Exemple #1
0
def initialize_barrow_cohorts(self):
    print '=================================== '
    print ' Initializing Lake & Pond Properties'
    print '===================================='
    initialize.LakePond(self)
    set_lake_pond_depth.set_lake_pond_depth(self)
    set_lake_ice_depth_constant.set_lake_ice_depth_constant(self)
    set_ice_thickness_array.set_ice_thickness_array(self)
    climate_expansion_arrays.set_climate_expansion_arrays(self)
    set_pond_growth_array.set_pond_growth_array(self)

    print '====================================='
    print ' Initializing Terrestrial Properties'
    print '====================================='
    initialize.Terrestrial_Barrow(self)
    read_ice_content.read_ice_content(self)
    read_drainage_efficiency.read_drainage_efficiency(self)
    read_initial_ALD.read_initial_ALD(self)
    set_ALD_constant.set_ALD_constant(self)
    set_ALD_array.set_ALD_array(self)
    set_protective_layer.set_protective_layer(self)
    set_initial_cumulative_probability.set_initial_cumulative_probability(self)
    # Initializing Terrestrial Cohort Properties 
    initialize.Wet_NPG(self)
    initialize.Wet_LCP(self)
    initialize.Wet_CLC(self)
    initialize.Wet_FCP(self)
    initialize.Wet_HCP(self)
    # Other needed information [in the future]
    initial_cohort_age.initial_cohort_age(self)
Exemple #2
0
def initialize_barrow_cohorts(self):
    print '=================================== '
    print ' Initializing Lake & Pond Properties'
    print '===================================='
    initialize.LakePond(self)
    set_lake_pond_depth.set_lake_pond_depth(self)
    set_lake_ice_depth_constant.set_lake_ice_depth_constant(self)
    set_ice_thickness_array.set_ice_thickness_array(self)
    climate_expansion_arrays.set_climate_expansion_arrays(self)
    set_pond_growth_array.set_pond_growth_array(self)
    print '====================================='
    print ' Initializing Terrestrial Properties'
    print '====================================='
    initialize.Terrestrial_Barrow(self)
    read_ice_content.read_ice_content(self)
    read_drainage_efficiency.read_drainage_efficiency(self)
    read_initial_ALD.read_initial_ALD(self)
    set_ALD_constant.set_ALD_constant(self)
    set_ALD_array.set_ALD_array(self)
    set_protective_layer.set_protective_layer(self)
    set_initial_cumulative_probability.set_initial_cumulative_probability(self)
    # Initializing Terrestrial Cohort Properties
    initialize.CLC_WT(self)
    initialize.CoastalWaters_WT(self)
    initialize.DrainedSlope_WT(self)
    initialize.FCP_WT(self)
    initialize.HCP_WT(self)
    initialize.LCP_WT(self)
    initialize.Meadow_WT(self)
    initialize.NoData_WT(self)
    initialize.SandDunes_WT(self)
    initialize.SaturatedBarrens_WT(self)
    initialize.Shrubs_WT(self)
    initialize.Urban_WT(self)
    initial_cohort_age.initial_cohort_age(self)
Exemple #3
0
    def run_attm(self):
        
        """ Program sequence """
        #====================================================
        # Initialization Process
        #====================================================
        print '==================='
        print ' Initializing ATTM'
        print '==================='
        read_control.read_control(self)
        initialize.initialize(self)
        read_layers.read_layers(self)
        model_domain.model_domain(self)
        create_attm_cohort_arrays.create_attm_cohort_arrays(self)
        if self.Simulation_area.lower() == 'barrow':
            initial_cohort_population.barrow_initial_cohort_population(self)
            initial_cohort_check.barrow_initial_cohort_check(self)
            cohort_present.barrow_cohort_present(self)
        elif self.Simulation_area.lower() == 'tanana':
            initial_cohort_population.tanana_initial_cohort_population(self)
            initial_cohort_check.tanana_initial_cohort_check(self)
            cohort_present.tanana_cohort_present(self)

         
        #=======================================
        # READ MET Data & Calculate Degree Days
        #=======================================
        initialize.Met(self)


        #++++++++++++++++++++++++++++++++++++++++++++++
        #  ========================================
        #    INITIALIZE BARROW COHORT PROPERTIES
        #  ========================================
        #++++++++++++++++++++++++++++++++++++++++++++++
        if self.Simulation_area.lower() == 'barrow':
            print '=================================== '
            print ' Initializing Lake & Pond Properties'
            print '===================================='
            initialize.LakePond(self)
            set_lake_pond_depth.set_lake_pond_depth(self)
            set_lake_ice_depth_constant.set_lake_ice_depth_constant(self)
            set_ice_thickness_array.set_ice_thickness_array(self)
            climate_expansion_arrays.set_climate_expansion_arrays(self)
            set_pond_growth_array.set_pond_growth_array(self)

            print '====================================='
            print ' Initializing Terrestrial Properties'
            print '====================================='
            initialize.Terrestrial_Barrow(self)
            read_ice_content.read_ice_content(self)
            read_drainage_efficiency.read_drainage_efficiency(self)
            read_initial_ALD.read_initial_ALD(self)
            set_ALD_constant.set_ALD_constant(self)
            set_ALD_array.set_ALD_array(self)
            set_protective_layer.set_protective_layer(self)
            set_initial_cumulative_probability.set_initial_cumulative_probability(self)
            # Initializing Terrestrial Cohort Properties 
            initialize.Wet_NPG(self)
            initialize.Wet_LCP(self)
            initialize.Wet_CLC(self)
            initialize.Wet_FCP(self)
            initialize.Wet_HCP(self)
            # Other needed information [in the future]
            initial_cohort_age.initial_cohort_age(self)

        elif self.Simulation_area.lower() == 'tanana':
            print '======================================'
            print ' Initializing Terrestrial Properties '
            print '======================================'
            initialize.Terrestrial_Tanana(self)


        print '=================================================='
        print '            Starting the MAIN LOOP '
        print '=================================================='

        initialize.run(self)
        for time in range(0, self.stop):
            if time == 0:
                if self.Simulation_area.lower() == 'barrow':
                    cohorts.initial_barrow(self)
                elif self.Simulation_area.lower() == 'tanana':
                    cohorts.initial_tanana(self)
            print '    at time step: ', time
            
            # ++++++++++++++++++++++++++++++++++++++
            # Check for significant climatic event
            # ++++++++++++++++++++++++++++++++++++++
            check_climate_event.check_climate_event(self)            
           
            # ----------------------------------------------------------
            # Looping over elements
            # ----------------------------------------------------------
            for element in range(0, self.ATTM_nrows * self.ATTM_ncols):
                
                # ----------------------------------------------------
                # Define the total fractional area of cohorts for
                # each element
                # ----------------------------------------------------
                cohort_start = cohort_check.cohort_start(self, element, time)
                
                # ----------------------------------------------------
                # Expand/Infill lake & ponds by prescribed rates
                # ----------------------------------------------------
                lake_pond_expansion.lake_pond_expansion(self, element)
                lake_pond_expansion.pond_infill(self, element, time)
                
                # ----------------------------------------------------------
                # Set active layer depth
                # ---------------------------------------------------------
                active_layer_depth.active_layer_depth(self, time, element)
                
                # ----------------------------------
                # Cycle through terrestrial cohorts
                # ----------------------------------
                check_Wet_NPG.check_Wet_NPG(self, element, time)
                check_Wet_LCP.check_Wet_LCP(self, element, time)
                check_Wet_CLC.check_Wet_CLC(self, element, time)
                check_Wet_FCP.check_Wet_FCP(self, element, time)
                check_Wet_HCP.check_Wet_HCP(self, element, time)

                # ----------------------------------
                # Set pond/lake ice thickness depth
                # ----------------------------------
                ice_thickness.ice_thickness(self, time, element)
                # ------------------------------
                # Cycle through ponds and lakes
                # ------------------------------
                check_Ponds.check_Ponds(self, element, time)
                check_Lakes.check_Lakes(self, element, time)
                 
                # -------------------------------------------------
                # Cohort Fraction Check (mass balance of cohorts)
                # -------------------------------------------------
                cohort_check.cohort_check(self, element, time, cohort_start)

                if time == self.stop-1:
                    if self.Simulation_area.lower() == 'barrow':
                        cohorts.final_barrow(self)
                    elif self.Simulation_area.lower() == 'tanana':
                        cohorts.final_tanana(self)
                    
            # ========================================================================
            # END MAIN LOOP 
            # ========================================================================
            
            # ========================================================================
            # OUTPUT RESULTS (if requested)
            # ========================================================================
            #  - - - - - - - - -
            # Fractional Areas
            #  - - - - - - - - -
            Output_cohorts_by_year.Output_cohorts_by_year(self, time)
            #  - - - - - - - - - - - - -
            # Dominant Fractional Area
            #  - - - - - - - - - - - - - 
            Output_cohorts_by_year.dominant_cohort(self)                 # Terrestrial_Control
            Output_cohorts_by_year.dominant_fractional_plot(self, time)  # Terrestrial_Control

        # =================================
        # OUTPUT ANIMATIONS (if requested)
        # =================================
        # - - - - - - - - - - - - - - -
        # Fractional Area of Cohorts
        # - - - - - - - - - - - - - - - -
        Output_cohorts_by_year.write_Fractions_avi(self)
        Output_cohorts_by_year.write_Dominant_Cohort_avi(self) # Terrestrial_Control

        # -------------------
        # Simulation End Time
        # -------------------
        clock.finish(self)
        
        #===========================
        # Output Simulation Results
        #===========================
        if self.results_onscreen.lower() == 'yes':
            results.on_screen(self)
        if self.archive_simulation.lower() == 'yes':
            results.on_file(self)

        
        # ================
        # Archive Results
        # ================
        if self.archive_simulation.lower() == 'yes':
        #----------------------------------------------------------------------------------------------------------
        # Create the tarfile
        #----------------------------------------------------------------------------------------------------------
            self.archive_file =tarfile.open(self.control['Run_dir']+self.Output_directory+str('/Archive/')+ \
                                            self.archive_time+str('_')+self.simulation_name+".tar.gz", mode='w:gz')
        #----------------------------------------------------------------------------------------------------------
            archive.read_archive(self)
            archive.archive(self)
            
        print '----------------------------------------'
        print '        Simulation Complete             '
        print '----------------------------------------'