def __init__(self, gctx, rate=100):
self.rate = rate
# *** log ***
context = zmq.Context()
# pub
self.live100 = messaging.pub_sock(context, service_list['live100'].port)
self.carstate = messaging.pub_sock(context, service_list['carState'].port)
self.carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
# sub
self.thermal = messaging.sub_sock(context, service_list['thermal'].port)
self.health = messaging.sub_sock(context, service_list['health'].port)
logcan = messaging.sub_sock(context, service_list['can'].port)
self.cal = messaging.sub_sock(context, service_list['liveCalibration'].port)
self.CC = car.CarControl.new_message()
self.CI, self.CP = get_car(logcan, sendcan)
self.PL = Planner(self.CP)
self.AM = AlertManager()
self.LoC = LongControl()
self.LaC = LatControl()
# write CarParams
params = Params()
params.put("CarParams", self.CP.to_bytes())
# fake plan
self.plan_ts = 0
self.plan = log.Plan.new_message()
self.plan.lateralValid = False
self.plan.longitudinalValid = False
# controls enabled state
self.enabled = False
self.last_enable_request = 0
# learned angle offset
self.angle_offset = 0
# rear view camera state
self.rear_view_toggle = False
self.rear_view_allowed = bool(params.get("IsRearViewMirror"))
self.v_cruise_kph = 255
# 0.0 - 1.0
self.awareness_status = 1.0
self.soft_disable_timer = None
self.overtemp = False
self.free_space = 1.0
self.cal_status = Calibration.UNCALIBRATED
self.cal_perc = 0
self.rk = Ratekeeper(self.rate, print_delay_threshold=2./1000)
def controlsd_thread(gctx, rate=100):
# start the loop
set_realtime_priority(2)
context = zmq.Context()
params = Params()
# pub
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
livempc = messaging.pub_sock(context, service_list['liveMpc'].port)
passive = params.get("Passive") != "0"
if not passive:
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
else:
sendcan = None
# sub
thermal = messaging.sub_sock(context, service_list['thermal'].port)
health = messaging.sub_sock(context, service_list['health'].port)
cal = messaging.sub_sock(context, service_list['liveCalibration'].port)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan, 1.0 if passive else None)
if CI is None:
if passive:
return
else:
raise Exception("unsupported car")
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
fcw_enabled = params.get("IsFcwEnabled") == "1"
PL = Planner(CP, fcw_enabled)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(VM)
AM = AlertManager()
if not passive:
AM.add("startup", False)
# write CarParams
params.put("CarParams", CP.to_bytes())
state = State.DISABLED
soft_disable_timer = 0
v_cruise_kph = 255
overtemp = False
free_space = False
cal_status = Calibration.UNCALIBRATED
rear_view_toggle = False
rear_view_allowed = params.get("IsRearViewMirror") == "1"
# 0.0 - 1.0
awareness_status = 1.
rk = Ratekeeper(rate, print_delay_threshold=2./1000)
# learned angle offset
angle_offset = 1.5 # Default model bias
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
angle_offset = calibration_params["angle_offset"]
except (ValueError, KeyError):
pass
prof = Profiler()
while 1:
prof.reset() # avoid memory leak
# sample data and compute car events
CS, events, cal_status, overtemp, free_space = data_sample(CI, CC, thermal, health, cal, cal_status,
overtemp, free_space)
prof.checkpoint("Sample")
# define plan
plan, plan_ts = calc_plan(CS, events, PL, LoC, v_cruise_kph, awareness_status)
prof.checkpoint("Plan")
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph = state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# compute actuators
actuators, v_cruise_kph, awareness_status, angle_offset, rear_view_toggle = state_control(plan, CS, CP, state, events, v_cruise_kph,
AM, rk, awareness_status, PL, LaC, LoC, VM, angle_offset,
rear_view_allowed, rear_view_toggle)
prof.checkpoint("State Control")
# publish data
CC = data_send(plan, plan_ts, CS, CI, CP, state, events, actuators, v_cruise_kph,
rk, carstate, carcontrol, live100, livempc, AM, rear_view_allowed,
rear_view_toggle, awareness_status, LaC, LoC, angle_offset, passive)
prof.checkpoint("Sent")
# *** run loop at fixed rate ***
if rk.keep_time():
prof.display()
def controlsd_thread(gctx=None, rate=100):
gc.disable()
# start the loop
set_realtime_priority(3)
context = zmq.Context()
params = Params()
# Pub Sockets
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
is_metric = params.get("IsMetric") == "1"
passive = params.get("Passive") != "0"
# No sendcan if passive
if not passive:
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
else:
sendcan = None
# Sub sockets
poller = zmq.Poller()
thermal = messaging.sub_sock(context,
service_list['thermal'].port,
conflate=True,
poller=poller)
health = messaging.sub_sock(context,
service_list['health'].port,
conflate=True,
poller=poller)
cal = messaging.sub_sock(context,
service_list['liveCalibration'].port,
conflate=True,
poller=poller)
driver_monitor = messaging.sub_sock(context,
service_list['driverMonitoring'].port,
conflate=True,
poller=poller)
plan_sock = messaging.sub_sock(context,
service_list['plan'].port,
conflate=True,
poller=poller)
path_plan_sock = messaging.sub_sock(context,
service_list['pathPlan'].port,
conflate=True,
poller=poller)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan, 1.0 if passive else None)
if CI is None:
raise Exception("unsupported car")
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(CP)
AM = AlertManager()
driver_status = DriverStatus()
if not passive:
AM.add("startup", False)
# Write CarParams for radard and boardd safety mode
params.put("CarParams", CP.to_bytes())
params.put("LongitudinalControl",
"1" if CP.openpilotLongitudinalControl else "0")
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
overtemp = False
free_space = False
cal_status = Calibration.INVALID
cal_perc = 0
mismatch_counter = 0
low_battery = False
plan = messaging.new_message()
plan.init('plan')
path_plan = messaging.new_message()
path_plan.init('pathPlan')
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
controls_params = params.get("ControlsParams")
# Read angle offset from previous drive
if controls_params is not None:
controls_params = json.loads(controls_params)
angle_offset = controls_params['angle_offset']
else:
angle_offset = 0.
prof = Profiler(False) # off by default
while True:
start_time = int(sec_since_boot() * 1e9)
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter, plan, path_plan =\
data_sample(CI, CC, plan_sock, path_plan_sock, thermal, cal, health, driver_monitor,
poller, cal_status, cal_perc, overtemp, free_space, low_battery, driver_status,
state, mismatch_counter, params, plan, path_plan)
prof.checkpoint("Sample")
path_plan_age = (start_time - path_plan.logMonoTime) / 1e9
plan_age = (start_time - plan.logMonoTime) / 1e9
if not path_plan.pathPlan.valid or plan_age > 0.5 or path_plan_age > 0.5:
events.append(
create_event('plannerError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
events += list(plan.plan.events)
# Only allow engagement with brake pressed when stopped behind another stopped car
if CS.brakePressed and plan.plan.vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
events.append(
create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, driver_status, angle_offset, v_acc, a_acc = \
state_control(plan.plan, path_plan.pathPlan, CS, CP, state, events, v_cruise_kph,
v_cruise_kph_last, AM, rk, driver_status,
LaC, LoC, VM, angle_offset, passive, is_metric, cal_perc)
prof.checkpoint("State Control")
# Publish data
CC = data_send(plan, path_plan, CS, CI, CP, VM, state, events,
actuators, v_cruise_kph, rk, carstate, carcontrol,
live100, AM, driver_status, LaC, LoC, angle_offset,
passive, start_time, params, v_acc, a_acc)
prof.checkpoint("Sent")
rk.keep_time() # Run at 100Hz
prof.display()
def controlsd_thread(gctx=None, rate=100, default_bias=0.):
gc.disable()
# start the loop
set_realtime_priority(3)
context = zmq.Context()
params = Params()
# pub
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
livempc = messaging.pub_sock(context, service_list['liveMpc'].port)
is_metric = params.get("IsMetric") == "1"
passive = params.get("Passive") != "0"
if not passive:
while 1:
try:
sendcan = messaging.pub_sock(context,
service_list['sendcan'].port)
break
except zmq.error.ZMQError:
kill_defaultd()
else:
sendcan = None
# sub
poller = zmq.Poller()
thermal = messaging.sub_sock(context,
service_list['thermal'].port,
conflate=True,
poller=poller)
health = messaging.sub_sock(context,
service_list['health'].port,
conflate=True,
poller=poller)
cal = messaging.sub_sock(context,
service_list['liveCalibration'].port,
conflate=True,
poller=poller)
driver_monitor = messaging.sub_sock(context,
service_list['driverMonitoring'].port,
conflate=True,
poller=poller)
gps_location = messaging.sub_sock(context,
service_list['gpsLocationExternal'].port,
conflate=True,
poller=poller)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan, 1.0 if passive else None)
if CI is None:
raise Exception("unsupported car")
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
fcw_enabled = params.get("IsFcwEnabled") == "1"
geofence = None
PL = Planner(CP, fcw_enabled)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(VM)
AM = AlertManager()
driver_status = DriverStatus()
if not passive:
AM.add("startup", False)
# write CarParams
params.put("CarParams", CP.to_bytes())
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
overtemp = False
free_space = False
cal_status = Calibration.INVALID
cal_perc = 0
mismatch_counter = 0
low_battery = False
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
# learned angle offset
angle_offset = default_bias
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
angle_offset = calibration_params["angle_offset2"]
except (ValueError, KeyError):
pass
prof = Profiler(False) # off by default
while 1:
prof.checkpoint("Ratekeeper", ignore=True)
# sample data and compute car events
CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter = data_sample(
CI, CC, thermal, cal, health, driver_monitor, gps_location, poller,
cal_status, cal_perc, overtemp, free_space, low_battery,
driver_status, geofence, state, mismatch_counter, params)
prof.checkpoint("Sample")
# define plan
plan, plan_ts = calc_plan(CS, CP, events, PL, LaC, LoC, v_cruise_kph,
driver_status, geofence)
prof.checkpoint("Plan")
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# compute actuators
actuators, v_cruise_kph, driver_status, angle_offset = state_control(
plan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM,
rk, driver_status, PL, LaC, LoC, VM, angle_offset, passive,
is_metric, cal_perc)
prof.checkpoint("State Control")
# publish data
CC = data_send(PL.perception_state, plan, plan_ts, CS, CI, CP, VM,
state, events, actuators, v_cruise_kph, rk, carstate,
carcontrol, live100, livempc, AM, driver_status, LaC,
LoC, angle_offset, passive)
prof.checkpoint("Sent")
# *** run loop at fixed rate ***
rk.keep_time()
prof.display()
def controlsd_thread(gctx=None, rate=100):
gc.disable()
# start the loop
set_realtime_priority(3)
##### AS
context = zmq.Context()
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
carla_socket = context.socket(zmq.PAIR)
carla_socket.bind("tcp://*:5560")
is_metric = True
passive = True
##### AS
# No sendcan if passive
if not passive:
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
else:
sendcan = None
# Sub sockets
poller = zmq.Poller()
#thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller)
#health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller)
cal = messaging.sub_sock(context,
service_list['liveCalibration'].port,
conflate=True,
poller=poller)
#driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller)
plan_sock = messaging.sub_sock(context,
service_list['plan'].port,
conflate=True,
poller=poller)
path_plan_sock = messaging.sub_sock(context,
service_list['pathPlan'].port,
conflate=True,
poller=poller)
#logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CP = ToyotaInterface.get_params("TOYOTA PRIUS 2017", {})
CP.steerRatio = 1.0
CI = ToyotaInterface(CP, sendcan)
if CI is None:
raise Exception("unsupported car")
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(CP)
AM = AlertManager()
if not passive:
AM.add("startup", False)
state = State.enabled
soft_disable_timer = 0
v_cruise_kph = 50 ##### !!! change
v_cruise_kph_last = 0 ##### !! change
cal_status = Calibration.CALIBRATED
cal_perc = 0
plan = messaging.new_message()
plan.init('plan')
path_plan = messaging.new_message()
path_plan.init('pathPlan')
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
angle_offset = 0.
prof = Profiler(False) # off by default
startup = True ##### AS
while True:
start_time = int(sec_since_boot() * 1e9)
prof.checkpoint("Ratekeeper", ignore=True)
if cal_status != Calibration.CALIBRATED:
assert (1 == 0), 'Got uncalibrated for some reason'
stuff = recv_array(carla_socket)
current_vel = float(stuff[0])
current_steer = float(stuff[1])
v_cruise_kph = float(stuff[2])
updateInternalCS(CI.CS, current_vel, current_steer, 0, v_cruise_kph)
CS = returnNewCS(CI)
events = list(CS.events)
##### AS since we dont do preenabled state
if startup:
LaC.reset()
LoC.reset(v_pid=CS.vEgo)
v_acc = 0
a_acc = 0
AM.process_alerts(0.0)
startup = False
ASsend_live100_CS(plan, path_plan, CS, VM, state, events, v_cruise_kph,
AM, LaC, LoC, angle_offset, v_acc, a_acc, rk,
start_time, live100, carstate)
cal_status, cal_perc, plan, path_plan =\
ASdata_sample(plan_sock, path_plan_sock, cal, poller, cal_status, cal_perc, state, plan, path_plan)
prof.checkpoint("Sample")
path_plan_age = (start_time - path_plan.logMonoTime) / 1e9
plan_age = (start_time - plan.logMonoTime) / 1e9
if not path_plan.pathPlan.valid or plan_age > 0.5 or path_plan_age > 0.5:
print 'planner time too long or invalid'
#events.append(create_event('plannerError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
events += list(plan.plan.events)
# Only allow engagement with brake pressed when stopped behind another stopped car
#if CS.brakePressed and plan.plan.vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
# events.append(create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
v_acc, a_acc = \
ASstate_control(plan.plan, path_plan.pathPlan, CS, CP, state, events, v_cruise_kph,
v_cruise_kph_last, AM, rk,
LaC, LoC, VM, angle_offset, passive, is_metric, cal_perc)
prof.checkpoint("State Control")
# Publish data
yawrate = VM.yaw_rate(math.radians(path_plan.pathPlan.angleSteers),
v_acc)
beta = (VM.aR + VM.aF * VM.chi -
VM.m * v_acc**2 / VM.cF / VM.cR / VM.l *
(VM.cF * VM.aF - VM.cR * VM.aR * VM.chi))
beta *= yawrate / (1 - VM.chi) / v_acc
send_array(
carla_socket,
np.array([
v_acc, path_plan.pathPlan.angleSteers,
-3.3 * math.degrees(yawrate), -3.3 * math.degrees(beta)
]))
prof.checkpoint("Sent")
rk.monitor_time() # Run at 100Hz, no 20 Hz
prof.display()
def controlsd_thread(gctx, rate=100): #rate in Hz
# *** log ***
context = zmq.Context()
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
thermal = messaging.sub_sock(context, service_list['thermal'].port)
live20 = messaging.sub_sock(context, service_list['live20'].port)
model = messaging.sub_sock(context, service_list['model'].port)
health = messaging.sub_sock(context, service_list['health'].port)
logcan = messaging.sub_sock(context, service_list['can'].port)
# connects to can and sendcan
CI = CarInterface()
VP = CI.getVehicleParams()
PP = PathPlanner(model)
AC = AdaptiveCruise(live20)
AM = AlertManager()
LoC = LongControl()
LaC = LatControl()
# controls enabled state
enabled = False
last_enable_request = 0
# learned angle offset
angle_offset = 0
# rear view camera state
rear_view_toggle = False
v_cruise_kph = 255
# 0.0 - 1.0
awareness_status = 0.0
soft_disable_timer = None
# Is cpu temp too high to enable?
overtemp = False
free_space = 1.0
# start the loop
set_realtime_priority(2)
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
while 1:
prof = Profiler()
cur_time = sec_since_boot()
# read CAN
# CS = CI.update()
CS = car.CarState.new_message()
CS.vEgo = 13
for a in messaging.drain_sock(logcan):
CS.steeringAngle = a.carState.steeringAngle
# broadcast carState
cs_send = messaging.new_message()
cs_send.init('carState')
cs_send.carState = CS # copy?
carstate.send(cs_send.to_bytes())
prof.checkpoint("CarInterface")
# did it request to enable?
enable_request, enable_condition = False, False
if enabled:
# gives the user 6 minutes
# awareness_status -= 1.0/(100*60*6)
if awareness_status <= 0.:
# AM.add("driverDistracted", enabled)
awareness_status = 1.0
# reset awareness status on steering
if CS.steeringPressed:
awareness_status = 1.0
# handle button presses
for b in CS.buttonEvents:
print b
# reset awareness on any user action
awareness_status = 1.0
# button presses for rear view
if b.type == "leftBlinker" or b.type == "rightBlinker":
if b.pressed:
rear_view_toggle = True
else:
rear_view_toggle = False
if b.type == "altButton1" and b.pressed:
rear_view_toggle = not rear_view_toggle
if not VP.brake_only and enabled and not b.pressed:
if b.type == "accelCruise":
v_cruise_kph = v_cruise_kph - (
v_cruise_kph % V_CRUISE_DELTA) + V_CRUISE_DELTA
elif b.type == "decelCruise":
v_cruise_kph = v_cruise_kph - (
v_cruise_kph % V_CRUISE_DELTA) - V_CRUISE_DELTA
v_cruise_kph = clip(v_cruise_kph, V_CRUISE_MIN, V_CRUISE_MAX)
if not enabled and b.type in ["accelCruise", "decelCruise"
] and not b.pressed:
enable_request = True
# do disable on button down
if b.type == "cancel" and b.pressed:
AM.add("disable", enabled)
# Hack-hack
if not enabled:
enable_request = True
prof.checkpoint("Buttons")
# *** health checking logic ***
hh = messaging.recv_sock(health)
if hh is not None:
# if the board isn't allowing controls but somehow we are enabled!
if not hh.health.controlsAllowed and enabled:
AM.add("controlsMismatch", enabled)
# *** thermal checking logic ***
# thermal data, checked every second
td = messaging.recv_sock(thermal)
if False and td is not None:
# Check temperature.
overtemp = any(t > 950 for t in (td.thermal.cpu0, td.thermal.cpu1,
td.thermal.cpu2, td.thermal.cpu3,
td.thermal.mem, td.thermal.gpu))
# under 15% of space free
free_space = td.thermal.freeSpace
prof.checkpoint("Health")
# *** getting model logic ***
PP.update(cur_time, CS.vEgo)
if rk.frame % 5 == 2:
# *** run this at 20hz again ***
angle_offset = learn_angle_offset(enabled, CS.vEgo, angle_offset,
np.asarray(PP.d_poly), LaC.y_des,
CS.steeringPressed)
# disable if the pedals are pressed while engaged, this is a user disable
if enabled:
if CS.gasPressed or CS.brakePressed:
AM.add("disable", enabled)
if enable_request:
# check for pressed pedals
if CS.gasPressed or CS.brakePressed:
AM.add("pedalPressed", enabled)
enable_request = False
else:
print "enabled pressed at", cur_time
last_enable_request = cur_time
# don't engage with less than 15% free
if free_space < 0.15:
AM.add("outOfSpace", enabled)
enable_request = False
if VP.brake_only:
enable_condition = ((cur_time - last_enable_request) <
0.2) and CS.cruiseState.enabled
else:
enable_condition = enable_request
if enable_request or enable_condition or enabled:
# add all alerts from car
for alert in CS.errors:
AM.add(alert, enabled)
if False and AC.dead:
AM.add("radarCommIssue", enabled)
if PP.dead:
AM.add("modelCommIssue", enabled)
if overtemp:
AM.add("overheat", enabled)
prof.checkpoint("Model")
if enable_condition and not enabled and not AM.alertPresent():
print "*** enabling controls"
# beep for enabling
AM.add("enable", enabled)
# enable both lateral and longitudinal controls
enabled = True
# on activation, let's always set v_cruise from where we are, even if PCM ACC is active
v_cruise_kph = int(
round(
max(CS.vEgo * CV.MS_TO_KPH * VP.ui_speed_fudge,
V_CRUISE_ENABLE_MIN)))
# 6 minutes driver you're on
awareness_status = 1.0
# reset the PID loops
LaC.reset()
# start long control at actual speed
LoC.reset(v_pid=CS.vEgo)
if VP.brake_only and CS.cruiseState.enabled:
v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
# *** put the adaptive in adaptive cruise control ***
AC.update(cur_time, CS.vEgo, CS.steeringAngle, LoC.v_pid,
awareness_status, VP)
prof.checkpoint("AdaptiveCruise")
# *** gas/brake PID loop ***
final_gas, final_brake = LoC.update(enabled, CS.vEgo, v_cruise_kph,
AC.v_target_lead, AC.a_target,
AC.jerk_factor, VP)
# *** steering PID loop ***
final_steer, sat_flag = LaC.update(enabled, CS.vEgo, CS.steeringAngle,
CS.steeringPressed, PP.d_poly,
angle_offset, VP)
prof.checkpoint("PID")
# ***** handle alerts ****
# send a "steering required alert" if saturation count has reached the limit
if False and sat_flag:
AM.add("steerSaturated", enabled)
if enabled and AM.alertShouldDisable():
print "DISABLING IMMEDIATELY ON ALERT"
enabled = False
if enabled and AM.alertShouldSoftDisable():
if soft_disable_timer is None:
soft_disable_timer = 3 * rate
elif soft_disable_timer == 0:
print "SOFT DISABLING ON ALERT"
enabled = False
else:
soft_disable_timer -= 1
else:
soft_disable_timer = None
# *** push the alerts to current ***
alert_text_1, alert_text_2, visual_alert, audible_alert = AM.process_alerts(
cur_time)
# ***** control the car *****
CC = car.CarControl.new_message()
CC.enabled = enabled
CC.gas = float(final_gas)
CC.brake = float(final_brake)
CC.steeringTorque = float(final_steer)
CC.cruiseControl.override = True
CC.cruiseControl.cancel = bool(
(not VP.brake_only)
or (not enabled and CS.cruiseState.enabled
)) # always cancel if we have an interceptor
CC.cruiseControl.speedOverride = float((LoC.v_pid - .3) if (
VP.brake_only and final_brake == 0.) else 0.0)
CC.cruiseControl.accelOverride = float(AC.a_pcm)
CC.hudControl.setSpeed = float(v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = enabled
CC.hudControl.lanesVisible = enabled
CC.hudControl.leadVisible = bool(AC.has_lead)
CC.hudControl.visualAlert = visual_alert
CC.hudControl.audibleAlert = audible_alert
# this alert will apply next controls cycle
#if not CI.apply(CC):
# AM.add("controlsFailed", enabled)
# broadcast carControl
cc_send = messaging.new_message()
cc_send.init('carControl')
cc_send.carControl = CC # copy?
#carcontrol.send(cc_send.to_bytes())
sendcan.send(cc_send.to_bytes())
prof.checkpoint("CarControl")
# ***** publish state to logger *****
# publish controls state at 100Hz
dat = messaging.new_message()
dat.init('live100')
# show rear view camera on phone if in reverse gear or when button is pressed
dat.live100.rearViewCam = ('reverseGear'
in CS.errors) or rear_view_toggle
dat.live100.alertText1 = alert_text_1
dat.live100.alertText2 = alert_text_2
dat.live100.awarenessStatus = max(awareness_status,
0.0) if enabled else 0.0
# what packets were used to process
dat.live100.canMonoTimes = list(CS.canMonoTimes)
dat.live100.mdMonoTime = PP.logMonoTime
dat.live100.l20MonoTime = AC.logMonoTime
# if controls is enabled
dat.live100.enabled = enabled
# car state
dat.live100.vEgo = CS.vEgo
dat.live100.angleSteers = CS.steeringAngle
dat.live100.steerOverride = CS.steeringPressed
# longitudinal control state
dat.live100.vPid = float(LoC.v_pid)
dat.live100.vCruise = float(v_cruise_kph)
dat.live100.upAccelCmd = float(LoC.Up_accel_cmd)
dat.live100.uiAccelCmd = float(LoC.Ui_accel_cmd)
# lateral control state
dat.live100.yActual = float(LaC.y_actual)
dat.live100.yDes = float(LaC.y_des)
dat.live100.upSteer = float(LaC.Up_steer)
dat.live100.uiSteer = float(LaC.Ui_steer)
# processed radar state, should add a_pcm?
dat.live100.vTargetLead = float(AC.v_target_lead)
dat.live100.aTargetMin = float(AC.a_target[0])
dat.live100.aTargetMax = float(AC.a_target[1])
dat.live100.jerkFactor = float(AC.jerk_factor)
# lag
dat.live100.cumLagMs = -rk.remaining * 1000.
live100.send(dat.to_bytes())
prof.checkpoint("Live100")
# *** run loop at fixed rate ***
if rk.keep_time():
prof.display()
def controlsd_thread(gctx, rate=100): #rate in Hz
# *** log ***
context = zmq.Context()
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
thermal = messaging.sub_sock(context, service_list['thermal'].port)
health = messaging.sub_sock(context, service_list['health'].port)
plan_sock = messaging.sub_sock(context, service_list['plan'].port)
logcan = messaging.sub_sock(context, service_list['can'].port)
# connects to can
CP = fingerprint(logcan)
# import the car from the fingerprint
cloudlog.info("controlsd is importing %s", CP.carName)
exec('from selfdrive.car.'+CP.carName+'.interface import CarInterface')
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
CI = CarInterface(CP, logcan, sendcan)
# write CarParams
Params().put("CarParams", CP.to_bytes())
AM = AlertManager()
LoC = LongControl()
LaC = LatControl()
# fake plan
plan = log.Plan.new_message()
plan.lateralValid = False
plan.longitudinalValid = False
last_plan_time = 0
# controls enabled state
enabled = False
last_enable_request = 0
# learned angle offset
angle_offset = 0
# rear view camera state
rear_view_toggle = False
v_cruise_kph = 255
# 0.0 - 1.0
awareness_status = 0.0
soft_disable_timer = None
# Is cpu temp too high to enable?
overtemp = False
free_space = 1.0
# start the loop
set_realtime_priority(2)
rk = Ratekeeper(rate, print_delay_threshold=2./1000)
while 1:
prof = Profiler()
cur_time = sec_since_boot()
# read CAN
CS = CI.update()
# broadcast carState
cs_send = messaging.new_message()
cs_send.init('carState')
cs_send.carState = CS # copy?
carstate.send(cs_send.to_bytes())
prof.checkpoint("CarInterface")
# did it request to enable?
enable_request, enable_condition = False, False
if enabled:
# gives the user 6 minutes
awareness_status -= 1.0/(100*60*6)
if awareness_status <= 0.:
AM.add("driverDistracted", enabled)
# reset awareness status on steering
if CS.steeringPressed:
awareness_status = 1.0
# handle button presses
for b in CS.buttonEvents:
print b
# reset awareness on any user action
awareness_status = 1.0
# button presses for rear view
if b.type == "leftBlinker" or b.type == "rightBlinker":
if b.pressed:
rear_view_toggle = True
else:
rear_view_toggle = False
if b.type == "altButton1" and b.pressed:
rear_view_toggle = not rear_view_toggle
if not CP.enableCruise and enabled and not b.pressed:
if b.type == "accelCruise":
v_cruise_kph = v_cruise_kph - (v_cruise_kph % V_CRUISE_DELTA) + V_CRUISE_DELTA
elif b.type == "decelCruise":
v_cruise_kph = v_cruise_kph - (v_cruise_kph % V_CRUISE_DELTA) - V_CRUISE_DELTA
v_cruise_kph = clip(v_cruise_kph, V_CRUISE_MIN, V_CRUISE_MAX)
if not enabled and b.type in ["accelCruise", "decelCruise"] and not b.pressed:
enable_request = True
# do disable on button down
if b.type == "cancel" and b.pressed:
AM.add("disable", enabled)
prof.checkpoint("Buttons")
# *** health checking logic ***
hh = messaging.recv_sock(health)
if hh is not None:
# if the board isn't allowing controls but somehow we are enabled!
if not hh.health.controlsAllowed and enabled:
AM.add("controlsMismatch", enabled)
# *** thermal checking logic ***
# thermal data, checked every second
td = messaging.recv_sock(thermal)
if td is not None:
# Check temperature.
overtemp = any(
t > 950
for t in (td.thermal.cpu0, td.thermal.cpu1, td.thermal.cpu2,
td.thermal.cpu3, td.thermal.mem, td.thermal.gpu))
# under 15% of space free
free_space = td.thermal.freeSpace
prof.checkpoint("Health")
# disable if the pedals are pressed while engaged, this is a user disable
if enabled:
if CS.gasPressed or CS.brakePressed:
AM.add("disable", enabled)
if enable_request:
# check for pressed pedals
if CS.gasPressed or CS.brakePressed:
AM.add("pedalPressed", enabled)
enable_request = False
else:
print "enabled pressed at", cur_time
last_enable_request = cur_time
# don't engage with less than 15% free
if free_space < 0.15:
AM.add("outOfSpace", enabled)
enable_request = False
if CP.enableCruise:
enable_condition = ((cur_time - last_enable_request) < 0.2) and CS.cruiseState.enabled
else:
enable_condition = enable_request
if CP.enableCruise and CS.cruiseState.enabled:
v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
prof.checkpoint("AdaptiveCruise")
# *** what's the plan ***
new_plan = messaging.recv_sock(plan_sock)
if new_plan is not None:
plan = new_plan.plan
plan = plan.as_builder() # plan can change in controls
last_plan_time = cur_time
# check plan for timeout
if cur_time - last_plan_time > 0.5:
plan.lateralValid = False
plan.longitudinalValid = False
# gives 18 seconds before decel begins (w 6 minute timeout)
if awareness_status < -0.05:
plan.aTargetMax = min(plan.aTargetMax, -0.2)
plan.aTargetMin = min(plan.aTargetMin, plan.aTargetMax)
if enable_request or enable_condition or enabled:
# add all alerts from car
for alert in CS.errors:
AM.add(alert, enabled)
if not plan.longitudinalValid:
AM.add("radarCommIssue", enabled)
if not plan.lateralValid:
# If the model is not broadcasting, assume that it is because
# the user has uploaded insufficient data for calibration.
# Other cases that would trigger this are rare and unactionable by the user.
AM.add("dataNeeded", enabled)
if overtemp:
AM.add("overheat", enabled)
# *** angle offset learning ***
if rk.frame % 5 == 2 and plan.lateralValid:
# *** run this at 20hz again ***
angle_offset = learn_angle_offset(enabled, CS.vEgo, angle_offset, np.asarray(plan.dPoly), LaC.y_des, CS.steeringPressed)
# *** gas/brake PID loop ***
final_gas, final_brake = LoC.update(enabled, CS.vEgo, v_cruise_kph,
plan.vTarget,
[plan.aTargetMin, plan.aTargetMax],
plan.jerkFactor, CP)
# *** steering PID loop ***
final_steer, sat_flag = LaC.update(enabled, CS.vEgo, CS.steeringAngle, CS.steeringPressed, plan.dPoly, angle_offset, CP)
prof.checkpoint("PID")
# ***** handle alerts ****
# send a "steering required alert" if saturation count has reached the limit
if sat_flag:
AM.add("steerSaturated", enabled)
if enabled and AM.alertShouldDisable():
print "DISABLING IMMEDIATELY ON ALERT"
enabled = False
if enabled and AM.alertShouldSoftDisable():
if soft_disable_timer is None:
soft_disable_timer = 3 * rate
elif soft_disable_timer == 0:
print "SOFT DISABLING ON ALERT"
enabled = False
else:
soft_disable_timer -= 1
else:
soft_disable_timer = None
if enable_condition and not enabled and not AM.alertPresent():
print "*** enabling controls"
# beep for enabling
AM.add("enable", enabled)
# enable both lateral and longitudinal controls
enabled = True
# on activation, let's always set v_cruise from where we are, even if PCM ACC is active
v_cruise_kph = int(round(max(CS.vEgo * CV.MS_TO_KPH, V_CRUISE_ENABLE_MIN)))
# 6 minutes driver you're on
awareness_status = 1.0
# reset the PID loops
LaC.reset()
# start long control at actual speed
LoC.reset(v_pid = CS.vEgo)
# *** push the alerts to current ***
alert_text_1, alert_text_2, visual_alert, audible_alert = AM.process_alerts(cur_time)
# ***** control the car *****
CC = car.CarControl.new_message()
CC.enabled = enabled
CC.gas = float(final_gas)
CC.brake = float(final_brake)
CC.steeringTorque = float(final_steer)
CC.cruiseControl.override = True
CC.cruiseControl.cancel = bool((not CP.enableCruise) or (not enabled and CS.cruiseState.enabled)) # always cancel if we have an interceptor
# brake discount removes a sharp nonlinearity
brake_discount = (1.0 - clip(final_brake*3., 0.0, 1.0))
CC.cruiseControl.speedOverride = float(max(0.0, ((LoC.v_pid - .5) * brake_discount)) if CP.enableCruise else 0.0)
#CC.cruiseControl.accelOverride = float(AC.a_pcm)
# TODO: fix this
CC.cruiseControl.accelOverride = float(1.0)
CC.hudControl.setSpeed = float(v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = enabled
CC.hudControl.lanesVisible = enabled
#CC.hudControl.leadVisible = bool(AC.has_lead)
# TODO: fix this
CC.hudControl.leadVisible = False
CC.hudControl.visualAlert = visual_alert
CC.hudControl.audibleAlert = audible_alert
# this alert will apply next controls cycle
if not CI.apply(CC):
AM.add("controlsFailed", enabled)
# broadcast carControl
cc_send = messaging.new_message()
cc_send.init('carControl')
cc_send.carControl = CC # copy?
carcontrol.send(cc_send.to_bytes())
prof.checkpoint("CarControl")
# ***** publish state to logger *****
# publish controls state at 100Hz
dat = messaging.new_message()
dat.init('live100')
# show rear view camera on phone if in reverse gear or when button is pressed
dat.live100.rearViewCam = ('reverseGear' in CS.errors) or rear_view_toggle
dat.live100.alertText1 = alert_text_1
dat.live100.alertText2 = alert_text_2
dat.live100.awarenessStatus = max(awareness_status, 0.0) if enabled else 0.0
# what packets were used to process
dat.live100.canMonoTimes = list(CS.canMonoTimes)
#dat.live100.mdMonoTime = PP.logMonoTime
#dat.live100.l20MonoTime = AC.logMonoTime
# if controls is enabled
dat.live100.enabled = enabled
# car state
dat.live100.vEgo = CS.vEgo
dat.live100.angleSteers = CS.steeringAngle
dat.live100.steerOverride = CS.steeringPressed
# longitudinal control state
dat.live100.vPid = float(LoC.v_pid)
dat.live100.vCruise = float(v_cruise_kph)
dat.live100.upAccelCmd = float(LoC.Up_accel_cmd)
dat.live100.uiAccelCmd = float(LoC.Ui_accel_cmd)
# lateral control state
dat.live100.yActual = float(LaC.y_actual)
dat.live100.yDes = float(LaC.y_des)
dat.live100.upSteer = float(LaC.Up_steer)
dat.live100.uiSteer = float(LaC.Ui_steer)
# processed radar state, should add a_pcm?
dat.live100.vTargetLead = float(plan.vTarget)
dat.live100.aTargetMin = float(plan.aTargetMin)
dat.live100.aTargetMax = float(plan.aTargetMax)
dat.live100.jerkFactor = float(plan.jerkFactor)
# lag
dat.live100.cumLagMs = -rk.remaining*1000.
live100.send(dat.to_bytes())
prof.checkpoint("Live100")
# *** run loop at fixed rate ***
if rk.keep_time():
prof.display()
def controlsd_thread(gctx=None, rate=100, default_bias=0.):
gc.disable()
# start the loop
set_realtime_priority(3)
context = zmq.Context()
params = Params()
# pub
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
livempc = messaging.pub_sock(context, service_list['liveMpc'].port)
is_metric = params.get("IsMetric") == "1"
passive = params.get("Passive") != "0"
if not passive:
while 1:
try:
sendcan = messaging.pub_sock(context,
service_list['sendcan'].port)
break
except zmq.error.ZMQError:
kill_defaultd()
else:
sendcan = None
# sub
poller = zmq.Poller()
thermal = messaging.sub_sock(context,
service_list['thermal'].port,
conflate=True,
poller=poller)
health = messaging.sub_sock(context,
service_list['health'].port,
conflate=True,
poller=poller)
cal = messaging.sub_sock(context,
service_list['liveCalibration'].port,
conflate=True,
poller=poller)
driver_monitor = messaging.sub_sock(context,
service_list['driverMonitoring'].port,
conflate=True,
poller=poller)
gps_location = messaging.sub_sock(context,
service_list['gpsLocationExternal'].port,
conflate=True,
poller=poller)
logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CI, CP = get_car(logcan, sendcan, 1.0 if passive else None)
if CI is None:
raise Exception("unsupported car")
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
fcw_enabled = params.get("IsFcwEnabled") == "1"
geofence = None
PL = Planner(CP, fcw_enabled)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(VM)
AM = AlertManager()
driver_status = DriverStatus()
if not passive:
AM.add("startup", False)
# write CarParams
params.put("CarParams", CP.to_bytes())
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
overtemp = False
free_space = False
cal_status = Calibration.INVALID
cal_perc = 0
mismatch_counter = 0
low_battery = False
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
# learned angle offset
angle_offset = default_bias
calibration_params = params.get("CalibrationParams")
if calibration_params:
try:
calibration_params = json.loads(calibration_params)
angle_offset = calibration_params["angle_offset2"]
except (ValueError, KeyError):
pass
prof = Profiler(False) # off by default
# Setup for real-time tuning
rt_tuning_file = '/data/.openpilot_rtt_params.pkl'
rtt_params = {}
last_mod_time = 0
while 1:
prof.checkpoint("Ratekeeper", ignore=True)
# sample data and compute car events
CS, events, cal_status, cal_perc, overtemp, free_space, low_battery, mismatch_counter = data_sample(
CI, CC, thermal, cal, health, driver_monitor, gps_location, poller,
cal_status, cal_perc, overtemp, free_space, low_battery,
driver_status, geofence, state, mismatch_counter, params)
prof.checkpoint("Sample")
# define plan
plan, plan_ts = calc_plan(CS, CP, events, PL, LaC, LoC, v_cruise_kph,
driver_status, geofence)
prof.checkpoint("Plan")
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# compute actuators
actuators, v_cruise_kph, driver_status, angle_offset = state_control(
plan, CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM,
rk, driver_status, PL, LaC, LoC, VM, angle_offset, passive,
is_metric, cal_perc)
prof.checkpoint("State Control")
# publish data
CC = data_send(PL.perception_state, plan, plan_ts, CS, CI, CP, VM,
state, events, actuators, v_cruise_kph, rk, carstate,
carcontrol, live100, livempc, AM, driver_status, LaC,
LoC, angle_offset, passive)
prof.checkpoint("Sent")
###################### Real-Time Tuning Add-on ########################
# TODO: Move this into it's own function to clean things up
# TODO: Need to delay until fingerprint, or is this after already?
# Run this once per second... on frame 29, of course.
if rk.frame % 100 == 29:
# Get the last update time of our real-time tuning file
#print('Real-Time Tuning: Checking tuning file modification time.')
try:
mod_time = os.path.getmtime(rt_tuning_file)
#print('RTT mod_time: {0}'.format(mod_time))
except OSError:
# File doesn't exist or is inaccessible
mod_time = None
print(
'Real-Time Tuning: RT_TUNING_FILE did not exist or was inaccessible.'
)
# If rt_tuning_file doesn't exist, then create it from the current CarParams:
if mod_time is None:
rtt_params['steerKpBP'] = list(
CP.steerKpBP
) # Note that the Kp/Ki are lists! But if you reference them directly they are <capnp list builder []>.. oops.
rtt_params['steerKpV'] = list(CP.steerKpV)
rtt_params['steerKiBP'] = list(CP.steerKiBP)
rtt_params['steerKiV'] = list(CP.steerKiV)
rtt_params['steerKf'] = CP.steerKf
# TODO: Give the option to link the front and rear tire stiffness changes together
rtt_params['tireStiffnessFront'] = CP.tireStiffnessFront
rtt_params['tireStiffnessRear'] = CP.tireStiffnessRear
rtt_params['steerRatio'] = CP.steerRatio
rtt_params['steerRateCost'] = CP.steerRateCost
rtt_params['latPidDeadzone'] = 0.0
rtt_params['steerActuatorDelay'] = CP.steerActuatorDelay
# rtt_params['Camera Offset'] = PL.PP.cam_offset
# Write the pickle file
# TODO: try/except the open
with open(rt_tuning_file, "wb") as f_write:
pickle.dump(
rtt_params, f_write,
-1) # Dump to file with highest protocol (fastest)
# No need to update next time if we just wrote the file out...
last_mod_time = os.path.getmtime(rt_tuning_file)
#print('RTT Last_mod_time: {0}'.format(last_mod_time))
# If file exists and has been updated since the last time we read it in
elif last_mod_time != mod_time:
print(
'Real-Time Tuning: Reading in the modified tuning file.')
# Read in parameters from file
# TODO: try/except the open
with open(rt_tuning_file, "rb") as f_read:
rtt_params = pickle.load(f_read)
# Sanity check the data before setting it.. format is [min, max, failsafe]
# Failsafe is used if a value is not found or if the value sent is out of the range limits
rt_data_limits = {
'steerKpBP': [0.0, 67.0, 0.0],
'steerKpV': [0.0, 1.0, 0.2],
'steerKiBP': [0.0, 67.0, 0.0],
'steerKiV': [0.0, 1.0, 0.05],
'steerKf': [0.0, 0.001, 0.00005],
'tireStiffnessFront': [20000, 1000000, 192150],
'tireStiffnessRear': [20000, 1000000, 202500],
'steerRatio': [8.0, 25.0, 14.0],
'steerRateCost': [0.05, 1.0, 0.5],
'latPidDeadzone': [0.0, 4.0, 0.0],
'steerActuatorDelay': [0.0, 0.5, 0.1]
# 'Camera Offset': [ -0.2, 0.2, 0.06 ]
}
# Do the checks and set the values
for key in rt_data_limits:
rt_val = rtt_params.get(key)
if rt_val is None:
# If this key from data limits doesn't exist in our tuning data, then add it as the failsafe
# TODO: Use CP value here instead of failsafe?
rtt_params[key] = rt_data_limits[key][2]
print(
'Real-Time Tuning: Value did not exist in tuning file, replaced with failsafe. Key: '
+ key)
continue
# If it does exist, then check the values. First see if it's a list
try:
# If it's an iterable list...
for i, val2 in enumerate(rt_val):
# Check each value in the list
if (val2 < rt_data_limits[key][0]) or (
val2 > rt_data_limits[key][1]):
rt_val[i] = rt_data_limits[key][2]
print(
'Real-Time Tuning: Invalid value replaced! Key: '
+ key)
except:
# Not interable, compare it and fix if necessary
if (rt_val < rt_data_limits[key][0]) or (
rt_val > rt_data_limits[key][1]):
rt_val = rt_data_limits[key][2]
print(
'Real-Time Tuning: Invalid value replaced! Key: '
+ key)
# Set it back so if anything was fixed we have the updated value
rtt_params[key] = rt_val
# Update CP with the new params
CP.steerKpBP = rtt_params['steerKpBP']
CP.steerKpV = rtt_params['steerKpV']
CP.steerKiBP = rtt_params['steerKiBP']
CP.steerKiV = rtt_params['steerKiV']
CP.steerKf = rtt_params['steerKf']
CP.tireStiffnessFront = rtt_params['tireStiffnessFront']
CP.tireStiffnessRear = rtt_params['tireStiffnessRear']
CP.steerRatio = rtt_params['steerRatio']
CP.steerActuatorDelay = rtt_params['steerActuatorDelay']
if CP.steerRateCost != rtt_params['steerRateCost']:
print(CP.steerRateCost)
print(rtt_params['steerRateCost'])
CP.steerRateCost = rtt_params['steerRateCost']
rt_mpc_flag = True
print(
'Real-Time Tuning: CP.steerRateCost changed - Re-initializing lateral MPC.'
)
else:
rt_mpc_flag = False
# TODO: try/except the open
# Write the pickle file back so if we fixed any data errors the revised values will show up on the client-side
with open(rt_tuning_file, "wb") as f_write:
pickle.dump(
rtt_params, f_write,
-1) # Dump to file with highest protocol (fastest)
# Set the last modified time to this write.... we don't need to read back in what we just wrote out
# Only set this if we were able to successfully make the write (once the try/except is added)
last_mod_time = os.path.getmtime(rt_tuning_file)
# Make updates in latcontrol, etc. I'm not sure if this is actually necessary, depends on if the objects are referenced or not. Anyway, one less thing to debug atm.
VM.update_rt_params(CP)
LaC.update_rt_params(VM,
rt_mpc_flag,
deadzone=rtt_params['latPidDeadzone'])
#PL.PP.update_rt_params(rtt_params['Camera Offset'])
#print('RTT Last_mod_time: {0}'.format(last_mod_time))
####### END OF REAL-TIME TUNING ADD-ON #######
# *** run loop at fixed rate ***
rk.keep_time()
prof.display()
def controlsd_thread(gctx=None, rate=100):
gc.disable()
# start the loop
set_realtime_priority(3)
##### AS
context = zmq.Context()
live100 = messaging.pub_sock(context, service_list['live100'].port)
carstate = messaging.pub_sock(context, service_list['carState'].port)
carcontrol = messaging.pub_sock(context, service_list['carControl'].port)
carla_socket = context.socket(zmq.PAIR)
carla_socket.bind("tcp://*:5560")
is_metric = True
passive = True
##### AS
# No sendcan if passive
if not passive:
sendcan = messaging.pub_sock(context, service_list['sendcan'].port)
else:
sendcan = None
# Sub sockets
poller = zmq.Poller()
#thermal = messaging.sub_sock(context, service_list['thermal'].port, conflate=True, poller=poller)
#health = messaging.sub_sock(context, service_list['health'].port, conflate=True, poller=poller)
cal = messaging.sub_sock(context,
service_list['liveCalibration'].port,
conflate=True,
poller=poller)
#driver_monitor = messaging.sub_sock(context, service_list['driverMonitoring'].port, conflate=True, poller=poller)
plan_sock = messaging.sub_sock(context,
service_list['plan'].port,
conflate=True,
poller=poller)
path_plan_sock = messaging.sub_sock(context,
service_list['pathPlan'].port,
conflate=True,
poller=poller)
#logcan = messaging.sub_sock(context, service_list['can'].port)
CC = car.CarControl.new_message()
CP = ToyotaInterface.get_params("TOYOTA PRIUS 2017", {})
CP.steerRatio = 1.0
CI = ToyotaInterface(CP, sendcan)
if CI is None:
raise Exception("unsupported car")
# if stock camera is connected, then force passive behavior
if not CP.enableCamera:
passive = True
sendcan = None
if passive:
CP.safetyModel = car.CarParams.SafetyModels.noOutput
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
LaC = LatControl(CP)
AM = AlertManager()
if not passive:
AM.add("startup", False)
state = State.enabled
soft_disable_timer = 0
v_cruise_kph = 50 ##### !!! change
v_cruise_kph_last = 0 ##### !! change
cal_status = Calibration.INVALID
cal_perc = 0
plan = messaging.new_message()
plan.init('plan')
path_plan = messaging.new_message()
path_plan.init('pathPlan')
rk = Ratekeeper(rate, print_delay_threshold=2. / 1000)
angle_offset = 0.
prof = Profiler(False) # off by default
startup = True ##### AS
while True:
start_time = int(sec_since_boot() * 1e9)
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_status, cal_perc, plan, path_plan =\
data_sample(CI, CC, plan_sock, path_plan_sock, cal, poller, cal_status, cal_perc, state, plan, path_plan, v_cruise_kph)
prof.checkpoint("Sample")
##### AS since we dont do preenabled state
if startup:
LaC.reset()
LoC.reset(v_pid=CS.vEgo)
if cal_status != Calibration.CALIBRATED:
continue
startup = False
path_plan_age = (start_time - path_plan.logMonoTime) / 1e9
plan_age = (start_time - plan.logMonoTime) / 1e9
if not path_plan.pathPlan.valid or plan_age > 0.5 or path_plan_age > 0.5:
print 'planner time too long'
#events.append(create_event('plannerError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
events += list(plan.plan.events)
# Only allow engagement with brake pressed when stopped behind another stopped car
#if CS.brakePressed and plan.plan.vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
# events.append(create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not passive:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, angle_offset, v_acc, a_acc = \
state_control(plan.plan, path_plan.pathPlan, CS, CP, state, events, v_cruise_kph,
v_cruise_kph_last, AM, rk,
LaC, LoC, VM, angle_offset, passive, is_metric, cal_perc)
prof.checkpoint("State Control")
# Publish data
CC = data_send(plan, path_plan, CS, CI, CP, VM, state, events,
actuators, v_cruise_kph, rk, carstate, carcontrol,
live100, AM, LaC, LoC, angle_offset, passive,
start_time, v_acc, a_acc, carla_socket)
prof.checkpoint("Sent")
rk.keep_time() # Run at 100Hz, no 20 Hz
prof.display()