def __init__(self, param_file, case_name, calendar, out_dir, file_format):
self.param_file = param_file
f = Dataset(param_file, 'r+')
self.n_sources = len(f.dimensions['sources'])
self.n_outlets = len(f.dimensions['outlets'])
self.subset_length = f.variables['subset_length'][0]
self.full_time_length = f.variables['full_time_length'][0]
self.unit_hydrograph_dt = f.variables['unit_hydrograph_dt'][0]
self.source_lon = f.variables['source_lon'][:]
self.source_lat = f.variables['source_lat'][:]
self.source_x_ind = f.variables['source_x_ind'][:]
self.source_y_ind = f.variables['source_y_ind'][:]
self.source_time_offset = f.variables['source_time_offset'][:]
self.source2outlet_ind = f.variables['source2outlet_ind'][:]
self.outlet_x_ind = f.variables['outlet_x_ind'][:]
self.outlet_y_ind = f.variables['outlet_y_ind'][:]
self.outlet_lon = f.variables['outlet_lon'][:]
self.outlet_lat = f.variables['outlet_lat'][:]
self.outlet_mask = f.variables['outlet_mask'][:]
self.outlet_decomp_ind = f.variables['outlet_decomp_ind'][:]
self.unit_hydrograph = f.variables['unit_hydrograph'][:]
self.RvicDomainFile = f.RvicDomainFile
self.RvicPourPointsFile = f.RvicPourPointsFile
self.RvicUHFile = f.RvicUHFile
self.RvicFdrFile = f.RvicFdrFile
self.file_format = file_format
self.glob_atts = NcGlobals(title='RVIC restart file',
RvicPourPointsFile=f.RvicPourPointsFile,
RvicUHFile=f.RvicUHFile,
RvicFdrFile=f.RvicFdrFile,
RvicDomainFile=f.RvicDomainFile,
casename=case_name)
f.close()
# ------------------------------------------------------------ #
# Initialize state variables
self.ring = np.zeros((self.full_time_length, self.n_outlets, len(RVIC_TRACERS)))
# ------------------------------------------------------------ #
self._calendar = calendar
self.__fname_format = os.path.join(out_dir, "%s.r.%%Y-%%m-%%d-%%H-%%M-%%S.nc" % (case_name))
# CESM calendar key (only NO_LEAP_C, GREGORIAN are supported in CESM)
self._calendar_key = 0
for key, cals in CALENDAR_KEYS.iteritems():
if self._calendar in cals:
self._calendar_key = key
break
def __init__(self, param_file, case_name, calendar, out_dir, file_format):
self.param_file = param_file
f = Dataset(param_file, 'r')
self.n_sources = len(f.dimensions['sources'])
self.n_outlets = len(f.dimensions['outlets'])
self.subset_length = f.variables['subset_length'][0]
self.full_time_length = f.variables['full_time_length'][0]
self.unit_hydrograph_dt = f.variables['unit_hydrograph_dt'][0]
self.source_lon = f.variables['source_lon'][:]
self.source_lat = f.variables['source_lat'][:]
self.source_x_ind = f.variables['source_x_ind'][:]
self.source_y_ind = f.variables['source_y_ind'][:]
self.source_time_offset = f.variables['source_time_offset'][:]
self.source2outlet_ind = f.variables['source2outlet_ind'][:]
self.outlet_x_ind = f.variables['outlet_x_ind'][:]
self.outlet_y_ind = f.variables['outlet_y_ind'][:]
self.outlet_lon = f.variables['outlet_lon'][:]
self.outlet_lat = f.variables['outlet_lat'][:]
self.outlet_mask = f.variables['outlet_mask'][:]
self.outlet_decomp_ind = f.variables['outlet_decomp_ind'][:]
self.unit_hydrograph = {}
for tracer in RVIC_TRACERS:
tname = 'unit_hydrograph_{0}'.format(tracer)
try:
self.unit_hydrograph[tracer] = f.variables[tname][:]
except KeyError:
log.warning('Could not find unit hydrograph var %s', tname)
log.warning('trying var name unit_hydrograph')
self.unit_hydrograph[tracer] = f.variables['unit_hydrograph'][:]
except:
raise ValueError('Cant find Unit Hydrograph Variable')
self.outlet_name = f.variables['outlet_name'][:]
self.RvicDomainFile = f.RvicDomainFile
self.RvicPourPointsFile = f.RvicPourPointsFile
self.RvicUHFile = f.RvicUHFile
self.RvicFdrFile = f.RvicFdrFile
self.file_format = file_format
self.glob_atts = NcGlobals(title='RVIC restart file',
RvicPourPointsFile=f.RvicPourPointsFile,
RvicUHFile=f.RvicUHFile,
RvicFdrFile=f.RvicFdrFile,
RvicDomainFile=f.RvicDomainFile,
casename=case_name)
f.close()
# ------------------------------------------------------------ #
# Initialize state variables
self.ring = {}
for tracer in RVIC_TRACERS:
self.ring[tracer] = np.zeros((self.full_time_length,
self.n_outlets,),
dtype=np.float64)
# ------------------------------------------------------------ #
self._calendar = calendar
self.__fname_format = os.path.join(out_dir, "%s.r.%%Y-%%m-%%d-%%H-%%M-%%S.nc" % (case_name))
# CESM calendar key (only NO_LEAP_C, GREGORIAN are supported in CESM)
self._calendar_key = 0
for key, cals in CALENDAR_KEYS.iteritems():
if self._calendar in cals:
self._calendar_key = key
break
class Rvar(object):
""" Creates a RVIC structure """
# ---------------------------------------------------------------- #
# Initialize
def __init__(self, param_file, case_name, calendar, out_dir, file_format):
self.param_file = param_file
f = Dataset(param_file, 'r')
self.n_sources = len(f.dimensions['sources'])
self.n_outlets = len(f.dimensions['outlets'])
self.subset_length = f.variables['subset_length'][0]
self.full_time_length = f.variables['full_time_length'][0]
self.unit_hydrograph_dt = f.variables['unit_hydrograph_dt'][0]
self.source_lon = f.variables['source_lon'][:]
self.source_lat = f.variables['source_lat'][:]
self.source_x_ind = f.variables['source_x_ind'][:]
self.source_y_ind = f.variables['source_y_ind'][:]
self.source_time_offset = f.variables['source_time_offset'][:]
self.source2outlet_ind = f.variables['source2outlet_ind'][:]
self.outlet_x_ind = f.variables['outlet_x_ind'][:]
self.outlet_y_ind = f.variables['outlet_y_ind'][:]
self.outlet_lon = f.variables['outlet_lon'][:]
self.outlet_lat = f.variables['outlet_lat'][:]
self.outlet_mask = f.variables['outlet_mask'][:]
self.outlet_decomp_ind = f.variables['outlet_decomp_ind'][:]
self.unit_hydrograph = {}
for tracer in RVIC_TRACERS:
tname = 'unit_hydrograph_{0}'.format(tracer)
try:
self.unit_hydrograph[tracer] = f.variables[tname][:]
except KeyError:
log.warning('Could not find unit hydrograph var %s', tname)
log.warning('trying var name unit_hydrograph')
self.unit_hydrograph[tracer] = f.variables['unit_hydrograph'][:]
except:
raise ValueError('Cant find Unit Hydrograph Variable')
self.outlet_name = f.variables['outlet_name'][:]
self.RvicDomainFile = f.RvicDomainFile
self.RvicPourPointsFile = f.RvicPourPointsFile
self.RvicUHFile = f.RvicUHFile
self.RvicFdrFile = f.RvicFdrFile
self.file_format = file_format
self.glob_atts = NcGlobals(title='RVIC restart file',
RvicPourPointsFile=f.RvicPourPointsFile,
RvicUHFile=f.RvicUHFile,
RvicFdrFile=f.RvicFdrFile,
RvicDomainFile=f.RvicDomainFile,
casename=case_name)
f.close()
# ------------------------------------------------------------ #
# Initialize state variables
self.ring = {}
for tracer in RVIC_TRACERS:
self.ring[tracer] = np.zeros((self.full_time_length,
self.n_outlets,),
dtype=np.float64)
# ------------------------------------------------------------ #
self._calendar = calendar
self.__fname_format = os.path.join(out_dir, "%s.r.%%Y-%%m-%%d-%%H-%%M-%%S.nc" % (case_name))
# CESM calendar key (only NO_LEAP_C, GREGORIAN are supported in CESM)
self._calendar_key = 0
for key, cals in CALENDAR_KEYS.iteritems():
if self._calendar in cals:
self._calendar_key = key
break
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Check that dom file matches
def _check_domain_file(self, domain_file):
"""
Confirm that the dom files match in the parameter and domain files
"""
input_file = os.path.split(domain_file)[1]
log.info('domain_file: %s', input_file)
log.info('Parameter RvicDomainFile: %s', self.RvicDomainFile)
if input_file == self.RvicDomainFile:
log.info('dom files match in parameter and domain file')
else:
raise ValueError('dom files do not match in parameter and '
'domain file')
# ---------------------------------------------------------------- #
def set_domain(self, dom_data, domain):
""" Set the domain size """
self._check_domain_file(domain['FILE_NAME'])
self.domain_shape = dom_data[domain['LAND_MASK_VAR']].shape
self.ysize = self.domain_shape[0]
self.xsize = self.domain_shape[1]
if self.source_y_ind.max() >= self.ysize:
raise ValueError('source_y_ind.max() ({0}) > domain ysize'
' ({1})'.format(self.source_y_ind, self.ysize))
if self.source_x_ind.max() >= self.xsize:
raise ValueError('source_x_ind.max() ({0}) > domain xsize'
' ({1})'.format(self.source_x_ind, self.xsize))
log.info('set domain')
# ---------------------------------------------------------------- #
# Initilize State
def init_state(self, state_file, run_type, timestamp):
if run_type in ['startup', 'restart']:
log.info('reading state_file: %s', state_file)
f = Dataset(state_file, 'r')
for tracer in RVIC_TRACERS:
self.ring[tracer] = f.variables['{0}_ring'.format(tracer)][:]
file_timestamp = ord_to_datetime(f.variables['time'][:],
f.variables['time'].units,
calendar=f.variables['time'].calendar)
if run_type == 'restart':
self.timestamp = file_timestamp
elif run_type == 'startup':
self.timestamp = timestamp
if timestamp != file_timestamp:
log.warning('restart timestamps do not match (%s, %s',
file_timestamp, self.timestamp)
log.warning('Runtype is startup so model will continue')
else:
raise ValueError('unknown run_type: {0}'.format(run_type))
# Check that timestep and outlet_decomp_ids match ParamFile
if f.variables['unit_hydrograph_dt'][:] != self.unit_hydrograph_dt:
raise ValueError('Timestep in Statefile does not match '
'timestep in ParamFile')
if not np.array_equal(f.variables['outlet_decomp_ind'][:],
self.outlet_decomp_ind):
raise ValueError('outlet_decomp_ind in Statefile does not '
'match ParamFile')
if f.RvicDomainFile != self.RvicDomainFile:
raise ValueError('RvicDomainFile in StateFile does not match '
'ParamFile')
f.close()
elif run_type == 'drystart':
log.info('run_type is drystart so no state_file will be read')
self.timestamp = timestamp
self.time_ord = date2num(self.timestamp, TIMEUNITS,
calendar=self._calendar)
self._start_date = self.timestamp
self._start_ord = self.time_ord
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Convolve
def convolve(self, aggrunin, time_ord):
"""
This convoluition funciton works by looping over all points and doing
the convolution one timestep at a time. This is accomplished by
creating a convolution ring. Contributing flow from each timestep is
added to the convolution ring. The convolution ring is saved as the
state. The first column of values in the ring are the current runoff.
"""
# ------------------------------------------------------------ #
# Check that the time_ord is in sync
# This is the time at the start of the current step (end of last step)
if self.time_ord != time_ord:
log.error('rout_var.time_ord = %s, time_ord = %s', self.time_ord,
time_ord)
raise ValueError('rout_var.time_ord does not match the time_ord '
'passed in by the convolution call')
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Do the convolution
log.debug('convolving')
for tracer in RVIC_TRACERS:
# -------------------------------------------------------- #
# First update the ring
log.debug('rolling the ring')
# Zero out current ring
self.ring[tracer][0, :] = 0.
# Equivalent to Fortran 90 cshift function
self.ring[tracer] = np.roll(self.ring[tracer], -1, axis=0)
# -------------------------------------------------------- #
# -------------------------------------------------------- #
# C convolution call
rvic_convolve(self.n_sources,
self.n_outlets,
self.subset_length,
self.xsize,
self.source2outlet_ind,
self.source_y_ind,
self.source_x_ind,
self.source_time_offset,
self.unit_hydrograph[tracer][:, :],
aggrunin[tracer],
self.ring[tracer][:, :])
# -------------------------------------------------------- #
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# move the time_ord forward
self.time_ord += self.unit_hydrograph_dt / SECSPERDAY
self.timestamp = ord_to_datetime(self.time_ord, TIMEUNITS,
calendar=self._calendar)
return self.timestamp
# ------------------------------------------------------------ #
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def get_time_mode(self, cpl_secs_per_step):
"""
Determine the relationship between the coupling period and the unit-
hydrograph period. In cases where they do not match, the model will
aggregate the appropriate quantities before/after the confolution step.
"""
log.info('Coupling Timestep is (seconds): %s', cpl_secs_per_step)
log.info('RVIC Timestep is (seconds): %s', self.unit_hydrograph_dt)
if (self.unit_hydrograph_dt % cpl_secs_per_step == 0) and \
(self.unit_hydrograph_dt >= cpl_secs_per_step):
self.agg_tsteps = self.unit_hydrograph_dt/cpl_secs_per_step
else:
log.error('unit_hydrograph_dt must be a multiple of the '
'cpl_secs_per_step')
raise ValueError("Stopped due to error in determining agg_tsteps")
log.info('RVIC will run 1 time for every %i coupling periods',
self.agg_tsteps)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def get_rof(self):
"""Extract the current rof"""
rof = {}
for tracer in RVIC_TRACERS:
rof[tracer] = self.ring[tracer][0, :]
return rof # Current timestep flux (units=kg m-2 s-1)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def get_storage(self):
"""Extract the current storage"""
storage = {}
for tracer in RVIC_TRACERS:
storage[tracer] = self.ring[tracer].sum(axis=1)
return storage
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def write_initial(self):
"""write initial flux"""
pass
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Write the current state
def write_restart(self, current_history_files, history_restart_files):
# ------------------------------------------------------------ #
# Open file
filename = self.timestamp.strftime(self.__fname_format)
f = Dataset(filename, 'w', self.file_format)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Time Variables
# Current time
time = f.createDimension('time', 1)
time = f.createVariable('time', NC_DOUBLE, ('time',))
time[:] = date2num(self.timestamp, TIMEUNITS, calendar=self._calendar)
for key, val in share.time.__dict__.iteritems():
if val:
setattr(time, key, val)
time.calendar = self._calendar
# Timesteps
timesteps = f.createDimension('timesteps', self.full_time_length)
timesteps = f.createVariable('timesteps', NC_DOUBLE, ('timesteps',))
timesteps[:] = np.arange(self.full_time_length)
for key, val in share.timesteps.__dict__.iteritems():
if val:
setattr(timesteps, key, val)
timesteps.timestep_length = 'unit_hydrograph_dt'
# UH timestep
unit_hydrograph_dt = f.createVariable('unit_hydrograph_dt',
NC_DOUBLE, ())
unit_hydrograph_dt[:] = self.unit_hydrograph_dt
for key, val in share.unit_hydrograph_dt.__dict__.iteritems():
if val:
setattr(unit_hydrograph_dt, key, val)
timemgr_rst_type = f.createVariable('timemgr_rst_type', NC_DOUBLE, ())
timemgr_rst_type[:] = self._calendar_key
for key, val in share.timemgr_rst_type.__dict__.iteritems():
if val:
setattr(timemgr_rst_type, key, val)
timemgr_rst_step_sec = f.createVariable('timemgr_rst_step_sec',
NC_DOUBLE, ())
timemgr_rst_step_sec[:] = self.unit_hydrograph_dt
for key, val in share.timemgr_rst_step_sec.__dict__.iteritems():
if val:
setattr(timemgr_rst_step_sec, key, val)
timemgr_rst_start_ymd = f.createVariable('timemgr_rst_start_ymd',
NC_DOUBLE, ())
timemgr_rst_start_ymd[:] = self._start_date.year*10000 \
+ self._start_date.month*100 + self._start_date.day
for key, val in share.timemgr_rst_start_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_start_ymd, key, val)
timemgr_rst_start_tod = f.createVariable('timemgr_rst_start_tod',
NC_DOUBLE, ())
timemgr_rst_start_tod[:] = (self._start_ord % 1) * SECSPERDAY
for key, val in share.timemgr_rst_start_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_start_tod, key, val)
timemgr_rst_ref_ymd = f.createVariable('timemgr_rst_ref_ymd',
NC_DOUBLE, ())
timemgr_rst_ref_ymd[:] = REFERENCE_DATE
for key, val in share.timemgr_rst_ref_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_ref_ymd, key, val)
timemgr_rst_ref_tod = f.createVariable('timemgr_rst_ref_tod',
NC_DOUBLE, ())
timemgr_rst_ref_tod[:] = REFERENCE_TIME
for key, val in share.timemgr_rst_ref_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_ref_tod, key, val)
timemgr_rst_curr_ymd = f.createVariable('timemgr_rst_curr_ymd',
NC_DOUBLE, ())
timemgr_rst_curr_ymd[:] = self.timestamp.year*10000 + \
self.timestamp.month*100+self.timestamp.day
for key, val in share.timemgr_rst_curr_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_curr_ymd, key, val)
timemgr_rst_curr_tod = f.createVariable('timemgr_rst_curr_tod',
NC_DOUBLE, ())
timemgr_rst_curr_tod[:] = (self.time_ord % 1)*SECSPERDAY
for key, val in share.timemgr_rst_curr_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_curr_tod, key, val)
# ------------------------------------------------------------ #
# Setup Tape Dimensions
coords = ('tapes', 'max_chars')
ntapes = f.createDimension(coords[0], len(history_restart_files))
ntapes = f.createDimension(coords[1], MAX_NC_CHARS)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Write Fields
locfnh = f.createVariable('locfnh', NC_CHAR, coords)
for i, string in enumerate(current_history_files):
locfnh[i, :] = stringtochar(np.array(string.ljust(MAX_NC_CHARS)))
locfnh.long_name = 'History filename'
locfnh.comment = 'This variable NOT needed for startup or branch simulations'
locfnhr = f.createVariable('locfnhr', NC_CHAR, coords)
for i, string in enumerate(history_restart_files):
locfnh[i, :] = stringtochar(np.array(string.ljust(MAX_NC_CHARS)))
locfnhr.long_name = 'History restart filename'
locfnhr.comment = 'This variable NOT needed for startup or branch simulations'
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Setup Point Dimensions
coords = ('outlets', )
outlets = f.createDimension(coords[0], self.n_outlets)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Write Fields
oyi = f.createVariable('outlet_y_ind', NC_INT, coords[0])
oyi[:] = self.outlet_y_ind
for key, val in share.outlet_y_ind.__dict__.iteritems():
if val:
setattr(oyi, key, val)
oxi = f.createVariable('outlet_x_ind', NC_INT, coords[0])
oxi[:] = self.outlet_x_ind
for key, val in share.outlet_x_ind.__dict__.iteritems():
if val:
setattr(oxi, key, val)
odi = f.createVariable('outlet_decomp_ind', NC_INT, coords[0])
odi[:] = self.outlet_decomp_ind
for key, val in share.outlet_decomp_ind.__dict__.iteritems():
if val:
setattr(odi, key, val)
tcoords = ('timesteps', ) + coords
for tracer in RVIC_TRACERS:
ring = f.createVariable('{0}_ring'.format(tracer),
NC_DOUBLE, tcoords)
ring[:, :] = self.ring[tracer][:, :]
for key, val in share.ring.__dict__.iteritems():
if val:
setattr(ring, key, val)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# write global attributes
self.glob_atts.update()
for key, val in self.glob_atts.atts.iteritems():
if val:
setattr(f, key, val)
# ------------------------------------------------------------ #
f.close()
log.info('Finished writing %s', filename)
return filename
def __init__(self,
param_file,
case_name,
calendar,
out_dir,
file_format,
zlib=True,
complevel=4,
least_significant_digit=None):
self.param_file = param_file
f = Dataset(param_file, 'r')
self.n_sources = len(f.dimensions['sources'])
self.n_outlets = len(f.dimensions['outlets'])
self.subset_length = int(f.variables['subset_length'][:])
self.full_time_length = int(f.variables['full_time_length'][:])
self.unit_hydrograph_dt = f.variables['unit_hydrograph_dt'][:]
self.source_lon = f.variables['source_lon'][:]
self.source_lat = f.variables['source_lat'][:]
self.source_x_ind = f.variables['source_x_ind'][:]
self.source_y_ind = f.variables['source_y_ind'][:]
self.source_time_offset = f.variables['source_time_offset'][:]
self.source2outlet_ind = f.variables['source2outlet_ind'][:]
self.outlet_x_ind = f.variables['outlet_x_ind'][:]
self.outlet_y_ind = f.variables['outlet_y_ind'][:]
self.outlet_lon = f.variables['outlet_lon'][:]
self.outlet_lat = f.variables['outlet_lat'][:]
self.outlet_mask = f.variables['outlet_mask'][:]
self.outlet_decomp_ind = f.variables['outlet_decomp_ind'][:]
self.unit_hydrograph = {}
for tracer in RVIC_TRACERS:
tname = 'unit_hydrograph_{0}'.format(tracer)
try:
self.unit_hydrograph[tracer] = f.variables[tname][:]
except KeyError:
log.warning('Could not find unit hydrograph var %s', tname)
log.warning('trying var name unit_hydrograph')
self.unit_hydrograph[tracer] = f.variables[
'unit_hydrograph'][:]
except:
raise ValueError('Cant find Unit Hydrograph Variable')
self.outlet_name = f.variables['outlet_name'][:]
self.RvicDomainFile = f.RvicDomainFile
self.RvicPourPointsFile = f.RvicPourPointsFile
self.RvicUHFile = f.RvicUHFile
self.RvicFdrFile = f.RvicFdrFile
self.file_format = file_format
try:
self.outlet_upstream_area = f.variables['outlet_upstream_area'][:]
except:
self.outlet_upstream_area = None
self.glob_atts = NcGlobals(title='RVIC restart file',
RvicPourPointsFile=f.RvicPourPointsFile,
RvicUHFile=f.RvicUHFile,
RvicFdrFile=f.RvicFdrFile,
RvicDomainFile=f.RvicDomainFile,
casename=case_name)
f.close()
# ------------------------------------------------------------ #
# Initialize state variables
self.ring = {}
for tracer in RVIC_TRACERS:
self.ring[tracer] = np.zeros((
self.full_time_length,
self.n_outlets,
),
dtype=np.float64)
# ------------------------------------------------------------ #
self._calendar = calendar
self.__fname_format = os.path.join(
out_dir, "%s.r.%%Y-%%m-%%d-%%H-%%M-%%S.nc" % (case_name))
# ------------------------------------------------------------ #
# CESM calendar key (only NO_LEAP_C, GREGORIAN are supported in CESM)
self._calendar_key = 0
for key, cals in CALENDAR_KEYS.iteritems():
if self._calendar in cals:
self._calendar_key = key
break
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# netCDF variable options
self.ncvaropts = {
'zlib': zlib,
'complevel': complevel,
'least_significant_digit': least_significant_digit
}
class Rvar(object):
""" Creates a RVIC structure """
# ---------------------------------------------------------------- #
# Initialize
def __init__(self,
param_file,
case_name,
calendar,
out_dir,
file_format,
zlib=True,
complevel=4,
least_significant_digit=None):
self.param_file = param_file
f = Dataset(param_file, 'r')
self.n_sources = len(f.dimensions['sources'])
self.n_outlets = len(f.dimensions['outlets'])
self.subset_length = int(f.variables['subset_length'][:])
self.full_time_length = int(f.variables['full_time_length'][:])
self.unit_hydrograph_dt = f.variables['unit_hydrograph_dt'][:]
self.source_lon = f.variables['source_lon'][:]
self.source_lat = f.variables['source_lat'][:]
self.source_x_ind = f.variables['source_x_ind'][:]
self.source_y_ind = f.variables['source_y_ind'][:]
self.source_time_offset = f.variables['source_time_offset'][:]
self.source2outlet_ind = f.variables['source2outlet_ind'][:]
self.outlet_x_ind = f.variables['outlet_x_ind'][:]
self.outlet_y_ind = f.variables['outlet_y_ind'][:]
self.outlet_lon = f.variables['outlet_lon'][:]
self.outlet_lat = f.variables['outlet_lat'][:]
self.outlet_mask = f.variables['outlet_mask'][:]
self.outlet_decomp_ind = f.variables['outlet_decomp_ind'][:]
self.unit_hydrograph = {}
for tracer in RVIC_TRACERS:
tname = 'unit_hydrograph_{0}'.format(tracer)
try:
self.unit_hydrograph[tracer] = f.variables[tname][:]
except KeyError:
log.warning('Could not find unit hydrograph var %s', tname)
log.warning('trying var name unit_hydrograph')
self.unit_hydrograph[tracer] = f.variables[
'unit_hydrograph'][:]
except:
raise ValueError('Cant find Unit Hydrograph Variable')
self.outlet_name = f.variables['outlet_name'][:]
self.RvicDomainFile = f.RvicDomainFile
self.RvicPourPointsFile = f.RvicPourPointsFile
self.RvicUHFile = f.RvicUHFile
self.RvicFdrFile = f.RvicFdrFile
self.file_format = file_format
try:
self.outlet_upstream_area = f.variables['outlet_upstream_area'][:]
except:
self.outlet_upstream_area = None
self.glob_atts = NcGlobals(title='RVIC restart file',
RvicPourPointsFile=f.RvicPourPointsFile,
RvicUHFile=f.RvicUHFile,
RvicFdrFile=f.RvicFdrFile,
RvicDomainFile=f.RvicDomainFile,
casename=case_name)
f.close()
# ------------------------------------------------------------ #
# Initialize state variables
self.ring = {}
for tracer in RVIC_TRACERS:
self.ring[tracer] = np.zeros((
self.full_time_length,
self.n_outlets,
),
dtype=np.float64)
# ------------------------------------------------------------ #
self._calendar = calendar
self.__fname_format = os.path.join(
out_dir, "%s.r.%%Y-%%m-%%d-%%H-%%M-%%S.nc" % (case_name))
# ------------------------------------------------------------ #
# CESM calendar key (only NO_LEAP_C, GREGORIAN are supported in CESM)
self._calendar_key = 0
for key, cals in CALENDAR_KEYS.iteritems():
if self._calendar in cals:
self._calendar_key = key
break
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# netCDF variable options
self.ncvaropts = {
'zlib': zlib,
'complevel': complevel,
'least_significant_digit': least_significant_digit
}
# ------------------------------------------------------------ #
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Check that dom file matches
def _check_domain_file(self, domain_file):
"""
Confirm that the dom files match in the parameter and domain files
"""
input_file = os.path.split(domain_file)[1]
log.info('domain_file: %s', input_file)
log.info('Parameter RvicDomainFile: %s', self.RvicDomainFile)
if input_file == self.RvicDomainFile:
log.info('dom files match in parameter and domain file')
else:
raise ValueError('dom files do not match in parameter and '
'domain file')
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def set_domain(self, dom_data, domain, lat0_is_min):
""" Set the domain size """
self._check_domain_file(domain['FILE_NAME'])
self.domain_shape = dom_data[domain['LAND_MASK_VAR']].shape
self.ysize = self.domain_shape[0]
self.xsize = self.domain_shape[1]
if self.source_y_ind.max() >= self.ysize:
raise ValueError('source_y_ind.max() ({0}) > domain ysize'
' ({1})'.format(self.source_y_ind, self.ysize))
if self.source_x_ind.max() >= self.xsize:
raise ValueError('source_x_ind.max() ({0}) > domain xsize'
' ({1})'.format(self.source_x_ind, self.xsize))
log.info('set domain')
if lat0_is_min:
log.info('Flipping Parameter File Y inds...')
self._flip_y_inds()
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Flip the y index order
def _flip_y_inds(self):
"""
Flip the y index order
"""
self.source_y_ind = self.ysize - self.source_y_ind - 1
self.outlet_y_ind = self.ysize - self.outlet_y_ind - 1
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Initilize State
def init_state(self, state_file, run_type, timestamp):
if run_type in ['startup', 'restart']:
log.info('reading state_file: %s', state_file)
f = Dataset(state_file, 'r')
for tracer in RVIC_TRACERS:
self.ring[tracer] = f.variables['{0}_ring'.format(tracer)][:]
file_timestamp = ord_to_datetime(
f.variables['time'][:],
f.variables['time'].units,
calendar=f.variables['time'].calendar)
if run_type == 'restart':
self.timestamp = file_timestamp
elif run_type == 'startup':
self.timestamp = timestamp
if timestamp != file_timestamp:
log.warning('restart timestamps do not match (%s, %s',
file_timestamp, self.timestamp)
log.warning('Runtype is startup so model will continue')
else:
raise ValueError('unknown run_type: {0}'.format(run_type))
# Check that timestep and outlet_decomp_ids match ParamFile
if f.variables['unit_hydrograph_dt'][:] != self.unit_hydrograph_dt:
raise ValueError('Timestep in Statefile does not match '
'timestep in ParamFile')
if not np.array_equal(f.variables['outlet_decomp_ind'][:],
self.outlet_decomp_ind):
raise ValueError('outlet_decomp_ind in Statefile does not '
'match ParamFile')
if f.RvicDomainFile != self.RvicDomainFile:
raise ValueError('RvicDomainFile in StateFile does not match '
'ParamFile')
f.close()
elif run_type == 'drystart':
log.info('run_type is drystart so no state_file will be read')
self.timestamp = timestamp
self.time_ord = date2num(self.timestamp,
TIMEUNITS,
calendar=self._calendar)
self._start_date = self.timestamp
self._start_ord = self.time_ord
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Convolve
def convolve(self, aggrunin, time_ord):
"""
This convoluition funciton works by looping over all points and doing
the convolution one timestep at a time. This is accomplished by
creating a convolution ring. Contributing flow from each timestep is
added to the convolution ring. The convolution ring is saved as the
state. The first column of values in the ring are the current runoff.
"""
# ------------------------------------------------------------ #
# Check that the time_ord is in sync
# This is the time at the start of the current step (end of last step)
if self.time_ord != time_ord:
log.error('rout_var.time_ord = %s, time_ord = %s', self.time_ord,
time_ord)
raise ValueError('rout_var.time_ord does not match the time_ord '
'passed in by the convolution call')
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Do the convolution
log.debug('convolving')
for tracer in RVIC_TRACERS:
# -------------------------------------------------------- #
# First update the ring
log.debug('rolling the ring')
# Zero out current ring
self.ring[tracer][0, :] = 0.
# Equivalent to Fortran 90 cshift function
self.ring[tracer] = np.roll(self.ring[tracer], -1, axis=0)
# -------------------------------------------------------- #
# -------------------------------------------------------- #
# C convolution call
rvic_convolve(self.n_sources, self.n_outlets, self.subset_length,
self.xsize, self.source2outlet_ind,
self.source_y_ind, self.source_x_ind,
self.source_time_offset,
self.unit_hydrograph[tracer][:, :], aggrunin[tracer],
self.ring[tracer][:, :])
# -------------------------------------------------------- #
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# move the time_ord forward
self.time_ord += self.unit_hydrograph_dt / SECSPERDAY
self.timestamp = ord_to_datetime(self.time_ord,
TIMEUNITS,
calendar=self._calendar)
return self.timestamp
# ------------------------------------------------------------ #
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def get_time_mode(self, cpl_secs_per_step):
"""
Determine the relationship between the coupling period and the unit-
hydrograph period. In cases where they do not match, the model will
aggregate the appropriate quantities before/after the confolution step.
"""
log.info('Coupling Timestep is (seconds): %s', cpl_secs_per_step)
log.info('RVIC Timestep is (seconds): %s', self.unit_hydrograph_dt)
if (self.unit_hydrograph_dt % cpl_secs_per_step == 0) and \
(self.unit_hydrograph_dt >= cpl_secs_per_step):
self.agg_tsteps = self.unit_hydrograph_dt / cpl_secs_per_step
else:
log.error('unit_hydrograph_dt must be a multiple of the '
'cpl_secs_per_step')
raise ValueError("Stopped due to error in determining agg_tsteps")
log.info('RVIC will run 1 time for every %i coupling periods',
self.agg_tsteps)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def get_rof(self):
"""Extract the current rof"""
rof = {}
for tracer in RVIC_TRACERS:
rof[tracer] = self.ring[tracer][0, :]
return rof # Current timestep flux (units=kg m-2 s-1)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def get_storage(self):
"""Extract the current storage"""
storage = {}
for tracer in RVIC_TRACERS:
storage[tracer] = self.ring[tracer].sum(axis=1)
return storage
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
def write_initial(self):
"""write initial flux"""
pass
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Write the current state
def write_restart(self, current_history_files, history_restart_files):
# ------------------------------------------------------------ #
# Open file
filename = self.timestamp.strftime(self.__fname_format)
f = Dataset(filename, 'w', self.file_format)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Time Variables
# Current time
time = f.createDimension('time', 1)
time = f.createVariable('time', NC_DOUBLE, ('time', ),
**self.ncvaropts)
time[:] = date2num(self.timestamp, TIMEUNITS, calendar=self._calendar)
for key, val in share.time.__dict__.iteritems():
if val:
setattr(time, key, val)
time.calendar = self._calendar
# Timesteps
timesteps = f.createDimension('timesteps', self.full_time_length)
timesteps = f.createVariable('timesteps', NC_DOUBLE, ('timesteps', ),
**self.ncvaropts)
timesteps[:] = np.arange(self.full_time_length)
for key, val in share.timesteps.__dict__.iteritems():
if val:
setattr(timesteps, key, val)
timesteps.timestep_length = 'unit_hydrograph_dt'
# UH timestep
unit_hydrograph_dt = f.createVariable('unit_hydrograph_dt', NC_DOUBLE,
(), **self.ncvaropts)
unit_hydrograph_dt[:] = self.unit_hydrograph_dt
for key, val in share.unit_hydrograph_dt.__dict__.iteritems():
if val:
setattr(unit_hydrograph_dt, key, val)
timemgr_rst_type = f.createVariable('timemgr_rst_type', NC_DOUBLE, (),
**self.ncvaropts)
timemgr_rst_type[:] = self._calendar_key
for key, val in share.timemgr_rst_type.__dict__.iteritems():
if val:
setattr(timemgr_rst_type, key, val)
timemgr_rst_step_sec = f.createVariable('timemgr_rst_step_sec',
NC_DOUBLE, (),
**self.ncvaropts)
timemgr_rst_step_sec[:] = self.unit_hydrograph_dt
for key, val in share.timemgr_rst_step_sec.__dict__.iteritems():
if val:
setattr(timemgr_rst_step_sec, key, val)
timemgr_rst_start_ymd = f.createVariable('timemgr_rst_start_ymd',
NC_DOUBLE, (),
**self.ncvaropts)
timemgr_rst_start_ymd[:] = self._start_date.year*10000 \
+ self._start_date.month*100 + self._start_date.day
for key, val in share.timemgr_rst_start_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_start_ymd, key, val)
timemgr_rst_start_tod = f.createVariable('timemgr_rst_start_tod',
NC_DOUBLE, (),
**self.ncvaropts)
timemgr_rst_start_tod[:] = (self._start_ord % 1) * SECSPERDAY
for key, val in share.timemgr_rst_start_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_start_tod, key, val)
timemgr_rst_ref_ymd = f.createVariable('timemgr_rst_ref_ymd',
NC_DOUBLE, (), **self.ncvaropts)
timemgr_rst_ref_ymd[:] = REFERENCE_DATE
for key, val in share.timemgr_rst_ref_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_ref_ymd, key, val)
timemgr_rst_ref_tod = f.createVariable('timemgr_rst_ref_tod',
NC_DOUBLE, (), **self.ncvaropts)
timemgr_rst_ref_tod[:] = REFERENCE_TIME
for key, val in share.timemgr_rst_ref_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_ref_tod, key, val)
timemgr_rst_curr_ymd = f.createVariable('timemgr_rst_curr_ymd',
NC_DOUBLE, (),
**self.ncvaropts)
timemgr_rst_curr_ymd[:] = self.timestamp.year*10000 + \
self.timestamp.month*100+self.timestamp.day
for key, val in share.timemgr_rst_curr_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_curr_ymd, key, val)
timemgr_rst_curr_tod = f.createVariable('timemgr_rst_curr_tod',
NC_DOUBLE, (),
**self.ncvaropts)
timemgr_rst_curr_tod[:] = (self.time_ord % 1) * SECSPERDAY
for key, val in share.timemgr_rst_curr_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_curr_tod, key, val)
# ------------------------------------------------------------ #
# Setup Tape Dimensions
coords = ('tapes', 'max_chars')
ntapes = f.createDimension(coords[0], len(history_restart_files))
ntapes = f.createDimension(coords[1], MAX_NC_CHARS)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Write Fields
locfnh = f.createVariable('locfnh', NC_CHAR, coords, **self.ncvaropts)
for i, string in enumerate(current_history_files):
locfnh[i, :] = stringtochar(np.array(string.ljust(MAX_NC_CHARS)))
locfnh.long_name = 'History filename'
locfnh.comment = 'This variable is NOT needed for startup or branch simulations'
locfnhr = f.createVariable('locfnhr', NC_CHAR, coords,
**self.ncvaropts)
for i, string in enumerate(history_restart_files):
locfnh[i, :] = stringtochar(np.array(string.ljust(MAX_NC_CHARS)))
locfnhr.long_name = 'History restart filename'
locfnhr.comment = 'This variable NOT needed for startup or branch simulations'
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Setup Point Dimensions
coords = ('outlets', )
outlets = f.createDimension(coords[0], self.n_outlets)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Write Fields
oyi = f.createVariable('outlet_y_ind', NC_INT, coords[0],
**self.ncvaropts)
oyi[:] = self.outlet_y_ind
for key, val in share.outlet_y_ind.__dict__.iteritems():
if val:
setattr(oyi, key, val)
oxi = f.createVariable('outlet_x_ind', NC_INT, coords[0],
**self.ncvaropts)
oxi[:] = self.outlet_x_ind
for key, val in share.outlet_x_ind.__dict__.iteritems():
if val:
setattr(oxi, key, val)
odi = f.createVariable('outlet_decomp_ind', NC_INT, coords[0],
**self.ncvaropts)
odi[:] = self.outlet_decomp_ind
for key, val in share.outlet_decomp_ind.__dict__.iteritems():
if val:
setattr(odi, key, val)
tcoords = ('timesteps', ) + coords
for tracer in RVIC_TRACERS:
ring = f.createVariable('{0}_ring'.format(tracer), NC_DOUBLE,
tcoords, **self.ncvaropts)
ring[:, :] = self.ring[tracer][:, :]
for key, val in share.ring.__dict__.iteritems():
if val:
setattr(ring, key, val)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# write global attributes
self.glob_atts.update()
for key, val in self.glob_atts.atts.iteritems():
if val:
setattr(f, key, val)
# ------------------------------------------------------------ #
f.close()
log.info('Finished writing %s', filename)
return filename
def finish_params(outlets, dom_data, config_dict, directories):
"""
Adjust the unit hydrographs and pack for parameter file
"""
options = config_dict['OPTIONS']
routing = config_dict['ROUTING']
domain = config_dict['DOMAIN']
dom_area = domain['AREA_VAR']
dom_frac = domain['FRACTION_VAR']
# ------------------------------------------------------------ #
# netCDF variable options
ncvaropts = {}
if 'NETCDF_ZLIB' in options:
ncvaropts['zlib'] = options['NETCDF_ZLIB']
if 'NETCDF_COMPLEVEL' in options:
ncvaropts['complevel'] = options['NETCDF_COMPLEVEL']
if 'NETCDF_SIGFIGS' in options:
ncvaropts['least_significant_digit'] = options['NETCDF_SIGFIGS']
# ------------------------------------------------------------ #
# ---------------------------------------------------------------- #
# subset (shorten time base)
if options['SUBSET_DAYS'] and \
options['SUBSET_DAYS'] < routing['BASIN_FLOWDAYS']:
subset_length = options['SUBSET_DAYS']*SECSPERDAY/routing['OUTPUT_INTERVAL']
outlets, full_time_length, \
before, after = subset(outlets, subset_length=subset_length)
slc = slice(min(len(before), 1000))
log.debug('plotting unit hydrograph timeseries now for before'
' / after subseting')
title = 'UHS before subset'
pfname = plots.uhs(before[slc], title, options['CASEID'],
directories['plots'])
log.info('%s Plot: %s', title, pfname)
title = 'UHS after subset'
pfname = plots.uhs(after[slc], title, options['CASEID'],
directories['plots'])
log.info('%s Plot: %s', title, pfname)
else:
log.info('Not subsetting because either SUBSET_DAYS is null or '
'SUBSET_DAYS<BASIN_FLOWDAYS')
for outlet in outlets.itervalues():
outlet.offset = np.zeros(outlet.unit_hydrograph.shape[1],
dtype=np.int16)
full_time_length = outlet.unit_hydrograph.shape[0]
subset_length = full_time_length
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# adjust fractions
if options['CONSTRAIN_FRACTIONS']:
adjust = True
log.info('Adjusting Fractions to be less than or equal to '
'domain fractions')
else:
adjust = False
outlets, plot_dict = adjust_fractions(outlets,
dom_data[domain['FRACTION_VAR']],
adjust=adjust)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Calculate the upstream area and upstream grid cells
# The upstream_area must be calculated after adjust_fractions
for i, outlet in outlets.iteritems():
outlet.upstream_gridcells = len(outlet.y_source)
outlet.upstream_area = np.sum(dom_data[dom_area][outlet.y_source, outlet.x_source] *
dom_data[dom_frac][outlet.y_source, outlet.x_source])
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Group
grouped_data = group(outlets, subset_length)
# unpack grouped data
unit_hydrograph = grouped_data['unit_hydrograph']
frac_sources = grouped_data['frac_sources']
source_lon = grouped_data['source_lon']
source_lat = grouped_data['source_lat']
source_x_ind = grouped_data['source_x_ind']
source_y_ind = grouped_data['source_y_ind']
source_decomp_ind = grouped_data['source_decomp_ind']
source_time_offset = grouped_data['source_time_offset']
source2outlet_ind = grouped_data['source2outlet_ind']
outlet_lon = grouped_data['outlet_lon']
outlet_lat = grouped_data['outlet_lat']
outlet_x_ind = grouped_data['outlet_x_ind']
outlet_y_ind = grouped_data['outlet_y_ind']
outlet_decomp_ind = grouped_data['outlet_decomp_ind']
outlet_number = grouped_data['outlet_number']
outlet_name = grouped_data['outlet_name']
outlet_upstream_area = grouped_data['outlet_upstream_area']
outlet_upstream_gridcells = grouped_data['outlet_upstream_gridcells']
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Adjust Unit Hydrographs for differences in source/outlet areas and
# fractions
area = dom_data[domain['AREA_VAR']]
if outlet_y_ind.ndim == 0 or outlet_x_ind.ndim == 0:
for source, outlet in enumerate(source2outlet_ind):
unit_hydrograph[:, source] *= area[source_y_ind[source],
source_x_ind[source]]
unit_hydrograph[:, source] /= area[outlet_y_ind[()],
outlet_x_ind[()]]
unit_hydrograph[:, source] *= frac_sources[source]
else:
for source, outlet in enumerate(source2outlet_ind):
unit_hydrograph[:, source] *= area[source_y_ind[source],
source_x_ind[source]]
unit_hydrograph[:, source] /= area[outlet_y_ind[outlet],
outlet_x_ind[outlet]]
unit_hydrograph[:, source] *= frac_sources[source]
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Make diagnostic plots
sum_after = np.zeros(dom_data[domain['FRACTION_VAR']].shape)
for i, (y, x) in enumerate(zip(source_y_ind, source_x_ind)):
sum_after[y, x] += unit_hydrograph[:, i].sum()
plot_dict['Sum UH Final'] = sum_after
dom_y = dom_data[domain['LATITUDE_VAR']]
dom_x = dom_data[domain['LONGITUDE_VAR']]
for title, data in plot_dict.iteritems():
pfname = plots.fractions(data, dom_x, dom_y, title, options['CASEID'],
directories['plots'])
log.info('%s Plot: %s', title, pfname)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# fill in some misc arrays
if outlet_y_ind.ndim == 0:
numoutlets = 1
else:
numoutlets = len(outlet_lon)
outlet_mask = np.zeros(numoutlets)
newshape = unit_hydrograph.shape + (1, )
unit_hydrograph = unit_hydrograph.reshape(newshape)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Write parameter file
today = date.today().strftime('%Y%m%d')
param_file = os.path.join(directories['params'],
'{0}.rvic.prm.{1}.{2}.'
'nc'.format(options['CASEID'],
options['GRIDID'],
today))
if 'NEW_DOMAIN' in config_dict.keys():
dom_file_name = config_dict['NEW_DOMAIN']['FILE_NAME']
else:
dom_file_name = config_dict['DOMAIN']['FILE_NAME']
glob_atts = NcGlobals(title='RVIC parameter file',
RvicPourPointsFile=os.path.split(config_dict['POUR_POINTS']['FILE_NAME'])[1],
RvicUHFile=os.path.split(config_dict['UH_BOX']['FILE_NAME'])[1],
RvicFdrFile=os.path.split(routing['FILE_NAME'])[1],
RvicDomainFile=os.path.split(dom_file_name)[1])
write_param_file(param_file,
nc_format=options['NETCDF_FORMAT'],
glob_atts=glob_atts,
full_time_length=full_time_length,
subset_length=subset_length,
unit_hydrograph_dt=routing['OUTPUT_INTERVAL'],
outlet_lon=outlet_lon,
outlet_lat=outlet_lat,
outlet_x_ind=outlet_x_ind,
outlet_y_ind=outlet_y_ind,
outlet_decomp_ind=outlet_decomp_ind,
outlet_number=outlet_number,
outlet_mask=outlet_mask,
outlet_name=outlet_name,
outlet_upstream_gridcells=outlet_upstream_gridcells,
outlet_upstream_area=outlet_upstream_area,
source_lon=source_lon,
source_lat=source_lat,
source_x_ind=source_x_ind,
source_y_ind=source_y_ind,
source_decomp_ind=source_decomp_ind,
source_time_offset=source_time_offset,
source2outlet_ind=source2outlet_ind,
unit_hydrograph=unit_hydrograph,
**ncvaropts)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# write a summary of what was done to the log file.
log.info('Parameter file includes %i outlets', len(outlets))
log.info('Parameter file includes %i Source Points', len(source_lon))
# ---------------------------------------------------------------- #
return param_file, today
def write_param_file(file_name,
nc_format='NETCDF3_CLASSIC',
glob_atts=NcGlobals(),
full_time_length=None,
subset_length=None,
unit_hydrograph_dt=None,
outlet_lon=None,
outlet_lat=None,
outlet_x_ind=None,
outlet_y_ind=None,
outlet_decomp_ind=None,
outlet_number=None,
outlet_mask=None,
outlet_name=None,
outlet_upstream_gridcells=None,
outlet_upstream_area=None,
source_lon=None,
source_lat=None,
source_x_ind=None,
source_y_ind=None,
source_decomp_ind=None,
source_time_offset=None,
source2outlet_ind=None,
source_tracer=None,
unit_hydrograph=None,
zlib=True,
complevel=4,
least_significant_digit=None):
""" Write a standard RVIC Parameter file """
# ---------------------------------------------------------------- #
# netCDF variable options
ncvaropts = {
'zlib': zlib,
'complevel': complevel,
'least_significant_digit': least_significant_digit
}
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Open file
f = Dataset(file_name, 'w', format=nc_format)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Time Variables
# Timesteps
timesteps = f.createDimension('timesteps', subset_length)
timesteps = f.createVariable('timesteps', NC_DOUBLE, ('timesteps', ),
**ncvaropts)
timesteps[:] = np.arange(subset_length)
for key, val in share.timesteps.__dict__.iteritems():
if val:
setattr(timesteps, key, val)
timesteps.timestep_length = 'unit_hydrograph_dt'
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# write global attributes
glob_atts.update()
for key, val in glob_atts.atts.iteritems():
if val:
setattr(f, key, val)
f.featureType = "timeSeries"
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# 0-D variables
# Full time length (size of ring)
ftl = f.createVariable('full_time_length', NC_INT, (), **ncvaropts)
ftl[:] = full_time_length
for key, val in share.full_time_length.__dict__.iteritems():
if val:
setattr(ftl, key, val)
# Subset Length
sl = f.createVariable('subset_length', NC_INT, (), **ncvaropts)
sl[:] = subset_length
for key, val in share.subset_length.__dict__.iteritems():
if val:
setattr(sl, key, val)
# UH timestep
uh_dt = f.createVariable('unit_hydrograph_dt', NC_DOUBLE, (), **ncvaropts)
uh_dt[:] = unit_hydrograph_dt
for key, val in share.unit_hydrograph_dt.__dict__.iteritems():
if val:
setattr(uh_dt, key, val)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Outlet Dimensions
if outlet_y_ind.ndim == 0:
numoutlets = 1
outlet_name = np.array([outlet_name])
else:
numoutlets = len(outlet_lon)
ocoords = ('outlets', )
outlets = f.createDimension(ocoords[0], numoutlets)
nocoords = ocoords + ('nc_chars', )
char_names = stringtochar(outlet_name)
chars = f.createDimension(nocoords[1], char_names.shape[1])
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# 1-D Outlet Variables
# Outlet Cell Longitudes
olon = f.createVariable('outlet_lon', NC_DOUBLE, ocoords, **ncvaropts)
olon[:] = outlet_lon
for key, val in share.outlet_lon.__dict__.iteritems():
if val:
setattr(olon, key, val)
# Outlet Cell Latitudes
olat = f.createVariable('outlet_lat', NC_DOUBLE, ocoords, **ncvaropts)
olat[:] = outlet_lat
for key, val in share.outlet_lat.__dict__.iteritems():
if val:
setattr(olat, key, val)
# Outlet Cell X Indicies
oxi = f.createVariable('outlet_x_ind', NC_INT, ocoords, **ncvaropts)
oxi[:] = outlet_x_ind
for key, val in share.outlet_x_ind.__dict__.iteritems():
if val:
setattr(oxi, key, val)
# Outlet Cell Y Indicies
oyi = f.createVariable('outlet_y_ind', NC_INT, ocoords, **ncvaropts)
oyi[:] = outlet_y_ind
for key, val in share.outlet_y_ind.__dict__.iteritems():
if val:
setattr(oyi, key, val)
# Outlet Cell Decomp IDs
odi = f.createVariable('outlet_decomp_ind', NC_INT, ocoords, **ncvaropts)
odi[:] = outlet_decomp_ind
for key, val in share.outlet_decomp_ind.__dict__.iteritems():
if val:
setattr(odi, key, val)
# Outlet Cell Number
on = f.createVariable('outlet_number', NC_INT, ocoords, **ncvaropts)
on[:] = outlet_number
for key, val in share.outlet_number.__dict__.iteritems():
if val:
setattr(on, key, val)
# Outlet Mask
om = f.createVariable('outlet_mask', NC_INT, ocoords, **ncvaropts)
om[:] = outlet_mask
for key, val in share.outlet_mask.__dict__.iteritems():
if val:
setattr(om, key, val)
# Outlet Upstream area
oua = f.createVariable('outlet_upstream_area', NC_DOUBLE, ocoords,
**ncvaropts)
oua[:] = outlet_upstream_area
for key, val in share.outlet_upstream_area.__dict__.iteritems():
if val:
setattr(oua, key, val)
# Outlet Upstream grid cells
oug = f.createVariable('outlet_upstream_gridcells', NC_INT, ocoords,
**ncvaropts)
oug[:] = outlet_upstream_gridcells
for key, val in share.outlet_upstream_gridcells.__dict__.iteritems():
if val:
setattr(oug, key, val)
# Outlet Names
onm = f.createVariable('outlet_name', NC_CHAR, nocoords)
onm[:, :] = char_names
for key, val in share.outlet_name.__dict__.iteritems():
if val:
setattr(onm, key, val)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Source Dimension
scoords = ('sources', )
sources = f.createDimension(scoords[0], len(source_lon))
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# 1D Source Variables
# Source Cell Longitudes
slon = f.createVariable('source_lon', NC_DOUBLE, scoords, **ncvaropts)
slon[:] = source_lon
for key, val in share.source_lon.__dict__.iteritems():
if val:
setattr(slon, key, val)
# Source Cell Latitudes
slat = f.createVariable('source_lat', NC_DOUBLE, scoords, **ncvaropts)
slat[:] = source_lat
for key, val in share.source_lat.__dict__.iteritems():
if val:
setattr(slat, key, val)
# Source Cell X Indicies
sxi = f.createVariable('source_x_ind', NC_INT, scoords, **ncvaropts)
sxi[:] = source_x_ind
for key, val in share.source_x_ind.__dict__.iteritems():
if val:
setattr(sxi, key, val)
# Source Cell Y Indicies
syi = f.createVariable('source_y_ind', NC_INT, scoords, **ncvaropts)
syi[:] = source_y_ind
for key, val in share.source_y_ind.__dict__.iteritems():
if val:
setattr(syi, key, val)
# Source Cell Decomp IDs
sdi = f.createVariable('source_decomp_ind', NC_INT, scoords, **ncvaropts)
sdi[:] = source_decomp_ind
for key, val in share.source_decomp_ind.__dict__.iteritems():
if val:
setattr(sdi, key, val)
# Source Cell Time Offset
sto = f.createVariable('source_time_offset', NC_INT, scoords, **ncvaropts)
sto[:] = source_time_offset
for key, val in share.source_time_offset.__dict__.iteritems():
if val:
setattr(sto, key, val)
# Source to Outlet Index Mapping
s2o = f.createVariable('source2outlet_ind', NC_INT, scoords, **ncvaropts)
s2o[:] = source2outlet_ind
for key, val in share.source2outlet_ind.__dict__.iteritems():
if val:
setattr(s2o, key, val)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# 3-D Source Variables
uhcords = ('timesteps', ) + scoords + ('tracers', )
tracers = f.createDimension(uhcords[2], 1)
# Unit Hydrographs
uhs = f.createVariable('unit_hydrograph', NC_DOUBLE, uhcords, **ncvaropts)
uhs[:, :] = unit_hydrograph
for key, val in share.unit_hydrograph.__dict__.iteritems():
if val:
setattr(uhs, key, val)
# ---------------------------------------------------------------- #
f.close()
log.info('Finished writing %s' % file_name)
class Rvar(object):
""" Creates a RVIC structure """
# ---------------------------------------------------------------- #
# Initialize
def __init__(self, param_file, case_name, calendar, out_dir, file_format):
self.param_file = param_file
f = Dataset(param_file, 'r+')
self.n_sources = len(f.dimensions['sources'])
self.n_outlets = len(f.dimensions['outlets'])
self.subset_length = f.variables['subset_length'][0]
self.full_time_length = f.variables['full_time_length'][0]
self.unit_hydrograph_dt = f.variables['unit_hydrograph_dt'][0]
self.source_lon = f.variables['source_lon'][:]
self.source_lat = f.variables['source_lat'][:]
self.source_x_ind = f.variables['source_x_ind'][:]
self.source_y_ind = f.variables['source_y_ind'][:]
self.source_time_offset = f.variables['source_time_offset'][:]
self.source2outlet_ind = f.variables['source2outlet_ind'][:]
self.outlet_x_ind = f.variables['outlet_x_ind'][:]
self.outlet_y_ind = f.variables['outlet_y_ind'][:]
self.outlet_lon = f.variables['outlet_lon'][:]
self.outlet_lat = f.variables['outlet_lat'][:]
self.outlet_mask = f.variables['outlet_mask'][:]
self.outlet_decomp_ind = f.variables['outlet_decomp_ind'][:]
self.unit_hydrograph = f.variables['unit_hydrograph'][:]
self.RvicDomainFile = f.RvicDomainFile
self.RvicPourPointsFile = f.RvicPourPointsFile
self.RvicUHFile = f.RvicUHFile
self.RvicFdrFile = f.RvicFdrFile
self.file_format = file_format
self.glob_atts = NcGlobals(title='RVIC restart file',
RvicPourPointsFile=f.RvicPourPointsFile,
RvicUHFile=f.RvicUHFile,
RvicFdrFile=f.RvicFdrFile,
RvicDomainFile=f.RvicDomainFile,
casename=case_name)
f.close()
# ------------------------------------------------------------ #
# Initialize state variables
self.ring = np.zeros((self.full_time_length, self.n_outlets, len(RVIC_TRACERS)))
# ------------------------------------------------------------ #
self._calendar = calendar
self.__fname_format = os.path.join(out_dir, "%s.r.%%Y-%%m-%%d-%%H-%%M-%%S.nc" % (case_name))
# CESM calendar key (only NO_LEAP_C, GREGORIAN are supported in CESM)
self._calendar_key = 0
for key, cals in CALENDAR_KEYS.iteritems():
if self._calendar in cals:
self._calendar_key = key
break
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Check that grid file matches
def check_grid_file(self, domain_file):
"""Confirm that the grid files match in the parameter and domain files"""
input_file = os.path.split(domain_file)[1]
log.info('domain_file: %s' % input_file)
log.info('Parameter RvicDomainFile: %s' % self.RvicDomainFile)
if input_file == self.RvicDomainFile:
log.info('Grid files match in parameter and domain file')
else:
raise ValueError('Grid files do not match in parameter and domain file')
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Initilize State
def init_state(self, state_file, run_type, timestamp):
if run_type in ['startup', 'restart']:
log.info('reading state_file: %s' %state_file)
f = Dataset(state_file, 'r+')
self.ring = f.variables['ring'][:]
file_timestamp = ord_to_datetime(f.variables['time'][:], f.variables['time'].units, calendar=f.variables['time'].calendar)
if run_type == 'restart':
self.timestamp = file_timestamp
elif run_type == 'startup':
self.timestamp = timestamp
if timestamp != file_timestamp:
log.warning('restart timestamps do not match (%s, %s', file_timestamp, self.timestamp)
log.warning('Runtype is startup so model will continue')
else:
raise ValueError('unknown run_type: %s' %run_type)
# Check that timestep and outlet_decomp_ids match ParamFile
if f.variables['unit_hydrograph_dt'][:] != self.unit_hydrograph_dt:
raise ValueError('Timestep in Statefile does not match timestep in ParamFile')
if not np.array_equal(f.variables['outlet_decomp_ind'][:], self.outlet_decomp_ind):
raise ValueError('outlet_decomp_ind in Statefile does not match ParamFile')
if f.RvicDomainFile != self.RvicDomainFile:
raise ValueError('RvicDomainFile in StateFile does not match ParamFile')
f.close()
elif run_type == 'drystart':
log.info('run_type is drystart so no state_file will be read')
self.timestamp = timestamp
self.time_ord = date2num(self.timestamp, TIMEUNITS, calendar=self._calendar)
self._start_date = self.timestamp
self._start_ord = self.time_ord
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Convolve
def convolve(self, aggrunin, time_ord):
"""
This convoluition funciton works by looping over all points and doing the
convolution one timestep at a time. This is accomplished by creating an
convolution ring. Contributing flow from each timestep is added to the
convolution ring. The convolution ring is saved as the state. The first
column of values in the ring are the current runoff.
"""
# ------------------------------------------------------------ #
# Check that the time_ord is in sync
# This is the time at the start of the current step (end of last step)
if self.time_ord != time_ord:
log.error('rout_var.time_ord = %s, time_ord = %s' %(self.time_ord, time_ord))
raise ValueError('rout_var.time_ord does not match the time_ord passed in by the convolution call')
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# First update the ring
log.debug('rolling the ring')
self.ring[0, :, 0] = 0 # Zero out current ring
self.ring = np.roll(self.ring, 1, axis=0) # Equivalent to Fortran 90 cshift function
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Do the convolution
log.debug('convolving')
# this matches the fortran implementation, it may be faster to use np.convolve but testing
# can be done later
# also this is where the parallelization will happen
for nt, tracer in enumerate(RVIC_TRACERS):
for s, outlet in enumerate(self.source2outlet_ind): # loop over all source points
y = self.source_y_ind[s]
x = self.source_x_ind[s]
for i in xrange(self.subset_length):
j = i + self.source_time_offset[s]
self.ring[j, outlet, nt] = self.ring[j, outlet, nt] + (self.unit_hydrograph[i, s, nt] * aggrunin[tracer][y, x])
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# move the time_ord forward
self.time_ord += self.unit_hydrograph_dt / SECSPERDAY
self.timestamp = ord_to_datetime(self.time_ord, TIMEUNITS, calendar=self._calendar)
return self.timestamp
# ------------------------------------------------------------ #
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Extract the current rof
def get_rof(self):
return self.ring[0, :, 0] # Current timestep flux (units=kg m-2 s-1)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Extract the current storage
def get_storage(self):
return self.ring.sum(axis=1)
# ---------------------------------------------------------------- #
# ---------------------------------------------------------------- #
# Write the current state
def write_restart(self, current_history_files, history_restart_files):
# ------------------------------------------------------------ #
# Open file
filename = self.timestamp.strftime(self.__fname_format)
f = Dataset(filename, 'w', self.file_format)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Time Variables
# Current time
time = f.createDimension('time', 1)
time = f.createVariable('time', NC_DOUBLE, ('time',))
time[:] = date2num(self.timestamp, TIMEUNITS, calendar=self._calendar)
for key, val in share.time.__dict__.iteritems():
if val:
setattr(time, key, val)
time.calendar = self._calendar
# Timesteps
timesteps = f.createDimension('timesteps', self.full_time_length)
timesteps = f.createVariable('timesteps', NC_DOUBLE, ('timesteps',))
timesteps[:] = np.arange(self.full_time_length)
for key, val in share.timesteps.__dict__.iteritems():
if val:
setattr(timesteps, key, val)
timesteps.timestep_length = 'unit_hydrograph_dt'
# UH timestep
unit_hydrograph_dt = f.createVariable('unit_hydrograph_dt', NC_DOUBLE, ())
unit_hydrograph_dt[:] = self.unit_hydrograph_dt
for key, val in share.unit_hydrograph_dt.__dict__.iteritems():
if val:
setattr(unit_hydrograph_dt, key, val)
timemgr_rst_type = f.createVariable('timemgr_rst_type', NC_DOUBLE, ())
timemgr_rst_type[:] = self._calendar_key
for key, val in share.timemgr_rst_type.__dict__.iteritems():
if val:
setattr(timemgr_rst_type, key, val)
timemgr_rst_step_sec = f.createVariable('timemgr_rst_step_sec', NC_DOUBLE, ())
timemgr_rst_step_sec[:] = unit_hydrograph_dt
for key, val in share.timemgr_rst_step_sec.__dict__.iteritems():
if val:
setattr(timemgr_rst_step_sec, key, val)
timemgr_rst_start_ymd = f.createVariable('timemgr_rst_start_ymd', NC_DOUBLE, ())
timemgr_rst_start_ymd[:] = self._start_date.year*10000+self._start_date.month*100+self._start_date.day
for key, val in share.timemgr_rst_start_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_start_ymd, key, val)
timemgr_rst_start_tod = f.createVariable('timemgr_rst_start_tod', NC_DOUBLE, ())
timemgr_rst_start_tod[:] = (self._start_ord%1)*SECSPERDAY
for key, val in share.timemgr_rst_start_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_start_tod, key, val)
timemgr_rst_ref_ymd = f.createVariable('timemgr_rst_ref_ymd', NC_DOUBLE, ())
timemgr_rst_ref_ymd[:] = REFERENCE_DATE
for key, val in share.timemgr_rst_ref_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_ref_ymd, key, val)
timemgr_rst_ref_tod = f.createVariable('timemgr_rst_ref_tod', NC_DOUBLE, ())
timemgr_rst_ref_tod[:] = REFERENCE_TIME
for key, val in share.timemgr_rst_ref_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_ref_tod, key, val)
timemgr_rst_curr_ymd = f.createVariable('timemgr_rst_curr_ymd', NC_DOUBLE, ())
timemgr_rst_curr_ymd[:] = self.timestamp.year*10000+self.timestamp.month*100+self.timestamp.day
for key, val in share.timemgr_rst_curr_ymd.__dict__.iteritems():
if val:
setattr(timemgr_rst_curr_ymd, key, val)
timemgr_rst_curr_tod = f.createVariable('timemgr_rst_curr_tod', NC_DOUBLE, ())
timemgr_rst_curr_tod[:] = (self.time_ord%1)*SECSPERDAY
for key, val in share.timemgr_rst_curr_tod.__dict__.iteritems():
if val:
setattr(timemgr_rst_curr_tod, key, val)
# ------------------------------------------------------------ #
# Setup Tape Dimensions
coords = ('tapes', 'mak_chars')
ntapes = f.createDimension(coords[0], len(history_restart_files))
ntapes = f.createDimension(coords[1], MAX_NC_CHARS)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Write Fields
locfnh = f.createVariable('locfnh', NC_CHAR, ('ntapes', 'max_chars',))
locfnh[:] = current_history_files
locfnh.long_name = 'History filename'
locfnh.comment = 'This variable NOT needed for startup or branch simulations'
locfnhr = f.createVariable('locfnhr', NC_CHAR, ('ntapes', 'max_chars',))
locfnhr[:] = history_restart_files
locfnhr.long_name = 'Restart history filename'
locfnhr.comment = 'This variable NOT needed for startup or branch simulations'
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Setup Point Dimensions
coords = ('outlets', 'tracers')
outlets = f.createDimension(coords[0], self.n_outlets)
tracers = f.createDimension(coords[1], len(RVIC_TRACERS))
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# Write Fields
oyi = f.createVariable('outlet_y_ind', NC_INT, coords[0])
oyi[:] = self.outlet_y_ind
for key, val in share.outlet_y_ind.__dict__.iteritems():
if val:
setattr(oyi, key, val)
oxi = f.createVariable('outlet_x_ind', NC_INT, coords[0])
oxi[:] = self.outlet_x_ind
for key, val in share.outlet_x_ind.__dict__.iteritems():
if val:
setattr(oxi, key, val)
odi = f.createVariable('outlet_decomp_ind', NC_INT, coords[0])
odi[:] = self.outlet_decomp_ind
for key, val in share.outlet_decomp_ind.__dict__.iteritems():
if val:
setattr(odi, key, val)
tcoords = ('timesteps',) + coords
ring = f.createVariable('ring', NC_DOUBLE, tcoords)
ring[:, :, :] = self.ring
for key, val in share.ring.__dict__.iteritems():
if val:
setattr(ring, key, val)
# ------------------------------------------------------------ #
# ------------------------------------------------------------ #
# write global attributes
self.glob_atts.update()
for key, val in self.glob_atts.__dict__.iteritems():
if val:
setattr(f, key, val)
# ------------------------------------------------------------ #
f.close()
log.info('Finished writing %s' % filename)
return filename
