def __init__(self, coordinates=None):
"""
Parameters
----------
coordinates : sequence
A sequence of (x, y [,z]) numeric coordinate pairs or triples.
Also can be a sequence of Point objects.
Rings are implicitly closed. There is no need to specific a final
coordinate pair identical to the first.
Example
-------
Construct a square ring.
>>> ring = LinearRing( ((0, 0), (0, 1), (1 ,1 ), (1 , 0)) )
>>> ring.is_closed
True
>>> ring.length
4.0
"""
BaseGeometry.__init__(self)
if coordinates is not None:
ret = geos_linearring_from_py(coordinates)
if ret is not None:
self._geom, self._ndim = ret
def __init__(self, shell=None, holes=None):
"""
Parameters
----------
shell : sequence
A sequence of (x, y [,z]) numeric coordinate pairs or triples.
Also can be a sequence of Point objects.
holes : sequence
A sequence of objects which satisfy the same requirements as the
shell parameters above
Example
-------
Create a square polygon with no holes
>>> coords = ((0., 0.), (0., 1.), (1., 1.), (1., 0.), (0., 0.))
>>> polygon = Polygon(coords)
>>> polygon.area
1.0
"""
BaseGeometry.__init__(self)
if shell is not None:
ret = geos_polygon_from_py(shell, holes)
if ret is not None:
self._geom, self._ndim = ret
else:
self._empty()
def __init__(self, coordinates=None):
"""Initialize.
Parameters
----------
coordinates : sequence or array
This may be an object that satisfies the numpy array protocol,
providing an M x 2 or M x 3 (with z) array, or it may be a sequence
of x, y (,z) coordinate sequences.
Example
-------
>>> geom = MultiPoint([[0.0, 0.0], [1.0, 2.0]])
>>> geom = MultiPoint(array([[0.0, 0.0], [1.0, 2.0]]))
Each result in a line string from (0.0, 0.0) to (1.0, 2.0).
"""
BaseGeometry.__init__(self)
if coordinates is None:
# allow creation of null lines, to support unpickling
pass
else:
self._geom, self._ndim = geos_multipoint_from_py(coordinates)
def __init__(self, shell=None, holes=None):
"""
Parameters
----------
shell : sequence
A sequence of (x, y [,z]) numeric coordinate pairs or triples
holes : sequence
A sequence of objects which satisfy the same requirements as the
shell parameters above
Example
-------
Create a square polygon with no holes
>>> coords = ((0., 0.), (0., 1.), (1., 1.), (1., 0.), (0., 0.))
>>> polygon = Polygon(coords)
>>> polygon.area
1.0
"""
BaseGeometry.__init__(self)
if shell is not None:
ret = geos_polygon_from_py(shell, holes)
if ret is not None:
self._geom, self._ndim = ret
else:
self.empty()
def __init__(self, coordinates=None):
"""Initialize.
Parameters
----------
coordinates : sequence
Contains coordinate sequences or objects that provide the numpy
array protocol, providing an M x 2 or M x 3 (with z) array.
Example
-------
>>> geom = MultiLineString( [[[0.0, 0.0], [1.0, 2.0]]] )
>>> geom = MultiLineString( [ array([[0.0, 0.0], [1.0, 2.0]]) ] )
Each result in a collection containing one line string.
"""
BaseGeometry.__init__(self)
if coordinates is None:
# allow creation of null lines, to support unpickling
pass
else:
self._geom, self._ndim = geos_multilinestring_from_py(coordinates)
def __init__(self, *args):
"""
Parameters
----------
There are 2 cases:
1) 1 parameter: this must satisfy the numpy array protocol.
2) 2 or more parameters: x, y, z : float
Easting, northing, and elevation.
"""
BaseGeometry.__init__(self)
if len(args) > 0:
self._set_coords(*args)
def __init__(self, *args):
"""
Parameters
----------
There are 2 cases:
1) 1 parameter: this must satisfy the numpy array protocol.
2) 2 or more parameters: x, y, z : float
Easting, northing, and elevation.
"""
BaseGeometry.__init__(self)
if len(args) > 0:
self._set_coords(*args)
def __init__(self, shell=None, holes=None):
"""Initialize.
Parameters
----------
exterior : sequence or array
This may be an object that satisfies the numpy array protocol,
providing an M x 2 or M x 3 (with z) array, or it may be a sequence
of x, y (,z) coordinate sequences.
Example
-------
>>> coords = ((0., 0.), (0., 1.), (1., 1.), (1., 0.), (0., 0.))
>>> polygon = Polygon(coords)
"""
BaseGeometry.__init__(self)
if shell is not None:
self._geom, self._ndim = geos_polygon_from_py(shell, holes)
def __init__(self, coordinates=None):
"""
Parameters
----------
coordinates : sequence
A sequence of (x, y [,z]) numeric coordinate pairs or triples or
an object that provides the numpy array interface, including
another instance of LineString.
Example
-------
Create a line with two segments
>>> a = LineString([[0, 0], [1, 0], [1, 1]])
>>> a.length
2.0
"""
BaseGeometry.__init__(self)
if coordinates is not None:
self._set_coords(coordinates)
def __init__(self, coordinates=None):
"""
Parameters
----------
coordinates : sequence
A sequence of (x, y [,z]) numeric coordinate pairs or triples or
an object that provides the numpy array interface, including
another instance of LineString.
Example
-------
Create a line with two segments
>>> a = LineString([[0, 0], [1, 0], [1, 1]])
>>> a.length
2.0
"""
BaseGeometry.__init__(self)
if coordinates is not None:
self._set_coords(coordinates)
def __init__(self, *args):
"""
Parameters
----------
There are 2 cases:
1) 1 parameter: this must satisfy the numpy array protocol.
2) 2 or more parameters: x, y, z : float
Easting, northing, and elevation.
"""
BaseGeometry.__init__(self)
if len(args) > 0:
if len(args) == 1:
self._geom, self._ndim = geos_point_from_py(args[0])
elif len(args) > 3:
raise TypeError(
"Point() takes at most 3 arguments ({} given)".format(
len(args)))
else:
self._geom, self._ndim = geos_point_from_py(tuple(args))
def __init__(self, coordinates=None):
"""Initialize.
Parameters
----------
coordinates : sequence or array
This may be an object that satisfies the numpy array protocol,
providing an M x 2 or M x 3 (with z) array, or it may be a sequence
of x, y (,z) coordinate sequences.
Rings are implicitly closed. There is no need to specific a final
coordinate pair identical to the first.
Example
-------
>>> ring = LinearRing( ((0.,0.), (0.,1.), (1.,1.), (1.,0.)) )
Produces a 1x1 square.
"""
BaseGeometry.__init__(self)
self._init_geom(coordinates)
def __init__(self, coordinates=None):
"""Initialize.
Parameters
----------
coordinates : sequence or array
This may be an object that satisfies the numpy array protocol,
providing an M x 2 or M x 3 (with z) array, or it may be a sequence
of x, y (,z) coordinate sequences.
Example
-------
>>> line = LineString([[0.0, 0.0], [1.0, 2.0]])
>>> line = LineString(array([[0.0, 0.0], [1.0, 2.0]]))
Each result in a line string from (0.0, 0.0) to (1.0, 2.0).
"""
BaseGeometry.__init__(self)
self._init_geom(coordinates)
def __init__(self, coordinates=None):
"""
Parameters
----------
coordinates : sequence
A sequence of (x, y [,z]) numeric coordinate pairs or triples
Rings are implicitly closed. There is no need to specific a final
coordinate pair identical to the first.
Example
-------
Construct a square ring.
>>> ring = LinearRing( ((0, 0), (0, 1), (1 ,1 ), (1 , 0)) )
>>> ring.is_closed
True
>>> ring.length
4.0
"""
BaseGeometry.__init__(self)
if coordinates is not None:
self._set_coords(coordinates)
def __init__(self, coordinates=None):
"""
Parameters
----------
coordinates : sequence
A sequence of (x, y [,z]) numeric coordinate pairs or triples
Rings are implicitly closed. There is no need to specific a final
coordinate pair identical to the first.
Example
-------
Construct a square ring.
>>> ring = LinearRing( ((0, 0), (0, 1), (1 ,1 ), (1 , 0)) )
>>> ring.is_closed
True
>>> ring.length
4.0
"""
BaseGeometry.__init__(self)
if coordinates is not None:
self._set_coords(coordinates)
