def _open_port(device, baudrate, logfile=False, debug=False):
"""Open the serial communication port"""
try:
from serial.serialutil import SerialException
except ImportError:
raise ImportError("Python serial module not installed")
try:
from serial import serial_for_url, VERSION as serialver
versions = [int(x) for x in serialver.split(".", 1)]
if (versions[0] < 2) or (versions[1] < 6):
raise ValueError
except (ValueError, IndexError, ImportError):
raise ImportError("pyserial 2.6+ is required")
import pyftdi.serialext
try:
port = serial_for_url(device, baudrate=baudrate, timeout=0)
if logfile:
port.set_logger(logfile)
if not port.isOpen():
port.open()
if not port.isOpen():
raise AssertionError('Cannot open port "%s"' % device)
if debug:
print "Using serial backend '%s'" % port.BACKEND
return port
except SerialException, e:
raise AssertionError(str(e))
def _open_port(device, baudrate, logfile=False, debug=False):
"""Open the serial communication port"""
try:
from serial.serialutil import SerialException
except ImportError:
raise ImportError("Python serial module not installed")
try:
from serial import serial_for_url, VERSION as serialver
versions = [int(x) for x in serialver.split('.', 1)]
if (versions[0] < 2) or (versions[1] < 6):
raise ValueError
except (ValueError, IndexError, ImportError):
raise ImportError("pyserial 2.6+ is required")
import pyftdi.serialext
try:
port = serial_for_url(device, baudrate=baudrate, timeout=0)
if logfile:
port.set_logger(logfile)
if not port.isOpen():
port.open()
if not port.isOpen():
raise AssertionError('Cannot open port "%s"' % device)
if debug:
print "Using serial backend '%s'" % port.BACKEND
return port
except SerialException, e:
raise AssertionError(str(e))
def _open_port(device, baudrate, logfile=False, debug=False):
"""Open the serial communication port"""
try:
from serial.serialutil import SerialException
except ImportError:
raise ImportError("Python serial module not installed")
try:
from serial import serial_for_url, VERSION as serialver
version = tuple([int(x) for x in serialver.split('.')])
if version < (2,6):
raise ValueError
except (ValueError, IndexError, ImportError):
raise ImportError("pyserial 2.6+ is required")
# the following import enables serial protocol extensions
import pyftdi.serialext
try:
port = serial_for_url(device,
baudrate=baudrate,
timeout=0)
if logfile:
port.set_logger(logfile)
if not port.isOpen():
port.open()
if not port.isOpen():
raise IOError('Cannot open port "%s"' % device)
if debug:
print_("Using serial backend '%s'" % port.BACKEND)
return port
except SerialException as e:
raise IOError(str(e))
def _open_port(device, baudrate, logfile=False, debug=False):
"""Open the serial communication port"""
try:
from serial.serialutil import SerialException
except ImportError:
raise ImportError("Python serial module not installed")
try:
from serial import serial_for_url, VERSION as serialver
version = tuple([int(x) for x in serialver.split('.')])
if version < (2, 6):
raise ValueError
except (ValueError, IndexError, ImportError):
raise ImportError("pyserial 2.6+ is required")
# the following import enables serial protocol extensions
import pyftdi.serialext
try:
port = serial_for_url(device, baudrate=baudrate, timeout=0)
if logfile:
port.set_logger(logfile)
if not port.isOpen():
port.open()
if not port.isOpen():
raise IOError('Cannot open port "%s"' % device)
if debug:
print_("Using serial backend '%s'" % port.BACKEND)
return port
except SerialException as e:
raise IOError(str(e))
def is_correct_pyserial_version():
"""Returns whether the pyserial version is supported"""
version_tags = [int(version_tag)
for version_tag in PYSERIAL_VERSION.split('.')]
if version_tags[0] >= 3:
if version_tags[0] == 3 and version_tags[1] <= 3:
warn("PySerial out of date, please update to v3.4 if possible", stacklevel=0)
return True
return False
def _open_port(device, baudrate, parity, rtscts, debug=False):
"""Open the serial communication port"""
try:
from serial.serialutil import SerialException
from serial import PARITY_NONE
except ImportError:
raise ImportError("Python serial module not installed")
try:
from serial import serial_for_url, VERSION as serialver
version = tuple([int(x) for x in serialver.split('.')])
if version < (2, 6):
raise ValueError
except (ValueError, IndexError, ImportError):
raise ImportError("pyserial 2.6+ is required")
# the following import enables serial protocol extensions
if device.startswith('ftdi:'):
try:
from pyftdi import serialext
serialext.touch()
except ImportError:
raise ImportError("PyFTDI module not installed")
try:
port = serial_for_url(device,
baudrate=baudrate,
parity=parity or PARITY_NONE,
rtscts=rtscts,
timeout=0)
if not port.is_open:
port.open()
if not port.is_open:
raise IOError('Cannot open port "%s"' % device)
if debug:
backend = port.BACKEND if hasattr(port, 'BACKEND') else '?'
print("Using serial backend '%s'" % backend)
return port
except SerialException as exc:
raise IOError(str(exc))
def _open_port(device, baudrate, parity, rtscts, debug=False):
"""Open the serial communication port"""
try:
from serial.serialutil import SerialException
from serial import PARITY_NONE
except ImportError:
raise ImportError("Python serial module not installed")
try:
from serial import serial_for_url, VERSION as serialver
version = tuple([int(x) for x in serialver.split('.')])
if version < (2, 6):
raise ValueError
except (ValueError, IndexError, ImportError):
raise ImportError("pyserial 2.6+ is required")
# the following import enables serial protocol extensions
if device.startswith('ftdi:'):
try:
from pyftdi import serialext
serialext.touch()
except ImportError:
raise ImportError("PyFTDI module not installed")
try:
port = serial_for_url(device,
baudrate=baudrate,
parity=parity or PARITY_NONE,
rtscts=rtscts,
timeout=0)
if not port.is_open:
port.open()
if not port.is_open:
raise IOError('Cannot open port "%s"' % device)
if debug:
backend = hasattr(port, 'BACKEND') and port.BACKEND or '?'
print("Using serial backend '%s'" % backend)
return port
except SerialException as e:
raise IOError(str(e))
# Copyright (c) 2010-2016 Emmanuel Blot <*****@*****.**>
# Copyright (c) 2008-2015, Neotion
# All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
"""Serial modules compliant with pyserial APIs
"""
try:
from serial.serialutil import SerialException
except ImportError as exc:
raise ImportError("Python serial module not installed") from exc
try:
from serial import VERSION, serial_for_url as serial4url
version = tuple([int(x) for x in VERSION.split('.')])
if version < (3, 0):
raise ValueError
except (ValueError, IndexError, ImportError) as exc:
raise ImportError("pyserial 3.0+ is required") from exc
try:
from serial import protocol_handler_packages
protocol_handler_packages.append('pyftdi.serialext')
except ImportError as exc:
raise SerialException('Cannot register pyftdi extensions') from exc
serial_for_url = serial4url
def touch():
"""Do nothing, only for static checkers than do not like module import
with no module references
class FtdiSerial(SerialBase):
"""Base class for Serial port implementation compatible with pyserial API
using a USB device.
"""
BAUDRATES = sorted([9600 * (x+1) for x in range(6)] +
list(range(115200, 1000000, 115200)) +
list(range(1000000, 13000000, 100000)))
PYSERIAL_VERSION = tuple([int(x) for x in pyserialver.split('.')])
def open(self):
"""Open the initialized serial port"""
if self.port is None:
raise SerialException("Port must be configured before use.")
try:
device = Ftdi.create_from_url(self.port)
except (UsbToolsError, IOError) as ex:
raise SerialException('Unable to open USB port %s: %s' %
(self.portstr, str(ex)))
self.udev = device
self._set_open_state(True)
self._reconfigure_port()
def close(self):
"""Close the open port"""
self._set_open_state(False)
if self.udev:
self.udev.close()
self.udev = None
def read(self, size=1):
"""Read size bytes from the serial port. If a timeout is set it may
return less characters as requested. With no timeout it will block
until the requested number of bytes is read."""
data = bytearray()
start = now()
while True:
buf = self.udev.read_data(size)
data.extend(buf)
size -= len(buf)
if size <= 0:
break
if self._timeout is not None:
if buf:
break
ms = now()-start
if ms > self._timeout:
break
sleep(0.01)
return bytes(data)
def write(self, data):
"""Output the given string over the serial port."""
return self.udev.write_data(data)
def flush(self):
"""Flush of file like objects. In this case, wait until all data
is written."""
pass
def reset_input_buffer(self):
"""Clear input buffer, discarding all that is in the buffer."""
self.udev.purge_rx_buffer()
def reset_output_buffer(self):
"""Clear output buffer, aborting the current output and
discarding all that is in the buffer."""
self.udev.purge_tx_buffer()
def send_break(self, duration=0.25):
"""Send break condition."""
self.udev.set_break(True)
sleep(duration)
self.udev.set_break(False)
def _update_break_state(self):
"""Send break condition. Not supported"""
self.udev.set_break(self._break_state)
def _update_rts_state(self):
"""Set terminal status line: Request To Send"""
self.udev.set_rts(self._rts_state)
def _update_dtr_state(self):
"""Set terminal status line: Data Terminal Ready"""
self.udev.set_dtr(self._dtr_state)
@property
def usb_path(self):
"""Return the physical location as a triplet, only for debugging
purposes.
* bus is the USB bus
* address is the address on the USB bus
* interface is the interface number on the FTDI debice
:return: (bus, address, interface)
:rtype: tuple(int)
"""
return (self.udev.usb_dev.bus, self.udev.usb_dev.address,
self.udev.interface.bInterfaceNumber)
@property
def cts(self):
"""Read terminal status line: Clear To Send"""
return self.udev.get_cts()
@property
def dsr(self):
"""Read terminal status line: Data Set Ready"""
return self.udev.get_dsr()
@property
def ri(self):
"""Read terminal status line: Ring Indicator"""
return self.udev.get_ri()
@property
def cd(self):
"""Read terminal status line: Carrier Detect"""
return self.udev.get_cd()
@property
def in_waiting(self):
"""Return the number of characters currently in the input buffer."""
# not implemented
return 0
@property
def out_waiting(self):
"""Return the number of bytes currently in the output buffer."""
return 0
@property
def fifoSizes(self):
"""Return the (TX, RX) tupple of hardware FIFO sizes"""
return self.udev.fifo_sizes
def _reconfigure_port(self):
try:
self.udev.set_baudrate(self._baudrate)
self._baudrate = self.udev.baudrate
self.udev.set_line_property(self._bytesize,
self._stopbits,
self._parity)
if self._rtscts:
self.udev.set_flowctrl('hw')
elif self._xonxoff:
self.udev.set_flowctrl('sw')
else:
self.udev.set_flowctrl('')
try:
self.udev.set_dynamic_latency(12, 200, 50)
except AttributeError:
# backend does not support this feature
pass
except IOError as e:
err = self.udev.get_error_string()
raise SerialException("%s (%s)" % (str(e), err))
def _set_open_state(self, open_):
self.is_open = bool(open_)
class SocketSerial(SerialBase):
"""Fake serial port redirected to a Unix socket.
This is basically a copy of the serialposix serial port implementation
with redefined IO for a Unix socket"""
BACKEND = 'socket'
VIRTUAL_DEVICE = True
PYSERIAL_VERSION = tuple([int(x) for x in pyserialver.split('.')])
def _reconfigure_port(self):
pass
def makeDeviceName(self, port):
return port
def open(self):
"""Open the initialized serial port"""
if self._port is None:
raise SerialException("Port must be configured before use.")
if self.isOpen():
raise SerialException("Port is already open.")
self._dump = False
self.sock = None
try:
self.sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
filename = self.portstr[self.portstr.index('://')+3:]
if filename.startswith('~/'):
home = os.getenv('HOME')
if home:
filename = os.path.join(home, filename[2:])
self._filename = filename
self.sock.connect(self._filename)
except Exception as e:
self.close()
msg = "Could not open port: %s" % (str(e),)
if isinstance(e, socket.error):
raise SerialExceptionWithErrno(msg, e.errno)
else:
raise SerialException(msg)
self._set_open_state(True)
self._lastdtr = None
def close(self):
if self.sock:
try:
self.sock.shutdown(socket.SHUT_RDWR)
except Exception:
pass
try:
self.sock.close()
except Exception:
pass
self.sock = None
self._set_open_state(False)
def in_waiting(self):
"""Return the number of characters currently in the input buffer."""
return 0
def read(self, size=1):
"""Read size bytes from the serial port. If a timeout is set it may
return less characters as requested. With no timeout it will block
until the requested number of bytes is read."""
if self.sock is None:
raise portNotOpenError
read = bytearray()
if size > 0:
while len(read) < size:
ready, _, _ = select.select([self.sock], [], [], self._timeout)
if not ready:
break # timeout
buf = self.sock.recv(size-len(read))
if not len(buf):
# Some character is ready, but none can be read
# it is a marker for a disconnected peer
raise portNotOpenError
read += buf
if self._timeout >= 0 and not buf:
break # early abort on timeout
return read
def write(self, data):
"""Output the given string over the serial port."""
if self.sock is None:
raise portNotOpenError
t = len(data)
d = data
while t > 0:
try:
if self._writeTimeout is not None and self._writeTimeout > 0:
_, ready, _ = select.select([], [self.sock], [],
self._writeTimeout)
if not ready:
raise writeTimeoutError
n = self.sock.send(d)
if self._dump:
print(hexdump(d[:n]))
if self._writeTimeout is not None and self._writeTimeout > 0:
_, ready, _ = select.select([], [self.sock], [],
self._writeTimeout)
if not ready:
raise writeTimeoutError
d = d[n:]
t = t - n
except OSError as e:
if e.errno != errno.EAGAIN:
raise
def flush(self):
"""Flush of file like objects. In this case, wait until all data
is written."""
pass
def reset_input_buffer(self):
"""Clear input buffer, discarding all that is in the buffer."""
pass
def reset_output_buffer(self):
"""Clear output buffer, aborting the current output and
discarding all that is in the buffer."""
pass
def send_break(self, duration=0.25):
"""Send break condition. Not supported"""
def _update_break_state(self):
"""Send break condition. Not supported"""
pass
def _update_rts_state(self):
"""Set terminal status line: Request To Send"""
pass
def _update_dtr_state(self):
"""Set terminal status line: Data Terminal Ready"""
pass
def setDTR(self, on=1):
"""Set terminal status line: Data Terminal Ready"""
pass
@property
def cts(self):
"""Read terminal status line: Clear To Send"""
return True
@property
def dsr(self):
"""Read terminal status line: Data Set Ready"""
return True
@property
def ri(self):
"""Read terminal status line: Ring Indicator"""
return False
@property
def cd(self):
"""Read terminal status line: Carrier Detect"""
return False
# - - platform specific - - - -
def nonblocking(self):
"""internal - not portable!"""
if self.sock is None:
raise portNotOpenError
self.sock.setblocking(0)
def dump(self, enable):
self._dump = enable
# - - Helpers - -
def _set_open_state(self, open_):
if self.PYSERIAL_VERSION < (3, 0):
self._isOpen = bool(open_)
else:
self.is_open = bool(open_)
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
"""Serial modules compliant with pyserial APIs
"""
try:
from serial.serialutil import SerialException
except ImportError:
raise ImportError("Python serial module not installed")
try:
from serial import VERSION, serial_for_url as serial4url
version = tuple([int(x) for x in VERSION.split('.')])
if version < (3, 0):
raise ValueError
except (ValueError, IndexError, ImportError):
raise ImportError("pyserial 3.0+ is required")
try:
from serial import protocol_handler_packages
protocol_handler_packages.append('pyftdi.serialext')
except ImportError:
raise SerialException('Cannot register pyftdi extensions')
serial_for_url = serial4url
def touch():
"""Do nothing, only for static checkers than do not like module import
class UsbSerial(SerialBase):
"""Base class for Serial port implementation compatible with pyserial API
using a USB device.
"""
BAUDRATES = sorted([9600 * (x+1) for x in range(6)] +
list(range(115200, 1000000, 115200)) +
list(range(1000000, 13000000, 100000)))
PYSERIAL_VERSION = tuple([int(x) for x in pyserialver.split('.')])
def makeDeviceName(self, port):
return port
def open(self, devclass, scheme, vdict, pdict, default_vendor):
"""Open the initialized serial port"""
from serial import SerialException
if self._port is None:
raise SerialException("Port must be configured before use.")
try:
vendor, product, interface, sernum, ix = UsbTools.parse_url(
self.portstr, devclass, scheme, vdict, pdict, default_vendor)
except UsbToolsError as e:
raise SerialException(str(e))
try:
self.udev = devclass()
self.udev.open(vendor, product, interface, ix, sernum)
self.flushOutput()
self.flushInput()
except IOError:
raise SerialException('Unable to open USB port %s' % self.portstr)
self._set_open_state(True)
self._reconfigurePort()
self._product = product
def close(self):
"""Close the open port"""
self._set_open_state(False)
self.udev.close()
self.udev = None
def read(self, size=1):
"""Read size bytes from the serial port. If a timeout is set it may
return less characters as requested. With no timeout it will block
until the requested number of bytes is read."""
data = bytearray()
start = time.time()
while size > 0:
buf = self.udev.read_data(size)
data += buf
size -= len(buf)
if self._timeout > 0:
if buf:
break
ms = time.time()-start
if ms > self._timeout:
break
time.sleep(0.01)
return data
def write(self, data):
"""Output the given string over the serial port."""
self.udev.write_data(data)
def flush(self):
"""Flush of file like objects. In this case, wait until all data
is written."""
# do nothing
def flushInput(self):
"""Clear input buffer, discarding all that is in the buffer."""
self.udev.purge_rx_buffer()
def flushOutput(self):
"""Clear output buffer, aborting the current output and
discarding all that is in the buffer."""
self.udev.purge_tx_buffer()
def sendBreak(self):
"""Send break condition."""
# Not supported
pass
def setRTS(self, level=True):
"""Set terminal status line: Request To Send"""
self.udev.set_rts(level)
def setDTR(self, level=True):
"""Set terminal status line: Data Terminal Ready"""
self.udev.set_dtr(level)
def getCTS(self):
"""Read terminal status line: Clear To Send"""
return self.udev.get_cts()
def getDSR(self):
"""Read terminal status line: Data Set Ready"""
return self.udev.get_dsr()
def getRI(self):
"""Read terminal status line: Ring Indicator"""
return self.udev.get_ri()
def getCD(self):
"""Read terminal status line: Carrier Detect"""
return self.udev.get_cd()
def inWaiting(self):
"""Return the number of characters currently in the input buffer."""
# not implemented
return 0
@property
def fifoSizes(self):
"""Return the (TX, RX) tupple of hardware FIFO sizes"""
return self.udev.fifo_sizes
def _reconfigurePort(self):
try:
self.udev.set_baudrate(self._baudrate)
self.udev.set_line_property(self._bytesize,
self._stopbits,
self._parity)
if self._rtscts:
self.udev.set_flowctrl('hw')
elif self._xonxoff:
self.udev.set_flowctrl('sw')
else:
self.udev.set_flowctrl('')
try:
self.udev.set_dynamic_latency(2, 200, 400)
except AttributeError:
# backend does not support this feature
pass
except IOError as e:
from serial import SerialException
err = self.udev.get_error_string()
raise SerialException("%s (%s)" % (str(e), err))
_reconfigure_port = _reconfigurePort
def _set_open_state(self, open_):
if self.PYSERIAL_VERSION < (3, 0):
self._isOpen = bool(open_)
else:
self.is_open = bool(open_)
