'].batteryPercent < 1 and self.sm[
'deviceState'].chargingError:
# at zero percent battery, while discharging, OP should not allowed
self.events.add(EventName.lowBattery)
if self.sm['deviceState'].thermalStatus >= ThermalStatus.red:
self.events.add(EventName.overheat)
if self.sm['deviceState'].freeSpacePercent < 7:
# under 7% of space free no enable allowed
self.events.add(EventName.outOfSpace)
if self.sm['deviceState'].memoryUsagePercent > 90:
self.events.add(EventName.lowMemory)
# Alert if fan isn't spinning for 5 seconds
if self.sm['pandaState'].pandaType in [PandaType.uno, PandaType.dos]:
if self.sm['pandaState'].fanSpeedRpm == 0 and self.sm[
'deviceState'].fanSpeedPercentDesired > 50:
if (self.sm.frame -
self.last_functional_fan_frame) * DT_CTRL > 5.0:
self.events.add(EventName.fanMalfunction)
else:
self.last_functional_fan_frame = self.sm.frame
# Handle calibration status
cal_status = self.sm['liveCalibration'].calStatus
if cal_status != Calibration.CALIBRATED:
if cal_status == Calibration.UNCALIBRATED:
self.events.add(EventName.calibrationIncomplete)
else:
self.events.add(EventName.calibrationInvalid)
# Handle lane change
if self.sm[
'lateralPlan'].laneChangeState == LaneChangeState.preLaneChange:
direction = self.sm['lateralPlan'].laneChangeDirection
if (CS.leftBlindspot and direction == LaneChangeDirection.left) or \
(CS.rightBlindspot and direction == LaneChangeDirection.right):
self.events.add(EventName.laneChangeBlocked)
else:
if direction == LaneChangeDirection.left:
self.events.add(EventName.preLaneChangeLeft)
else:
self.events.add(EventName.preLaneChangeRight)
elif self.sm['lateralPlan'].laneChangeState in [
LaneChangeState.laneChangeStarting,
LaneChangeState.laneChangeFinishing
]:
self.events.add(EventName.laneChange)
if self.can_rcv_error or (not CS.canValid
and self.sm.frame > 5 / DT_CTRL):
self.events.add(EventName.canError)
if (self.sm['pandaState'].safetyModel != self.CP.safetyModel and self.sm.frame > 2 / DT_CTRL) or \
self.mismatch_counter >= 200:
self.events.add(EventName.controlsMismatch)
if len(self.sm['radarState'].radarErrors):
self.events.add(EventName.radarFault)
elif not self.sm.valid['liveParameters']:
self.events.add(EventName.vehicleModelInvalid)
elif not self.sm.all_alive_and_valid():
self.events.add(EventName.commIssue)
if not self.logged_comm_issue:
cloudlog.error(
f"commIssue - valid: {self.sm.valid} - alive: {self.sm.alive}"
)
self.logged_comm_issue = True
else:
self.logged_comm_issue = False
if not self.sm['lateralPlan'].mpcSolutionValid:
self.events.add(EventName.plannerError)
if not self.sm['liveLocationKalman'].sensorsOK and not NOSENSOR:
if self.sm.frame > 5 / DT_CTRL: # Give locationd some time to receive all the inputs
self.events.add(EventName.sensorDataInvalid)
if not self.sm['liveLocationKalman'].posenetOK:
self.events.add(EventName.posenetInvalid)
if not self.sm['liveLocationKalman'].deviceStable:
self.events.add(EventName.deviceFalling)
if log.PandaState.FaultType.relayMalfunction in self.sm[
'pandaState'].faults:
self.events.add(EventName.relayMalfunction)
if self.sm['longitudinalPlan'].fcw:
self.events.add(EventName.fcw)
# TODO: fix simulator
# if not SIMULATION:
# if not NOSENSOR and not self.support_white_panda:
# if not self.sm['liveLocationKalman'].gpsOK and (self.distance_traveled > 1000) and not TICI:
# # Not show in first 1 km to allow for driving out of garage. This event shows after 5 minutes
# self.events.add(EventName.noGps)
if not self.sm.all_alive(['roadCameraState', 'driverCameraState'
]) and (self.sm.frame > 5 / DT_CTRL):
self.events.add(EventName.cameraMalfunction)
if self.sm['modelV2'].frameDropPerc > 20:
self.events.add(EventName.modeldLagging)
# Check if all manager processes are running
not_running = set(p.name for p in self.sm['managerState'].processes
if not p.running)
if self.sm.rcv_frame['managerState'] and (not_running -
IGNORE_PROCESSES):
self.events.add(EventName.processNotRunning)
# Only allow engagement with brake pressed when stopped behind another stopped car
if CS.brakePressed and self.sm['longitudinalPlan'].vTargetFuture >= STARTING_TARGET_SPEED \
and self.CP.openpilotLongitudinalControl and CS.vEgo < 0.3 and not self.last_model_long:
self.events.add(EventName.noTarget)
self.add_stock_additions_alerts(CS)
# vision-only fcw, can be disabled if radar is present
if self.sm.updated['radarState']:
self.lead_rel_speed = self.sm['radarState'].leadOne.vRel
self.lead_long_dist = self.sm['radarState'].leadOne.dRel
#if CS.cruiseState.enabled and self.lead_long_dist > 5 and self.lead_long_dist < 100 and self.lead_rel_speed <= -0.5 and CS.vEgo >= 5 and \
# ((self.lead_long_dist/abs(self.lead_rel_speed) < 2.) or (self.lead_long_dist/abs(self.lead_rel_speed) < 4. and self.lead_rel_speed < -10) or \
# (self.lead_long_dist/abs(self.lead_rel_speed) < 5. and self.lead_long_dist/CS.vEgo < 1.5)):
# self.events.add(EventName.fcw)
def add_stock_additions_alerts(self, CS):
self.AM.SA_set_frame(self.sm.frame)
self.AM.SA_set_enabled(self.enabled)
# alert priority is defined by code location, keeping is highest, then lane speed alert, then auto-df alert
if self.sm_smiskol['modelLongButton'].enabled != self.last_model_long:
extra_text_1 = 'disabled!' if self.last_model_long else 'enabled!'
extra_text_2 = '' if self.last_model_long else ', model may behave unexpectedly'
self.AM.SA_add('modelLongAlert',
extra_text_1=extra_text_1,
extra_text_2=extra_text_2)
return
if self.sm_smiskol['dynamicCameraOffset'].keepingLeft:
self.AM.SA_add('laneSpeedKeeping',
extra_text_1='LEFT',
extra_text_2='Oncoming traffic in right lane')
return
elif self.sm_smiskol['dynamicCameraOffset'].keepingRight:
self.AM.SA_add('laneSpeedKeeping',
extra_text_1='RIGHT',
extra_text_2='Oncoming traffic in left lane')
return
ls_state = self.sm_smiskol['laneSpeed'].state
if ls_state != '':
self.AM.SA_add('lsButtonAlert', extra_text_1=ls_state)
return
faster_lane = self.sm_smiskol['laneSpeed'].fastestLane
if faster_lane in ['left', 'right']:
ls_alert = 'laneSpeedAlert'
if not self.sm_smiskol['laneSpeed'].new:
ls_alert += 'Silent'
self.AM.SA_add(
ls_alert,
extra_text_1='{} lane faster'.format(faster_lane).upper(),
extra_text_2='Change lanes to faster {} lane'.format(
faster_lane))
return
df_out = self.df_manager.update()
if df_out.changed:
df_alert = 'dfButtonAlert'
if df_out.is_auto and df_out.last_is_auto:
# only show auto alert if engaged, not hiding auto, and time since lane speed alert not showing
if CS.cruiseState.enabled and not self.op_params.get(
'hide_auto_df_alerts'):
df_alert += 'Silent'
self.AM.SA_add(df_alert,
extra_text_1=df_out.model_profile_text +
' (auto)')
return
else:
self.AM.SA_add(
df_alert,
extra_text_1=df_out.user_profile_text,
extra_text_2='Dynamic follow: {} profile active'.format(
df_out.user_profile_text))
return
def data_sample(self):
"""Receive data from sockets and update carState"""
# Update carState from CAN
can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True)
CS = self.CI.update(self.CC, can_strs)
self.sm.update(0)
self.sm_smiskol.update(0)
# Check for CAN timeout
if not can_strs:
self.can_error_counter += 1
self.can_rcv_error = True
else:
self.can_rcv_error = False
# When the panda and controlsd do not agree on controls_allowed
# we want to disengage openpilot. However the status from the panda goes through
# another socket other than the CAN messages and one can arrive earlier than the other.
# Therefore we allow a mismatch for two samples, then we trigger the disengagement.
if not self.enabled:
self.mismatch_counter = 0
if not self.sm['pandaState'].controlsAllowed and self.enabled:
self.mismatch_counter += 1
self.distance_traveled += CS.vEgo * DT_CTRL
return CS
def state_transition(self, CS):
"""Compute conditional state transitions and execute actions on state transitions"""
self.v_cruise_kph_last = self.v_cruise_kph
# if stock cruise is completely disabled, then we can use our own set speed logic
if not self.CP.enableCruise:
self.v_cruise_kph = update_v_cruise(self.v_cruise_kph,
CS.buttonEvents, self.enabled)
elif self.CP.enableCruise and CS.cruiseState.enabled:
self.v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
# decrease the soft disable timer at every step, as it's reset on
# entrance in SOFT_DISABLING state
self.soft_disable_timer = max(0, self.soft_disable_timer - 1)
self.current_alert_types = [ET.PERMANENT]
# ENABLED, PRE ENABLING, SOFT DISABLING
if self.state != State.disabled:
# user and immediate disable always have priority in a non-disabled state
if self.events.any(ET.USER_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.USER_DISABLE)
elif self.events.any(ET.IMMEDIATE_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.IMMEDIATE_DISABLE)
else:
# ENABLED
if self.state == State.enabled:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = 300 # 3s
self.current_alert_types.append(ET.SOFT_DISABLE)
# SOFT DISABLING
elif self.state == State.softDisabling:
if not self.events.any(ET.SOFT_DISABLE):
# no more soft disabling condition, so go back to ENABLED
self.state = State.enabled
elif self.events.any(
ET.SOFT_DISABLE) and self.soft_disable_timer > 0:
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.soft_disable_timer <= 0:
self.state = State.disabled
# PRE ENABLING
elif self.state == State.preEnabled:
if not self.events.any(ET.PRE_ENABLE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.PRE_ENABLE)
# DISABLED
elif self.state == State.disabled:
if self.events.any(ET.ENABLE):
if self.events.any(ET.NO_ENTRY):
self.current_alert_types.append(ET.NO_ENTRY)
else:
if self.events.any(ET.PRE_ENABLE):
self.state = State.preEnabled
else:
self.state = State.enabled
self.current_alert_types.append(ET.ENABLE)
self.v_cruise_kph = initialize_v_cruise(
CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last)
# Check if actuators are enabled
self.active = self.state == State.enabled or self.state == State.softDisabling
if self.active:
self.current_alert_types.append(ET.WARNING)
# Check if openpilot is engaged
self.enabled = self.active or self.state == State.preEnabled
def state_control(self, CS):
"""Given the state, this function returns an actuators packet"""
lat_plan = self.sm['lateralPlan']
long_plan = self.sm['longitudinalPlan']
actuators = car.CarControl.Actuators.new_message()
if CS.leftBlinker or CS.rightBlinker:
self.last_blinker_frame = self.sm.frame
# State specific actions
if not self.active:
self.LaC.reset()
self.LoC.reset(v_pid=CS.vEgo)
long_plan_age = DT_CTRL * (self.sm.frame -
self.sm.rcv_frame['longitudinalPlan'])
# no greater than dt mpc + dt, to prevent too high extraps
dt = min(long_plan_age, LON_MPC_STEP + DT_CTRL) + DT_CTRL
a_acc_sol = long_plan.aStart + (dt / LON_MPC_STEP) * (
long_plan.aTarget - long_plan.aStart)
v_acc_sol = long_plan.vStart + dt * (a_acc_sol +
long_plan.aStart) / 2.0
extras_loc = {
'lead_one': self.sm_smiskol['radarState'].leadOne,
'mpc_TR': self.sm_smiskol['dynamicFollowData'].mpcTR,
'live_tracks': self.sm_smiskol['liveTracks'],
'has_lead': long_plan.hasLead
}
# Gas/Brake PID loop
actuators.gas, actuators.brake = self.LoC.update(
self.active, CS, v_acc_sol, long_plan.vTargetFuture, a_acc_sol,
self.CP, extras_loc)
# Steering PID loop and lateral MPC
actuators.steer, actuators.steeringAngleDeg, lac_log = self.LaC.update(
self.active, CS, self.CP, lat_plan)
# Check for difference between desired angle and angle for angle based control
angle_control_saturated = self.CP.steerControlType == car.CarParams.SteerControlType.angle and \
abs(actuators.steeringAngleDeg - CS.steeringAngleDeg) > STEER_ANGLE_SATURATION_THRESHOLD
if angle_control_saturated and not CS.steeringPressed and self.active:
self.saturated_count += 1
else:
self.saturated_count = 0
# Send a "steering required alert" if saturation count has reached the limit
if (lac_log.saturated and not CS.steeringPressed) or \
(self.saturated_count > STEER_ANGLE_SATURATION_TIMEOUT):
# Check if we deviated from the path
left_deviation = actuators.steer > 0 and lat_plan.dPathPoints[
0] < -0.1
right_deviation = actuators.steer < 0 and lat_plan.dPathPoints[
0] > 0.1
if left_deviation or right_deviation:
self.events.add(EventName.steerSaturated)
return actuators, v_acc_sol, a_acc_sol, lac_log
def publish_logs(self, CS, start_time, actuators, v_acc, a_acc, lac_log):
"""Send actuators and hud commands to the car, send controlsstate and MPC logging"""
CC = car.CarControl.new_message()
CC.enabled = self.enabled
CC.actuators = actuators
CC.cruiseControl.override = True
CC.cruiseControl.cancel = not self.CP.enableCruise or (
not self.enabled and CS.cruiseState.enabled)
# Some override values for Honda
# brake discount removes a sharp nonlinearity
brake_discount = (1.0 - clip(actuators.brake * 3., 0.0, 1.0))
speed_override = max(0.0,
(self.LoC.v_pid + CS.cruiseState.speedOffset) *
brake_discount)
CC.cruiseControl.speedOverride = float(
speed_override if self.CP.enableCruise else 0.0)
CC.cruiseControl.accelOverride = self.CI.calc_accel_override(
CS.aEgo, self.sm['longitudinalPlan'].aTarget, CS.vEgo,
self.sm['longitudinalPlan'].vTarget)
CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = self.enabled
CC.hudControl.lanesVisible = self.enabled
CC.hudControl.leadVisible = self.sm['longitudinalPlan'].hasLead
right_lane_visible = self.sm['lateralPlan'].rProb > 0.5
left_lane_visible = self.sm['lateralPlan'].lProb > 0.5
CC.hudControl.rightLaneVisible = bool(right_lane_visible)
CC.hudControl.leftLaneVisible = bool(left_lane_visible)
recent_blinker = (self.sm.frame - self.last_blinker_frame
) * DT_CTRL < 5.0 # 5s blinker cooldown
ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \
and (not self.active or CS.epsDisabled == True) and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED
meta = self.sm['modelV2'].meta
if len(meta.desirePrediction) and ldw_allowed:
l_lane_change_prob = meta.desirePrediction[Desire.laneChangeLeft -
1]
r_lane_change_prob = meta.desirePrediction[Desire.laneChangeRight -
1]
CAMERA_OFFSET = self.sm['lateralPlan'].cameraOffset
ldw_average_car_width = 1.750483672001016 # from sedans, suvs, and minivans (todo: find from all openpilot Toyotas instead)
ldw_m_from_wheel = 0.15
ldw_threshold = ldw_average_car_width / 2 + ldw_m_from_wheel
l_lane_close = left_lane_visible and (
self.sm['modelV2'].laneLines[1].y[0] >
-(ldw_threshold + CAMERA_OFFSET))
r_lane_close = right_lane_visible and (
self.sm['modelV2'].laneLines[2].y[0] <
(ldw_threshold - CAMERA_OFFSET))
CC.hudControl.leftLaneDepart = bool(
l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close)
CC.hudControl.rightLaneDepart = bool(
r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close)
if CC.hudControl.rightLaneDepart or CC.hudControl.leftLaneDepart:
self.events.add(EventName.ldw)
clear_event = ET.WARNING if ET.WARNING not in self.current_alert_types else None
alerts = self.events.create_alerts(self.current_alert_types,
[self.CP, self.sm, self.is_metric])
self.AM.add_many(self.sm.frame, alerts, self.enabled)
self.last_model_long = self.sm_smiskol['modelLongButton'].enabled
self.AM.process_alerts(self.sm.frame, clear_event)
CC.hudControl.visualAlert = self.AM.visual_alert
if not self.read_only:
# send car controls over can
can_sends = self.CI.apply(CC)
self.pm.send(
'sendcan',
can_list_to_can_capnp(can_sends,
msgtype='sendcan',
valid=CS.canValid))
force_decel = (self.sm['driverMonitoringState'].awarenessStatus < 0.) or \
(self.state == State.softDisabling)
steer_angle_rad = (
CS.steeringAngleDeg -
self.sm['lateralPlan'].angleOffsetDeg) * CV.DEG_TO_RAD
# controlsState
dat = messaging.new_message('controlsState')
dat.valid = CS.canValid
controlsState = dat.controlsState
controlsState.alertText1 = self.AM.alert_text_1
controlsState.alertText2 = self.AM.alert_text_2
controlsState.alertSize = self.AM.alert_size
controlsState.alertStatus = self.AM.alert_status
controlsState.alertBlinkingRate = self.AM.alert_rate
controlsState.alertType = self.AM.alert_type
controlsState.alertSound = self.AM.audible_alert
controlsState.canMonoTimes = list(CS.canMonoTimes)
controlsState.longitudinalPlanMonoTime = self.sm.logMonoTime[
'longitudinalPlan']
controlsState.lateralPlanMonoTime = self.sm.logMonoTime['lateralPlan']
controlsState.enabled = self.enabled
controlsState.active = self.active
controlsState.curvature = self.VM.calc_curvature(
steer_angle_rad, CS.vEgo)
controlsState.state = self.state
controlsState.engageable = not self.events.any(ET.NO_ENTRY)
controlsState.longControlState = self.LoC.long_control_state
controlsState.vPid = float(self.LoC.v_pid)
controlsState.vCruise = float(self.v_cruise_kph)
controlsState.upAccelCmd = float(self.LoC.pid.p)
controlsState.uiAccelCmd = float(self.LoC.pid.id)
controlsState.ufAccelCmd = float(self.LoC.pid.f)
controlsState.steeringAngleDesiredDeg = float(
self.LaC.angle_steers_des)
controlsState.vTargetLead = float(v_acc)
controlsState.aTarget = float(a_acc)
controlsState.cumLagMs = -self.rk.remaining * 1000.
controlsState.startMonoTime = int(start_time * 1e9)
controlsState.forceDecel = bool(force_decel)
controlsState.canErrorCounter = self.can_error_counter
if self.CP.lateralTuning.which() == 'pid':
controlsState.lateralControlState.pidState = lac_log
elif self.CP.lateralTuning.which() == 'lqr':
controlsState.lateralControlState.lqrState = lac_log
elif self.CP.lateralTuning.which() == 'indi':
controlsState.lateralControlState.indiState = lac_log
self.pm.send('controlsState', dat)
# carState
car_events = self.events.to_msg()
cs_send = messaging.new_message('carState')
cs_send.valid = CS.canValid
cs_send.carState = CS
cs_send.carState.events = car_events
self.pm.send('carState', cs_send)
# carEvents - logged every second or on change
if (self.sm.frame % int(1. / DT_CTRL)
== 0) or (self.events.names != self.events_prev):
ce_send = messaging.new_message('carEvents', len(self.events))
ce_send.carEvents = car_events
self.pm.send('carEvents', ce_send)
self.events_prev = self.events.names.copy()
# carParams - logged every 50 seconds (> 1 per segment)
if (self.sm.frame % int(50. / DT_CTRL) == 0):
cp_send = messaging.new_message('carParams')
cp_send.carParams = self.CP
self.pm.send('carParams', cp_send)
# carControl
cc_send = messaging.new_message('carControl')
cc_send.valid = CS.canValid
cc_send.carControl = CC
self.pm.send('carControl', cc_send)
# copy CarControl to pass to CarInterface on the next iteration
self.CC = CC
def step(self):
start_time = sec_since_boot()
self.prof.checkpoint("Ratekeeper", ignore=True)
# Sample data from sockets and get a carState
CS = self.data_sample()
self.prof.checkpoint("Sample")
self.update_events(CS)
if not self.read_only:
# Update control state
self.state_transition(CS)
self.prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_acc, a_acc, lac_log = self.state_control(CS)
self.prof.checkpoint("State Control")
# Publish data
self.publish_logs(CS, start_time, actuators, v_acc, a_acc, lac_log)
self.prof.checkpoint("Sent")
def controlsd_thread(self):
while True:
self.step()
self.rk.monitor_time()
self.prof.display()
def cycle_alerts(duration=200, is_metric=False):
# all alerts
#alerts = list(EVENTS.keys())
# this plays each type of audible alert
alerts = [
(EventName.buttonEnable, ET.ENABLE),
(EventName.buttonCancel, ET.USER_DISABLE),
(EventName.wrongGear, ET.NO_ENTRY),
(EventName.vehicleModelInvalid, ET.SOFT_DISABLE),
(EventName.accFaulted, ET.IMMEDIATE_DISABLE),
# DM sequence
(EventName.preDriverDistracted, ET.WARNING),
(EventName.promptDriverDistracted, ET.WARNING),
(EventName.driverDistracted, ET.WARNING),
]
CP = CarInterface.get_params("HONDA CIVIC 2016")
sm = messaging.SubMaster([
'deviceState', 'pandaStates', 'roadCameraState', 'modelV2',
'liveCalibration', 'driverMonitoringState', 'longitudinalPlan',
'lateralPlan', 'liveLocationKalman'
])
pm = messaging.PubMaster(['controlsState', 'pandaStates', 'deviceState'])
events = Events()
AM = AlertManager()
frame = 0
while True:
current_alert_types = [
ET.PERMANENT, ET.USER_DISABLE, ET.IMMEDIATE_DISABLE,
ET.SOFT_DISABLE, ET.PRE_ENABLE, ET.NO_ENTRY, ET.ENABLE, ET.WARNING
]
for alert, et in alerts:
events.clear()
events.add(alert)
a = events.create_alerts([
et,
], [CP, sm, is_metric])
AM.add_many(frame, a)
AM.process_alerts(frame)
print(AM.alert)
for _ in range(duration):
dat = messaging.new_message()
dat.init('controlsState')
dat.controlsState.enabled = True
dat.controlsState.alertText1 = AM.alert_text_1
dat.controlsState.alertText2 = AM.alert_text_2
dat.controlsState.alertSize = AM.alert_size
dat.controlsState.alertStatus = AM.alert_status
dat.controlsState.alertBlinkingRate = AM.alert_rate
dat.controlsState.alertType = AM.alert_type
dat.controlsState.alertSound = AM.audible_alert
pm.send('controlsState', dat)
dat = messaging.new_message()
dat.init('deviceState')
dat.deviceState.started = True
pm.send('deviceState', dat)
dat = messaging.new_message('pandaStates', 1)
dat.pandaStates[0].ignitionLine = True
dat.pandaStates[0].pandaType = log.PandaState.PandaType.uno
pm.send('pandaStates', dat)
frame += 1
time.sleep(DT_CTRL)
def __init__(self, sm=None, pm=None, can_sock=None):
gc.disable()
set_realtime_priority(3)
self.trace_log = trace1.Loger("controlsd")
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster(['sendcan', 'controlsState', 'carState', \
'carControl', 'carEvents', 'carParams'])
self.sm = sm
if self.sm is None:
socks = ['thermal', 'health', 'model', 'liveCalibration', 'dMonitoringState', 'plan', 'pathPlan', 'liveLocationKalman']
self.sm = messaging.SubMaster(socks, ignore_alive=['dMonitoringState'])
#self.sm = messaging.SubMaster(['thermal', 'health', 'model', 'liveCalibration', \
# 'dMonitoringState', 'plan', 'pathPlan', 'liveLocationKalman'])
print(" start_Controls messages...1")
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
print(" start_Controls messages...2")
# wait for one health and one CAN packet
hw_type = messaging.recv_one(self.sm.sock['health']).health.hwType
has_relay = hw_type in [HwType.blackPanda, HwType.uno]
print("Waiting for CAN messages...")
messaging.get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'], has_relay)
# read params
params = Params()
self.is_metric = params.get("IsMetric", encoding='utf8') == "1"
self.is_ldw_enabled = params.get("IsLdwEnabled", encoding='utf8') == "1"
internet_needed = params.get("Offroad_ConnectivityNeeded", encoding='utf8') is not None
community_feature_toggle = params.get("CommunityFeaturesToggle", encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle", encoding='utf8') == "1"
passive = params.get("Passive", encoding='utf8') == "1" or \
internet_needed or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = not os.path.isfile('/EON') or (os.path.isfile('/proc/asound/card0/state') \
and open('/proc/asound/card0/state').read().strip() == 'ONLINE')
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
put_nonblocking("LongitudinalControl", "1" if self.CP.openpilotLongitudinalControl else "0")
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
print( 'self.CP.lateralTuning.which()={}'.format( self.CP.lateralTuning.which() ) )
if self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.model_speed = 0
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.consecutive_can_error_count = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.events_prev = []
self.current_alert_types = []
self.sm['liveCalibration'].calStatus = Calibration.INVALID
self.sm['thermal'].freeSpace = 1.
self.sm['dMonitoringState'].events = []
self.sm['dMonitoringState'].awarenessStatus = 1.
self.sm['dMonitoringState'].faceDetected = False
self.startup_event = get_startup_event(car_recognized, controller_available, hw_type)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if internet_needed:
self.events.add(EventName.internetConnectivityNeeded, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if self.read_only and not passive:
self.events.add(EventName.carUnrecognized, static=True)
# if hw_type == HwType.whitePanda:
# self.events.add(EventName.whitePandaUnsupported, static=True)
uname = subprocess.check_output(["uname", "-v"], encoding='utf8').strip()
if uname == "#1 SMP PREEMPT Wed Jun 10 12:40:53 PDT 2020":
self.events.add(EventName.neosUpdateRequired, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
self.hyundai_lkas = self.read_only #read_only
self.init_flag = True
self.timer_alloowed = 1500
self.timer_start = 1500
def controlsd_thread(gctx=None, rate=100, default_bias=0.):
gc.disable()
# start the loop
set_realtime_priority(3)
context = zmq.Context()
params = Params()
# pub
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
livempc = messaging.pub_sock(context, service_list['liveMpc'].port)
passive = params.get("Passive") != "0"
if not passive:
while 1:
try:
sendcan = messaging.pub_sock(context,
service_list['sendcan'].port)
break
except zmq.error.ZMQError:
kill_defaultd()
else:
sendcan = None
# sub
poller = zmq.Poller()
thermal = messaging.sub_sock(context,
service_list['thermal'].port,
conflate=True,
poller=poller)
health = messaging.sub_sock(context,
service_list['health'].port,
conflate=True,
poller=poller)
cal = messaging.sub_sock(context,
service_list['liveCalibration'].port,
conflate=True,
poller=poller)
driver_monitor = messaging.sub_sock(context,
service_list['driverMonitoring'].port,
conflate=True,
poller=poller)
gps_location = messaging.sub_sock(context,
service_list['gpsLocationExternal'].port,
conflate=True,
poller=poller)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan, 1.0 if passive else None)
if CI is None:
raise Exception("unsupported car")
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
fcw_enabled = params.get("IsFcwEnabled") == "1"
geofence = None
try:
from selfdrive.controls.lib.geofence import Geofence
geofence = Geofence(params.get("IsGeofenceEnabled") == "1")
except ImportError:
# geofence not available
params.put("IsGeofenceEnabled", "-1")
PL = Planner(CP, fcw_enabled)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(VM)
AM = AlertManager()
driver_status = DriverStatus()
if not passive:
AM.add("startup", False)
# write CarParams
params.put("CarParams", CP.to_bytes())
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
overtemp = False
free_space = False
cal_status = Calibration.UNCALIBRATED
mismatch_counter = 0
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
# learned angle offset
angle_offset = default_bias
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
angle_offset = calibration_params["angle_offset2"]
except (ValueError, KeyError):
pass
prof = Profiler(False) # off by default
while 1:
prof.checkpoint("Ratekeeper", ignore=True)
# sample data and compute car events
CS, events, cal_status, overtemp, free_space, mismatch_counter = data_sample(
CI, CC, thermal, cal, health, driver_monitor, gps_location, poller,
cal_status, overtemp, free_space, driver_status, geofence, state,
mismatch_counter, params)
prof.checkpoint("Sample")
# define plan
plan, plan_ts = calc_plan(CS, CP, events, PL, LaC, LoC, v_cruise_kph,
driver_status, geofence)
prof.checkpoint("Plan")
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# compute actuators
actuators, v_cruise_kph, driver_status, angle_offset = state_control(
plan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM,
rk, driver_status, PL, LaC, LoC, VM, angle_offset, passive)
prof.checkpoint("State Control")
# publish data
CC = data_send(PL.perception_state, plan, plan_ts, CS, CI, CP, VM,
state, events, actuators, v_cruise_kph, rk, carstate,
carcontrol, live100, livempc, AM, driver_status, LaC,
LoC, angle_offset, passive)
prof.checkpoint("Sent")
# *** run loop at fixed rate ***
rk.keep_time()
prof.display()
def controlsd_thread(sm=None, pm=None, can_sock=None):
gc.disable()
# start the loop
set_realtime_priority(3)
params = Params()
is_metric = params.get("IsMetric", encoding='utf8') == "1"
is_ldw_enabled = params.get("IsLdwEnabled", encoding='utf8') == "1"
passive = params.get("Passive", encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
passive = passive or not openpilot_enabled_toggle
# Passive if internet needed
internet_needed = params.get("Offroad_ConnectivityNeeded",
encoding='utf8') is not None
passive = passive or internet_needed
# Pub/Sub Sockets
if pm is None:
pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl', 'carEvents',
'carParams'
])
if sm is None:
sm = messaging.SubMaster(['thermal', 'health', 'liveCalibration', 'dMonitoringState', 'plan', 'pathPlan', \
'model'])
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100
can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for health and CAN packets
hw_type = messaging.recv_one(sm.sock['health']).health.hwType
has_relay = hw_type in [HwType.blackPanda, HwType.uno]
print("Waiting for CAN messages...")
messaging.get_one_can(can_sock)
CI, CP = get_car(can_sock, pm.sock['sendcan'], has_relay)
car_recognized = CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not chffrplus
controller_available = CP.enableCamera and CI.CC is not None and not passive
community_feature_disallowed = CP.communityFeature and not community_feature_toggle
read_only = not car_recognized or not controller_available or CP.dashcamOnly or community_feature_disallowed
if read_only:
CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
put_nonblocking("LongitudinalControl",
"1" if CP.openpilotLongitudinalControl else "0")
CC = car.CarControl.new_message()
AM = AlertManager()
startup_alert = get_startup_alert(car_recognized, controller_available)
AM.add(sm.frame, startup_alert, False)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
if CP.lateralTuning.which() == 'pid':
LaC = LatControlPID(CP)
elif CP.lateralTuning.which() == 'indi':
LaC = LatControlINDI(CP)
elif CP.lateralTuning.which() == 'lqr':
LaC = LatControlLQR(CP)
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
mismatch_counter = 0
can_error_counter = 0
last_blinker_frame = 0
saturated_count = 0
events_prev = []
sm['liveCalibration'].calStatus = Calibration.INVALID
sm['pathPlan'].sensorValid = True
sm['pathPlan'].posenetValid = True
sm['thermal'].freeSpace = 1.
sm['dMonitoringState'].events = []
sm['dMonitoringState'].awarenessStatus = 1.
sm['dMonitoringState'].faceDetected = False
# detect sound card presence
sounds_available = not os.path.isfile('/EON') or (
os.path.isdir('/proc/asound/card0')
and open('/proc/asound/card0/state').read().strip() == 'ONLINE')
# controlsd is driven by can recv, expected at 100Hz
rk = Ratekeeper(100, print_delay_threshold=None)
prof = Profiler(False) # off by default
hyundai_lkas = read_only
while True:
start_time = sec_since_boot()
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_perc, mismatch_counter, can_error_counter = data_sample(
CI, CC, sm, can_sock, state, mismatch_counter, can_error_counter,
params)
if read_only:
hyundai_lkas = read_only
elif CS.cruiseState.enabled:
# elif state == State.enabled:
hyundai_lkas = False
prof.checkpoint("Sample")
# Create alerts
if not sm.alive['plan'] and sm.alive[
'pathPlan']: # only plan not being received: radar not communicating
events.append(
create_event('radarCommIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
elif not sm.all_alive_and_valid():
events.append(
create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not sm['pathPlan'].mpcSolutionValid:
events.append(
create_event('plannerError',
[ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not sm['pathPlan'].sensorValid and os.getenv("NOSENSOR") is None:
events.append(
create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT]))
if not sm['pathPlan'].paramsValid:
events.append(create_event('vehicleModelInvalid', [ET.WARNING]))
if not sm['pathPlan'].posenetValid:
events.append(
create_event('posenetInvalid', [ET.NO_ENTRY, ET.WARNING]))
if not sm['plan'].radarValid:
events.append(
create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if sm['plan'].radarCanError:
events.append(
create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not CS.canValid:
events.append(
create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not sounds_available:
events.append(
create_event('soundsUnavailable', [ET.NO_ENTRY, ET.PERMANENT]))
# if internet_needed:
# events.append(create_event('internetConnectivityNeeded', [ET.NO_ENTRY, ET.PERMANENT]))
# if community_feature_disallowed:
# events.append(create_event('communityFeatureDisallowed', [ET.PERMANENT]))
if read_only and not passive:
events.append(create_event('carUnrecognized', [ET.PERMANENT]))
if log.HealthData.FaultType.relayMalfunction in sm['health'].faults:
events.append(
create_event(
'relayMalfunction',
[ET.NO_ENTRY, ET.PERMANENT, ET.IMMEDIATE_DISABLE]))
# Only allow engagement with brake pressed when stopped behind another stopped car
if CS.brakePressed and sm[
'plan'].vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
events.append(
create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not hyundai_lkas:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, v_acc, a_acc, lac_log, last_blinker_frame, saturated_count = \
state_control(sm.frame, sm.rcv_frame, sm['plan'], sm['pathPlan'], CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk,
LaC, LoC, hyundai_lkas, is_metric, cal_perc, last_blinker_frame, saturated_count)
prof.checkpoint("State Control")
# Publish data
CC, events_prev = data_send(sm, pm, CS, CI, CP, VM, state, events,
actuators, v_cruise_kph, rk, AM, LaC, LoC,
hyundai_lkas, start_time, v_acc, a_acc,
lac_log, events_prev, last_blinker_frame,
is_ldw_enabled, can_error_counter)
prof.checkpoint("Sent")
rk.monitor_time()
prof.display()
if not CS.cruiseState.enabled:
# if state == State.disabled:
hyundai_lkas = True
class Controls:
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.sm = sm
if self.sm is None:
self.sm = messaging.SubMaster([
'thermal', 'health', 'model', 'liveCalibration',
'dMonitoringState', 'plan', 'pathPlan', 'liveLocationKalman'
])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one health and one CAN packet
hw_type = messaging.recv_one(self.sm.sock['health']).health.hwType
has_relay = hw_type in [HwType.blackPanda, HwType.uno, HwType.dos]
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'],
has_relay)
# read params
params = Params()
self.is_metric = params.get("IsMetric", encoding='utf8') == "1"
self.is_ldw_enabled = params.get("IsLdwEnabled",
encoding='utf8') == "1"
internet_needed = (params.get("Offroad_ConnectivityNeeded",
encoding='utf8') is not None) and (
params.get("DisableUpdates") != b"1")
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
passive = params.get("Passive", encoding='utf8') == "1" or \
internet_needed or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
if self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.sm['liveCalibration'].calStatus = Calibration.CALIBRATED
self.sm['thermal'].freeSpace = 1.
self.sm['dMonitoringState'].events = []
self.sm['dMonitoringState'].awarenessStatus = 1.
self.sm['dMonitoringState'].faceDetected = False
self.startup_event = get_startup_event(car_recognized,
controller_available, hw_type)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if internet_needed:
self.events.add(EventName.internetConnectivityNeeded, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
if hw_type == HwType.whitePanda:
self.events.add(EventName.whitePandaUnsupported, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def update_events(self, CS):
"""Compute carEvents from carState"""
self.events.clear()
self.events.add_from_msg(CS.events)
self.events.add_from_msg(self.sm['dMonitoringState'].events)
# Handle startup event
if self.startup_event is not None:
self.events.add(self.startup_event)
self.startup_event = None
# Create events for battery, temperature, disk space, and memory
if self.sm['thermal'].batteryPercent < 1 and self.sm[
'thermal'].chargingError:
# at zero percent battery, while discharging, OP should not allowed
self.events.add(EventName.lowBattery)
if self.sm['thermal'].thermalStatus >= ThermalStatus.red:
self.events.add(EventName.overheat)
if self.sm['thermal'].freeSpace < 0.07:
# under 7% of space free no enable allowed
self.events.add(EventName.outOfSpace)
if self.sm['thermal'].memUsedPercent > 90:
self.events.add(EventName.lowMemory)
# Alert if fan isn't spinning for 5 seconds
if self.sm['health'].hwType in [HwType.uno, HwType.dos]:
if self.sm['health'].fanSpeedRpm == 0 and self.sm[
'thermal'].fanSpeed > 50:
if (self.sm.frame -
self.last_functional_fan_frame) * DT_CTRL > 5.0:
self.events.add(EventName.fanMalfunction)
else:
self.last_functional_fan_frame = self.sm.frame
# Handle calibration status
cal_status = self.sm['liveCalibration'].calStatus
if cal_status != Calibration.CALIBRATED:
if cal_status == Calibration.UNCALIBRATED:
self.events.add(EventName.calibrationIncomplete)
else:
self.events.add(EventName.calibrationInvalid)
# Handle lane change
if self.sm[
'pathPlan'].laneChangeState == LaneChangeState.preLaneChange:
direction = self.sm['pathPlan'].laneChangeDirection
if (CS.leftBlindspot and direction == LaneChangeDirection.left) or \
(CS.rightBlindspot and direction == LaneChangeDirection.right):
self.events.add(EventName.laneChangeBlocked)
else:
if direction == LaneChangeDirection.left:
self.events.add(EventName.preLaneChangeLeft)
else:
self.events.add(EventName.preLaneChangeRight)
elif self.sm['pathPlan'].laneChangeState in [
LaneChangeState.laneChangeStarting,
LaneChangeState.laneChangeFinishing
]:
self.events.add(EventName.laneChange)
if self.can_rcv_error or (not CS.canValid
and self.sm.frame > 5 / DT_CTRL):
self.events.add(EventName.canError)
if self.mismatch_counter >= 200:
self.events.add(EventName.controlsMismatch)
if not self.sm.alive['plan'] and self.sm.alive['pathPlan']:
# only plan not being received: radar not communicating
self.events.add(EventName.radarCommIssue)
elif not self.sm.all_alive_and_valid():
self.events.add(EventName.commIssue)
if not self.sm['pathPlan'].mpcSolutionValid:
self.events.add(EventName.plannerError)
if not self.sm['liveLocationKalman'].sensorsOK and not NOSENSOR:
if self.sm.frame > 5 / DT_CTRL: # Give locationd some time to receive all the inputs
self.events.add(EventName.sensorDataInvalid)
if not self.sm['liveLocationKalman'].gpsOK and (self.distance_traveled
> 1000):
# Not show in first 1 km to allow for driving out of garage. This event shows after 5 minutes
if not (SIMULATION or NOSENSOR): # TODO: send GPS in carla
self.events.add(EventName.noGps)
if not self.sm['pathPlan'].paramsValid:
self.events.add(EventName.vehicleModelInvalid)
if not self.sm['liveLocationKalman'].posenetOK:
self.events.add(EventName.posenetInvalid)
if not self.sm['liveLocationKalman'].deviceStable:
self.events.add(EventName.deviceFalling)
if not self.sm['plan'].radarValid:
self.events.add(EventName.radarFault)
if self.sm['plan'].radarCanError:
self.events.add(EventName.radarCanError)
if log.HealthData.FaultType.relayMalfunction in self.sm[
'health'].faults:
self.events.add(EventName.relayMalfunction)
if self.sm['plan'].fcw:
self.events.add(EventName.fcw)
if self.sm['model'].frameDropPerc > 1 and (not SIMULATION):
self.events.add(EventName.modeldLagging)
# Only allow engagement with brake pressed when stopped behind another stopped car
if CS.brakePressed and self.sm['plan'].vTargetFuture >= STARTING_TARGET_SPEED \
and self.CP.openpilotLongitudinalControl and CS.vEgo < 0.3:
# self.events.add(EventName.noTarget)
pass
def data_sample(self):
"""Receive data from sockets and update carState"""
# Update carState from CAN
can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True)
CS = self.CI.update(self.CC, can_strs)
self.sm.update(0)
# Check for CAN timeout
if not can_strs:
self.can_error_counter += 1
self.can_rcv_error = True
else:
self.can_rcv_error = False
# When the panda and controlsd do not agree on controls_allowed
# we want to disengage openpilot. However the status from the panda goes through
# another socket other than the CAN messages and one can arrive earlier than the other.
# Therefore we allow a mismatch for two samples, then we trigger the disengagement.
if not self.enabled:
self.mismatch_counter = 0
if not self.sm['health'].controlsAllowed and self.enabled:
self.mismatch_counter += 1
self.distance_traveled += CS.vEgo * DT_CTRL
return CS
def state_transition(self, CS):
"""Compute conditional state transitions and execute actions on state transitions"""
self.v_cruise_kph_last = self.v_cruise_kph
# if stock cruise is completely disabled, then we can use our own set speed logic
if not self.CP.enableCruise:
self.v_cruise_kph = update_v_cruise(self.v_cruise_kph,
CS.buttonEvents, self.enabled)
elif self.CP.enableCruise and CS.cruiseState.enabled:
self.v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
# decrease the soft disable timer at every step, as it's reset on
# entrance in SOFT_DISABLING state
self.soft_disable_timer = max(0, self.soft_disable_timer - 1)
self.current_alert_types = [ET.PERMANENT]
# ENABLED, PRE ENABLING, SOFT DISABLING
if self.state != State.disabled:
# user and immediate disable always have priority in a non-disabled state
if self.events.any(ET.USER_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.USER_DISABLE)
elif self.events.any(ET.IMMEDIATE_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.IMMEDIATE_DISABLE)
else:
# ENABLED
if self.state == State.enabled:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = 300 # 3s
self.current_alert_types.append(ET.SOFT_DISABLE)
# SOFT DISABLING
elif self.state == State.softDisabling:
if not self.events.any(ET.SOFT_DISABLE):
# no more soft disabling condition, so go back to ENABLED
self.state = State.enabled
elif self.events.any(
ET.SOFT_DISABLE) and self.soft_disable_timer > 0:
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.soft_disable_timer <= 0:
self.state = State.disabled
# PRE ENABLING
elif self.state == State.preEnabled:
if not self.events.any(ET.PRE_ENABLE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.PRE_ENABLE)
# DISABLED
elif self.state == State.disabled:
if self.events.any(ET.ENABLE):
if self.events.any(ET.NO_ENTRY):
self.current_alert_types.append(ET.NO_ENTRY)
else:
if self.events.any(ET.PRE_ENABLE):
self.state = State.preEnabled
else:
self.state = State.enabled
self.current_alert_types.append(ET.ENABLE)
self.v_cruise_kph = initialize_v_cruise(
CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last)
# Check if actuators are enabled
self.active = self.state == State.enabled or self.state == State.softDisabling
if self.active:
self.current_alert_types.append(ET.WARNING)
# Check if openpilot is engaged
self.enabled = self.active or self.state == State.preEnabled
def state_control(self, CS):
"""Given the state, this function returns an actuators packet"""
plan = self.sm['plan']
path_plan = self.sm['pathPlan']
actuators = car.CarControl.Actuators.new_message()
if CS.leftBlinker or CS.rightBlinker:
self.last_blinker_frame = self.sm.frame
# State specific actions
if not self.active:
self.LaC.reset()
self.LoC.reset(v_pid=CS.vEgo)
plan_age = DT_CTRL * (self.sm.frame - self.sm.rcv_frame['plan'])
# no greater than dt mpc + dt, to prevent too high extraps
dt = min(plan_age, LON_MPC_STEP + DT_CTRL) + DT_CTRL
a_acc_sol = plan.aStart + (dt / LON_MPC_STEP) * (plan.aTarget -
plan.aStart)
v_acc_sol = plan.vStart + dt * (a_acc_sol + plan.aStart) / 2.0
# Gas/Brake PID loop
actuators.gas, actuators.brake = self.LoC.update(
self.active, CS, v_acc_sol, plan.vTargetFuture, a_acc_sol, self.CP)
# Steering PID loop and lateral MPC
actuators.steer, actuators.steerAngle, lac_log = self.LaC.update(
self.active, CS, self.CP, path_plan)
# Check for difference between desired angle and angle for angle based control
angle_control_saturated = self.CP.steerControlType == car.CarParams.SteerControlType.angle and \
abs(actuators.steerAngle - CS.steeringAngle) > STEER_ANGLE_SATURATION_THRESHOLD
if angle_control_saturated and not CS.steeringPressed and self.active:
self.saturated_count += 1
else:
self.saturated_count = 0
# Send a "steering required alert" if saturation count has reached the limit
if (lac_log.saturated and not CS.steeringPressed) or \
(self.saturated_count > STEER_ANGLE_SATURATION_TIMEOUT):
# Check if we deviated from the path
left_deviation = actuators.steer > 0 and path_plan.dPoly[3] > 0.1
right_deviation = actuators.steer < 0 and path_plan.dPoly[3] < -0.1
if left_deviation or right_deviation:
self.events.add(EventName.steerSaturated)
return actuators, v_acc_sol, a_acc_sol, lac_log
def publish_logs(self, CS, start_time, actuators, v_acc, a_acc, lac_log):
"""Send actuators and hud commands to the car, send controlsstate and MPC logging"""
CC = car.CarControl.new_message()
CC.enabled = self.enabled
CC.actuators = actuators
CC.cruiseControl.override = True
CC.cruiseControl.cancel = not self.CP.enableCruise or (
not self.enabled and CS.cruiseState.enabled)
# Some override values for Honda
# brake discount removes a sharp nonlinearity
brake_discount = (1.0 - clip(actuators.brake * 3., 0.0, 1.0))
speed_override = max(0.0,
(self.LoC.v_pid + CS.cruiseState.speedOffset) *
brake_discount)
CC.cruiseControl.speedOverride = float(
speed_override if self.CP.enableCruise else 0.0)
CC.cruiseControl.accelOverride = self.CI.calc_accel_override(
CS.aEgo, self.sm['plan'].aTarget, CS.vEgo, self.sm['plan'].vTarget)
CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = self.enabled
CC.hudControl.lanesVisible = self.enabled
CC.hudControl.leadVisible = self.sm['plan'].hasLead
right_lane_visible = self.sm['pathPlan'].rProb > 0.5
left_lane_visible = self.sm['pathPlan'].lProb > 0.5
CC.hudControl.rightLaneVisible = bool(right_lane_visible)
CC.hudControl.leftLaneVisible = bool(left_lane_visible)
recent_blinker = (self.sm.frame - self.last_blinker_frame
) * DT_CTRL < 5.0 # 5s blinker cooldown
ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \
and not self.active and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED
meta = self.sm['model'].meta
if len(meta.desirePrediction) and ldw_allowed:
l_lane_change_prob = meta.desirePrediction[Desire.laneChangeLeft -
1]
r_lane_change_prob = meta.desirePrediction[Desire.laneChangeRight -
1]
l_lane_close = left_lane_visible and (self.sm['pathPlan'].lPoly[3]
< (1.08 - CAMERA_OFFSET))
r_lane_close = right_lane_visible and (self.sm['pathPlan'].rPoly[3]
> -(1.08 + CAMERA_OFFSET))
CC.hudControl.leftLaneDepart = bool(
l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close)
CC.hudControl.rightLaneDepart = bool(
r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close)
if CC.hudControl.rightLaneDepart or CC.hudControl.leftLaneDepart:
self.events.add(EventName.ldw)
clear_event = ET.WARNING if ET.WARNING not in self.current_alert_types else None
alerts = self.events.create_alerts(self.current_alert_types,
[self.CP, self.sm, self.is_metric])
self.AM.add_many(self.sm.frame, alerts, self.enabled)
self.AM.process_alerts(self.sm.frame, clear_event)
CC.hudControl.visualAlert = self.AM.visual_alert
if not self.read_only:
# send car controls over can
can_sends = self.CI.apply(CC)
self.pm.send(
'sendcan',
can_list_to_can_capnp(can_sends,
msgtype='sendcan',
valid=CS.canValid))
force_decel = (self.sm['dMonitoringState'].awarenessStatus < 0.) or \
(self.state == State.softDisabling)
steer_angle_rad = (CS.steeringAngle -
self.sm['pathPlan'].angleOffset) * CV.DEG_TO_RAD
# controlsState
dat = messaging.new_message('controlsState')
dat.valid = CS.canValid
controlsState = dat.controlsState
controlsState.alertText1 = self.AM.alert_text_1
controlsState.alertText2 = self.AM.alert_text_2
controlsState.alertSize = self.AM.alert_size
controlsState.alertStatus = self.AM.alert_status
controlsState.alertBlinkingRate = self.AM.alert_rate
controlsState.alertType = self.AM.alert_type
controlsState.alertSound = self.AM.audible_alert
controlsState.driverMonitoringOn = self.sm[
'dMonitoringState'].faceDetected
controlsState.canMonoTimes = list(CS.canMonoTimes)
controlsState.planMonoTime = self.sm.logMonoTime['plan']
controlsState.pathPlanMonoTime = self.sm.logMonoTime['pathPlan']
controlsState.enabled = self.enabled
controlsState.active = self.active
controlsState.vEgo = CS.vEgo
controlsState.vEgoRaw = CS.vEgoRaw
controlsState.angleSteers = CS.steeringAngle
controlsState.curvature = self.VM.calc_curvature(
steer_angle_rad, CS.vEgo)
controlsState.steerOverride = CS.steeringPressed
controlsState.state = self.state
controlsState.engageable = not self.events.any(ET.NO_ENTRY)
controlsState.longControlState = self.LoC.long_control_state
controlsState.vPid = float(self.LoC.v_pid)
controlsState.vCruise = float(self.v_cruise_kph)
controlsState.upAccelCmd = float(self.LoC.pid.p)
controlsState.uiAccelCmd = float(self.LoC.pid.i)
controlsState.ufAccelCmd = float(self.LoC.pid.f)
controlsState.angleSteersDes = float(self.LaC.angle_steers_des)
controlsState.vTargetLead = float(v_acc)
controlsState.aTarget = float(a_acc)
controlsState.jerkFactor = float(self.sm['plan'].jerkFactor)
controlsState.gpsPlannerActive = self.sm['plan'].gpsPlannerActive
controlsState.vCurvature = self.sm['plan'].vCurvature
controlsState.decelForModel = self.sm[
'plan'].longitudinalPlanSource == LongitudinalPlanSource.model
controlsState.cumLagMs = -self.rk.remaining * 1000.
controlsState.startMonoTime = int(start_time * 1e9)
controlsState.mapValid = self.sm['plan'].mapValid
controlsState.forceDecel = bool(force_decel)
controlsState.canErrorCounter = self.can_error_counter
if self.CP.lateralTuning.which() == 'pid':
controlsState.lateralControlState.pidState = lac_log
elif self.CP.lateralTuning.which() == 'lqr':
controlsState.lateralControlState.lqrState = lac_log
elif self.CP.lateralTuning.which() == 'indi':
controlsState.lateralControlState.indiState = lac_log
self.pm.send('controlsState', dat)
# carState
car_events = self.events.to_msg()
cs_send = messaging.new_message('carState')
cs_send.valid = CS.canValid
cs_send.carState = CS
cs_send.carState.events = car_events
self.pm.send('carState', cs_send)
# carEvents - logged every second or on change
if (self.sm.frame % int(1. / DT_CTRL)
== 0) or (self.events.names != self.events_prev):
ce_send = messaging.new_message('carEvents', len(self.events))
ce_send.carEvents = car_events
self.pm.send('carEvents', ce_send)
self.events_prev = self.events.names.copy()
# carParams - logged every 50 seconds (> 1 per segment)
if (self.sm.frame % int(50. / DT_CTRL) == 0):
cp_send = messaging.new_message('carParams')
cp_send.carParams = self.CP
self.pm.send('carParams', cp_send)
# carControl
cc_send = messaging.new_message('carControl')
cc_send.valid = CS.canValid
cc_send.carControl = CC
self.pm.send('carControl', cc_send)
# copy CarControl to pass to CarInterface on the next iteration
self.CC = CC
def step(self):
start_time = sec_since_boot()
self.prof.checkpoint("Ratekeeper", ignore=True)
# Sample data from sockets and get a carState
CS = self.data_sample()
self.prof.checkpoint("Sample")
self.update_events(CS)
if not self.read_only:
# Update control state
self.state_transition(CS)
self.prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_acc, a_acc, lac_log = self.state_control(CS)
self.prof.checkpoint("State Control")
# Publish data
self.publish_logs(CS, start_time, actuators, v_acc, a_acc, lac_log)
self.prof.checkpoint("Sent")
def controlsd_thread(self):
while True:
self.step()
self.rk.monitor_time()
self.prof.display()
def controlsd_thread(gctx=None, rate=100):
gc.disable()
# start the loop
set_realtime_priority(3)
context = zmq.Context()
params = Params()
# Pub Sockets
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
is_metric = params.get("IsMetric") == "1"
passive = params.get("Passive") != "0"
# No sendcan if passive
if not passive:
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
else:
sendcan = None
# Sub sockets
poller = zmq.Poller()
thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller)
health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller)
cal = messaging.sub_sock(context, service_list['liveCalibration'].port, conflate=True, poller=poller)
driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller)
plan_sock = messaging.sub_sock(context, service_list['plan'].port, conflate=True, poller=poller)
path_plan_sock = messaging.sub_sock(context, service_list['pathPlan'].port, conflate=True, poller=poller)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan, 1.0 if passive else None)
if CI is None:
raise Exception("unsupported car")
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(CP)
AM = AlertManager()
driver_status = DriverStatus()
if not passive:
AM.add("startup", False)
# Write CarParams for radard and boardd safety mode
params.put("CarParams", CP.to_bytes())
params.put("LongitudinalControl", "1" if CP.openpilotLongitudinalControl else "0")
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
overtemp = False
free_space = False
cal_status = Calibration.INVALID
cal_perc = 0
mismatch_counter = 0
low_battery = False
plan = messaging.new_message()
plan.init('plan')
path_plan = messaging.new_message()
path_plan.init('pathPlan')
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
controls_params = params.get("ControlsParams")
# Read angle offset from previous drive
angle_model_bias = 0.
if controls_params is not None:
try:
controls_params = json.loads(controls_params)
angle_model_bias = controls_params['angle_model_bias']
except (ValueError, KeyError):
pass
prof = Profiler(False) # off by default
while True:
start_time = int(sec_since_boot() * 1e9)
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter, plan, path_plan =\
data_sample(CI, CC, plan_sock, path_plan_sock, thermal, cal, health, driver_monitor,
poller, cal_status, cal_perc, overtemp, free_space, low_battery, driver_status,
state, mismatch_counter, params, plan, path_plan)
prof.checkpoint("Sample")
path_plan_age = (start_time - path_plan.logMonoTime) / 1e9
plan_age = (start_time - plan.logMonoTime) / 1e9
if not path_plan.pathPlan.valid or plan_age > 0.5 or path_plan_age > 0.5:
events.append(create_event('plannerError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not path_plan.pathPlan.paramsValid:
events.append(create_event('vehicleModelInvalid', [ET.WARNING]))
events += list(plan.plan.events)
# Only allow engagement with brake pressed when stopped behind another stopped car
if CS.brakePressed and plan.plan.vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
events.append(create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, driver_status, angle_model_bias, v_acc, a_acc = \
state_control(plan.plan, path_plan.pathPlan, CS, CP, state, events, v_cruise_kph,
v_cruise_kph_last, AM, rk, driver_status,
LaC, LoC, VM, angle_model_bias, passive, is_metric, cal_perc)
prof.checkpoint("State Control")
# Publish data
CC = data_send(plan, path_plan, CS, CI, CP, VM, state, events, actuators, v_cruise_kph, rk, carstate, carcontrol,
live100, AM, driver_status, LaC, LoC, angle_model_bias, passive, start_time, v_acc, a_acc)
prof.checkpoint("Sent")
rk.keep_time() # Run at 100Hz
prof.display()
class Controls:
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(4 if TICI else 3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.camera_packets = ["roadCameraState", "driverCameraState"]
if TICI:
self.camera_packets.append("wideRoadCameraState")
params = Params()
self.joystick_mode = params.get_bool("JoystickDebugMode")
joystick_packet = ['testJoystick'] if self.joystick_mode else []
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'
] if SIMULATION else None
self.sm = messaging.SubMaster(
[
'deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan',
'liveLocationKalman', 'managerState', 'liveParameters',
'radarState'
] + self.camera_packets + joystick_packet,
ignore_alive=ignore,
ignore_avg_freq=['radarState', 'longitudinalPlan'])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
if TICI:
self.log_sock = messaging.sub_sock('androidLog')
# wait for one pandaState and one CAN packet
hw_type = messaging.recv_one(
self.sm.sock['pandaState']).pandaState.pandaType
has_relay = hw_type in [
PandaType.blackPanda, PandaType.uno, PandaType.dos
]
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'],
has_relay)
# read params
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
community_feature_toggle = params.get_bool("CommunityFeaturesToggle")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
controller_available = self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature = self.CP.communityFeature or \
self.CP.fingerprintSource == car.CarParams.FingerprintSource.can
community_feature_disallowed = community_feature and (
not community_feature_toggle)
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP)
self.VM = VehicleModel(self.CP)
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
self.v_target = 0.0
self.a_target = 0.0
# scc smoother
self.is_cruise_enabled = False
self.applyMaxSpeed = 0
self.clu_speed_ms = 0.
self.apply_accel = 0.
self.fused_accel = 0.
self.lead_drel = 0.
self.aReqValue = 0.
self.aReqValueMin = 0.
self.aReqValueMax = 0.
self.sccStockCamStatus = 0
self.sccStockCamAct = 0
self.left_lane_visible = False
self.right_lane_visible = False
self.wide_camera = TICI and params.get_bool('EnableWideCamera')
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized,
controller_available,
self.CP.fuzzyFingerprint,
len(self.CP.carFw) > 0)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed and car_recognized and not self.CP.dashcamOnly:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
elif self.joystick_mode:
self.events.add(EventName.joystickDebug, static=True)
self.startup_event = None
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def update_events(self, CS):
"""Compute carEvents from carState"""
self.events.clear()
self.events.add_from_msg(CS.events)
self.events.add_from_msg(self.sm['driverMonitoringState'].events)
# Handle startup event
if self.startup_event is not None:
self.events.add(self.startup_event)
self.startup_event = None
# Don't add any more events if not initialized
if not self.initialized:
self.events.add(EventName.controlsInitializing)
return
# Create events for battery, temperature, disk space, and memory
if EON and self.sm['deviceState'].batteryPercent < 1 and self.sm[
'deviceState'].chargingError:
# at zero percent battery, while discharging, OP should not allowed
self.events.add(EventName.lowBattery)
if self.sm['deviceState'].thermalStatus >= ThermalStatus.red:
self.events.add(EventName.overheat)
if self.sm['deviceState'].freeSpacePercent < 7 and not SIMULATION:
# under 7% of space free no enable allowed
self.events.add(EventName.outOfSpace)
# TODO: make tici threshold the same
if self.sm['deviceState'].memoryUsagePercent > (90 if TICI else
65) and not SIMULATION:
self.events.add(EventName.lowMemory)
cpus = list(
self.sm['deviceState'].cpuUsagePercent)[:(-1 if EON else None)]
if max(cpus, default=0) > 95 and not SIMULATION:
self.events.add(EventName.highCpuUsage)
# Alert if fan isn't spinning for 5 seconds
if self.sm['pandaState'].pandaType in [PandaType.uno, PandaType.dos]:
if self.sm['pandaState'].fanSpeedRpm == 0 and self.sm[
'deviceState'].fanSpeedPercentDesired > 50:
if (self.sm.frame -
self.last_functional_fan_frame) * DT_CTRL > 5.0:
self.events.add(EventName.fanMalfunction)
else:
self.last_functional_fan_frame = self.sm.frame
# Handle calibration status
cal_status = self.sm['liveCalibration'].calStatus
if cal_status != Calibration.CALIBRATED:
if cal_status == Calibration.UNCALIBRATED:
self.events.add(EventName.calibrationIncomplete)
else:
self.events.add(EventName.calibrationInvalid)
# Handle lane change
if self.sm[
'lateralPlan'].laneChangeState == LaneChangeState.preLaneChange:
direction = self.sm['lateralPlan'].laneChangeDirection
if (CS.leftBlindspot and direction == LaneChangeDirection.left) or \
(CS.rightBlindspot and direction == LaneChangeDirection.right):
self.events.add(EventName.laneChangeBlocked)
elif self.sm['lateralPlan'].autoLaneChangeEnabled and self.sm[
'lateralPlan'].autoLaneChangeTimer > 0:
self.events.add(EventName.autoLaneChange)
else:
if direction == LaneChangeDirection.left:
self.events.add(EventName.preLaneChangeLeft)
else:
self.events.add(EventName.preLaneChangeRight)
elif self.sm['lateralPlan'].laneChangeState in [
LaneChangeState.laneChangeStarting,
LaneChangeState.laneChangeFinishing
]:
self.events.add(EventName.laneChange)
if self.can_rcv_error or not CS.canValid:
self.events.add(EventName.canError)
safety_mismatch = self.sm[
'pandaState'].safetyModel != self.CP.safetyModel or self.sm[
'pandaState'].safetyParam != self.CP.safetyParam
if safety_mismatch or self.mismatch_counter >= 200:
self.events.add(EventName.controlsMismatch)
if not self.sm['liveParameters'].valid:
self.events.add(EventName.vehicleModelInvalid)
if len(self.sm['radarState'].radarErrors):
self.events.add(EventName.radarFault)
elif not self.sm.valid["pandaState"]:
self.events.add(EventName.usbError)
elif not self.sm.all_alive_and_valid():
self.events.add(EventName.commIssue)
if not self.logged_comm_issue:
invalid = [
s for s, valid in self.sm.valid.items() if not valid
]
not_alive = [
s for s, alive in self.sm.alive.items() if not alive
]
cloudlog.event("commIssue",
invalid=invalid,
not_alive=not_alive)
self.logged_comm_issue = True
else:
self.logged_comm_issue = False
if not self.sm['lateralPlan'].mpcSolutionValid and not (
EventName.turningIndicatorOn in self.events.names):
self.events.add(EventName.plannerError)
if not self.sm['liveLocationKalman'].sensorsOK and not NOSENSOR:
if self.sm.frame > 5 / DT_CTRL: # Give locationd some time to receive all the inputs
self.events.add(EventName.sensorDataInvalid)
if not self.sm['liveLocationKalman'].posenetOK:
self.events.add(EventName.posenetInvalid)
if not self.sm['liveLocationKalman'].deviceStable:
self.events.add(EventName.deviceFalling)
if log.PandaState.FaultType.relayMalfunction in self.sm[
'pandaState'].faults:
self.events.add(EventName.relayMalfunction)
if self.sm['longitudinalPlan'].fcw or (
self.enabled and self.sm['modelV2'].meta.hardBrakePredicted):
self.events.add(EventName.fcw)
if TICI:
logs = messaging.drain_sock(self.log_sock, wait_for_one=False)
messages = []
for m in logs:
try:
messages.append(m.androidLog.message)
except UnicodeDecodeError:
pass
for err in [
"ERROR_CRC", "ERROR_ECC", "ERROR_STREAM_UNDERFLOW",
"APPLY FAILED"
]:
for m in messages:
if err not in m:
continue
csid = m.split("CSID:")[-1].split(" ")[0]
evt = {
"0": EventName.roadCameraError,
"1": EventName.wideRoadCameraError,
"2": EventName.driverCameraError
}.get(csid, None)
if evt is not None:
self.events.add(evt)
# TODO: fix simulator
if not SIMULATION:
#if not NOSENSOR:
# if not self.sm['liveLocationKalman'].gpsOK and (self.distance_traveled > 1000):
# # Not show in first 1 km to allow for driving out of garage. This event shows after 5 minutes
# self.events.add(EventName.noGps)
if not self.sm.all_alive(self.camera_packets):
self.events.add(EventName.cameraMalfunction)
if self.sm['modelV2'].frameDropPerc > 20:
self.events.add(EventName.modeldLagging)
if self.sm['liveLocationKalman'].excessiveResets:
self.events.add(EventName.localizerMalfunction)
# Check if all manager processes are running
not_running = set(p.name for p in self.sm['managerState'].processes
if not p.running)
if self.sm.rcv_frame['managerState'] and (not_running -
IGNORE_PROCESSES):
self.events.add(EventName.processNotRunning)
# Only allow engagement with brake pressed when stopped behind another stopped car
speeds = self.sm['longitudinalPlan'].speeds
if len(speeds) > 1:
v_future = speeds[-1]
else:
v_future = 100.0
#if CS.brakePressed and v_future >= STARTING_TARGET_SPEED \
# and self.CP.openpilotLongitudinalControl and CS.vEgo < 0.3:
# self.events.add(EventName.noTarget)
def data_sample(self):
"""Receive data from sockets and update carState"""
# Update carState from CAN
can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True)
CS = self.CI.update(self.CC, can_strs)
self.sm.update(0)
all_valid = CS.canValid and self.sm.all_alive_and_valid()
if not self.initialized and (all_valid or self.sm.frame * DT_CTRL > 3.5
or SIMULATION):
self.CI.init(self.CP, self.can_sock, self.pm.sock['sendcan'])
self.initialized = True
Params().put_bool("ControlsReady", True)
# Check for CAN timeout
if not can_strs:
self.can_error_counter += 1
self.can_rcv_error = True
else:
self.can_rcv_error = False
# When the panda and controlsd do not agree on controls_allowed
# we want to disengage openpilot. However the status from the panda goes through
# another socket other than the CAN messages and one can arrive earlier than the other.
# Therefore we allow a mismatch for two samples, then we trigger the disengagement.
if not self.enabled:
self.mismatch_counter = 0
if not self.sm['pandaState'].controlsAllowed and self.enabled:
self.mismatch_counter += 1
self.distance_traveled += CS.vEgo * DT_CTRL
return CS
def state_transition(self, CS):
"""Compute conditional state transitions and execute actions on state transitions"""
self.v_cruise_kph_last = self.v_cruise_kph
# if stock cruise is completely disabled, then we can use our own set speed logic
self.CP.pcmCruise = self.CI.CP.pcmCruise
#if not self.CP.pcmCruise:
# self.v_cruise_kph = update_v_cruise(self.v_cruise_kph, CS.buttonEvents, self.enabled, self.is_metric)
#elif self.CP.pcmCruise and CS.cruiseState.enabled:
# self.v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
SccSmoother.update_cruise_buttons(self, CS,
self.CP.openpilotLongitudinalControl)
# decrease the soft disable timer at every step, as it's reset on
# entrance in SOFT_DISABLING state
self.soft_disable_timer = max(0, self.soft_disable_timer - 1)
self.current_alert_types = [ET.PERMANENT]
# ENABLED, PRE ENABLING, SOFT DISABLING
if self.state != State.disabled:
# user and immediate disable always have priority in a non-disabled state
if self.events.any(ET.USER_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.USER_DISABLE)
elif self.events.any(ET.IMMEDIATE_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.IMMEDIATE_DISABLE)
else:
# ENABLED
if self.state == State.enabled:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = 50 # 0.5s
self.current_alert_types.append(ET.SOFT_DISABLE)
# SOFT DISABLING
elif self.state == State.softDisabling:
if not self.events.any(ET.SOFT_DISABLE):
# no more soft disabling condition, so go back to ENABLED
self.state = State.enabled
elif self.events.any(
ET.SOFT_DISABLE) and self.soft_disable_timer > 0:
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.soft_disable_timer <= 0:
self.state = State.disabled
# PRE ENABLING
elif self.state == State.preEnabled:
if not self.events.any(ET.PRE_ENABLE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.PRE_ENABLE)
# DISABLED
elif self.state == State.disabled:
if self.events.any(ET.ENABLE):
if self.events.any(ET.NO_ENTRY):
self.current_alert_types.append(ET.NO_ENTRY)
else:
if self.events.any(ET.PRE_ENABLE):
self.state = State.preEnabled
else:
self.state = State.enabled
self.current_alert_types.append(ET.ENABLE)
self.v_cruise_kph = initialize_v_cruise(
CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last)
# Check if actuators are enabled
self.active = self.state == State.enabled or self.state == State.softDisabling
if self.active:
self.current_alert_types.append(ET.WARNING)
# Check if openpilot is engaged
self.enabled = self.active or self.state == State.preEnabled
def state_control(self, CS):
"""Given the state, this function returns an actuators packet"""
# Update VehicleModel
params = self.sm['liveParameters']
x = max(params.stiffnessFactor, 0.1)
#sr = max(params.steerRatio, 0.1)
if ntune_common_enabled('useLiveSteerRatio'):
sr = max(params.steerRatio, 0.1)
else:
sr = max(ntune_common_get('steerRatio'), 0.1)
self.VM.update_params(x, sr)
lat_plan = self.sm['lateralPlan']
long_plan = self.sm['longitudinalPlan']
actuators = car.CarControl.Actuators.new_message()
actuators.longControlState = self.LoC.long_control_state
if CS.leftBlinker or CS.rightBlinker:
self.last_blinker_frame = self.sm.frame
# State specific actions
if not self.active:
self.LaC.reset()
self.LoC.reset(v_pid=CS.vEgo)
if not CS.cruiseState.enabledAcc:
self.LoC.reset(v_pid=CS.vEgo)
if not self.joystick_mode:
# accel PID loop
pid_accel_limits = self.CI.get_pid_accel_limits(
self.CP, CS.vEgo, self.v_cruise_kph * CV.KPH_TO_MS)
actuators.accel, self.v_target, self.a_target = self.LoC.update(
self.active and CS.cruiseState.enabledAcc, CS, self.CP,
long_plan, pid_accel_limits)
# Steering PID loop and lateral MPC
desired_curvature, desired_curvature_rate = get_lag_adjusted_curvature(
self.CP, CS.vEgo, lat_plan.psis, lat_plan.curvatures,
lat_plan.curvatureRates)
actuators.steer, actuators.steeringAngleDeg, lac_log = self.LaC.update(
self.active, CS, self.CP, self.VM, params, desired_curvature,
desired_curvature_rate)
else:
lac_log = log.ControlsState.LateralDebugState.new_message()
if self.sm.rcv_frame['testJoystick'] > 0 and self.active:
actuators.accel = 4.0 * clip(self.sm['testJoystick'].axes[0],
-1, 1)
steer = clip(self.sm['testJoystick'].axes[1], -1, 1)
# max angle is 45 for angle-based cars
actuators.steer, actuators.steeringAngleDeg = steer, steer * 45.
lac_log.active = True
lac_log.steeringAngleDeg = CS.steeringAngleDeg
lac_log.output = steer
lac_log.saturated = abs(steer) >= 0.9
# Check for difference between desired angle and angle for angle based control
angle_control_saturated = self.CP.steerControlType == car.CarParams.SteerControlType.angle and \
abs(actuators.steeringAngleDeg - CS.steeringAngleDeg) > STEER_ANGLE_SATURATION_THRESHOLD
if angle_control_saturated and not CS.steeringPressed and self.active:
self.saturated_count += 1
else:
self.saturated_count = 0
# Send a "steering required alert" if saturation count has reached the limit
if (lac_log.saturated and not CS.steeringPressed) or \
(self.saturated_count > STEER_ANGLE_SATURATION_TIMEOUT):
if len(lat_plan.dPathPoints):
# Check if we deviated from the path
left_deviation = actuators.steer > 0 and lat_plan.dPathPoints[
0] < -0.1
right_deviation = actuators.steer < 0 and lat_plan.dPathPoints[
0] > 0.1
if left_deviation or right_deviation:
self.events.add(EventName.steerSaturated)
# Ensure no NaNs/Infs
for p in ACTUATOR_FIELDS:
attr = getattr(actuators, p)
if not isinstance(attr, Number):
continue
if not math.isfinite(attr):
cloudlog.error(
f"actuators.{p} not finite {actuators.to_dict()}")
setattr(actuators, p, 0.0)
return actuators, lac_log
def publish_logs(self, CS, start_time, actuators, lac_log):
"""Send actuators and hud commands to the car, send controlsstate and MPC logging"""
CC = car.CarControl.new_message()
CC.enabled = self.enabled
CC.actuators = actuators
CC.cruiseControl.override = True
CC.cruiseControl.cancel = self.CP.pcmCruise and not self.enabled and CS.cruiseState.enabled
if self.joystick_mode and self.sm.rcv_frame[
'testJoystick'] > 0 and self.sm['testJoystick'].buttons[0]:
CC.cruiseControl.cancel = True
# TODO remove car specific stuff in controls
# Some override values for Honda
# brake discount removes a sharp nonlinearity
brake_discount = (1.0 - clip(-actuators.accel * (3.0 / 4.0), 0.0, 1.0))
speed_override = max(0.0,
(self.LoC.v_pid + CS.cruiseState.speedOffset) *
brake_discount)
CC.cruiseControl.speedOverride = float(
speed_override if self.CP.pcmCruise else 0.0)
CC.cruiseControl.accelOverride = float(
self.CI.calc_accel_override(CS.aEgo, self.a_target, CS.vEgo,
self.v_target))
CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = self.enabled
CC.hudControl.lanesVisible = self.enabled
CC.hudControl.leadVisible = self.sm['longitudinalPlan'].hasLead
right_lane_visible = self.sm['lateralPlan'].rProb > 0.5
left_lane_visible = self.sm['lateralPlan'].lProb > 0.5
if self.sm.frame % 100 == 0:
self.right_lane_visible = right_lane_visible
self.left_lane_visible = left_lane_visible
CC.hudControl.rightLaneVisible = self.right_lane_visible
CC.hudControl.leftLaneVisible = self.left_lane_visible
recent_blinker = (self.sm.frame - self.last_blinker_frame
) * DT_CTRL < 5.0 # 5s blinker cooldown
ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \
and not self.active and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED
meta = self.sm['modelV2'].meta
if len(meta.desirePrediction) and ldw_allowed:
l_lane_change_prob = meta.desirePrediction[Desire.laneChangeLeft -
1]
r_lane_change_prob = meta.desirePrediction[Desire.laneChangeRight -
1]
cameraOffset = ntune_common_get(
"cameraOffset"
) + 0.08 if self.wide_camera else ntune_common_get("cameraOffset")
l_lane_close = left_lane_visible and (
self.sm['modelV2'].laneLines[1].y[0] > -(1.08 + cameraOffset))
r_lane_close = right_lane_visible and (
self.sm['modelV2'].laneLines[2].y[0] < (1.08 - cameraOffset))
CC.hudControl.leftLaneDepart = bool(
l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close)
CC.hudControl.rightLaneDepart = bool(
r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close)
if CC.hudControl.rightLaneDepart or CC.hudControl.leftLaneDepart:
self.events.add(EventName.ldw)
clear_event = ET.WARNING if ET.WARNING not in self.current_alert_types else None
alerts = self.events.create_alerts(self.current_alert_types,
[self.CP, self.sm, self.is_metric])
self.AM.add_many(self.sm.frame, alerts, self.enabled)
self.AM.process_alerts(self.sm.frame, clear_event)
CC.hudControl.visualAlert = self.AM.visual_alert
if not self.read_only and self.initialized:
# send car controls over can
can_sends = self.CI.apply(CC, self)
self.pm.send(
'sendcan',
can_list_to_can_capnp(can_sends,
msgtype='sendcan',
valid=CS.canValid))
force_decel = (self.sm['driverMonitoringState'].awarenessStatus < 0.) or \
(self.state == State.softDisabling)
# Curvature & Steering angle
params = self.sm['liveParameters']
steer_angle_without_offset = math.radians(CS.steeringAngleDeg -
params.angleOffsetAverageDeg)
curvature = -self.VM.calc_curvature(steer_angle_without_offset,
CS.vEgo)
# controlsState
dat = messaging.new_message('controlsState')
dat.valid = CS.canValid
controlsState = dat.controlsState
controlsState.alertText1 = self.AM.alert_text_1
controlsState.alertText2 = self.AM.alert_text_2
controlsState.alertSize = self.AM.alert_size
controlsState.alertStatus = self.AM.alert_status
controlsState.alertBlinkingRate = self.AM.alert_rate
controlsState.alertType = self.AM.alert_type
controlsState.alertSound = self.AM.audible_alert
controlsState.canMonoTimes = list(CS.canMonoTimes)
controlsState.longitudinalPlanMonoTime = self.sm.logMonoTime[
'longitudinalPlan']
controlsState.lateralPlanMonoTime = self.sm.logMonoTime['lateralPlan']
controlsState.enabled = self.enabled
controlsState.active = self.active
controlsState.curvature = curvature
controlsState.state = self.state
controlsState.engageable = not self.events.any(ET.NO_ENTRY)
controlsState.longControlState = self.LoC.long_control_state
controlsState.vPid = float(self.LoC.v_pid)
controlsState.vCruise = float(
self.applyMaxSpeed if self.CP.
openpilotLongitudinalControl else self.v_cruise_kph)
controlsState.upAccelCmd = float(self.LoC.pid.p)
controlsState.uiAccelCmd = float(self.LoC.pid.i)
controlsState.ufAccelCmd = float(self.LoC.pid.f)
controlsState.cumLagMs = -self.rk.remaining * 1000.
controlsState.startMonoTime = int(start_time * 1e9)
controlsState.forceDecel = bool(force_decel)
controlsState.canErrorCounter = self.can_error_counter
controlsState.angleSteers = steer_angle_without_offset * CV.RAD_TO_DEG
controlsState.cluSpeedMs = self.clu_speed_ms
controlsState.applyAccel = self.apply_accel
controlsState.aReqValue = self.aReqValue
controlsState.aReqValueMin = self.aReqValueMin
controlsState.aReqValueMax = self.aReqValueMax
controlsState.sccStockCamAct = self.sccStockCamAct
controlsState.sccStockCamStatus = self.sccStockCamStatus
controlsState.steerRatio = self.VM.sR
controlsState.steerRateCost = ntune_common_get('steerRateCost')
controlsState.steerActuatorDelay = ntune_common_get(
'steerActuatorDelay')
controlsState.sccGasFactor = ntune_scc_get('sccGasFactor')
controlsState.sccBrakeFactor = ntune_scc_get('sccBrakeFactor')
controlsState.sccCurvatureFactor = ntune_scc_get('sccCurvatureFactor')
controlsState.longitudinalActuatorDelay = ntune_scc_get(
'longitudinalActuatorDelay')
if self.joystick_mode:
controlsState.lateralControlState.debugState = lac_log
elif self.CP.steerControlType == car.CarParams.SteerControlType.angle:
controlsState.lateralControlState.angleState = lac_log
elif self.CP.lateralTuning.which() == 'pid':
controlsState.lateralControlState.pidState = lac_log
elif self.CP.lateralTuning.which() == 'lqr':
controlsState.lateralControlState.lqrState = lac_log
elif self.CP.lateralTuning.which() == 'indi':
controlsState.lateralControlState.indiState = lac_log
self.pm.send('controlsState', dat)
# carState
car_events = self.events.to_msg()
cs_send = messaging.new_message('carState')
cs_send.valid = CS.canValid
cs_send.carState = CS
cs_send.carState.events = car_events
self.pm.send('carState', cs_send)
# carEvents - logged every second or on change
if (self.sm.frame % int(1. / DT_CTRL)
== 0) or (self.events.names != self.events_prev):
ce_send = messaging.new_message('carEvents', len(self.events))
ce_send.carEvents = car_events
self.pm.send('carEvents', ce_send)
self.events_prev = self.events.names.copy()
# carParams - logged every 50 seconds (> 1 per segment)
if (self.sm.frame % int(50. / DT_CTRL) == 0):
cp_send = messaging.new_message('carParams')
cp_send.carParams = self.CP
self.pm.send('carParams', cp_send)
# carControl
cc_send = messaging.new_message('carControl')
cc_send.valid = CS.canValid
cc_send.carControl = CC
self.pm.send('carControl', cc_send)
# copy CarControl to pass to CarInterface on the next iteration
self.CC = CC
def step(self):
start_time = sec_since_boot()
self.prof.checkpoint("Ratekeeper", ignore=True)
# Sample data from sockets and get a carState
CS = self.data_sample()
self.prof.checkpoint("Sample")
self.update_events(CS)
if not self.read_only and self.initialized:
# Update control state
self.state_transition(CS)
self.prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, lac_log = self.state_control(CS)
self.prof.checkpoint("State Control")
# Publish data
self.publish_logs(CS, start_time, actuators, lac_log)
self.prof.checkpoint("Sent")
def controlsd_thread(self):
while True:
self.step()
self.rk.monitor_time()
self.prof.display()
def controlsd_thread(gctx=None, rate=100, default_bias=0.):
gc.disable()
# start the loop
set_realtime_priority(3)
context = zmq.Context()
params = Params()
# Pub Sockets
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
livempc = messaging.pub_sock(context, service_list['liveMpc'].port)
is_metric = params.get("IsMetric") == "1"
passive = params.get("Passive") != "0"
# No sendcan if passive
if not passive:
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
else:
sendcan = None
# Sub sockets
poller = zmq.Poller()
thermal = messaging.sub_sock(context,
service_list['thermal'].port,
conflate=True,
poller=poller)
health = messaging.sub_sock(context,
service_list['health'].port,
conflate=True,
poller=poller)
cal = messaging.sub_sock(context,
service_list['liveCalibration'].port,
conflate=True,
poller=poller)
driver_monitor = messaging.sub_sock(context,
service_list['driverMonitoring'].port,
conflate=True,
poller=poller)
gps_location = messaging.sub_sock(context,
service_list['gpsLocationExternal'].port,
conflate=True,
poller=poller)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan, 1.0 if passive else None)
if CI is None:
raise Exception("unsupported car")
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
# Get FCW toggle from settings
fcw_enabled = params.get("IsFcwEnabled") == "1"
geofence = None
PL = Planner(CP, fcw_enabled)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(CP)
AM = AlertManager()
driver_status = DriverStatus()
if not passive:
AM.add("startup", False)
# Write CarParams for radard and boardd safety mode
params.put("CarParams", CP.to_bytes())
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
overtemp = False
free_space = False
cal_status = Calibration.INVALID
cal_perc = 0
mismatch_counter = 0
low_battery = False
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
# Read angle offset from previous drive, fallback to default
angle_offset = default_bias
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
angle_offset = calibration_params["angle_offset2"]
except (ValueError, KeyError):
pass
prof = Profiler(False) # off by default
while True:
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter = data_sample(
CI, CC, thermal, cal, health, driver_monitor, gps_location, poller,
cal_status, cal_perc, overtemp, free_space, low_battery,
driver_status, geofence, state, mismatch_counter, params)
prof.checkpoint("Sample")
# Define longitudinal plan (MPC)
plan, plan_ts = calc_plan(CS, CP, events, PL, LaC, LoC, v_cruise_kph,
driver_status, geofence)
prof.checkpoint("Plan")
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, driver_status, angle_offset = state_control(
plan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM,
rk, driver_status, PL, LaC, LoC, VM, angle_offset, passive,
is_metric, cal_perc)
prof.checkpoint("State Control")
# Publish data
CC = data_send(PL.perception_state, plan, plan_ts, CS, CI, CP, VM,
state, events, actuators, v_cruise_kph, rk, carstate,
carcontrol, live100, livempc, AM, driver_status, LaC,
LoC, angle_offset, passive)
prof.checkpoint("Sent")
rk.keep_time() # Run at 100Hz
prof.display()
def controlsd_thread(gctx, rate=100):
# start the loop
set_realtime_priority(2)
context = zmq.Context()
# pub
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
livempc = messaging.pub_sock(context, service_list['liveMpc'].port)
# sub
thermal = messaging.sub_sock(context, service_list['thermal'].port)
health = messaging.sub_sock(context, service_list['health'].port)
cal = messaging.sub_sock(context, service_list['liveCalibration'].port)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan)
PL = Planner(CP)
LoC = LongControl(CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(VM)
AM = AlertManager()
# write CarParams
params = Params()
params.put("CarParams", CP.to_bytes())
state = State.DISABLED
soft_disable_timer = 0
v_cruise_kph = 255
overtemp = False
free_space = False
cal_status = Calibration.UNCALIBRATED
rear_view_toggle = False
rear_view_allowed = params.get("IsRearViewMirror") == "1"
# 0.0 - 1.0
awareness_status = 0.
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
# learned angle offset
angle_offset = 0.
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
angle_offset = calibration_params["angle_offset"]
except (ValueError, KeyError):
pass
prof = Profiler()
while 1:
prof.reset() # avoid memory leak
# sample data and compute car events
CS, events, cal_status, overtemp, free_space = data_sample(
CI, CC, thermal, health, cal, cal_status, overtemp, free_space)
prof.checkpoint("Sample")
# define plan
plan, plan_ts = calc_plan(CS, events, PL, LoC)
prof.checkpoint("Plan")
# update control state
state, soft_disable_timer, v_cruise_kph = state_transition(
CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# compute actuators
actuators, v_cruise_kph, awareness_status, angle_offset, rear_view_toggle = state_control(
plan, CS, CP, state, events, v_cruise_kph, AM, rk,
awareness_status, PL, LaC, LoC, VM, angle_offset,
rear_view_allowed, rear_view_toggle)
prof.checkpoint("State Control")
# publish data
CC = data_send(plan, plan_ts, CS, CI, CP, state, events, actuators,
v_cruise_kph, rk, carstate, carcontrol, live100,
livempc, AM, rear_view_allowed, rear_view_toggle,
awareness_status, LaC, LoC, angle_offset)
prof.checkpoint("Sent")
# *** run loop at fixed rate ***
if rk.keep_time():
prof.display()
def controlsd_thread(gctx, rate=100): #rate in Hz
# *** log ***
context = zmq.Context()
live100 = messaging.pub_sock(context, service_list['live100'].port)
thermal = messaging.sub_sock(context, service_list['thermal'].port)
live20 = messaging.sub_sock(context, service_list['live20'].port)
model = messaging.sub_sock(context, service_list['model'].port)
health = messaging.sub_sock(context, service_list['health'].port)
# connects to can and sendcan
CI = CarInterface()
VP = CI.getVehicleParams()
PP = PathPlanner(model)
AC = AdaptiveCruise(live20)
AM = AlertManager()
LoC = LongControl()
LaC = LatControl()
# controls enabled state
enabled = False
last_enable_request = 0
# learned angle offset
angle_offset = 0
# rear view camera state
rear_view_toggle = False
v_cruise_kph = 255
# 0.0 - 1.0
awareness_status = 0.0
soft_disable_timer = None
# Is cpu temp too high to enable?
overtemp = False
free_space = 1.0
# start the loop
set_realtime_priority(2)
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
while 1:
prof = Profiler()
cur_time = sec_since_boot()
# read CAN
CS = CI.update()
prof.checkpoint("CarInterface")
# did it request to enable?
enable_request, enable_condition = False, False
if enabled:
# gives the user 6 minutes
awareness_status -= 1.0 / (100 * 60 * 6)
if awareness_status <= 0.:
AM.add("driverDistracted", enabled)
# reset awareness status on steering
if CS.steeringPressed:
awareness_status = 1.0
# handle button presses
for b in CS.buttonEvents:
print b
# reset awareness on any user action
awareness_status = 1.0
# button presses for rear view
if b.type == "leftBlinker" or b.type == "rightBlinker":
if b.pressed:
rear_view_toggle = True
else:
rear_view_toggle = False
if b.type == "altButton1" and b.pressed:
rear_view_toggle = not rear_view_toggle
if not VP.brake_only and enabled and not b.pressed:
if b.type == "accelCruise":
v_cruise_kph = v_cruise_kph - (
v_cruise_kph % V_CRUISE_DELTA) + V_CRUISE_DELTA
elif b.type == "decelCruise":
v_cruise_kph = v_cruise_kph - (
v_cruise_kph % V_CRUISE_DELTA) - V_CRUISE_DELTA
v_cruise_kph = clip(v_cruise_kph, V_CRUISE_MIN, V_CRUISE_MAX)
if not enabled and b.type in ["accelCruise", "decelCruise"
] and not b.pressed:
enable_request = True
# do disable on button down
if b.type == "cancel" and b.pressed:
AM.add("disable", enabled)
prof.checkpoint("Buttons")
# *** health checking logic ***
hh = messaging.recv_sock(health)
if hh is not None:
# if the board isn't allowing controls but somehow we are enabled!
if not hh.health.controlsAllowed and enabled:
AM.add("controlsMismatch", enabled)
# *** thermal checking logic ***
# thermal data, checked every second
td = messaging.recv_sock(thermal)
if td is not None:
# Check temperature.
overtemp = any(t > 950 for t in (td.thermal.cpu0, td.thermal.cpu1,
td.thermal.cpu2, td.thermal.cpu3,
td.thermal.mem, td.thermal.gpu))
# under 15% of space free
free_space = td.thermal.freeSpace
prof.checkpoint("Health")
# *** getting model logic ***
PP.update(cur_time, CS.vEgo)
if rk.frame % 5 == 2:
# *** run this at 20hz again ***
angle_offset = learn_angle_offset(enabled, CS.vEgo, angle_offset,
np.asarray(PP.d_poly), LaC.y_des,
CS.steeringPressed)
# disable if the pedals are pressed while engaged, this is a user disable
if enabled:
if CS.gasPressed or CS.brakePressed:
AM.add("disable", enabled)
if enable_request:
# check for pressed pedals
if CS.gasPressed or CS.brakePressed:
AM.add("pedalPressed", enabled)
enable_request = False
else:
print "enabled pressed at", cur_time
last_enable_request = cur_time
# don't engage with less than 15% free
if free_space < 0.15:
AM.add("outOfSpace", enabled)
enable_request = False
if VP.brake_only:
enable_condition = ((cur_time - last_enable_request) <
0.2) and CS.cruiseState.enabled
else:
enable_condition = enable_request
if enable_request or enable_condition or enabled:
# add all alerts from car
for alert in CS.errors:
AM.add(alert, enabled)
if AC.dead:
AM.add("radarCommIssue", enabled)
if PP.dead:
AM.add("modelCommIssue", enabled)
if overtemp:
AM.add("overheat", enabled)
prof.checkpoint("Model")
if enable_condition and not enabled and not AM.alertPresent():
print "*** enabling controls"
# beep for enabling
AM.add("enable", enabled)
# enable both lateral and longitudinal controls
enabled = True
# on activation, let's always set v_cruise from where we are, even if PCM ACC is active
v_cruise_kph = int(
round(
max(CS.vEgo * CV.MS_TO_KPH * VP.ui_speed_fudge,
V_CRUISE_ENABLE_MIN)))
# 6 minutes driver you're on
awareness_status = 1.0
# reset the PID loops
LaC.reset()
# start long control at actual speed
LoC.reset(v_pid=CS.vEgo)
if VP.brake_only and CS.cruiseState.enabled:
v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
# *** put the adaptive in adaptive cruise control ***
AC.update(cur_time, CS.vEgo, CS.steeringAngle, LoC.v_pid,
awareness_status, VP)
prof.checkpoint("AdaptiveCruise")
# *** gas/brake PID loop ***
final_gas, final_brake = LoC.update(enabled, CS.vEgo, v_cruise_kph,
AC.v_target_lead, AC.a_target,
AC.jerk_factor, VP)
# *** steering PID loop ***
final_steer, sat_flag = LaC.update(enabled, CS.vEgo, CS.steeringAngle,
CS.steeringPressed, PP.d_poly,
angle_offset, VP)
prof.checkpoint("PID")
# ***** handle alerts ****
# send a "steering required alert" if saturation count has reached the limit
if sat_flag:
AM.add("steerSaturated", enabled)
if enabled and AM.alertShouldDisable():
print "DISABLING IMMEDIATELY ON ALERT"
enabled = False
if enabled and AM.alertShouldSoftDisable():
if soft_disable_timer is None:
soft_disable_timer = 3 * rate
elif soft_disable_timer == 0:
print "SOFT DISABLING ON ALERT"
enabled = False
else:
soft_disable_timer -= 1
else:
soft_disable_timer = None
# *** push the alerts to current ***
alert_text_1, alert_text_2, visual_alert, audible_alert = AM.process_alerts(
cur_time)
# ***** control the car *****
CC = car.CarControl.new_message()
CC.enabled = enabled
CC.gas = float(final_gas)
CC.brake = float(final_brake)
CC.steeringTorque = float(final_steer)
CC.cruiseControl.override = True
CC.cruiseControl.cancel = bool(
(not VP.brake_only)
or (not enabled and CS.cruiseState.enabled
)) # always cancel if we have an interceptor
CC.cruiseControl.speedOverride = float((LoC.v_pid - .3) if (
VP.brake_only and final_brake == 0.) else 0.0)
CC.cruiseControl.accelOverride = float(AC.a_pcm)
CC.hudControl.setSpeed = float(v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = enabled
CC.hudControl.lanesVisible = enabled
CC.hudControl.leadVisible = bool(AC.has_lead)
CC.hudControl.visualAlert = visual_alert
CC.hudControl.audibleAlert = audible_alert
# this alert will apply next controls cycle
if not CI.apply(CC):
AM.add("controlsFailed", enabled)
prof.checkpoint("CarControl")
# ***** publish state to logger *****
# publish controls state at 100Hz
dat = messaging.new_message()
dat.init('live100')
# show rear view camera on phone if in reverse gear or when button is pressed
dat.live100.rearViewCam = ('reverseGear'
in CS.errors) or rear_view_toggle
dat.live100.alertText1 = alert_text_1
dat.live100.alertText2 = alert_text_2
dat.live100.awarenessStatus = max(awareness_status,
0.0) if enabled else 0.0
# what packets were used to process
dat.live100.canMonoTimes = list(CS.canMonoTimes)
dat.live100.mdMonoTime = PP.logMonoTime
dat.live100.l20MonoTime = AC.logMonoTime
# if controls is enabled
dat.live100.enabled = enabled
# car state
dat.live100.vEgo = CS.vEgo
dat.live100.angleSteers = CS.steeringAngle
dat.live100.steerOverride = CS.steeringPressed
# longitudinal control state
dat.live100.vPid = float(LoC.v_pid)
dat.live100.vCruise = float(v_cruise_kph)
dat.live100.upAccelCmd = float(LoC.Up_accel_cmd)
dat.live100.uiAccelCmd = float(LoC.Ui_accel_cmd)
# lateral control state
dat.live100.yActual = float(LaC.y_actual)
dat.live100.yDes = float(LaC.y_des)
dat.live100.upSteer = float(LaC.Up_steer)
dat.live100.uiSteer = float(LaC.Ui_steer)
# processed radar state, should add a_pcm?
dat.live100.vTargetLead = float(AC.v_target_lead)
dat.live100.aTargetMin = float(AC.a_target[0])
dat.live100.aTargetMax = float(AC.a_target[1])
dat.live100.jerkFactor = float(AC.jerk_factor)
# lag
dat.live100.cumLagMs = -rk.remaining * 1000.
live100.send(dat.to_bytes())
prof.checkpoint("Live100")
# *** run loop at fixed rate ***
if rk.keep_time():
prof.display()
